| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
There is no change in behaviour, only some code is moved from
pwm_apply_state to a separate function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Provide improved mailbox communication, between PF and VF,
which is defined as API version 1.5.
Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Improve reliability of the mailbox communication and remove
its potential flaws that may lead to the undefined or faulty behavior.
Recently some users reported issues on ESX with 10G Intel NICs which were
found to be caused by incorrect implementation of the PF-VF mailbox
communication.
Technical investigation highlighted areas to improve in the communication
between PF or VF that wants to send the message (sender) and the other
part which receives the message (receiver):
- Locking the mailbox when the sender wants to send a message
- Releasing the mailbox when the communication ends
- Returning the result of the mailbox message execution
Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add legacy suffix to mailbox functions which should be backwards compatible
with older PF drivers. Communication during API negotiation always has to
be done using the earlier implementation.
Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add new handling for error codes:
IXGBE_ERR_CONFIG - ixgbe_mbx_operations is not correctly set
IXGBE_ERR_TIMEOUT - mailbox operation, e.g. poll for message, timeout
Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
There is name similarity within IXGBE_VT_MSGTYPE_ACK and
PFMAILBOX.ACK / VFMAILBOX.ACK. MSGTYPE macros are renamed to SUCCESS and
FAILURE because they are not specified in datasheet and now will be
easily distinguishable.
Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Revert commit c10383e8ddf4 ("ACPI: scan: Release PM resources blocked
by unused objects"), because it causes boot issues to appear on some
platforms.
Reported-by: Kyle D. Pelton <kyle.d.pelton@intel.com>
Reported-by: Saranya Gopal <saranya.gopal@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Properly reconfigure VF VSIs after VF request ADQ.
Created new function to update queue mapping and queue pairs per TC
with AQ update VSI. This sets proper RSS size on NIC.
VFs num_queue_pairs should not be changed during setup of queue maps.
Previously, VF main VSI in ADQ had configured too many queues and had
wrong RSS size, which lead to packets not being consumed and drops in
connectivity.
Fixes: bc6d33c8d93f ("i40e: Fix the number of queues available to be mapped for use")
Co-developed-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Eryk Rybak <eryk.roch.rybak@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Currently, the i40e_vsi_setup_queue_map is basing the count of queues in
TCs on a VSI's alloc_queue_pairs member which is not changed throughout
any user's action (for example via ethtool's set_channels callback).
This implies that vsi->tc_config.tc_info[n].qcount value that is given
to the kernel via netdev_set_tc_queue() that notifies about the count of
queues per particular traffic class is constant even if user has changed
the total count of queues.
This in turn caused the kernel warning after setting the queue count to
the lower value than the initial one:
$ ethtool -l ens801f0
Channel parameters for ens801f0:
Pre-set maximums:
RX: 0
TX: 0
Other: 1
Combined: 64
Current hardware settings:
RX: 0
TX: 0
Other: 1
Combined: 64
$ ethtool -L ens801f0 combined 40
[dmesg]
Number of in use tx queues changed invalidating tc mappings. Priority
traffic classification disabled!
Reason was that vsi->alloc_queue_pairs stayed at 64 value which was used
to set the qcount on TC0 (by default only TC0 exists so all of the
existing queues are assigned to TC0). we update the offset/qcount via
netdev_set_tc_queue() back to the old value but then the
netif_set_real_num_tx_queues() is using the vsi->num_queue_pairs as a
value which got set to 40.
Fix it by using vsi->req_queue_pairs as a queue count that will be
distributed across TCs. Do it only for non-zero values, which implies
that user actually requested the new count of queues.
For VSIs other than main, stay with the vsi->alloc_queue_pairs as we
only allow manipulating the queue count on main VSI.
Fixes: bc6d33c8d93f ("i40e: Fix the number of queues available to be mapped for use")
Co-developed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Co-developed-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Eryk Rybak <eryk.roch.rybak@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Remove the reason of null pointer dereference in sync VSI filters.
Added new I40E_VSI_RELEASING flag to signalize deleting and releasing
of VSI resources to sync this thread with sync filters subtask.
Without this patch it is possible to start update the VSI filter list
after VSI is removed, that's causing a kernel oops.
Fixes: 41c445ff0f48 ("i40e: main driver core")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Michal Maloszewski <michal.maloszewski@intel.com>
Reviewed-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Reviewed-by: Witold Fijalkowski <witoldx.fijalkowski@intel.com>
Reviewed-by: Jaroslaw Gawin <jaroslawx.gawin@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Setting VLAN port increasing RX queue max_pkt_size
by 4 bytes to take VLAN tag into account.
Trigger the VF reset when setting port VLAN for
VF to renegotiate its capabilities and reinitialize.
Fixes: ba4e003d29c1 ("i40e: don't hold spinlock while resetting VF")
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Eryk Rybak <eryk.roch.rybak@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The intel_engine_create_virtual() function does not return NULL. It
returns error pointers.
Fixes: e5e32171a2cf ("drm/i915/guc: Connect UAPI to GuC multi-lrc interface")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211116114916.GB11936@kili
|
|
Export the zynqmp_pm_feature(), so it can be use by other as to get API
version available in firmware.
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Abhyuday Godhasara <abhyuday.godhasara@xilinx.com>
Link: https://lore.kernel.org/r/20211026042525.26612-4-abhyuday.godhasara@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add macros for the Node-Id of Error events.
Move supported api callback ids from zynqmp-power to zynqmp-firmware.
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Abhyuday Godhasara <abhyuday.godhasara@xilinx.com>
Link: https://lore.kernel.org/r/20211026042525.26612-3-abhyuday.godhasara@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In zynqmp-firmware, register notifier is not supported, add support of
register notifier in zynqmp-firmware.
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Abhyuday Godhasara <abhyuday.godhasara@xilinx.com>
Link: https://lore.kernel.org/r/20211026042525.26612-2-abhyuday.godhasara@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add KUnit tests for the contiguous physical memory regions merging
functionality from the Nitro Enclaves misc device logic.
We can build the test binary with the following configuration:
CONFIG_KUNIT=y
CONFIG_NITRO_ENCLAVES=m
CONFIG_NITRO_ENCLAVES_MISC_DEV_TEST=y
and install the nitro_enclaves module to run the testcases.
We'll see the following message using dmesg if everything goes well:
[...] # Subtest: ne_misc_dev_test
[...] 1..1
[...] (NULL device *): Physical mem region address is not 2 MiB aligned
[...] (NULL device *): Physical mem region size is not multiple of 2 MiB
[...] (NULL device *): Physical mem region address is not 2 MiB aligned
[...] ok 1 - ne_misc_dev_test_merge_phys_contig_memory_regions
[...] ok 1 - ne_misc_dev_test
Reviewed-by: Andra Paraschiv <andraprs@amazon.com>
Signed-off-by: Longpeng <longpeng2@huawei.com>
Link: https://lore.kernel.org/r/20211107140918.2106-5-longpeng2@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add the initial setup for the KUnit tests that will target the Nitro
Enclaves misc device functionality.
Reviewed-by: Andra Paraschiv <andraprs@amazon.com>
Signed-off-by: Longpeng <longpeng2@huawei.com>
Link: https://lore.kernel.org/r/20211107140918.2106-4-longpeng2@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Sanity check the physical memory regions during the merge of contiguous
regions. Thus we can test the physical memory regions setup logic
individually, including the error cases coming from the sanity checks.
Reviewed-by: Andra Paraschiv <andraprs@amazon.com>
Signed-off-by: Longpeng <longpeng2@huawei.com>
Link: https://lore.kernel.org/r/20211107140918.2106-3-longpeng2@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There can be cases when there are more memory regions that need to be
set for an enclave than the maximum supported number of memory regions
per enclave. One example can be when the memory regions are backed by 2
MiB hugepages (the minimum supported hugepage size).
Let's merge the adjacent regions if they are physically contiguous. This
way the final number of memory regions is less than before merging and
could potentially avoid reaching maximum.
Reviewed-by: Andra Paraschiv <andraprs@amazon.com>
Signed-off-by: Longpeng <longpeng2@huawei.com>
Link: https://lore.kernel.org/r/20211107140918.2106-2-longpeng2@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
'destroy_workqueue()' already drains the queue before destroying it, so
there is no need to flush it explicitly.
Remove the redundant 'flush_workqueue()' calls.
This was generated with coccinelle:
@@
expression E;
@@
- flush_workqueue(E);
destroy_workqueue(E);
Reviewed-by: Andra Paraschiv <andraprs@amazon.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/d57f5c7e362837a8dfcde0d726a76b56f114e619.1636736947.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This is a partial revert of commit
29bc22ac5e5b ("binder: use euid from cred instead of using task").
Setting sender_euid using proc->cred caused some Android system test
regressions that need further investigation. It is a partial
reversion because subsequent patches rely on proc->cred.
Fixes: 29bc22ac5e5b ("binder: use euid from cred instead of using task")
Cc: stable@vger.kernel.org # 4.4+
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Todd Kjos <tkjos@google.com>
Change-Id: I9b1769a3510fed250bb21859ef8beebabe034c66
Link: https://lore.kernel.org/r/20211112180720.2858135-1-tkjos@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In following patches, dev_watchdog() will no longer stop all queues.
It will read queue->trans_start locklessly.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
- Add support for AOSP Bluetooth Quality Report
- Enables AOSP extension for Mediatek Chip (MT7921 & MT7922)
- Rework of HCI command execution serialization
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Change the values of EVENT_* constants from bit masks to bit numbers as
accepted by {clear,set,test}_bit() functions.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Access to netdev after free_netdev() will cause use-after-free bug.
Move debug log before free_netdev() call to avoid it.
Fixes: 7472dd9f6499 ("staging: fsl-dpaa2/eth: Move print message")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Like ThinkaPad Thunderbolt 4 Dock, more Lenovo docks start to use the original
Realtek USB ethernet chip ID 0bda:8153.
Lenovo Docks always use their own IDs for usb hub, even for older Docks.
If parent hub is from Lenovo, then r8152 should try MAC passthrough.
Verified on Lenovo TBT3 dock too.
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If the used PHYs also support hardware timestamping, all configuration requests
should be forwared to the PHYs instead of being processed by the MAC driver
itself.
This enables PHY timestamping in combination with the cpsw driver.
Tested with an am335x based board with two DP83640 PHYs connected to the cpsw
switch.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If the first call to devm_usb_get_phy_by_phandle(dev, "fsl,usbphy", 0)
fails with something other than -ENODEV then it leads to an error
pointer dereference. For those errors we should just jump directly to
the error handling.
Fixes: 8253a34bfae3 ("usb: chipidea: ci_hdrc_imx: Also search for 'phys' phandle")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211117074923.GF5237@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
xHC hardware can only have one slot in default state with address 0
waiting for a unique address at a time, otherwise "undefined behavior
may occur" according to xhci spec 5.4.3.4
The address0_mutex exists to prevent this across both xhci roothubs.
If hub_port_init() fails, it may unlock the mutex and exit with a xhci
slot in default state. If the other xhci roothub calls hub_port_init()
at this point we end up with two slots in default state.
Make sure the address0_mutex protects the slot default state across
hub_port_init() retries, until slot is addressed or disabled.
Note, one known minor case is not fixed by this patch.
If device needs to be reset during resume, but fails all hub_port_init()
retries in usb_reset_and_verify_device(), then it's possible the slot is
still left in default state when address0_mutex is unlocked.
Cc: <stable@vger.kernel.org>
Fixes: 638139eb95d2 ("usb: hub: allow to process more usb hub events in parallel")
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20211115221630.871204-1-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The code that enables either BC_LVL or COMP_CHNG interrupt in tcpm_set_cc
wrongly assumes that the interrupt is unmasked by writing 1 to the apropriate
bit in the mask register. In fact, interrupts are enabled when the mask
is 0, so the tcpm_set_cc enables interrupt for COMP_CHNG when it expects
BC_LVL interrupt to be enabled.
This causes inability of the driver to recognize cable unplug events
in host mode (unplug is recognized only via a COMP_CHNG interrupt).
In device mode this bug was masked by simultaneous triggering of the VBUS
change interrupt, because of loss of VBUS when the port peer is providing
power.
Fixes: 48242e30532b ("usb: typec: fusb302: Revert "Resolve fixed power role contract setup"")
Cc: stable <stable@vger.kernel.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Ondrej Jirman <megous@megous.com>
Link: https://lore.kernel.org/r/20211108102833.2793803-1-megous@megous.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
in case of a PCI dwc3 controller, leave the default DMA
mask. Calling of a 64 bit DMA mask breaks the driver on
cherrytrail based tablets like Cyberbook T116.
Fixes: 45d39448b4d0 ("usb: dwc3: support 64 bit DMA in platform driver")
Cc: stable <stable@vger.kernel.org>
Reported-by: Hans De Goede <hdegoede@redhat.com>
Tested-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Link: https://lore.kernel.org/r/20211113142959.27191-1-fabioaiuto83@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A new commit in LLVM causes an error on the use of 'long double' when
'-mno-x87' is used, which the kernel does through an alias,
'-mno-80387' (see the LLVM commit below for more details around why it
does this).
drivers/usb/dwc2/hcd_queue.c:1744:25: error: expression requires 'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
delay = ktime_set(0, DWC2_RETRY_WAIT_DELAY);
^
drivers/usb/dwc2/hcd_queue.c:62:34: note: expanded from macro 'DWC2_RETRY_WAIT_DELAY'
#define DWC2_RETRY_WAIT_DELAY (1 * 1E6L)
^
1 error generated.
This happens due to the use of a 'long double' literal. The 'E6' part of
'1E6L' causes the literal to be a 'double' then the 'L' suffix promotes
it to 'long double'.
There is no visible reason for a floating point value in this driver, as
the value is only used as a parameter to a function that expects an
integer type. Use NSEC_PER_MSEC, which is the same integer value as
'1E6L', to avoid changing functionality but fix the error.
Link: https://github.com/ClangBuiltLinux/linux/issues/1497
Link: https://github.com/llvm/llvm-project/commit/a8083d42b1c346e21623a1d36d1f0cadd7801d83
Fixes: 6ed30a7d8ec2 ("usb: dwc2: host: use hrtimer for NAK retries")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: John Keeping <john@metanate.com>
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20211105145802.2520658-1-nathan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In the endpoint interrupt functions
dwc3_gadget_endpoint_transfer_in_progress() and
dwc3_gadget_endpoint_trbs_complete() will dereference the endpoint
descriptor. But it could be cleared in __dwc3_gadget_ep_disable()
when accessory disconnected. So we need to check whether it is null
or not before dereferencing it.
Fixes: f09ddcfcb8c5 ("usb: dwc3: gadget: Prevent EP queuing while stopping transfers")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Jack Pham <quic_jackp@quicinc.com>
Signed-off-by: Albert Wang <albertccwang@google.com>
Link: https://lore.kernel.org/r/20211109092642.3507692-1-albertccwang@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A successful 'clk_prepare_enable()' call should be balanced by a
corresponding 'clk_disable_unprepare()' call in the error handling path
of the probe, as already done in the remove function.
Fixes: 24749229211c ("usb: gadget: udc-xilinx: Add clock support")
Reviewed-by: Shubhrajyoti Datta <shubhraj@xilinx.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/ec61a89b83ce34b53a3bdaacfd1413a9869cc608.1636302246.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Older device-trees don't specify padctrl interrupt and xhci-tegra driver
now fails to probe with -EINVAL using those device-trees. Check interrupt
presence and keep runtime PM disabled if it's missing to fix the trouble.
Fixes: 971ee247060d ("usb: xhci: tegra: Enable ELPG for runtime/system PM")
Cc: <stable@vger.kernel.org> # 5.14+
Reported-by: Nicolas Chauvet <kwizart@gmail.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com> # T124 TK1
Tested-by: Thomas Graichen <thomas.graichen@gmail.com> # T124 Nyan Big
Tested-by: Thierry Reding <treding@nvidia.com> # Tegra CI
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20211107224455.10359-1-digetx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Added updating of request frame number for elapsed frames,
otherwise frame number will remain as previous use of request.
This will allow function driver to correctly track frames in
case of Missed ISOC occurs.
Added setting request actual length to 0 for elapsed frames.
In Slave mode when pushing data to RxFIFO by dwords, request
actual length incrementing accordingly. But before whole packet
will be pushed into RxFIFO and send to host can occurs Missed
ISOC and data will not send to host. So, in this case request
actual length should be reset to 0.
Fixes: 91bb163e1e4f ("usb: dwc2: gadget: Fix ISOC flow for BDMA and Slave")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/c356baade6e9716d312d43df08d53ae557cb8037.1636011277.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The programming guide noted that the driver needs to verify if the link
state is in U0 before executing the Start Transfer command. If it's not
in U0, the driver needs to perform remote wakeup. This is not accurate.
If the link state is in U1/U2, then the controller will not respond to
link recovery request from DCTL.ULSTCHNGREQ. The Start Transfer command
will trigger a link recovery if it is in U1/U2. A clarification will be
added to the programming guide for all controller versions.
The current implementation shouldn't cause any functional issue. It may
occasionally report an invalid time out warning from failed link
recovery request. The driver will still go ahead with the Start Transfer
command if the remote wakeup fails. The new change only initiates remote
wakeup where it is needed, which is when the link state is in L1/L2/U3.
Fixes: c36d8e947a56 ("usb: dwc3: gadget: put link to U0 before Start Transfer")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/05b4a5fbfbd0863fc9b1d7af934a366219e3d0b4.1635204761.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The End Transfer command from a stream endpoint will generate a NoStream
event, and we should ignore it. Currently we set the flag
DWC3_EP_IGNORE_NEXT_NOSTREAM to track this prior to sending the command,
and it will be cleared on the next stream event. However, a stream event
may be generated before the End Transfer command completion and
prematurely clear the flag. Fix this by setting the flag on End Transfer
completion instead.
Fixes: 140ca4cfea8a ("usb: dwc3: gadget: Handle stream transfers")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/cee1253af4c3600edb878d11c9c08b040817ae23.1635203975.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
During our predesign phase for DWC_usb32, the GHWPARAMS9 register offset
was 0xc680. We revised our final design, and the GHWPARAMS9 offset is
now moved to 0xc6e8 on release.
Fixes: 16710380d3aa ("usb: dwc3: Capture new capability register GHWPARAMS9")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/1541737108266a97208ff827805be1f32852590c.1635202893.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Type-c class provides an option to expose the number of alternate
modes in the port partner as a sysfs interface. Use that to
expose the number of alternate modes in the port partner from
the ucsi driver.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Rajaram Regupathy <rajaram.regupathy@intel.com>
Signed-off-by: Saranya Gopal <saranya.gopal@intel.com>
Link: https://lore.kernel.org/r/20211116103613.31349-1-saranya.gopal@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Some platforms, e.g. 8183/8192, use low level latch way to keep
wakeup signal, it may latch a wrong signal if debounce more time,
and enable wakeup function earlier.
____________________
ip_sleep ____/ \_____________
___________________
wakeup_signal ____________/ \______
_______________________________
wakeup_en _______/
^ ^
|(1) |(2)
latch wakeup_signal mistakenly at (1), should latch it at (2);
Workaround: delay about 100us to enable wakeup, meanwhile decrease
debounce time.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20211102025004.29156-2-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
No need check the return value, just return it.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20211102025004.29156-1-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The intel_engine_create_virtual() function does not return NULL. It
returns error pointers.
Fixes: e5e32171a2cf ("drm/i915/guc: Connect UAPI to GuC multi-lrc interface")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211116114916.GB11936@kili
(cherry picked from commit fc12b70d12d07598cde27cc17dbfafc2a2a33ff8)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
v2: Fix the typo, move out the hardcoding from
macro(Jani, Ville)
Fixes: f87c46c43175 ("drm/i915/dsi/xelpd: Add WA to program LP to HS wakeup guardband")
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211019151435.20477-2-vandita.kulkarni@intel.com
(cherry picked from commit 6f07707fa09e1dc58c431d57c25ef2e68b9bec47)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
This reverts commit 991d9557b0c4 ("drm/i915/tgl/dsi: Gate the ddi clocks
after pll mapping"). The Bspec was updated recently with the pll ungate
sequence similar to that of icl dsi enable sequence. Hence reverting.
Bspec: 49187
Fixes: 991d9557b0c4 ("drm/i915/tgl/dsi: Gate the ddi clocks after pll mapping")
Cc: <stable@vger.kernel.org> # v5.4+
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211109120428.15211-1-vandita.kulkarni@intel.com
(cherry picked from commit 4579509ef181480f4e4510d436c691519167c5c2)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
As we're using Intel Aero firmware, make the code closer to the
driver for such device.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Replace the legacy GPIO APIs with gpio descriptor consumer
interface. Remove all gpio inversion(active low) flags as it is
already handled by the gpiod_set_value() and gpiod_get_value()
functions.
Reviewed-by: Dan Sneddon <dan.sneddon@microchip.com>
Signed-off-by: Balamanikandan Gunasundar <balamanikandan.gunasundar@microchip.com>
Link: https://lore.kernel.org/r/20211026085610.25264-1-balamanikandan.gunasundar@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In the config_ep_by_speed_and_alt function, select the corresponding
descriptor through g->speed. But some legacy or not well designed
function drivers may not support the corresponding speed. So, we can
directly display warnings instead of causing kernel panic. At the
same time, it indicates the reasons in warning message.
Reviewed-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Qihang Hu <huqihang@oppo.com>
Link: https://lore.kernel.org/r/20211110101129.462357-1-huqihang@oppo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Unlike the other integral options supported by the MIDI gadget, index is
a signed integer and defaults to -1, which means "choose any sound card
index". The generic store routine parses input into a u32 which fails
to properly read -1 if an attempt is made to set the value to the
default.
Add a new macro block for signed values to fix this, and use the correct
format string for unsigned values.
Signed-off-by: John Keeping <john@metanate.com>
Link: https://lore.kernel.org/r/20211029134115.351008-1-john@metanate.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
'destroy_workqueue()' already drains the queue before destroying it, so
there is no need to flush it explicitly.
Remove the redundant 'flush_workqueue()' calls.
This was generated with coccinelle:
@@
expression E;
@@
- flush_workqueue(E);
destroy_workqueue(E);
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Peter Chen <peter.chen@kernel.or> # for chipidea part
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/563123a8117d6cafae3f134e497587bd2b8bb7f4.1636734453.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
Uwe Kleine-König
Radoslaw Tyl
Rafael J. Wysocki
Eryk Rybak
Michal Maloszewski
Dan Carpenter
Abhyuday Godhasara
Longpeng
Christophe JAILLET
Todd Kjos
Eric Dumazet
David S. Miller
Łukasz Stelmach
Pavel Skripkin
Aaron Ma
Kurt Kanzenbach
Mathias Nyman
Ondrej Jirman
Fabio Aiuto
Nathan Chancellor
Albert Wang
Dmitry Osipenko
Minas Harutyunyan
Thinh Nguyen
Saranya Gopal
Chunfeng Yun
Vandita Kulkarni
Mauro Carvalho Chehab
Balamanikandan Gunasundar
Qihang Hu
John Keeping