aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2022-09-22tty: serial: switch mpc52xx_uart_int_{r,t}x_chars() to boolJiri Slaby1-9/+9
mpc52xx_uart_int_rx_chars() returns unsigned int. mpc52xx_uart_int_tx_chars() returns int. The both results are binary ORed to the "keepgoing" variable. Unify all three to bool as the only interesting value is whether we should keep looping (true/false). Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220920052049.20507-7-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22tty: serial: extract tx_ready() from __serial_lpc32xx_tx()Jiri Slaby1-2/+8
The condition in __serial_lpc32xx_tx()'s loop is barely readable. Extract it to a separate function. This will make the cleanup in the next patches easier too. Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: <linux-arm-kernel@lists.infradead.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220920052049.20507-6-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22tty: serial: extract lqasc_tx_ready() from lqasc_tx_chars()Jiri Slaby1-2/+8
The condition in lqasc_tx_chars()'s loop is barely readable. Extract it to a separate function. This will make the cleanup in the next patches easier too. (Put it before lqasc_start_tx(), so that we can use it there later.) Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220920052049.20507-5-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22tty: serial: altera_uart_{r,t}x_chars() need only uart_portJiri Slaby1-6/+4
Both altera_uart_{r,t}x_chars() need only uart_port, not altera_uart. So pass the former from altera_uart_interrupt() directly. Apart it maybe saves a dereference, this makes the transition of altera_uart_tx_chars() easier to follow in the next patch. Cc: Tobias Klauser <tklauser@distanz.ch> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Acked-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220920052049.20507-4-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22tty: serial: clean up stop-tx part in altera_uart_tx_chars()Jiri Slaby1-4/+2
The "stop TX" path in altera_uart_tx_chars() is open-coded, so: * use uart_circ_empty() to check if the buffer is empty, and * when true, call altera_uart_stop_tx(). Cc: Tobias Klauser <tklauser@distanz.ch> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Acked-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220920052049.20507-3-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22tty: serial: move and cleanup vt8500_tx_empty()Jiri Slaby1-7/+8
Make vt8500_tx_empty() more readable by introducing a new local variable and move the function before handle_tx(). That way we can reuse it in there too. Cc: <linux-arm-kernel@lists.infradead.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220920052049.20507-2-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22tty: hvc: remove HVC_IUCV_MAGICнаб1-6/+5
According to Greg, in the context of magic numbers as defined in magic-number.rst, "the tty layer should not need this and I'll gladly take patches" This stretches that definition slightly, since it multiplexes it with the terminal number as a constant offset, but is equivalent Acked-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz> Ref: https://lore.kernel.org/linux-doc/YyMlovoskUcHLEb7@kroah.com/ Link: https://lore.kernel.org/r/8c8a2c9dfc1bfbe6ef3f3237368e483865fc1c29.1663288066.git.nabijaczleweli@nabijaczleweli.xyz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22tty: synclink_gt: remove MGSL_MAGICнаб1-8/+0
According to Greg, in the context of magic numbers as defined in magic-number.rst, "the tty layer should not need this and I'll gladly take patches" Acked-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz> Ref: https://lore.kernel.org/linux-doc/YyMlovoskUcHLEb7@kroah.com/ Link: https://lore.kernel.org/r/3d82b3c864970cdec6717c56dd906b54e78694d7.1663288066.git.nabijaczleweli@nabijaczleweli.xyz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22tty: n_hdlc: remove HDLC_MAGICнаб1-27/+0
According to Greg, in the context of magic numbers as defined in magic-number.rst, "the tty layer should not need this and I'll gladly take patches" Acked-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz> Ref: https://lore.kernel.org/linux-doc/YyMlovoskUcHLEb7@kroah.com/ Link: https://lore.kernel.org/r/c31d228302da3f426cebf6fcff855181a5590a66.1663288066.git.nabijaczleweli@nabijaczleweli.xyz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22tty: remove TTY_DRIVER_MAGICнаб1-1/+0
According to Greg, in the context of magic numbers as defined in magic-number.rst, "the tty layer should not need this and I'll gladly take patches" Acked-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz> Ref: https://lore.kernel.org/linux-doc/YyMlovoskUcHLEb7@kroah.com/ Link: https://lore.kernel.org/r/723478a270a3858f27843cbec621df4d5d44efcc.1663288066.git.nabijaczleweli@nabijaczleweli.xyz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22tty: remove TTY_MAGICнаб2-14/+0
According to Greg, in the context of magic numbers as defined in magic-number.rst, "the tty layer should not need this and I'll gladly take patches" Acked-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz> Ref: https://lore.kernel.org/linux-doc/YyMlovoskUcHLEb7@kroah.com/ Link: https://lore.kernel.org/r/476d024cd6b04160a5de381ea2b9856b60088cbd.1663288066.git.nabijaczleweli@nabijaczleweli.xyz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22drivers: serial: jsm: fix some leaks in probeDan Carpenter1-1/+2
This error path needs to unwind instead of just returning directly. Fixes: 03a8482c17dd ("drivers: serial: jsm: Enable support for Digi Classic adapters") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YyxFh1+lOeZ9WfKO@kili Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22serial: omap: Disallow RS-485 if rts-gpio is not specifiedLukas Wunner1-14/+13
The serial-omap driver requires an rts-gpio for RS-485 to work. Historically it has allowed enabling RS-485 even if no rts-gpio was specified in the device tree. That doesn't make any sense, so disable RS-485 on probe if rts-gpio is missing and disallow user space from enabling it. Three NULL pointer checks for up->rts_gpiod can be dropped as a result, simplifying the driver slightly. Cc: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lukas Wunner <lukas@wunner.de> Link: https://lore.kernel.org/r/f191dcca0d8ea03598c463fc0d3fba8941ff2275.1662888075.git.lukas@wunner.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22tty: serial: cpm_uart: remove unused cpm_uart_nr declarationGaosheng Cui1-1/+0
cpm_uart_nr has been removed since commit 0b2a2e5b7747 ("cpm_uart: Remove !CONFIG_PPC_CPM_NEW_BINDING code"), so remove it. Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Link: https://lore.kernel.org/r/20220911093654.3222701-1-cuigaosheng1@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22perf: arm64: Add SVE vector granule register to user regsJames Clark1-1/+1
Dwarf based unwinding in a function that pushes SVE registers onto the stack requires the unwinder to know the length of the SVE register to calculate the stack offsets correctly. This was added to the Arm specific Dwarf spec as the VG pseudo register[1]. Add the vector length at position 46 if it's requested by userspace and SVE is supported. If it's not supported then fail to open the event. The vector length must be on each sample because it can be changed at runtime via a prctl or ptrace call. Also by adding it as a register rather than a separate attribute, minimal changes will be required in an unwinder that already indexes into the register list. [1]: https://github.com/ARM-software/abi-aa/blob/main/aadwarf64/aadwarf64.rst Reviewed-by: Mark Brown <broonie@kernel.org> Signed-off-by: James Clark <james.clark@arm.com> Link: https://lore.kernel.org/r/20220901132658.1024635-2-james.clark@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2022-09-22tty: n_gsm: add debug bit for user payloadDaniel Starke1-0/+5
A debug bit to output a complete transmission dump exists. Sometimes only the user frames are relevant. Add an additional bit which limits the transmission dump output to user data frames if set. Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220831073800.7459-6-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22tty: n_gsm: name the debug bitsDaniel Starke1-12/+19
Introduce defines to name the various debug bits used within the code to improve readability and to make its specific use clear. Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220831073800.7459-5-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22tty: n_gsm: introduce gsm_control_command() functionDaniel Starke1-7/+26
Move the content of gsm_control_transmit() to a new function gsm_control_command() with a more generic signature and analog to gsm_control_reply(). Use this within gsm_control_transmit(). This is needed to simplify upcoming functional additions. Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220831073800.7459-4-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22tty: n_gsm: replace use of gsm_read_ea() with gsm_read_ea_val()Daniel Starke1-48/+47
Replace the use of gsm_read_ea() with gsm_read_ea_val() where applicable to improve code readability and avoid errors like in the past. See first link below for reference. Link: https://lore.kernel.org/all/20220504081733.3494-1-daniel.starke@siemens.com/ Link: https://lore.kernel.org/all/202208222147.WfFRmf1r-lkp@intel.com/ Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220831073800.7459-3-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22tty: n_gsm: name gsm tty device minorsDaniel Starke1-1/+4
Add a macro which defines the possible number of virtual devices for n_gsm to improve code readability. Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220831073800.7459-2-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22tty: n_gsm: add enumeration for gsm encodingsDaniel Starke1-13/+17
Add an enumeration for the gsm mux encoding types to improve code readability and to avoid invalid values. Only two values are defined by the standard: - basic option mode - advanced option mode (uses ISO HDLC standard transparency mechanism) Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220831073800.7459-1-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22platform/x86: hp-wmi: Support touchpad on/offDaniel Houldsworth1-9/+11
Add scancodes reported by the touchpad on/off button. The actual disabling and enabling is done in hardware, and this just reports that change to userspace. Signed-off-by: Daniel Houldsworth <dhould3@gmail.com> Link: https://lore.kernel.org/r/20220922115459.6511-1-dhould3@gmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-09-22platform/x86: int3472/discrete: Drop a forward declarationUwe Kleine-König1-18/+16
By swapping the definition of skl_int3472_discrete_remove() and skl_int3472_discrete_probe() the forward declaration of the former can be dropped. This is a good thing as it removes code duplication. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Daniel Scally <djrscally@gmail.com> Link: https://lore.kernel.org/r/20220920070101.907596-1-u.kleine-koenig@pengutronix.de Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-09-22platform/x86: toshiba_acpi: change turn_on_panel_on_resume to staticYang Yingliang1-1/+1
turn_on_panel_on_resume is only used in toshiba_acpi.c now, change it to static. Fixes: 3cb1f40dfdc3 ("drivers/platform: toshiba_acpi: Call HCI_PANEL_POWER_ON on resume on some models") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220920084434.3739493-1-yangyingliang@huawei.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-09-22Revert "usb: storage: Add quirk for Samsung Fit flash"sunghwan jung1-6/+0
This reverts commit 86d92f5465958752481269348d474414dccb1552, which fix the timeout issue for "Samsung Fit Flash". But the commit affects not only "Samsung Fit Flash" but also other usb storages that use the same controller and causes severe performance regression. # hdparm -t /dev/sda (without the quirk) Timing buffered disk reads: 622 MB in 3.01 seconds = 206.66 MB/sec # hdparm -t /dev/sda (with the quirk) Timing buffered disk reads: 220 MB in 3.00 seconds = 73.32 MB/sec The commit author mentioned that "Issue was reproduced after device has bad block", so this quirk should be applied when we have the timeout issue with a device that has bad blocks. We revert the commit so that we apply this quirk by adding kernel paramters using a bootloader or other ways when we really need it, without the performance regression with devices that don't have the issue. Signed-off-by: sunghwan jung <onenowy@gmail.com> Link: https://lore.kernel.org/r/20220913114913.3073-1-onenowy@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22usb: dwc3: core: fix some leaks in probeDan Carpenter1-22/+36
The dwc3_get_properties() function calls: dwc->usb_psy = power_supply_get_by_name(usb_psy_name); so there is some additional clean up required on these error paths. Fixes: 6f0764b5adea ("usb: dwc3: add a power supply for current control") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YyxFYFnP53j9sCg+@kili Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22usb: dwc3: core: Enable GUCTL1 bit 10 for fixing termination error after resume bugPiyush Mehta2-0/+21
When configured in HOST mode, after issuing U3/L2 exit controller fails to send proper CRC checksum in CRC5 field. Because of this behavior Transaction Error is generated, resulting in reset and re-enumeration of usb device attached. Enabling chicken bit 10 of GUCTL1 will correct this problem. When this bit is set to '1', the UTMI/ULPI opmode will be changed to "normal" along with HS terminations, term, and xcvr signals after EOR. This option is to support certain legacy UTMI/ULPI PHYs. Added "snps,resume-hs-terminations" quirk to resolved the above issue. Signed-off-by: Piyush Mehta <piyush.mehta@amd.com> Link: https://lore.kernel.org/r/20220920052235.194272-3-piyush.mehta@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22USB: add RESET_RESUME quirk for NVIDIA Jetson devices in RCMHannu Hartikainen1-0/+9
NVIDIA Jetson devices in Force Recovery mode (RCM) do not support suspending, ie. flashing fails if the device has been suspended. The devices are still visible in lsusb and seem to work otherwise, making the issue hard to debug. This has been discovered in various forum posts, eg. [1]. The patch has been tested on NVIDIA Jetson AGX Xavier, but I'm adding all the Jetson models listed in [2] on the assumption that they all behave similarly. [1]: https://forums.developer.nvidia.com/t/flashing-not-working/72365 [2]: https://docs.nvidia.com/jetson/archives/l4t-archived/l4t-3271/index.html#page/Tegra%20Linux%20Driver%20Package%20Development%20Guide/quick_start.html Signed-off-by: Hannu Hartikainen <hannu@hrtk.in> Cc: stable <stable@kernel.org> # after 6.1-rc3 Link: https://lore.kernel.org/r/20220919171610.30484-1-hannu@hrtk.in Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22usb: dwc3: core: add gfladj_refclk_lpm_sel quirkAlexander Stein2-1/+9
This selects the SOF/ITP counter be running on ref_clk. As documented U2_FREECLK_EXISTS has to be set to 0 as well. Reviewed-by: Li Jun <jun.li@nxp.com> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Link: https://lore.kernel.org/r/20220915062855.751881-3-alexander.stein@ew.tq-group.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22usb: musb: Fix musb_gadget.c rxstate overflow bugRobin Guo1-0/+3
The usb function device call musb_gadget_queue() adds the passed request to musb_ep::req_list,If the (request->length > musb_ep->packet_sz) and (is_buffer_mapped(req) return false),the rxstate() will copy all data in fifo to request->buf which may cause request->buf out of bounds. Fix it by add the length check : fifocnt = min_t(unsigned, request->length - request->actual, fifocnt); Signed-off-by: Robin Guo <guoweibin@inspur.com> Link: https://lore.kernel.org/r/20220906102119.1b071d07a8391ff115e6d1ef@inspur.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22usb: dwc3: pci: Add PCIe device ID for USB3 controller on CPU sub-system for Alder Lake PShruthi Sanil1-0/+4
USB3 PCIe device ID's needs to be updated for the device to enumerate as a USB3 device on the host for Alder Lake P. Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Shruthi Sanil <shruthi.sanil@intel.com> Link: https://lore.kernel.org/r/20220913055316.23050-3-shruthi.sanil@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22usb: dwc3: pci: Update the macro names for USB PCIe device ID's for Alder Lake platformsShruthi Sanil1-6/+6
The device ID 0x465e is defined for the USB3 device controller in the CPU sub-system of Alder Lake N platform. Hence updating the macro name accordingly. The device ID 0x54ee is defined for the USB2 controller on the PCH sub-system for Alder Lake N platform. Hence updating the macro name accordingly. The device ID's defined for Alder Lake P is shared between Alder Lake P, Alder Lake PS and Alder Lake M. Hence updating the macro name to ADL from ADLP to make it common and keeping it aligned with the xHCI ID's naming convention. As we have two device controllers on Alder Lake platforms i.e. one on PCH sub-system and another on CPU sub-system(USB3), appending _PCH for the USB2 device ID macro to differentiate between the 2 ID's. Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Shruthi Sanil <shruthi.sanil@intel.com> Link: https://lore.kernel.org/r/20220913055316.23050-2-shruthi.sanil@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22usb: dwc3: xilinx: fix usb3 non-wakeup source resume failurePiyush Mehta1-9/+21
When USB is in super-speed mode and disabled as a wakeup source, observed that on the resume path, lanes have not been configured properly in the phy-zynqmp driver. As a result, after the resume, USB device detection failed on host. To resolved the above issue, added phy_init on resume and phy_exit on suspend path, to configure the GT lanes correctly. The re-initialization of phy, reset the device and re-enumerate the USB subsystem. This use-case is specific to Xilinx ZynqMP SoC. Signed-off-by: Piyush Mehta <piyush.mehta@amd.com> Link: https://lore.kernel.org/r/20220912111017.901321-3-piyush.mehta@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22usb: dwc3: xilinx: add power management ops supportPiyush Mehta1-4/+29
Added system sleep and run-time power management ops support for dwc3-xilinx glue layer and update function name. Signed-off-by: Piyush Mehta <piyush.mehta@amd.com> Link: https://lore.kernel.org/r/20220912111017.901321-2-piyush.mehta@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22usb: gadget: uvc: add v4l2 try_format api callMichael Grzeschik1-0/+110
This patch adds the uvc_v4l2_try_format api call to validate the setting of v4l2_format. It will fallback to the nearest allowed framesize. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Link: https://lore.kernel.org/r/20220909221335.15033-5-m.grzeschik@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22usb: gadget: uvc: add v4l2 enumeration api callsMichael Grzeschik3-0/+208
This patch adds support to the v4l2 VIDIOCs for enum_format, enum_framesizes and enum_frameintervals. This way, the userspace application can use these VIDIOCS to query the via configfs exported frame capabilities. With thes callbacks the userspace doesn't have to bring its own configfs parser. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Link: https://lore.kernel.org/r/20220909221335.15033-4-m.grzeschik@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22media: uvcvideo: move uvc_format_desc to common headerMichael Grzeschik3-349/+2
The uvc_format_desc, GUID defines and the uvc_format_by_guid helper is also useful for the uvc gadget stack. This patch moves them to a common header. Tested-by: Daniel Scally <dan.scally@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Link: https://lore.kernel.org/r/20220909221335.15033-3-m.grzeschik@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22media: v4l: move helper functions for fractions from uvc to v4l2-commonMichael Grzeschik4-94/+93
The functions uvc_simplify_fraction and uvc_fraction_to_interval are generic helpers which are also useful for other v4l2 drivers. This patch moves them to v4l2-common. Tested-by: Daniel Scally <dan.scally@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Link: https://lore.kernel.org/r/20220909221335.15033-2-m.grzeschik@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22usb: dwc3: qcom: drop unneeded compatiblesKrzysztof Kozlowski1-4/+0
All Qualcomm SoC DWC3 USB devices have a qcom,dwc3 fallback, thus there is no need to keep the list of compatibles growing. Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220921084654.118230-1-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22usb: dwc3: gadget: Do not clear ep delayed stop flag during ep disableWesley Cheng1-1/+10
DWC3_EP_DELAYED_STOP is utilized to defer issuing the end transfer command until the subsequent SETUP stage, in order to avoid end transfer timeouts. During cable disconnect scenarios, __dwc3_gadget_ep_disable() is responsible for ensuring endpoints have no active transfers pending. Since dwc3_remove_request() can now exit early if the EP delayed stop is set, avoid clearing all DEP flags, otherwise the transition back into the SETUP stage won't issue an endxfer command. Fixes: 2b2da6574e77 ("usb: dwc3: Avoid unmapping USB requests if endxfer is not complete") Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com> Link: https://lore.kernel.org/r/20220919231213.21364-1-quic_wcheng@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22usb: mon: make mmapped memory read onlyTadeusz Struk1-0/+5
Syzbot found an issue in usbmon module, where the user space client can corrupt the monitor's internal memory, causing the usbmon module to crash the kernel with segfault, UAF, etc. The reproducer mmaps the /dev/usbmon memory to user space, and overwrites it with arbitrary data, which causes all kinds of issues. Return an -EPERM error from mon_bin_mmap() if the flag VM_WRTIE is set. Also clear VM_MAYWRITE to make it impossible to change it to writable later. Cc: "Dmitry Vyukov" <dvyukov@google.com> Cc: stable <stable@kernel.org> Fixes: 6f23ee1fefdc ("USB: add binary API to usbmon") Suggested-by: PaX Team <pageexec@freemail.hu> # for the VM_MAYRITE portion Link: https://syzkaller.appspot.com/bug?id=2eb1f35d6525fa4a74d75b4244971e5b1411c95a Reported-by: syzbot+23f57c5ae902429285d7@syzkaller.appspotmail.com Signed-off-by: Tadeusz Struk <tadeusz.struk@linaro.org> Link: https://lore.kernel.org/r/20220919215957.205681-1-tadeusz.struk@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22usb: typec: anx7411: Use of_get_child_by_name() instead of of_find_node_by_name()Liang He1-2/+2
In anx7411_typec_switch_probe(), we should call of_get_child_by_name() instead of of_find_node_by_name() as of_find_xxx API will decrease the refcount of the 'from' argument. Fixes: fe6d8a9c8e64 ("usb: typec: anx7411: Add Analogix PD ANX7411 support") Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Liang He <windhl@126.com> Link: https://lore.kernel.org/r/20220915092209.4009273-1-windhl@126.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22usb: gadget: add _init/__exit annotations to module init/exit funcsXiu Jianfeng2-4/+4
Add missing _init/__exit annotations to module init/exit funcs. Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com> Link: https://lore.kernel.org/r/20220917084413.23957-1-xiujianfeng@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22usb: dwc2: Remove redundant license textChristophe JAILLET12-360/+1
SPDX-License-Identifier have been added in commit 5fd54ace4721 ("USB: add SPDX identifiers to all remaining files in drivers/usb/") There is no point in keeping the now redundant license text. Remove it. Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/030a7e187d707f8734a492cda7a6b54d459c4bb3.1662788747.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22usb: dwc3: Fix typos in gadget.cKushagra Verma1-2/+2
Fixes the following two typos: 1. reinitate -> reinitiate 2. revison -> revision Signed-off-by: Kushagra Verma <kushagra765@outlook.com> Link: https://lore.kernel.org/r/HK0PR01MB280110FAB74B4B2ACE32EA5FF8479@HK0PR01MB2801.apcprd01.prod.exchangelabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22usb: gadget: function: fix dangling pnp_string in f_printer.cAlbert Briscoe1-6/+6
When opts->pnp_string is changed with configfs, new memory is allocated for the string. It does not, however, update dev->pnp_string, even though the memory is freed. When rquesting the string, the host then gets old or corrupted data rather than the new string. The ieee 1284 id string should be allowed to change while the device is connected. The bug was introduced in commit fdc01cc286be ("usb: gadget: printer: Remove pnp_string static buffer"), which changed opts->pnp_string from a char[] to a char*. This patch changes dev->pnp_string from a char* to a char** pointing to opts->pnp_string. Fixes: fdc01cc286be ("usb: gadget: printer: Remove pnp_string static buffer") Signed-off-by: Albert Briscoe <albertsbriscoe@gmail.com> Link: https://lore.kernel.org/r/20220911223753.20417-1-albertsbriscoe@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22xhci: remove unused lpm_failed_dev member from struct xhci_hcdMathias Nyman1-2/+0
xhci used to test if link power management (LPM) capable USB2 devices really could enter and exit L1 state link state. Failed devices were added to a lpm_failed_dev list. This feature was removed 9 years ago in commit de68bab4fa96 ("usb: Don't enable USB 2.0 Link PM by default.") but lpm_failed_dev member was still left. Remove it now. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220921123450.671459-7-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22xhci: remove unused command member from struct xhci_hcd structMathias Nyman1-1/+0
The u32 command was added to struct xhci_hcd over 10 years ago in commit 9777e3ce907d ("USB: xHCI: bus power management implementation") It wasn't even used back then, so remove it. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220921123450.671459-6-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22xhci: show fault reason for a failed enable slot commandMathias Nyman1-1/+2
Show the completion code of a unsuccessful "enable slot" command. Add it in a human readable form to the existing error message. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220921123450.671459-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22xhci: Don't show warning for reinit on known broken suspendMario Limonciello1-1/+2
commit 8b328f8002bc ("xhci: re-initialize the HC during resume if HCE was set") introduced a new warning message when the host controller error was set and re-initializing. This is expected behavior on some designs which already set `xhci->broken_suspend` so the new warning is alarming to some users. Modify the code to only show the warning if this was a surprising behavior to the XHCI driver. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216470 Fixes: 8b328f8002bc ("xhci: re-initialize the HC during resume if HCE was set") Reported-by: Artem S. Tashkinov <aros@gmx.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220921123450.671459-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.