| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
DG2 has Xe_LPD display (version 13) and Xe_HPG (version 12.55) graphics.
There are two variants (treated as subplatforms in the code): DG2-G10
and DG2-G11 that require independent programming in some areas (e.g.,
workarounds).
Bspec: 44472, 44474, 46197, 48028, 48077
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721223043.834562-4-matthew.d.roper@intel.com
|
|
XeHP SDV is a Intel® dGPU without display. This is just the definition
of some basic platform macros, by large a copy of current state of
Tigerlake which does not reflect the end state of this platform.
v2:
- Switch to intel_step infrastructure for stepping matches. (Jani)
v3:
- Bring earlier in patch series and leave addition of new media engines
to the engine mask for a later patch.
Bspec: 44467, 48077
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721223043.834562-3-matthew.d.roper@intel.com
|
|
Our _FEATURES macro went back to GEN7, extending each other, making it
difficult to grasp what was really enabled/disabled. Take the
opportunity of the GEN -> XE_HP name break and also break with the
feature inheritance.
For XE_HP this basically goes from GEN12 back to GEN7 coalescing the
features making sure the overrides remain, remove all the
display-specific features and sort it.
Then also remove the definitions that would be overridden by
DGFX_FEATURES and those that were 0 (since that is the default).
Exception here is has_master_unit_irq: although it is a feature that
started with DG1 and is true for all DGFX platforms, it's also true for
XE_HP in general.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721223043.834562-2-matthew.d.roper@intel.com
|
|
Besides the arch version returned by GRAPHICS_VER(), new platforms
contain a "release id" to make clear the difference from one platform to
another.
The release id number is not formally defined by hardware until future
platforms that will expose it via a new GMD_ID register. For the
platforms we support before that register becomes available we will set
the values in software and we can set them as we please. So the plan is
to set them so we can group different features under a single
GRAPHICS_VER_FULL() check.
After GMD_ID is used, the usefulness of a "full version check" will be
greatly reduced and will be mostly used for deciding workarounds and a
few code paths. So it makes sense to keep it as a separate field from
graphics_ver. Also, as a platform with `release == n` may be closer
feature-wise to `n - 2` than to `n - 1`, use the word "release" rather
than the more common "minor" for this
This is a mix of 2 independent changes: one by me and the other by Matt
Roper.
v2:
- Reword commit message to make it clearer why we don't call it
"minor" (Matt Roper and Tvrtko)
- Rename variables s/*_ver_release/*_rel/ and print them in a single
line formatted as {ver}.{rel:2} (Jani and Matt Roper)
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210707235921.2416911-2-lucas.demarchi@intel.com
(cherry picked from commit ca6374e267e2735fe382fe95de2a8a9c30c6bdb3)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
Brevity is not needed here, so just spell out "* version" in the string.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210707235921.2416911-1-lucas.demarchi@intel.com
(cherry picked from commit 0f9b145a0a0ab0d3d4143c20e2ca347d8a105e33)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
Commit 3ce6c9e2617e ("spi: add of_device_uevent_modalias support") is
incomplete, as it didn't update the modalias_show function to generate the
of: modalias string if available.
Fixes: 3ce6c9e2617e ("spi: add of_device_uevent_modalias support")
Signed-off-by: Andreas Schwab <schwab@suse.de>
Link: https://lore.kernel.org/r/mvmwnpi4fya.fsf@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In meson_spicc_probe, the error handling code needs to clean up master
by calling spi_master_put, but the remove function does not have this
function call. This will lead to memory leak of spicc->master.
Reported-by: Dongliang Mu <mudongliangabcd@gmail.com>
Fixes: 454fa271bc4e("spi: Add Meson SPICC driver")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Link: https://lore.kernel.org/r/20210720100116.1438974-1-mudongliangabcd@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The cursor plane should use the current plane state in atomic_async_update
because it would not be the new plane state in the global atomic state
since _swap_state happened when those hook are run.
Fix cursor plane issue by below modification:
1. Remove plane_helper_funcs->atomic_update(plane, state) in
mtk_drm_crtc_async_update.
2. Add mtk_drm_update_new_state in to mtk_plane_atomic_async_update to
update the cursor plane by current plane state hook and update
others plane by the new_state.
Fixes: 37418bf14c13 ("drm: Use state helper instead of the plane state pointer")
Signed-off-by: jason-jh.lin <jason-jh.lin@mediatek.com>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
atomic_get_output_bus_fmts() is only called when the bridge is the last
element in the bridge chain.
If mtk-dpi is not the last bridge, the format of output_bus_cfg is
MEDIA_BUS_FMT_FIXED, and mtk_dpi_dual_edge() will fail to write correct
value to regs.
Fixes: ec8747c52434 ("drm/mediatek: dpi: Add bus format negotiation")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
kernel-doc complains about a non-kernel-doc comment that uses "/**"
to begin the comment, so change it to just "/*".
drivers/bluetooth/btrsi.c:2: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Copyright (c) 2017 Redpine Signals Inc.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Aditya Srivastava <yashsri421@gmail.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Cc: linux-bluetooth@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org
Cc: Prameela Rani Garnepudi <prameela.j04cs@gmail.com>
Cc: Sanjay Kumar Konduri <sanjay.konduri@redpinesignals.com>
Cc: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Call to sdw_update_slave_status() needs to be added to sdw_clear_slave_
status() to ensure Slaves are informed of the new status via update_
status() callback.
This will enable codec drivers to reset their internal states and make
sure the register settings are properly restored on pm_runtime or
system resume
BugLink: https://github.com/thesofproject/linux/issues/2908
BugLink: https://github.com/thesofproject/linux/issues/2637
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20210714033609.11963-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
RTL8852 support MSFT HCI extension, therefore set the proper MSFT
opcode.
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Reviewed-by: Hilda Wu <hildawu@realtek.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
The LG LGSBWAC92/TWCM-K505D/EAT64454801/EAT64454802 (it goes by many
names) is a combo WiFi/Bluetooth module that's used in several models of
LG TVs. It uses the MediaTek MT7668AUN, which is already supported in
btusb, but this device has a non-MediaTek VID:PID pair so to get it to
work we just need to add it to the list of devices to probe.
Device from /sys/kernel/debug/usb/devices:
T: Bus=09 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=043e ProdID=3109 Rev= 1.00
S: Manufacturer=MediaTek Inc.
S: Product=Wireless_Device
S: SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=100mA
A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 8 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Forest Crossman <cyrozap@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
The ret is not used in the interrupt handler, it is just returned without
any condition or change.
We can return the IRQ_HANDLED directly.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20210714015555.17685-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
We've added quite a few filters to avoid throwing errors if a Device
does not respond to commands during the clock stop sequences, but we
missed one.
This will lead to an isolated message
[ 6115.294412] soundwire sdw-master-1: SDW_SCP_STAT bread failed:-61
The callers already filter this error code, so there's no point in
keeping it at the lower level.
Since this is a recoverable error, make this dev_err() conditional and
only log cases with Command Failed.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20210714014209.17357-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
When reading the support debug features failed, there are not available
features init. Continue to set the debug features is illogical, we should
skip btintel_set_debug_features(), even if check it by "if (!features)".
Fixes: c453b10c2b28 ("Bluetooth: btusb: Configure Intel debug feature based on available support")
Signed-off-by: Jun Miao <jun.miao@windriver.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Sparse throws the following type of warnings:
drivers/soundwire/dmi-quirks.c:25:17: error: constant
0x000010025D070100 is so big it is long
Let's add the 'ull' suffix to make this go away and find real issues.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20210714013027.17022-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
This add supports for IMC Networks Wireless_Device Media Chip
which contains the MT7921 chipset.
$ lsusb
Bus 001 Device 004: ID 13d3:3563 IMC Networks Wireless_Device
$ cat /sys/kernel/debug/usb/devices
T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=03 Dev#= 4 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3563 Rev= 1.00
S: Manufacturer=MediaTek Inc.
S: Product=Wireless_Device
S: SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us
I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us
Signed-off-by: Wai Paulo Valerio Wang <waicool20@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
The hci_suspend_notifier which was introduced last year, is causing
problems for uart attached btrtl devices. These devices may loose their
firmware and their baudrate setting over a suspend/resume.
Since we don't even know the baudrate after a suspend/resume recovering
from this is tricky. The driver solves this by treating these devices
the same as USB BT HCIs which drop of the bus during suspend.
Specifically the driver:
1. Simply unconditionally turns the device fully off during
system-suspend to save maximum power.
2. Calls device_reprobe() from a workqueue to fully re-init the device
from scratch on system-resume (unregistering the old HCI and
registering a new HCI).
This means that these devices do not benefit from the suspend / resume
handling work done by the hci_suspend_notifier. At best this unnecessarily
adds some time to the suspend/resume time.
But in practice this is actually causing problems:
1. These btrtl devices seem to not like the HCI_OP_WRITE_SCAN_ENABLE(
SCAN_DISABLED) request being send to them when entering the
BT_SUSPEND_CONFIGURE_WAKE state. The same request send on
BT_SUSPEND_DISCONNECT works fine, but the second one send (unnecessarily?)
from the BT_SUSPEND_CONFIGURE_WAKE transition causes the device to hang:
[ 573.497754] PM: suspend entry (s2idle)
[ 573.554615] Filesystems sync: 0.056 seconds
[ 575.837753] Bluetooth: hci0: Timed out waiting for suspend events
[ 575.837801] Bluetooth: hci0: Suspend timeout bit: 4
[ 575.837925] Bluetooth: hci0: Suspend notifier action (3) failed: -110
2. The PM_POST_SUSPEND / BT_RUNNING transition races with the
driver-unbinding done by the device_reprobe() work.
If the hci_suspend_notifier wins the race it is talking to a dead
device leading to the following errors being logged:
[ 598.686060] Bluetooth: hci0: Timed out waiting for suspend events
[ 598.686124] Bluetooth: hci0: Suspend timeout bit: 5
[ 598.686237] Bluetooth: hci0: Suspend notifier action (4) failed: -110
In both cases things still work, but the suspend-notifier is causing
these ugly errors getting logged and ut increase both the suspend- and
the resume-time by 2 seconds.
This commit avoids these problems by disabling the hci_suspend_notifier.
Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cc: Vasily Khoruzhick <anarsoul@gmail.com>
Cc: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Any interraction with the buffer pool (seeding a buffer, acquire one) is
made through a software portal (SWP, a DPIO object).
There are circumstances where the dpaa2-switch driver probes on a DPSW
before any DPIO devices have been probed. In this case, seeding of the
buffer pool will lead to a panic since no SWPs are initialized.
To fix this, seed the buffer pool after making sure that the software
portals have been probed and are ready to be used.
Fixes: 0b1b71370458 ("staging: dpaa2-switch: handle Rx path on control interface")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The return type of the function is bool and while NULL do evaluate to
false it's not very nice, fix this by explicitly returning false. There
is no functional change.
Signed-off-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Misplaced braces makes it difficult to follow the code easily. This also
goes against the code style guidelines. This resolved following checkpatch
complaints:
ERROR: open brace '{' following function definitions go on the next line
ERROR: that open brace { should be on the previous line
Link: https://lore.kernel.org/linux-media/YIwk3KbVGRPJwKa4@dU2104
[mchehab: dropped a hunk with a merge conflict]
Cc: linux-media@vger.kernel.org, devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org, drv@mailo.com # X-LSpam-Score: -7.3 (-------)
Signed-off-by: Deepak R Varma <drv@mailo.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Remove a superfluous clause in mt9m114_s_power()
Link: https://lore.kernel.org/linux-media/20210719055216.28508-1-vrzh@vrzh.net
Signed-off-by: Martiros Shakhzadyan <vrzh@vrzh.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Move MIPI_PORT_LANES to the only user of it, i.e. pci/runtime/isys/src/rx.c.
Link: https://lore.kernel.org/linux-media/20210713152523.19902-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
There is no need to memset() both dvs_grid_info and dvs_stat_grid_info
separately: they are part of the same union. Instead, just zero the
union itself. This additionally avoids a false positive (due to a
gcc optimization bug[1]) when building with the coming FORTIFY_SOURCE
improvements:
In function 'fortify_memset_chk',
inlined from 'sh_css_pipe_get_grid_info' at drivers/staging/media/atomisp/pci/sh_css.c:5186:3,
inlined from 'ia_css_stream_create' at drivers/staging/media/atomisp/pci/sh_css.c:9442:10:
./include/linux/fortify-string.h:199:4: warning: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning]
199 | __write_overflow_field();
| ^~~~~~~~~~~~~~~~~~~~~~~~
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101419
Link: https://lore.kernel.org/linux-media/20210711145101.1434065-1-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
If init_atomisp_wdts() fails, atomisp_pci_probe() need return
error code.
Link: https://lore.kernel.org/linux-media/20210617072329.1233662-1-yangyingliang@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Removed an unnecessary (void *) cast for an argument passed to kfree().
Link: https://lore.kernel.org/linux-media/20210605020855.1065-3-fmdefrancesco@gmail.com
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Removed checks for pointers != NULL before freeing memory. If kvfree()
and kfree() are given NULL pointers no operations are performed, so
there is no need for the above-mentioned checks. Coccinelle detected the
second of the two unnecessary checks.
Link: https://lore.kernel.org/linux-media/20210527193922.25225-1-fmdefrancesco@gmail.com
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Remove unused port_enabled variable in ia_css_isys_rx_configure().
Link: https://lore.kernel.org/linux-media/20210526124322.48915-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
There are definitions in the header that are not used by all modules inside
the driver. Annotate them with __maybe_unused to avoid compiler warnings.
Link: https://lore.kernel.org/linux-media/20210526124322.48915-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
There is a few static declarations that are not used anywhere, remove them.
Link: https://lore.kernel.org/linux-media/20210526124322.48915-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Function 'ia_css_mmu_invalidate_cache' is declared twice, remove the
repeated declaration.
Link: https://lore.kernel.org/linux-media/1621922559-1859-1-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Static analysis reports this representative problem
atomisp-gc2235.c:867:20: warning: The right operand
of '|' is a garbage value
id = ((high << 8) | low);
^ ~~~
When gc2235_read_reg() fails, its return val is never written.
For gc2235_detect(), high and low are or-ed and compared
with GC2235_ID, 0x2235. Initialize both to 0 and skip
checking the read returns, it's errors are not passed up, only
-ENODEV is.
Link: https://lore.kernel.org/linux-media/20210521194805.2078135-1-trix@redhat.com
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
This patch fixes whitespace at the beginning of line by wrapping after
the type name and aligning the arguments with the open parenthesis.
Identified by checkpatch: WARNING: please, no spaces at the start of a
line.
Link: https://lore.kernel.org/linux-media/20210524173609.672153-1-aniketmail669@gmail.com
Signed-off-by: Aniket Bhattacharyea <aniketmail669@gmail.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Fixing the following checkpatch warning:
WARNING: Block comments should align the * on each line
Link: https://lore.kernel.org/linux-media/20210518112938.88240-1-wanjiabing@vivo.com
Signed-off-by: Jiabing Wan <kael_w@yeah.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
sysfs_emit() is preferred over raw sprintf() for sysfs attributes since it
knows about the sysfs buffer specifics and has some built-in sanity checks.
Link: https://lore.kernel.org/linux-media/20210513034650.252993-1-phind.uet@gmail.com
Signed-off-by: Nguyen Dinh Phi <phind.uet@gmail.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Fix logical continuation style issue and adjacent line splits.
Link: https://lore.kernel.org/linux-media/20210508235622.300394-5-vrzh@vrzh.net
Signed-off-by: Martiros Shakhzadyan <vrzh@vrzh.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Use kcalloc instead of kzalloc with multiplication.
Link: https://lore.kernel.org/linux-media/20210508235622.300394-4-vrzh@vrzh.net
Signed-off-by: Martiros Shakhzadyan <vrzh@vrzh.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Remove unnecessary parenthesis.
Link: https://lore.kernel.org/linux-media/20210508235622.300394-3-vrzh@vrzh.net
Signed-off-by: Martiros Shakhzadyan <vrzh@vrzh.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Change the goto label to lower case.
Remove a space in the goto label.
Link: https://lore.kernel.org/linux-media/20210508235622.300394-2-vrzh@vrzh.net
Signed-off-by: Martiros Shakhzadyan <vrzh@vrzh.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Inside function mt9m114_detect(), variable "retvalue" could
be uninitialized if mt9m114_read_reg() returns error, however, it
is used in the later if statement, which is potentially unsafe.
The local variable "retvalue" is renamed to "model" to avoid
confusion.
Link: https://lore.kernel.org/linux-media/20210625053858.3862-1-yzhai003@ucr.edu
Fixes: ad85094 (media / atomisp: fix the uninitialized use of model ID)
Signed-off-by: Yizhuo <yzhai003@ucr.edu>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Using list_splice_init() instead of entire while-loops
in atomisp_compat_css20.c.
Link: https://lore.kernel.org/linux-media/20210617140926.887680-1-libaokun1@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Returns are not useful at the end of void functions,
they can simply be removed.
Link: https://lore.kernel.org/linux-media/23a6984ddfb15ba38f6983381bb6fdaef3edd7d8.1620479607.git.paskripkin@gmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Removed dublicate returns and breaks inside switch
statements and useless return after switch.
Link: https://lore.kernel.org/linux-media/3944cd10bb5a64157781b1e0ef044c62c05f07c7.1620479607.git.paskripkin@gmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Breaks are not useful after a return, they can
simply be removed.
Link: https://lore.kernel.org/linux-media/4b4a6ad1bc8fc1fd6aafc3e6cd7a4969890340c1.1620479607.git.paskripkin@gmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Fixed a coding style issue.
Link: https://lore.kernel.org/linux-media/20210411134840.7184-1-dev.dragon@bk.ru
Signed-off-by: Dmitrii Wolf <dev.dragon@bk.ru>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
When hmm_pool_register() fails, a pairing PM usage counter
increment is needed to keep the counter balanced. It's the
same for the following error paths.
Link: https://lore.kernel.org/linux-media/20210408081850.24278-1-dinghao.liu@zju.edu.cn
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
s/miror/mirror/
Link: https://lore.kernel.org/linux-media/20210324135642.30054-1-unixbhaskar@gmail.com
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Trivial fix.
Link: https://lore.kernel.org/linux-media/20210318202223.164873-2-ribalda@chromium.org
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The frame memory control register value is currently determined
before userspace selects the final capture format and never corrected.
Update ctx->frame_mem_ctrl in __coda_start_decoding() to fix decoding
into YUV420 or YVU420 capture buffers.
Reported-by: Andrej Picej <andrej.picej@norik.com>
Fixes: 497e6b8559a6 ("media: coda: add sequence initialization work")
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
Matt Roper
Lucas De Marchi
Andreas Schwab
Dongliang Mu
jason-jh.lin
Hsin-Yi Wang
Randy Dunlap
Bard Liao
Archie Pusaka
Forest Crossman
Peter Ujfalusi
Pierre-Louis Bossart
Jun Miao
Wai Paulo Valerio Wang
Hans de Goede
Ioana Ciornei
Niklas Söderlund
Deepak R Varma
Martiros Shakhzadyan
Andy Shevchenko
Kees Cook
Yang Yingliang
Fabio M. De Francesco
Shaokun Zhang
Tom Rix
Aniket Bhattacharyea
Jiabing Wan
Nguyen Dinh Phi
Yizhuo
Baokun Li
Pavel Skripkin
Dmitrii Wolf
Dinghao Liu
Bhaskar Chowdhury
Ricardo Ribalda
Philipp Zabel