aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2022-02-10clk: qcom: gcc-msm8996: start getting rid of xo clkDmitry Baryshkov1-11/+11
The "xo" fixed_factor clock is a leftover/hack from a time when we couldn't make rpmhcc the root of all clocks. It is going to be removed once all users of this clock are converted to use clocks specified through the DTS. Replace internal usage of the xo clock with the cxo (RPM_SMD_BB_CLK1) parent, specifying xo_board as a fallback. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211228045415.20543-17-dmitry.baryshkov@linaro.org
2022-02-10clk: qcom: gcc-msm8996: use parent_hws/_data instead of parent_namesDmitry Baryshkov1-215/+463
Convert the clock driver to specify parent data rather than parent names, to actually bind using 'clock-names' specified in the DTS rather than global clock names. Use parent_hws where possible to refer parent clocks directly, skipping the lookup. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211228045415.20543-16-dmitry.baryshkov@linaro.org
2022-02-10clk: qcom: gcc-msm8996: move clock parent tables downDmitry Baryshkov1-92/+92
Move clock parent tables down, after the GPLL declrataions, so that we can use gpll hw clock fields in the next commit. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211228045415.20543-15-dmitry.baryshkov@linaro.org
2022-02-10clk: qcom: gcc-msm8996: drop unsupported clock sourcesDmitry Baryshkov1-49/+6
In preparation of updating the msm8996 gcc driver, drop all unsupported GPLL sources (gpll1/gpll1_early_div, gpll2/gpll2_early and gpll3). Downstream kernel also does not provide support for these GPLL sources, so it is safe to drop them. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211228045415.20543-14-dmitry.baryshkov@linaro.org
2022-02-10clk: qcom: gcc-msm8996: use ARRAY_SIZE instead of specifying num_parentsDmitry Baryshkov1-61/+61
Use ARRAY_SIZE() instead of manually specifying num_parents. This makes adding/removing entries to/from parent_data easy and errorproof. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211228045415.20543-13-dmitry.baryshkov@linaro.org
2022-02-10clk: qcom: videocc-sc7180: use parent_hws instead of parent_dataDmitry Baryshkov1-4/+4
If all parents are specified as clk_hw, we can use parent_hws instead of parent_data. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211228045415.20543-12-dmitry.baryshkov@linaro.org
2022-02-10clk: qcom: camcc-sdm845: convert to parent_hws/_dataDmitry Baryshkov1-142/+158
Convert the clock driver to specify parent hws/data rather than parent names, to actually bind using 'clock-names' specified in the DTS rather than global clock names. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211228045415.20543-11-dmitry.baryshkov@linaro.org
2022-02-10clk: qcom: camcc-sdm845: move clock parent tables downDmitry Baryshkov1-16/+16
Move clock parent tables down, after the PLL declrataions, so that we can use pll hw clock fields in the next commit. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211228045415.20543-10-dmitry.baryshkov@linaro.org
2022-02-10clk: qcom: camcc-sdm845: get rid of the test clockDmitry Baryshkov1-3/+0
The test clock isn't in the bindings and apparently it's not used by anyone upstream. Remove it. Suggested-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211228045415.20543-9-dmitry.baryshkov@linaro.org
2022-02-10clk: qcom: camcc-sdm845: use ARRAY_SIZE instead of specifying num_parentsDmitry Baryshkov1-25/+25
Use ARRAY_SIZE() instead of manually specifying num_parents. This makes adding/removing entries to/from parent_data easy and errorproof. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211228045415.20543-8-dmitry.baryshkov@linaro.org
2022-02-10clk: qcom: camcc-sc7180: use parent_hws instead of parent_dataDmitry Baryshkov1-77/+79
If all parents are specified as clk_hw, we can use parent_hws instead of parent_data. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211228045415.20543-7-dmitry.baryshkov@linaro.org
2022-02-10clk: qcom: camcc-sc7180: get rid of the test clockDmitry Baryshkov1-15/+0
The test clock isn't in the bindings and apparently it's not used by anyone upstream. Remove it. Suggested-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211228045415.20543-6-dmitry.baryshkov@linaro.org
2022-02-10clk: qcom: camcc-sc7180: use ARRAY_SIZE instead of specifying num_parentsDmitry Baryshkov1-25/+25
Use ARRAY_SIZE() instead of manually specifying num_parents. This makes adding/removing entries to/from parent_data easy and errorproof. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211228045415.20543-5-dmitry.baryshkov@linaro.org
2022-02-10clk: qcom: gpucc-sdm660: use parent_hws instead of parent_dataDmitry Baryshkov1-6/+6
If all parents are specified as clk_hw, we can use parent_hws instead of parent_data. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211228045415.20543-4-dmitry.baryshkov@linaro.org
2022-02-10clk: qcom: gpucc-sdm660: get rid of the test clockDmitry Baryshkov1-1/+0
The test clock isn't in the bindings and apparently it's not used by anyone upstream. Remove it. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211228045415.20543-3-dmitry.baryshkov@linaro.org
2022-02-10clk: qcom: gpucc-sdm660: fix two clocks with parent_namesDmitry Baryshkov1-4/+4
Two clocks are still using parent_names, use parent_hws instead. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211228045415.20543-2-dmitry.baryshkov@linaro.org
2022-02-10soc: qcom: llcc: Add configuration data for SM8450 SoCSai Prakash Ranjan1-0/+34
Add LLCC configuration data for SM8450 SoC. Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Tested-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/fec944cb8f2a4a70785903c6bfec629c6f31b6a4.1643355594.git.quic_saipraka@quicinc.com
2022-02-10soc: qcom: llcc: Update register offsets for newer LLCC HWSai Prakash Ranjan1-7/+29
Newer LLCC HW have different register offsets for several registers, currently of which LLCC hardware info and status are used to identify the LLCC version information and other data. So use separate table to keep track of these register offsets which vary by different LLCC HW versions and eases any future addition in variations of register offsets for newer hardware. Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Tested-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/c655d16d945aef2d7fc8e7c212f3e1c58a84eb95.1643355594.git.quic_saipraka@quicinc.com
2022-02-10soc: qcom: llcc: Add missing llcc configuration dataSai Prakash Ranjan1-0/+4
Add missing llcc configuration data for few chipsets which were not added during initial post. Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Tested-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/143d11bacaca086406fdd10fc32f91eccd943527.1643355594.git.quic_saipraka@quicinc.com
2022-02-10soc: qcom: llcc: Add write-cache cacheable supportSai Prakash Ranjan1-0/+15
Newer SoCs with LLCC IP version 2.1.0.0 and later support write sub-cache cacheable feature. Use a separate llcc_slice_config member "write_scid_cacheable_en" to identify this feature and program LLCC_TRP_SCID_WRSC_CACHEABLE_EN register to enable it. Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Tested-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/83372c8178f579d055ec58212ce5af5d55abadd4.1643355594.git.quic_saipraka@quicinc.com
2022-02-10soc: qcom: llcc: Update the logic for version info extractionSai Prakash Ranjan1-4/+5
LLCC HW version info is made up of major, branch, minor and echo version bits each of which are 8bits. Several features in newer LLCC HW are based on the full version rather than just major or minor versions such as write-subcache enable which is applicable for versions v2.0.0.0 and later, also upcoming write-subcache cacheable for SM8450 SoC which is only present in versions v2.1.0.0 and later, so it makes it easier and cleaner to just directly compare with the full version than adding additional major/branch/ minor/echo version checks. So remove the earlier major version check and add full version check for those features. Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Tested-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/a82d7c32348c51fcc2b63e220d91b318bf706c83.1643355594.git.quic_saipraka@quicinc.com
2022-02-10soc: qcom: llcc: Add support for 16 ways of allocationHuang Yiwei1-2/+2
Add support for 16 ways of allocation for LLCC HW version 2.1.0 and later. Signed-off-by: Huang Yiwei <hyiwei@codeaurora.org> Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Tested-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/a7a5f64259c2c02628f03fb59b91e9fa78da2dfb.1643355594.git.quic_saipraka@quicinc.com
2022-02-11pinctrl: qcom: spmi-mpp: Add PM8226 compatibleRayyan Ansari1-0/+1
The PM8226 provides 8 MPPs. Add a compatible to support them. Signed-off-by: Rayyan Ansari <rayyan@ansari.sh> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220124171538.18088-2-rayyan@ansari.sh Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-02-10Merge tag 'net-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds27-69/+157
Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter and can. Current release - new code bugs: - sparx5: fix get_stat64 out-of-bound access and crash - smc: fix netdev ref tracker misuse Previous releases - regressions: - eth: ixgbevf: require large buffers for build_skb on 82599VF, avoid overflows - eth: ocelot: fix all IP traffic getting trapped to CPU with PTP over IP - bonding: fix rare link activation misses in 802.3ad mode Previous releases - always broken: - tcp: fix tcp sock mem accounting in zero-copy corner cases - remove the cached dst when uncloning an skb dst and its metadata, since we only have one ref it'd lead to an UaF - netfilter: - conntrack: don't refresh sctp entries in closed state - conntrack: re-init state for retransmitted syn-ack, avoid connection establishment getting stuck with strange stacks - ctnetlink: disable helper autoassign, avoid it getting lost - nft_payload: don't allow transport header access for fragments - dsa: fix use of devres for mdio throughout drivers - eth: amd-xgbe: disable interrupts during pci removal - eth: dpaa2-eth: unregister netdev before disconnecting the PHY - eth: ice: fix IPIP and SIT TSO offload" * tag 'net-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits) net: dsa: mv88e6xxx: fix use-after-free in mv88e6xxx_mdios_unregister net: mscc: ocelot: fix mutex lock error during ethtool stats read ice: Avoid RTNL lock when re-creating auxiliary device ice: Fix KASAN error in LAG NETDEV_UNREGISTER handler ice: fix IPIP and SIT TSO offload ice: fix an error code in ice_cfg_phy_fec() net: mpls: Fix GCC 12 warning dpaa2-eth: unregister the netdev before disconnecting from the PHY skbuff: cleanup double word in comment net: macb: Align the dma and coherent dma masks mptcp: netlink: process IPv6 addrs in creating listening sockets selftests: mptcp: add missing join check net: usb: qmi_wwan: Add support for Dell DW5829e vlan: move dev_put into vlan_dev_uninit vlan: introduce vlan_dev_free_egress_priority ax25: fix UAF bugs of net_device caused by rebinding operation net: dsa: fix panic when DSA master device unbinds on shutdown net: amd-xgbe: disable interrupts during pci removal tipc: rate limit warning for received illegal binding update net: mdio: aspeed: Add missing MODULE_DEVICE_TABLE ...
2022-02-10clk: qcom: Add display clock controller driver for QCM2290Loic Poulain3-0/+565
Add support for the display clock controller found in QCM2290 based devices. This clock controller feeds the Multimedia Display SubSystem (MDSS). It's a porting of dispcc-scuba GPL-2.0 driver from CAF msm-4.19 kernel: https://source.codeaurora.org/quic/la/kernel/msm-4.19/tree/drivers/clk/qcom/dispcc-scuba.c?h=LE.UM.4.4.1.r3 Global clock name references (parent_names) have been replaced by parent_data and parent_hws. Clocks marked enable_safe_config have their clk_rcg2_ops moved to clk_rcg2_shared_ops. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1644432308-21099-2-git-send-email-loic.poulain@linaro.org
2022-02-10clk: qcom: ipq8074: fix PCI-E clock oopsRobert Marko1-10/+9
Fix PCI-E clock related kernel oops that are caused by a missing clock parent. pcie0_rchng_clk_src has num_parents set to 2 but only one parent is actually set via parent_hws, it should also have "XO" defined. This will cause the kernel to panic on a NULL pointer in clk_core_get_parent_by_index(). So, to fix this utilize clk_parent_data to provide gcc_xo_gpll0 parent data. Since there is already an existing static const char * const gcc_xo_gpll0[] used to provide the same parents via parent_names convert those users to clk_parent_data as well. Without this earlycon is needed to even catch the OOPS as it will reset the board before serial is initialized with the following: [ 0.232279] Unable to handle kernel paging request at virtual address 0000a00000000000 [ 0.232322] Mem abort info: [ 0.239094] ESR = 0x96000004 [ 0.241778] EC = 0x25: DABT (current EL), IL = 32 bits [ 0.244908] SET = 0, FnV = 0 [ 0.250377] EA = 0, S1PTW = 0 [ 0.253236] FSC = 0x04: level 0 translation fault [ 0.256277] Data abort info: [ 0.261141] ISV = 0, ISS = 0x00000004 [ 0.264262] CM = 0, WnR = 0 [ 0.267820] [0000a00000000000] address between user and kernel address ranges [ 0.270954] Internal error: Oops: 96000004 [#1] SMP [ 0.278067] Modules linked in: [ 0.282751] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.15.10 #0 [ 0.285882] Hardware name: Xiaomi AX3600 (DT) [ 0.292043] pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 0.296299] pc : clk_core_get_parent_by_index+0x68/0xec [ 0.303067] lr : __clk_register+0x1d8/0x820 [ 0.308273] sp : ffffffc01111b7d0 [ 0.312438] x29: ffffffc01111b7d0 x28: 0000000000000000 x27: 0000000000000040 [ 0.315919] x26: 0000000000000002 x25: 0000000000000000 x24: ffffff8000308800 [ 0.323037] x23: ffffff8000308850 x22: ffffff8000308880 x21: ffffff8000308828 [ 0.330155] x20: 0000000000000028 x19: ffffff8000309700 x18: 0000000000000020 [ 0.337272] x17: 000000005cc86990 x16: 0000000000000004 x15: ffffff80001d9d0a [ 0.344391] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000006 [ 0.351508] x11: 0000000000000003 x10: 0101010101010101 x9 : 0000000000000000 [ 0.358626] x8 : 7f7f7f7f7f7f7f7f x7 : 6468626f5e626266 x6 : 17000a3a403c1b06 [ 0.365744] x5 : 061b3c403a0a0017 x4 : 0000000000000000 x3 : 0000000000000001 [ 0.372863] x2 : 0000a00000000000 x1 : 0000000000000001 x0 : ffffff8000309700 [ 0.379982] Call trace: [ 0.387091] clk_core_get_parent_by_index+0x68/0xec [ 0.389351] __clk_register+0x1d8/0x820 [ 0.394210] devm_clk_hw_register+0x5c/0xe0 [ 0.398030] devm_clk_register_regmap+0x44/0x8c [ 0.402198] qcom_cc_really_probe+0x17c/0x1d0 [ 0.406711] qcom_cc_probe+0x34/0x44 [ 0.411224] gcc_ipq8074_probe+0x18/0x30 [ 0.414869] platform_probe+0x68/0xe0 [ 0.418776] really_probe.part.0+0x9c/0x30c [ 0.422336] __driver_probe_device+0x98/0x144 [ 0.426329] driver_probe_device+0x44/0x11c [ 0.430842] __device_attach_driver+0xb4/0x120 [ 0.434836] bus_for_each_drv+0x68/0xb0 [ 0.439349] __device_attach+0xb0/0x170 [ 0.443081] device_initial_probe+0x14/0x20 [ 0.446901] bus_probe_device+0x9c/0xa4 [ 0.451067] device_add+0x35c/0x834 [ 0.454886] of_device_add+0x54/0x64 [ 0.458360] of_platform_device_create_pdata+0xc0/0x100 [ 0.462181] of_platform_bus_create+0x114/0x370 [ 0.467128] of_platform_bus_create+0x15c/0x370 [ 0.471641] of_platform_populate+0x50/0xcc [ 0.476155] of_platform_default_populate_init+0xa8/0xc8 [ 0.480324] do_one_initcall+0x50/0x1b0 [ 0.485877] kernel_init_freeable+0x234/0x29c [ 0.489436] kernel_init+0x24/0x120 [ 0.493948] ret_from_fork+0x10/0x20 [ 0.497253] Code: d50323bf d65f03c0 f94002a2 b4000302 (f9400042) [ 0.501079] ---[ end trace 4ca7e1129da2abce ]--- Fixes: f0cfcf1a ("clk: qcom: ipq8074: Add missing clocks for pcie") Signed-off-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211220114119.465247-1-robimarko@gmail.com
2022-02-10soc: qcom: socinfo: Add some more PMICs and SoCsBjorn Andersson1-0/+12
Add SM8350, SC8280XP, SA8540P and one more SM8450 and various PMICs found on boards on these platforms to the socinfo driver. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20220210051043.748275-1-bjorn.andersson@linaro.org
2022-02-10PCI: pciehp: Add Qualcomm quirk for Command Completed erratumManivannan Sadhasivam1-0/+2
The Qualcomm PCI bridge device (Device ID 0x0110) found in chipsets such as SM8450 does not set the Command Completed bit unless writes to the Slot Command register change "Control" bits. This results in timeouts like below: pcieport 0001:00:00.0: pciehp: Timeout on hotplug command 0x03c0 (issued 2020 msec ago) Add the device to the Command Completed quirk to mark commands "completed" immediately unless they change the "Control" bits. Link: https://lore.kernel.org/r/20220210145003.135907-1-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-02-10i2c: piix4: Replace hardcoded memory map size with a #defineTerry Bowman1-6/+10
Replace number constant with #define to improve readability and maintainability. Signed-off-by: Terry Bowman <terry.bowman@amd.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-02-10thermal: intel: hfi: INTEL_HFI_THERMAL depends on NETRandy Dunlap1-0/+1
THERMAL_NETLINK depends on NET and since 'select' does not follow any dependency chain, INTEL_HFI_THERMAL also should depend on NET. Fix one Kconfig warning and 48 subsequent build errors: WARNING: unmet direct dependencies detected for THERMAL_NETLINK Depends on [n]: THERMAL [=y] && NET [=n] Selected by [y]: - INTEL_HFI_THERMAL [=y] && THERMAL [=y] && (X86 [=y] || X86_INTEL_QUARK [=n] || COMPILE_TEST [=y]) && CPU_SUP_INTEL [=y] && X86_THERMAL_VECTOR [=y] Fixes: bd30cdfd9bd7 ("thermal: intel: hfi: Notify user space for HFI events") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-02-10net: dsa: mv88e6xxx: fix use-after-free in mv88e6xxx_mdios_unregisterVladimir Oltean1-2/+2
Since struct mv88e6xxx_mdio_bus *mdio_bus is the bus->priv of something allocated with mdiobus_alloc_size(), this means that mdiobus_free(bus) will free the memory backing the mdio_bus as well. Therefore, the mdio_bus->list element is freed memory, but we continue to iterate through the list of MDIO buses using that list element. To fix this, use the proper list iterator that handles element deletion by keeping a copy of the list element next pointer. Fixes: f53a2ce893b2 ("net: dsa: mv88e6xxx: don't use devres for mdiobus") Reported-by: Rafael Richter <rafael.richter@gin.de> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20220210174017.3271099-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-10Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski5-16/+53
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-02-10 Dan Carpenter propagates an error in FEC configuration. Jesse fixes TSO offloads of IPIP and SIT frames. Dave adds a dedicated LAG unregister function to resolve a KASAN error and moves auxiliary device re-creation after LAG removal to the service task to avoid issues with RTNL lock. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: Avoid RTNL lock when re-creating auxiliary device ice: Fix KASAN error in LAG NETDEV_UNREGISTER handler ice: fix IPIP and SIT TSO offload ice: fix an error code in ice_cfg_phy_fec() ==================== Link: https://lore.kernel.org/r/20220210170515.2609656-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-10net: mscc: ocelot: fix mutex lock error during ethtool stats readColin Foster1-4/+7
An ongoing workqueue populates the stats buffer. At the same time, a user might query the statistics. While writing to the buffer is mutex-locked, reading from the buffer wasn't. This could lead to buggy reads by ethtool. This patch fixes the former blamed commit, but the bug was introduced in the latter. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Fixes: 1e1caa9735f90 ("ocelot: Clean up stats update deferred work") Fixes: a556c76adc052 ("net: mscc: Add initial Ocelot switch support") Reported-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/all/20220210150451.416845-2-colin.foster@in-advantage.com/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-10net: dsa: qca8k: fix noderef.cocci warningskernel test robot1-1/+1
drivers/net/dsa/qca8k.c:422:37-43: ERROR: application of sizeof to pointer sizeof when applied to a pointer typed expression gives the size of the pointer Generated by: scripts/coccinelle/misc/noderef.cocci Fixes: 90386223f44e ("net: dsa: qca8k: add support for larger read/write size with mgmt Ethernet") CC: Ansuel Smith <ansuelsmth@gmail.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: kernel test robot <lkp@intel.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220209221304.GA17529@d2214a582157 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-10ice: Avoid RTNL lock when re-creating auxiliary deviceDave Ertman2-1/+5
If a call to re-create the auxiliary device happens in a context that has already taken the RTNL lock, then the call flow that recreates auxiliary device can hang if there is another attempt to claim the RTNL lock by the auxiliary driver. To avoid this, any call to re-create auxiliary devices that comes from an source that is holding the RTNL lock (e.g. netdev notifier when interface exits a bond) should execute in a separate thread. To accomplish this, add a flag to the PF that will be evaluated in the service task and dealt with there. Fixes: f9f5301e7e2d ("ice: Register auxiliary device to provide RDMA") Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Reviewed-by: Jonathan Toppins <jtoppins@redhat.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-02-10ice: Fix KASAN error in LAG NETDEV_UNREGISTER handlerDave Ertman1-6/+28
Currently, the same handler is called for both a NETDEV_BONDING_INFO LAG unlink notification as for a NETDEV_UNREGISTER call. This is causing a problem though, since the netdev_notifier_info passed has a different structure depending on which event is passed. The problem manifests as a call trace from a BUG: KASAN stack-out-of-bounds error. Fix this by creating a handler specific to NETDEV_UNREGISTER that only is passed valid elements in the netdev_notifier_info struct for the NETDEV_UNREGISTER event. Also included is the removal of an unbalanced dev_put on the peer_netdev and related braces. Fixes: 6a8b357278f5 ("ice: Respond to a NETDEV_UNREGISTER event for LAG") Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Acked-by: Jonathan Toppins <jtoppins@redhat.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-02-10ice: fix IPIP and SIT TSO offloadJesse Brandeburg2-8/+18
The driver was avoiding offload for IPIP (at least) frames due to parsing the inner header offsets incorrectly when trying to check lengths. This length check works for VXLAN frames but fails on IPIP frames because skb_transport_offset points to the inner header in IPIP frames, which meant the subtraction of transport_header from inner_network_header returns a negative value (-20). With the code before this patch, everything continued to work, but GSO was being used to segment, causing throughputs of 1.5Gb/s per thread. After this patch, throughput is more like 10Gb/s per thread for IPIP traffic. Fixes: e94d44786693 ("ice: Implement filter sync, NDO operations and bump version") Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-02-10ice: fix an error code in ice_cfg_phy_fec()Dan Carpenter1-1/+2
Propagate the error code from ice_get_link_default_override() instead of returning success. Fixes: ea78ce4dab05 ("ice: add link lenient and default override support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-02-10drm/bridge: dw-hdmi: use safe format when first in bridge chainNeil Armstrong1-2/+3
When the dw-hdmi bridge is in first place of the bridge chain, this means there is no way to select an input format of the dw-hdmi HW component. Since introduction of display-connector, negotiation was broken since the dw-hdmi negotiation code only worked when the dw-hdmi bridge was in last position of the bridge chain or behind another bridge also supporting input & output format negotiation. Commit 7cd70656d128 ("drm/bridge: display-connector: implement bus fmts callbacks") was introduced to make negotiation work again by making display-connector act as a pass-through concerning input & output format negotiation. But in the case where the dw-hdmi is single in the bridge chain, for example on Renesas SoCs, with the display-connector bridge the dw-hdmi is no more single, breaking output format. Reported-by: Biju Das <biju.das.jz@bp.renesas.com> Bisected-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Tested-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Fixes: 6c3c719936da ("drm/bridge: synopsys: dw-hdmi: add bus format negociation") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [narmstrong: add proper fixes commit] Reviewed-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220204143337.89221-1-narmstrong@baylibre.com
2022-02-10octeontx2-pf: Add TC feature for VFsSubbaraya Sundeep6-62/+69
This patch adds TC feature for VFs also. When MCAM rules are allocated for a VF then either TC or ntuple filters can be used. Below are the commands to use TC feature for a VF(say lbk0): devlink dev param set pci/0002:01:00.1 name mcam_count value 16 \ cmode runtime ethtool -K lbk0 hw-tc-offload on ifconfig lbk0 up tc qdisc add dev lbk0 ingress tc filter add dev lbk0 parent ffff: protocol ip flower skip_sw \ dst_mac 98:03:9b:83:aa:12 action police rate 100Mbit burst 5000 Also to modify any fields of the hardware context with NIX_AQ_INSTOP_WRITE command then corresponding masks of those fields must be set as per hardware. This was missing in ingress ratelimiting context. This patch sets those masks also. Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-10qed: prevent a fw assert during device shutdownVenkata Sudheer Kumar Bhavaraju3-2/+51
Device firmware can assert if the device shutdown path in driver encounters an async. events from mfw (processed in qed_mcp_handle_events()) after qed_mcp_unload_req() returns. A call to qed_mcp_unload_req() currently marks the device as inactive and thus stops any new events, but there is a windows where in-flight events might still be received by the driver. To prevent this race condition, atomically set QED_MCP_BYPASS_PROC_BIT in qed_mcp_unload_req() to make sure qed_mcp_handle_events() ignores all events. Wait for any event that might already be in-process to complete by monitoring QED_MCP_IN_PROCESSING_BIT. Signed-off-by: Pravin Kumar Ganesh Dhende <pdhende@marvell.com> Signed-off-by: Venkata Sudheer Kumar Bhavaraju <vbhavaraju@marvell.com> Signed-off-by: Alok Prasad <palok@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-10dpaa2-eth: unregister the netdev before disconnecting from the PHYRobert-Ionut Alexa1-2/+2
The netdev should be unregistered before we are disconnecting from the MAC/PHY so that the dev_close callback is called and the PHY and the phylink workqueues are actually stopped before we are disconnecting and destroying the phylink instance. Fixes: 719479230893 ("dpaa2-eth: add MAC/PHY support through phylink") Signed-off-by: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-10net: macb: Align the dma and coherent dma masksMarc St-Amand1-1/+1
Single page and coherent memory blocks can use different DMA masks when the macb accesses physical memory directly. The kernel is clever enough to allocate pages that fit into the requested address width. When using the ARM SMMU, the DMA mask must be the same for single pages and big coherent memory blocks. Otherwise the translation tables turn into one big mess. [ 74.959909] macb ff0e0000.ethernet eth0: DMA bus error: HRESP not OK [ 74.959989] arm-smmu fd800000.smmu: Unhandled context fault: fsr=0x402, iova=0x3165687460, fsynr=0x20001, cbfrsynra=0x877, cb=1 [ 75.173939] macb ff0e0000.ethernet eth0: DMA bus error: HRESP not OK [ 75.173955] arm-smmu fd800000.smmu: Unhandled context fault: fsr=0x402, iova=0x3165687460, fsynr=0x20001, cbfrsynra=0x877, cb=1 Since using the same DMA mask does not hurt direct 1:1 physical memory mappings, this commit always aligns DMA and coherent masks. Signed-off-by: Marc St-Amand <mstamand@ciena.com> Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Tested-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-10net: ieee802154: Drop duration settings when the core does it alreadyMiquel Raynal4-74/+0
The core now knows how to set the symbol duration in a few cases, when drivers correctly advertise the protocols used on each channel. For these drivers, there is no more need to bother with symbol duration, lifs and sifs periods so just drop the duplicated code. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Alexander Aring <aahringo@redhat.com> Link: https://lore.kernel.org/r/20220201180629.93410-5-miquel.raynal@bootlin.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2022-02-10net: mac802154: Convert the symbol duration into nanosecondsMiquel Raynal4-27/+27
Tdsym is often given in the spec as pretty small numbers in microseconds and hence was reflected in the code as symbol_duration and was stored as a u8. Actually, for UWB PHYs, the symbol duration is given in nanoseconds and are as precise as picoseconds. In order to handle better these PHYs, change the type of symbol_duration to u32 and store this value in nanoseconds. All the users of this variable are updated in a mechanical way. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Alexander Aring <aahringo@redhat.com> Link: https://lore.kernel.org/r/20220201180629.93410-3-miquel.raynal@bootlin.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2022-02-10net: ieee802154: ca8210: Fix lifs/sifs periodsMiquel Raynal1-2/+2
These periods are expressed in time units (microseconds) while 40 and 12 are the number of symbol durations these periods will last. We need to multiply them both with the symbol_duration in order to get these values in microseconds. Fixes: ded845a781a5 ("ieee802154: Add CA8210 IEEE 802.15.4 device driver") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20220201180629.93410-2-miquel.raynal@bootlin.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2022-02-10Merge tag 'mt76-for-kvalo-2022-02-04' of https://github.com/nbd168/wireless into mainKalle Valo54-2830/+3553
mt76 patches for 5.18 - mt7915 mcu code cleanup - mt7916 support - fixes for SDIO support - fixes for DFS - power management fixes - stability improvements - background radar detection support
2022-02-10Merge tag 'ieee802154-for-davem-2022-02-10' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan-nextDavid S. Miller2-120/+68
Stefan Schmidt says: ==================== pull-request: ieee802154-next 2022-02-10 An update from ieee802154 for your *net-next* tree. There is more ongoing in ieee802154 than usual. This will be the first pull request for this cycle, but I expect one more. Depending on review and rework times. Pavel Skripkin ported the atusb driver over to the new USB api to avoid unint problems as well as making use of the modern api without kmalloc() needs in he driver. Miquel Raynal landed some changes to ensure proper frame checksum checking with hwsim, documenting our use of wake and stop_queue and eliding a magic value by using the proper define. David Girault documented the address struct used in ieee802154. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-10drm/fb-helper: Clip damage area horizontallyThomas Zimmermann1-0/+12
Clip the damage area horizontally if only a single scanline has been changed. This is helpful to reduce the memcpy overhead for small writes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220209161617.3553-6-tzimmermann@suse.de
2022-02-10drm/fb-helper: Clip damage area to written memory rangeThomas Zimmermann1-7/+21
Write helpers used to mark the complete screen as dirty. This is wasteful for writes that only change a small portion of the screen. Fix the problem by computing the damaged area from the written memory range and perform damage handling accordingly. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220209161617.3553-5-tzimmermann@suse.de
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.