aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2022-02-03mt76: mt7915: use proper aid value in mt7915_mcu_sta_basic_tlvLorenzo Bianconi1-1/+3
Similar to mt7915_mcu_wtbl_generic_tlv, rely on vif->bss_conf.aid for aid in sta mode and not on sta->aid. Fixes: e57b7901469fc ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: use proper aid value in mt7915_mcu_wtbl_generic_tlv in sta modeLorenzo Bianconi1-1/+4
mac80211 provides aid in vif->bss_conf.aid for sta mode and not in sta->aid. Fix mt7915_mcu_wtbl_generic_tlv routine using proper value for aid in sta mode. Fixes: e57b7901469fc ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: make mt76_sar_capa staticLorenzo Bianconi1-1/+1
Fix the following sparse warning: drivers/net/wireless/mediatek/mt76/mac80211.c:183:32: warning: symbol 'mt76_sar_capa' was not declared. Should it be static? Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: add device id for mt7916Bo Jiao3-4/+6
Add pci_device_id to enable mt7916. Note that MT_HW_CHIPID is no longer used for further chips, so drop it accordingly. Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: set wlan_idx_hi on mt7916Bo Jiao2-1/+6
Since mt7916 supports up to 544 wcid entries, wlan_idx_hi needs to be set in order to support wcid index >= 256 Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: connac: move mt76_connac_mcu_add_key in connac moduleLorenzo Bianconi9-200/+110
Move key configuration code shared between mt7921 and mt7915 in mt76-connac module and remove duplicated code. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: rely on mt76_connac_get_phy utilitiesLorenzo Bianconi3-72/+22
Rely on mt76_connac_get_phy_mode and mt76_connac_get_he_phy_cap utility routines in mt7915 driver and remove duplicated code. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: connac: move mt76_connac_chan_bw in common codeLorenzo Bianconi3-41/+22
Move mt76_connac_chan_bw in mt76-connac code and remove duplicated code from mt7921 and mt7915 driver. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: connac: move mt76_connac_mcu_get_cipher in common codeLorenzo Bianconi3-56/+29
Move mt76_connac_mcu_get_cipher in mt76-connac code and remove duplicated code from mt7921 and mt7915 driver. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: rely on mt76_connac_mcu_add_tlv routineLorenzo Bianconi1-77/+45
Rely on common code available in mt76-connac module and remove mt7915_mcu_add_tlv/mt7915_mcu_add_nested_tlv in mt7915 driver. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: rely on mt76_connac_mcu_alloc_wtbl_reqLorenzo Bianconi1-34/+9
Rely on mt76_connac_mcu_alloc_wtbl_req routine and remove duplicated code. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: rely on mt76_connac_mcu_alloc_sta_reqLorenzo Bianconi6-57/+44
Rely on mt76_connac_mcu_alloc_sta_req routine and remove duplicated code. Add MT76_CONNAC_LIB module dependency in mt7915 module Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: connac: fix sta_rec_wtbl tag lenLorenzo Bianconi1-1/+1
Similar to mt7915 driver, fix tag len error for sta_rec_wtbl, which causes fw parsing error for the tags placed behind it. Fixes: d0e274af2f2e4 ("mt76: mt76_connac: create mcu library") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: add mt7916 calibrated data supportBo Jiao3-6/+20
Adjust proper eeprom size and add default calibrated data support for mt7916. Co-developed-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: update mt7915_chan_mib_offs for mt7916Bo Jiao2-5/+16
Update v2 offset. This is an intermediate patch to add mt7916 support. Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: update rx rate reporting for mt7916Bo Jiao4-76/+121
mt7916 reports rx rate from rxd group3 directly. Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: add txfree event v3Bo Jiao2-14/+31
Update txfree v3 format. This is an intermediate patch to add mt7916 support. Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Reviewed-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: enlarge wcid size to 544Bo Jiao4-4/+10
The mt7916 can support up to 544 wcid entries. This is an intermediate patch to add mt7916 support. Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: rework eeprom.c to adapt mt7916 changesBo Jiao4-37/+106
This is an intermediate patch to add mt7916 support. Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: add firmware support for mt7916Bo Jiao5-52/+110
Update firmware initialization for mt7916. This is an intermediate patch to add mt7916 support. Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: rework dma.c to adapt mt7916 changesBo Jiao6-99/+259
The RXQ of mt7916 are separated to MT_RXQ_MAIN_WA and MT_RXQ_MCU_WA, so, add initialization and preftech setting for the queue MT_RXQ_MAIN_WA. This is an intermediate patch to add mt7916 support. Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: add MT_RXQ_MAIN_WA for mt7916Bo Jiao2-2/+12
mt7916 add MT_RXQ_MAIN_WA to receive tx free event separately This is an intermediate patch to add mt7916 support. Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: refine register definitionBo Jiao9-400/+938
Add mt7915_reg_desc to differentiate chip generations. This is an intermediate patch to introduce mt7916 support. Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: add mt7915_mmio_probe() as a common probing functionBo Jiao3-218/+255
Add mt7915_mmio_probe() which will be used for the upcoming devices. This is an intermediate patch to add mt7916 support. Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: fix polling firmware-own statusFelix Fietkau2-1/+2
Check the register status bit instead of the trigger bit Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03PCI: hv: Fix NUMA node assignment when kernel boots with custom NUMA topologyLong Li1-2/+11
When kernel boots with a NUMA topology with some NUMA nodes offline, the PCI driver should only set an online NUMA node on the device. This can happen during KDUMP where some NUMA nodes are not made online by the KDUMP kernel. This patch also fixes the case where kernel is booting with "numa=off". Fixes: 999dd956d838 ("PCI: hv: Add support for protocol 1.3 and support PCI_BUS_RELATIONS2") Signed-off-by: Long Li <longli@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Tested-by: Purna Pavan Chandra Aekkaladevi <paekkaladevi@microsoft.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Link: https://lore.kernel.org/r/1643247814-15184-1-git-send-email-longli@linuxonhyperv.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2022-02-03fbdev: fbmem: Fix the implicit type castingYizhuo Zhai1-0/+2
In function do_fb_ioctl(), the "arg" is the type of unsigned long, and in "case FBIOBLANK:" this argument is casted into an int before passig to fb_blank(). In fb_blank(), the comparision if (blank > FB_BLANK_POWERDOWN) would be bypass if the original "arg" is a large number, which is possible because it comes from the user input. Fix this by adding the check before the function call. Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Helge Deller <deller@gmx.de> Signed-off-by: Yizhuo Zhai <yzhai003@ucr.edu> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220202235811.1621017-1-yzhai003@ucr.edu
2022-02-03Drivers: hv: Compare cpumasks and not their weights in init_vp_index()Vitaly Kuznetsov1-2/+1
The condition is supposed to check whether 'allocated_mask' got fully exhausted, i.e. there's no free CPU on the NUMA node left so we have to use one of the already used CPUs. As only bits which correspond to CPUs from 'cpumask_of_node(numa_node)' get set in 'allocated_mask', checking for the equal weights is technically correct but not obvious. Let's compare cpumasks directly. No functional change intended. Suggested-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20220128103412.3033736-3-vkuznets@redhat.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2022-02-03Drivers: hv: Rename 'alloced' to 'allocated'Vitaly Kuznetsov3-17/+17
'Alloced' is not a real word and only saves us two letters, let's use 'allocated' instead. No functional change intended. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20220128103412.3033736-2-vkuznets@redhat.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2022-02-03Drivers: hv: vmbus: Use struct_size() helper in kmalloc()Gustavo A. R. Silva1-1/+1
Make use of the struct_size() helper instead of an open-coded version, in order to avoid any potential type mistakes or integer overflows that, in the worst scenario, could lead to heap overflows. Also, address the following sparse warnings: drivers/hv/vmbus_drv.c:1132:31: warning: using sizeof on a flexible structure Link: https://github.com/KSPP/linux/issues/174 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20220125180131.GA67746@embeddedor Signed-off-by: Wei Liu <wei.liu@kernel.org>
2022-02-03optee: use driver internal tee_context for some rpcJens Wiklander4-67/+64
Adds a driver private tee_context by moving the tee_context in struct optee_notif to struct optee. This tee_context was previously used when doing internal calls to secure world to deliver notification. The new driver internal tee_context is now also when allocating driver private shared memory. This decouples the shared memory object from its original tee_context. This is needed when the life time of such a memory allocation outlives the client tee_context. This patch fixes the problem described below: The addition of a shutdown hook by commit f25889f93184 ("optee: fix tee out of memory failure seen during kexec reboot") introduced a kernel shutdown regression that can be triggered after running the OP-TEE xtest suites. Once the shutdown hook is called it is not possible to communicate any more with the supplicant process because the system is not scheduling task any longer. Thus if the optee driver shutdown path receives a supplicant RPC request from the OP-TEE we will deadlock the kernel's shutdown. Fixes: f25889f93184 ("optee: fix tee out of memory failure seen during kexec reboot") Fixes: 217e0250cccb ("tee: use reference counting for tee_context") Reported-by: Lars Persson <larper@axis.com> Cc: stable@vger.kernel.org Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2022-02-03net: dsa: xrs700x: convert to phylink_generic_validate()Russell King (Oracle)1-18/+11
Populate the supported interfaces and MAC capabilities for the xrs700x family of DSA switches and remove the old validate implementation to allow DSA to use phylink_generic_validate() for this switch driver. According to commit ee00b24f32eb ("net: dsa: add Arrow SpeedChips XRS700x driver") the switch supports one RMII port and up to three RGMII ports. This commit assumes that port 0 is the RMII port and the remainder are RGMII. This commit also results in the Autoneg bit being set in the ethtool link modes, which wasn't in the original; if this switch supports RGMII to a 10/100/1G PHY, then surely we want to allow Autoneg on the PHY. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-03net: dsa: qca8k: convert to phylink_generic_validate()Russell King (Oracle)1-47/+19
Populate the supported interfaces and MAC capabilities for the QCA8K DSA switch and remove the old validate implementation to allow DSA to use phylink_generic_validate() for this switch driver. In making this change, we bring consistency to the ethtool linkmodes that phylink's validate step produces, thereby following the expected behaviour as the phylink documentation has explained. Specifically, the ethtool 1000baseX_Full capability is now permitted for all interface modes, as it is a property of the PHY driver whether 1000baseX fiber connections can be supported. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-03net: dsa: ksz8795: convert to phylink_generic_validate()Russell King (Oracle)1-33/+12
Populate the supported interfaces and MAC capabilities for the Microchip KSZ8795 DSA switch and remove the old validate implementation to allow DSA to use phylink_generic_validate() for this switch driver. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-03net: dsa: bcm_sf2: convert to phylink_generic_validate()Russell King (Oracle)1-39/+15
Populate the supported interfaces and MAC capabilities for the bcm_sf2 DSA switch and remove the old validate implementation to allow DSA to use phylink_generic_validate() for this switch driver. The exclusion of Gigabit linkmodes for MII and Reverse MII links is handled within phylink_generic_validate() in phylink, so there is no need to make them conditional on the interface mode in the driver. Thanks to Florian Fainelli for suggesting how to populate the supported interfaces. Link: https://lore.kernel.org/r/3b3fed98-0c82-99e9-dc72-09fe01c2bcf3@gmail.com Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-03net: dsa: ar9331: convert to phylink_generic_validate()Russell King (Oracle)1-35/+10
Populate the supported interfaces and MAC capabilities for the AR9331 DSA switch and remove the old validate implementation to allow DSA to use phylink_generic_validate() for this switch driver. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-03platform/surface: surface3-wmi: Simplify resource managementChristophe JAILLET1-4/+1
's3_wmi.input' is a managed resource, so there should be no need to free it explicitly. Moreover, 's3_wmi' is a global variable. 's3_wmi.input' should be NULL when this error handling path is executed, because it has not been assigned yet. All this is puzzling. So simplify it and remove a few lines of code to have it be more straightforward. Fixes: 3dda3b3798f9 ("platform/x86: Add custom surface3 platform device for controlling LID") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> Link: https://lore.kernel.org/r/8b1a6d05036d5d9527241b2345482b369331ce5c.1643531799.git.christophe.jaillet@wanadoo.fr Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-02-03platform/surface: Replace acpi_bus_get_device()Rafael J. Wysocki2-9/+6
Replace acpi_bus_get_device() that is going to be dropped with acpi_fetch_acpi_dev(). No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> Link: https://lore.kernel.org/r/5805278.lOV4Wx5bFT@kreacher Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-02-03platform/x86: Replace acpi_bus_get_device()Rafael J. Wysocki5-23/+15
Replace acpi_bus_get_device() that is going to be dropped with acpi_fetch_acpi_dev(). No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/2631712.mvXUDI8C0e@kreacher Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-02-03platform/x86: thinkpad_acpi: Add dual-fan quirk for T15g (2nd gen)Hans de Goede1-0/+1
The ThinkPad T15g Gen 2 has 2 fan, add a TPACPI_FAN_2CTL quirk entry for it to the fan_quirk_table[] so that both fans can be controllerd. Reported-and-tested-by: David Dreschner <david@dreschner.net> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220203103302.49401-1-hdegoede@redhat.com
2022-02-03PCI: mvebu: Fix reporting Data Link Layer Link Active on emulated bridgePali Rohár1-3/+8
Add support for reporting PCI_EXP_LNKSTA_DLLLA bit in Link Control register on emulated bridge via PCIE_STAT_OFF reg. Function mvebu_pcie_link_up() already parses this register and returns if Data Link is Active or not. Also correctly indicate DLLLA capability via PCI_EXP_LNKCAP_DLLLARC bit in Link Control Capability register which is required for reporting DLLLA bit. Link: https://lore.kernel.org/r/20220104153529.31647-12-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org>
2022-02-03PCI: mvebu: Update comment for PCI_EXP_LNKCTL register on emulated bridgePali Rohár1-4/+3
Logic and code for clearing PCI_EXP_LNKCTL_CLKREQ_EN bit is correct, but comment describing it is misleading. PCI_EXP_LNKCTL_CLKREQ_EN bit should be hardwired to zero but mvebu hw allows to change it. Link: https://lore.kernel.org/r/20220104153529.31647-11-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org>
2022-02-03PCI: mvebu: Update comment for PCI_EXP_LNKCAP register on emulated bridgePali Rohár1-2/+2
Reason for clearing this bit is because mvebu hw returns incorrectly this bit set to 1. Link: https://lore.kernel.org/r/20220104153529.31647-10-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org>
2022-02-03PCI: mvebu: Properly initialize vendor, device and revision of emulated bridgePali Rohár1-4/+5
With this change also PCI vendor id is read from mvebu registers. Link: https://lore.kernel.org/r/20220104153529.31647-9-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org>
2022-02-03PCI: mvebu: Set PCI_BRIDGE_EMUL_NO_IO_FORWARD when IO is unsupportedPali Rohár1-19/+10
This will make PCI bridge to return zeros when accessing IO base and limit registers, as required by PCIe base specification. This allows to remove adhoc checks around mvebu_pcie_handle_iobase_change() function for unsupported IO ranges. PCI_BRIDGE_EMUL_NO_IO_FORWARD ensures that there will be no non-zeros write to IO registers when IO is not supported. Link: https://lore.kernel.org/r/20220104153529.31647-8-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org>
2022-02-03PCI: mvebu: Remove duplicate nports assignmentPali Rohár1-2/+0
Member pcie->nports is initialized to correct value before the previous for-loop. There is not need to initialize it more times. Link: https://lore.kernel.org/r/20220104153529.31647-7-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2022-02-03PCI: mvebu: Add help string for CONFIG_PCI_MVEBU optionPali Rohár1-0/+4
There is no description for CONFIG_PCI_MVEBU option. Add it. Link: https://lore.kernel.org/r/20220104153529.31647-6-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2022-02-03PCI: pci-bridge-emul: Add support for new flag PCI_BRIDGE_EMUL_NO_IO_FORWARDPali Rohár2-0/+15
Like PCI_BRIDGE_EMUL_NO_PREFMEM_FORWARD, this new flag specifies that emulated PCI bridge does not support forwarding of IO requests in given range between primary and secondary buses. This flag should be used as argument for pci_bridge_emul_init() for hardware setup without IO support. Setting this flag cause that IO base and limit registers are read-only. Link: https://lore.kernel.org/r/20220104153529.31647-5-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org>
2022-02-03PCI: pci-bridge-emul: Rename PCI_BRIDGE_EMUL_NO_PREFETCHABLE_BAR to PCI_BRIDGE_EMUL_NO_PREFMEM_FORWARDPali Rohár3-3/+7
This flag describe whether PCI bridge supports forwarding of prefetchable memory requests in given range between primary and secondary buses. It does not specify if bridge has support for prefetchable memory BAR (moreover this pci-bridge-emul.c driver does not provide support for BARs). So change name of this flag to be less misleading and add comment. Link: https://lore.kernel.org/r/20220104153529.31647-4-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org>
2022-02-03PCI: pci-bridge-emul: Make struct pci_bridge_emul_ops as constPali Rohár3-3/+3
It is read-only constant structure, so properly mark it with const keyword. Link: https://lore.kernel.org/r/20220104153529.31647-3-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.