aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2021-12-08Merge tag 'iio-fixes-for-5.16b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-nextGreg Kroah-Hartman15-44/+36
Jonathan writes: 2nd set of IIO fixes for 5.16 Note 1st set were before the merge window. Biggest set in here fix what happens when things go wrong in the interrupt handlers for an IIO trigger. Otherwise normal mix of recent and ancient bugs. trigger core - Fix reference counting bug that was preventing the iio_trig structures from being released. adxrs290 - Correctly sign extend the rate and temperature data. at91-sama5d2 - Fix sign extension from the wrong bit and use the scan_type values to avoid it being open coded in two places (which were out of sync) axp20x_adc - Fix current reporting bit depth. dln2-adc - Fix a lock ordering issue and lockdep complaint that results. - Add error handling for failure to register the trigger. imx8qxp - Wrong config dependency kxcjk-1013 - Potential leak due to wrong guard on cleanup. ltr501, kxsd9, stk3310, itg3200, ad7768 - Don't return error codes from interrupt handler and call iio_trigger_notify_done() on all paths to avoid leaving trigger disabled on an intermittent fault. mma8452 - Fix missing iio_trigger_get() that could lead to use after free. stm32 - Fix a current leak. - Avoid null pointer derefence on defer_probe error due to wrong struct device being passed. stm32-timer - Drop space in MODULE_ALIAS. * tag 'iio-fixes-for-5.16b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: iio: trigger: stm32-timer: fix MODULE_ALIAS iio: adc: stm32: fix null pointer on defer_probe error iio: at91-sama5d2: Fix incorrect sign extension iio: adc: axp20x_adc: fix charging current reporting on AXP22x iio: gyro: adxrs290: fix data signedness iio: ad7768-1: Call iio_trigger_notify_done() on error iio: itg3200: Call iio_trigger_notify_done() on error iio: imx8qxp-adc: fix dependency to the intended ARCH_MXC config iio: dln2: Check return value of devm_iio_trigger_register() iio: trigger: Fix reference counting iio: dln2-adc: Fix lockdep complaint iio: adc: stm32: fix a current leak by resetting pcsel before disabling vdda iio: mma8452: Fix trigger reference couting iio: stk3310: Don't return error code in interrupt handler iio: kxsd9: Don't return error code in trigger handler iio: ltr501: Don't return error code in trigger handler iio: accel: kxcjk-1013: Fix possible memory leak in probe and remove
2021-12-08soc: imx: Register SoC device only on i.MX boardsStephan Gerhold1-0/+4
At the moment, using the ARM32 multi_v7_defconfig always results in two SoCs being exposed in sysfs. This is wrong, as far as I'm aware the Qualcomm DragonBoard 410c does not actually make use of a i.MX SoC. :) qcom-db410c:/sys/devices/soc0$ grep . * family:Freescale i.MX machine:Qualcomm Technologies, Inc. APQ 8016 SBC revision:0.0 serial_number:0000000000000000 soc_id:Unknown qcom-db410c:/sys/devices/soc1$ grep . * family:Snapdragon machine:APQ8016 ... This happens because imx_soc_device_init() registers the soc device unconditionally, even when running on devices that do not make use of i.MX. Arnd already reported this more than a year ago and even suggested a fix similar to this commit, but for some reason it was never submitted. Fix it by checking if the "__mxc_cpu_type" variable was actually initialized by earlier platform code. On devices without i.MX it will simply stay 0. Cc: Peng Fan <peng.fan@nxp.com> Fixes: d2199b34871b ("ARM: imx: use device_initcall for imx_soc_device_init") Reported-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/CAK8P3a0hxO1TmK6oOMQ70AHSWJnP_CAq57YMOutrxkSYNjFeuw@mail.gmail.com/ Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-12-08firmware: xilinx: check return value of zynqmp_pm_get_api_version()Rajan Vaja1-1/+4
Currently return value of zynqmp_pm_get_api_version() is ignored. Because of that, API version is checked in case of error also. So add check for return value of zynqmp_pm_get_api_version(). Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/1633509835-31949-1-git-send-email-rajan.vaja@xilinx.com Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-12-08soc: xilinx: add a to_zynqmp_pm_domain macroMichael Tretter1-12/+8
Replace container_of for converting a generic_pm_domain to a zynqmp_pm_domain with a macro definition to simplify the code. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Acked-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Rajan Vaja <rajan.vaja@xilinx.com> Link: https://lore.kernel.org/r/20210825150313.4033156-5-m.tretter@pengutronix.de Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-12-08soc: xilinx: use a properly named field instead of flagsMichael Tretter1-7/+5
Instead of defining a flags field and a single bit in this field to signal that a PM node has been requested, use a boolean field with a descriptive name. No functional change, but using a proper name instead of flags makes the code easier to read. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Acked-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Rajan Vaja <rajan.vaja@xilinx.com> Link: https://lore.kernel.org/r/20210825150313.4033156-4-m.tretter@pengutronix.de Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-12-08soc: xilinx: cleanup debug and error messagesMichael Tretter1-22/+23
Use dev_err/dev_dbg instead of pr_err/pr_debug. Add the PM node ids to supplement the (arbitrary) power domain names to include information which PM nodes are requested by the driver. Drop function names from the messages, because they can easily be added with dynamic debug. Remove comments explaining that error messages are printed on errors. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Acked-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Rajan Vaja <rajan.vaja@xilinx.com> Link: https://lore.kernel.org/r/20210825150313.4033156-3-m.tretter@pengutronix.de Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-12-08soc: xilinx: move PM_INIT_FINALIZE to zynqmp_pm_domains driverMichael Tretter2-1/+16
PM_INIT_FINALIZE tells the PMU FW that Linux is able to handle the power management nodes that are provided by the PMU FW. Nodes that are not requested are shut down after this call. Calling PM_INIT_FINALIZE from the zynqmp_power driver is wrong. The PM node request mechanism is implemented in the zynqmp_pm_domains driver, which must also call PM_INIT_FINALIZE. Due to the behavior of the PMU FW, all devices must be powered up before PM_INIT_FINALIZE is called, because otherwise the devices might misbehave. Calling PM_INIT_FINALIZE from the sync_state device callback ensures that all users probed successfully before the PMU FW is allowed to power off unused domains. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Acked-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Rajan Vaja <rajan.vaja@xilinx.com> Link: https://lore.kernel.org/r/20210825150313.4033156-2-m.tretter@pengutronix.de Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-12-08irqchip/irq-gic-v3-its.c: Force synchronisation when issuing INVALLWudi Wang1-1/+1
INVALL CMD specifies that the ITS must ensure any caching associated with the interrupt collection defined by ICID is consistent with the LPI configuration tables held in memory for all Redistributors. SYNC is required to ensure that INVALL is executed. Currently, LPI configuration data may be inconsistent with that in the memory within a short period of time after the INVALL command is executed. Signed-off-by: Wudi Wang <wangwudi@hisilicon.com> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Fixes: cc2d3216f53c ("irqchip: GICv3: ITS command queue") Link: https://lore.kernel.org/r/20211208015429.5007-1-zhangshaokun@hisilicon.com
2021-12-08drm/i915/selftests: handle object roundingMatthew Auld1-0/+1
Ensure we account for any object rounding due to min_page_size restrictions. Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Ramalingam C <ramalingam.c@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211206112539.3149779-4-matthew.auld@intel.com
2021-12-08drm/i915/migrate: fix length calculationMatthew Auld1-1/+1
No need to insert PTEs for the PTE window itself, also foreach expects a length not an end offset, which could be gigantic here with a second engine. Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Ramalingam C <ramalingam.c@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211206112539.3149779-3-matthew.auld@intel.com
2021-12-08drm/i915/migrate: fix offset calculationMatthew Auld1-1/+1
Ensure we add the engine base only after we calculate the qword offset into the PTE window. Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Ramalingam C <ramalingam.c@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211206112539.3149779-2-matthew.auld@intel.com
2021-12-08drm/i915/migrate: don't check the scratch pageMatthew Auld1-3/+1
The scratch page might not be allocated in LMEM(like on DG2), so instead of using that as the deciding factor for where the paging structures live, let's just query the pt before mapping it. Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Ramalingam C <ramalingam.c@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211206112539.3149779-1-matthew.auld@intel.com
2021-12-08thunderbolt: Do not dereference fwnode in struct deviceAndy Shevchenko1-1/+1
In order to make the underneath API easier to change in the future, prevent users from dereferencing fwnode from struct device. Instead, use the specific dev_fwnode() API for that. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-12-08clk: lan966x: Extend lan966x clock driver for clock gating supportHoratiu Vultur1-3/+56
Extend the clock driver to add support also for clock gating. The following peripherals can be gated: UHPHS, UDPHS, MCRAMC, HMATRIX. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20211103085102.1656081-5-horatiu.vultur@microchip.com
2021-12-08clk: gate: Add devm_clk_hw_register_gate()Horatiu Vultur1-0/+35
Add devm_clk_hw_register_gate() - devres-managed version of clk_hw_register_gate() Suggested-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20211103085102.1656081-2-horatiu.vultur@microchip.com
2021-12-08clk: lan966x: Add lan966x SoC clock driverKavyasree Kotagiri3-0/+248
This adds Generic Clock Controller driver for lan966x SoC. Lan966x clock controller contains 3 PLLs - cpu_clk, ddr_clk and sys_clk. It generates and supplies clock to various peripherals within SoC. Register settings required to provide GCK clocking to a peripheral is as below: GCK_SRC_SEL = Select clock source. GCK_PRESCALER = Set divider value. GCK_ENA = 1 - Enable GCK clock. Signed-off-by: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com> Co-developed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20211103061935.25677-4-kavyasree.kotagiri@microchip.com
2021-12-08can: hi311x: hi3110_can_probe(): convert to use dev_err_probe()Andy Shevchenko1-9/+4
When deferred the reason is saved for further debugging. Besides that, it's fine to call dev_err_probe() in ->probe() when error code is known. Convert the driver to use dev_err_probe(). Link: https://lore.kernel.org/all/20211206165542.69887-4-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-12-08can: hi311x: hi3110_can_probe(): make use of device property APIAndy Shevchenko1-6/+6
Make use of device property API in this driver so that both OF based system and ACPI based system can use this driver. Link: https://lore.kernel.org/all/20211206165542.69887-3-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-12-08can: hi311x: hi3110_can_probe(): try to get crystal clock rate from propertyAndy Shevchenko1-2/+11
In some configurations, mainly ACPI-based, the clock frequency of the device is supplied by very well established 'clock-frequency' property. Hence, try to get it from the property at last if no other providers are available. Link: https://lore.kernel.org/all/20211206165542.69887-2-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-12-08can: hi311x: hi3110_can_probe(): use devm_clk_get_optional() to get the input clockAndy Shevchenko1-10/+6
It's not clear what was the intention of redundant usage of IS_ERR() around the clock pointer since with the error check of devm_clk_get() followed by bailout it can't be invalid, Simplify the code which fetches the input clock by using devm_clk_get_optional(). It will allow to switch to device properties approach in the future. Link: https://lore.kernel.org/all/20211206165542.69887-1-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-12-08can: sun4i_can: add support for R40 CAN controllerEvgeny Boger1-2/+60
Allwinner R40 (also known as A40i, T3, V40) has a CAN controller. The controller is the same as in earlier A10 and A20 SoCs, but needs reset line to be deasserted before use. This patch adds a new compatible for R40 CAN controller. Depending on the compatible, reset line can be requested from DT. Link: https://lore.kernel.org/all/20211122104616.537156-3-boger@wirenboard.com Signed-off-by: Evgeny Boger <boger@wirenboard.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-12-08can: bittiming: replace CAN units with the generic ones from linux/units.hVincent Mailhol3-6/+9
In [1], we introduced a set of units in linux/can/bittiming.h. Since then, generic SI prefixes were added to linux/units.h in [2]. Those new prefixes can perfectly replace CAN specific ones. This patch replaces all occurrences of the CAN units with their corresponding prefix (from linux/units) and the unit (as a comment) according to below table. CAN units SI metric prefix (from linux/units) + unit (as a comment) ------------------------------------------------------------------------ CAN_KBPS KILO /* BPS */ CAN_MBPS MEGA /* BPS */ CAM_MHZ MEGA /* Hz */ The definition are then removed from linux/can/bittiming.h [1] commit 1d7750760b70 ("can: bittiming: add CAN_KBPS, CAN_MBPS and CAN_MHZ macros") [2] commit 26471d4a6cf8 ("units: Add SI metric prefix definitions") Link: https://lore.kernel.org/all/20211124014536.782550-1-mailhol.vincent@wanadoo.fr Suggested-by: Jimmy Assarsson <extja@kvaser.com> Suggested-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-12-08clk: renesas: r9a07g044: Add GPU clock and reset entriesBiju Das1-0/+9
Add GPU clock and reset entries to CPG driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20211203115154.31864-4-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-12-08clk: renesas: r9a07g044: Add mux and divider for G clockBiju Das2-0/+10
G clock is sourced from PLL3 and PLL6. The output of the mux is connected to divider. This patch adds a mux and divider for getting different rates from this clock sources. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20211203115154.31864-3-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-12-08clk: renesas: r9a07g044: Rename CLK_PLL3_DIV4 macroBiju Das1-2/+2
Rename the macro CLK_PLL3_DIV4->CLK_PLL3_DIV2_2 to match the clock tree mentioned in the hardware manual(Rev.1.00 Sep, 2021). Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20211203115154.31864-2-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-12-08clk: renesas: cpg-mssr: Add support for R-Car S4-8Yoshihiro Shimoda5-0/+196
Initial CPG support for R-Car S4-8 (r8a779f0). Inspired by patches in the BSP by LUU HOAI. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20211201073308.1003945-10-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-12-08clk: renesas: rcar-gen4: Introduce R-Car Gen4 CPG driverYoshihiro Shimoda7-341/+437
According to the official website [1], the R-Car V3U SoC is based on the R-Car Gen4 architecture. So, introduce R-Car Gen4 CPG driver. [1] https://www.renesas.com/us/en/products/automotive-products/automotive-system-chips-socs/r-car-v3u-best-class-r-car-v3u-asil-d-system-chip-automated-driving Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20211201073308.1003945-9-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-12-08ath10k: fix scan abort when duration is set for hw scanWen Gong1-4/+5
When request scan with duration 120ms on channel 1, it failed with scan abort easily. Because scan_timeout is set to 130ms for the scan in ath10k_hw_scan(), and timed out before scan complete, so lead scan abort. failed log of ath10k: 2021-04-14T14:43:29.936058Z DEBUG kernel: [67384.594846] ath10k_sdio mmc1:0001:1: wmi tlv start scan 2021-04-14T14:43:29.937896Z DEBUG kernel: [67384.595820] ath10k_sdio mmc1:0001:1: scan event started type 1 reason 7 freq 2437 req_id 40961 scan_id 40960 vdev_id 0 state starting (1) 2021-04-14T14:43:29.938357Z DEBUG kernel: [67384.596761] ath10k_sdio mmc1:0001:1: scan event bss channel type 4 reason 7 freq 2437 req_id 40961 scan_id 40960 vdev_id 0 state running (2) 2021-04-14T14:43:29.992497Z DEBUG kernel: [67384.651013] ath10k_sdio mmc1:0001:1: scan event foreign channel type 8 reason 7 freq 2412 req_id 40961 scan_id 40960 vdev_id 0 state running (2) 2021-04-14T14:43:30.063530Z DEBUG kernel: [67384.722139] ath10k_sdio mmc1:0001:1: wmi tlv stop scan 2021-04-14T14:43:30.066592Z DEBUG kernel: [67384.724403] ath10k_sdio mmc1:0001:1: scan event completed [cancelled] type 2 reason 1 freq 2412 req_id 40961 scan_id 40960 vdev_id 0 state aborting (3) failed log of wpa_supplicant: 2021-04-14T14:43:29.981842Z DEBUG wpa_supplicant[887]: wlan0: nl80211: scan request 2021-04-14T14:43:29.981988Z DEBUG wpa_supplicant[887]: nl80211: Passive scan requested 2021-04-14T14:43:29.982202Z DEBUG wpa_supplicant[887]: nl80211: Add NL80211_SCAN_FLAG_FLUSH 2021-04-14T14:43:29.982339Z DEBUG wpa_supplicant[887]: Scan requested (ret=0) - scan timeout 30 seconds 2021-04-14T14:43:29.982491Z DEBUG wpa_supplicant[887]: nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlan0 2021-04-14T14:43:29.982629Z DEBUG wpa_supplicant[887]: wlan0: nl80211: Scan trigger 2021-04-14T14:43:29.982779Z DEBUG wpa_supplicant[887]: wlan0: Event SCAN_STARTED (47) received 2021-04-14T14:43:29.982920Z DEBUG wpa_supplicant[887]: wlan0: Own scan request started a scan in 0.000175 seconds 2021-04-14T14:43:30.082401Z DEBUG wpa_supplicant[887]: nl80211: Drv Event 35 (NL80211_CMD_SCAN_ABORTED) received for wlan0 2021-04-14T14:43:30.082704Z DEBUG wpa_supplicant[887]: wlan0: nl80211: Scan aborted 2021-04-14T14:43:30.082905Z DEBUG wpa_supplicant[887]: nl80211: Scan included frequencies: 2412 2021-04-14T14:43:30.083123Z DEBUG wpa_supplicant[887]: wlan0: Event SCAN_RESULTS (3) received 2021-04-14T14:43:30.083310Z DEBUG wpa_supplicant[887]: wlan0: Scan completed in 0.128655 seconds This is to increase the scan_timeout with 200ms for this situation, then scan will not timed out for this situation. Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00049 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211026025902.26621-1-quic_wgong@quicinc.com
2021-12-08ath10k: Fix tx hangingSebastian Gottschall2-2/+3
While running stress tests in roaming scenarios (switching ap's every 5 seconds, we discovered a issue which leads to tx hangings of exactly 5 seconds while or after scanning for new accesspoints. We found out that this hanging is triggered by ath10k_mac_wait_tx_complete since the empty_tx_wq was not wake when the num_tx_pending counter reaches zero. To fix this, we simply move the wake_up call to htt_tx_dec_pending, since this call was missed on several locations within the ath10k code. Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20210505085806.11474-1-s.gottschall@dd-wrt.com
2021-12-08ath: regdom: extend South Korea regulatory domain supportPeter Oh2-0/+4
South Korea manufacturer, Samsung, has extended South Korea regulatory domain pair with 0x5F and has used it for their devices such as Samsung Galaxy book. Hence add support 0x5F as a regulatory domain pair along with extended country code, 413. Signed-off-by: Peter Oh <ebmajor.dev@gmail.com> Signed-off-by: Andreas Tepe <andreas.tepe@debitel.net> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20210915185611.6195-1-ebmajor.dev@gmail.com
2021-12-08ath11k: add wait operation for tx management packets for flush from mac80211Wen Gong4-10/+55
In ath11k, tx of management packet is doing in a work queue. Sometimes the workqueue does not finish tx immediately, then it lead after the next step of vdev delete finished, it start to send the management packet to firmware and lead firmware crash. ieee80211_set_disassoc() have logic of ieee80211_flush_queues() after it send_deauth_disassoc() to ath11k, its purpose is make sure the deauth was actually sent, so it need to change ath11k to match the purpose of mac80211. To address these issue wait for tx mgmt as well as tx data packets. dmesg log of connect/disconnect to AP: [ 307.522226] wls1: authenticate with 62:66:e4:e9:6a:a9 [ 307.586565] wls1: send auth to 62:66:e4:e9:6a:a9 (try 1/3) [ 307.586581] ath11k_pci 0000:05:00.0: mac tx mgmt frame, buf id 0 [ 307.586922] ath11k_pci 0000:05:00.0: mac tx mgmt frame, vdev_id 0 [ 307.590179] ath11k_pci 0000:05:00.0: wmi mgmt tx comp pending 0 desc id 0 [ 307.590181] ath11k_pci 0000:05:00.0: mgmt tx compl ev pdev_id 2, desc_id 0, status 0 [ 307.598699] wls1: authenticated [ 307.599483] wls1: associate with 62:66:e4:e9:6a:a9 (try 1/3) [ 307.599506] ath11k_pci 0000:05:00.0: mac tx mgmt frame, buf id 0 [ 307.599519] ath11k_pci 0000:05:00.0: mac tx mgmt frame, vdev_id 0 [ 307.603059] ath11k_pci 0000:05:00.0: wmi mgmt tx comp pending 0 desc id 0 [ 307.603063] ath11k_pci 0000:05:00.0: mgmt tx compl ev pdev_id 2, desc_id 0, status 0 [ 307.637105] wls1: associated [ 317.365239] wls1: deauthenticating from 62:66:e4:e9:6a:a9 by local choice (Reason: 3=DEAUTH_LEAVING) [ 317.368104] ath11k_pci 0000:05:00.0: mac tx mgmt frame, buf id 0 [ 317.372622] ath11k_pci 0000:05:00.0: mac tx mgmt frame, vdev_id 0 [ 317.378320] ath11k_pci 0000:05:00.0: wmi mgmt tx comp pending 0 desc id 0 [ 317.378330] ath11k_pci 0000:05:00.0: mgmt tx compl ev pdev_id 2, desc_id 0, status 0 [ 317.378359] ath11k_pci 0000:05:00.0: mac mgmt tx flush mgmt pending 0 [ 317.421066] ath11k_pci 0000:05:00.0: mac mgmt tx flush mgmt pending 0 [ 317.421427] ath11k_pci 0000:05:00.0: mac remove interface (vdev 0) Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01230-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211202063705.14321-1-quic_wgong@quicinc.com
2021-12-08carl9170: Use the bitmap API when applicableChristophe JAILLET1-6/+3
Use 'bitmap_zalloc()' to simplify code, improve the semantic and avoid some open-coded arithmetic in allocator arguments. Note, that this 'bitmap_zalloc()' divides by BITS_PER_LONG the amount of memory allocated. The 'roundup()' used to computed the number of needed long should have been a DIV_ROUND_UP. Also change the corresponding 'kfree()' into 'bitmap_free()' to keep consistency. Use 'bitmap_zero()' to avoid hand writing it. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/1fe18fb73f71d855043c40c83865ad539f326478.1638396221.git.christophe.jaillet@wanadoo.fr
2021-12-08wcn36xx: Fix max channels retrievalLoic Poulain1-1/+1
Kernel test robot reported:drivers/net/wireless/ath/wcn36xx/smd.c:943:33: sparse: sparse: cast truncates bits from constant value (780 becomes 80) The 'channels' field is not a simple u8 array but an array of channel_params. Using sizeof for retrieving the max number of channels is then wrong. In practice, it was not an issue, because the sizeof returned value is 780, which is truncated in min_t (u8) to 80, which is the value we expect... Fix that properly using ARRAY_SIZE instead of sizeof. Fixes: d707f812bb05 ("wcn36xx: Channel list update before hardware scan") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/1638435732-14657-1-git-send-email-loic.poulain@linaro.org
2021-12-08ath11k: add 11d scan offload supportWen Gong7-1/+360
Add handler for WMI_11D_NEW_COUNTRY_EVENTID, WMI_11D_SCAN_START_CMDID, WMI_11D_SCAN_STOP_CMDID. After vdev create for STATION, send WMI_11D_SCAN_START_CMDID to firmware and wait firmware complete it, the scan from mac80211 also need to wait the 11d scan finished, and send WMI_11D_SCAN_STOP_CMDID to firmware before vdev delete for STATION. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01230-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211201071745.17746-4-quic_wgong@quicinc.com
2021-12-08ath11k: add configure country code for QCA6390 and WCN6855Wen Gong2-0/+48
Add handler to send WMI_SET_CURRENT_COUNTRY_CMDID to firmware which is used for QCA6390 and WCN6855. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211201071745.17746-3-quic_wgong@quicinc.com
2021-12-08ath11k: avoid deadlock by change ieee80211_queue_work for regd_update_workWen Gong1-1/+1
When enable debug config, it print below warning while shut down wlan interface shuh as run "ifconfig wlan0 down". The reason is because ar->regd_update_work is ran once, and it is will call wiphy_lock(ar->hw->wiphy) in function ath11k_regd_update() which is running in workqueue of ieee80211_local queued by ieee80211_queue_work(). Another thread from "ifconfig wlan0 down" will also accuqire the lock by wiphy_lock(sdata->local->hw.wiphy) in function ieee80211_stop(), and then it call ieee80211_stop_device() to flush_workqueue(local->workqueue), this will wait the workqueue of ieee80211_local finished. Then deadlock will happen easily if the two thread run meanwhile. Below warning disappeared after this change. [ 914.088798] ath11k_pci 0000:05:00.0: mac remove interface (vdev 0) [ 914.088806] ath11k_pci 0000:05:00.0: mac stop 11d scan [ 914.088810] ath11k_pci 0000:05:00.0: mac stop 11d vdev id 0 [ 914.088827] ath11k_pci 0000:05:00.0: htc ep 2 consumed 1 credits (total 0) [ 914.088841] ath11k_pci 0000:05:00.0: send 11d scan stop vdev id 0 [ 914.088849] ath11k_pci 0000:05:00.0: htc insufficient credits ep 2 required 1 available 0 [ 914.088856] ath11k_pci 0000:05:00.0: htc insufficient credits ep 2 required 1 available 0 [ 914.096434] ath11k_pci 0000:05:00.0: rx ce pipe 2 len 16 [ 914.096442] ath11k_pci 0000:05:00.0: htc ep 2 got 1 credits (total 1) [ 914.096481] ath11k_pci 0000:05:00.0: htc ep 2 consumed 1 credits (total 0) [ 914.096491] ath11k_pci 0000:05:00.0: WMI vdev delete id 0 [ 914.111598] ath11k_pci 0000:05:00.0: rx ce pipe 2 len 16 [ 914.111628] ath11k_pci 0000:05:00.0: htc ep 2 got 1 credits (total 1) [ 914.114659] ath11k_pci 0000:05:00.0: rx ce pipe 2 len 20 [ 914.114742] ath11k_pci 0000:05:00.0: htc rx completion ep 2 skb pK-error [ 914.115977] ath11k_pci 0000:05:00.0: vdev delete resp for vdev id 0 [ 914.116685] ath11k_pci 0000:05:00.0: vdev 00:03:7f:29:61:11 deleted, vdev_id 0 [ 914.117583] ====================================================== [ 914.117592] WARNING: possible circular locking dependency detected [ 914.117600] 5.16.0-rc1-wt-ath+ #1 Tainted: G OE [ 914.117611] ------------------------------------------------------ [ 914.117618] ifconfig/2805 is trying to acquire lock: [ 914.117628] ffff9c00a62bb548 ((wq_completion)phy0){+.+.}-{0:0}, at: flush_workqueue+0x87/0x470 [ 914.117674] but task is already holding lock: [ 914.117682] ffff9c00baea07d0 (&rdev->wiphy.mtx){+.+.}-{4:4}, at: ieee80211_stop+0x38/0x180 [mac80211] [ 914.117872] which lock already depends on the new lock. [ 914.117880] the existing dependency chain (in reverse order) is: [ 914.117888] -> #3 (&rdev->wiphy.mtx){+.+.}-{4:4}: [ 914.117910] __mutex_lock+0xa0/0x9c0 [ 914.117930] mutex_lock_nested+0x1b/0x20 [ 914.117944] reg_process_self_managed_hints+0x3a/0xb0 [cfg80211] [ 914.118093] wiphy_regulatory_register+0x47/0x80 [cfg80211] [ 914.118229] wiphy_register+0x84f/0x9c0 [cfg80211] [ 914.118353] ieee80211_register_hw+0x6b1/0xd90 [mac80211] [ 914.118486] ath11k_mac_register+0x6af/0xb60 [ath11k] [ 914.118550] ath11k_core_qmi_firmware_ready+0x383/0x4a0 [ath11k] [ 914.118598] ath11k_qmi_driver_event_work+0x347/0x4a0 [ath11k] [ 914.118656] process_one_work+0x228/0x670 [ 914.118669] worker_thread+0x4d/0x440 [ 914.118680] kthread+0x16d/0x1b0 [ 914.118697] ret_from_fork+0x22/0x30 [ 914.118714] -> #2 (rtnl_mutex){+.+.}-{4:4}: [ 914.118736] __mutex_lock+0xa0/0x9c0 [ 914.118751] mutex_lock_nested+0x1b/0x20 [ 914.118767] rtnl_lock+0x17/0x20 [ 914.118783] ath11k_regd_update+0x15a/0x260 [ath11k] [ 914.118841] ath11k_regd_update_work+0x15/0x20 [ath11k] [ 914.118897] process_one_work+0x228/0x670 [ 914.118909] worker_thread+0x4d/0x440 [ 914.118920] kthread+0x16d/0x1b0 [ 914.118934] ret_from_fork+0x22/0x30 [ 914.118948] -> #1 ((work_completion)(&ar->regd_update_work)){+.+.}-{0:0}: [ 914.118972] process_one_work+0x1fa/0x670 [ 914.118984] worker_thread+0x4d/0x440 [ 914.118996] kthread+0x16d/0x1b0 [ 914.119010] ret_from_fork+0x22/0x30 [ 914.119023] -> #0 ((wq_completion)phy0){+.+.}-{0:0}: [ 914.119045] __lock_acquire+0x146d/0x1cf0 [ 914.119057] lock_acquire+0x19b/0x360 [ 914.119067] flush_workqueue+0xae/0x470 [ 914.119084] ieee80211_stop_device+0x3b/0x50 [mac80211] [ 914.119260] ieee80211_do_stop+0x5d7/0x830 [mac80211] [ 914.119409] ieee80211_stop+0x45/0x180 [mac80211] [ 914.119557] __dev_close_many+0xb3/0x120 [ 914.119573] __dev_change_flags+0xc3/0x1d0 [ 914.119590] dev_change_flags+0x29/0x70 [ 914.119605] devinet_ioctl+0x653/0x810 [ 914.119620] inet_ioctl+0x193/0x1e0 [ 914.119631] sock_do_ioctl+0x4d/0xf0 [ 914.119649] sock_ioctl+0x262/0x340 [ 914.119665] __x64_sys_ioctl+0x96/0xd0 [ 914.119678] do_syscall_64+0x3d/0xd0 [ 914.119694] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 914.119709] other info that might help us debug this: [ 914.119717] Chain exists of: (wq_completion)phy0 --> rtnl_mutex --> &rdev->wiphy.mtx [ 914.119745] Possible unsafe locking scenario: [ 914.119752] CPU0 CPU1 [ 914.119758] ---- ---- [ 914.119765] lock(&rdev->wiphy.mtx); [ 914.119778] lock(rtnl_mutex); [ 914.119792] lock(&rdev->wiphy.mtx); [ 914.119807] lock((wq_completion)phy0); [ 914.119819] *** DEADLOCK *** [ 914.119827] 2 locks held by ifconfig/2805: [ 914.119837] #0: ffffffffba3dc010 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_lock+0x17/0x20 [ 914.119872] #1: ffff9c00baea07d0 (&rdev->wiphy.mtx){+.+.}-{4:4}, at: ieee80211_stop+0x38/0x180 [mac80211] [ 914.120039] stack backtrace: [ 914.120048] CPU: 0 PID: 2805 Comm: ifconfig Tainted: G OE 5.16.0-rc1-wt-ath+ #1 [ 914.120064] Hardware name: LENOVO 418065C/418065C, BIOS 83ET63WW (1.33 ) 07/29/2011 [ 914.120074] Call Trace: [ 914.120084] <TASK> [ 914.120094] dump_stack_lvl+0x73/0xa4 [ 914.120119] dump_stack+0x10/0x12 [ 914.120135] print_circular_bug.isra.44+0x221/0x2e0 [ 914.120165] check_noncircular+0x106/0x150 [ 914.120203] __lock_acquire+0x146d/0x1cf0 [ 914.120215] ? __lock_acquire+0x146d/0x1cf0 [ 914.120245] lock_acquire+0x19b/0x360 [ 914.120259] ? flush_workqueue+0x87/0x470 [ 914.120286] ? lockdep_init_map_type+0x6b/0x250 [ 914.120310] flush_workqueue+0xae/0x470 [ 914.120327] ? flush_workqueue+0x87/0x470 [ 914.120344] ? lockdep_hardirqs_on+0xd7/0x150 [ 914.120391] ieee80211_stop_device+0x3b/0x50 [mac80211] [ 914.120565] ? ieee80211_stop_device+0x3b/0x50 [mac80211] [ 914.120736] ieee80211_do_stop+0x5d7/0x830 [mac80211] [ 914.120906] ieee80211_stop+0x45/0x180 [mac80211] [ 914.121060] __dev_close_many+0xb3/0x120 [ 914.121081] __dev_change_flags+0xc3/0x1d0 [ 914.121109] dev_change_flags+0x29/0x70 [ 914.121131] devinet_ioctl+0x653/0x810 [ 914.121149] ? __might_fault+0x77/0x80 [ 914.121179] inet_ioctl+0x193/0x1e0 [ 914.121194] ? inet_ioctl+0x193/0x1e0 [ 914.121218] ? __might_fault+0x77/0x80 [ 914.121238] ? _copy_to_user+0x68/0x80 [ 914.121266] sock_do_ioctl+0x4d/0xf0 [ 914.121283] ? inet_stream_connect+0x60/0x60 [ 914.121297] ? sock_do_ioctl+0x4d/0xf0 [ 914.121329] sock_ioctl+0x262/0x340 [ 914.121347] ? sock_ioctl+0x262/0x340 [ 914.121362] ? exit_to_user_mode_prepare+0x13b/0x280 [ 914.121388] ? syscall_enter_from_user_mode+0x20/0x50 [ 914.121416] __x64_sys_ioctl+0x96/0xd0 [ 914.121430] ? br_ioctl_call+0x90/0x90 [ 914.121445] ? __x64_sys_ioctl+0x96/0xd0 [ 914.121465] do_syscall_64+0x3d/0xd0 [ 914.121482] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 914.121497] RIP: 0033:0x7f0ed051737b [ 914.121513] Code: 0f 1e fa 48 8b 05 15 3b 0d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d e5 3a 0d 00 f7 d8 64 89 01 48 [ 914.121527] RSP: 002b:00007fff7be38b98 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [ 914.121544] RAX: ffffffffffffffda RBX: 00007fff7be38ba0 RCX: 00007f0ed051737b [ 914.121555] RDX: 00007fff7be38ba0 RSI: 0000000000008914 RDI: 0000000000000004 [ 914.121566] RBP: 00007fff7be38c60 R08: 000000000000000a R09: 0000000000000001 [ 914.121576] R10: 0000000000000000 R11: 0000000000000202 R12: 00000000fffffffe [ 914.121586] R13: 0000000000000004 R14: 0000000000000000 R15: 0000000000000000 [ 914.121620] </TASK> Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211201071745.17746-2-quic_wgong@quicinc.com
2021-12-08omapdrm: dss: mark runtime PM functions __maybe_unusedArnd Bergmann4-8/+8
Using the SET_RUNTIME_PM_OPS() macro causes a warning about the referenced functions when they are marked static but not __maybe_unused: drivers/gpu/drm/omapdrm/dss/dss.c:1572:12: error: unused function 'dss_runtime_suspend' [-Werror,-Wunused-function] drivers/gpu/drm/omapdrm/dss/dss.c:1584:12: error: unused function 'dss_runtime_resume' [-Werror,-Wunused-function] drivers/gpu/drm/omapdrm/dss/dispc.c:4845:12: error: unused function 'dispc_runtime_suspend' [-Werror,-Wunused-function] drivers/gpu/drm/omapdrm/dss/dispc.c:4860:12: error: unused function 'dispc_runtime_resume' [-Werror,-Wunused-function] Fixes: b92f7ea556f8 ("drm/omap: dss: Make use of the helper macro SET_RUNTIME_PM_OPS()") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211205131612.3192652-1-arnd@kernel.org
2021-12-08drm/omap: Add a 'right overlay' to plane stateBenoit Parrot7-12/+267
If the drm_plane has a source width that's greater than the max width supported by a single hw overlay, then we assign a 'r_overlay' to it in omap_plane_atomic_check(). Both overlays should have the capabilities required to handle the source framebuffer. The only parameters that vary between the left and right hwoverlays are the src_w, crtc_w, src_x and crtc_x as we just even chop the fb into left and right halves. We also take care of not creating odd width size when dealing with YUV formats. Since both halves need to be 'appear' side by side the zpos is recalculated when dealing with dual overlay cases so that the other planes zpos is consistent. Depending on user space usage it is possible that on occasion the number of requested planes exceeds the numbers of overlays required to display them. In that case a failure would be returned for the plane that cannot be handled at that time. It is up to user space to make sure the H/W resource are not over-subscribed. Signed-off-by: Benoit Parrot <bparrot@ti.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211117141928.771082-10-narmstrong@baylibre.com
2021-12-08drm/omap: add plane_atomic_print_state supportBenoit Parrot1-0/+14
Now that we added specific item to our subclassed drm_plane_state we can add omap_plane_atomic_print_state() helper to dump out our own driver specific plane state. Signed-off-by: Benoit Parrot <bparrot@ti.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211117141928.771082-9-narmstrong@baylibre.com
2021-12-08drm/omap: dynamically assign hw overlays to planesBenoit Parrot4-23/+220
(re)assign the hw overlays to planes based on required caps, and to handle situations where we could not modify an in-use plane. This means all planes advertise the superset of formats and properties. Userspace must (as always) use atomic TEST_ONLY step for atomic updates, as not all planes may be available for use on every frame. The mapping of hwoverlays to plane is stored in omap_global_state, so that state updates are atomically committed in the same way that plane/etc state updates are managed. This is needed because the omap_plane_state keeps a pointer to the hwoverlay, and we don't want global state to become out of sync with the plane state if an atomic update fails, we hit deadlock/ backoff scenario, etc. The use of global_state_lock keeps multiple parallel updates which both re-assign hwoverlays properly serialized. Signed-off-by: Benoit Parrot <bparrot@ti.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211117141928.771082-8-narmstrong@baylibre.com
2021-12-08drm/omap: Add global state as a private atomic objectBenoit Parrot2-3/+105
Global shared resources (like hw overlays) for omapdrm are implemented as a part of atomic state using the drm_private_obj infrastructure available in the atomic core. omap_global_state is introduced as a drm atomic private object. The two funcs omap_get_global_state() and omap_get_existing_global_state() are the two variants that will be used to access omap_global_state. drm_mode_config_init() needs to be called earlier because it creates/initializes the private_obj link list maintained by the atomic framework. The private_obj link list has to exist prior to calling drm_atomic_private_obj_init(). Similarly the cleanup handler are reordered appropriately. Signed-off-by: Benoit Parrot <bparrot@ti.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211117141928.771082-7-narmstrong@baylibre.com
2021-12-08drm/omap: omap_plane: subclass drm_plane_stateBenoit Parrot1-3/+33
In preparation to add omap plane state specific extensions we need to subclass drm_plane_state and add the relevant helpers. The addition of specific extension will be done separately. Signed-off-by: Benoit Parrot <bparrot@ti.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211117141928.771082-6-narmstrong@baylibre.com
2021-12-08drm/omap: introduce omap_hw_overlayBenoit Parrot6-34/+148
Split out the hardware overlay specifics from omap_plane. To start, the hw overlays are statically assigned to planes. The goal is to eventually assign hw overlays dynamically to planes during plane->atomic_check() based on requested caps (scaling, YUV, etc). And then perform hw overlay re-assignment if required. Signed-off-by: Benoit Parrot <bparrot@ti.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211117141928.771082-5-narmstrong@baylibre.com
2021-12-08drm/omap: Add ovl checking funcs to dispc_opsBenoit Parrot2-2/+10
In order to be able to dynamically assign overlays to planes we need to be able to asses the overlay capabilities. Add a helper function to be able to retrieve the supported capabilities of an overlay. And export the function to check if a fourcc is supported on a given overlay. Signed-off-by: Benoit Parrot <bparrot@ti.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211117141928.771082-4-narmstrong@baylibre.com
2021-12-08drm/omap: Add ability to check if requested plane modes can be supportedBenoit Parrot3-0/+38
We currently assume that an overlay has the same maximum width and maximum height as the overlay manager. This assumption is incorrect. On some variants the overlay manager maximum width is twice the maximum width that the overlay can handle. We need to add the appropriate data per variant as well as export a helper function to retrieve the data so check can be made dynamically in omap_plane_atomic_check(). Signed-off-by: Benoit Parrot <bparrot@ti.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211117141928.771082-3-narmstrong@baylibre.com
2021-12-08drm/omap: add sanity plane state checkNeil Armstrong1-0/+15
Call drm_atomic_helper_check_plane_state() from the plane atomic_check() callback in order to add plane state sanity checking. It will permit filtering out totally bad scaling factors, even if the real check are done later in the atomic commit. Calling drm_atomic_helper_check_plane_state() also sets plane_state->visible which will be useful when dynamically assigning hw overlays to planes. Signed-off-by: Benoit Parrot <bparrot@ti.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211117141928.771082-2-narmstrong@baylibre.com
2021-12-08drm: omapdrm: Export correct scatterlist for TILER backed BOsIvaylo Dimitrov3-30/+85
Memory of BOs backed by TILER is not contiguous, but omap_gem_map_dma_buf() exports it like it is. This leads to (possibly) invalid memory accesses if another device imports such a BO. Fix that by providing sg that correctly describes TILER memory layout. Align TILER allocations to page, so importer to be able to correctly set its MMU if have one. Set export size accounting for the alignment. Also, make sure to destroy sg on unpin, as it is no longer valid. Tested on Motorola Droid4 by using GPU (sgx540) to render. Suggested-by: Matthijs van Duin <matthijsvanduin@gmail.com> Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/1637309180-31032-1-git-send-email-ivo.g.dimitrov.75@gmail.com
2021-12-07s390/qeth: remove check for packing mode in qeth_check_outbound_queue()Julian Wiedmann1-4/+1
If qeth_check_outbound_queue() finds a partially filled TX buffer on the queue and flushes it, then the queue _must_ have been in packing mode. Remove the redundant check when updating the relevant statistics. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-07s390/qeth: fine-tune .ndo_select_queue()Julian Wiedmann4-30/+22
Avoid a conditional branch for L2 devices when selecting the TX queue, and have shared logic for OSA devices. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-07s390/qeth: don't offer .ndo_bridge_* ops for OSA devicesJulian Wiedmann1-2/+0
qeth_l2_detect_dev2br_support() will only set brport_hw_features for IQD devices. So qeth_l2_bridge_getlink() and qeth_l2_bridge_setlink() will always return -EOPNOTSUPP on OSA devices. Just don't offer these callbacks instead. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.