aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2021-08-08iio: light: cm3323: Add of_device_id tableSiddharth Manthan1-0/+7
Add an of_device_id table to explicitly support the Capella cm3323 Ambient Light Sensor rather than relying on matching against the i2c_device_id table. Signed-off-by: Siddharth Manthan <siddharth.manthan@gmail.com> Link: https://lore.kernel.org/r/20210728110048.14593-2-siddharth.manthan@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-08iio: chemical: Add driver support for sgp40Andreas Klinger3-0/+390
sgp40 is a gas sensor used for measuring the air quality. This driver is reading the raw resistance value which can be passed to an userspace algorithm for further calculation. The raw value is also used to calculate an estimated absolute voc index in the range from 0 to 500. For this purpose the raw_mean value of the resistance for which the index value is 250 might be set up as a calibration step. This can be done with in_resistance_calibbias. Compensation of relative humidity and temperature is supported and can be used by writing to output values of out_humidityrelative_raw and out_temp_raw. There is a predecesor sensor type (sgp30) already existing. This driver module was not extended because the new sensor is quite different in its i2c telegrams. Signed-off-by: Andreas Klinger <ak@it-klinger.de> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20210804154641.GA3237@arbad Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-08iio: ep93xx: Prepare clock before using itAlexander Sverdlin1-3/+3
Use clk_prepare_enable()/clk_disable_unprepare() in preparation for switch to Common Clock Framework, otherwise the following is visible: WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:1011 clk_core_enable+0x9c/0xbc Enabling unprepared ep93xx-adc CPU: 0 PID: 1 Comm: swapper Not tainted 5.13.0-rc5-... #1 Hardware name: Cirrus Logic EDB9302 Evaluation Board [<c000d5b0>] (unwind_backtrace) from [<c000c590>] (show_stack+0x10/0x18) [<c000c590>] (show_stack) from [<c03a5f38>] (dump_stack+0x20/0x2c) [<c03a5f38>] (dump_stack) from [<c03a2098>] (__warn+0x98/0xc0) [<c03a2098>] (__warn) from [<c03a2150>] (warn_slowpath_fmt+0x90/0xc0) [<c03a2150>] (warn_slowpath_fmt) from [<c01d8358>] (clk_core_enable+0x9c/0xbc) [<c01d8358>] (clk_core_enable) from [<c01d8698>] (clk_core_enable_lock+0x18/0x30) [<c01d8698>] (clk_core_enable_lock) from [<c0266560>] (ep93xx_adc_probe+0xe4/0x1a0) [<c0266560>] (ep93xx_adc_probe) from [<c02126e0>] (platform_probe+0x34/0x80) [<c02126e0>] (platform_probe) from [<c0210bf8>] (really_probe+0xe8/0x394) [<c0210bf8>] (really_probe) from [<c0211464>] (device_driver_attach+0x5c/0x64) [<c0211464>] (device_driver_attach) from [<c02114e8>] (__driver_attach+0x7c/0xec) [<c02114e8>] (__driver_attach) from [<c020f1b4>] (bus_for_each_dev+0x78/0xc4) [<c020f1b4>] (bus_for_each_dev) from [<c0211570>] (driver_attach+0x18/0x24) [<c0211570>] (driver_attach) from [<c020fab4>] (bus_add_driver+0x140/0x1cc) [<c020fab4>] (bus_add_driver) from [<c0211c44>] (driver_register+0x74/0x114) [<c0211c44>] (driver_register) from [<c02134f8>] (__platform_driver_register+0x18/0x24) [<c02134f8>] (__platform_driver_register) from [<c0470148>] (ep93xx_adc_driver_init+0x10/0x1c) [<c0470148>] (ep93xx_adc_driver_init) from [<c045ce88>] (do_one_initcall+0x7c/0x1a4) [<c045ce88>] (do_one_initcall) from [<c045d184>] (kernel_init_freeable+0x17c/0x1fc) [<c045d184>] (kernel_init_freeable) from [<c03a64d0>] (kernel_init+0x8/0xf8) [<c03a64d0>] (kernel_init) from [<c00082d8>] (ret_from_fork+0x14/0x3c) ... ep93xx-adc ep93xx-adc: Cannot enable clock ep93xx-adc: probe of ep93xx-adc failed with error -108 Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Link: https://lore.kernel.org/r/20210613233041.128961-2-alexander.sverdlin@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-08iio: adc: fsl-imx25-gcq: adjust irq check to match docs and simplify codeTang Bin1-6/+3
For the function of platform_get_irq(), the example in platform.c is * int irq = platform_get_irq(pdev, 0); * if (irq < 0) * return irq; the return value of zero is unnecessary to check, so make the right check and simplify code. Note that platform_get_irq() is documented as never returning 0 so this is a minor optmization rather than a fix. Co-developed-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Link: https://lore.kernel.org/r/20210802120929.33760-1-tangbin@cmss.chinamobile.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-08ppp: Fix generating ppp unit id when ifname is not specifiedPali Rohár1-4/+15
When registering new ppp interface via PPPIOCNEWUNIT ioctl then kernel has to choose interface name as this ioctl API does not support specifying it. Kernel in this case register new interface with name "ppp<id>" where <id> is the ppp unit id, which can be obtained via PPPIOCGUNIT ioctl. This applies also in the case when registering new ppp interface via rtnl without supplying IFLA_IFNAME. PPPIOCNEWUNIT ioctl allows to specify own ppp unit id which will kernel assign to ppp interface, in case this ppp id is not already used by other ppp interface. In case user does not specify ppp unit id then kernel choose the first free ppp unit id. This applies also for case when creating ppp interface via rtnl method as it does not provide a way for specifying own ppp unit id. If some network interface (does not have to be ppp) has name "ppp<id>" with this first free ppp id then PPPIOCNEWUNIT ioctl or rtnl call fails. And registering new ppp interface is not possible anymore, until interface which holds conflicting name is renamed. Or when using rtnl method with custom interface name in IFLA_IFNAME. As list of allocated / used ppp unit ids is not possible to retrieve from kernel to userspace, userspace has no idea what happens nor which interface is doing this conflict. So change the algorithm how ppp unit id is generated. And choose the first number which is not neither used as ppp unit id nor in some network interface with pattern "ppp<id>". This issue can be simply reproduced by following pppd call when there is no ppp interface registered and also no interface with name pattern "ppp<id>": pppd ifname ppp1 +ipv6 noip noauth nolock local nodetach pty "pppd +ipv6 noip noauth nolock local nodetach notty" Or by creating the one ppp interface (which gets assigned ppp unit id 0), renaming it to "ppp1" and then trying to create a new ppp interface (which will always fails as next free ppp unit id is 1, but network interface with name "ppp1" exists). This patch fixes above described issue by generating new and new ppp unit id until some non-conflicting id with network interfaces is generated. Signed-off-by: Pali Rohár <pali@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-08ppp: Fix generating ifname when empty IFLA_IFNAME is specifiedPali Rohár1-1/+1
IFLA_IFNAME is nul-term string which means that IFLA_IFNAME buffer can be larger than length of string which contains. Function __rtnl_newlink() generates new own ifname if either IFLA_IFNAME was not specified at all or userspace passed empty nul-term string. It is expected that if userspace does not specify ifname for new ppp netdev then kernel generates one in format "ppp<id>" where id matches to the ppp unit id which can be later obtained by PPPIOCGUNIT ioctl. And it works in this way if IFLA_IFNAME is not specified at all. But it does not work when IFLA_IFNAME is specified with empty string. So fix this logic also for empty IFLA_IFNAME in ppp_nl_newlink() function and correctly generates ifname based on ppp unit identifier if userspace did not provided preferred ifname. Without this patch when IFLA_IFNAME was specified with empty string then kernel created a new ppp interface in format "ppp<id>" but id did not match ppp unit id returned by PPPIOCGUNIT ioctl. In this case id was some number generated by __rtnl_newlink() function. Signed-off-by: Pali Rohár <pali@kernel.org> Fixes: bb8082f69138 ("ppp: build ifname using unit identifier for rtnl based devices") Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-08bnxt_en: Use register window 6 instead of 5 to read the PHCMichael Chan1-2/+2
Some older Broadcom debug tools use window 5 and may conflict, so switch to use window 6 instead. Fixes: 118612d519d8 ("bnxt_en: Add PTP clock APIs, ioctls, and ethtool methods") Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-08bnxt_en: Update firmware call to retrieve TX PTP timestampMichael Chan3-4/+11
New firmware interface requires the PTP sequence ID header offset to be passed to the firmware to properly find the matching timestamp for all protocols. Fixes: 83bb623c968e ("bnxt_en: Transmit and retrieve packet timestamps") Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-08bnxt_en: Update firmware interface to 1.10.2.52Michael Chan1-21/+55
The key change is the firmware call to retrieve the PTP TX timestamp. The header offset for the PTP sequence number field is now added. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-08atm: horizon: Fix spelling mistakes in TX commentJun Miao1-3/+3
It's "must not", not "musn't", meaning "shall not". Let's fix that. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Jun Miao <jun.miao@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-08ptp: Fix possible memory leak caused by invalid castVinicius Costa Gomes1-1/+1
Fixes possible leak of PTP virtual clocks. The number of PTP virtual clocks to be unregistered is passed as 'u32', but the function that unregister the devices handles that as 'u8'. Fixes: 73f37068d540 ("ptp: support ptp physical/virtual clocks conversion") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-08devlink: Simplify devlink port API callsLeon Romanovsky4-16/+12
Devlink port already has pointer to the devlink instance and all API calls that forward these devlink ports to the drivers perform same "devlink_port->devlink" assignment before actual call. This patch removes useless parameter and allows us in the future to create specific devlink_port_ops to manage user space access with reliable ops assignment. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-08net: phy: micrel: Fix link detection on ksz87xx switch"Ben Hutchings1-2/+0
Commit a5e63c7d38d5 "net: phy: micrel: Fix detection of ksz87xx switch" broke link detection on the external ports of the KSZ8795. The previously unused phy_driver structure for these devices specifies config_aneg and read_status functions that appear to be designed for a fixed link and do not work with the embedded PHYs in the KSZ8795. Delete the use of these functions in favour of the generic PHY implementations which were used previously. Fixes: a5e63c7d38d5 ("net: phy: micrel: Fix detection of ksz87xx switch") Signed-off-by: Ben Hutchings <ben.hutchings@mind.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-07drm/msm/dpu: make dpu_hw_ctl_clear_all_blendstages clear necessary LMsDmitry Baryshkov1-4/+6
dpu_hw_ctl_clear_all_blendstages() clears settings for the few first LMs instead of mixers actually used for the CTL. Change it to clear necessary data, using provided mixer ids. Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210704230519.4081467-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-07drm/msm/dpu: add support for alpha blending propertiesDmitry Baryshkov2-16/+37
Add support for alpha blending properties. Setup the plane blend state according to those properties. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210628191958.2754731-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-07drm/msm/dp: update is_connected status base on sink count at dp_pm_resume()Kuogee Hsieh1-3/+14
Currently at dp_pm_resume() is_connected state is decided base on hpd connection status only. This will put is_connected in wrongly "true" state at the scenario that dongle attached to DUT but without hmdi cable connecting to it. Fix this problem by adding read sink count from dongle and decided is_connected state base on both sink count and hpd connection status. Changes in v2: -- remove dp_get_sink_count() cand call drm_dp_read_sink_count() Changes in v3: -- delete status local variable from dp_pm_resume() Changes in v4: -- delete un necessary comment at dp_pm_resume() Fixes: d9aa6571b28ba ("drm/msm/dp: check sink_count before update is_connected status") Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org> Link: https://lore.kernel.org/r/1628092261-32346-1-git-send-email-khsieh@codeaurora.org Tested-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-07drm/msm/disp/dpu1: add safe lut config in dpu driverKalyan Thota1-0/+5
Add safe lut configuration for all the targets in dpu driver as per QOS recommendation. Issue reported on SC7280: With wait-for-safe feature in smmu enabled, RT client buffer levels are checked to be safe before smmu invalidation. Since display was always set to unsafe it was delaying the invalidaiton process thus impacting the performance on NRT clients such as eMMC and NVMe. Validated this change on SC7280, With this change eMMC performance has improved significantly. Changes in v2: - Add fixes tag (Sai) - CC stable kernel (Dimtry) Changes in v3: - Correct fixes tag with appropriate hash (stephen) - Resend patch adding reviewed by tag - Resend patch adding correct format for pushing into stable tree (Greg) Fixes: 591e34a091d1 ("drm/msm/disp/dpu1: add support for display for SC7280 target") Cc: stable@vger.kernel.org Signed-off-by: Kalyan Thota <kalyan_t@codeaurora.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> (sc7280, sc7180) Link: https://lore.kernel.org/r/1628070028-2616-1-git-send-email-kalyan_t@codeaurora.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-07drm/msm/dp: Remove unused variableSouptick Joarder1-2/+0
Kernel test roobot throws below warning -> drivers/gpu/drm/msm/dp/dp_display.c:1017:21: warning: variable 'drm' set but not used [-Wunused-but-set-variable] Removed unused variable drm. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Link: https://lore.kernel.org/r/20210709024834.29680-1-jrdr.linux@gmail.com Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-07drm/msm/dsi: Fix DSI and DSI PHY regulator config from SDM660Konrad Dybcio2-2/+1
VDDA is not present and the specified load value is wrong. Fix it. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210728222057.52641-1-konrad.dybcio@somainline.org Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-07drm/msm: remove a repeated including of <linux/debugfs.h>Guo Zhengkui1-1/+0
Remove a repeated "#include <linux/debugfs.h>" in line 19 of the original file. Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com> Link: https://lore.kernel.org/r/20210729030140.99500-1-guozhengkui@vivo.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-07drm/msm/dp: add logs across DP driver for ease of debuggingMaitreyee Rao5-35/+44
Add trace points across the MSM DP driver to help debug interop issues. Changes in v2: - Got rid of redundant log messages. - Added %#x instead of 0x%x wherever required. - Got rid of __func__ calls in debug messages. - Added newline wherever missing. Changes in v3: - Got rid of redundant log messages. - Unstuck colon from printf specifier in various places. Changes in v4: - Changed goto statement and used if else-if Changes in v5: - Changed if else if statement, to not overwrite the ret variable multiple times. Changes in v6: - Changed a wrong log message. Signed-off-by: Maitreyee Rao <maitreye@codeaurora.org> Link: https://lore.kernel.org/r/1627346298-11528-1-git-send-email-maitreye@codeaurora.org Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-07drm/msm/kms: drop set_encoder_mode callbackDmitry Baryshkov1-3/+0
set_encoder_mode callback is completely unused now. Drop it from msm_kms_func(). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/20210717124016.316020-8-dmitry.baryshkov@linaro.org Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-07drm/msm/dsi: stop calling set_encoder_mode callbackDmitry Baryshkov3-15/+0
None of the display drivers now implement set_encoder_mode callback. Stop calling it from the modeset init code. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/20210717124016.316020-7-dmitry.baryshkov@linaro.org Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-07drm/msm/dp: stop calling set_encoder_mode callbackDmitry Baryshkov1-18/+0
None of the display drivers now implement set_encoder_mode callback. Stop calling it from the modeset init code. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/20210717124016.316020-6-dmitry.baryshkov@linaro.org Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-07drm/msm/mdp5: move mdp5_encoder_set_intf_mode after msm_dsi_modeset_initDmitry Baryshkov1-8/+3
Move a call to mdp5_encoder_set_intf_mode() after msm_dsi_modeset_init(), removing set_encoder_mode callback. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/20210717124016.316020-5-dmitry.baryshkov@linaro.org Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-07drm/msm/dpu: support setting up two independent DSI connectorsDmitry Baryshkov1-45/+57
Move setting up encoders from set_encoder_mode to _dpu_kms_initialize_dsi() / _dpu_kms_initialize_displayport(). This allows us to support not only "single DSI" and "bonded DSI" but also "two independent DSI" configurations. In future this would also help adding support for multiple DP connectors. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/20210717124016.316020-4-dmitry.baryshkov@linaro.org Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-07drm/msm/dsi: add three helper functionsDmitry Baryshkov3-10/+33
Add three helper functions to be used by display drivers for setting up encoders. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/20210717124016.316020-3-dmitry.baryshkov@linaro.org Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-07drm/msm/dsi: rename dual DSI to bonded DSIDmitry Baryshkov8-80/+79
We are preparing to support two independent DSI hosts in the DSI/DPU code. To remove possible confusion (as both configurations can be referenced as dual DSI) let's rename old "dual DSI" (two DSI hosts driving single device, with clocks being locked) to "bonded DSI". Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/20210717124016.316020-2-dmitry.baryshkov@linaro.org Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> [DB: add one extra hunk added by one previous patches] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-07drm/msm/dsi: add support for dsi test pattern generatorAbhinav Kumar3-0/+77
During board bringups its useful to have a DSI test pattern generator to isolate a DPU vs a DSI issue and focus on the relevant hardware block. To facilitate this, add an API which triggers the DSI controller test pattern. The expected output is a rectangular checkered pattern. This has been validated on a single DSI video mode panel by calling it right after drm_panel_enable() which is also the ideal location to use this as the DSI host and the panel have been initialized by then. Further validation on dual DSI and command mode panel is pending. If there are any fix ups needed for those, it shall be applied on top of this change. Changes in v2: - generate the new dsi.xml.h and update the bitfield names Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/1626922232-29105-2-git-send-email-abhinavk@codeaurora.org Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-07drm/msm/dsi: update dsi register header file for tpgAbhinav Kumar1-0/+73
Update the DSI controller header XML file to add registers and bitfields to support rectangular checkered pattern generator. Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/1626922232-29105-1-git-send-email-abhinavk@codeaurora.org Reviewed-by: Stephen Boyd <swboyd@chromium.org> [DB: removed headergen commit changes] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-07drm/msm/dsi: Add DSI support for SC7280Rajeev Nandan2-0/+21
Add support for v2.5.0 DSI block in the SC7280 SoC. Signed-off-by: Rajeev Nandan <rajeevny@codeaurora.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/1624365748-24224-4-git-send-email-rajeevny@codeaurora.org Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-07drm/msm/dsi: Add PHY configuration for SC7280Rajeev Nandan4-3/+32
The SC7280 SoC uses the 7nm (V4.1) DSI PHY driver with different enable|disable regulator loads. Signed-off-by: Rajeev Nandan <rajeevny@codeaurora.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/1624365748-24224-3-git-send-email-rajeevny@codeaurora.org Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-07drm/msm/dsi: drop msm_dsi_phy_get_shared_timingsDmitry Baryshkov3-13/+8
Instead of fetching shared timing through an extra function call, get them directly from msm_dsi_phy_enable. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/20210709210729.953114-9-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-07drm/msm/dsi: phy: use of_device_get_match_dataDmitry Baryshkov1-6/+4
Use of_device_get_match-data() instead of of_match_node(). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/20210709210729.953114-8-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-07drm/msm/dpu: Add newlines to printksStephen Boyd1-7/+5
Add some missing newlines to the various DRM printks in this file. Noticed while looking at logs. While we're here unbreak quoted strings so grepping them is easier. Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20210708065619.999199-1-swboyd@chromium.org Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-07drm/msm: mdp4: drop vblank get/put from prepare/complete_commitDavid Heidelberg1-13/+0
msm_atomic is doing vblank get/put's already, currently there no need to duplicate the effort in MDP4 Fix warning: ... WARNING: CPU: 3 PID: 79 at drivers/gpu/drm/drm_vblank.c:1194 drm_vblank_put+0x1cc/0x1d4 ... and multiple vblank time-outs: ... msm 5100000.mdp: vblank time out, crtc=1 ... Tested on Nexus 7 2013 (deb), LTS 5.10.50. Introduced by: 119ecb7fd3b5 ("drm/msm/mdp4: request vblank during modeset") Signed-off-by: David Heidelberg <david@ixit.cz> Link: https://lore.kernel.org/r/20210715060925.7880-1-david@ixit.cz Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-07drm/msm/mdp4: move HW revision detection to earlier phaseDavid Heidelberg1-23/+22
Fixes if condition, which never worked inside mdp4_kms_init, since HW detection has been done later in mdp4_hw_init. Fixes: eb2b47bb9a03 ("drm/msm/mdp4: only use lut_clk on mdp4.2+") Signed-off-by: David Heidelberg <david@ixit.cz> Link: https://lore.kernel.org/r/20210705231641.315804-2-david@ixit.cz Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-07drm/msm/mdp4: refactor HW revision detection into read_mdp_hw_revisionDavid Heidelberg1-9/+18
Inspired by MDP5 code. Also use DRM_DEV_INFO for MDP version as MDP5 does. Cosmetic change: uint32_t -> u32 - checkpatch suggestion. Signed-off-by: David Heidelberg <david@ixit.cz> Link: https://lore.kernel.org/r/20210705231641.315804-1-david@ixit.cz Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-07drm/msm: Fix error return code in msm_drm_init()Wei Li1-0/+1
When it fail to create crtc_event kthread, it just jump to err_msm_uninit, while the 'ret' is not updated. So assign the return code before that. Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Li <liwei391@huawei.com> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/20210705134302.315813-1-liwei391@huawei.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-07drm/msm/dsi: drop gdsc regulator handlingDmitry Baryshkov2-27/+7
None of supported devies uses "gdsc" regulator for DSI. GDSC support is now implemented as a power domain. Drop old code and config handling gdsc regulator requesting and enabling. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210701000015.3347713-1-dmitry.baryshkov@linaro.org Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-07drm/msm/dsi: support CPHY mode for 7nm pll/phyJonathan Marek4-46/+183
Add the required changes to support 7nm pll/phy in CPHY mode. This adds a "qcom,dsi-phy-cphy-mode" property for the PHY node to enable the CPHY mode. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210617144349.28448-4-jonathan@marek.ca Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-07drm/msm: Use list_move_tail instead of list_del/list_add_tail in msm_gem.cBaokun Li1-2/+1
Using list_move_tail() instead of list_del() + list_add_tail() in msm_gem.c. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Baokun Li <libaokun1@huawei.com> Link: https://lore.kernel.org/r/20210609072838.1369371-1-libaokun1@huawei.com Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-07drm/msm: Use nvmem_cell_read_variable_le_u32() to read speed binDouglas Anderson1-3/+2
Let's use the newly-added nvmem_cell_read_variable_le_u32() to future proof ourselves a little bit. Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20210521134516.v2.1.Id496c6fea0cb92ff6ea8ef1faf5d468eb09465e3@changeid Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-07drm/msm: Periodically update RPTR shadowRob Clark2-11/+45
On a5xx and a6xx devices that are using CP_WHERE_AM_I to update a ringbuffer read-ptr shadow value, periodically emit a CP_WHERE_AM_I every 32 commands, so that a later submit waiting for ringbuffer space to become available sees partial progress, rather than not seeing rptr advance at all until the GPU gets to the end of the submit that it is currently chewing on. Signed-off-by: Rob Clark <robdclark@chromium.org> Acked-by: Jordan Crouse <jordan@cosmicpenguin.net> Link: https://lore.kernel.org/r/20210428193654.1498482-3-robdclark@gmail.com Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-07drm/msm: Implement mmap as GEM object functionThomas Zimmermann6-62/+16
Moving the driver-specific mmap code into a GEM object function allows for using DRM helpers for various mmap callbacks. The respective msm functions are being removed. The file_operations structure fops is now being created by the helper macro DEFINE_DRM_GEM_FOPS(). v2: * rebase onto latest upstream * remove declaration of msm_gem_mmap_obj() from msm_fbdev.c Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20210706084753.8194-1-tzimmermann@suse.de [squash in missing VM_DONTEXPAND flag] Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-07Merge tag 'block-5.14-2021-08-07' of git://git.kernel.dk/linux-blockLinus Torvalds4-7/+14
Pull block fixes from Jens Axboe: "A few minor fixes: - Fix ldm kernel-doc warning (Bart) - Fix adding offset twice for DMA address in n64cart (Christoph) - Fix use-after-free in dasd path handling (Stefan) - Order kyber insert trace correctly (Vincent) - raid1 errored write handling fix (Wei) - Fix blk-iolatency queue get failure handling (Yu)" * tag 'block-5.14-2021-08-07' of git://git.kernel.dk/linux-block: kyber: make trace_block_rq call consistent with documentation block/partitions/ldm.c: Fix a kernel-doc warning blk-iolatency: error out if blk_get_queue() failed in iolatency_set_limit() n64cart: fix the dma address in n64cart_do_bvec s390/dasd: fix use after free in dasd path handling md/raid10: properly indicate failure when ending a failed write request
2021-08-07drm: msm: Add 680 gpu to the adreno gpu listBjorn Andersson5-8/+32
This patch adds a Adreno 680 entry to the gpulist. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210725032002.3961691-1-bjorn.andersson@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-07net: bonding: bond_alb: Remove the dependency on ipx network layerCai Huoqing1-32/+0
commit <47595e32869f> ("<MAINTAINERS: Mark some staging directories>") indicated the ipx network layer as obsolete in Jan 2018, updated in the MAINTAINERS file now, after being exposed for 3 years to refactoring, so to delete the ipx net layer related code for good. Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-07net: ethernet: stmmac: Do not use unreachable() in ipq806x_gmac_probe()Nathan Chancellor1-10/+8
When compiling with clang in certain configurations, an objtool warning appears: drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.o: warning: objtool: ipq806x_gmac_probe() falls through to next function phy_modes() This happens because the unreachable annotation in the third switch statement is not eliminated. The compiler should know that the first default case would prevent the second and third from being reached as the comment notes but sanitizer options can make it harder for the compiler to reason this out. Help the compiler out by eliminating the unreachable() annotation and unifying the default case error handling so that there is no objtool warning, the meaning of the code stays the same, and there is less duplication. Reported-by: Sami Tolvanen <samitolvanen@google.com> Tested-by: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-07s390/qeth: Update MACs of LEARNING_SYNC deviceAlexandra Winter1-4/+127
Update the MAC addresses that are registered with a LEARNING_SYNC qeth device with the events announced by the attached software bridge. Typically the LEARNING_SYNC qeth bridge port has an isolated sibling (the default interface of an 'HiperSockets Converged Interface' (HSCI)). Update the MACs of isolated siblings as well, to avoid unnecessary flooding in the attached virtualized switches. Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.