aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2021-06-23tpm_tis: Use DEFINE_RES_MEM() to simplify codeZhen Lei1-5/+1
Use DEFINE_RES_MEM() to save a couple of lines of code, which is simpler and more readable. The start address does not need to appear twice. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2021-06-23tpm: fix some doc warnings in tpm1-cmd.cYang Yingliang1-2/+2
Fix the following make W=1 warnings: drivers/char/tpm/tpm1-cmd.c:325: warning: expecting prototype for tpm_startup(). Prototype was for tpm1_startup() instead drivers/char/tpm/tpm1-cmd.c:621: warning: expecting prototype for tpm_continue_selftest(). Prototype was for tpm1_continue_selftest() instead Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2021-06-23tpm_tis_spi: add missing SPI device ID entriesJavier Martinez Canillas1-0/+2
The SPI core always reports a "MODALIAS=spi:<foo>", even if the device was registered via OF. This means that this module won't auto-load if a DT has for example has a node with a compatible "infineon,slb9670" string. In that case kmod will expect a "MODALIAS=of:N*T*Cinfineon,slb9670" uevent but instead will get a "MODALIAS=spi:slb9670", which is not present in the kernel module aliases: $ modinfo drivers/char/tpm/tpm_tis_spi.ko | grep alias alias: of:N*T*Cgoogle,cr50C* alias: of:N*T*Cgoogle,cr50 alias: of:N*T*Ctcg,tpm_tis-spiC* alias: of:N*T*Ctcg,tpm_tis-spi alias: of:N*T*Cinfineon,slb9670C* alias: of:N*T*Cinfineon,slb9670 alias: of:N*T*Cst,st33htpm-spiC* alias: of:N*T*Cst,st33htpm-spi alias: spi:cr50 alias: spi:tpm_tis_spi alias: acpi*:SMO0768:* To workaround this issue, add in the SPI device ID table all the entries that are present in the OF device ID table. Reported-by: Alexander Wellbrock <a.wellbrock@mailbox.org> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Tested-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2021-06-23tpm: add longer timeout for TPM2_CC_VERIFY_SIGNATUREAmir Mizinski1-1/+1
While running a TPM2_CC_VERIFY_SIGNATURE operation with RSA 3072-bit keys the TPM driver fails with the following error: "kernel: [ 2416.187522] tpm tpm0: Operation Timed out" Since the TPM PC Client specification does not specify a number for verify signature operation timeout, and the duration of TPM2_CC_VERIFY_SIGNATURE with RSA 3072-bit keys exceeds the current timeout of TPM_LONG (2 seconds), it is preferable to pick the longest timeout possible. Therefore, set the duration for TPM2_CC_VERIFY_SIGNATUE to TPM_LONG_LONG (5 minutes). [jarkko@kernel.org: mangled the short summary a bit] Link: https://trustedcomputinggroup.org/resource/pc-client-specific-platform-firmware-profile-specification/ Signed-off-by: Amir Mizinski <amirmizi6@gmail.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2021-06-23char: tpm: move to use request_irq by IRQF_NO_AUTOEN flagTian Tao1-2/+2
disable_irq() after request_irq() still has a time gap in which interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will disable IRQ auto-enable because of requesting. Link: https://lore.kernel.org/patchwork/patch/1388765/ Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2021-06-23tpm_tis_spi: set default probe function if device id not matchLiguang Zhang1-4/+8
In DSDT table, TPM _CID was SMO0768, and no _HID definition. After a kernel upgrade from 4.19 to 5.10, TPM probe function was changed which causes device probe fails. In order to make newer kernel to be compatible with the older acpi definition, it would be best set default probe function. Signed-off-by: Liguang Zhang <zhangliguang@linux.alibaba.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2021-06-23tpm_crb: Use IOMEM_ERR_PTR when function returns iomemTian Tao1-1/+1
This is to simplify the code, and IOMEM_ERR_PTR(err) is same with (__force void __iomem *)ERR_PTR(err). Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2021-06-23drm/i915: Deduplicate icl DP HBR2 vs. eDP HBR3 tableVille Syrjälä1-29/+10
The icl combo phy DP HBR2 is identical to the eDP HBR3 table. Get rid of one redundant copy. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210608073603.2408-14-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2021-06-23drm/i915: Fix dg1 buf trans tablesVille Syrjälä1-6/+49
For some reason the dg1 buf trans tables have been stuffed into icl_get_combo_buf_trans_edp() which doesn't even get called on dg1. Split them out into a proper dg1 specific function, and also make sure we use the proper buf trans tables for DP as well as eDP. v2: Add the hobl stuff Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210608073603.2408-13-ville.syrjala@linux.intel.com
2021-06-23drm/i915: Introduce rkl_get_combo_buf_trans()Ville Syrjälä1-11/+51
Give RKL its own get_buf_trans() func. v2: Drop the FIXME since the spec was clarified to indicate that TGL values are used for the HDMI/eDP cases. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210608073603.2408-12-ville.syrjala@linux.intel.com
2021-06-23drm/vc4: hdmi: Register HDMI codecMaxime Ripard3-167/+79
The hdmi-codec brings a lot of advanced features, including the HDMI channel mapping. Let's use it in our driver instead of our own codec. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210525132354.297468-11-maxime@cerno.tech
2021-06-23drm/vc4: hdmi: Remove firmware logic for MAI threshold settingDom Cobley1-16/+6
This was a workaround for bugs in hardware on earlier Pi models and wasn't totally successful. It makes audio quality worse on a Pi4 at the higher sample rates Signed-off-by: Dom Cobley <popcornmix@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210525132354.297468-10-maxime@cerno.tech
2021-06-23drm/vc4: hdmi: Set VC4_HDMI_MAI_CONFIG_FORMAT_REVERSEDom Cobley1-0/+1
Without this bit set, HDMI_MAI_FORMAT doesn't pick up the format and samplerate from DVP_CFG_MAI0_FMT and you can't get HDMI_HDMI_13_AUDIO_STATUS_1 to indicate HBR mode Signed-off-by: Dom Cobley <popcornmix@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210525132354.297468-9-maxime@cerno.tech
2021-06-23drm/vc4: hdmi: Set HDMI_MAI_FMTDom Cobley2-0/+78
The hardware uses this for generating the right audio data island packets when using formats other than PCM Signed-off-by: Dom Cobley <popcornmix@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210525132354.297468-8-maxime@cerno.tech
2021-06-23drm/vc4: hdmi: Set HD_CTL_WHOLSMP and HD_CTL_CHALIGN_SETDom Cobley1-1/+3
Symptom is random switching of speakers when using multichannel. Repeatedly running speakertest -c8 occasionally starts with channels jumbled. This is fixed with HD_CTL_WHOLSMP. The other bit looks beneficial and apears harmless in testing so I'd suggest adding it too. Documentation says: HD_CTL_WHILSMP_SET Wait for whole sample. When this bit is set MAI transmit will start only when there is at least one whole sample available in the fifo. Documentation says: HD_CTL_CHALIGN_SET Channel Align When Overflow. This bit is used to realign the audio channels in case of an overflow. If this bit is set, after the detection of an overflow, equal amount of dummy words to the missing words will be written to fifo, filling up the broken sample and maintaining alignment. Signed-off-by: Dom Cobley <popcornmix@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210525132354.297468-7-maxime@cerno.tech
2021-06-23drm/i915: Clean up hsw/bdw/skl/kbl buf trans funcsVille Syrjälä1-187/+115
Split the hsw/bdw/skl/kbl get_buf_trans() functions into clean platform specific variants. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210608073603.2408-11-ville.syrjala@linux.intel.com
2021-06-23drm/i915: Introduce encoder->get_buf_trans()Ville Syrjälä6-125/+65
Convert the get_buf_trans() functions into an encoder vfunc. Allows us to get rid of bunch of platform if-ladders. v2: Handle adl-p Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210608073603.2408-10-ville.syrjala@linux.intel.com
2021-06-23drm/i915: Store the HDMI default entry in the bug trans structVille Syrjälä2-23/+27
Store the default HDMI buf trans entry in struct intel_ddi_buf_trans so that it's next to the actual table. This let's us start ridding ourselves of some platofrm specifics in intel_ddi_hdmi_num_entries(). Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210608073603.2408-9-ville.syrjala@linux.intel.com
2021-06-23drm/i915; Return the whole buf_trans struct from get_buf_trans()Ville Syrjälä3-98/+98
Raise the abstraction level of the get_buf_trans() functions a bit more by returning the whole wrapper intel_ddi_buf_trans struct. v2: Handle adl-p Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210608073603.2408-8-ville.syrjala@linux.intel.com
2021-06-23drm/i915: Introduce intel_get_buf_trans()Ville Syrjälä1-124/+129
Add a small helper to get the buf trans entris+num_entries from the struct. Should avoid copy-paste errors in the platform specific get_buf_trans() functions. @@ identifier T, N; @@ - *N = T.num_entries; - return T.entries; + return intel_get_buf_trans(&T, N); @@ @@ is_hobl_buf_trans(...) { ... } + + static const union intel_ddi_buf_trans_entry * + intel_get_buf_trans(const struct intel_ddi_buf_trans *ddi_translations, int *num_entries) + { + *num_entries = ddi_translations->num_entries; + return ddi_translations->entries; + } v2: Handle adl-p Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210608073603.2408-7-ville.syrjala@linux.intel.com
2021-06-23drm/i915: Wrap the buf trans tables into a structVille Syrjälä2-178/+448
Put a wrapper struct around the buf trans tables so that we can declare the number of entries and default HDMI entry alongside the table. @wrap@ identifier old =~ "^.*translations.*"; fresh identifier new = "_" ## old; type T; @@ <... static const T - old + new [] = { ... }; + + static const struct intel_ddi_buf_trans old = { + .entries = new, + .num_entries = ARRAY_SIZE(new), + }; ...> @@ identifier wrap.old; @@ ( - ARRAY_SIZE(old) + old.num_entries | - old + old.entries ) @@ @@ union intel_ddi_buf_trans_entry { ... }; + +struct intel_ddi_buf_trans { + const union intel_ddi_buf_trans_entry *entries; + u8 num_entries; +}; v2: Handle adl-p Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210608073603.2408-6-ville.syrjala@linux.intel.com
2021-06-23drm/i915: Rename dkl phy buf trans tablesVille Syrjälä1-16/+16
Rename the dkl phy buf trans tables to follow the same naming pattern used by everyone else. v2: Handle adl-p Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210608073603.2408-5-ville.syrjala@linux.intel.com
2021-06-23drm/i915: Wrap the platform specific buf trans structs into a unionVille Syrjälä3-700/+708
In order to abstact the buf trans stuff let's wrap the platform specific structs into a union. v2: Handle adl-p Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210608073603.2408-4-ville.syrjala@linux.intel.com
2021-06-23drm/i915: Introduce hsw_get_buf_trans()Ville Syrjälä4-39/+43
All the other platforms handle the output_type stuff in their *_get_buf_trans() functions. Do the same for hsw/bdw/skl. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210608073603.2408-3-ville.syrjala@linux.intel.com
2021-06-23drm/i915: s/intel/hsw/ for hsw/bdw/skl buf transVille Syrjälä5-76/+70
Give the hsw/bdw/skl buf trans stuff a better namespace. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210608073603.2408-2-ville.syrjala@linux.intel.com
2021-06-23Merge tag 'extcon-next-for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-nextGreg Kroah-Hartman5-48/+258
Chanwoo writes: Update extcon next for v5.14 Detailed description for this pull request: 1. Update extcon-sm5502 provider driver - Convert devicetree binding document sytle with yaml for extcon-sm5502.c and add support for SM5504 chip to extcon-sm5502.c. - Use devm_regmap_add_irq_chip and probe_new for extcon-sm5502.c 2. Add missing modalias string for extcon-max8997.c. 3. Initialize the status data of extcon-intel-mrfld.c on probe time in order to prevent the mismatch issue. * tag 'extcon-next-for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon: extcon: sm5502: Add support for SM5504 extcon: sm5502: Refactor driver to use chip-specific struct dt-bindings: extcon: sm5502: Document siliconmitus,sm5504-muic dt-bindings: extcon: sm5502: Convert to DT schema extcon: sm5502: Implement i2c_driver->probe_new() extcon: sm5502: Use devm_regmap_add_irq_chip() extcon: max8997: Add missing modalias string extcon: sm5502: Drop invalid register write in sm5502_reg_data extcon: intel-mrfld: Sync hardware and software state on init
2021-06-23spi: rockchip: Support SPI_CS_HIGHJon Lin1-1/+13
1.Add standard spi-cs-high support 2.Refer to spi-controller.yaml for details Signed-off-by: Jon Lin <jon.lin@rock-chips.com> Link: https://lore.kernel.org/r/20210621104848.19539-2-jon.lin@rock-chips.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-23spi: rockchip: Support cs-gpioJon Lin1-5/+10
1.Add standard cs-gpio support 2.Refer to spi-controller.yaml for details Signed-off-by: Jon Lin <jon.lin@rock-chips.com> Link: https://lore.kernel.org/r/20210621104848.19539-1-jon.lin@rock-chips.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-23spi: rockchip: Wait for STB status in slave mode tx_xferJon Lin1-7/+14
After ROCKCHIP_SPI_VER2_TYPE2, SR->STB is a more accurate judgment bit for spi slave transmition. Signed-off-by: Jon Lin <jon.lin@rock-chips.com> Link: https://lore.kernel.org/r/20210621104800.19088-5-jon.lin@rock-chips.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-23spi: rockchip: Set rx_fifo interrupt waterline base on transfer itemJon Lin1-2/+2
The error here is to calculate the width as 8 bits. In fact, 16 bits should be considered. Signed-off-by: Jon Lin <jon.lin@rock-chips.com> Link: https://lore.kernel.org/r/20210621104800.19088-4-jon.lin@rock-chips.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-23spi: rockchip: add compatible string for rv1126Jon Lin1-0/+1
Add compatible string for rv1126 for potential applications. Signed-off-by: Jon Lin <jon.lin@rock-chips.com> Link: https://lore.kernel.org/r/20210621104800.19088-3-jon.lin@rock-chips.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-23regulator: bd9576: Fix uninitializes variable may_have_irqsColin Ian King1-1/+1
The boolean variable may_have_irqs is not ininitialized and is only being set to true in the case where chip is ROHM_CHIP_TYPE_BD9576. Fix this by ininitialized may_have_irqs to false. Addresses-Coverity: ("Uninitialized scalar variable") Fixes: e7bf1fa58c46 ("regulator: bd9576: Support error reporting") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/20210622144730.22821-1-colin.king@canonical.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-23regulator: max8893: Select REGMAP_I2C to fix build errorAxel Lin1-0/+1
Fix build error if REGMAP_I2C is not set. Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20210622141526.472175-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-23regulator: da9052: Ensure enough delay time for .set_voltage_time_selAxel Lin1-1/+2
Use DIV_ROUND_UP to prevent truncation by integer division issue. This ensures we return enough delay time. Also fix returning negative value when new_sel < old_sel. Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20210618141412.4014912-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-23mac80211: notify driver on mgd TX completionJohannes Berg3-5/+5
We have mgd_prepare_tx(), but sometimes drivers may want/need to take action when the exchange finishes, whether successfully or not. Add a notification to the driver on completion, i.e. call the new method mgd_complete_tx(). To unify the two scenarios, and to add more information, make both of them take a struct that has the duration (prepare only), subtype (both) and success (complete only). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210618133832.5d94e78f6230.I6dc979606b6f28701b740d7aab725f7853a5a155@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23spi: spi-sun6i: Fix chipselect/clock bugMirko Vogt1-1/+5
The current sun6i SPI implementation initializes the transfer too early, resulting in SCK going high before the transfer. When using an additional (gpio) chipselect with sun6i, the chipselect is asserted at a time when clock is high, making the SPI transfer fail. This is due to SUN6I_GBL_CTL_BUS_ENABLE being written into SUN6I_GBL_CTL_REG at an early stage. Moving that to the transfer function, hence, right before the transfer starts, mitigates that problem. Fixes: 3558fe900e8af (spi: sunxi: Add Allwinner A31 SPI controller driver) Signed-off-by: Mirko Vogt <mirko-dev|linux@nanl.de> Signed-off-by: Ralf Schlatterbeck <rsc@runtux.com> Link: https://lore.kernel.org/r/20210614144507.y3udezjfbko7eavv@runtux.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-23regulator: mt6358: Fix vdram2 .vsel_maskHsin-Hsiung Wang1-1/+1
The valid vsel value are 0 and 12, so the .vsel_mask should be 0xf. Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> Reviewed-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/1624424169-510-1-git-send-email-hsin-hsiung.wang@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-23drm/virtio: Add the fence in resource_flush if presentVivek Kasireddy1-6/+39
If the framebuffer associated with the plane contains a fence, then it is added to resource_flush and will be waited upon for a max of 50 msecs or until it is signalled by the Host. Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20210610232456.671905-4-vivek.kasireddy@intel.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2021-06-23drm/virtio: Prepare resource_flush to accept a fenceVivek Kasireddy2-3/+8
A fence will be added to resource_flush for resources that are guest blobs. Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20210610232456.671905-3-vivek.kasireddy@intel.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2021-06-23drm/virtio: Add fences for Guest blobsVivek Kasireddy1-7/+12
Add prepare and cleanup routines for primary planes as well where a fence is added only if the BO/FB associated with the plane is a guest blob. Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20210610232456.671905-2-vivek.kasireddy@intel.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2021-06-23udmabuf: configurable list_limit and size_limit_mbDongwon Kim1-2/+7
Default list_limit and size_limit_mb are not big enough to cover all possible use cases. For example, list_limit could be well over its default, 1024 if only one or several pages are chained in all individual list entries when creating dmabuf backed by >4MB buffer. list_limit and size_limit_mb are now defined as module parameters so that those can be optionally configured by root with proper values to remove these constraints. Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Dongwon Kim <dongwon.kim@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20210611212107.9876-1-dongwon.kim@intel.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2021-06-23mac80211: remove iwlwifi specific workaround that broke sta NDP txFelix Fietkau1-0/+3
Sending nulldata packets is important for sw AP link probing and detecting 4-address mode links. The checks that dropped these packets were apparently added to work around an iwlwifi firmware bug with multi-TID aggregation. Fixes: 41cbb0f5a295 ("mac80211: add support for HE") Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20210619101517.90806-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23mac80211_hwsim: record stats in non-netlink pathNguyen Dinh Phi1-0/+2
The data go through mac80211_hwsim_tx_frame_no_nl() wasn't counted. Signed-off-by: Nguyen Dinh Phi <phind.uet@gmail.com> Link: https://lore.kernel.org/r/20210622152429.881230-1-phind.uet@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23mac80211_hwsim: add concurrent channels scanning support over virtioWeilun Du1-10/+38
This fixed the crash when setting channels to 2 or more when communicating over virtio. Signed-off-by: Weilun Du <wdu@google.com> Link: https://lore.kernel.org/r/20210506180530.3418576-1-wdu@google.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23cfg80211: remove CFG80211_MAX_NUM_DIFFERENT_CHANNELSJohannes Berg1-5/+0
We no longer need to put any limits here, hardware will and mac80211-hwsim can do whatever it likes. The reason we had this was some accounting code (still mentioned in the comment) but that code was deleted in commit c781944b71f8 ("cfg80211: Remove unused cfg80211_can_use_iftype_chan()"). Link: https://lore.kernel.org/r/20210506221159.d1d61db1d31c.Iac4da68d54b9f1fdc18a03586bbe06aeb9515425@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23Merge tag 'phy-for-5.14_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-nextGreg Kroah-Hartman23-58/+1260
Vinod writes: phy-for-5.14 version 2 - Updates: - Yaml conversion for renesas,rcar-gen3 pcie phy and rockchip-usb-phy bindings - Support for devm_phy_get() taking NULL phy name - New support: - PCIe phy for Qualcomm IPQ60xx - PCIe phy for Qualcomm SDX55 - USB phy for RK3308 - CAN transceivers phy for TI TCAN104x - Innosilicon-based CSI dphy for rockchip * tag 'phy-for-5.14_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (36 commits) phy: Revert "phy: ralink: Kconfig: convert mt7621-pci-phy into 'bool'" phy: ti: dm816x: Fix the error handling path in 'dm816x_usb_phy_probe() phy: uniphier-pcie: Fix updating phy parameters phy/rockchip: add Innosilicon-based CSI dphy dt-bindings: phy: add yaml binding for rockchip-inno-csi-dphy phy: rockchip: remove redundant initialization of pointer cfg phy: phy-can-transceiver: Add support for generic CAN transceiver driver dt-bindings: phy: Add binding for TI TCAN104x CAN transceivers phy: core: Reword the comment specifying the units of max_link_rate to be Mbps phy: phy-mtk-hdmi: Remove redundant dev_err call in mtk_hdmi_phy_probe() phy: phy-mtk-mipi-dsi: Remove redundant dev_err call in mtk_mipi_tx_probe() phy: phy-mmp3-hsic: Remove redundant dev_err call in mmp3_hsic_phy_probe() phy: bcm-ns-usb3: Remove redundant dev_err call in bcm_ns_usb3_mdio_probe() MAINTAINERS: update marvell,armada-3700-utmi-phy.yaml reference phy: phy-twl4030-usb: use DEVICE_ATTR_RO macro dt-bindings: phy: convert rockchip-usb-phy.txt to YAML phy: phy-rockchip-inno-usb2: add support for RK3308 USB phy dt-bindings: phy: rockchip-inno-usb2: add compatible for rk3308 USB phy phy: stm32: manage optional vbus regulator on phy_power_on/off dt-bindings: phy: add vbus-supply optional property to phy-stm32-usbphyc ...
2021-06-23phy: Revert "phy: ralink: Kconfig: convert mt7621-pci-phy into 'bool'"Vinod Koul1-2/+2
This reverts commit 6eded551cefe ("phy: ralink: Kconfig: convert mt7621-pci-phy into 'bool'") as we don't want drivers to be built in and should be a module instead Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-23Merge tag 'drm-misc-next-fixes-2021-06-18' of git://anongit.freedesktop.org/drm/drm-misc into drm-nextDave Airlie2-27/+43
Short summary of fixes pull: * hyperv: advertise the correct formatmodifiers for its primary plane * dp_mst: VCPI fixes to make it work with StarTech hub * dp_mst: Fix build error Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/YMxgI1oluBpPyfu6@linux-uq9g.fritz.box
2021-06-23Merge tag 'drm/tegra/for-5.14-rc1' of ssh://git.freedesktop.org/git/tegra/linux into drm-nextDave Airlie8-20/+223
drm/tegra: Changes for v5.14-rc1 The two major changes here are fixed YUV support as well as scaling on Tegra186 and later. This allows Tegra DRM to be used, for example, as a video sink for the kmssink gstreamer plugin. The remainder of the changes are minor fixes. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thierry Reding <thierry.reding@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210611165157.3569315-1-thierry.reding@gmail.com
2021-06-22scsi: mvsas: Use DEVICE_ATTR_RO()/RW() macroZhen Lei1-17/+9
Use DEVICE_ATTR_RO()/RW() macro helper instead of plain DEVICE_ATTR(), which makes the code a bit shorter and easier to read. Link: https://lore.kernel.org/r/20210616034419.725-5-thunder.leizhen@huawei.com Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.