| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
'ftdi' is alloced when probe device, but not free on device disconnect,
this cause a memory leak as follows:
unreferenced object 0xffff88800d584000 (size 8400):
comm "kworker/0:2", pid 3809, jiffies 4295453055 (age 13.784s)
hex dump (first 32 bytes):
00 40 58 0d 80 88 ff ff 00 40 58 0d 80 88 ff ff .@X......@X.....
00 00 00 00 00 00 00 00 00 00 00 00 ad 4e ad de .............N..
backtrace:
[<000000000d47f947>] kmalloc_order_trace+0x19/0x110 mm/slab_common.c:960
[<000000008548ac68>] ftdi_elan_probe+0x8c/0x880 drivers/usb/misc/ftdi-elan.c:2647
[<000000007f73e422>] usb_probe_interface+0x31b/0x800 drivers/usb/core/driver.c:396
[<00000000fe8d07fc>] really_probe+0x299/0xc30 drivers/base/dd.c:517
[<0000000005da7d32>] __driver_probe_device+0x357/0x500 drivers/base/dd.c:751
[<000000003c2c9579>] driver_probe_device+0x4e/0x140 drivers/base/dd.c:781
Fix it by freeing 'ftdi' after nobody use it.
Fixes: a5c66e4b2418 ("USB: ftdi-elan: client driver for ELAN Uxxx adapters")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20211217083428.2441-1-weiyongjun1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When a new USB device gets plugged to nested hubs, the affected hub,
which connects to usb 2-1.4-port2, doesn't report there's any change,
hence the nested hubs go back to runtime suspend like nothing happened:
[ 281.032951] usb usb2: usb wakeup-resume
[ 281.032959] usb usb2: usb auto-resume
[ 281.032974] hub 2-0:1.0: hub_resume
[ 281.033011] usb usb2-port1: status 0263 change 0000
[ 281.033077] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 281.049797] usb 2-1: usb wakeup-resume
[ 281.069800] usb 2-1: Waited 0ms for CONNECT
[ 281.069810] usb 2-1: finish resume
[ 281.070026] hub 2-1:1.0: hub_resume
[ 281.070250] usb 2-1-port4: status 0203 change 0000
[ 281.070272] usb usb2-port1: resume, status 0
[ 281.070282] hub 2-1:1.0: state 7 ports 4 chg 0010 evt 0000
[ 281.089813] usb 2-1.4: usb wakeup-resume
[ 281.109792] usb 2-1.4: Waited 0ms for CONNECT
[ 281.109801] usb 2-1.4: finish resume
[ 281.109991] hub 2-1.4:1.0: hub_resume
[ 281.110147] usb 2-1.4-port2: status 0263 change 0000
[ 281.110234] usb 2-1-port4: resume, status 0
[ 281.110239] usb 2-1-port4: status 0203, change 0000, 10.0 Gb/s
[ 281.110266] hub 2-1.4:1.0: state 7 ports 4 chg 0000 evt 0000
[ 281.110426] hub 2-1.4:1.0: hub_suspend
[ 281.110565] usb 2-1.4: usb auto-suspend, wakeup 1
[ 281.130998] hub 2-1:1.0: hub_suspend
[ 281.137788] usb 2-1: usb auto-suspend, wakeup 1
[ 281.142935] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 281.177828] usb 2-1: usb wakeup-resume
[ 281.197839] usb 2-1: Waited 0ms for CONNECT
[ 281.197850] usb 2-1: finish resume
[ 281.197984] hub 2-1:1.0: hub_resume
[ 281.198203] usb 2-1-port4: status 0203 change 0000
[ 281.198228] usb usb2-port1: resume, status 0
[ 281.198237] hub 2-1:1.0: state 7 ports 4 chg 0010 evt 0000
[ 281.217835] usb 2-1.4: usb wakeup-resume
[ 281.237834] usb 2-1.4: Waited 0ms for CONNECT
[ 281.237845] usb 2-1.4: finish resume
[ 281.237990] hub 2-1.4:1.0: hub_resume
[ 281.238067] usb 2-1.4-port2: status 0263 change 0000
[ 281.238148] usb 2-1-port4: resume, status 0
[ 281.238152] usb 2-1-port4: status 0203, change 0000, 10.0 Gb/s
[ 281.238166] hub 2-1.4:1.0: state 7 ports 4 chg 0000 evt 0000
[ 281.238385] hub 2-1.4:1.0: hub_suspend
[ 281.238523] usb 2-1.4: usb auto-suspend, wakeup 1
[ 281.258076] hub 2-1:1.0: hub_suspend
[ 281.265744] usb 2-1: usb auto-suspend, wakeup 1
[ 281.285976] hub 2-0:1.0: hub_suspend
[ 281.285988] usb usb2: bus auto-suspend, wakeup 1
USB 3.2 spec, 9.2.5.4 "Changing Function Suspend State" says that "If
the link is in a non-U0 state, then the device must transition the link
to U0 prior to sending the remote wake message", but the hub only
transits the link to U0 after signaling remote wakeup.
So be more forgiving and use a 20ms delay to let the link transit to U0
for remote wakeup.
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20211215120108.336597-1-kai.heng.feng@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Override enable bits may not be restored when going to low power mode
(e.g. when in DWC2_POWER_DOWN_PARAM_NONE).
These bits are set when probing/initializing drd (role switch). Restore
them upon resume from low power mode (in case these have been lost).
To achieve this, the last known role is restored upon resume. And the
override enable bits are always set when configuring aval, bval and vbval.
When resuming, forcing the role should be done only once, or this can cause
port changes in HOST mode for instance.
So, only restore FORCEDEVMODE/FORCEHOSTMODE when role_sw is unused
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/1638806203-6624-4-git-send-email-fabrice.gasnier@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When using usb-role-switch, while the usb role is not yet define
(USB_ROLE_NONE), the user may want to configure the default mode to host
or device.
Use role-switch-default-mode for that purpose.
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/1638806203-6624-3-git-send-email-fabrice.gasnier@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The ChipIdea glue drivers just copy the glue resources to the "ci_hdrc"
child device. Instead, set the child device's DT node pointer to the
parent device's node so that platform_get_irq() can find the IRQ
resources in the DT. This removes the need for statically populating the
IRQ resources from the DT which has been deprecated for some time.
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211215225646.1997946-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Accessing platform device resources directly has long been deprecated for
DT as IRQ resources may not be available at device creation time. Drivers
continuing to use static IRQ resources is blocking removing the static setup
from the DT core code.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211215225203.1991003-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Accessing platform device resources directly has long been deprecated for
DT as IRQ resources may not be available at device creation time. Drivers
relying on the static IRQ resources is blocking removing the static setup
from the DT core code.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211215225358.1993774-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The memory resource is already retrieved with platform_get_resource(), so
let's use it instead of assuming it is the first resource in the array.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211215225509.1995417-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The min and max frequency QoS requests in the cpufreq core are
initialized to whatever the current min and max frequency values are
at the init time, but if any of these values change later (for
example, cpuinfo.max_freq is updated by the driver), these initial
request values will be limiting the CPU frequency unnecessarily
unless they are changed by user space via sysfs.
To address this, initialize min_freq_req and max_freq_req to
FREQ_QOS_MIN_DEFAULT_VALUE and FREQ_QOS_MAX_DEFAULT_VALUE,
respectively, so they don't really limit anything until user
space updates them.
Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
There is an expectation from users that they can get frequency specified
by cpufreq/cpuinfo_max_freq when conditions permit. But with AlderLake
mobile it may not be possible. This is possible that frequency is clipped
based on the system power-up EPP value. In this case users can update
cpufreq/energy_performance_preference to some performance oriented EPP to
limit clipping of frequencies.
To get out of box behavior as the prior generations of CPUs, update EPP
for AlderLake mobile CPUs on boot. On prior generations of CPUs EPP = 128
was enough to get maximum frequency, but with AlderLake mobile the
equivalent EPP is 102. Since EPP is model specific, this is possible that
they have different meaning on each generation of CPU.
The current EPP string "balance_performance" corresponds to EPP = 128.
Change the EPP corresponding to "balance_performance" to 102 for only
AlderLake mobile CPUs and update this on each CPU during boot.
To implement reuse epp_values[] array and update the modified EPP at the
index for BALANCE_PERFORMANCE. Add a dummy EPP_INDEX_DEFAULT to
epp_values[] to match indexes in the energy_perf_strings[].
After HWP PM is enabled also update EPP when "balance_performance" is
redefined for the very first time after the boot on each CPU. On
subsequent suspend/resume or offline/online the old EPP is restored,
so no specific action is needed.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
vmw_user_bo_lookup can fail to lookup user buffers, especially because
the buffer handles come from the userspace. The return value has
to be checked before the buffers are put back.
This was spotted by Dan's Smatch statick checker:
drivers/gpu/drm/vmwgfx/vmwgfx_bo.c:574 vmw_user_bo_synccpu_release()
error: uninitialized symbol 'vmw_bo'.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 8afa13a0583f ("drm/vmwgfx: Implement DRIVER_GEM")
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211215200224.3693345-1-zack@kde.org
(cherry picked from commit 60c9ecd705be3a28f79d70ea21c3939db668bf46)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
Before the driver had screen targets support we had to disable explicit
bringup of its infrastructure because it was breaking screen objects
support.
Since the implementation of screen targets landed there hasn't been a
reason to explicitly disable it and the options were never used.
Remove of all that unused code.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Fixes: d80efd5cb3de ("drm/vmwgfx: Initial DX support")
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211215184147.3688785-3-zack@kde.org
(cherry picked from commit 11343099d5ae6c7411da1425b6b162c89fb5bf10)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
Old versions of the svga device used to export virtual vram, handling of
which was optimized on top of transparent hugepages support. Only very
old devices (OpenGL 2.1 support and earlier) used this code and at this
point performance differences are negligible.
Because the code requires very old hardware versions to run it has
been largely untested and unused for a long time.
Furthermore removal of the ttm hugepages support in:
commit 0d979509539e ("drm/ttm: remove ttm_bo_vm_insert_huge()")
broke the coherency mode in vmwgfx when running with hugepages.
Fixes: 0d979509539e ("drm/ttm: remove ttm_bo_vm_insert_huge()")
Signed-off-by: Zack Rusin <zackr@vmware.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211215184147.3688785-2-zack@kde.org
(cherry picked from commit 49d535d64d52945e2c874f380705675e20a02b6a)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
On i386 size_t is of course 32bits and using long int throws warnings,
trivially fix it by using the dedicated size_t format.
This is enough to fix the following warning found by the kernel test
robot:
drivers/gpu/drm/vmwgfx/vmwgfx_gem.c: In function 'vmw_bo_print_info':
>> drivers/gpu/drm/vmwgfx/vmwgfx_gem.c:230:33: warning: format '%ld'
expects argument of type 'long int', but argument 4 has type 'size_t'
{aka 'unsigned int'} [-Wformat=]
230 | seq_printf(m, "\t\t0x%08x: %12ld bytes %s, type = %s",
| ~~~~^
| |
| long int
| %12d
231 | id, bo->base.base.size, placement, type);
| ~~~~~~~~~~~~~~~~~~
| |
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Fixes: 8afa13a0583f ("drm/vmwgfx: Implement DRIVER_GEM")
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211215184147.3688785-1-zack@kde.org
(cherry picked from commit 72345114c96b8211ec693b1ce59f95a83a613f1d)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
Drop superfluous "the" from the comment in line 15.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
[ rjw: Subject edit, new changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Kalle Valo says:
====================
wireless-drivers-next patches for v5.17
Second set of patches for v5.17, planning to do at least one more.
Smaller new features, nothing special this time.
Major changes:
rtw88
* debugfs file to fix tx rate
iwlwifi
* support SAR GEO Offset Mapping (SGOM) via BIOS
* support firmware API version 68
* add some new device IDs
ath11k
* support PCI devices with 1 MSI vector
* WCN6855 hw2.1 support
* 11d scan offload support
* full monitor mode, only supported on QCN9074
* scan MAC address randomization support
* reserved host DDR addresses from DT for PCI devices support
ath9k
* switch to rate table based lookup
ath
* extend South Korea regulatory domain support
wcn36xx
* beacon filter support
* tag 'wireless-drivers-next-2021-12-17' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next: (129 commits)
wcn36xx: Implement beacon filtering
wcn36xx: Fix physical location of beacon filter comment
wcn36xx: Fix beacon filter structure definitions
ath11k: Use reserved host DDR addresses from DT for PCI devices
dt: bindings: add new DT entry for ath11k PCI device support
wilc1000: Improve WILC TX performance when power_save is off
wl1251: specify max. IE length
rsi: fix array out of bound
wilc1000: Rename workqueue from "WILC_wq" to "NETDEV-wq"
wilc1000: Rename tx task from "K_TXQ_TASK" to NETDEV-tx
wilc1000: Rename irq handler from "WILC_IRQ" to netdev name
wilc1000: Rename SPI driver from "WILC_SPI" to "wilc1000_spi"
wilc1000: Fix spurious "FW not responding" error
wilc1000: Remove misleading USE_SPI_DMA macro
wilc1000: Fix missing newline in error message
wilc1000: Fix copy-and-paste typo in wilc_set_mac_address
rtw89: coex: Update COEX to 5.5.8
rtw89: coex: Cancel PS leaving while C2H comes
rtw89: coex: Update BT counters while receiving report
rtw89: coex: Define LPS state for BTC using
...
====================
Link: https://lore.kernel.org/r/20211217130952.34887C36AE9@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 796eed4b2342c9d6b26c958e92af91253a2390e1.
This change causes boot lockups when using "arlyprintk=xdbc" because
ktime can not be used at this point in time in the boot process. Also,
it is not needed for very small delays like this.
Reported-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Cc: Jann Horn <jannh@google.com>
Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>
Fixes: 796eed4b2342 ("usb: early: convert to readl_poll_timeout_atomic()")
Link: https://lore.kernel.org/r/c2b5c9bb-1b75-bf56-3754-b5b18812d65e@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
It is not necessary to call intel_pstate_get_hwp_cap() from
intel_pstate_update_perf_limits(), because it gets called from
intel_pstate_verify_cpu_policy() which is either invoked directly
right before intel_pstate_update_perf_limits(), in
intel_cpufreq_verify_policy() in the passive mode, or called
from driver callbacks in a sequence that causes it to be followed
by an immediate intel_pstate_update_perf_limits().
Namely, in the active mode intel_cpufreq_verify_policy() is called
by intel_pstate_verify_policy() which is the ->verify() callback
routine of intel_pstate and gets called by the cpufreq core right
before intel_pstate_set_policy(), which is the driver's ->setoplicy()
callback routine, where intel_pstate_update_perf_limits() is called.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Because refcount_dec_not_one() returns true if the target refcount
becomes saturated, it is generally unsafe to use its return value as
a loop termination condition, but that is what happens when a device
link's supplier device is released during runtime PM suspend
operations and on device link removal.
To address this, introduce pm_runtime_release_supplier() to be used
in the above cases which will check the supplier device's runtime
PM usage counter in addition to the refcount_dec_not_one() return
value, so the loop can be terminated in case the rpm_active refcount
value becomes invalid, and update the code in question to use it as
appropriate.
This change is not expected to have any visible functional impact.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
Fix function name in sysfs.c kernel-doc comment
to remove a warning found by running scripts/kernel-doc,
which is caused by using 'make W=1'.
drivers/cpuidle/sysfs.c:512: warning: expecting prototype for
cpuidle_remove_driver_sysfs(). Prototype was for
cpuidle_remove_state_sysfs() instead
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In some cases (for example, during system-wide suspend and resume of
devices) it is useful to know whether or not runtime PM has ever been
enabled for a given device and, if so, what the runtime PM status of
it had been right before runtime PM was disabled for it last time.
For this reason, introduce a new struct dev_pm_info field called
last_status that will be used for capturing the runtime PM status of
the device when its power.disable_depth counter changes from 0 to 1.
The new field will be set to RPM_INVALID to start with and whenever
power.disable_depth changes from 1 to 0, so it will be valid only
when runtime PM of the device is currently disabled, but it has been
enabled at least once.
Immediately use power.last_status in rpm_resume() to make it handle
the case when PM runtime is disabled for the device, but its runtime
PM status is RPM_ACTIVE more consistently. Namely, make it return 1
if power.last_status is also equal to RPM_ACTIVE in that case (the
idea being that if the status was RPM_ACTIVE last time when
power.disable_depth was changing from 0 to 1 and it is still
RPM_ACTIVE, it can be assumed to reflect what happened to the device
last time when it was using runtime PM) and -EACCES otherwise.
Update the documentation to provide a description of last_status and
change the description of pm_runtime_resume() in it to reflect the
new behavior of rpm_active().
While at it, rearrange the code in pm_runtime_enable() to be more
straightforward and replace the WARN() macro in it with a pr_warn()
invocation which is less disruptive.
Link: https://lore.kernel.org/linux-pm/20211026222626.39222-1-ulf.hansson@linaro.org/t/#u
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
On Sapphire Rapids, the layout of the Psys domain Power Limit Register
is different from from what it was before.
Enhance the code to support the new Psys PL register layout.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reported-and-tested-by: Alkattan Dana <dana.alkattan@intel.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Some new drivers changes for the Allwinner SoCs, fixing the shutdown
path of the RSB driver
* tag 'sunxi-drivers-for-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
bus: sunxi-rsb: Fix shutdown
Link: https://lore.kernel.org/r/6f2f75ad-de62-49a4-82a4-8655a567a09e.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The pm_ptr() macro should be used when the suspend and resume functions
can be compiled independently of the CONFIG_PM Kconfig option.
In the case of this driver, the suspend and resume functions are inside
a section protected by a #ifdef CONFIG_PM guard. Therefore pm_ptr()
should not be used.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Renesas driver updates for v5.17 (take two)
- Core support for the R-Car S4-8 (R8A779F0) SoC, including System
Controller (SYSC) and Reset (RST) support.
* tag 'renesas-drivers-for-v5.17-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
soc: renesas: rcar-rst: Add support for R-Car S4-8
soc: renesas: Identify R-Car S4-8
soc: renesas: r8a779f0-sysc: Add r8a779f0 support
soc: renesas: rcar-gen4-sysc: Introduce R-Car Gen4 SYSC driver
dt-bindings: clock: Add r8a779f0 CPG Core Clock Definitions
dt-bindings: power: Add r8a779f0 SYSC power domain definitions
Link: https://lore.kernel.org/r/cover.1639736722.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Our usual round of DT patches for the 5.17 merge window, with:
- Introduction of the chassis-type property
- I2C, SPDIF support for the Tanix TX6
- Memory frequency scaling for the A64 and H5
- Hantro G2 support for the H6
- New Board: Tanix TX6 Mini
* tag 'sunxi-dt-for-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: h6: Add Hantro G2 node
arm64: dts: allwinner: h6: tanix-tx6: Enable bluetooth
arm64: dts: allwinner: h6: tanix: Add MMC1 node
arm64: dts: allwinner: h6: Add Tanix TX6 mini dts
dt-bindings: arm: sunxi: Add Tanix TX6 mini
arm64: dts: allwinner: h6: tanix-tx6: Split to DT and DTSI
ARM: dts: sun8i: Adjust power key nodes
arm64: dts: allwinner: a64: Update MBUS node
ARM: dts: sunxi: h3/h5: Update MBUS node
dt-bindings: arm: sunxi: Add H5 MBUS compatible
dt-bindings: arm: sunxi: Expand MBUS binding
dt-bindings: clock: sunxi: Export CLK_DRAM for devfreq
dt-bindings: crypto: Add optional dma properties
ARM: dts: sun8i: h3: beelink-x2: Add GPIO CEC node
ARM: dts: sunxi: Add CEC clock to DW-HDMI
arm64: dts: allwinner: a64: Add CEC clock to HDMI
ARM: dts: sun8i: h3: beelink-x2: Sort nodes
arm64: dts: allwinner: h6: tanix-tx6: Add I2C node
arm64: dts: allwinner: h6: tanix-tx6: Add SPDIF
arm64: dts: allwinner: add 'chassis-type' property
Link: https://lore.kernel.org/r/ef385139-6fd4-42d2-9bfe-a4dda7ac76c9.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
TEE and OP-TEE fixes for v5.16
- Fixes a race when a tee_shm reaches reference count 0 and is about to
be teared down
- Fixes an incorrect page free bug in an error path of the OP-TEE shared
memory pool handling
- Suppresses a false positive kmemleak report when allocating driver
private shared memory buffers for OP-TEE
* tag 'fixes-for-v5.16' of https://git.linaro.org/people/jens.wiklander/linux-tee:
optee: Suppress false positive kmemleak report in optee_handle_rpc()
tee: optee: Fix incorrect page free bug
tee: handle lookup of shm with reference count 0
Link: https://lore.kernel.org/r/20211216150745.GA3347954@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Commit e428e250fde6 ("ARM: dts: Configure system timers for omap3")
caused a timer regression for beagleboard revision c where the system
clockevent stops working if omap3isp module is unloaded.
Turns out we still have beagleboard revisions a-b4 capacitor c70 quirks
applied that limit the usable timers for no good reason. This also affects
the power management as we use the system clock instead of the 32k clock
source.
Let's fix the issue by adding a new omap3-beagle-ab4.dts for the old timer
quirks. This allows us to remove the timer quirks for later beagleboard
revisions. We also need to update the related timer quirk check for the
correct compatible property.
Fixes: e428e250fde6 ("ARM: dts: Configure system timers for omap3")
Cc: linux-kernel@vger.kernel.org
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rob Herring <robh+dt@kernel.org>
Reported-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Tested-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Similar to other resources the AMBA bus "gets" for the device,
move irq obtain from amba_device_add() to amba_probe().
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
As Rob said[1], there doesn't seem to be any users about the sysfs
attribute file of irq[0] and irq[1]. And we don't need to include
<asm/irq.h> as NO_IRQ has gone. Let's kill both of them.
[1] https://lkml.org/lkml/2021/8/25/461
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
intel-gpio for v5.17-1
- Don't set type for IRQ already in use in case of ACPI
- Drop unused call from GPIO ACPI library
- Clean up ML IOH and PCH GPIO drivers to make it closer to each other
- Clarify use of register file version in DesignWare driver
- other minor tweaks
|
|
Some GPIO providers set names for GPIO lines that match the names of
the pins on the SoC, or variations on that theme. These names are
generic more often that not, such as pioC12 in the at91 case. These
generic names block the possibility to set more useful GPIO line
names with device properties (i.e. gpio-line-names).
Allow overriding a generic name given by the GPIO driver if there is
a name given to the GPIO line using device properties, but leave the
generic name alone if no better name is available.
However, there is a risk. If user space is depending on the above
mentioned fixed GPIO names, AND there are device properties that
previously did not reach the surface, the name change might cause
regressions. But hopefully this stays below the radar...
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Tested-by: Alexander Dahl <ada@thorsis.com>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
Add an ACPI HID(AMDIF031) and pin number in the pt_gpio_acpi_match.
Signed-off-by: Yuchang Hsu <Richard_Hsu@asmedia.com.tw>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
Extend the existing Tegra186 GPIO controller driver with support for the
GPIO controller found on Tegra234. While the programming model remains
the same, the number of pins has slightly changed.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
The double `all' in the comment in line 327 is repeated. Remove one
of them from the comment.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
Implement a new, modern GPIO testing module controlled by configfs
attributes instead of module parameters. The goal of this driver is
to provide a replacement for gpio-mockup that will be easily extensible
with new features and doesn't require reloading the module to change
the setup.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
|
|
If the driver sets the fwnode in struct gpio_chip, let it take
precedence over the of_node. This only affects OF-based systems,
ACPI needs to be converted separately.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Software nodes allow us to represent hierarchies for device components
that don't have their struct device representation yet - for instance:
banks of GPIOs under a common GPIO expander. The core gpiolib core
however doesn't offer any way of passing this information from the
drivers.
This extends struct gpio_chip with a pointer to fwnode that can be set
by the driver and used to pass device properties for child nodes.
This is similar to how we handle device-tree sub-nodes with
CONFIG_OF_GPIO enabled.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Currently all users of gpiod_add_hogs() call it only once at system
init so there never was any need for a mechanism allowing to remove
them. Now the upcoming gpio-sim will need to tear down chips with hogged
lines so provide a function that allows to remove hogs.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
|
|
dmaengine_topic_slave_id_removal_5.17
Tag for dmaengine slave_id removal topic branch which should be merged
into v5.17
|
|
bo->tbo.resource can now be NULL.
Signed-off-by: Christian König <christian.koenig@amd.com>
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1811
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211210083927.1754-1-christian.koenig@amd.com
|
|
Return status directly from function called.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211213112627.436745-1-chi.minghao@zte.com.cn
|
|
devsize is not used anywhere in code. Drop it.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211209090458.24830-7-rogerq@kernel.org
|
|
In DMA mode we were not considering the force_8bit flag.
Fix it by using regular non-DMA 8-bit I/O if force_8bit flag is set.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211209090458.24830-6-rogerq@kernel.org
|
|
AM64 SoC contains the GPMC NAND controller. Add compatible for it.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211209090458.24830-5-rogerq@kernel.org
|
|
Stop using legacy interface and move to the exec_op interface.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211209090458.24830-4-rogerq@kernel.org
|
|
K3 platforms come with GPMC. Enable GPMC build for
K3 platforms.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211209090458.24830-3-rogerq@kernel.org
|
|
Remove unneeded variable used to store return value.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The wait_for_connected() function doesn't modify "*port1" and there is
no need to pass a pointer. Just pass the int itself.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211210142028.GB18906@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Johan writes:
USB-serial fixes for 5.16-rc6
Here's a fix for a reported problem in the cp210x gpio-registration code
and some more modem device ids.
All have been in linux-next with no reported issues.
* tag 'usb-serial-5.16-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add Telit FN990 compositions
USB: serial: cp210x: fix CP2105 GPIO registration
|
Wei Yongjun
Kai-Heng Feng
Fabrice Gasnier
Rob Herring
Rafael J. Wysocki
Srinivas Pandruvada
Zack Rusin
Jason Wang
Jakub Kicinski
Greg Kroah-Hartman
Yang Li
Zhang Rui
Arnd Bergmann
Paul Cercueil
Tony Lindgren
Wang Kefeng
Bartosz Golaszewski
Peter Rosin
Hsu Yuchang
Prathamesh Shete
Mark Brown
Christian König
Minghao Chi
Roger Quadros
Changcheng Deng
Dan Carpenter