| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Now that we have a list of struct ocelot_bridge_vlan entries, we can
rewrite the pvid logic to simply point to one of those structures,
instead of having a separate structure with a "bool valid".
The NULL pointer will represent the lack of a bridge pvid (not to be
confused with the lack of a hardware pvid on the port, that is present
at all times).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The ocelot switchdev driver does not include the CPU port in the list of
flooding destinations for unknown traffic, instead that traffic is
supposed to match FDB entries to reach the CPU.
The addresses it installs are:
(a) the station MAC address, in ocelot_probe_port() and later during
runtime in ocelot_port_set_mac_address(). These are the VLAN-unaware
addresses. The VLAN-aware addresses are in ocelot_vlan_vid_add().
(b) multicast addresses added with dev_mc_add() (not bridge host MDB
entries) in ocelot_mc_sync()
(c) multicast destination MAC addresses for MRP in ocelot_mrp_save_mac(),
to make sure those are dropped (not forwarded) by the bridging
service, just trapped to the CPU
So we can see that the logic is slightly buggy ever since the initial
commit a556c76adc05 ("net: mscc: Add initial Ocelot switch support").
This is because, when ocelot_probe_port() runs, the port pvid is 0.
Then we join a VLAN-aware bridge, the pvid becomes 1, we call
ocelot_port_set_mac_address(), this learns the new MAC address in VID 1
(also fails to forget the old one, since it thinks it's in VID 1, but
that's not so important). Then when we leave the VLAN-aware bridge,
outside world is unable to ping our new MAC address because it isn't
learned in VID 0, the VLAN-unaware pvid.
[ note: this is strictly based on static analysis, I don't have hardware
to test. But there are also many more corner cases ]
The basic idea is that we should have a separation of concerns, and the
FDB entries used for standalone operation should be managed by the
driver, and the FDB entries used by the bridging service should be
managed by the bridge. So the standalone and VLAN-unaware bridge FDB
entries should not follow the bridge PVID, because that will only be
active when the bridge is VLAN-aware. So since the port pvid is
coincidentally zero during probe time, just make those entries
statically go to VID 0.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
At present, the ocelot driver accepts a single egress-untagged bridge
VLAN, meaning that this sequence of operations:
ip link add br0 type bridge vlan_filtering 1
ip link set swp0 master br0
bridge vlan add dev swp0 vid 2 pvid untagged
fails because the bridge automatically installs VID 1 as a pvid & untagged
VLAN, and vid 2 would be the second untagged VLAN on this port. It is
necessary to delete VID 1 before proceeding to add VID 2.
This limitation comes from the fact that we operate the port tag, when
it has an egress-untagged VID, in the OCELOT_PORT_TAG_NATIVE mode.
The ocelot switches do not have full flexibility and can either have one
single VID as egress-untagged, or all of them.
There are use cases for having all VLANs as egress-untagged as well, and
this patch adds support for that.
The change rewrites ocelot_port_set_native_vlan() into a more generic
ocelot_port_manage_port_tag() function. Because the software bridge's
state, transmitted to us via switchdev, can become very complex, we
don't attempt to track all possible state transitions, but instead take
a more declarative approach and just make ocelot_port_manage_port_tag()
figure out which more to operate in:
- port is VLAN-unaware: the classified VLAN (internal, unrelated to the
802.1Q header) is not inserted into packets on egress
- port is VLAN-aware:
- port has tagged VLANs:
-> port has no untagged VLAN: set up as pure trunk
-> port has one untagged VLAN: set up as trunk port + native VLAN
-> port has more than one untagged VLAN: this is an invalid config
which is rejected by ocelot_vlan_prepare
- port has no tagged VLANs
-> set up as pure egress-untagged port
We don't keep the number of tagged and untagged VLANs, we just count the
structures we keep.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
First and foremost, the driver currently allocates a constant sized
4K * u32 (16KB memory) array for the VLAN masks. However, a typical
application might not need so many VLANs, so if we dynamically allocate
the memory as needed, we might actually save some space.
Secondly, we'll need to keep more advanced bookkeeping of the VLANs we
have, notably we'll have to check how many untagged and how many tagged
VLANs we have. This will have to stay in a structure, and allocating
another 16 KB array for that is again a bit too much.
So refactor the bridge VLANs in a linked list of structures.
The hook points inside the driver are ocelot_vlan_member_add() and
ocelot_vlan_member_del(), which previously used to operate on the
ocelot->vlan_mask[vid] array element.
ocelot_vlan_member_add() and ocelot_vlan_member_del() used to call
ocelot_vlan_member_set() to commit to the ocelot->vlan_mask.
Additionally, we had two calls to ocelot_vlan_member_set() from outside
those callers, and those were directly from ocelot_vlan_init().
Those calls do not set up bridging service VLANs, instead they:
- clear the VLAN table on reset
- set the port pvid to the value used by this driver for VLAN-unaware
standalone port operation (VID 0)
So now, when we have a structure which represents actual bridge VLANs,
VID 0 doesn't belong in that structure, since it is not part of the
bridging layer.
So delete the middle man, ocelot_vlan_member_set(), and let
ocelot_vlan_init() call directly ocelot_vlant_set_mask() which forgoes
any data structure and writes directly to hardware, which is all that we
need.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is a cosmetic patch which clarifies what are the port tagging
options for Ocelot switches.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Saeed Mahameed says:
====================
mlx5-fixes-2021-10-20
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A race condition is possible when writing to events_queue_size where the
events kfifo is freed during the execution of a kfifo_in(), resulting in
a use-after-free. This patch prevents such a scenario by protecting the
events queue in operation with a spinlock and locking before performing
the events queue size adjustment.
The existing events_lock mutex is renamed to events_out_lock to reflect
that it only protects events queue out operations. Because the events
queue in operations can occur in an interrupt context, a new
events_in_lock spinlock is introduced and utilized.
Fixes: feff17a550c7 ("counter: Implement events_queue_size sysfs attribute")
Cc: David Lechner <david@lechnology.com>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Link: https://lore.kernel.org/r/20211021103540.955639-1-vilhelm.gray@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
With the removal of the chrdev_lock atomic flag, the counter-sysfs.c and
counter-chrdev.c no longer needs to include the atomic.h header file.
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Link: https://lore.kernel.org/r/20211021103514.955622-1-vilhelm.gray@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In current code, the devres group for aggregate master is left open
after call to component_master_add_*(). This leads to problems when the
master does further managed allocations on its own. When any
participating driver calls component_del(), this leads to immediate
release of resources.
This came up when investigating a page fault occurring with i915 DRM
driver unbind with 5.15-rc1 kernel. The following sequence occurs:
i915_pci_remove()
-> intel_display_driver_unregister()
-> i915_audio_component_cleanup()
-> component_del()
-> component.c:take_down_master()
-> hdac_component_master_unbind() [via master->ops->unbind()]
-> devres_release_group(master->parent, NULL)
With older kernels this has not caused issues, but with audio driver
moving to use managed interfaces for more of its allocations, this no
longer works. Devres log shows following to occur:
component_master_add_with_match()
[ 126.886032] snd_hda_intel 0000:00:1f.3: DEVRES ADD 00000000323ccdc5 devm_component_match_release (24 bytes)
[ 126.886045] snd_hda_intel 0000:00:1f.3: DEVRES ADD 00000000865cdb29 grp< (0 bytes)
[ 126.886049] snd_hda_intel 0000:00:1f.3: DEVRES ADD 000000001b480725 grp< (0 bytes)
audio driver completes its PCI probe()
[ 126.892238] snd_hda_intel 0000:00:1f.3: DEVRES ADD 000000001b480725 pcim_iomap_release (48 bytes)
component_del() called() at DRM/i915 unbind()
[ 137.579422] i915 0000:00:02.0: DEVRES REL 00000000ef44c293 grp< (0 bytes)
[ 137.579445] snd_hda_intel 0000:00:1f.3: DEVRES REL 00000000865cdb29 grp< (0 bytes)
[ 137.579458] snd_hda_intel 0000:00:1f.3: DEVRES REL 000000001b480725 pcim_iomap_release (48 bytes)
So the "devres_release_group(master->parent, NULL)" ends up freeing the
pcim_iomap allocation. Upon next runtime resume, the audio driver will
cause a page fault as the iomap alloc was released without the driver
knowing about it.
Fix this issue by using the "struct master" pointer as identifier for
the devres group, and by closing the devres group after
the master->ops->bind() call is done. This allows devres allocations
done by the driver acting as master to be isolated from the binding state
of the aggregate driver. This modifies the logic originally introduced in
commit 9e1ccb4a7700 ("drivers/base: fix devres handling for master device")
Fixes: 9e1ccb4a7700 ("drivers/base: fix devres handling for master device")
Cc: stable@vger.kernel.org
Acked-by: Imre Deak <imre.deak@intel.com>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
BugLink: https://gitlab.freedesktop.org/drm/intel/-/issues/4136
Link: https://lore.kernel.org/r/20211013161345.3755341-1-kai.vehmanen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since the uvc video device is created on demand, we have to ensure
that the struct is always zeroed. Otherwise the previous settings
might collide with the new values.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20211017215017.18392-7-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If the streaming endpoint is not enabled, the worker has nothing to do.
In the case buffers are still queued, this patch ensures that it will bail
out without handling any data.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20211017215017.18392-6-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch ensures that the video pump thread will only be scheduled if
the uvc is really in streaming state. This way the worker will not have
to run on an empty queue.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20211017215017.18392-5-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The reason that the ep_queue has failed could be a disabled endpoint.
In that case it is not guaranteed that the ep->desc is still valid.
This patch adds a check for NULL.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20211017215017.18392-4-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When enabling info debugging for the uvc gadget, the bind and unbind
infos use different formats. Change the unbind to visually match the
bind.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20211017215017.18392-3-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Exynos MCT and Samsung PWM Timer clocksource drivers are not usable
on anything else than Samsung Exynos, S3C or S5P SoC platforms. These
are integral parts of a SoC. Even though the drivers are not user
selectable, still document the hardware architecture explicitly with
depends on ARCH_EXYNOS and others. This also serves a purpose of
documenting use-case, if someone ever wonders whether to select the
driver for his platform. No functional change, because drivers are
already selected by the platform described in depends. We follow similar
approach also for other SoC-specific drivers.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211021063500.39314-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The uvc request headerlen of 2 was defined as UVCG_REQUEST_HEADER_LEN
in commit e81e7f9a0eb9 ("usb: gadget: uvc: add scatter gather support").
We missed to use it consistently. This patch fixes that.
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20211018072059.11465-1-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Instead of maintaining a single-linked list of devices that must be
searched linearly in .remove() just use spi_set_drvdata() to remember the
link between the spi device and the driver struct. Then the global list
and the next member can be dropped.
This simplifies the driver, reduces the memory footprint and the time to
search the list. Also it makes obvious that there is always a corresponding
driver struct for a given device in .remove(), so the error path for
!max3421_hcd can be dropped, too.
As a side effect this fixes a data inconsistency when .probe() races with
itself for a second max3421 device in manipulating max3421_hcd_list. A
similar race is fixed in .remove(), too.
Fixes: 2d53139f3162 ("Add support for using a MAX3421E chip as a host driver.")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20211018204028.2914597-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If role is changed without the "none" step, A- and B- valid session could
be set at the same time. It is an issue.
This patch resets A-session if role switch sets B-session, and resets
B-session if role switch sets A-session.
Then, it is possible to change the role without the "none" step.
Fixes: 17f934024e84 ("usb: dwc2: override PHY input signals with usb role switch support")
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20211005095305.66397-4-amelie.delaunay@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In case of USB_DR_MODE_PERIPHERAL, the OTG clock is disabled at the end of
the probe (it is not the case if USB_DR_MODE_HOST or USB_DR_MODE_OTG).
The clock is then enabled on udc_start.
If dwc2_drd_role_sw_set is called before udc_start (it is the case if the
usb cable is plugged at boot), GOTGCTL and GUSBCFG registers cannot be
read/written, so session cannot be overridden.
To avoid this case, check the ll_hw_enabled value and enable the clock if
it is available, and disable it after the override.
Fixes: 17f934024e84 ("usb: dwc2: override PHY input signals with usb role switch support")
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20211005095305.66397-3-amelie.delaunay@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Instead of forcing the role to Device, check the dr_mode configuration.
If the core is Host only, force the mode to Host, this to avoid the
dwc2_force_mode warning:
WARNING: CPU: 1 PID: 21 at drivers/usb/dwc2/core.c:615 dwc2_drd_init+0x104/0x17c
When forcing mode to Host, dwc2_force_mode may sleep the time the host
role is applied. To avoid sleeping while atomic context, move the call
to dwc2_force_mode after spin_unlock_irqrestore. It is safe, as
interrupts are not yet unmasked here.
Fixes: 17f934024e84 ("usb: dwc2: override PHY input signals with usb role switch support")
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20211005095305.66397-2-amelie.delaunay@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
While going into S3 or S4 suspend, an OHCI host controller can
generate interrupt requests if the INTR_SF enable flag is set. The
interrupt handler routine isn't prepared for this and it doesn't turn
off the flag, causing an interrupt storm.
To fix this problem, make ohci_rh_suspend() always disable INTR_SF
interrupts after processing the done list and the ED unlinks but
before the controller goes into the suspended (non-UsbOperational)
state. There's no reason to leave the flag enabled, since a
suspended controller doesn't generate Start-of-Frame packets.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
Link: https://lore.kernel.org/r/1634095928-29639-1-git-send-email-zhuyinbo@loongson.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replacing dma_pool_alloc/memset() with dma_pool_zalloc()
to simplify the code.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20211018131645.434-1-caihuoqing@baidu.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replacing dma_pool_alloc/memset() with dma_pool_zalloc()
to simplify the code.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20211018131709.487-1-caihuoqing@baidu.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Moving the driver-specific mmap code into a GEM object function allows
for using DRM helpers for various mmap callbacks.
The respective rockchip functions are being removed. The file_operations
structure fops is now being created by the helper macro
DEFINE_DRM_GEM_FOPS().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
[On rk3288 (pinky), rk3399 (gru-kevin, puma) and rk3328 (rock64)]
Tested-by: Heiko Stuebner <heiko@sntech.de>
[On RK3188/RK3066 (without iommu)]
Tested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210624095502.8945-1-tzimmermann@suse.de
|
|
This reverts commit 05734ca2a8f76c9eb3890b3c9dfc3467f03105c1.
It's not graceful, instead it leads to boot time warning splats in the
case it is supposed to handle gracefully. Apparently the BIOS/GOP
enabling the port we end up skipping leads to state readout
problems. Back to the drawing board.
References: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_21255/bat-adlp-4/boot0.txt
Fixes: 05734ca2a8f7 ("drm/i915/bios: gracefully disable dual eDP for now")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211019114334.24643-1-jani.nikula@intel.com
|
|
This driver exposes a standard TTY interface on top of the rpmsg
framework through a rpmsg service.
This driver supports multi-instances, offering a /dev/ttyRPMSGx entry
per rpmsg endpoint.
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20211015094701.5732-3-arnaud.pouliquen@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Return the rpmsg buffer MTU for sending message, so rpmsg users
can split a long message in several sub rpmsg buffers.
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20211015094701.5732-2-arnaud.pouliquen@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The ordering of operations in pci_back_from_sleep() is incorrect,
because the device may be in D3cold when it runs and pci_enable_wake()
needs to access the device's configuration space which cannot be
done in D3cold.
Fix this by calling pci_set_power_state() to put the device into D0
before calling pci_enable_wake() for it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
When the driver resumes, the tcc offset is set back to its previous
value. But this only works if the value was user defined as otherwise
the offset isn't saved. This asymmetric logic is harder to maintain and
introduced some issues.
Improve the logic by saving the tcc offset in a suspend op, so the right
value is always restored after a resume.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Srinivas Pandruvada <srinivas.pI andruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20210909085613.5577-3-atenart@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
regulator/clock: Convert the s2m and s5m DT bindings to schema
Tagged to allow further bindings to rely on these.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
When 'iio_dev_opaque->buffer_ioctl_handler' alloc fails in
iio_buffers_alloc_sysfs_and_mask(), the 'attrs' allocated in
iio_buffer_register_legacy_sysfs_groups() will be leaked:
unreferenced object 0xffff888108568d00 (size 128):
comm "88", pid 2014, jiffies 4294963294 (age 26.920s)
hex dump (first 32 bytes):
80 3e da 02 80 88 ff ff 00 3a da 02 80 88 ff ff .>.......:......
00 35 da 02 80 88 ff ff 00 38 da 02 80 88 ff ff .5.......8......
backtrace:
[<0000000095a9e51e>] __kmalloc+0x1a3/0x2f0
[<00000000faa3735e>] iio_buffers_alloc_sysfs_and_mask+0xfa3/0x1480 [industrialio]
[<00000000a46384dc>] __iio_device_register+0x52e/0x1b40 [industrialio]
[<00000000210af05e>] __devm_iio_device_register+0x22/0x80 [industrialio]
[<00000000730d7b41>] adjd_s311_probe+0x195/0x200 [adjd_s311]
[<00000000c0f70eb9>] i2c_device_probe+0xa07/0xbb0
The iio_buffer_register_legacy_sysfs_groups() is
called in __iio_buffer_alloc_sysfs_and_mask(),
so move the iio_buffer_unregister_legacy_sysfs_groups()
into __iio_buffer_free_sysfs_and_mask(), then the memory
will be freed.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: d9a625744ed0 ("iio: core: merge buffer/ & scan_elements/ attributes")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20211018063718.1971240-1-yangyingliang@huawei.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Tegra20 EMC driver uses simple devfreq governor. Add simple devfreq
governor to the list of the Tegra20 EMC driver module softdeps to allow
userspace initramfs tools like dracut to automatically pull the devfreq
module into ramfs image together with the EMC module.
Reported-by: Nicolas Chauvet <kwizart@gmail.com>
Suggested-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20211019231524.888-1-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
|
|
On KMB, ADV bridge must be programmed and powered on prior to
MIPI DSI HW initialization.
v2: changed to atomic_bridge_chain_enable (Sam)
Fixes: 98521f4d4b4c ("drm/kmb: Mipi DSI part of the display driver")
Co-developed-by: Edmund Dea <edmund.j.dea@intel.com>
Signed-off-by: Edmund Dea <edmund.j.dea@intel.com>
Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211019230719.789958-1-anitha.chrisanthus@intel.com
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
|
|
Check for Overflow bits for layer3 in the irq handler.
Fixes: 7f7b96a8a0a1 ("drm/kmb: Add support for KeemBay Display")
Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211013233632.471892-5-anitha.chrisanthus@intel.com
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
|
|
Due to HW limitations, KMB cannot change height, width, or
pixel format after initial plane configuration.
v2: removed memset disp_cfg as it is already zero.
Fixes: 7f7b96a8a0a1 ("drm/kmb: Add support for KeemBay Display")
Signed-off-by: Edmund Dea <edmund.j.dea@intel.com>
Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211013233632.471892-4-anitha.chrisanthus@intel.com
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
|
|
Don't clear the shared DPHY registers common to MIPI Rx and MIPI Tx during
DSI initialization since this was causing MIPI Rx reset. Rest of the
writes are bitwise, so will not affect Mipi Rx side.
Fixes: 98521f4d4b4c ("drm/kmb: Mipi DSI part of the display driver")
Signed-off-by: Edmund Dea <edmund.j.dea@intel.com>
Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211013233632.471892-3-anitha.chrisanthus@intel.com
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
|
|
KMB only supports single resolution(1080p), this commit checks for
1920x1080x60 or 1920x1080x59 in crtc_mode_valid.
Also, modes with vfp < 4 are not supported in KMB display. This change
prunes display modes with vfp < 4.
v2: added vfp check
Fixes: 7f7b96a8a0a1 ("drm/kmb: Add support for KeemBay Display")
Co-developed-by: Edmund Dea <edmund.j.dea@intel.com>
Signed-off-by: Edmund Dea <edmund.j.dea@intel.com>
Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link:https://patchwork.freedesktop.org/patch/msgid/20211013233632.471892-2-anitha.chrisanthus@intel.com
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
|
|
Use a different value for system clock offset in the
ppl/llp ratio calculations for clocks higher than 500 Mhz.
Fixes: 98521f4d4b4c ("drm/kmb: Mipi DSI part of the display driver")
Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211013233632.471892-1-anitha.chrisanthus@intel.com
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
|
|
This adjusts sync values according to the datasheet
Fixes: 1c243751c095 ("drm/panel: ilitek-ili9881c: add support for Feixin K101-IM2BYL02 panel")
Co-developed-by: Marius Gripsgard <marius@ubports.com>
Signed-off-by: Dan Johansen <strit@manjaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210818214818.298089-1-strit@manjaro.org
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
|
|
The mxsfb->crtc.funcs may already be NULL when unloading the driver,
in which case calling mxsfb_irq_disable() via drm_irq_uninstall() from
mxsfb_unload() leads to NULL pointer dereference.
Since all we care about is masking the IRQ and mxsfb->base is still
valid, just use that to clear and mask the IRQ.
Fixes: ae1ed00932819 ("drm: mxsfb: Stop using DRM simple display pipeline helper")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Abrecht <public@danielabrecht.ch>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stefan Agner <stefan@agner.ch>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211016210446.171616-1-marex@denx.de
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
|
|
This driver supports both the legacy controller (am33xx) and the
extended one (am437x), so let's add a new compatible.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211015081506.933180-46-miquel.raynal@bootlin.com
|
|
The driver was updating the port uartclk before setting the new rate in
an attempt to avoid having the clock notifier redundantly update the
divisors.
The set_termios() callback is however called under the termios semaphore
and tty-port mutex so the worker scheduled by the clock notifier will
block in serial8250_update_uartclk() until the uartclk and divisors have
been updated anyway.
Drop the unnecessary swaps and incorrect comment and simply update the
uartclk field if the clock-rate change was successful.
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20211015111422.1027-4-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename a couple of oddly named labels that are used to unlock before
returning after what they do (rather than after the context they are
used in) to improve readability.
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20211015111422.1027-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 868f3ee6e452 ("serial: 8250: Add 8250 port clock update method")
added a hack to support SoCs where the UART reference clock can
change behind the back of the driver but failed to add the proper
locking.
First, make sure to take a reference to the tty struct to avoid
dereferencing a NULL pointer if the clock change races with a hangup.
Second, the termios semaphore must be held during the update to prevent
a racing termios change.
Fixes: 868f3ee6e452 ("serial: 8250: Add 8250 port clock update method")
Fixes: c8dff3aa8241 ("serial: 8250: Skip uninitialized TTY port baud rate update")
Cc: stable@vger.kernel.org # 5.9
Cc: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20211015111422.1027-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Disable DMA request line (if enabled) to switch in PIO mode in throttle
ops, so the RX data gets queues into the FIFO. The hardware flow control
is triggered when the RX FIFO is full.
Switch back to DMA mode (re-enable DMA request line) in unthrottle ops.
Hardware flow control is stopped when FIFO is not full anymore.
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Link: https://lore.kernel.org/r/20211020150332.10214-4-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch reworks RX support over DMA to improve reliability:
- change dma buffer cyclic configuration by using 2 periods. DMA buffer
data are handled by a flip-flop between the 2 periods in order to avoid
risk of data loss/corruption
- change the size of dma buffer to 4096 to limit overruns
- add rx errors management (breaks, parity, framing and overrun).
When an error occurs on the uart line, the dma request line is masked at
HW level. The SW must 1st clear DMAR (dma request line enable), to
handle the error, then re-enable DMAR to recover. So, any correct data
is taken from the DMA buffer, before handling the error itself. Then
errors are handled from RDR/ISR/FIFO (e.g. in PIO mode). Last, DMA
reception is resumed.
- add a condition on DMA request line in DMA RX routines in order to
switch to PIO mode when no DMA request line is disabled, even if the DMA
channel is still enabled.
When the UART is wakeup source and is configured to use DMA for RX, any
incoming data that wakes up the system isn't correctly received.
At data reception, the irq_handler handles the WUF irq, and then the
data reception over DMA.
As the DMA transfer has been terminated at suspend, and will be restored
by resume callback (which has no yet been called by system), the data
can't be received.
The wake-up data has to be handled in PIO mode while suspend callback
has not been called.
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Link: https://lore.kernel.org/r/20211020150332.10214-3-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Re-introduce an irq flag condition in usart_receive_chars.
This condition has been deleted by commit 75f4e830fa9c ("serial: do not
restore interrupt state in sysrq helper").
This code was present to handle threaded case, and has been removed
because it is no more needed in this case. Nevertheless an irq safe lock
is still needed in some cases, when DMA should be stopped to receive errors
or breaks in PIO mode.
This patch is a precursor to the complete rework or stm32 serial driver
DMA implementation.
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Link: https://lore.kernel.org/r/20211020150332.10214-2-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This revert commit c4baad5029 ("virtio-console: avoid DMA from stack")
hvc framework will never pass stack memory to the put_chars() function,
So the calling of kmemdup() is unnecessary, we can remove it.
Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com>
Reviewed-by: Shile Zhang <shile.zhang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20211015024658.1353987-4-xianting.tian@linux.alibaba.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
As well known, hvc backend can register its opertions to hvc backend.
the operations contain put_chars(), get_chars() and so on.
Some hvc backend may do dma in its operations. eg, put_chars() of
virtio-console. But in the code of hvc framework, it may pass DMA
incapable memory to put_chars() under a specific configuration, which
is explained in commit c4baad5029(virtio-console: avoid DMA from stack):
1, c[] is on stack,
hvc_console_print():
char c[N_OUTBUF] __ALIGNED__;
cons_ops[index]->put_chars(vtermnos[index], c, i);
2, ch is on stack,
static void hvc_poll_put_char(,,char ch)
{
struct tty_struct *tty = driver->ttys[0];
struct hvc_struct *hp = tty->driver_data;
int n;
do {
n = hp->ops->put_chars(hp->vtermno, &ch, 1);
} while (n <= 0);
}
Commit c4baad5029 is just the fix to avoid DMA from stack memory, which
is passed to virtio-console by hvc framework in above code. But I think
the fix is aggressive, it directly uses kmemdup() to alloc new buffer
from kmalloc area and do memcpy no matter the memory is in kmalloc area
or not. But most importantly, it should better be fixed in the hvc
framework, by changing it to never pass stack memory to the put_chars()
function in the first place. Otherwise, we still face the same issue if
a new hvc backend using dma added in the furture.
In this patch, add 'char cons_outbuf[]' as part of 'struct hvc_struct',
so hp->cons_outbuf is no longer the stack memory, we can use it in above
cases safely. We also add lock to protect cons_outbuf instead of using
the global lock of hvc.
Introduce another array(cons_hvcs[]) for hvc pointers next to the
cons_ops[] and vtermnos[] arrays. With the array, we can easily find
hvc's cons_outbuf and its lock.
With the patch, we can revert the fix c4baad5029.
Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com>
Signed-off-by: Shile Zhang <shile.zhang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20211015024658.1353987-3-xianting.tian@linux.alibaba.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use L1_CACHE_BYTES as the dma alignment size, use 'sizeof(long)' as
dma alignment is wrong.
Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com>
Signed-off-by: Shile Zhang <shile.zhang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20211015024658.1353987-2-xianting.tian@linux.alibaba.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
Vladimir Oltean
David S. Miller
William Breathitt Gray
Kai Vehmanen
Michael Grzeschik
Michael Tretter
Krzysztof Kozlowski
Uwe Kleine-König
Amelie Delaunay
Yinbo Zhu
Cai Huoqing
Thomas Zimmermann
Jani Nikula
Arnaud Pouliquen
Rafael J. Wysocki
Antoine Tenart
Lee Jones
Yang Yingliang
Dmitry Osipenko
Anitha Chrisanthus
Edmund Dea
Dan Johansen
Marek Vasut
Miquel Raynal
Johan Hovold
Erwan Le Ray
Xianting Tian