| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
For now, if the XDP prog returns XDP_PASS on XSK, the metadata will
be lost as it doesn't get copied to the skb.
Copy it along with the frame headers. Account its size on skb
allocation, and when copying just treat it as a part of the frame
and do a pull after to "move" it to the "reserved" zone.
net_prefetch() xdp->data_meta and align the copy size to speed-up
memcpy() a little and better match i40e_construct_skb().
Fixes: 0a714186d3c0 ("i40e: add AF_XDP zero-copy Rx support")
Suggested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
{__,}napi_alloc_skb() allocates and reserves additional NET_SKB_PAD
+ NET_IP_ALIGN for any skb.
OTOH, i40e_construct_skb_zc() currently allocates and reserves
additional `xdp->data - xdp->data_hard_start`, which is
XDP_PACKET_HEADROOM for XSK frames.
There's no need for that at all as the frame is post-XDP and will
go only to the networking stack core.
Pass the size of the actual data only to __napi_alloc_skb() and
don't reserve anything. This will give enough headroom for stack
processing.
Fixes: 0a714186d3c0 ("i40e: add AF_XDP zero-copy Rx support")
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Running tests with a debug kernel shows that bnx2fc_recv_frame() is
modifying the per_cpu lport stats counters in a non-mpsafe way. Just boot
a debug kernel and run the bnx2fc driver with the hardware enabled.
[ 1391.699147] BUG: using smp_processor_id() in preemptible [00000000] code: bnx2fc_
[ 1391.699160] caller is bnx2fc_recv_frame+0xbf9/0x1760 [bnx2fc]
[ 1391.699174] CPU: 2 PID: 4355 Comm: bnx2fc_l2_threa Kdump: loaded Tainted: G B
[ 1391.699180] Hardware name: HP ProLiant DL120 G7, BIOS J01 07/01/2013
[ 1391.699183] Call Trace:
[ 1391.699188] dump_stack_lvl+0x57/0x7d
[ 1391.699198] check_preemption_disabled+0xc8/0xd0
[ 1391.699205] bnx2fc_recv_frame+0xbf9/0x1760 [bnx2fc]
[ 1391.699215] ? do_raw_spin_trylock+0xb5/0x180
[ 1391.699221] ? bnx2fc_npiv_create_vports.isra.0+0x4e0/0x4e0 [bnx2fc]
[ 1391.699229] ? bnx2fc_l2_rcv_thread+0xb7/0x3a0 [bnx2fc]
[ 1391.699240] bnx2fc_l2_rcv_thread+0x1af/0x3a0 [bnx2fc]
[ 1391.699250] ? bnx2fc_ulp_init+0xc0/0xc0 [bnx2fc]
[ 1391.699258] kthread+0x364/0x420
[ 1391.699263] ? _raw_spin_unlock_irq+0x24/0x50
[ 1391.699268] ? set_kthread_struct+0x100/0x100
[ 1391.699273] ret_from_fork+0x22/0x30
Restore the old get_cpu/put_cpu code with some modifications to reduce the
size of the critical section.
Link: https://lore.kernel.org/r/20220124145110.442335-1-jmeneghi@redhat.com
Fixes: d576a5e80cd0 ("bnx2fc: Improve stats update mechanism")
Tested-by: Guangwu Zhang <guazhang@redhat.com>
Acked-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Current code handles completions for SATA devices in mpi_sata_completion()
and mpi_sata_event().
However, at the time when any SATA event happens, for almost all the event
types, the command is still in the target. It is therefore incorrect to
complete the task in sata_event().
There are some events for which we get sata_completions, some need recovery
procedure and others abort. All the tasks must be completed via
sata_completion() path.
Removed the task done related code from sata_events(). For tasks where we
don't get completions, let top layer call abort() to abort the command post
timeout.
Link: https://lore.kernel.org/r/20220124082255.86223-1-Ajish.Koshy@microchip.com
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Co-developed-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Ajish Koshy <Ajish.Koshy@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
If lt9611_audio_init() fails, some resources still need to be released
before returning an error code.
Add the missing goto the error handling path.
Fixes: 23278bf54afe ("drm/bridge: Introduce LT9611 DSI to HDMI bridge")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/9c20eb74d42f6d4128e58e3e46aa320482472b77.1643468761.git.christophe.jaillet@wanadoo.fr
Reviewed-by: Robert Foss <robert.foss@linaro.org>
|
|
On non-OF enabled platforms (CONFIG_OF is not set), of_match_node() will
expand to NULL. The of_device_id array pointed by the macro will then be
left unused. Let's mark the array __maybe_unused in this case to prevent
compiler warnings.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/linux-mtd/20220127110802.1064963-1-miquel.raynal@bootlin.com
|
|
of_match_ptr() either expands to NULL if !CONFIG_OF, or is transparent
otherwise. There are several drivers using this macro which keep their
of_device_id array enclosed within an #ifdef CONFIG_OF check, these are
considered fine. However, When misused, the of_device_id array pointed
by this macro will produce a warning because it is finally unused when
compiled without OF support.
A number of fixes are possible:
- Always depend on CONFIG_OF, but this will not always work and may
break boards.
- Enclose the compatible array by #ifdef's, this may save a bit of
memory but will reduce build coverage.
- Tell the compiler the array may be unused, if this can be avoided,
let's not do this.
- Just drop the macro, setting the of_device_id array for a non OF
enabled platform is not an issue, it will just be unused.
The latter solution seems the more appropriate, so let's use it.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/linux-mtd/20220127110631.1064705-1-miquel.raynal@bootlin.com
|
|
The brcmnand driver contains a bug in which if a page (example 2k byte)
is read from the parallel/ONFI NAND and within that page a subpage (512
byte) has correctable errors which is followed by a subpage with
uncorrectable errors, the page read will return the wrong status of
correctable (as opposed to the actual status of uncorrectable.)
The bug is in function brcmnand_read_by_pio where there is a check for
uncorrectable bits which will be preempted if a previous status for
correctable bits is detected.
The fix is to stop checking for bad bits only if we already have a bad
bits status.
Fixes: 27c5b17cd1b1 ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller")
Signed-off-by: david regan <dregan@mail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/trinity-478e0c09-9134-40e8-8f8c-31c371225eda-1643237024774@3c-app-mailcom-lxa02
|
|
After commit e3beca48a45b ("irqdomain/treewide: Keep firmware node
unconditionally allocated"). For tear down scenario, fn is only freed
after fail to allocate ir_domain, though it also should be freed in case
dmar_enable_qi returns error.
Besides free fn, irq_domain and ir_msi_domain need to be removed as well
if intel_setup_irq_remapping fails to enable queued invalidation.
Improve the rewinding path by add out_free_ir_domain and out_free_fwnode
lables per Baolu's suggestion.
Fixes: e3beca48a45b ("irqdomain/treewide: Keep firmware node unconditionally allocated")
Suggested-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Link: https://lore.kernel.org/r/20220119063640.16864-1-guoqing.jiang@linux.dev
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20220128031002.2219155-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The code is mostly free of W=1 warning, so fix the following:
drivers/iommu/iommu.c:996: warning: expecting prototype for iommu_group_for_each_dev(). Prototype was for __iommu_group_for_each_dev() instead
drivers/iommu/iommu.c:3048: warning: Function parameter or member 'drvdata' not described in 'iommu_sva_bind_device'
drivers/iommu/ioasid.c:354: warning: Function parameter or member 'ioasid' not described in 'ioasid_get'
drivers/iommu/omap-iommu.c:1098: warning: expecting prototype for omap_iommu_suspend_prepare(). Prototype was for omap_iommu_prepare() instead
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/1643366673-26803-1-git-send-email-john.garry@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Don't populate the read-only array queue_id_to_wmm_aci on the stack
but instead make it static. Also makes the object code a little smaller.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220109230921.58766-1-colin.i.king@gmail.com
|
|
Use min_t() in order to make code cleaner.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20211222070815.483009-1-deng.changcheng@zte.com.cn
|
|
Ping-Ke Shih answered[1] a question for a user about an rtl8821ce device that
reported RFE 6, which the driver did not support. Ping-Ke suggested a possible
fix, but the user never reported back.
A second user discovered the above thread and tested the proposed fix.
Accordingly, I am pushing this change, even though I am not the author.
[1] https://lore.kernel.org/linux-wireless/3f5e2f6eac344316b5dd518ebfea2f95@realtek.com/
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Reported-and-tested-by: masterzorag <masterzorag@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220107024739.20967-1-Larry.Finger@lwfinger.net
|
|
Previously we allocated less memory than actual required, overwrite
to the buffer causes the mm module to complaint and raise access
violation faults. Along with potential memory leaks when returned
early. Fix these by passing the correct size and proper deinit flow.
Fixes: 10d162b2ed39 ("rtw88: 8822c: add ieee80211_ops::hw_scan")
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220121070813.9656-4-pkshih@realtek.com
|
|
Upon hw scan completion, idle mode is not re-entered. This might
increase power consumption under no link mode. Fix this by adding the
re-enter flow. We need another work for this since enter_ips waits
for c2h_work to finish, which might lead to deadlock if caller is in
the same work.
Fixes: 10d162b2ed39 ("rtw88: 8822c: add ieee80211_ops::hw_scan")
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220121070813.9656-3-pkshih@realtek.com
|
|
ieee80211_probereq_get() can return NULL. Pointer skb should be checked
for validty before use. If it is not valid, list of skbs needs to be
freed.
Fixes: 10d162b2ed39 ("rtw88: 8822c: add ieee80211_ops::hw_scan")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220121070813.9656-2-pkshih@realtek.com
|
|
Reuse the dropped page in RX path to save page allocation
overhead.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This counter will show up in ethtool stat. It is the
number of packets received and forwarded by XDP program.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This counter will show up in ethtool stat data.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Kasan has reported the following use after free on dev->iommu.
when a device probe fails and it is in process of freeing dev->iommu
in dev_iommu_free function, a deferred_probe_work_func runs in parallel
and tries to access dev->iommu->fwspec in of_iommu_configure path thus
causing use after free.
BUG: KASAN: use-after-free in of_iommu_configure+0xb4/0x4a4
Read of size 8 at addr ffffff87a2f1acb8 by task kworker/u16:2/153
Workqueue: events_unbound deferred_probe_work_func
Call trace:
dump_backtrace+0x0/0x33c
show_stack+0x18/0x24
dump_stack_lvl+0x16c/0x1e0
print_address_description+0x84/0x39c
__kasan_report+0x184/0x308
kasan_report+0x50/0x78
__asan_load8+0xc0/0xc4
of_iommu_configure+0xb4/0x4a4
of_dma_configure_id+0x2fc/0x4d4
platform_dma_configure+0x40/0x5c
really_probe+0x1b4/0xb74
driver_probe_device+0x11c/0x228
__device_attach_driver+0x14c/0x304
bus_for_each_drv+0x124/0x1b0
__device_attach+0x25c/0x334
device_initial_probe+0x24/0x34
bus_probe_device+0x78/0x134
deferred_probe_work_func+0x130/0x1a8
process_one_work+0x4c8/0x970
worker_thread+0x5c8/0xaec
kthread+0x1f8/0x220
ret_from_fork+0x10/0x18
Allocated by task 1:
____kasan_kmalloc+0xd4/0x114
__kasan_kmalloc+0x10/0x1c
kmem_cache_alloc_trace+0xe4/0x3d4
__iommu_probe_device+0x90/0x394
probe_iommu_group+0x70/0x9c
bus_for_each_dev+0x11c/0x19c
bus_iommu_probe+0xb8/0x7d4
bus_set_iommu+0xcc/0x13c
arm_smmu_bus_init+0x44/0x130 [arm_smmu]
arm_smmu_device_probe+0xb88/0xc54 [arm_smmu]
platform_drv_probe+0xe4/0x13c
really_probe+0x2c8/0xb74
driver_probe_device+0x11c/0x228
device_driver_attach+0xf0/0x16c
__driver_attach+0x80/0x320
bus_for_each_dev+0x11c/0x19c
driver_attach+0x38/0x48
bus_add_driver+0x1dc/0x3a4
driver_register+0x18c/0x244
__platform_driver_register+0x88/0x9c
init_module+0x64/0xff4 [arm_smmu]
do_one_initcall+0x17c/0x2f0
do_init_module+0xe8/0x378
load_module+0x3f80/0x4a40
__se_sys_finit_module+0x1a0/0x1e4
__arm64_sys_finit_module+0x44/0x58
el0_svc_common+0x100/0x264
do_el0_svc+0x38/0xa4
el0_svc+0x20/0x30
el0_sync_handler+0x68/0xac
el0_sync+0x160/0x180
Freed by task 1:
kasan_set_track+0x4c/0x84
kasan_set_free_info+0x28/0x4c
____kasan_slab_free+0x120/0x15c
__kasan_slab_free+0x18/0x28
slab_free_freelist_hook+0x204/0x2fc
kfree+0xfc/0x3a4
__iommu_probe_device+0x284/0x394
probe_iommu_group+0x70/0x9c
bus_for_each_dev+0x11c/0x19c
bus_iommu_probe+0xb8/0x7d4
bus_set_iommu+0xcc/0x13c
arm_smmu_bus_init+0x44/0x130 [arm_smmu]
arm_smmu_device_probe+0xb88/0xc54 [arm_smmu]
platform_drv_probe+0xe4/0x13c
really_probe+0x2c8/0xb74
driver_probe_device+0x11c/0x228
device_driver_attach+0xf0/0x16c
__driver_attach+0x80/0x320
bus_for_each_dev+0x11c/0x19c
driver_attach+0x38/0x48
bus_add_driver+0x1dc/0x3a4
driver_register+0x18c/0x244
__platform_driver_register+0x88/0x9c
init_module+0x64/0xff4 [arm_smmu]
do_one_initcall+0x17c/0x2f0
do_init_module+0xe8/0x378
load_module+0x3f80/0x4a40
__se_sys_finit_module+0x1a0/0x1e4
__arm64_sys_finit_module+0x44/0x58
el0_svc_common+0x100/0x264
do_el0_svc+0x38/0xa4
el0_svc+0x20/0x30
el0_sync_handler+0x68/0xac
el0_sync+0x160/0x180
Fix this by setting dev->iommu to NULL first and
then freeing dev_iommu structure in dev_iommu_free
function.
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Vijayanand Jitta <quic_vjitta@quicinc.com>
Link: https://lore.kernel.org/r/1643613155-20215-1-git-send-email-quic_vjitta@quicinc.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
pm_runtime_get_sync() will increase the rumtime PM counter
even when it returns an error. Thus a pairing decrement is needed
to prevent refcount leak. Fix this by replacing this API with
pm_runtime_resume_and_get(), which will not change the runtime
PM counter on error. Besides, a matching decrement is needed
on the error handling path to keep the counter balanced.
Signed-off-by: Yongzhi Liu <lyz_cs@pku.edu.cn>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1643008835-73961-1-git-send-email-lyz_cs@pku.edu.cn
|
|
In some case, like after a transfer timeout, master->cur_msg pointer
is NULL which led to a kernel crash when trying to use master->cur_msg->spi.
mtk_spi_can_dma(), pointed by master->can_dma, doesn't use this parameter
avoid the problem by setting NULL as second parameter.
Fixes: a568231f46322 ("spi: mediatek: Add spi bus for Mediatek MT8173")
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Link: https://lore.kernel.org/r/20220131141708.888710-1-benjamin.gaignard@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fix compiler warming for kernel test
Fixes: f62ca4e2a863 ("spi: Add spi driver for Sunplus SP7021")
Signed-off-by: Li-hao Kuo <lhjeff911@gmail.com>
Link: https://lore.kernel.org/r/CAGcXWkzM6wbhNFLbYoijq7iS_76nYVod1ySFEDu-BRgnBokEQA@mail.gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The driver already relies on the core looking up GPIO lines
from the core, so this is trivial to switch over to using
GPIO descriptors.
Cc: Purna Chandra Mandal <purna.mandal@microchip.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220122004846.374930-1-linus.walleij@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This driver is already relying on the core to provide
valid GPIO numbers in spi->cs_gpio through
of_spi_get_gpio_numbers(), so we can switch to letting
the core use GPIO descriptors instead.
The driver was assigning a local function to the custom
chipselect callback, but I chose to just open code the
gpiod setting instead, this is easier to read.
The only platform that overrides the cs_control callback
is the mpc832x_rdb.
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220120002600.216667-1-linus.walleij@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The MT65xx driver was already relying on the core to get some
GPIO line numbers so it can be (hopefully) trivially converted
to use descriptors instead.
Cc: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Cc: Mason Zhang <Mason.Zhang@mediatek.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Peter Hess <peter.hess@ph-home.de>
Cc: Leilk Liu <leilk.liu@mediatek.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220122003302.374304-1-linus.walleij@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This converts the PXA2xx SPI driver to use GPIO descriptors
exclusively to retrieve GPIO chip select lines.
The device tree and ACPI paths of the driver already use
descriptors, hence ->use_gpio_descriptors is already set and
this codepath is well tested.
Convert all the PXA boards providing chip select GPIOs as
platform data and drop the old GPIO chipselect handling in
favor of the core managing it exclusively.
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: linux-arm-kernel@lists.infradead.org
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220125005836.494807-1-linus.walleij@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
It was reported that the mmc host structure could be accessed after it
was freed in moxart_remove(), so fix this by saving the base register of
the device and using it instead of the pointer dereference.
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Cc: Xin Xiong <xiongx18@fudan.edu.cn>
Cc: Xin Tan <tanxin.ctf@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: linux-mmc@vger.kernel.org
Cc: stable <stable@vger.kernel.org>
Reported-by: whitehat002 <hackyzh002@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220127071638.4057899-1-gregkh@linuxfoundation.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The text of various warning messages triggered by unittest has
changed. Update the text of expected warnings to match.
The expected vs actual warnings are most easily seen by filtering
the boot console messages with the of_unittest_expect program at
https://github.com/frowand/dt_tools.git. The filter prefixes
problem lines with '***', and prefixes lines that match expected
errors with 'ok '. All other lines are prefixed with ' '.
Unrelated lines have been deleted in the following examples.
The mismatch appears as:
-> ### dt-test ### start of unittest - you will see error messages
OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1
** of_unittest_expect WARNING - not found ---> OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found -1
OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1
** of_unittest_expect WARNING - not found ---> OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found -1
OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found 1
** of_unittest_expect WARNING - not found ---> OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found -1
platform testcase-data:testcase-device2: error -ENXIO: IRQ index 0 not found
** of_unittest_expect WARNING - not found ---> platform testcase-data:testcase-device2: IRQ index 0 not found
-> ### dt-test ### end of unittest - 254 passed, 0 failed
** EXPECT statistics:
**
** EXPECT found : 42
** EXPECT not found : 4
With this commit applied, the mismatch is resolved:
-> ### dt-test ### start of unittest - you will see error messages
ok OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1
ok OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1
ok OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found 1
ok platform testcase-data:testcase-device2: error -ENXIO: IRQ index 0 not found
-> ### dt-test ### end of unittest - 254 passed, 0 failed
** EXPECT statistics:
**
** EXPECT found : 46
** EXPECT not found : 0
Fixes: 2043727c2882 ("driver core: platform: Make use of the helper function dev_err_probe()")
Fixes: 94a4950a4acf ("of: base: Fix phandle argument length mismatch error message")
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220127192643.2534941-1-frowand.list@gmail.com
|
|
In mac80211_hwsim, the probe_req frame is created and sent while
scanning. It is sent with ieee80211_tx_info which is not initialized.
Uninitialized ieee80211_tx_info can cause problems when using
mac80211_hwsim with wmediumd. wmediumd checks the tx_rates field of
ieee80211_tx_info and doesn't relay probe_req frame to other clients
even if it is a broadcasting message.
Call ieee80211_tx_prepare_skb() to initialize ieee80211_tx_info for
the probe_req that is created by hw_scan_work in mac80211_hwsim.
Signed-off-by: JaeMan Park <jaeman@google.com>
Link: https://lore.kernel.org/r/20220113060235.546107-1-jaeman@google.com
[fix memory leak]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add IEEE80211_TX_STAT_NOACK_TRANSMITTED to tx_status flags to have proper
statistics for non-acked frames.
Signed-off-by: Benjamin Beichler <benjamin.beichler@uni-rostock.de>
Link: https://lore.kernel.org/r/20220111221327.1499881-1-benjamin.beichler@uni-rostock.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently tx_params is being re-assigned with a new value and the
previous setting IEEE80211_HT_MCS_TX_RX_DIFF is being overwritten.
The assignment operator is incorrect, the original intent was to
bit-wise or the value in. Fix this by replacing the = operator
with |= instead.
Kudos to Christian Lamparter for suggesting the correct fix.
Fixes: fe8ee9ad80b2 ("carl9170: mac80211 glue and command interface")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Cc: <Stable@vger.kernel.org>
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220125004406.344422-1-colin.i.king@gmail.com
|
|
The spread of capability between the three WiFi silicon parts wcn36xx
supports is:
wcn3620 - 802.11 a/b/g
wcn3660 - 802.11 a/b/g/n
wcn3680 - 802.11 a/b/g/n/ac
We currently treat wcn3660 as wcn3620 thus limiting it to 2GHz channels.
Fix this regression by ensuring we differentiate between all three parts.
Fixes: 8490987bdb9a ("wcn36xx: Hook and identify RF_IRIS_WCN3680")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220125004046.4058284-1-bryan.odonoghue@linaro.org
|
|
If amss.bin was missing ath11k would crash during 'rmmod ath11k_pci'. The
reason for that was that we were using mhi_async_power_up() which does not
check any errors. But mhi_sync_power_up() on the other hand does check for
errors so let's use that to fix the crash.
I was not able to find a reason why an async version was used.
ath11k_mhi_start() (which enables state ATH11K_MHI_POWER_ON) is called from
ath11k_hif_power_up(), which can sleep. So sync version should be safe to use
here.
[ 145.569731] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN PTI
[ 145.569789] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
[ 145.569843] CPU: 2 PID: 1628 Comm: rmmod Kdump: loaded Tainted: G W 5.16.0-wt-ath+ #567
[ 145.569898] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0067.2021.0528.1339 05/28/2021
[ 145.569956] RIP: 0010:ath11k_hal_srng_access_begin+0xb5/0x2b0 [ath11k]
[ 145.570028] Code: df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 ec 01 00 00 48 8b ab a8 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 ea 48 c1 ea 03 <0f> b6 14 02 48 89 e8 83 e0 07 83 c0 03 45 85 ed 75 48 38 d0 7c 08
[ 145.570089] RSP: 0018:ffffc900025d7ac0 EFLAGS: 00010246
[ 145.570144] RAX: dffffc0000000000 RBX: ffff88814fca2dd8 RCX: 1ffffffff50cb455
[ 145.570196] RDX: 0000000000000000 RSI: ffff88814fca2dd8 RDI: ffff88814fca2e80
[ 145.570252] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffffffa8659497
[ 145.570329] R10: fffffbfff50cb292 R11: 0000000000000001 R12: ffff88814fca0000
[ 145.570410] R13: 0000000000000000 R14: ffff88814fca2798 R15: ffff88814fca2dd8
[ 145.570465] FS: 00007fa399988540(0000) GS:ffff888233e00000(0000) knlGS:0000000000000000
[ 145.570519] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 145.570571] CR2: 00007fa399b51421 CR3: 0000000137898002 CR4: 00000000003706e0
[ 145.570623] Call Trace:
[ 145.570675] <TASK>
[ 145.570727] ? ath11k_ce_tx_process_cb+0x34b/0x860 [ath11k]
[ 145.570797] ath11k_ce_tx_process_cb+0x356/0x860 [ath11k]
[ 145.570864] ? tasklet_init+0x150/0x150
[ 145.570919] ? ath11k_ce_alloc_pipes+0x280/0x280 [ath11k]
[ 145.570986] ? tasklet_clear_sched+0x42/0xe0
[ 145.571042] ? tasklet_kill+0xe9/0x1b0
[ 145.571095] ? tasklet_clear_sched+0xe0/0xe0
[ 145.571148] ? irq_has_action+0x120/0x120
[ 145.571202] ath11k_ce_cleanup_pipes+0x45a/0x580 [ath11k]
[ 145.571270] ? ath11k_pci_stop+0x10e/0x170 [ath11k_pci]
[ 145.571345] ath11k_core_stop+0x8a/0xc0 [ath11k]
[ 145.571434] ath11k_core_deinit+0x9e/0x150 [ath11k]
[ 145.571499] ath11k_pci_remove+0xd2/0x260 [ath11k_pci]
[ 145.571553] pci_device_remove+0x9a/0x1c0
[ 145.571605] __device_release_driver+0x332/0x660
[ 145.571659] driver_detach+0x1e7/0x2c0
[ 145.571712] bus_remove_driver+0xe2/0x2d0
[ 145.571772] pci_unregister_driver+0x21/0x250
[ 145.571826] __do_sys_delete_module+0x30a/0x4b0
[ 145.571879] ? free_module+0xac0/0xac0
[ 145.571933] ? lockdep_hardirqs_on_prepare.part.0+0x18c/0x370
[ 145.571986] ? syscall_enter_from_user_mode+0x1d/0x50
[ 145.572039] ? lockdep_hardirqs_on+0x79/0x100
[ 145.572097] do_syscall_64+0x3b/0x90
[ 145.572153] entry_SYSCALL_64_after_hwframe+0x44/0xae
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220127090117.2024-2-kvalo@kernel.org
|
|
Mario reported that the kernel was crashing on suspend if ath11k was not able
to find a board file:
[ 473.693286] PM: Suspending system (s2idle)
[ 473.693291] printk: Suspending console(s) (use no_console_suspend to debug)
[ 474.407787] BUG: unable to handle page fault for address: 0000000000002070
[ 474.407791] #PF: supervisor read access in kernel mode
[ 474.407794] #PF: error_code(0x0000) - not-present page
[ 474.407798] PGD 0 P4D 0
[ 474.407801] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ 474.407805] CPU: 2 PID: 2350 Comm: kworker/u32:14 Tainted: G W 5.16.0 #248
[...]
[ 474.407868] Call Trace:
[ 474.407870] <TASK>
[ 474.407874] ? _raw_spin_lock_irqsave+0x2a/0x60
[ 474.407882] ? lock_timer_base+0x72/0xa0
[ 474.407889] ? _raw_spin_unlock_irqrestore+0x29/0x3d
[ 474.407892] ? try_to_del_timer_sync+0x54/0x80
[ 474.407896] ath11k_dp_rx_pktlog_stop+0x49/0xc0 [ath11k]
[ 474.407912] ath11k_core_suspend+0x34/0x130 [ath11k]
[ 474.407923] ath11k_pci_pm_suspend+0x1b/0x50 [ath11k_pci]
[ 474.407928] pci_pm_suspend+0x7e/0x170
[ 474.407935] ? pci_pm_freeze+0xc0/0xc0
[ 474.407939] dpm_run_callback+0x4e/0x150
[ 474.407947] __device_suspend+0x148/0x4c0
[ 474.407951] async_suspend+0x20/0x90
dmesg-efi-164255130401001:
Oops#1 Part1
[ 474.407955] async_run_entry_fn+0x33/0x120
[ 474.407959] process_one_work+0x220/0x3f0
[ 474.407966] worker_thread+0x4a/0x3d0
[ 474.407971] kthread+0x17a/0x1a0
[ 474.407975] ? process_one_work+0x3f0/0x3f0
[ 474.407979] ? set_kthread_struct+0x40/0x40
[ 474.407983] ret_from_fork+0x22/0x30
[ 474.407991] </TASK>
The issue here is that board file loading happens after ath11k_pci_probe()
succesfully returns (ath11k initialisation happends asynchronously) and the
suspend handler is still enabled, of course failing as ath11k is not properly
initialised. Fix this by checking ATH11K_FLAG_QMI_FAIL during both suspend and
resume.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2
Reported-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215504
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220127090117.2024-1-kvalo@kernel.org
|
|
rx_desc_get_ldpc_support is missing in wcn6855_ops, resulting on WCN6855 a
kernel crash after connecting to an AP and waiting for few minutes. Fix it by
implementing WCN6855's version of this field and adding it to wcn6855_ops.
Crash stack:
[ 184.862605] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 184.862615] #PF: supervisor instruction fetch in kernel mode
[ 184.862620] #PF: error_code(0x0010) - not-present page
[ 184.862626] PGD 0 P4D 0
[ 184.862634] Oops: 0010 [#1] PREEMPT SMP PTI
[ 184.862642] CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Not tainted 5.16.0-wt-ath+ #1
[ 184.862651] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0059.2019.1112.1124 11/12/2019
[ 184.862656] RIP: 0010:0x0
[ 184.862669] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.
[ 184.862673] RSP: 0018:ffff9eedc003cca8 EFLAGS: 00010202
[ 184.862680] RAX: 0000000000000000 RBX: ffff9eedc003cd30 RCX: 0000000000000002
[ 184.862686] RDX: 0000000000000002 RSI: ffffffffc1773458 RDI: ffff8eb5843de240
[ 184.862692] RBP: ffff8eb59685a0e0 R08: 0000000000000001 R09: ffff8eb6fef2b000
[ 184.862700] R10: ffff9eedc003cd70 R11: ffff8eb5880a9ff0 R12: ffff8eb5843de240
[ 184.862707] R13: 0000000000000000 R14: 0000000000000008 R15: 0000000000000003
[ 184.862714] FS: 0000000000000000(0000) GS:ffff8eb6f6c40000(0000) knlGS:0000000000000000
[ 184.862723] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 184.862733] CR2: ffffffffffffffd6 CR3: 000000002f60a001 CR4: 00000000003706e0
[ 184.862743] Call Trace:
[ 184.862751] <IRQ>
[ 184.862759] ath11k_dp_rx_h_ppdu+0x210/0x350 [ath11k]
[ 184.862841] ath11k_dp_rx_process_received_packets+0x1e6/0x6b0 [ath11k]
[ 184.862891] ath11k_dp_process_rx+0x32d/0x3e0 [ath11k]
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Fixes: b3febdccde3e ("ath11k: add LDPC FEC type in 802.11 radiotap header")
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220126010144.2090-1-quic_bqiang@quicinc.com
|
|
Add missing else statement in ath11k_dp_rx_process_mon_status()
to fix below smatch warnings,
drivers/net/wireless/ath/ath11k/dp_rx.c:3105
ath11k_dp_rx_process_mon_status()
error: uninitialized symbol 'rx_buf_sz'.
Fixes: ab18e3bc1c13 ("ath11k: Fix pktlog lite rx events")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Anilkumar Kolli <quic_akolli@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/1642605793-13518-1-git-send-email-quic_akolli@quicinc.com
|
|
Call netif_napi_del() from ath11k_ahb_free_ext_irq() to fix
the following kernel panic when unload/load ath11k modules
for few iterations.
[ 971.201365] Unable to handle kernel paging request at virtual address 6d97a208
[ 971.204227] pgd = 594c2919
[ 971.211478] [6d97a208] *pgd=00000000
[ 971.214120] Internal error: Oops: 5 [#1] PREEMPT SMP ARM
[ 971.412024] CPU: 2 PID: 4435 Comm: insmod Not tainted 5.4.89 #0
[ 971.434256] Hardware name: Generic DT based system
[ 971.440165] PC is at napi_by_id+0x10/0x40
[ 971.445019] LR is at netif_napi_add+0x160/0x1dc
[ 971.743127] (napi_by_id) from [<807d89a0>] (netif_napi_add+0x160/0x1dc)
[ 971.751295] (netif_napi_add) from [<7f1209ac>] (ath11k_ahb_config_irq+0xf8/0x414 [ath11k_ahb])
[ 971.759164] (ath11k_ahb_config_irq [ath11k_ahb]) from [<7f12135c>] (ath11k_ahb_probe+0x40c/0x51c [ath11k_ahb])
[ 971.768567] (ath11k_ahb_probe [ath11k_ahb]) from [<80666864>] (platform_drv_probe+0x48/0x94)
[ 971.779670] (platform_drv_probe) from [<80664718>] (really_probe+0x1c8/0x450)
[ 971.789389] (really_probe) from [<80664cc4>] (driver_probe_device+0x15c/0x1b8)
[ 971.797547] (driver_probe_device) from [<80664f60>] (device_driver_attach+0x44/0x60)
[ 971.805795] (device_driver_attach) from [<806650a0>] (__driver_attach+0x124/0x140)
[ 971.814822] (__driver_attach) from [<80662adc>] (bus_for_each_dev+0x58/0xa4)
[ 971.823328] (bus_for_each_dev) from [<80663a2c>] (bus_add_driver+0xf0/0x1e8)
[ 971.831662] (bus_add_driver) from [<806658a4>] (driver_register+0xa8/0xf0)
[ 971.839822] (driver_register) from [<8030269c>] (do_one_initcall+0x78/0x1ac)
[ 971.847638] (do_one_initcall) from [<80392524>] (do_init_module+0x54/0x200)
[ 971.855968] (do_init_module) from [<803945b0>] (load_module+0x1e30/0x1ffc)
[ 971.864126] (load_module) from [<803948b0>] (sys_init_module+0x134/0x17c)
[ 971.871852] (sys_init_module) from [<80301000>] (ret_fast_syscall+0x0/0x50)
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.6.0.1-00760-QCAHKSWPL_SILICONZ-1
Signed-off-by: Venkateswara Naralasetty <quic_vnaralas@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/1642583973-21599-1-git-send-email-quic_vnaralas@quicinc.com
|
|
Rename ath11k_ahb_ext_irq_config() to ath11k_ahb_config_ext_irq()
for just symmetry with ath11k_ahb_free_ext_irq().
Signed-off-by: Venkateswara Naralasetty <quic_vnaralas@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/1642583893-21485-1-git-send-email-quic_vnaralas@quicinc.com
|
|
Remove most references to 'master' in the code and replace them with
some form of 'aggregate device'. This better reflects the reality of
what this code does, i.e. an aggregate device that represents a
device like a GPU card once some set of devices that make up the
aggregate device probe and register with the component framework.
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Saravana Kannan <saravanak@google.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20220127200141.1295328-2-swboyd@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The poll man page says POLLRDNORM is equivalent to POLLIN when used as
an event.
$ man poll
<snip>
POLLRDNORM
Equivalent to POLLIN.
However, in n_tty driver, POLLRDNORM does not return until timeout even
if there is terminal input, whereas POLLIN returns.
The following test program works until kernel-3.17, but the test stops
in poll() after commit 57087d515441 ("tty: Fix spurious poll() wakeups").
[Steps to run test program]
$ cc -o test-pollrdnorm test-pollrdnorm.c
$ ./test-pollrdnorm
foo <-- Type in something from the terminal followed by [RET].
The string should be echoed back.
------------------------< test-pollrdnorm.c >------------------------
#include <stdio.h>
#include <errno.h>
#include <poll.h>
#include <unistd.h>
void main(void)
{
int n;
unsigned char buf[8];
struct pollfd fds[1] = {{ 0, POLLRDNORM, 0 }};
n = poll(fds, 1, -1);
if (n < 0)
perror("poll");
n = read(0, buf, 8);
if (n < 0)
perror("read");
if (n > 0)
write(1, buf, n);
}
------------------------------------------------------------------------
The attached patch fixes this problem. Many calls to
wake_up_interruptible_poll() in the kernel source code already specify
"POLLIN | POLLRDNORM".
Fixes: 57087d515441 ("tty: Fix spurious poll() wakeups")
Cc: stable@vger.kernel.org
Signed-off-by: Kosuke Tatsukawa <tatsu-ab1@nec.com>
Link: https://lore.kernel.org/r/TYCPR01MB81901C0F932203D30E452B3EA5209@TYCPR01MB8190.jpnprd01.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In the similar way how it's done in 8250_pericom, derive the number of
the UART ports from PCI ID for Acces I/O cards.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220127180608.71509-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace acpi_bus_get_device() that is going to be dropped with
acpi_fetch_acpi_dev().
No intentional functional impact.
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/7355105.EvYhyI6sBW@kreacher
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add speed names for better clarity of dgb/warn messages from max packet
size/bInterval checks.
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Link: https://lore.kernel.org/r/20220127114331.41367-5-pavel.hofman@ivitera.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Allow setting configfs params p_hs_bint/c_hs_bint to 0. If they are set
to 0, determine the largest bInterval (4 to 1) for which the required
bandwidth of the max samplerate fits the max allowed packet size. If the
required bandwidth exceeds max bandwidth for single-packet mode
(ep->mc=1), keep bInterval at 1.
The FS speed is left at fixed bInterval=1.
If for any speed the required bandwidth exceeds the max bandwidth
corresponding to the selected/determined bInterval, print a warning.
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Link: https://lore.kernel.org/r/20220127114331.41367-4-pavel.hofman@ivitera.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Allow configuring the existing f_uac2 configfs bInterval params through
parameters of the gaudio module.
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Link: https://lore.kernel.org/r/20220127114331.41367-3-pavel.hofman@ivitera.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Allow configuring the HS/SS bInterval through configfs, via
parameters p_hs_bint/c_hs_bint separately for playback/capture.
The default param values are left at the original 4.
Suggested-by: John Keeping <john@metanate.com>
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Link: https://lore.kernel.org/r/20220127114331.41367-2-pavel.hofman@ivitera.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace disbale with disable
Signed-off-by: tangmeng <tangmeng@uniontech.com>
Link: https://lore.kernel.org/r/20220127071619.31812-1-tangmeng@uniontech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace acpi_bus_get_device() that is going to be dropped with
acpi_fetch_acpi_dev().
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/1899393.PYKUYFuaPT@kreacher
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Several users have reported that their Win10 does not enumerate UAC2
gadget with the existing wTerminalType set to
UAC_INPUT_TERMINAL_UNDEFINED/UAC_INPUT_TERMINAL_UNDEFINED, e.g.
https://github.com/raspberrypi/linux/issues/4587#issuecomment-926567213.
While the constant is officially defined by the USB terminal types
document, e.g. XMOS firmware for UAC2 (commonly used for Win10) defines
no undefined output terminal type in its usbaudio20.h header.
Therefore wTerminalType of EP-IN is set to
UAC_INPUT_TERMINAL_MICROPHONE and wTerminalType of EP-OUT to
UAC_OUTPUT_TERMINAL_SPEAKER for the UAC2 gadget.
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220131071813.7433-1-pavel.hofman@ivitera.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
Alexander Lobakin
John Meneghini
Ajish Koshy
Christophe JAILLET
Miquel Raynal
david regan
Guoqing Jiang
John Garry
Colin Ian King
Changcheng Deng
Ping-Ke Shih
Po-Hao Huang
Muhammad Usama Anjum
Haiyang Zhang
Vijayanand Jitta
Yongzhi Liu
Benjamin Gaignard
郭力豪
Linus Walleij
Greg Kroah-Hartman
Frank Rowand
JaeMan Park
Benjamin Beichler
Bryan O'Donoghue
Kalle Valo
Baochen Qiang
Anilkumar Kolli
Venkateswara Naralasetty
Stephen Boyd
TATSUKAWA KOSUKE (立川 江介)
Andy Shevchenko
Rafael J. Wysocki
Pavel Hofman
tangmeng