aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2021-11-04drm/i915: Split vlv/chv sprite plane update into noarm+arm pairVille Syrjälä1-15/+30
Chop vlv_sprite_update() into two halves. Fist half becomes the _noarm() variant, second part the _arm() variant. Fortunately I have already previously grouped the register writes into roughtly the correct order, so the split looks surprisingly clean. Looks like most of the hardware logic was copied from the pre-ctg sprite C, so SPSTRIDE/POS/SIZE are armed by SPSURF, while the rest are self arming. SPCONSTALPHA is the one entirely new register that didn't exist in the old sprite C, and looks like that one is self arming. The CHV pipe B CSC is also self arming, like the rest of the CHV pipe B additions. I didn't have time to capture i915_update_info numbers for these, but since all the other platforms generally showed improvements, and crucially no regression, I am fairly confident this should behave similarly. Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211018115030.3547-10-ville.syrjala@linux.intel.com Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
2021-11-04drm/i915: Split ivb+ sprite plane update into noarm+arm pairVille Syrjälä1-14/+28
Chop ivb_sprite_update() into two halves. Fist half becomes the _noarm() variant, second part the _arm() variant. Fortunately I have already previously grouped the register writes into roughtly the correct order, so the split looks surprisingly clean. Didn't bother with i915_update_info numbers for this one. I expect the results to be pretty much identical to the snb numbers from the corresponding g4x+ sprite modification. Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211018115030.3547-9-ville.syrjala@linux.intel.com Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
2021-11-04drm/i915: Split g4x+ sprite plane update into noarm+arm pairVille Syrjälä1-13/+28
Chop g4x_sprite_update() into two halves. Fist half becomes the _noarm() variant, second part the _arm() variant. Fortunately I have already previously grouped the register writes into roughtly the correct order, so the split looks surprisingly clean. Not much of a change in i915_update_info on these older platforms that don't have so many planes or registers to begin with. Here are the numbers from snb (totally unpatched vs. both primary plane and sprite patched applied) running kms_atomic_transition --r plane-all-transition --extended: w/o patch w/ patch Updates: 5404 Updates: 5405 | | 1us |****** 1us |****** |********* |********* 4us |*********** 4us |*********** |********** |********** 16us |** 16us |** | | 66us | 66us | | | 262us | 262us | | | 1ms | 1ms | | | 4ms | 4ms | | | 17ms | 17ms | | | Min update: 1400ns Min update: 1307ns Max update: 19809ns Max update: 20194ns Average update: 6957ns Average update: 6432ns Overruns > 100us: 0 Overruns > 100us: 0 But there seems to be a slight improvement with lockdep enabled: w/o patch w/ patch Updates: 17612 Updates: 16364 | | 1us | 1us | |****** |****** 4us |********** 4us |********** |************ |************* 16us |************* 16us |************ |*** |* 66us | 66us | | | 262us | 262us | | | 1ms | 1ms | | | 4ms | 4ms | | | 17ms | 17ms | | | Min update: 3141ns Min update: 3562ns Max update: 126450ns Max update: 73354ns Average update: 16373ns Average update: 15153ns Overruns > 250us: 0 Overruns > 250us: 0 Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211018115030.3547-8-ville.syrjala@linux.intel.com Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
2021-11-04drm/i915: Split pre-skl primary plane update into noarm+arm pairVille Syrjälä1-22/+59
Chop i9xx_plane_update() into two halves. Fist half becomes the _noarm() variant, second part the _arm() variant. Fortunately I have already previously grouped the register writes into roughtly the correct order, so the split looks surprisingly clean. One slightly surprising fact was that the CHV pipe B PRIMPOS/SIZE registers are self arming unlike their pre-ctg DSPPOS/SIZE counterparts. In fact all the new CHV pipe B registers are self arming. Also we must remind ourselves that i830/i845 are a bit borked in that all of their plane registers are self-arming. I didn't do any i915_update_info measurements for this one alone. I'll get total numbers with the corrsponding sprite plane changes. v2: Don't break my precious i830/i845 Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211020212757.13517-1-ville.syrjala@linux.intel.com Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
2021-11-04drm/i915: Split skl+ plane update into noarm+arm pairVille Syrjälä1-41/+72
Chop skl_program_plane() into two halves. Fist half becomes the _noarm() variant, second part the _arm() variant. Fortunately I have already previously grouped the register writes into roughtly the correct order, so the split looks surprisingly clean. A few notable oddities I did not realize were self arming are AUX_DIST and COLOR_CTL. i915_update_info doesn't look too terrible on my cfl running kms_atomic_transition --r plane-all-transition --extended: w/o patch w/ patch Updates: 2178 Updates: 2018 | | 1us | 1us | | | 4us | 4us |***** |********* |********** 16us |********** 16us |******* |*** | 66us | 66us | | | 262us | 262us | | | 1ms | 1ms | | | 4ms | 4ms | | | 17ms | 17ms | | | Min update: 8332ns Min update: 6164ns Max update: 48758ns Max update: 31808ns Average update: 19959ns Average update: 13159ns Overruns > 100us: 0 Overruns > 100us: 0 And with lockdep enabled: w/o patch w/ patch Updates: 2177 Updates: 2172 | | 1us | 1us | | | 4us | 4us | |******* |********* 16us |********** 16us |********** |******* |* 66us | 66us | | | 262us | 262us | | | 1ms | 1ms | | | 4ms | 4ms | | | 17ms | 17ms | | | Min update: 12645ns Min update: 9980ns Max update: 50153ns Max update: 33533ns Average update: 25337ns Average update: 18245ns Overruns > 250us: 0 Overruns > 250us: 0 TODO: On icl+ everything seems to be armed by PLANE_SURF, so we can optimize this even further on modern platforms. But I think there's a bit of refactoring to be done first to figure out the best way to go about it (eg. just reusing the current skl+ functions, or doing a lower level split). TODO: Split scaler programming as well, but IIRC the scaler has some oddball double buffering behaviour on some platforms, so needs proper reverse engineering Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211018115030.3547-6-ville.syrjala@linux.intel.com Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
2021-11-04drm/i915: Split update_plane() into update_noarm() + update_arm()Ville Syrjälä9-94/+192
The amount of plane registers we have to write has been steadily increasing, putting more pressure on the vblank evasion mechanism and forcing us to increase its time budget. Let's try to take some of the pressure off by splitting plane updates into two parts: 1) write all non-self arming plane registers, ie. the registers where the write actually does nothing until a separate arming register is also written which will cause the hardware to latch the new register values at the next start of vblank 2) write all self arming plane registers, ie. registers which always just latch at the next start of vblank, and registers which also arm other registers to do so Here we just provide the mechanism, but don't actually implement the split on any platform yet. so everything stays now in the _arm() hooks. Subsequently we can move a whole bunch of stuff into the _noarm() part, especially in more modern platforms where the number of registers we have to write is also the greatest. On older platforms this is less beneficial probably, but no real reason to deviate from a common behaviour. And let's sprinkle some TODOs around the areas that will need adapting. Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211018115030.3547-5-ville.syrjala@linux.intel.com Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
2021-11-04drm/i915: Fix up the sprite namespacingVille Syrjälä1-53/+53
Give all sprite exclusive functions/etc. a proper namespace. Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211018115030.3547-4-ville.syrjala@linux.intel.com Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
2021-11-04drm/i915: Fix async flip with decryption and/or DPTVille Syrjälä1-10/+20
We're currently forgetting to set the PLANE_SURF_DECRYPT flag in the async flip path. So if the hardware were to latch that bit despite this being an async flip we'd start scanning out garbage. And if it doesn't latch it then I guess we'd just end up with a weird register value that doesn't actually match the hardware state, which isn't great for anyone staring at register dumps. Similarly the async flip path also forgets to call skl_surf_address() which means the DPT address space to GGTT address space downshift is not being applied to the offset. Which means we are pointing PLANE_SURF at some random location in GGTT instead of the correct DPT page. So let's fix two birds with one stone and extract the PLANE_SURF calculation from skl_program_plane() into a small helper and use it in the async flip path as well. Cc: Anshuman Gupta <anshuman.gupta@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Juston Li <juston.li@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Karthik B S <karthik.b.s@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211018115030.3547-3-ville.syrjala@linux.intel.com Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
2021-11-04gpio: virtio: Add IRQ supportViresh Kumar2-4/+299
This patch adds IRQ support for the virtio GPIO driver. Note that this uses the irq_bus_lock/unlock() callbacks, since those operations over virtio may sleep. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2021-11-04Merge tag 'driver-core-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds12-101/+161
Pull driver core updates from Greg KH: "Here is the big set of driver core changes for 5.16-rc1. All of these have been in linux-next for a while now with no reported problems. Included in here are: - big update and cleanup of the sysfs abi documentation files and scripts from Mauro. We are almost at the place where we can properly check that the running kernel's sysfs abi is documented fully. - firmware loader updates - dyndbg updates - kernfs cleanups and fixes from Christoph - device property updates - component fix - other minor driver core cleanups and fixes" * tag 'driver-core-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (122 commits) device property: Drop redundant NULL checks x86/build: Tuck away built-in firmware under FW_LOADER vmlinux.lds.h: wrap built-in firmware support under FW_LOADER firmware_loader: move struct builtin_fw to the only place used x86/microcode: Use the firmware_loader built-in API firmware_loader: remove old DECLARE_BUILTIN_FIRMWARE() firmware_loader: formalize built-in firmware API component: do not leave master devres group open after bind dyndbg: refine verbosity 1-4 summary-detail gpiolib: acpi: Replace custom code with device_match_acpi_handle() i2c: acpi: Replace custom function with device_match_acpi_handle() driver core: Provide device_match_acpi_handle() helper dyndbg: fix spurious vNpr_info change dyndbg: no vpr-info on empty queries dyndbg: vpr-info on remove-module complete, not starting device property: Add missed header in fwnode.h Documentation: dyndbg: Improve cli param examples dyndbg: Remove support for ddebug_query param dyndbg: make dyndbg a known cli param dyndbg: show module in vpr-info in dd-exec-queries ...
2021-11-04Merge tag 'char-misc-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds319-6200/+19450
Pull char/misc driver updates from Greg KH: "Here is the big set of char and misc and other tiny driver subsystem updates for 5.16-rc1. Loads of things in here, all of which have been in linux-next for a while with no reported problems (except for one called out below.) Included are: - habanana labs driver updates, including dma_buf usage, reviewed and acked by the dma_buf maintainers - iio driver update (going through this tree not staging as they really do not belong going through that tree anymore) - counter driver updates - hwmon driver updates that the counter drivers needed, acked by the hwmon maintainer - xillybus driver updates - binder driver updates - extcon driver updates - dma_buf module namespaces added (will cause a build error in arm64 for allmodconfig, but that change is on its way through the drm tree) - lkdtm driver updates - pvpanic driver updates - phy driver updates - virt acrn and nitr_enclaves driver updates - smaller char and misc driver updates" * tag 'char-misc-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (386 commits) comedi: dt9812: fix DMA buffers on stack comedi: ni_usb6501: fix NULL-deref in command paths arm64: errata: Enable TRBE workaround for write to out-of-range address arm64: errata: Enable workaround for TRBE overwrite in FILL mode coresight: trbe: Work around write to out of range coresight: trbe: Make sure we have enough space coresight: trbe: Add a helper to determine the minimum buffer size coresight: trbe: Workaround TRBE errata overwrite in FILL mode coresight: trbe: Add infrastructure for Errata handling coresight: trbe: Allow driver to choose a different alignment coresight: trbe: Decouple buffer base from the hardware base coresight: trbe: Add a helper to pad a given buffer area coresight: trbe: Add a helper to calculate the trace generated coresight: trbe: Defer the probe on offline CPUs coresight: trbe: Fix incorrect access of the sink specific data coresight: etm4x: Add ETM PID for Kryo-5XX coresight: trbe: Prohibit trace before disabling TRBE coresight: trbe: End the AUX handle on truncation coresight: trbe: Do not truncate buffer on IRQ coresight: trbe: Fix handling of spurious interrupts ...
2021-11-04drm/i915: Reject planar formats when doing async flipsVille Syrjälä1-0/+6
Async flips are only capable of changing PLANE_SURF, hence we they can't easily be used with planar formats. Older platforms could require updating AUX_DIST as well, which is not possible. We'd have to make sure AUX_DIST doesn't change before allowing the async flip through. If we could get async flips with CCS then that might be interesting, but since the hw doesn't allow async flips with CCS I don't see much point in allowing this for planar formats either. No one renders their game content in YUV anyway. icl+ could in theory do this I suppose since each color plane has its own PLANE_SURF register, but I don't know if there is some magic to guarantee that both the Y and UV plane would async flip synchronously if you will. Ie. beyond just a clean tear we'd potentially get some kind of weird tear with some random mix of luma and chroma from the old and new frames. So let's just say no to async flips when scanning out planar formats. Cc: Karthik B S <karthik.b.s@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211018115030.3547-2-ville.syrjala@linux.intel.com Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
2021-11-04Merge tag 'staging-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds255-22193/+3145
Pull staging driver updates from Greg KH: "Here is the big set of staging driver updates and cleanups for 5.16-rc1. Overall we ended up removing a lot of code this time, a bit over 20,000 lines are now gone thanks to a lot of cleanup work by many developers. Nothing huge in here functionality wise, just loads of cleanups: - r8188eu driver major cleanups and removal of unused and dead code - wlan-ng minor cleanups - fbtft driver cleanups - most driver cleanups - rtl8* drivers cleanups - rts5208 driver cleanups - vt6655 driver cleanups - vc04_services drivers cleanups - wfx cleanups on the way to almost getting this merged out of staging (it's close!) - tiny mips changes needed for the mt7621 drivers, they have been acked by the respective subsystem maintainers to go through this tree. All of these have been in linux-next for a while with no reported issues" * tag 'staging-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (622 commits) staging: r8188eu: hal: remove goto statement and local variable staging: rtl8723bs: hal remove the assignment to itself staging: rtl8723bs: fix unmet dependency on CRYPTO for CRYPTO_LIB_ARC4 staging: vchiq_core: get rid of typedef staging: fieldbus: anybus: reframe comment to avoid warning staging: r8188eu: fix missing unlock in rtw_resume() staging: r8188eu: core: remove the goto from rtw_IOL_accquire_xmit_frame staging: r8188eu: core: remove goto statement staging: vt6655: Rename `dwAL7230InitTable` array staging: vt6655: Rename `dwAL2230PowerTable` array staging: vt6655: Rename `dwAL7230InitTableAMode` array staging: vt6655: Rename `dwAL7230ChannelTable2` array staging: vt6655: Rename `dwAL7230ChannelTable1` array staging: vt6655: Rename `dwAL7230ChannelTable0` array staging: vt6655: Rename `dwAL2230ChannelTable1` array staging: vt6655: Rename `dwAL2230ChannelTable0` array staging: r8712u: fix control-message timeout staging: rtl8192u: fix control-message timeouts staging: mt7621-dts: add missing SPDX license to files staging: vchiq_core: fix quoted strings split across lines ...
2021-11-04Merge tag 'usb-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds87-909/+1545
Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt driver updates for 5.16-rc1. Nothing major in here, just lots of little cleanups and additions for new hardware, all of which have been in linux-next for a while with no reported problems. Included in here are: - tiny Thunderbolt driver updates - USB typec driver updates - USB serial driver updates - USB gadget driver updates - dwc2 and dwc3 controller driver updates - tiny USB host driver updates - minor USB driver fixes and updates - USB dts updates for various platforms" * tag 'usb-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (123 commits) usb: gadget: Mark USB_FSL_QE broken on 64-bit usb: gadget: f_mass_storage: Disable eps during disconnect usb: gadget: udc: core: Revise comments for USB ep enable/disable USB: serial: keyspan: fix memleak on probe errors USB: serial: cp210x: use usb_control_msg_recv() and usb_control_msg_send() USB: serial: ch314: use usb_control_msg_recv() USB: iowarrior: fix control-message timeouts Documentation: USB: fix example bulk-message timeout usb: dwc2: stm32mp15: set otg_rev usb: dwc2: add otg_rev and otg_caps information for gadget driver dt-bindings: usb: dwc2: adopt otg properties defined in usb-drd.yaml dt-bindings: usb: dwc2: Add reference to usb-drd.yaml usb: gadget: uvc: implement dwPresentationTime and scrSourceClock usb: gadget: uvc: use on returned header len in video_encode_isoc_sg usb:gadget: f_uac1: fixed sync playback Docs: usb: remove :c:func: for usb_register and usb_deregister Docs: usb: update struct usb_driver usb: gadget: configfs: change config attributes file operation usb: gadget: configfs: add cfg_to_gadget_info() helper usb: dwc3: Align DWC3_EP_* flag macros ...
2021-11-04PCI: vmd: Drop redundant includes of <asm/device.h>, <asm/msi.h>Krzysztof Wilczyński1-2/+0
We already include <linux/device.h> and <linux/msi.h>, which include <asm/device.h> and <asm/msi.h>. Drop the redundant includes of <asm/device.h> and <asm/msi.h>. [bhelgaas: squash in fix from Wan Jiabing <wanjiabing@vivo.com>: https://lore.kernel.org/r/20211104063720.29375-1-wanjiabing@vivo.com] Link: https://lore.kernel.org/r/20211013003145.1107148-1-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jonathan Derrick <jonathan.derrick@linux.dev>
2021-11-04drm/nouveau: clean up all clients on device removalJeremy Cline1-0/+30
The postclose handler can run after the device has been removed (or the driver has been unbound) since userspace clients are free to hold the file open as long as they want. Because the device removal callback frees the entire nouveau_drm structure, any reference to it in the postclose handler will result in a use-after-free. To reproduce this, one must simply open the device file, unbind the driver (or physically remove the device), and then close the device file. This was found and can be reproduced easily with the IGT core_hotunplug tests. To avoid this, all clients are cleaned up in the device finalization rather than deferring it to the postclose handler, and the postclose handler is protected by a critical section which ensures the drm_dev_unplug() and the postclose handler won't race. This is not an ideal fix, since as I understand the proposed plan for the kernel<->userspace interface for hotplug support, destroying the client before the file is closed will cause problems. However, I believe to properly fix this issue, the lifetime of the nouveau_drm structure needs to be extended to match the drm_device, and this proved to be a rather invasive change. Thus, I've broken this out so the fix can be easily backported. This fixes with the two previous commits CVE-2020-27820 (Karol). Cc: stable@vger.kernel.org # 5.4+ Signed-off-by: Jeremy Cline <jcline@redhat.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Tested-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Karol Herbst <kherbst@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201125202648.5220-4-jcline@redhat.com Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/14
2021-11-04floppy: address add_disk() error handling on probeLuis Chamberlain1-4/+13
We need to cleanup resources on the probe() callback registered with __register_blkdev(), now that add_disk() error handling is supported. Address this. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Link: https://lore.kernel.org/r/20211103230437.1639990-14-mcgrof@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-04ataflop: address add_disk() error handling on probeLuis Chamberlain1-6/+12
We need to cleanup resources on the probe() callback registered with __register_blkdev(), now that add_disk() error handling is supported. Address this. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Link: https://lore.kernel.org/r/20211103230437.1639990-13-mcgrof@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-04ataflop: remove ataflop_probe_lock mutexTetsuo Handa1-20/+27
Commit bf9c0538e485b591 ("ataflop: use a separate gendisk for each media format") introduced ataflop_probe_lock mutex, but forgot to unlock the mutex when atari_floppy_init() (i.e. module loading) succeeded. This will result in double lock deadlock if ataflop_probe() is called. Also, unregister_blkdev() must not be called from atari_floppy_init() with ataflop_probe_lock held when atari_floppy_init() failed, for ataflop_probe() waits for ataflop_probe_lock with major_names_lock held (i.e. AB-BA deadlock). __register_blkdev() needs to be called last in order to avoid calling ataflop_probe() when atari_floppy_init() is about to fail, for memory for completing already-started ataflop_probe() safely will be released as soon as atari_floppy_init() released ataflop_probe_lock mutex. As with commit 8b52d8be86d72308 ("loop: reorder loop_exit"), unregister_blkdev() needs to be called first in order to avoid calling ataflop_alloc_disk() from ataflop_probe() after del_gendisk() from atari_floppy_exit(). By relocating __register_blkdev() / unregister_blkdev() as explained above, we can remove ataflop_probe_lock mutex, for probe function and __exit function are serialized by major_names_lock mutex. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Fixes: bf9c0538e485b591 ("ataflop: use a separate gendisk for each media format") Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Link: https://lore.kernel.org/r/20211103230437.1639990-11-mcgrof@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-04mtd/ubi/block: add error handling support for add_disk()Luis Chamberlain1-1/+7
We never checked for errors on add_disk() as this function returned void. Now that this is fixed, use the shiny new error handling. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Link: https://lore.kernel.org/r/20211103230437.1639990-10-mcgrof@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-04block/sunvdc: add error handling support for add_disk()Luis Chamberlain1-3/+11
We never checked for errors on add_disk() as this function returned void. Now that this is fixed, use the shiny new error handling. We re-use the same free tag call, so we also add a label for that as well. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Link: https://lore.kernel.org/r/20211103230437.1639990-9-mcgrof@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-04z2ram: add error handling support for add_disk()Luis Chamberlain1-2/+5
We never checked for errors on add_disk() as this function returned void. Now that this is fixed, use the shiny new error handling. Only the disk is cleaned up inside z2ram_register_disk() as the caller deals with the rest. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Link: https://lore.kernel.org/r/20211103230437.1639990-8-mcgrof@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-04nvdimm/pmem: use add_disk() error handlingLuis Chamberlain1-1/+7
Now that device_add_disk() supports returning an error, use that. We must unwind alloc_dax() on error. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Link: https://lore.kernel.org/r/20211103230437.1639990-7-mcgrof@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-04nvdimm/pmem: cleanup the disk if pmem_release_disk() is yet assignedLuis Chamberlain1-4/+9
Prior to devm being able to use pmem_release_disk() there are other failure which can occur for which we must account for and release the disk for. Address those few cases. Fixes: 3dd60fb9d95d ("nvdimm/pmem: stop using q_usage_count as external pgmap refcount") Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Link: https://lore.kernel.org/r/20211103230437.1639990-6-mcgrof@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-04nvdimm/blk: add error handling support for add_disk()Luis Chamberlain1-1/+3
We never checked for errors on add_disk() as this function returned void. Now that this is fixed, use the shiny new error handling. Since nvdimm/blk uses devm we just need to move the devm registration towards the end. And in hindsight, that seems to also provide a fix given del_gendisk() should not be called unless the disk was already added via add_disk(). The probably of that issue happening is low though, like OOM while calling devm_add_action(), so the fix is minor. We manually unwind in case of add_disk() failure prior to the devm registration. Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Link: https://lore.kernel.org/r/20211103230437.1639990-5-mcgrof@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-04nvdimm/blk: avoid calling del_gendisk() on early failuresLuis Chamberlain1-5/+12
If nd_integrity_init() fails we'd get del_gendisk() called, but that's not correct as we should only call that if we're done with device_add_disk(). Fix this by providing unwinding prior to the devm call being registered and moving the devm registration to the very end. This should fix calling del_gendisk() if nd_integrity_init() fails. I only spotted this issue through code inspection. It does not fix any real world bug. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Link: https://lore.kernel.org/r/20211103230437.1639990-4-mcgrof@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-04nvdimm/btt: add error handling support for add_disk()Luis Chamberlain1-1/+3
We never checked for errors on add_disk() as this function returned void. Now that this is fixed, use the shiny new error handling. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Link: https://lore.kernel.org/r/20211103230437.1639990-3-mcgrof@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-04nvdimm/btt: use goto error labels on btt_blk_init()Luis Chamberlain1-6/+10
This will make it easier to share common error paths. Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Link: https://lore.kernel.org/r/20211103230437.1639990-2-mcgrof@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-04loop: Remove duplicate assignmentsluo penghao1-1/+0
The assignment and operation there will be overwritten later, so it should be deleted. The clang_analyzer complains as follows: drivers/block/loop.c:2330:2 warning: Value stored to 'err' is never read change in v2: Repair the sending email box Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: luo penghao <luo.penghao@zte.com.cn> Link: https://lore.kernel.org/r/20211104064546.3074-1-luo.penghao@zte.com.cn Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-04drbd: Fix double free problem in drbd_create_deviceWu Bo1-3/+1
In drbd_create_device(), the 'out_no_io_page' lable has called blk_cleanup_disk() when return failed. So remove the 'out_cleanup_disk' lable to avoid double free the disk pointer. Fixes: e92ab4eda516 ("drbd: add error handling support for add_disk()") Signed-off-by: Wu Bo <wubo40@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/1636013229-26309-1-git-send-email-wubo40@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-04drm/nouveau: Add a dedicated mutex for the clients listJeremy Cline2-4/+11
Rather than protecting the nouveau_drm clients list with the lock within the "client" nouveau_cli, add a dedicated lock to serialize access to the list. This is both clearer and necessary to avoid lockdep being upset with us when we need to iterate through all the clients in the list and potentially lock their mutex, which is the same class as the lock protecting the entire list. Cc: stable@vger.kernel.org # 5.4+ Signed-off-by: Jeremy Cline <jcline@redhat.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Tested-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Karol Herbst <kherbst@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201125202648.5220-3-jcline@redhat.com Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/14
2021-11-04drm/nouveau: use drm_dev_unplug() during device removalJeremy Cline1-1/+1
Nouveau does not currently support hot-unplugging, but it still makes sense to switch from drm_dev_unregister() to drm_dev_unplug(). drm_dev_unplug() calls drm_dev_unregister() after marking the device as unplugged, but only after any device critical sections are finished. Since nouveau isn't using drm_dev_enter() and drm_dev_exit(), there are no critical sections so this is nearly functionally equivalent. However, the DRM layer does check to see if the device is unplugged, and if it is returns appropriate error codes. In the future nouveau can add critical sections in order to truly support hot-unplugging. Cc: stable@vger.kernel.org # 5.4+ Signed-off-by: Jeremy Cline <jcline@redhat.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Tested-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Karol Herbst <kherbst@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201125202648.5220-2-jcline@redhat.com Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/14
2021-11-04drm/nouveau/svm: Fix refcount leak bug and missing check against null bugChenyuan Mi1-0/+4
The reference counting issue happens in one exception handling path of nouveau_svmm_bind(). When cli->svm.svmm is null, the function forgets to decrease the refcount of mm increased by get_task_mm(), causing a refcount leak. Fix this issue by using mmput() to decrease the refcount in the exception handling path. Also, the function forgets to do check against null when get mm by get_task_mm(). Fix this issue by adding null check after get mm by get_task_mm(). Signed-off-by: Chenyuan Mi <cymi20@fudan.edu.cn> Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Fixes: 822cab6150d3 ("drm/nouveau/svm: check for SVM initialized before migrating") Reviewed-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Reviewed-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Karol Herbst <kherbst@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210907122633.16665-1-cymi20@fudan.edu.cn Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/14
2021-11-04drm/bridge: analogix_dp: Make PSR-exit block lessBrian Norris1-2/+12
Prior to commit 6c836d965bad ("drm/rockchip: Use the helpers for PSR"), "PSR exit" used non-blocking analogix_dp_send_psr_spd(). The refactor started using the blocking variant, for a variety of reasons -- quoting Sean Paul's potentially-faulty memory: """ - To avoid racing a subsequent PSR entry (if exit takes a long time) - To avoid racing disable/modeset - We're not displaying new content while exiting PSR anyways, so there is minimal utility in allowing frames to be submitted - We're lying to userspace telling them frames are on the screen when we're just dropping them on the floor """ However, I'm finding that this blocking transition is causing upwards of 60+ ms of unneeded latency on PSR-exit, to the point that initial cursor movements when leaving PSR are unbearably jumpy. It turns out that we need to meet in the middle somewhere: Sean is right that we were "lying to userspace" with a non-blocking PSR-exit, but the new blocking behavior is also waiting too long: According to the eDP specification, the sink device must support PSR entry transitions from both state 4 (ACTIVE_RESYNC) and state 0 (INACTIVE). It also states that in ACTIVE_RESYNC, "the Sink device must display the incoming active frames from the Source device with no visible glitches and/or artifacts." Thus, for our purposes, we only need to wait for ACTIVE_RESYNC before moving on; we are ready to display video, and subsequent PSR-entry is safe. Tested on a Samsung Chromebook Plus (i.e., Rockchip RK3399 Gru Kevin), where this saves about 60ms of latency, for PSR-exit that used to take about 80ms. Fixes: 6c836d965bad ("drm/rockchip: Use the helpers for PSR") Cc: <stable@vger.kernel.org> Cc: Zain Wang <wzz@rock-chips.com> Cc: Tomasz Figa <tfiga@chromium.org> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Sean Paul <seanpaul@chromium.org> Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211103135112.v3.1.I67612ea073c3306c71b46a87be894f79707082df@changeid
2021-11-04drm/bridge: anx7625: add HDMI audio functionXin Ji2-0/+231
Add audio HDMI codec function support, enable it through device true flag "analogix,audio-enable". Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Xin Ji <xji@analogixsemi.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211104033857.2634562-1-xji@analogixsemi.com
2021-11-04drm/bridge: anx7625: add MIPI DPI input featureXin Ji2-60/+205
The basic anx7625 driver only support MIPI DSI rx signal input. This patch add MIPI DPI rx input configuration support, after apply this patch, the driver can support DSI rx or DPI rx by adding 'bus-type' in DT. Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Xin Ji <xji@analogixsemi.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211104033639.2634502-1-xji@analogixsemi.com
2021-11-04drm/bridge: anx7625: fix not correct return valueXin Ji1-2/+2
At some time, the original code may return non zero value, force return 0 if operation finished. Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Xin Ji <xji@analogixsemi.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211104033609.2634452-1-xji@analogixsemi.com
2021-11-04drm/i915: fixup dma_fence_wait usageMatthew Auld1-1/+1
dma_fence_wait expects a boolean for whether it should be interruptible, not a timeout value. Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211102155055.100138-1-matthew.auld@intel.com
2021-11-04drm/vc4: Increase the core clock based on HVS loadMaxime Ripard3-9/+118
Depending on a given HVS output (HVS to PixelValves) and input (planes attached to a channel) load, the HVS needs for the core clock to be raised above its boot time default. Failing to do so will result in a vblank timeout and a stalled display pipeline. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20211025152903.1088803-11-maxime@cerno.tech
2021-11-04drm/vc4: hdmi: Enable the scrambler on reconnectionMaxime Ripard1-0/+3
If we have a state already and disconnect/reconnect the display, the SCDC messages won't be sent again since we didn't go through a disable / enable cycle. In order to fix this, let's call the vc4_hdmi_enable_scrambling function in the detect callback if there is a mode and it needs the scrambler to be enabled. Fixes: c85695a2016e ("drm/vc4: hdmi: Enable the scrambler") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20211025152903.1088803-10-maxime@cerno.tech
2021-11-04drm/vc4: hdmi: Raise the maximum clock rateMaxime Ripard1-1/+1
Now that we have the infrastructure in place, we can raise the maximum pixel rate we can reach for HDMI0 on the BCM2711. HDMI1 is left untouched since its pixelvalve has a smaller FIFO and would need a clock faster than what we can provide to support the same modes. Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20211025152903.1088803-9-maxime@cerno.tech
2021-11-04drm/vc4: Leverage the load tracker on the BCM2711Maxime Ripard4-21/+10
The load tracker was initially designed to report and warn about a load too high for the HVS. To do so, it computes for each plane the impact it's going to have on the HVS, and will warn (if it's enabled) if we go over what the hardware can process. While the limits being used are a bit irrelevant to the BCM2711, the algorithm to compute the HVS load will be one component used in order to compute the core clock rate on the BCM2711. Let's remove the hooks to prevent the load tracker to do its computation, but since we don't have the same limits, don't check them against them, and prevent the debugfs file to enable it from being created. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20211025152903.1088803-8-maxime@cerno.tech
2021-11-04drm/vc4: crtc: Add some loggingMaxime Ripard1-0/+6
The encoder retrieval code has been a source of bugs and glitches in the past and the crtc <-> encoder association been wrong in a number of different ways. Add some logging to quickly spot issues if they occur. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20211025152903.1088803-7-maxime@cerno.tech
2021-11-04drm/vc4: crtc: Rework the encoder retrieval code (again)Maxime Ripard2-24/+10
It turns out the encoder retrieval code, in addition to being unnecessarily complicated, has a bug when only the planes and crtcs are affected by a given atomic commit. Indeed, in such a case, either drm_atomic_get_old_connector_state or drm_atomic_get_new_connector_state will return NULL and thus our encoder retrieval code will not match on anything. We can however simplify the code by using drm_for_each_encoder_mask, the drm_crtc_state storing the encoders a given CRTC is connected to directly and without relying on any other state. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20211025152903.1088803-6-maxime@cerno.tech
2021-11-04drm/vc4: crtc: Add encoder to vc4_crtc_config_pv prototypeMaxime Ripard1-4/+3
vc4_crtc_config_pv() retrieves the encoder again, even though its only caller, vc4_crtc_atomic_enable(), already did. Pass the encoder pointer as an argument instead of going through all the connectors to retrieve it again. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20211025152903.1088803-5-maxime@cerno.tech
2021-11-04drm/vc4: Make vc4_crtc_get_encoder publicMaxime Ripard2-4/+9
We'll need that function in vc4_kms to compute the core clock rate requirements. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20211025152903.1088803-4-maxime@cerno.tech
2021-11-04drm/vc4: hdmi: Fix HPD GPIO detectionMaxime Ripard1-3/+3
Prior to commit 6800234ceee0 ("drm/vc4: hdmi: Convert to gpiod"), in the detect hook, if we had an HPD GPIO we would only rely on it and return whatever state it was in. However, that commit changed that by mistake to only consider the case where we have a GPIO and it returns a logical high, and would fall back to the other methods otherwise. Since we can read the EDIDs when the HPD signal is low on some displays, we changed the detection status from disconnected to connected, and we would ignore an HPD pulse. Fixes: 6800234ceee0 ("drm/vc4: hdmi: Convert to gpiod") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20211025152903.1088803-3-maxime@cerno.tech
2021-11-04drm/vc4: hdmi: Remove the DDC probing for status detectionMaxime Ripard1-2/+0
Commit 9d44abbbb8d5 ("drm/vc4: Fall back to using an EDID probe in the absence of a GPIO.") added some code to read the EDID through DDC in the HDMI driver detect hook since the Pi3 had no HPD GPIO back then. However, commit b1b8f45b3130 ("ARM: dts: bcm2837: Add missing GPIOs of Expander") changed that a couple of years later. This causes an issue though since some TV (like the LG 55C8) when it comes out of standy will deassert the HPD line, but the EDID will remain readable. It causes an issues nn platforms without an HPD GPIO, like the Pi4, where the DDC probing will be our primary mean to detect a display, and thus we will never detect the HPD pulse. This was fine before since the pulse was small enough that we would never detect it, and we also didn't have anything (like the scrambler) that needed to be set up in the display. However, now that we have both, the display during the HPD pulse will clear its scrambler status, and since we won't detect the disconnect/reconnect cycle we will never enable the scrambler back. As our main reason for that DDC probing is gone, let's just remove it. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20211025152903.1088803-2-maxime@cerno.tech
2021-11-04drm/radeon: use dma_resv_wait_timeout() instead of manually waitingChristian König1-8/+5
Don't touch the exclusive fence manually here, but rather use the general dma_resv function. We did that for better hw reset handling but this doesn't necessary work correctly. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deuche <alexander.deucher@amd.com> Acked-by: Nirmoy Das <nirmoy.das@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211028132630.2330-6-christian.koenig@amd.com
2021-11-04dma-buf/poll: Get a file reference for outstanding fence callbacksMichel Dänzer1-6/+12
This makes sure we don't hit the BUG_ON(dmabuf->cb_in.active || dmabuf->cb_out.active); in dma_buf_release, which could be triggered by user space closing the dma-buf file description while there are outstanding fence callbacks from dma_buf_poll. Cc: stable@vger.kernel.org Signed-off-by: Michel Dänzer <mdaenzer@redhat.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210723075857.4065-1-michel@daenzer.net Signed-off-by: Christian König <christian.koenig@amd.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.