| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
PLANE_CUS_CTL has a restriction of 4096 width even though
PLANE_SIZE and scaler size registers supports max 5120.
Take care of this restriction in max_width.
Without this patch, when 5k content is sent on HDR plane
with NV12 content, FIFO underrun is seen and screen blanks
out.
v2: Addressed review comments from Ville. Added separate
functions for max_width - for HDR and SDR
v3: Addressed review comments from Ville. Changed names of
HDR and SDR max_width functions to icl_hdr_plane_max_width
and icl_sdr_plane_max_width
v4: Fixed paranthesis alignment. No code change
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
[vsyrjala: Fix alignment]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211202110836.17536-1-vidya.srinivas@intel.com
|
|
The lan966x is using the function 'packing' to create/extract the
information for the IFH, that is used to be added in front of the frames
when they are injected/extracted.
Therefore update the Kconfig to select config option 'PACKING' whenever
lan966x driver is enabled.
Fixes: db8bcaad539314 ("net: lan966x: add the basic lan966x driver")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Instead of printing numbers of protocol IDs and rammod commands,
enhance debug prints to provide names. s_protocol_types[] and
s_ramrod_cmd_ids arrays[] are added to support along with APIs.
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Alok Prasad <palok@marvell.com>
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The blamed commit generates the following smatch static checker warning:
drivers/net/ethernet/microchip/lan966x/lan966x_main.c:515 lan966x_xtr_irq_handler()
warn: duplicate check 'sz < 0' (previous on line 502)
This patch fixes this issue removing the duplicate check 'sz < 0'
Fixes: d28d6d2e37d10d ("net: lan966x: add port module support")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When trying to decide whether or not reuse existing rx/tx pools
we tried to allow a range of values for the pool parameters rather
than exact matches. This was intended to reuse the resources for
instance when switching between two VIO servers with different
default parameters.
But this optimization is incomplete and breaks when we try to
change the number of queues for instance. The optimization needs
to be updated, so drop it for now and simplify the code.
Fixes: bbd809305bc7 ("ibmvnic: Reuse tx pools when possible")
Reported-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Reviewed-by: Rick Lindsley <ricklind@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When trying to decide whether or not reuse existing rx/tx pools
we tried to allow a range of values for the pool parameters rather
than exact matches. This was intended to reuse the resources for
instance when switching between two VIO servers with different
default parameters.
But this optimization is incomplete and breaks when we try to
change the number of queues for instance. The optimization needs
to be updated, so drop it for now and simplify the code.
Fixes: 489de956e7a2 ("ibmvnic: Reuse rx pools when possible")
Reported-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Reviewed-by: Rick Lindsley <ricklind@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Apple M1 Mac minis (2020) with 10GE NICs do not have MAC address in the
card, but instead need to obtain MAC addresses from the device tree. In
this case the hardware will report an invalid MAC.
Currently atlantic driver does not query the DT for MAC address and will
randomly assign a MAC if the NIC doesn't have a permanent MAC burnt in.
This patch causes the driver to perfer a valid MAC address from OF (if
present) over HW self-reported MAC and only fall back to a random MAC
address when neither of them is valid.
Signed-off-by: Tianhao Chai <cth451@gmail.com>
Reviewed-by: Igor Russkikh <irusskikh@marvell.com>
Reviewed-by: Hector Martin <marcan@marcan.st>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On some AMD hardware laptops, the system fails communicating with the
PMC when entering s2idle and the machine is battery powered.
Hardware description: HP Pavilion Aero Laptop 13-be0097nr
CPU: AMD Ryzen 7 5800U with Radeon Graphics
GPU: 03:00.0 VGA compatible controller [0300]: Advanced Micro Devices,
Inc. [AMD/ATI] Device [1002:1638] (rev c1)
Detailed description of the problem (and investigation) here:
https://gitlab.freedesktop.org/drm/amd/-/issues/1799
Patch is a single line: reduce the polling delay in half, from 100uSec
to 50uSec when waiting for a change in state from the PMC after a
write command operation.
After changing the delay, I did not see a single failure on this
machine (I have this fix for now more than one week and s2idle worked
every single time on battery power).
Cc: stable@vger.kernel.org
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Fabrizio Bertocci <fabriziobertocci@gmail.com>
Link: https://lore.kernel.org/r/CADtzkx7TdfbwtaVEXUdD6YXPey52E-nZVQNs+Z41DTx7gqMqtw@mail.gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The TrekStor SurfTab duo W1 (ST10432-10b) has a Goodix touchscreen which
has its x-axis mirrored.
Add a quirk to fix this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211124175125.250329-1-hdegoede@redhat.com
|
|
LG uses 5 instead of 0 in the third digit (second digit after 2019)
of the year string to indicate newer models in the same year.
Handle this case as well.
Signed-off-by: Matan Ziv-Av <matan@svgalib.org>
Link: https://lore.kernel.org/r/c752b3b2-9718-bd9a-732d-e165aa8a1fca@svgalib.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Eliminate the following coccicheck warning:
./drivers/platform/x86/asus-wmi.c:2386:2-3: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/1637719332-45224-1-git-send-email-yang.lee@linux.alibaba.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
There have been various bugs / forum threads about allowing control of
the LED in the ThinkPad logo on the lid of various models.
This seems to be something which users want to control and there really
is no reason to require setting CONFIG_THINKPAD_ACPI_UNSAFE_LEDS for this.
The lid-logo-dot is LED number 10, so change the name of the 10th led
from unknown_led2 to lid_logo_dot and add it to the TPACPI_SAFE_LEDS mask.
Link: https://www.reddit.com/r/thinkpad/comments/7n8eyu/thinkpad_led_control_under_gnulinux/
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1943318
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211123210524.266705-2-hdegoede@redhat.com
|
|
Add the LED_RETAIN_AT_SHUTDOWN flag to the registered led_class_devs so
that the LEDs do not get turned-off when reloading the driver and thus so
that they also stay under default EC control when reloading the driver,
unless explicitly overridden by the user.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211123210524.266705-1-hdegoede@redhat.com
|
|
Currently hns3_get_vector_ring_chain() is a bit long. Refactor it by
extracting sub process to improve the readability.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently hclge_set_channels() is a bit long. Refactor it by extracting
sub process to improve the readability.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently hclge_configure() is a bit long. Refactor it by extracting sub
process to improve the readability.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently the function hclge_update_port_base_vlan_cfg() is a
bit long. Split it to several small functions, to improve the
readability.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Function hns3_nic_net_xmit() is a bit too long. So add a
new function hns3_handle_skb_desc() to simplify code and improve
code readability.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently the function hclge_get_fd_rule_info() is a bit long.
Split it to several small functions, to improve readability.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently the function hclge_init_vlan_config() is a bit long.
Split it to several small functions, to simplify code and
improve code readability.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The function hns3_fill_skb_desc is hard to read, this patch
extract 2 functions and add new a struct data to simplify the
code and Improve readability.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As the code to update ring stats is alike for different ring stats
type, this patch extract macro to simplify ring stats update code.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are only three call sites remaining for
intel_wait_for_vblank(). Remove the function, and open code it to avoid
new users from showing up.
v2:
- Use intel_crtc_wait_for_next_vblank() (Ville)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/aabcda1208072a732d7796e6dacce37dca9bb843.1638366969.git.jani.nikula@intel.com
|
|
The "get" in the name implies reference counting, remove it. This also
makes the function conform to naming style.
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/50359b38c0eabe262ff31c9ec35c97aa5dfb7fef.1638366969.git.jani.nikula@intel.com
|
|
The "get" in the name implies reference counting, remove it. This also
makes the function conform to naming style.
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6105d0ff44efac3c999af6382e4b0729e251f1e1.1638366969.git.jani.nikula@intel.com
|
|
GEM helper libraries use struct drm_driver.gem_create_object to let
drivers override GEM object allocation. On failure, the call returns
NULL.
Change the semantics to make the calls return a pointer-encoded error.
This aligns the callback with its callers. Fixes the ingenic driver,
which already returns an error pointer.
Also update the callers to handle the involved types more strictly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Steven Price <steven.price@arm.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211130095255.26710-1-tzimmermann@suse.de
|
|
The i.MX 8MP has a ADC_PD bit in the TMU_TER register that controls the
operating mode of the ADC:
* 0 means normal operating mode
* 1 means power down mode
When enabling/disabling the TMU, the ADC operating mode must be set
accordingly.
i.MX 8M Mini & Nano are lacking this bit.
Signed-off-by: Paul Gerber <Paul.Gerber@tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Fixes: 2b8f1f0337c5 ("thermal: imx8mm: Add i.MX8MP support")
Link: https://lore.kernel.org/r/20211122114225.196280-1-alexander.stein@ew.tq-group.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Disable the PCIe PHY when unbinding driver. This should save some power.
Link: https://lore.kernel.org/r/20211130172913.9727-12-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
|
|
Disable link training circuit in driver unbind sequence. We want to
leave link training in the same state as it was before the driver was
probed.
Link: https://lore.kernel.org/r/20211130172913.9727-11-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
|
|
Put the PCIe card into reset by asserting PERST# signal when unbinding
driver. It doesn't make sense to leave the card working if it can't
communicate with the host. This should also save some power.
Link: https://lore.kernel.org/r/20211130172913.9727-10-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
|
|
Free config space for emulated root bridge when unbinding driver to fix
memory leak. Do it after disabling and masking all interrupts, since
aardvark interrupt handler accesses config space of emulated root
bridge.
Link: https://lore.kernel.org/r/20211130172913.9727-9-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
|
|
Ensure that no interrupt can be triggered after driver unbind.
Link: https://lore.kernel.org/r/20211130172913.9727-8-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
|
|
Ensure that after driver unbind PCIe cards are not able to forward
memory and I/O requests in the upstream direction.
Link: https://lore.kernel.org/r/20211130172913.9727-7-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
|
|
Add two more comments into the advk_pcie_remove() method.
Link: https://lore.kernel.org/r/20211130172913.9727-6-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
|
|
We already clear all the other interrupts (ISR0, ISR1, HOST_CTRL_INT).
Define a new macro PCIE_MSI_ALL_MASK and do the same clearing for MSIs,
to ensure that we don't start receiving spurious interrupts.
Use this new mask in advk_pcie_handle_msi();
Link: https://lore.kernel.org/r/20211130172913.9727-5-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
|
|
PCI aardvark hardware supports access to DEVCAP2, DEVCTL2, LNKCAP2 and
LNKCTL2 configuration registers of PCIe core via PCIE_CORE_PCIEXP_CAP.
Export them via emulated software root bridge.
Link: https://lore.kernel.org/r/20211130172913.9727-4-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
|
|
pci-bridge-emul driver already allocates buffer for capabilities up to the
PCI_EXP_SLTSTA2 register, but does not define bit access behavior for these
registers. Add these missing definitions.
Link: https://lore.kernel.org/r/20211130172913.9727-3-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
|
|
The current assignment to the class_revision member
class_revision |= cpu_to_le32(PCI_CLASS_BRIDGE_PCI << 16);
can make the reader think that class is at high 16 bits of the member and
revision at low 16 bits.
In reality, class is at high 24 bits, but the class for PCI Bridge Normal
Decode is PCI_CLASS_BRIDGE_PCI << 8.
Change the assignment and add a comment to make this clearer.
Link: https://lore.kernel.org/r/20211130172913.9727-2-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
|
|
On imx6 and perhaps others when pcie probes you get a:
imx6q-pcie 33800000.pcie: invalid resource
This occurs because the atu is not specified in the DT and as such it
should not be remapped.
Link: https://lore.kernel.org/r/20211101180243.23761-1-tharvey@gateworks.com
Fixes: 281f1f99cf3a ("PCI: dwc: Detect number of iATU windows")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
|
|
intel_wait_for_vblank() goes through a pipe to crtc lookup, while in
most cases we already have the crtc available. Avoid the extra lookups
by adding an intel_crtc based helper.
v2:
- Add intel_crtc_wait_for_next_vblank() helper (Ville)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/90cfbd8c3e79a742b0ee9e3ae75493acb0785dbb.1638366969.git.jani.nikula@intel.com
|
|
According to ARM(v7M) ARM Interrupt Priority Offsets located at
0xE000E400-0xE000E5EC, while 0xE000E300-0xE000E33C covers read-only
Interrupt Active Bit Registers
Fixes: 292ec080491d ("irqchip: Add support for ARMv7-M NVIC")
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211201110259.84857-1-vladimir.murzin@arm.com
|
|
Currently the driver is supporting only the interfaces QSGMII, SGMII,
RGMII and GMII. This patch extend the supported interfaces with
1000BASE-X and 2500BASE-X.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20211130101015.164916-1-horatiu.vultur@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
There is a error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Link: https://lore.kernel.org/r/1637822289-24534-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
coccinelle report：
./drivers/ata/libata-sata.c:830:8-16:
WARNING: use scnprintf or sprintf
Use sysfs_emit instead of scnprintf or sprintf makes more sense.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Yang Guang <yang.guang5@zte.com.cn>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
This reverts commit 239edf686c14a9ff926dec2f350289ed7adfefe2.
239edf686c14 ("PCI: aardvark: Fix support for PCI_ROM_ADDRESS1 on emulated
bridge") added support for the Type 1 Expansion ROM BAR at config offset
0x38, based on the register being listed in the Marvell Armada A3720 spec.
But the spec doesn't document it at all for RC mode, and there is no ROM in
the SOC, so remove this emulation for now.
The PCI bridge which represents aardvark's PCIe Root Port has an Expansion
ROM Base Address register at offset 0x30, but its meaning is different than
PCI's Expansion ROM BAR register, although the layout is the same. (This
is why we thought it does the same thing.)
First: there is no ROM (or part of BootROM) in the A3720 SOC dedicated for
PCIe Root Port (or controller in RC mode) containing executable code that
would initialize the Root Port, suitable for execution in bootloader (this
is how Expansion ROM BAR is used on x86).
Second: in A3720 spec the register (address 0xD0070030) is not documented
at all for Root Complex mode, but similar to other BAR registers, it has an
"entangled partner" in register 0xD0075920, which does address translation
for the BAR in 0xD0070030:
- the BAR register sets the address from the view of PCIe bus
- the translation register sets the address from the view of the CPU
The other BAR registers also have this entangled partner, and they can be
used to:
- in RC mode: address-checking on the receive side of the RC (they can
define address ranges for memory accesses from remote Endpoints to the
RC)
- in Endpoint mode: allow the remote CPU to access memory on A3720
The Expansion ROM BAR has only the Endpoint part documented, but from the
similarities we think that it can also be used in RC mode in that way.
So either Expansion ROM BAR has different meaning (if the hypothesis above
is true), or we don't know it's meaning (since it is not documented for RC
mode).
Remove the register from the emulated bridge accessing functions.
[bhelgaas: summarize reason for removal (first paragraph)]
Fixes: 239edf686c14 ("PCI: aardvark: Fix support for PCI_ROM_ADDRESS1 on emulated bridge")
Link: https://lore.kernel.org/r/20211125160148.26029-3-kabel@kernel.org
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
|
|
In rvu_mbox_init(), mbox_regions is not freed or passed out
under the switch-default region, which could lead to a memory leak.
Fix this bug by changing 'return err' to 'goto free_regions'.
This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.
Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.
Builds with CONFIG_OCTEONTX2_AF=y show no new warnings,
and our static analyzer no longer warns about this code.
Fixes: 98c561116360 (“octeontx2-af: cn10k: Add mbox support for CN10K platform”)
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Link: https://lore.kernel.org/r/20211130165039.192426-1-zhou1615@umn.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In mlx4_en_try_alloc_resources(), mlx4_en_copy_priv() is called and
tmp->tx_cq will be freed on the error path of mlx4_en_copy_priv().
After that mlx4_en_alloc_resources() is called and there is a dereference
of &tmp->tx_cq[t][i] in mlx4_en_alloc_resources(), which could lead to
a use after free problem on failure of mlx4_en_copy_priv().
Fix this bug by adding a check of mlx4_en_copy_priv()
This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.
Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.
Builds with CONFIG_MLX4_EN=m show no new warnings,
and our static analyzer no longer warns about this code.
Fixes: ec25bc04ed8e ("net/mlx4_en: Add resilience in low memory systems")
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20211130164438.190591-1-zhou1615@umn.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
IPCB/IP6CB need to be initialized when processing outbound v4 or v6 pkts
in the codepath of vrf device xmit function so that leftover garbage
doesn't cause futher code that uses the CB to incorrectly process the
pkt.
One occasion of the issue might occur when MPLS route uses the vrf
device as the outgoing device such as when the route is added using "ip
-f mpls route add <label> dev <vrf>" command.
The problems seems to exist since day one. Hence I put the day one
commits on the Fixes tags.
Fixes: 193125dbd8eb ("net: Introduce VRF device driver")
Fixes: 35402e313663 ("net: Add IPv6 support to VRF device")
Cc: stable@vger.kernel.org
Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20211130162637.3249-1-ssuryaextr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Program the 1ms autonegotiation clock divisor according to the clocking
rate of neta - without this, the 1ms clock ticks at about 660us on
Armada 38x configured for 250MHz. Bring this into correct specification.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/E1ms4WD-00EKLK-Ld@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Tidy up the disable bit clearing where we clear a bit
and then run the link resolver.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/E1ms4Rx-00EKEc-En@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
Vidya Srinivas
Horatiu Vultur
Prabhakar Kushwaha
Sukadev Bhattiprolu
Tianhao Chai
Fabrizio Bertocci
Hans de Goede
Matan Ziv-Av
Yang Li
Jie Wang
Jian Shen
Yufeng Mo
Peng Li
Jani Nikula
Thomas Zimmermann
Paul Gerber
Pali Rohár
Tim Harvey
Vladimir Murzin
Zou Wei
Yang Guang
Marek Behún
Zhou Qingyang
Stephen Suryaputra
Russell King