| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Populate the supported interfaces and MAC capabilities for the Lantiq
DSA switches and remove the old validate implementation to allow DSA to
use phylink_generic_validate() for this switch driver.
The exclusion of Gigabit linkmodes for MII, Reverse MII and Reduced MII
links is handled within phylink_generic_validate() in phylink, so there
is no need to make them conditional on the interface mode in the driver.
Reviewed-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Populate the supported interfaces and MAC capabilities for the
hellcreek DSA switch and remove the old validate implementation to
allow DSA to use phylink_generic_validate() for this switch driver.
The switch actually only supports MII and RGMII, but as phylib defaults
to GMII, we need to include this interface mode to keep existing DT
working.
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Tested-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In qlcnic_83xx_add_rings(), the indirect function of
ahw->hw_ops->alloc_mbx_args will be called to allocate memory for
cmd.req.arg, and there is a dereference of it in qlcnic_83xx_add_rings(),
which could lead to a NULL pointer dereference on failure of the
indirect function like qlcnic_83xx_alloc_mbx_args().
Fix this bug by adding a check of alloc_mbx_args(), this patch
imitates the logic of mbx_cmd()'s failure handling.
This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.
Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.
Builds with CONFIG_QLCNIC=m show no new warnings, and our
static analyzer no longer warns about this code.
Fixes: 7f9664525f9c ("qlcnic: 83xx memory map and HW access routine")
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Link: https://lore.kernel.org/r/20211130110848.109026-1-zhou1615@umn.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There's build error while CONFIG_REGMAP_MMIO is not set
and CONFIG_MDIO_MSCC_MIIM=m.
ERROR: modpost: "__devm_regmap_init_mmio_clk"
[drivers/net/mdio/mdio-mscc-miim.ko] undefined!
Add the depend of REGMAP_MMIO to fix it.
Fixes: a27a76282837 ("net: mdio: mscc-miim: convert to a regmap implementation")
Signed-off-by: Tianchen Ding <dtcccc@linux.alibaba.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20211130110209.804536-1-dtcccc@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
No concurrent access is possible when a bitmap is local to a function.
So prefer the non-atomic functions to save a few cycles.
- replace a 'for' loop by an equivalent non-atomic 'bitmap_fill()' call
- use '__set_bit()'
While at it, clear the 'bitmask' bitmap only when needed.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/3de0792f5088f00d135c835df6c19e63ae95f5d2.1638026251.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Zero-length and one-element arrays are deprecated, see
Documentation/process/deprecated.rst
Flexible-array members should be used instead.
Generated by: scripts/coccinelle/misc/flexible_array.cocci
CC: Joey Gouly <joey.gouly@arm.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Julia Lawall <julia.lawall@inria.fr>
Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2111271859250.2864@hadrien
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
All the other mtk_hw_get_value() calls have a check for "if (err)" so
we can add one here as well. This silences a Smatch warning:
drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c:819 mtk_pinconf_bias_get_rsel()
error: uninitialized symbol 'pd'.
Fixes: fb34a9ae383a ("pinctrl: mediatek: support rsel feature")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211127140836.GB24002@kili
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The "try_all_type" variable is not set if (hw->soc->pull_type) is false
leading to the following Smatch warning:
drivers/pinctrl/mediatek/pinctrl-paris.c:599 mtk_pctrl_show_one_pin()
error: uninitialized symbol 'try_all_type'.
Fixes: fb34a9ae383a ("pinctrl: mediatek: support rsel feature")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211127140750.GA24002@kili
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add the pinctrl driver support for i.MXRT1050.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20211125211443.1150135-5-Mr.Bossman075@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
GPIO nodes are not themselves busses, so passing rockchip_bank_match
here is wrong. Passing NULL instead uses the standard bus match table
which is more appropriate.
devm_of_platform_populate() shows that this is the normal way to call
of_platform_populate() from a device driver, so in order to match that
more closely also add the pinctrl device as the parent for the newly
created GPIO controllers.
Specifically, using the wrong match here can break dynamic GPIO hogs as
marking the GPIO bank as a bus means that of_platform_notify() will set
OF_POPULATED on new child nodes and if this happens before
of_gpio_notify() is called then the new hog will be skipped as
OF_POPULATED is already set.
Fixes: 9ce9a02039de ("pinctrl/rockchip: drop the gpio related codes")
Signed-off-by: John Keeping <john@metanate.com>
Link: https://lore.kernel.org/r/20211126151352.1509583-1-john@metanate.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Allow fully disabling CPU nodes using status = "fail".
This allows a bootloader to change the number of available CPUs (for
example when a common DTS is used for SoC variants with different numbers
of cores) without deleting the nodes altogether, which could require
additional fixups to avoid dangling phandle references.
Unknown status values (everything that is not "okay"/"ok", "disabled" or
"fail"/"fail-...") will continue to be interpreted like "disabled",
meaning that the CPU can be enabled during boot.
References:
- https://www.spinics.net/lists/devicetree-spec/msg01007.html
- https://github.com/devicetree-org/dt-schema/pull/61
Link: https://lore.kernel.org/all/CAL_Jsq+1LsTBdVaODVfmB0eme2jMpNL4VgKk-OM7rQWyyF0Jbw@mail.gmail.com/
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Tested-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Link: https://lore.kernel.org/r/20211122114536.2981-1-matthias.schiffer@ew.tq-group.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
drm/i915 feature pull for v5.17:
Features and functionality:
- Implement per-lane DP drive settings for ICL+ (Ville)
- Enable runtime pm autosuspend by default (Tilak Tangudu)
- ADL-P DSI support (Vandita)
- Add support for pipe C and D DMC firmware (Anusha)
- Implement (near)atomic gamma LUT updates via vblank workers (Ville)
- Split plane updates to noarm+arm phases (Ville)
- Remove the CCS FB stride restrictions on ADL-P (Imre)
- Add PSR selective fetch support for biplanar formats (Jouni)
- Add support for display audio codec keepalive (Kai)
- VRR platform support for display 11 (Manasi)
Refactoring and cleanups:
- FBC refactoring and cleanups preparing for multiple FBC instances (Ville)
- PCH modeset refactoring, move to its own file (Ville)
- Refactor and simplify handling of modifiers (Imre)
- PXP cleanups (Ville)
- Display header and include refactoring (Jani)
- Some register macro cleanups (Ville)
- Refactor DP HDMI DFP limit code (Ville)
Fixes:
- Disable DSB usage for now due to incorrect gamma LUT updates (Ville)
- Check async flip state of every crtc and plane only once (José)
- Fix DPT FB suspend/resume (Imre)
- Fix black screen on reboot due to disabled DP++ TMDS output buffers (Ville)
- Don't request GMBUS to generate irqs when called while irqs are off (Ville)
- Fix type1 DVI DP dual mode adapter heuristics for modern platforms (Ville)
- Fix fix integer overflow in 128b/132b data rate calculation (Jani)
- Fix bigjoiner state readout (Ville)
- Build fix for non-x86 (Siva)
- PSR fixes (José, Jouni, Ville)
- Disable ADL-P underrun recovery (José)
- Fix DP link parameter usage before valid DPCD (Imre)
- VRR vblank and frame counter fixes (Ville)
- Fix fastsets on TypeC ports following a non-blocking modeset (Imre)
- Compiler warning fixes (Nathan Chancellor)
- Fix DSI HS mode commands (William Tseng)
- Error return fixes (Dan Carpenter)
- Update memory bandwidth calculations (Radhakrishna)
- Implement WM0 cursor WA for DG2 (Stan)
- Fix DSI Double pixelclock on read-back for dual-link panels (Hans de Goede)
- HDMI 2.1 PCON FRL configuration fixes (Ankit)
Merges:
- DP link training delay helpers, via topic branch (Jani)
- Backmerge drm-next (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87v909it0t.fsf@intel.com
|
|
amd-drm-fixes-5.16-2021-12-01:
amdgpu:
- IP discovery based enumeration fixes
- vkms fixes
- DSC fixes for DP MST
- Audio fix for hotplug with tiled displays
- Misc display fixes
- DP tunneling fix
- DP fix
- Aldebaran fix
amdkfd:
- Locking fix
- Static checker fix
- Fix double free
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211201232802.5801-1-alexander.deucher@amd.com
|
|
msm misc fixes, build, display
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsV-ntO_u323XMKuD6bgbgvXporwi1sbyXwNDAuA52Afw@mail.gmail.com
|
|
Remove the unsed define in mtk_drm_ddp_comp.c
Signed-off-by: jason-jh.lin <jason-jh.lin@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
process_info->lock is used to protect kfd_bo_list, vm_list_head, n_vms
and userptr valid/inval list, svm_range_restore_work and
svm_range_set_attr don't access those, so do not need to take
process_info lock. This will avoid potential circular locking issue.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This change revert previous commits:
9f4f2c1a3524 ("drm/amd/amdgpu: fix the kfd pre_reset sequence in sriov")
271fd38ce56d ("drm/amdgpu: move kfd post_reset out of reset_sriov function")
This change moves the amdgpu_amdkfd_pre_reset to an earlier place
in amdgpu_device_reset_sriov, presumably to address the sequence issue
that the first patch was originally meant to fix.
Some register access(GRBM_GFX_CNTL) only be allowed on full access
mode. Move kfd_pre_reset and kfd_post_reset back inside reset_sriov
function.
Fixes: 9f4f2c1a3524 ("drm/amd/amdgpu: fix the kfd pre_reset sequence in sriov")
Fixes: 271fd38ce56d ("drm/amdgpu: move kfd post_reset out of reset_sriov function")
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
IGT bypass test will set crc source as DPRX,and display DM didn`t check
connection type, it run the test on the HDMI connector ,then the kernel
will be crashed because aux->transfer is set null for HDMI connection.
This patch will skip the invalid connection test and fix kernel crash issue.
[How]
Check the connector type while setting the pipe crc source as DPRX or
auto,if the type is not DP or eDP, the crtc crc source will not be set
and report error code to IGT test,IGT will show the this subtest as no
valid crtc/connector combinations found.
116.779714] [IGT] amd_bypass: starting subtest 8bpc-bypass-mode
[ 117.730996] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 117.731001] #PF: supervisor instruction fetch in kernel mode
[ 117.731003] #PF: error_code(0x0010) - not-present page
[ 117.731004] PGD 0 P4D 0
[ 117.731006] Oops: 0010 [#1] SMP NOPTI
[ 117.731009] CPU: 11 PID: 2428 Comm: amd_bypass Tainted: G OE 5.11.0-34-generic #36~20.04.1-Ubuntu
[ 117.731011] Hardware name: AMD CZN/, BIOS AB.FD 09/07/2021
[ 117.731012] RIP: 0010:0x0
[ 117.731015] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.
[ 117.731016] RSP: 0018:ffffa8d64225bab8 EFLAGS: 00010246
[ 117.731017] RAX: 0000000000000000 RBX: 0000000000000020 RCX: ffffa8d64225bb5e
[ 117.731018] RDX: ffff93151d921880 RSI: ffffa8d64225bac8 RDI: ffff931511a1a9d8
[ 117.731022] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 117.731023] CR2: ffffffffffffffd6 CR3: 000000010d5a4000 CR4: 0000000000750ee0
[ 117.731023] PKRU: 55555554
[ 117.731024] Call Trace:
[ 117.731027] drm_dp_dpcd_access+0x72/0x110 [drm_kms_helper]
[ 117.731036] drm_dp_dpcd_read+0xb7/0xf0 [drm_kms_helper]
[ 117.731040] drm_dp_start_crc+0x38/0xb0 [drm_kms_helper]
[ 117.731047] amdgpu_dm_crtc_set_crc_source+0x1ae/0x3e0 [amdgpu]
[ 117.731149] crtc_crc_open+0x174/0x220 [drm]
[ 117.731162] full_proxy_open+0x168/0x1f0
[ 117.731165] ? open_proxy_open+0x100/0x100
BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1546
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
drm_gem_object_put calls release_notify callback to free the mem
structure and unreserve_mem_limit, move it down after the last access
of mem and make it conditional call.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
To silence the following Smatch static checker warning:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_svm.c:2615
svm_range_restore_pages()
warn: missing error code here? 'get_task_mm()' failed. 'r' = '0'
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Certain USB4 docks do not seem to be able to handle disabling
DSC once it has been enabled on an MST stream. This can result
in blank displays.
[How]
As a work around, always enable DSC on docks exhibiting this issue. The
flag to indicate the use of DSC for MST streams on a USB4 dock is set
during detection of the dock and only cleared when the USB4 dock is
disconnected.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
It seems like after a series of plug/unplugs we end up in a situation
where tiled display doesnt support Audio.
[HOW]
The issue seems to be related to when we check streams changed after an
HPD, we should be checking the audio_struct as well to see if any of its
values changed.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Mustapha Ghaddar <mustapha.ghaddar@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
VS and PE requested by repeater should not persist for the sink.
[How]
Clear DPCD lane settings after repeater link training finishes.
Reviewed-by: Wesley Chalmers <wesley.chalmers@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: George Shen <George.Shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
When trying to lightup two 4k60 non-DSC displays behind a branch device
that supports DSC we can't lightup both at once due to bandwidth
limitations - each requires 48 VCPI slots but we only have 63.
[How]
The workaround already exists in the code but is guarded by a CONFIG
that cannot be set by the user and shouldn't need to be.
Check for specific branch device IDs to device whether to enable
the workaround for multiple display scenarios.
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
On aldebaran, RLC also controls GFXCLK. Skip halting RLC during GFX IP suspend
and keep it running till PMFW disables all DPMs.
[ 578.019986] amdgpu 0000:23:00.0: amdgpu: GPU reset begin!
[ 583.245566] amdgpu 0000:23:00.0: amdgpu: Failed to disable smu features.
[ 583.245621] amdgpu 0000:23:00.0: amdgpu: Fail to disable dpm features!
[ 583.245639] [drm:amdgpu_device_ip_suspend_phase2 [amdgpu]] *ERROR* suspend of IP block <smu> failed -62
[ 583.248504] [drm] free PSP TMR buffer
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There is no base reg offset or ip_version set for SDMA2
and SDMA3 on SIENNA_CICHLID, so add them.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Kevin Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
since vkms support atomic KMS interface
Signed-off-by: Flora Cui <flora.cui@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Acked-by: Alex Deucher <aleander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Flora Cui <flora.cui@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
for sriov odd# vf will modify vcn0 engine ip revision(due to multimedia bandwidth feature),
which will be mismatched with original vcn0 revision
[HOW]
add new version check for vcn0 disabled revision(3, 0, 192), typically modified under
sriov mode
Signed-off-by: Jane Jian <Jane.Jian@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
If the PF experiences an FLR, the VF's MSI and MSI-X configuration will
be conveniently and silently removed in the process. When this happens,
reset recovery will appear to complete normally but no traffic will
pass. The netdev watchdog will helpfully notify everyone of this issue.
To prevent such public embarrassment, restore MSI configuration at every
reset. For normal resets, this will do no harm, but for VF resets
resulting from a PF FLR, this will keep the VF working.
Fixes: 5eae00c57f5e ("i40evf: main driver core")
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The log messages talk about 'bus recovery' while it is not a bus
recovery with 9 pulses but merely a controller reset. Controller resets
are not worth log messages. The 'bus busy' message should be emitted by
upper layers, a busy bus may be expected in some cases.
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Reviewed-by: Alain Volmat <alain.volmat@foss.st.com>
|
|
amdgpu_ucode_get_load_type() does not interpret this parameter as
documented. It is ignored for many ASIC types (which presumably
only support one load_type), and when not ignored it is only used
to force direct loading instead of PSP loading. SMU loading is
only available for ASICs for which the parameter is ignored.
Signed-off-by: Yann Dirson <ydirson@free.fr>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Refactor userptr and pin_bo path to make it less confusing, move
err_pin_bo label up to remove mem from process_info kfd_bo_list.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
process_info->lock is used to protect kfd_bo_list, vm_list_head, n_vms
and userptr valid/inval list, svm_range_restore_work and
svm_range_set_attr don't access those, so do not need to take
process_info lock. This will avoid potential circular locking issue.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
With device_info initialization being handled in kfd_device_info_init,
these structs may be removed. Also add comments to help matching IP
versions to asic names.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Initializes kfd->device_info given either asic_type (enum) if GFX
version is less than GFX9, or GC IP version if greater. Also takes in vf
and the target compiler gfx version. Uses SDMA version to determine
num_sdma_queues_per_engine.
Convert device_info to a non-pointer member of kfd, change references
accordingly.
Change unsupported asic condition to only probe f2g, move device_info
initialization post-switch.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
device_info->asic_name and amdgpu_asic_name[adev->asic_type] both
provide asic name strings, with the only difference being casing.
Remove asic_name from device_info and replace sysfs entry with lowercase
amdgpu_asic_name[]. Ensures string is null-terminated so that this
doesn't break if dev->node_props.name ever gets set anywhere else.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Function stm32f7_i2c_release_bus is always returning 0, hence it
should be a void function. Update the function and remove the
return value error checking code in caller functions.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
This change revert previous commits:
9f4f2c1a3524 ("drm/amd/amdgpu: fix the kfd pre_reset sequence in sriov")
271fd38ce56d ("drm/amdgpu: move kfd post_reset out of reset_sriov function")
This change moves the amdgpu_amdkfd_pre_reset to an earlier place
in amdgpu_device_reset_sriov, presumably to address the sequence issue
that the first patch was originally meant to fix.
Some register access(GRBM_GFX_CNTL) only be allowed on full access
mode. Move kfd_pre_reset and kfd_post_reset back inside reset_sriov
function.
Fixes: 9f4f2c1a3524 ("drm/amd/amdgpu: fix the kfd pre_reset sequence in sriov")
Fixes: 271fd38ce56d ("drm/amdgpu: move kfd post_reset out of reset_sriov function")
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
IGT bypass test will set crc source as DPRX,and display DM didn`t check
connection type, it run the test on the HDMI connector ,then the kernel
will be crashed because aux->transfer is set null for HDMI connection.
This patch will skip the invalid connection test and fix kernel crash issue.
[How]
Check the connector type while setting the pipe crc source as DPRX or
auto,if the type is not DP or eDP, the crtc crc source will not be set
and report error code to IGT test,IGT will show the this subtest as no
valid crtc/connector combinations found.
116.779714] [IGT] amd_bypass: starting subtest 8bpc-bypass-mode
[ 117.730996] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 117.731001] #PF: supervisor instruction fetch in kernel mode
[ 117.731003] #PF: error_code(0x0010) - not-present page
[ 117.731004] PGD 0 P4D 0
[ 117.731006] Oops: 0010 [#1] SMP NOPTI
[ 117.731009] CPU: 11 PID: 2428 Comm: amd_bypass Tainted: G OE 5.11.0-34-generic #36~20.04.1-Ubuntu
[ 117.731011] Hardware name: AMD CZN/, BIOS AB.FD 09/07/2021
[ 117.731012] RIP: 0010:0x0
[ 117.731015] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.
[ 117.731016] RSP: 0018:ffffa8d64225bab8 EFLAGS: 00010246
[ 117.731017] RAX: 0000000000000000 RBX: 0000000000000020 RCX: ffffa8d64225bb5e
[ 117.731018] RDX: ffff93151d921880 RSI: ffffa8d64225bac8 RDI: ffff931511a1a9d8
[ 117.731022] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 117.731023] CR2: ffffffffffffffd6 CR3: 000000010d5a4000 CR4: 0000000000750ee0
[ 117.731023] PKRU: 55555554
[ 117.731024] Call Trace:
[ 117.731027] drm_dp_dpcd_access+0x72/0x110 [drm_kms_helper]
[ 117.731036] drm_dp_dpcd_read+0xb7/0xf0 [drm_kms_helper]
[ 117.731040] drm_dp_start_crc+0x38/0xb0 [drm_kms_helper]
[ 117.731047] amdgpu_dm_crtc_set_crc_source+0x1ae/0x3e0 [amdgpu]
[ 117.731149] crtc_crc_open+0x174/0x220 [drm]
[ 117.731162] full_proxy_open+0x168/0x1f0
[ 117.731165] ? open_proxy_open+0x100/0x100
BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1546
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
drm_gem_object_put calls release_notify callback to free the mem
structure and unreserve_mem_limit, move it down after the last access
of mem and make it conditional call.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
To silence the following Smatch static checker warning:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_svm.c:2615
svm_range_restore_pages()
warn: missing error code here? 'get_task_mm()' failed. 'r' = '0'
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This version brings along the following:
- FW promotion to 0.0.95
- DSC fixes for supported Docks
- Fixes eDP display issue
- Vendor LTTR workarounds
- Fixes Tiled display audio issue
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Bhawanpreet.Lakha <Bhawanpreet.Lakha@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Certain display configurations require an extra delay before
reading lane status with certain LTTPR.
[How]
Add temporary workaround to force AUX RD interval to
16ms for CR and EQ. Needs to be refactored later.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: George Shen <George.Shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
Allow changing DET size with debug flag for testing purposes
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Vendor specific link rate toggle workaround should not be
applied outside of link training scenario, such as when
outputting PHY test pattern.
[How]
Add flag to indicate when link training is occuring.
Make workaround a no-op when flag is not set.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: George Shen <George.Shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Certain LTTPR require special workarounds in order to comply
with DP specifications.
[How]
Implement vendor specific sequences via DPCD writes to
vendor-specific LTTPR registers.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: George Shen <George.Shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
Adding a debugfs to show PSR capability of the panel and the driver.
To use:
cat /sys/kernel/debug/dri/0/eDP-X/psr_capability
Expected output:
Sink support: no/yes
Driver support: no/yes
[how]
Adding psr_capability to eDP connectors.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
Driver use primary eDP link stream as the condition
to enable fastboot or not.
In dual eDP case, set second screen only,
this would cause slave eDP timing to be used on primary one.
[HOW]
Add a check for unmatched eDP link stream.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Brandon Syu <Brandon.Syu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
Russell King (Oracle)
Zhou Qingyang
Tianchen Ding
Christophe JAILLET
kernel test robot
Dan Carpenter
Giulio Benetti
John Keeping
Matthias Schiffer
Dave Airlie
jason-jh.lin
Philip Yang
shaoyunl
Perry Yuan
Jimmy Kizito
Mustapha Ghaddar
Shen, George
Nicholas Kazlauskas
Lijo Lazar
Guchun Chen
Flora Cui
Jane Jian
Mitch Williams
Wolfram Sang
Yann Dirson
Graham Sider
Alain Volmat
Aric Cyr
Anthony Koo
Michael Strauss
Mikita Lipski
Brandon Syu