aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2021-12-14net: dsa: hellcreek: Add missing PTP via UDP rulesKurt Kanzenbach1-4/+60
The switch supports PTP for UDP transport too. Therefore, add the missing static FDB entries to ensure correct forwarding of these packets. Fixes: ddd56dfe52c9 ("net: dsa: hellcreek: Add PTP clock support") Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-14net: dsa: hellcreek: Allow PTP P2P measurements on blocked portsKurt Kanzenbach1-1/+1
Allow PTP peer delay measurements on blocked ports by STP. In case of topology changes the PTP stack can directly start with the correct delays. Fixes: ddd56dfe52c9 ("net: dsa: hellcreek: Add PTP clock support") Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-14net: dsa: hellcreek: Add STP forwarding ruleKurt Kanzenbach1-0/+14
Treat STP as management traffic. STP traffic is designated for the CPU port only. In addition, STP traffic has to pass blocked ports. Fixes: e4b27ebc780f ("net: dsa: Add DSA driver for Hirschmann Hellcreek switches") Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-14net: dsa: hellcreek: Fix insertion of static FDB entriesKurt Kanzenbach1-2/+5
The insertion of static FDB entries ignores the pass_blocked bit. That bit is evaluated with regards to STP. Add the missing functionality. Fixes: e4b27ebc780f ("net: dsa: Add DSA driver for Hirschmann Hellcreek switches") Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-14IB/mthca: Use memset_startat() for clearing mpt_entryKees Cook1-2/+1
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memset(), avoid intentionally writing across neighboring fields. Use memset_startat() so memset() doesn't get confused about writing beyond the destination member that is intended to be the starting point of zeroing through the end of the struct. Link: https://lore.kernel.org/r/20211213223331.135412-15-keescook@chromium.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-12-14iw_cxgb4: Use memset_startat() for cpl_t5_pass_accept_rplKees Cook2-3/+4
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memset(), avoid intentionally writing across neighboring fields. Use memset_startat() so memset() doesn't get confused about writing beyond the destination member that is intended to be the starting point of zeroing through the end of the struct. Additionally, since everything appears to perform a roundup (including allocation), just change the size of the struct itself and add a build-time check to validate the expected size. Link: https://lore.kernel.org/r/20211213223331.135412-13-keescook@chromium.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-12-14RDMA/mlx5: Use memset_after() to zero struct mlx5_ib_mrKees Cook1-2/+2
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memset(), avoid intentionally writing across neighboring fields. Use memset_after() to zero the end of struct mlx5_ib_mr that should be initialized. Link: https://lore.kernel.org/r/20211213223331.135412-10-keescook@chromium.org Acked-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-12-14Merge tag 'v5.16-rc5' into rdma.git for-nextJason Gunthorpe591-5096/+5033
Required due to dependencies in following patches. Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-12-14RDMA/hns: Replace kfree() with kvfree()Jiacheng Shi1-1/+1
Variables allocated by kvmalloc_array() should not be freed by kfree. Because they may be allocated by vmalloc. So we replace kfree() with kvfree() here. Fixes: 6fd610c5733d ("RDMA/hns: Support 0 hop addressing for SRQ buffer") Link: https://lore.kernel.org/r/20211210094234.5829-1-billsjc@sjtu.edu.cn Signed-off-by: Jiacheng Shi <billsjc@sjtu.edu.cn> Acked-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-12-14RDMA/cma: Let cma_resolve_ib_dev() continue search even after empty entryAvihai Horon1-3/+9
Currently, when cma_resolve_ib_dev() searches for a matching GID it will stop searching after encountering the first empty GID table entry. This behavior is wrong since neither IB nor RoCE spec enforce tightly packed GID tables. For example, when the matching valid GID entry exists at index N, and if a GID entry is empty at index N-1, cma_resolve_ib_dev() will fail to find the matching valid entry. Fix it by making cma_resolve_ib_dev() continue searching even after encountering missing entries. Fixes: f17df3b0dede ("RDMA/cma: Add support for AF_IB to rdma_resolve_addr()") Link: https://lore.kernel.org/r/b7346307e3bb396c43d67d924348c6c496493991.1639055490.git.leonro@nvidia.com Signed-off-by: Avihai Horon <avihaih@nvidia.com> Reviewed-by: Mark Zhang <markzhang@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-12-14RDMA/core: Let ib_find_gid() continue search even after empty entryAvihai Horon1-1/+2
Currently, ib_find_gid() will stop searching after encountering the first empty GID table entry. This behavior is wrong since neither IB nor RoCE spec enforce tightly packed GID tables. For example, when a valid GID entry exists at index N, and if a GID entry is empty at index N-1, ib_find_gid() will fail to find the valid entry. Fix it by making ib_find_gid() continue searching even after encountering missing entries. Fixes: 5eb620c81ce3 ("IB/core: Add helpers for uncached GID and P_Key searches") Link: https://lore.kernel.org/r/e55d331b96cecfc2cf19803d16e7109ea966882d.1639055490.git.leonro@nvidia.com Signed-off-by: Avihai Horon <avihaih@nvidia.com> Reviewed-by: Mark Zhang <markzhang@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-12-14RDMA/core: Modify rdma_query_gid() to return accurate error codesAvihai Horon1-3/+9
Modify rdma_query_gid() to return -ENOENT for empty entries. This will make error reporting more accurate and will be used in next patches. Link: https://lore.kernel.org/r/1f2b65dfb4d995e74b621e3e21e7c7445d187956.1639055490.git.leonro@nvidia.com Signed-off-by: Avihai Horon <avihaih@nvidia.com> Reviewed-by: Mark Zhang <markzhang@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-12-14IB/qib: Fix memory leak in qib_user_sdma_queue_pkts()José Expósito1-1/+1
The wrong goto label was used for the error case and missed cleanup of the pkt allocation. Fixes: d39bf40e55e6 ("IB/qib: Protect from buffer overflow in struct qib_user_sdma_pkt fields") Link: https://lore.kernel.org/r/20211208175238.29983-1-jose.exposito89@gmail.com Addresses-Coverity-ID: 1493352 ("Resource leak") Signed-off-by: José Expósito <jose.exposito89@gmail.com> Acked-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-12-14RDMA/hns: Support direct wqe of userspaceYixing Liu5-12/+92
The current write wqe mechanism is to write to DDR first, and then notify the hardware through doorbell to read the data. Direct wqe is a mechanism to fill wqe directly into the hardware. In the case of light load, the wqe will be filled into pcie bar space of the hardware, this will reduce one memory access operation and therefore reduce the latency. SIMD instructions allows cpu to write the 512 bits at one time to device memory, thus it can be used for posting direct wqe. Add direct wqe enable switch and address mapping. Link: https://lore.kernel.org/r/20211207124901.42123-2-liangwenpeng@huawei.com Signed-off-by: Yixing Liu <liuyixing1@huawei.com> Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-12-14RDMA/hns: Fix RNR retransmission issue for HIP08Yangyang Li2-7/+65
Due to the discrete nature of the HIP08 timer unit, a requester might finish the timeout period sooner, in elapsed real time, than its responder does, even when both sides share the identical RNR timeout length included in the RNR Nak packet and the responder indeed starts the timing prior to the requester. Furthermore, if a 'providential' resend packet arrived before the responder's timeout period expired, the responder is certainly entitled to drop the packet silently in the light of IB protocol. To address this problem, our team made good use of certain hardware facts: 1) The timing resolution regards the transmission arrangements is 1 microsecond, e.g. if cq_period field is set to 3, it would be interpreted as 3 microsecond by hardware 2) A QPC field shall inform the hardware how many timing unit (ticks) constitutes a full microsecond, which, by default, is 1000 3) It takes 14ns for the processor to handle a packet in the buffer, so the RNR timeout length of 10ns would ensure our processing mechanism is disabled during the entire timeout period and the packet won't be dropped silently To achieve (3), we permanently set the QPC field mentioned in (2) to zero which nominally indicates every time tick is equivalent to a microsecond in wall-clock time; now, a RNR timeout period at face value of 10 would only last 10 ticks, which is 10ns in wall-clock time. It's worth noting that we adapt the driver by magnifying certain configuration parameters(cq_period, eq_period and ack_timeout)by 1000 given the user assumes the configuring timing unit to be microseconds. Also, this particular improvisation is only deployed on HIP08 since other hardware has already solved this issue. Fixes: cfc85f3e4b7f ("RDMA/hns: Add profile support for hip08 driver") Link: https://lore.kernel.org/r/20211209140655.49493-1-liangwenpeng@huawei.com Signed-off-by: Yangyang Li <liyangyang20@huawei.com> Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-12-14drm/i915: replace X86_FEATURE_PAT with pat_enabled()Lucas De Marchi2-6/+5
PAT can be disabled on boot with "nopat" in the command line. Replace one x86-ism with another, which is slightly more correct to prepare for supporting other architectures. Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211202003048.1015511-1-lucas.demarchi@intel.com
2021-12-14drm/amd/pm: fix a potential gpu_metrics_table memory leakLang Yu1-0/+3
Memory is allocated for gpu_metrics_table in renoir_init_smc_tables(), but not freed in int smu_v12_0_fini_smc_tables(). Free it! Fixes: 95868b85764a ("drm/amd/powerplay: add Renoir support for gpu metrics export") Signed-off-by: Lang Yu <lang.yu@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-14drm/amdgpu: correct the wrong cached state for GMC on PICASSOEvan Quan3-5/+18
Pair the operations did in GMC ->hw_init and ->hw_fini. That can help to maintain correct cached state for GMC and avoid unintention gate operation dropping due to wrong cached state. BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1828 Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-14drm/amd/display: Reset DMCUB before HW initNicholas Kazlauskas1-0/+5
[Why] If the firmware wasn't reset by PSP or HW and is currently running then the firmware will hang or perform underfined behavior when we modify its firmware state underneath it. [How] Reset DMCUB before setting up cache windows and performing HW init. Reviewed-by: Aurabindo Jayamohanan Pillai <Aurabindo.Pillai@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-14drm/amd/display: Set exit_optimized_pwr_state for DCN31Nicholas Kazlauskas1-0/+1
[Why] SMU now respects the PHY refclk disable request from driver. This causes a hang during hotplug when PHY refclk was disabled because it's not being re-enabled and the transmitter control starts on dc_link_detect. [How] We normally would re-enable the clk with exit_optimized_pwr_state but this is only set on DCN21 and DCN301. Set it for dcn31 as well. This fixes DMCUB timeouts in the PHY. Fixes: 64b1d0e8d500 ("drm/amd/display: Add DCN3.1 HWSEQ") Reviewed-by: Eric Yang <Eric.Yang2@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-14drm/amd/pm: fix reading SMU FW version from amdgpu_firmware_info on YCMario Limonciello1-0/+3
This value does not get cached into adev->pm.fw_version during startup for smu13 like it does for other SMU like smu12. Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-12-14drm/amdgpu: don't override default ECO_BITs settingHawking Zhang8-9/+0
Leave this bit as hardware default setting Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-12-14drm/amdgpu: correct register access for RLC_JUMP_TABLE_RESTORELe Ma1-2/+2
should count on GC IP base address Signed-off-by: Le Ma <le.ma@amd.com> Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-12-14Merge branch 'icc-sm8450' into icc-nextGeorgi Djakov4-0/+2167
This add device tree binding and driver for interconnect providers found in SM8450 SoC. * icc-sm8450 dt-bindings: interconnect: Add Qualcomm SM8450 DT bindings interconnect: qcom: Add SM8450 interconnect provider driver Link: https://lore.kernel.org/r/20211209084842.189627-1-vkoul@kernel.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-12-14interconnect: qcom: Add SM8450 interconnect provider driverVinod Koul4-0/+2167
Add driver for the Qualcomm interconnect buses found in SM8450 based platforms. The topology consists of several NoCs that are controlled by a remote processor that collects the aggregated bandwidth for each master-slave pairs. This is based on the downstream driver by Vivek Aknurwar <viveka@codeaurora.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20211209084842.189627-3-vkoul@kernel.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-12-14drm/radeon: Fix syntax errors in commentsXiang wangx1-1/+1
Delete the redundant word 'we'. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-14amdgpu: fix some comment typosYann Dirson2-2/+2
Signed-off-by: Yann Dirson <ydirson@free.fr> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-14amdgpu: fix some kernel-doc markupYann Dirson3-6/+6
Those are not today pulled by the sphinx doc, but better be ready. Signed-off-by: Yann Dirson <ydirson@free.fr> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-14drm/amd/pm: fix a potential gpu_metrics_table memory leakLang Yu1-0/+3
Memory is allocated for gpu_metrics_table in renoir_init_smc_tables(), but not freed in int smu_v12_0_fini_smc_tables(). Free it! Fixes: 95868b85764a ("drm/amd/powerplay: add Renoir support for gpu metrics export") Signed-off-by: Lang Yu <lang.yu@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-14drm/amd/amdgpu: fix gmc bo pin count leak in SRIOVJingwen Chen2-0/+8
[Why] gmc bo will be pinned during loading amdgpu and reset in SRIOV while only unpinned in unload amdgpu [How] add amdgpu_in_reset and sriov judgement to skip pin bo v2: fix wrong judgement Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com> Reviewed-by: Horace Chen <horace.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-14drm/amd/amdgpu: fix psp tmr bo pin count leak in SRIOVJingwen Chen1-0/+4
[Why] psp tmr bo will be pinned during loading amdgpu and reset in SRIOV while only unpinned in unload amdgpu [How] add amdgpu_in_reset and sriov judgement to skip pin bo v2: fix wrong judgement Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com> Reviewed-by: Horace Chen <horace.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-14drm/amd/pm: Skip power state allocationLijo Lazar2-20/+0
Power states are not valid for arcturus and aldebaran, no need to allocate memory. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-14drm/amdgpu: correct the wrong cached state for GMC on PICASSOEvan Quan3-5/+18
Pair the operations did in GMC ->hw_init and ->hw_fini. That can help to maintain correct cached state for GMC and avoid unintention gate operation dropping due to wrong cached state. BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1828 Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-14drm/amdgpu: use adev_to_drm to get drm_device pointerGuchun Chen1-1/+1
Updated for consistency when accessing drm_device from amdgpu driver. Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-14drm/amdgpu: move smu_debug_mask to a more proper placeEvan Quan4-16/+18
As the smu_context will be invisible from outside(of power). Also, the smu_debug_mask can be shared around all power code instead of some specific framework(swSMU) only. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-14drm/amdgpu: SRIOV flr_work should use down_writeVictor Skvortsov2-4/+6
Host initiated VF FLR may fail if someone else is already holding a read_lock. Change from down_write_trylock to down_write to guarantee the reset goes through. Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com> Reviewed by: Shaoyun.liu <Shaoyun.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-14drm/amd/display: 3.2.166Aric Cyr1-1/+1
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-14drm/amd/display: implement dc_mode_memclkMartin Leung14-7/+188
why: Need interface to lower clocks when in dc (power save) mode. Must be able to work with p_state unsupported cases Can cause flicker when OS notifies us of dc state change how: added dal3 interface for KMD added pathway to query smu for this softmax added blank before clock change to override underflow added logic to change clk based on pstatesupport and softmax added logic in prepare/optimize_bw to conform while changing clocks Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Martin Leung <Martin.Leung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-14drm/amd/display: ODM + MPO window on only one half of ODMEric Bernstein2-21/+71
[Why] For ODM + MPO window on one half of ODM, only 3 pipes should be allocated and scaling parameters adjusted to handle this case [How] Fix pipe allocation when MPO viewport is only on one side of ODM split, and modify scaling paramters. Added diags test cases for ODM + windows MPO, where MPO window is on right half, left half, and both halves or ODM. Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-14drm/amd/display: Reset DMCUB before HW initNicholas Kazlauskas1-0/+5
[Why] If the firmware wasn't reset by PSP or HW and is currently running then the firmware will hang or perform underfined behavior when we modify its firmware state underneath it. [How] Reset DMCUB before setting up cache windows and performing HW init. Reviewed-by: Aurabindo Jayamohanan Pillai <Aurabindo.Pillai@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-14drm/amd/display: [FW Promotion] Release 0.0.97Anthony Koo1-2/+2
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-14drm/amd/display: Force det buf size to 192KB with 3+ streams and upscalingMichael Strauss1-0/+8
[WHY] This workaround resolves underflow caused by incorrect DST_Y_PREFETCH. Overriding to 192KB DET buf size until the DST_Y_PREFETCH calc is fixed. Reviewed-by: Eric Yang <Eric.Yang2@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-14drm/amd/display: parse and check PSR SU capsMikita Lipski3-12/+97
[why] Adding a function to read PSR capabilities and ALPM capabilities. Also adding a helper function to validate if the sink and the driver support PSR SU. [how] - isolated all PSR and ALPM reading calls to a separate funciton - set all required PSR caps - added a helper function to check if PSR SU is supported by sink and the driver Reviewed-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-14drm/amd/display: Add src/ext ID info for dummy serviceSolomon Chiu1-4/+6
[Why] Current error log of dummy irq service doesn't have src/ext ID info in the log. [How] Add src/ext ID in ack/set of dummy irq service. Reviewed-by: Wayne Lin <Wayne.Lin@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-14drm/amd/display: Add debugfs entry for ILRWayne Lin1-0/+134
[Why & How] In order to know the intermediate link rates supported by the eDP panel and test to select the optimized link rate to save power, create a new debugfs entry "ilr_setting" for setting ILR. Reviewed-by: Aurabindo Jayamohanan Pillai <Aurabindo.Pillai@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-14drm/amd/display: Set exit_optimized_pwr_state for DCN31Nicholas Kazlauskas1-0/+1
[Why] SMU now respects the PHY refclk disable request from driver. This causes a hang during hotplug when PHY refclk was disabled because it's not being re-enabled and the transmitter control starts on dc_link_detect. [How] We normally would re-enable the clk with exit_optimized_pwr_state but this is only set on DCN21 and DCN301. Set it for dcn31 as well. This fixes DMCUB timeouts in the PHY. Fixes: 64b1d0e8d500 ("drm/amd/display: Add DCN3.1 HWSEQ") Reviewed-by: Eric Yang <Eric.Yang2@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-14Merge branch 'fixes' into nextUlf Hansson1-17/+26
2021-12-14mmc: core: Remove redundant driver match functionlizhe1-11/+0
If there is no driver match function, the driver core assumes that each candidate pair (driver, device) matches, see driver_match_device(). Drop the mmc bus's match function that always returned 1 and so implements the same behaviour as when there is no match function. Signed-off-by: lizhe <sensor1010@163.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20211207095029.96387-1-sensor1010@163.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-12-14mmc: mmc_spi: Use write_or_read temporary variable in mmc_spi_data_do()Andy Shevchenko1-8/+4
Use write_or_read temporary variable in mmc_spi_data_do() to deduplicate the conditional code. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20211206115218.73874-2-andriy.shevchenko@linux.intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-12-14mmc: mmc_spi: Convert 'multiple' to be boolean in mmc_spi_data_do()Andy Shevchenko1-2/+2
Convert 'multiple' to be boolean in mmc_spi_data_do() since it's initially being used as boolean. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20211206115218.73874-1-andriy.shevchenko@linux.intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.