aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2022-02-21firmware: arm_scmi: Add atomic mode support to virtio transportCristian Marussi3-20/+391
Add support for .mark_txdone and .poll_done transport operations to SCMI VirtIO transport as pre-requisites to enable atomic operations. Add a Kernel configuration option to enable SCMI VirtIO transport polling and atomic mode for selected SCMI transactions while leaving it default disabled. Link: https://lore.kernel.org/r/20220217131234.50328-4-cristian.marussi@arm.com Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Skalkin <igor.skalkin@opensynergy.com> Cc: Peter Hilber <peter.hilber@opensynergy.com> Cc: virtualization@lists.linux-foundation.org Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-02-21firmware: arm_scmi: Review virtio free_list handlingCristian Marussi1-31/+57
Add a new spinlock dedicated to the access of the TX free list and a couple of helpers to get and put messages back and forth from the free_list. Link: https://lore.kernel.org/r/20220217131234.50328-3-cristian.marussi@arm.com Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Skalkin <igor.skalkin@opensynergy.com> Cc: Peter Hilber <peter.hilber@opensynergy.com> Cc: virtualization@lists.linux-foundation.org Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-02-21firmware: arm_scmi: Add a virtio channel refcountCristian Marussi1-51/+92
Currently SCMI VirtIO channels are marked with a ready flag and related lock to track channel lifetime and support proper synchronization at shutdown when virtqueues have to be stopped. This leads to some extended spinlocked sections with IRQs off on the RX path to keep hold of the ready flag and does not scale well especially when SCMI VirtIO polling mode will be introduced. Add an SCMI VirtIO channel dedicated refcount to track active users on both the TX and the RX path and properly enforce synchronization and cleanup at shutdown, inhibiting further usage of the channel once freed. Link: https://lore.kernel.org/r/20220217131234.50328-2-cristian.marussi@arm.com Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Skalkin <igor.skalkin@opensynergy.com> Cc: Peter Hilber <peter.hilber@opensynergy.com> Cc: virtualization@lists.linux-foundation.org Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-02-21ath11k: Fix frames flush failure caused by deadlockBaochen Qiang1-1/+1
We are seeing below warnings: kernel: [25393.301506] ath11k_pci 0000:01:00.0: failed to flush mgmt transmit queue 0 kernel: [25398.421509] ath11k_pci 0000:01:00.0: failed to flush mgmt transmit queue 0 kernel: [25398.421831] ath11k_pci 0000:01:00.0: dropping mgmt frame for vdev 0, is_started 0 this means ath11k fails to flush mgmt. frames because wmi_mgmt_tx_work has no chance to run in 5 seconds. By setting /proc/sys/kernel/hung_task_timeout_secs to 20 and increasing ATH11K_FLUSH_TIMEOUT to 50 we get below warnings: kernel: [ 120.763160] INFO: task wpa_supplicant:924 blocked for more than 20 seconds. kernel: [ 120.763169] Not tainted 5.10.90 #12 kernel: [ 120.763177] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kernel: [ 120.763186] task:wpa_supplicant state:D stack: 0 pid: 924 ppid: 1 flags:0x000043a0 kernel: [ 120.763201] Call Trace: kernel: [ 120.763214] __schedule+0x785/0x12fa kernel: [ 120.763224] ? lockdep_hardirqs_on_prepare+0xe2/0x1bb kernel: [ 120.763242] schedule+0x7e/0xa1 kernel: [ 120.763253] schedule_timeout+0x98/0xfe kernel: [ 120.763266] ? run_local_timers+0x4a/0x4a kernel: [ 120.763291] ath11k_mac_flush_tx_complete+0x197/0x2b1 [ath11k 13c3a9bf37790f4ac8103b3decf7ab4008ac314a] kernel: [ 120.763306] ? init_wait_entry+0x2e/0x2e kernel: [ 120.763343] __ieee80211_flush_queues+0x167/0x21f [mac80211 335da900954f1c5ea7f1613d92088ce83342042c] kernel: [ 120.763378] __ieee80211_recalc_idle+0x105/0x125 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c] kernel: [ 120.763411] ieee80211_recalc_idle+0x14/0x27 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c] kernel: [ 120.763441] ieee80211_free_chanctx+0x77/0xa2 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c] kernel: [ 120.763473] __ieee80211_vif_release_channel+0x100/0x131 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c] kernel: [ 120.763540] ieee80211_vif_release_channel+0x66/0x81 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c] kernel: [ 120.763572] ieee80211_destroy_auth_data+0xa3/0xe6 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c] kernel: [ 120.763612] ieee80211_mgd_deauth+0x178/0x29b [mac80211 335da900954f1c5ea7f1613d92088ce83342042c] kernel: [ 120.763654] cfg80211_mlme_deauth+0x1a8/0x22c [cfg80211 8945aa5bc2af5f6972336665d8ad6f9c191ad5be] kernel: [ 120.763697] nl80211_deauthenticate+0xfa/0x123 [cfg80211 8945aa5bc2af5f6972336665d8ad6f9c191ad5be] kernel: [ 120.763715] genl_rcv_msg+0x392/0x3c2 kernel: [ 120.763750] ? nl80211_associate+0x432/0x432 [cfg80211 8945aa5bc2af5f6972336665d8ad6f9c191ad5be] kernel: [ 120.763782] ? nl80211_associate+0x432/0x432 [cfg80211 8945aa5bc2af5f6972336665d8ad6f9c191ad5be] kernel: [ 120.763802] ? genl_rcv+0x36/0x36 kernel: [ 120.763814] netlink_rcv_skb+0x89/0xf7 kernel: [ 120.763829] genl_rcv+0x28/0x36 kernel: [ 120.763840] netlink_unicast+0x179/0x24b kernel: [ 120.763854] netlink_sendmsg+0x393/0x401 kernel: [ 120.763872] sock_sendmsg+0x72/0x76 kernel: [ 120.763886] ____sys_sendmsg+0x170/0x1e6 kernel: [ 120.763897] ? copy_msghdr_from_user+0x7a/0xa2 kernel: [ 120.763914] ___sys_sendmsg+0x95/0xd1 kernel: [ 120.763940] __sys_sendmsg+0x85/0xbf kernel: [ 120.763956] do_syscall_64+0x43/0x55 kernel: [ 120.763966] entry_SYSCALL_64_after_hwframe+0x44/0xa9 kernel: [ 120.763977] RIP: 0033:0x79089f3fcc83 kernel: [ 120.763986] RSP: 002b:00007ffe604f0508 EFLAGS: 00000246 ORIG_RAX: 000000000000002e kernel: [ 120.763997] RAX: ffffffffffffffda RBX: 000059b40e987690 RCX: 000079089f3fcc83 kernel: [ 120.764006] RDX: 0000000000000000 RSI: 00007ffe604f0558 RDI: 0000000000000009 kernel: [ 120.764014] RBP: 00007ffe604f0540 R08: 0000000000000004 R09: 0000000000400000 kernel: [ 120.764023] R10: 00007ffe604f0638 R11: 0000000000000246 R12: 000059b40ea04980 kernel: [ 120.764032] R13: 00007ffe604f0638 R14: 000059b40e98c360 R15: 00007ffe604f0558 ... kernel: [ 120.765230] INFO: task kworker/u32:26:4239 blocked for more than 20 seconds. kernel: [ 120.765238] Not tainted 5.10.90 #12 kernel: [ 120.765245] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kernel: [ 120.765253] task:kworker/u32:26 state:D stack: 0 pid: 4239 ppid: 2 flags:0x00004080 kernel: [ 120.765284] Workqueue: phy0 ieee80211_iface_work [mac80211] kernel: [ 120.765295] Call Trace: kernel: [ 120.765306] __schedule+0x785/0x12fa kernel: [ 120.765316] ? find_held_lock+0x3d/0xb2 kernel: [ 120.765331] schedule+0x7e/0xa1 kernel: [ 120.765340] schedule_preempt_disabled+0x15/0x1e kernel: [ 120.765349] __mutex_lock_common+0x561/0xc0d kernel: [ 120.765375] ? ieee80211_sta_work+0x3e/0x1232 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c] kernel: [ 120.765390] mutex_lock_nested+0x20/0x26 kernel: [ 120.765416] ieee80211_sta_work+0x3e/0x1232 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c] kernel: [ 120.765430] ? skb_dequeue+0x54/0x5e kernel: [ 120.765456] ? ieee80211_iface_work+0x7b/0x339 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c] kernel: [ 120.765485] process_one_work+0x270/0x504 kernel: [ 120.765501] worker_thread+0x215/0x376 kernel: [ 120.765514] kthread+0x159/0x168 kernel: [ 120.765526] ? pr_cont_work+0x5b/0x5b kernel: [ 120.765536] ? kthread_blkcg+0x31/0x31 kernel: [ 120.765550] ret_from_fork+0x22/0x30 ... kernel: [ 120.765867] Showing all locks held in the system: ... kernel: [ 120.766164] 5 locks held by wpa_supplicant/924: kernel: [ 120.766172] #0: ffffffffb1e63eb0 (cb_lock){++++}-{3:3}, at: genl_rcv+0x19/0x36 kernel: [ 120.766197] #1: ffffffffb1e5b1c8 (rtnl_mutex){+.+.}-{3:3}, at: nl80211_pre_doit+0x2a/0x15c [cfg80211] kernel: [ 120.766238] #2: ffff99f08347cd08 (&wdev->mtx){+.+.}-{3:3}, at: nl80211_deauthenticate+0xde/0x123 [cfg80211] kernel: [ 120.766279] #3: ffff99f09df12a48 (&local->mtx){+.+.}-{3:3}, at: ieee80211_destroy_auth_data+0x9b/0xe6 [mac80211] kernel: [ 120.766321] #4: ffff99f09df12ce0 (&local->chanctx_mtx){+.+.}-{3:3}, at: ieee80211_vif_release_channel+0x5e/0x81 [mac80211] ... kernel: [ 120.766585] 3 locks held by kworker/u32:26/4239: kernel: [ 120.766593] #0: ffff99f04458f948 ((wq_completion)phy0){+.+.}-{0:0}, at: process_one_work+0x19a/0x504 kernel: [ 120.766621] #1: ffffbad54b3cfe50 ((work_completion)(&sdata->work)){+.+.}-{0:0}, at: process_one_work+0x1c0/0x504 kernel: [ 120.766649] #2: ffff99f08347cd08 (&wdev->mtx){+.+.}-{3:3}, at: ieee80211_sta_work+0x3e/0x1232 [mac80211] With above info the issue is clear: First wmi_mgmt_tx_work is inserted to local->workqueue after sdata->work inserted, then wpa_supplicant acquires wdev->mtx in nl80211_deauthenticate and finally calls ath11k_mac_op_flush where it waits all mgmt. frames to be sent out by wmi_mgmt_tx_work. Meanwhile, sdata->work is blocked by wdev->mtx in ieee80211_sta_work, as a result wmi_mgmt_tx_work has no chance to run. Change to use ab->workqueue instead of local->workqueue to fix this issue. Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220217084545.18844-1-quic_bqiang@quicinc.com
2022-02-21ath11k: Handle failure in qmi firmware readySeevalamuthu Mariappan1-1/+5
In some scenarios like firmware crashes during init time and hardware gets restarted after qmi firmware ready event. During restart, ath11k_core_qmi_firmware_ready() returns timeout. But, this failure is not handled and ATH11K_FLAG_REGISTERED is set. When hardware restart completed, firmware sends firmware ready event again. Since ATH11K_FLAG_REGISTERED is already set, ath11k handles this as core restart. Inits are not done because of previous timeout. But ath11k_core_restart does deinit's which causes NULL pointer crash. Fix this by handling failure from ath11k_core_qmi_firmware_ready(). Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-00881-QCAHKSWPL_SILICONZ-1 Signed-off-by: Seevalamuthu Mariappan <quic_seevalam@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/1645079195-13564-1-git-send-email-quic_seevalam@quicinc.com
2022-02-21ath11k: Invalidate cached reo ring entry before accessing itRameshkumar Sundaram1-1/+1
REO2SW ring descriptor is currently allocated in cacheable memory. While reaping reo ring entries on second trial after updating head pointer, first entry is not invalidated before accessing it. This results in host reaping and using cached descriptor which is already overwritten in memory by DMA device (HW). Since the contents of descriptor(buffer id, peer info and other information bits) are outdated host throws errors like below while parsing corresponding MSDU's and drops them. [347712.048904] ath11k_pci 0004:01:00.0: msdu_done bit in attention is not set [349173.355503] ath11k_pci 0004:01:00.0: frame rx with invalid buf_id 962 Move the try_again: label above ath11k_hal_srng_access_begin() so that first entry will be invalidated and prefetched. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Fixes: 6452f0a3d565 ("ath11k: allocate dst ring descriptors from cacheable memory") Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/1645000354-32558-1-git-send-email-quic_ramess@quicinc.com
2022-02-21ath: Replace zero-length arrays with flexible-array membersGustavo A. R. Silva1-2/+2
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays Link: https://github.com/KSPP/linux/issues/78 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220216194915.GA904081@embeddedor
2022-02-21ath6kl: Replace zero-length arrays with flexible-array membersGustavo A. R. Silva1-13/+13
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays Link: https://github.com/KSPP/linux/issues/78 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220216194857.GA904059@embeddedor
2022-02-21ath11k: Replace zero-length arrays with flexible-array membersGustavo A. R. Silva5-11/+11
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays Link: https://github.com/KSPP/linux/issues/78 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220216194836.GA904035@embeddedor
2022-02-21ath10k: Replace zero-length array with flexible-array memberGustavo A. R. Silva1-1/+1
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays Link: https://github.com/KSPP/linux/issues/78 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220216194807.GA904008@embeddedor
2022-02-21ath9k: use hw_random API instead of directly dumping into random.cJason A. Donenfeld2-41/+32
Hardware random number generators are supposed to use the hw_random framework. This commit turns ath9k's kthread-based design into a proper hw_random driver. Cc: Toke Høiland-Jørgensen <toke@redhat.com> Cc: Kalle Valo <kvalo@kernel.org> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Tested-by: Rui Salvaterra <rsalvaterra@gmail.com> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220216113323.53332-1-Jason@zx2c4.com
2022-02-21drm/i915/reg: split out icl_dsi_regs.hJani Nikula4-333/+344
The ICL DSI registers have fairly isolated usage. Split the register macros to a separate file. Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220217224023.3994777-4-jani.nikula@intel.com
2022-02-21drm/i915/reg: split out vlv_dsi_regs.h and vlv_dsi_pll_regs.hJani Nikula8-575/+595
The VLV (including CHV, BXT, and GLK) DSI registers have fairly isolated usage. Split the register macros to separated files. Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220217224023.3994777-3-jani.nikula@intel.com
2022-02-21drm/i915/dsi: add separate init timer mask definition for ICL DSIJani Nikula2-1/+2
Having a separate definition will be useful for splitting VLV and ICL register files. Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220217224023.3994777-2-jani.nikula@intel.com
2022-02-21drm/i915/dsi: disassociate VBT video transfer mode from register valuesJani Nikula4-19/+39
The VBT DSI video transfer mode field values have been defined in terms of the VLV MIPI_VIDEO_MODE_FORMAT register. The ICL DSI code maps that to ICL DSI_TRANS_FUNC_CONF() register. The values are the same, though the shift is different. Make a clean break and disassociate the values from each other. Assume the values can be different, and translate the VBT value to VLV and ICL register values as needed. Use the existing macros from intel_bios.h. This will be useful in splitting the DSI register macros to files by DSI implementation. Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220217224023.3994777-1-jani.nikula@intel.com
2022-02-21ath11k: configure RDDM size to mhi for recovery by firmwareWen Gong1-0/+2
The rddm_size is needed by firmware while mhi enter RDDM state, add it to support recovery when ath11k receive MHI_CB_EE_RDDM message. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220209060012.32478-4-quic_wgong@quicinc.com
2022-02-21ath11k: fix invalid m3 buffer addressCarl Huang1-0/+1
This is to fix m3 buffer reuse issue as m3_mem->size isn't set to ZERO in free function, which leads invalid m3 downloading to firmware and firmware crashed. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2 Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220209060012.32478-3-quic_wgong@quicinc.com
2022-02-21ath11k: add ath11k_qmi_free_resource() for recoveryWen Gong2-0/+6
ath11k_qmi_free_target_mem_chunk() and ath11k_qmi_m3_free() is static in qmi.c, they are needed for recovery, export them in a new function. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220209060012.32478-2-quic_wgong@quicinc.com
2022-02-21drm/i915/dg2: Print PHY name properly on calibration errorMatt Roper1-1/+1
We need to use phy_name() to convert the PHY value into a human-readable character in the error message. Fixes: a6a128116e55 ("drm/i915/dg2: Wait for SNPS PHY calibration during display init") Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Swathi Dhanavanthri <swathi.dhanavanthri@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220215163545.2175730-1-matthew.d.roper@intel.com (cherry picked from commit 84073e568eec7b586b2f6fd5fb2fb08f59edec54) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2022-02-21drm/i915: Fix bw atomic check when switching between SAGV vs. no SAGVVille Syrjälä1-2/+16
If the only thing that is changing is SAGV vs. no SAGV but the number of active planes and the total data rates end up unchanged we currently bail out of intel_bw_atomic_check() early and forget to actually compute the new WGV point mask and thus won't actually enable/disable SAGV as requested. This ends up poorly if we end up running with SAGV enabled when we shouldn't. Usually ends up in underruns. To fix this let's go through the QGV point mask computation if either the data rates/number of planes, or the state of SAGV is changing. v2: Check more carefully if things are changing to avoid the extra calculations/debugs from introducing unwanted overhead Cc: stable@vger.kernel.org Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> #v1 Fixes: 20f505f22531 ("drm/i915: Restrict qgv points which don't have enough bandwidth.") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220218064039.12834-3-ville.syrjala@linux.intel.com (cherry picked from commit 6b728595ffa51c087343c716bccbfc260f120e72) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2022-02-21drm/i915: Correctly populate use_sagv_wm for all pipesVille Syrjälä1-11/+11
When changing between SAGV vs. no SAGV on tgl+ we have to update the use_sagv_wm flag for all the crtcs or else an active pipe not already in the state will end up using the wrong watermarks. That is especially bad when we end up with the tighter non-SAGV watermarks with SAGV enabled. Usually ends up in underruns. Cc: stable@vger.kernel.org Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Fixes: 7241c57d3140 ("drm/i915: Add TGL+ SAGV support") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220218064039.12834-2-ville.syrjala@linux.intel.com (cherry picked from commit 8dd8ffb824ca7b897ce9f2082ffa7e64831c22dc) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2022-02-21drm/i915: Disconnect PHYs left connected by BIOS on disabled portsImre Deak1-6/+20
BIOS may leave a TypeC PHY in a connected state even though the corresponding port is disabled. This will prevent any hotplug events from being signalled (after the monitor deasserts and then reasserts its HPD) until the PHY is disconnected and so the driver will not detect a connected sink. Rebooting with the PHY in the connected state also results in a system hang. Fix the above by disconnecting TypeC PHYs on disabled ports. Before commit 64851a32c463e5 the PHY connected state was read out even for disabled ports and later the PHY got disconnected as a side effect of a tc_port_lock/unlock() sequence (during connector probing), hence recovering the port's hotplug functionality. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5014 Fixes: 64851a32c463 ("drm/i915/tc: Add a mode for the TypeC PHY's disconnected state") Cc: <stable@vger.kernel.org> # v5.16+ Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220217152237.670220-1-imre.deak@intel.com (cherry picked from commit ed0ccf349ffd9c80e7376d4d8c608643de990e86) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2022-02-21drm/i915: Widen the QGV point maskVille Syrjälä1-4/+4
adlp+ adds some extra bits to the QGV point mask. The code attempts to handle that but forgot to actually make sure we can store those bits in the bw state. Fix it. Cc: stable@vger.kernel.org Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Fixes: 192fbfb76744 ("drm/i915: Implement PSF GV point support") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220214091811.13725-4-ville.syrjala@linux.intel.com Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> (cherry picked from commit c0299cc9840b3805205173cc77782f317b78ea0e) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2022-02-21USB: serial: option: add Telit LE910R1 compositionsDaniele Palmas1-0/+6
Add support for the following Telit LE910R1 compositions: 0x701a: rndis, tty, tty, tty 0x701b: ecm, tty, tty, tty 0x9201: tty Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Link: https://lore.kernel.org/r/20220218134552.4051-1-dnlplm@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2022-02-21USB: serial: option: add support for DW5829eSlark Xiao1-0/+6
Dell DW5829e same as DW5821e except CAT level. DW5821e supports CAT16 but DW5829e supports CAT9. There are 2 types product of DW5829e: normal and eSIM. So we will add 2 PID for DW5829e. And for each PID, it support MBIM or RMNET. Let's see test evidence as below: DW5829e MBIM mode: T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 2 P: Vendor=413c ProdID=81e6 Rev=03.18 S: Manufacturer=Dell Inc. S: Product=DW5829e Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 7 Cfg#= 2 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) DW5829e RMNET mode: T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 5 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=413c ProdID=81e6 Rev=03.18 S: Manufacturer=Dell Inc. S: Product=DW5829e Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option DW5829e-eSIM MBIM mode: T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 6 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 2 P: Vendor=413c ProdID=81e4 Rev=03.18 S: Manufacturer=Dell Inc. S: Product=DW5829e-eSIM Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 7 Cfg#= 2 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) DW5829e-eSIM RMNET mode: T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 7 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=413c ProdID=81e4 Rev=03.18 S: Manufacturer=Dell Inc. S: Product=DW5829e-eSIM Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option BTW, the interface 0x6 of MBIM mode is GNSS port, which not same as NMEA port. So it's banned from serial option driver. The remaining interfaces 0x2-0x5 are: MODEM, MODEM, NMEA, DIAG. Signed-off-by: Slark Xiao <slark_xiao@163.com> Link: https://lore.kernel.org/r/20220214021401.6264-1-slark_xiao@163.com [ johan: drop unnecessary reservation of interface 1 ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2022-02-21fsi: Add trace events in initialization pathEddie James2-3/+10
Add definitions for trace events to show the scanning flow. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Link: https://lore.kernel.org/r/20220207161640.35605-1-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-02-21fsi: sbefifo: Implement FSI_SBEFIFO_READ_TIMEOUT_SECONDS ioctlAmitay Isaacs1-0/+49
FSI_SBEFIFO_READ_TIMEOUT_SECONDS ioctl sets the read timeout (in seconds) for the response received by sbefifo device from sbe. The timeout affects only the read operation on current sbefifo device fd. Certain SBE operations can take long time to complete and the default timeout of 10 seconds might not be sufficient to start receiving response from SBE. In such cases, allow the timeout to be set to the maximum of 120 seconds. The kernel does not contain the definition of the various SBE operations, so we must expose an interface to userspace to set the timeout for the given operation. Signed-off-by: Amitay Isaacs <amitay@ozlabs.org> Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20220121053816.82253-3-joel@jms.id.au Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-02-21fsi: sbefifo: Use specified value of start of response timeoutAmitay Isaacs1-1/+3
For some of the chip-ops where sbe needs to collect trace information, sbe can take a long time (>30s) to respond. Currently these chip-ops will timeout as the start of response timeout defaults to 10s. Instead of default value, use specified value. The require timeout value will be set using ioctl. Signed-off-by: Amitay Isaacs <amitay@ozlabs.org> Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20220121053816.82253-2-joel@jms.id.au Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-02-21fsi: occ: Improve response status checkingEddie James1-30/+55
If the driver sequence number coincidentally equals the previous command response sequence number, the driver may proceed with fetching the entire buffer before the OCC has processed the current command. To be sure the correct response is obtained, check the command type and also retry if any of the response parameters have changed when the rest of the buffer is fetched. Also initialize the driver with a random sequence number in order to reduce the chances of this happening. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20220208152235.19686-1-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-02-21rtw89: core.h: Replace zero-length array with flexible-array memberGustavo A. R. Silva1-1/+1
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays Link: https://github.com/KSPP/linux/issues/78 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220216195047.GA904198@embeddedor
2022-02-21brcmfmac: Replace zero-length arrays with flexible-array membersGustavo A. R. Silva2-2/+2
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays Link: https://github.com/KSPP/linux/issues/78 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220216194935.GA904103@embeddedor
2022-02-21Revert "USB: serial: ch341: add new Product ID for CH341A"Dmytro Bagrii1-1/+0
This reverts commit 46ee4abb10a07bd8f8ce910ee6b4ae6a947d7f63. CH341 has Product ID 0x5512 in EPP/MEM mode which is used for I2C/SPI/GPIO interfaces. In asynchronous serial interface mode CH341 has PID 0x5523 which is already in the table. Mode is selected by corresponding jumper setting. Signed-off-by: Dmytro Bagrii <dimich.dmb@gmail.com> Link: https://lore.kernel.org/r/20220210164137.4376-1-dimich.dmb@gmail.com Link: https://lore.kernel.org/r/YJ0OCS/sh+1ifD/q@hovoldconsulting.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2022-02-21bcma: cleanup commentsTom Rix5-11/+11
Remove the second 'info'. Replacements 'adventages' with 'advantages' 'strenth' with 'strength' 'atleast' with 'at least' 'thr'u'' with 'through' 'capabilty' with 'capability' 'controll' with 'control' 'ourself' with 'ourselves' 'noone' with 'no one' 'cores' to 'core's' and 'core' Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220213213121.2806376-1-trix@redhat.com
2022-02-21rtw89: fix RCU usage in rtw89_core_txq_push()Jiri Kosina1-1/+4
ieee80211_tx_h_select_key() is performing a series of RCU dereferences, but rtw89_core_txq_push() is calling it (via ieee80211_tx_dequeue_ni()) without RCU read-side lock held; fix that. This addresses the splat below. ============================= WARNING: suspicious RCU usage 5.17.0-rc4-00003-gccad664b7f14 #3 Tainted: G E ----------------------------- net/mac80211/tx.c:593 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 2 locks held by kworker/u33:0/184: #0: ffff9c0b14811d38 ((wq_completion)rtw89_tx_wq){+.+.}-{0:0}, at: process_one_work+0x258/0x660 #1: ffffb97380cf3e78 ((work_completion)(&rtwdev->txq_work)){+.+.}-{0:0}, at: process_one_work+0x258/0x660 stack backtrace: CPU: 8 PID: 184 Comm: kworker/u33:0 Tainted: G E 5.17.0-rc4-00003-gccad664b7f14 #3 473b49ab0e7c2d6af2900c756bfd04efd7a9de13 Hardware name: LENOVO 20UJS2B905/20UJS2B905, BIOS R1CET63W(1.32 ) 04/09/2021 Workqueue: rtw89_tx_wq rtw89_core_txq_work [rtw89_core] Call Trace: <TASK> dump_stack_lvl+0x58/0x71 ieee80211_tx_h_select_key+0x2c0/0x530 [mac80211 911c23e2351c0ae60b597a67b1204a5ea955e365] ieee80211_tx_dequeue+0x1a7/0x1260 [mac80211 911c23e2351c0ae60b597a67b1204a5ea955e365] rtw89_core_txq_work+0x1a6/0x420 [rtw89_core b39ba493f2e517ad75e0f8187ecc24edf58bbbea] process_one_work+0x2d8/0x660 worker_thread+0x39/0x3e0 ? process_one_work+0x660/0x660 kthread+0xe5/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 </TASK> ============================= WARNING: suspicious RCU usage 5.17.0-rc4-00003-gccad664b7f14 #3 Tainted: G E ----------------------------- net/mac80211/tx.c:607 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 2 locks held by kworker/u33:0/184: #0: ffff9c0b14811d38 ((wq_completion)rtw89_tx_wq){+.+.}-{0:0}, at: process_one_work+0x258/0x660 #1: ffffb97380cf3e78 ((work_completion)(&rtwdev->txq_work)){+.+.}-{0:0}, at: process_one_work+0x258/0x660 stack backtrace: CPU: 8 PID: 184 Comm: kworker/u33:0 Tainted: G E 5.17.0-rc4-00003-gccad664b7f14 #3 473b49ab0e7c2d6af2900c756bfd04efd7a9de13 Hardware name: LENOVO 20UJS2B905/20UJS2B905, BIOS R1CET63W(1.32 ) 04/09/2021 Workqueue: rtw89_tx_wq rtw89_core_txq_work [rtw89_core] Call Trace: <TASK> dump_stack_lvl+0x58/0x71 ieee80211_tx_h_select_key+0x464/0x530 [mac80211 911c23e2351c0ae60b597a67b1204a5ea955e365] ieee80211_tx_dequeue+0x1a7/0x1260 [mac80211 911c23e2351c0ae60b597a67b1204a5ea955e365] rtw89_core_txq_work+0x1a6/0x420 [rtw89_core b39ba493f2e517ad75e0f8187ecc24edf58bbbea] process_one_work+0x2d8/0x660 worker_thread+0x39/0x3e0 ? process_one_work+0x660/0x660 kthread+0xe5/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 </TASK> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/nycvar.YFH.7.76.2202152037000.11721@cbobk.fhfr.pm
2022-02-21drm/vc4: Use drm_mode_copy()Ville Syrjälä1-3/+2
struct drm_display_mode embeds a list head, so overwriting the full struct with another one will corrupt the list (if the destination mode is on a list). Use drm_mode_copy() instead which explicitly preserves the list head of the destination mode. Even if we know the destination mode is not on any list using drm_mode_copy() seems decent as it sets a good example. Bad examples of not using it might eventually get copied into code where preserving the list head actually matters. Obviously one case not covered here is when the mode itself is embedded in a larger structure and the whole structure is copied. But if we are careful when copying into modes embedded in structures I think we can be a little more reassured that bogus list heads haven't been propagated in. @is_mode_copy@ @@ drm_mode_copy(...) { ... } @depends on !is_mode_copy@ struct drm_display_mode *mode; expression E, S; @@ ( - *mode = E + drm_mode_copy(mode, &E) | - memcpy(mode, E, S) + drm_mode_copy(mode, E) ) @depends on !is_mode_copy@ struct drm_display_mode mode; expression E; @@ ( - mode = E + drm_mode_copy(&mode, &E) | - memcpy(&mode, E, S) + drm_mode_copy(&mode, E) ) @@ struct drm_display_mode *mode; @@ - &*mode + mode Cc: Emma Anholt <emma@anholt.net> Cc: Maxime Ripard <mripard@kernel.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220218100403.7028-18-ville.syrjala@linux.intel.com
2022-02-21rtw88: coex: Update rtl8822c COEX version to 22020720Ching-Te Ku1-2/+2
Enable Wi-Fi/BT mailbox 0x45 handshake and Wi-Fi MIMO power save mechanism for Bluetooth gaming controller. BTCOEX Version: 22020720-2020 Desired_BT_Coex_Ver: 0x20 Desired_WL_FW_Ver: 9.9.11 Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220215004855.4098-7-pkshih@realtek.com
2022-02-21rtw88: coex: Add C2H/H2C handshake with BT mailbox for asking HID InfoChing-Te Ku6-11/+206
In order to recognize the gaming controller HID, make a C2H/H2C/Mailbox handshake to collect all the connected information from BT. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220215004855.4098-6-pkshih@realtek.com
2022-02-21rtw88: coex: Add WLAN MIMO power saving for Bluetooth gaming controllerChing-Te Ku7-11/+148
To keep high sensitivity reaction, Bluetooth gaming controller will send packet very frequently, it will make WLAN performance very poor. To solve this situation, MIMO PS mechanism makes WLAN/BT own an antenna itself, WLAN quits 2SS performance but it can get a stable 1SS performance and Bluetooth gaming controller can keep sensitivity reaction at the same time. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220215004855.4098-5-pkshih@realtek.com
2022-02-21rtw88: coex: update BT PTA counter regularlyChing-Te Ku3-12/+37
If BT PTA counter can not update regularly, it will lead coex mechanism run into some unexpected state. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220215004855.4098-4-pkshih@realtek.com
2022-02-21rtw88: coex: Improve WLAN throughput when HFP COEXChing-Te Ku1-7/+2
Disable power save TDMA mechanism under HFP COEX, so WLAN can TX/RX full time. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220215004855.4098-3-pkshih@realtek.com
2022-02-21rtw88: 8822ce: add support for TX/RX 1ss modeChin-Yen Lee5-4/+41
In some case, wifi chip need to be configed to be TX/RX 1ss mode. For this mode, wifi components, such as MAC/BB/RF, need to be specially set, and driver need to send SMPS action frame to inform AP. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220215004855.4098-2-pkshih@realtek.com
2022-02-21HID: hid-thrustmaster: fix OOB read in thrustmaster_interruptsPavel Skripkin1-0/+6
Syzbot reported an slab-out-of-bounds Read in thrustmaster_probe() bug. The root case is in missing validation check of actual number of endpoints. Code should not blindly access usb_host_interface::endpoint array, since it may contain less endpoints than code expects. Fix it by adding missing validaion check and print an error if number of endpoints do not match expected number Fixes: c49c33637802 ("HID: support for initialization of some Thrustmaster wheels") Reported-and-tested-by: syzbot+35eebd505e97d315d01c@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-02-21soc: imx: gpcv2: Fix clock disabling imbalance in error pathLaurent Pinchart1-1/+2
The imx_pgc_power_down() starts by enabling the domain clocks, and thus disables them in the error path. Commit 18c98573a4cf ("soc: imx: gpcv2: add domain option to keep domain clocks enabled") made the clock enable conditional, but forgot to add the same condition to the error path. This can result in a clock enable/disable imbalance. Fix it. Fixes: 18c98573a4cf ("soc: imx: gpcv2: add domain option to keep domain clocks enabled") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-02-21PCI: vmd: Prevent recursive locking on interrupt allocationThomas Gleixner1-7/+7
Tejas reported the following recursive locking issue: swapper/0/1 is trying to acquire lock: ffff8881074fd0a0 (&md->mutex){+.+.}-{3:3}, at: msi_get_virq+0x30/0xc0 but task is already holding lock: ffff8881017cd6a0 (&md->mutex){+.+.}-{3:3}, at: __pci_enable_msi_range+0xf2/0x290 stack backtrace: __mutex_lock+0x9d/0x920 msi_get_virq+0x30/0xc0 pci_irq_vector+0x26/0x30 vmd_msi_init+0xcc/0x210 msi_domain_alloc+0xbf/0x150 msi_domain_alloc_irqs_descs_locked+0x3e/0xb0 __pci_enable_msi_range+0x155/0x290 pci_alloc_irq_vectors_affinity+0xba/0x100 pcie_port_device_register+0x307/0x550 pcie_portdrv_probe+0x3c/0xd0 pci_device_probe+0x95/0x110 This is caused by the VMD MSI code which does a lookup of the Linux interrupt number for an VMD managed MSI[X] vector. The lookup function tries to acquire the already held mutex. Avoid that by caching the Linux interrupt number at initialization time instead of looking it up over and over. Fixes: 82ff8e6b78fc ("PCI/MSI: Use msi_get_virq() in pci_get_vector()") Reported-by: "Surendrakumar Upadhyay, TejaskumarX" <tejaskumarx.surendrakumar.upadhyay@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: "Surendrakumar Upadhyay, TejaskumarX" <tejaskumarx.surendrakumar.upadhyay@intel.com> Cc: linux-pci@vger.kernel.org Link: https://lore.kernel.org/r/87a6euub2a.ffs@tglx
2022-02-21drm/panel: nt35560: Support also ACX424AKMLinus Walleij1-3/+69
Add some code and config to also support the ACX424AKM used in some Sony (Ericsson) Mobile phones. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220103113822.654592-3-linus.walleij@linaro.org
2022-02-21drm/panel: nt35560: Support more panel IDsLinus Walleij1-3/+5
These IDs were found in the wild in a Sony Xperia vendor tree. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220103113822.654592-2-linus.walleij@linaro.org
2022-02-21drm/panel: Rename Sony ACX424 to Novatek NT35560Linus Walleij3-118/+122
A code drop from Sony Mobile reveals that the ACX424 panels are built around the Novatek NT35560 panel controllers so just bite the bullet and rename the driver and all basic symbols so that we can modify this driver to cover any other panels also using the Novatek NT35560 display controller. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220103113822.654592-1-linus.walleij@linaro.org
2022-02-20Merge tag 'edac_urgent_for_v5.17_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/rasLinus Torvalds1-1/+1
Pull EDAC fix from Borislav Petkov: "Fix a long-standing struct alignment bug in the EDAC struct allocation code" * tag 'edac_urgent_for_v5.17_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC: Fix calculation of returned address and next offset in edac_align_ptr()
2022-02-20Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds6-8/+29
Pull SCSI fixes from James Bottomley: "Three fixes, all in drivers. The ufs and qedi fixes are minor; the lpfc one is a bit bigger because it involves adding a heuristic to detect and deal with common but not standards compliant behaviour" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: core: Fix divide by zero in ufshcd_map_queues() scsi: lpfc: Fix pt2pt NVMe PRLI reject LOGO loop scsi: qedi: Fix ABBA deadlock in qedi_process_tmf_resp() and qedi_process_cmd_cleanup_resp()
2022-02-20Merge tag 'dmaengine-fix-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengineLinus Torvalds5-13/+25
Pull dmaengine fixes from Vinod Koul: "A bunch of driver fixes for: - ptdma error handling in init - lock fix in at_hdmac - error path and error num fix for sh dma - pm balance fix for stm32" * tag 'dmaengine-fix-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: dmaengine: shdma: Fix runtime PM imbalance on error dmaengine: sh: rcar-dmac: Check for error num after dma_set_max_seg_size dmaengine: stm32-dmamux: Fix PM disable depth imbalance in stm32_dmamux_probe dmaengine: sh: rcar-dmac: Check for error num after setting mask dmaengine: at_xdmac: Fix missing unlock in at_xdmac_tasklet() dmaengine: ptdma: Fix the error handling path in pt_core_init()
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.