aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2021-06-21net: ipa: add IPA v3.1 configuration dataAlex Elder4-3/+541
Add support for the MSM8998 SoC, which includes IPA version 3.1. Originally proposed by AngeloGioacchino Del Regno. Link: https://lore.kernel.org/netdev/20210211175015.200772-6-angelogioacchino.delregno@somainline.org Signed-off-by: Alex Elder <elder@linaro.org> Acked-by: AngeloGioacchino Del Regno Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21net: ipa: introduce gsi_ring_setup()Alex Elder2-28/+51
Prior to IPA v3.5.1, there is no HW_PARAM_2 GSI register, which we use to determine the number of channels and endpoints per execution environment. In that case, we will just assume the number supported is the maximum supported by the driver. Introduce gsi_ring_setup() to encapsulate the code that determines the number of channels and endpoints. Update GSI_EVT_RING_COUNT_MAX so it is big enough to handle any available channel for all supported hardware (IPA v4.9 can have 23 channels and 24 event rings). Signed-off-by: Alex Elder <elder@linaro.org> Acked-by: AngeloGioacchino Del Regno Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21net: ipa: FLAVOR_0 register doesn't exist until IPA v3.5Alex Elder1-0/+15
The FLAVOR_0 version first appears in IPA v3.5, so avoid attempting to read it for versions prior to that. This register contains a concise definition of the number and direction of endpoints supported by the hardware, and without it we can't verify endpoint configuration in ipa_endpoint_config(). In this case, just indicate that any endpoint number is available for use. Originally proposed by AngeloGioacchino Del Regno. Link: https://lore.kernel.org/netdev/20210211175015.200772-3-angelogioacchino.delregno@somainline.org Signed-off-by: Alex Elder <elder@linaro.org> Acked-by: AngeloGioacchino Del Regno Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21net: ipa: disable misc clock gating for IPA v3.1Alex Elder1-5/+9
For IPA v3.1, a workaround is needed to disable gating on a MISC clock. I have no further explanation, but this is what the downstream code (msm-4.4) does. This was suggested in a patch from AngeloGioacchino Del Regno. Link: https://lore.kernel.org/netdev/20210211175015.200772-2-angelogioacchino.delregno@somainline.org Signed-off-by: Alex Elder <elder@linaro.org> Acked-by: AngeloGioacchino Del Regno Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21net: ipa: inter-EE interrupts aren't always availableAlex Elder2-4/+12
The GSI inter-EE interrupts are not supported prior to IPA v3.5. Don't attempt to initialize them in gsi_irq_setup() for hardware that does not support them. Originally proposed by AngeloGioacchino Del Regno. Link: https://lore.kernel.org/netdev/20210211175015.200772-4-angelogioacchino.delregno@somainline.org Signed-off-by: Alex Elder <elder@linaro.org> Acked-by: AngeloGioacchino Del Regno Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21Merge tag 'linux-can-fixes-for-5.13-20210619' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-canDavid S. Miller1-1/+2
Marc Kleine-Budde says: ==================== pull-request: can 2021-06-19 this is a pull request of 5 patches for net/master. The first patch is by Thadeu Lima de Souza Cascardo and fixes a potential use-after-free in the CAN broadcast manager socket, by delaying the release of struct bcm_op after synchronize_rcu(). Oliver Hartkopp's patch fixes a similar potential user-after-free in the CAN gateway socket by synchronizing RCU operations before removing gw job entry. Another patch by Oliver Hartkopp fixes a potential use-after-free in the ISOTP socket by omitting unintended hrtimer restarts on socket release. Oleksij Rempel's patch for the j1939 socket fixes a potential use-after-free by setting the SOCK_RCU_FREE flag on the socket. The last patch is by Pavel Skripkin and fixes a use-after-free in the ems_usb CAN driver. All patches are intended for stable and have stable@v.k.o on Cc. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21Merge tag 'wireless-drivers-2021-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-driversDavid S. Miller1-3/+10
Kalle Valo says: ==================== wireless-drivers fixes for v5.13 Only one important fix for an mwifiex regression. mwifiex * fix deadlock during rmmod or firmware reset, regression from cfg80211 RTNL changes in v5.12-rc1 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21nfp: flower-ct: check for error in nfp_fl_ct_offload_nft_flow()Dan Carpenter1-0/+2
The nfp_fl_ct_add_flow() function can fail so we need to check for failure. Fixes: 95255017e0a8 ("nfp: flower-ct: add nft flows to nft list") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21net: qualcomm: rmnet: fix two pointer math bugsDan Carpenter1-2/+2
We recently changed these two pointers from void pointers to struct pointers and it breaks the pointer math so now the "txphdr" points beyond the end of the buffer. Fixes: 56a967c4f7e5 ("net: qualcomm: rmnet: Remove some unneeded casts") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21net: iosm: remove an unnecessary NULL checkDan Carpenter1-1/+1
The address of &ipc_mux->ul_adb can't be NULL because it points to the middle of a non-NULL struct. Fixes: 9413491e20e1 ("net: iosm: encode or decode datagram") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: M Chetan Kumar <m.chetan.kumar@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21net: hns3: fix a double shift bugDan Carpenter1-3/+3
These flags are used to set and test bits like this: if (!test_bit(HCLGE_PTP_FLAG_TX_EN, &ptp->flags) || The issue is that test_bit() takes a bit number like 1, but we are passing BIT(1) instead and it's testing BIT(BIT(1)). This does not cause a problem because it is always done consistently and the bit values are very small. Fixes: 0bf5eb788512 ("net: hns3: add support for PTP") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21net: hns3: fix different snprintf() limitDan Carpenter1-3/+1
This patch doesn't affect runtime at all, it's just a correctness issue. The ptp->info.name[] buffer has 16 characters but the snprintf() limit was capped at 32 characters. Fortunately, HCLGE_DRIVER_NAME is "hclge" which isn't close to 16 characters so we're fine. Fixes: 0bf5eb788512 ("net: hns3: add support for PTP") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21hv_netvsc: Set needed_headroom according to VFHaiyang Zhang1-0/+5
Set needed_headroom according to VF if VF needs a bigger headroom. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21vrf: do not push non-ND strict packets with a source LLA through packet taps againAntoine Tenart1-7/+7
Non-ND strict packets with a source LLA go through the packet taps again, while non-ND strict packets with other source addresses do not, and we can see a clone of those packets on the vrf interface (we should not). This is due to a series of changes: Commit 6f12fa775530[1] made non-ND strict packets not being pushed again in the packet taps. This changed with commit 205704c618af[2] for those packets having a source LLA, as they need a lookup with the orig_iif. The issue now is those packets do not skip the 'vrf_ip6_rcv' function to the end (as the ones without a source LLA) and go through the check to call packet taps again. This check was changed by commit 6f12fa775530[1] and do not exclude non-strict packets anymore. Packets matching 'need_strict && !is_ndisc && is_ll_src' are now being sent through the packet taps again. This can be seen by dumping packets on the vrf interface. Fix this by having the same code path for all non-ND strict packets and selectively lookup with the orig_iif for those with a source LLA. This has the effect to revert to the pre-205704c618af[2] condition, which should also be easier to maintain. [1] 6f12fa775530 ("vrf: mark skb for multicast or link-local as enslaved to VRF") [2] 205704c618af ("vrf: packets with lladdr src needs dst at input with orig_iif when needs strict") Fixes: 205704c618af ("vrf: packets with lladdr src needs dst at input with orig_iif when needs strict") Cc: Stephen Suryaputra <ssuryaextr@gmail.com> Reported-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Antoine Tenart <atenart@kernel.org> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21gpio: mxc: Fix disabled interrupt wake-up supportLoic Poulain1-1/+1
A disabled/masked interrupt marked as wakeup source must be re-enable and unmasked in order to be able to wake-up the host. That can be done by flaging the irqchip with IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND. Note: It 'sometimes' works without that change, but only thanks to the lazy generic interrupt disabling (keeping interrupt unmasked). Reported-by: Michal Koziel <michal.koziel@emlogic.no> Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-06-21RDMA/hns: Use IDA interface to manage xrcd indexYangyang Li4-41/+25
Switch xrcd index allocation and release from hns own bitmap interface to IDA interface. Link: https://lore.kernel.org/r/1623325814-55737-7-git-send-email-liweihang@huawei.com Signed-off-by: Yangyang Li <liyangyang20@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-06-21RDMA/hns: Use IDA interface to manage pd indexYangyang Li4-37/+25
Switch pd index allocation and release from hns own bitmap interface to IDA interface. Link: https://lore.kernel.org/r/1623325814-55737-6-git-send-email-liweihang@huawei.com Signed-off-by: Yangyang Li <liyangyang20@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-06-21RDMA/hns: Use IDA interface to manage mtpt indexYangyang Li5-48/+43
Switch mtpt index allocation and release from hns own bitmap interface to IDA interface. Link: https://lore.kernel.org/r/1623325814-55737-5-git-send-email-liweihang@huawei.com Signed-off-by: Yangyang Li <liyangyang20@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-06-21RDMA/hns: Remove unused RR mechanismYangyang Li6-19/+12
Round-robin (RR) is no longer used in the allocation of the bitmap table, and all the function input parameters that use this mechanism are BITMAP_NO_RR. The code that defines and uses the RR needs to be deleted. Link: https://lore.kernel.org/r/1623325814-55737-4-git-send-email-liweihang@huawei.com Signed-off-by: Yangyang Li <liyangyang20@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-06-21RDMA/hns: Remove the unused hns_roce_bitmap_free_range functionYangyang Li2-14/+1
hns_roce_bitmap_free_range() is only called inside hns_roce_bitmap_free(), and the input parameter "cnt" is set to a constant 1. In addition, the driver does not use alloc_range scenarios, so free_range does not need to exist. Link: https://lore.kernel.org/r/1623325814-55737-3-git-send-email-liweihang@huawei.com Signed-off-by: Yangyang Li <liyangyang20@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-06-21RDMA/hns: Remove the unused hns_roce_bitmap_alloc_range functionYangyang Li2-41/+0
The function is no longer used. Link: https://lore.kernel.org/r/1623325814-55737-2-git-send-email-liweihang@huawei.com Signed-off-by: Yangyang Li <liyangyang20@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-06-21RDMA/core: Fix incorrect print format specifierWenpeng Liang15-45/+45
There are some '%u' for 'int' and '%d' for 'unsigend int', they should be fixed. Link: https://lore.kernel.org/r/1623325232-30900-1-git-send-email-liweihang@huawei.com Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-06-21Merge series "regulator: qcom,rpmh-regulator: Add support for pmic available on SA8155p-adp board" from Bhupesh Sharma <bhupesh.sharma@linaro.org>:Mark Brown1-12/+50
Changes since v2: ----------------- - v2 series can be found here: https://lore.kernel.org/linux-arm-msm/20210615074543.26700-1-bhupesh.sharma@linaro.org/T/#m8303d27d561b30133992da88198abb78ea833e21 - Addressed review comments from Bjorn and Mark. - As per suggestion from Bjorn, seperated the patches in different patchsets (specific to each subsystem) to ease review and patch application. Changes since v1: ----------------- - v1 series can be found here: https://lore.kernel.org/linux-arm-msm/20210607113840.15435-1-bhupesh.sharma@linaro.org/T/#mc524fe82798d4c4fb75dd0333318955e0406ad18 - Addressed review comments from Bjorn and Vinod received on the v1 series. This series adds the regulator support code for SA8155p-adp board which is based on Qualcomm snapdragon sa8155p SoC which in turn is simiar to the sm8150 SoC. This board supports a new PMIC PMM8155AU. While at it, also make some cosmetic changes to the regulator driver and dt-bindings to make sure the compatibles are alphabetical and also fix issues with extra comma(s) at the end of terminator line(s). Cc: Mark Brown <broonie@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Bhupesh Sharma (5): dt-bindings: regulator: qcom,rpmh-regulator: Arrange compatibles alphabetically dt-bindings: regulator: qcom,rpmh-regulator: Add compatible for SA8155p-adp board pmic regulator: qcom-rpmh: Cleanup terminator line commas regulator: qcom-rpmh: Add terminator at the end of pm7325x_vreg_data[] array regulator: qcom-rpmh: Add new regulator found on SA8155p adp board .../regulator/qcom,rpmh-regulator.yaml | 17 ++--- drivers/regulator/qcom-rpmh-regulator.c | 62 +++++++++++++++---- 2 files changed, 59 insertions(+), 20 deletions(-) -- 2.31.1
2021-06-21Merge series "Extend regulator notification support" from Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>:Mark Brown445-2386/+5680
Extend regulator notification support This series extends the regulator notification and error flag support. Initial discussion on the topic can be found here: https://lore.kernel.org/lkml/6046836e22b8252983f08d5621c35ececb97820d.camel@fi.rohmeurope.com/ In a nutshell - the series adds: 1. WARNING level events/error flags. (Patch 3) Current regulator 'ERROR' event notifications for over/under voltage, over current and over temperature are used to indicate condition where monitored entity is so badly "off" that it actually indicates a hardware error which can not be recovered. The most typical hanling for that is believed to be a (graceful) system-shutdown. Here we add set of 'WARNING' level flags to allow sending notifications to consumers before things are 'that badly off' so that consumer drivers can implement recovery-actions. 2. Device-tree properties for specifying limit values. (Patches 1, 5) Add limits for above mentioned 'ERROR' and 'WARNING' levels (which send notifications to consumers) and also for a 'PROTECTION' level (which will be used to immediately shut-down the regulator(s) W/O informing consumer drivers. Typically implemented by hardware). Property parsing is implemented in regulator core which then calls callback operations for limit setting from the IC drivers. A warning is emitted if protection is requested by device tree but the underlying IC does not support configuring requested protection. 3. Helpers which can be registered by IC. (Patch 4) Target is to avoid implementing IRQ handling and IRQ storm protection in each IC driver. (Many of the ICs implementin these IRQs do not allow masking or acking the IRQ but keep the IRQ asserted for the whole duration of problem keeping the processor in IRQ handling loop). 4. Emergency poweroff function (refactored out of the thermal_core to kernel/reboot.c) which is called if IC fires error IRQs but IC reading fails and given retry-count is exceeded. (Patches 2, 4) Please note that the mutex in the emergency shutdown was replaced by a simple atomic in order to allow call from any context. The helper was attempted to be done so it could be used to implement roughly same logic as is used in qcom-labibb regulator. This means amongst other things a safety shut-down if IC registers are not readable. Using these shut-down retry counters are optional. The idea is that the helper could be also used by simpler ICs which do not provide status register(s) which can be used to check if error is still active. ICs which do not have such status register can simply omit the 'renable' callback (and retry-counts etc) - and helper assumes the situation is Ok and re-enables IRQ after given time period. If problem persists the handler is ran again and another notification is sent - but at least the delay allows processor to avoid IRQ loop. Patch 7 takes this notification support in use at BD9576MUF. Patch 8 is related to MFD change which is not really related to the RFC here. It was added to this series in order to avoid potential conflicts. Patch 9 adds a maintainers entry. Changelog v10-RESEND: - rebased on v5.13-rc4 Changelog v10: - rebased on v5.13-rc2 - Move rdev_*() print macros to the internal.h and use rdev_dbg() from irq_helpers.c - Export rdev_get_name() and move it from coupler.h to driver.h for others to use. (It was already in coupler.h but not exported - usage was limited and coupler.h does not sound like optimal place as rdev_name is not only used by coupled regulators) - Send all regulator notifications from irq_helpers.c at one OR'd event for the sake of simplicity. For BD9576 this does not matter as it has own IRQ for each event case. Header defining events says they may be OR'd. - Change WARN() at protection shutdown to pr_emerg as suggested by Petr. Changelog v9: - rebases on v5.13-rc1 - Update thermal documentation - Fix regulator notification event number Changelog v8: - split shutdown API adding and thermal core taking it in use to own patches. - replace the spinlock with atomic when ensuring the emergency shutdown is only called once. Changelog v7: general: - rebased on v5.12-rc7 - new patch for refactoring the hw-failure reboot logic out of thermal_core.c for others to use. notification helpers: - fix regulator error_flags query - grammar/typos - do not BUG() but attempt to shut-down the system - use BITS_PER_TYPE() Changelog v6: Add MAINTAINERS entry Changes to IRQ notifiers - move devm functions to drivers/regulator/devres.c - drop irq validity check - use devm_add_action_or_reset() - fix styling issues - fix kerneldocs Changelog v5: - Fix the badly formatted pr_emerg() call. Changelog v4: - rebased on v5.12-rc6 - dropped RFC - fix external FET DT-binding. - improve prints for cases when expecting HW failure. - styling and typos Changelog v3: Regulator core: - Fix dangling pointer access at regulator_irq_helper() stpmic1_regulator: - fix function prototype (compile error) bd9576-regulator: - Update over current limits to what was given in new data-sheet (REV00K) - Allow over-current monitoring without external FET. Set limits to values given in data-sheet (REV00K). Changelog v2: Generic: - rebase on v5.12-rc2 + BD9576 series - Split devm variant of delayed wq to own series Regulator framework: - Provide non devm variant of IRQ notification helpers - shorten dt-property names as suggested by Rob - unconditionally call map_event in IRQ handling and require it to be populated BD9576 regulators: - change the FET resistance property to micro-ohms - fix voltage computation in OC limit setting
2021-06-21drm/panel: Add bus_format and bus_flags for EDT ETM0430G0DH6Stefan Riedmueller1-0/+2
Add corresponding bus_format and bus_flags for the EDT ETM0430G0DH6 display. Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210621150930.86617-3-s.riedmueller@phytec.de
2021-06-21drm/panel: Add connector_type for some EDT displaysStefan Riedmueller1-0/+2
The connector_type for following two EDT displays is missing: - EDT ETM0430G0DH6 - EDT ETM0700G0BDH6 Both are parallel displays thus add the corresponding connector_type. Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210621150930.86617-2-s.riedmueller@phytec.de
2021-06-21drm/panel: Add connector_type and bus_format for AUO G104SN02 V2 panelStefan Riedmueller1-0/+2
The AUO G104SN02 V2 is an LVDS display which supports 6 and 8 bpc PSWG. Add the corresponding connector type and 8 bpc as default bus_format. Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210621150930.86617-1-s.riedmueller@phytec.de
2021-06-21RDMA/hns: Clean SRQC structure definitionXi Wang2-93/+4
Remove unused members in srq context structure. Link: https://lore.kernel.org/r/1624262443-24528-10-git-send-email-liweihang@huawei.com Signed-off-by: Xi Wang <wangxi11@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-06-21RDMA/hns: Use new interface to write DB related fieldsYixing Liu2-78/+49
Use hr_write_reg() instead of roce_set_field(). Link: https://lore.kernel.org/r/1624262443-24528-9-git-send-email-liweihang@huawei.com Signed-off-by: Yixing Liu <liuyixing1@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-06-21RDMA/hns: Use new interface to write FRMR fieldsYixing Liu2-28/+21
Use "hr_reg_write" to replace "roce_set_filed". Link: https://lore.kernel.org/r/1624262443-24528-8-git-send-email-liweihang@huawei.com Signed-off-by: Yixing Liu <liuyixing1@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-06-21RDMA/hns: Use new interface to get CQE fieldsLang Cheng2-96/+47
WQE_INDEX and OPCODE and QPN of CQE use redundant masks. Just remove them. Link: https://lore.kernel.org/r/1624262443-24528-7-git-send-email-liweihang@huawei.com Signed-off-by: Lang Cheng <chenglang@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-06-21RDMA/hns: Use new interface to modify QP contextLang Cheng2-863/+431
Fill all QPC fileds with hr_reg_*() instead of roce_set_*(). SQPN is used for HIP08 ES only, it should be removed. Link: https://lore.kernel.org/r/1624262443-24528-6-git-send-email-liweihang@huawei.com Signed-off-by: Lang Cheng <chenglang@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-06-21RDMA/hns: Use new interface to write CQ context.Yixing Liu2-120/+78
Use hr_reg_*() to write CQ context, it's simpler than roce_set_*(). Link: https://lore.kernel.org/r/1624262443-24528-5-git-send-email-liweihang@huawei.com Signed-off-by: Yixing Liu <liuyixing1@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-06-21RDMA/hns: Add hr_reg_write_bool()Lang Cheng2-12/+20
In order to avoid to do bitwise operations on a boolean value, add a new register interface to avoid sparse comlaint about "dubious: x & !y" when calling hr_reg_write(ctx, field, !!val). Fixes: dc504774408b ("RDMA/hns: Use new interface to set MPT related fields") Fixes: 495c24808ce7 ("RDMA/hns: Add XRC subtype in QPC and XRC type in SRQC") Link: https://lore.kernel.org/r/1624262443-24528-4-git-send-email-liweihang@huawei.com Signed-off-by: Lang Cheng <chenglang@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-06-21RDMA/hns: Add a check to ensure integer mtu is positiveWeihang Li1-5/+10
GCC may reports an running time assert error when a value calculated from ib_mtu_enum_to_int() is using as 'val' in FIELD_PREDP: include/linux/compiler_types.h:328:38: error: call to '__compiletime_assert_1524' declared with attribute error: FIELD_PREP: value too large for the field So a check is added about whether integer mtu from ib_mtu_enum_to_int() is negative to avoid this warning. Link: https://lore.kernel.org/r/1624262443-24528-3-git-send-email-liweihang@huawei.com Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-06-21RDMA/hns: Do not use !! for values that are already bool when calling hr_reg_write()Weihang Li1-2/+1
There is no need to use "!!" before "eq->eqe_size == HNS_ROCE_V3_EQE_SIZE", or sparse will complain about "dubious: x & !y". Fixes: 782832f25404 ("RDMA/hns: Simplify the function config_eqc()") Link: https://lore.kernel.org/r/1624262443-24528-2-git-send-email-liweihang@huawei.com Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-06-21drm/bridge: ti-sn65dsi83: Replace connector format patching with atomic_get_input_bus_fmtsMarek Vasut1-4/+31
Patching the connector format is causing various problematic side effects. Implement .atomic_get_input_bus_fmts callback instead, which sets up the input (DSI-end) format, and that format can then be used in pipeline format negotiation between the DSI-end of this bridge and the other component closer to the scanout engine. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Adam Ford <aford173@gmail.com> Cc: Douglas Anderson <dianders@chromium.org> Cc: Frieder Schrempf <frieder.schrempf@kontron.de> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Loic Poulain <loic.poulain@linaro.org> Cc: Philippe Schenker <philippe.schenker@toradex.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Stephen Boyd <swboyd@chromium.org> Cc: Valentin Raevsky <valentin@compulab.co.il> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210620224208.184719-1-marex@denx.de
2021-06-21ACPI: EC: trust DSDT GPE for certain HP laptopZhang Rui1-1/+20
On HP Pavilion Gaming Laptop 15-cx0xxx, the ECDT EC and DSDT EC share the same port addresses but different GPEs. And the DSDT GPE is the right one to use. The current code duplicates DSDT EC with ECDT EC if the port addresses are the same, and uses ECDT GPE as a result, which breaks this machine. Introduce a new quirk for the HP laptop to trust the DSDT GPE, and avoid duplicating even if the port addresses are the same. Link: https://bugzilla.kernel.org/show_bug.cgi?id=209989 Reported-and-tested-by: Shao Fu, Chen <leo881003@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-06-21ACPI: scan: Simplify acpi_table_events_fn()Rafael J. Wysocki3-30/+13
Notice that the table field of struct acpi_table_events_work is never read and its event field is always equal to ACPI_TABLE_EVENT_LOAD, so both of them are redundant. Accordingly, drop struct acpi_table_events_work and use struct work_struct directly instead of it, simplify acpi_scan_table_handler() and rename it to acpi_scan_table_notify(). Moreover, make acpi_bus_table_handler() check the event code against ACPI_TABLE_EVENT_LOAD before calling acpi_scan_table_notify(), so it is not necessary to do that check in the latter. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-06-21Merge back cpufreq material for v5.14.Rafael J. Wysocki5-34/+237
2021-06-21drm/i915/eb: Fix pagefault disabling in the first slowpathDaniel Vetter1-2/+0
In commit ebc0808fa2da0548a78e715858024cb81cd732bc Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Tue Oct 18 13:02:51 2016 +0100 drm/i915: Restrict pagefault disabling to just around copy_from_user() we entirely missed that there's a slow path call to eb_relocate_entry (or i915_gem_execbuffer_relocate_entry as it was called back then) which was left fully wrapped by pagefault_disable/enable() calls. Previously any issues with blocking calls where handled by the following code: /* we can't wait for rendering with pagefaults disabled */ if (pagefault_disabled() && !object_is_idle(obj)) return -EFAULT; Now at this point the prefaulting was still around, which means in normal applications it was very hard to hit this bug. No idea why the regressions in igts weren't caught. Now this all changed big time with 2 patches merged closely together. First commit 2889caa9232109afc8881f29a2205abeb5709d0c Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Fri Jun 16 15:05:19 2017 +0100 drm/i915: Eliminate lots of iterations over the execobjects array removes the prefaulting from the first relocation path, pushing it into the first slowpath (of which this patch added a total of 3 escalation levels). This would have really quickly uncovered the above bug, were it not for immediate adding a duct-tape on top with commit 7dd4f6729f9243bd7046c6f04c107a456bda38eb Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Fri Jun 16 15:05:24 2017 +0100 drm/i915: Async GPU relocation processing by pushing all all the relocation patching to the gpu if the buffer was busy, which avoided all the possible blocking calls. The entire slowpath was then furthermore ditched in commit 7dc8f1143778a35b190f9413f228b3cf28f67f8d Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Mar 11 16:03:10 2020 +0000 drm/i915/gem: Drop relocation slowpath and resurrected in commit fd1500fcd4420eee06e2c7f3aa6067b78ac05871 Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Date: Wed Aug 19 16:08:43 2020 +0200 Revert "drm/i915/gem: Drop relocation slowpath". but this did not further impact what's going on. Since pagefault_disable/enable is an atomic section, any sleeping in there is prohibited, and we definitely do that without gpu relocations since we have to wait for the gpu usage to finish before we can patch up the relocations. Reviewed-by: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Jon Bloomfield <jon.bloomfield@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Jason Ekstrand <jason@jlekstrand.net> Link: https://patchwork.freedesktop.org/patch/msgid/20210618214503.1773805-1-daniel.vetter@ffwll.ch
2021-06-21drm: add a locked version of drm_is_current_masterDesmond Cheong Zhi Xi1-19/+32
While checking the master status of the DRM file in drm_is_current_master(), the device's master mutex should be held. Without the mutex, the pointer fpriv->master may be freed concurrently by another process calling drm_setmaster_ioctl(). This could lead to use-after-free errors when the pointer is subsequently dereferenced in drm_lease_owner(). The callers of drm_is_current_master() from drm_auth.c hold the device's master mutex, but external callers do not. Hence, we implement drm_is_current_master_locked() to be used within drm_auth.c, and modify drm_is_current_master() to grab the device's master mutex before checking the master status. Reported-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com> Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210620110327.4964-2-desmondcheongzx@gmail.com
2021-06-21RDMA/mlx5: Enable Relaxed Ordering by default for kernel ULPsAvihai Horon2-5/+10
Relaxed Ordering is a capability that can only benefit users that support it. All kernel ULPs should support Relaxed Ordering, as they are designed to read data only after observing the CQE and use the DMA API correctly. Hence, implicitly enable Relaxed Ordering by default for MR transfers in kernel ULPs. Link: https://lore.kernel.org/r/b7e820aab7402b8efa63605f4ea465831b3b1e5e.1623236426.git.leonro@nvidia.com Signed-off-by: Avihai Horon <avihaih@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-06-21drm/amdgpu: fix amdgpu_preempt_mgr_new()Dan Carpenter1-1/+1
There is a reversed if statement in amdgpu_preempt_mgr_new() so it always returns -ENOMEM. Fixes: 09b020bb05a5 ("Merge tag 'drm-misc-next-2021-06-09' of git://anongit.freedesktop.org/drm/drm-misc into drm-next") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/YMxbQXg/Wqm0ACxt@mwanda Signed-off-by: Christian König <christian.koenig@amd.com>
2021-06-21regulator: bd9576: Fix the driver name in id tableMatti Vaittinen1-2/+2
Driver name was changed in MFD cell: https://lore.kernel.org/lkml/560b9748094392493ebf7af11b6cc558776c4fd5.1613031055.git.matti.vaittinen@fi.rohmeurope.com/ Fix the ID table to match this. Fixes: b1b3ced38979 ("mfd: Support ROHM BD9576MUF and BD9573MUF") Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/e0483149333626b3bea298f305cf2809429d1822.1622628334.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-21regulator: bd9576: Support error reportingMatti Vaittinen1-124/+926
BD9573 and BD9576 support set of "protection" interrupts for "fatal" issues. Those lead to SOC reset as PMIC shuts the power outputs. Thus there is no relevant IRQ handling for them. Few "detection" interrupts were added to the BD9576 with the idea that SOC could take some recovery-action before error gets unrecoverable. Add support for over and under voltage detection for Vout1 ... Vout4 and VoutL1. Add over-current detection for VoutS1 and finally a thermal warning (common for all regulators) which alerts 30 C before temperature reaches the thermal shutdown point. This way consumer drivers can build error-recovery mechanisms. Unfortunately the BD9576 interrupt logic was not re-evaluated. IRQs are not designed to be properly acknowleged - and IRQ line is kept active for whole duration of error condition (in comparison to informing only about state change). Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/05c4f7a8e30ef1d4d5f3ceab07da4ebe68f5b4ed.1622628334.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-21regulator: add property parsing and callbacks to set protection limitsMatti Vaittinen5-5/+211
Add DT property parsing code and setting callback for regulator over/under voltage, over-current and temperature error limits. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/e7b8007ba9eae7076178bf3363fb942ccb1cc9a5.1622628334.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-21regulator: IRQ based event/error notification helpersMatti Vaittinen4-8/+472
Provide helper function for IC's implementing regulator notifications when an IRQ fires. The helper also works for IRQs which can not be acked. Helper can be set to disable the IRQ at handler and then re-enabling it on delayed work later. The helper also adds regulator_get_error_flags() errors in cache for the duration of IRQ disabling. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/ebdf86d8c22b924667ec2385330e30fcbfac0119.1622628334.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-21regulator: move rdev_print helpers to internal.hMatti Vaittinen2-11/+12
The rdev print helpers are a nice way to print messages related to a specific regulator device. Move them from core.c to internal.h As the rdev print helpers use rdev_get_name() export it from core.c. Also move the declaration from coupler.h to driver.h because the rdev name is not just a coupled regulator property. I guess the main audience for rdev_get_name() will be the regulator core and drivers. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/dc7fd70dc31de4d0e820b7646bb78eeb04f80735.1622628333.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-21thermal: Use generic HW-protection shutdown APIMatti Vaittinen1-59/+4
The hardware shutdown function was exported from kernel/reboot for other subsystems to use. Logic is copied from the thermal_core. The protection mutex is replaced by an atomic_t to allow calls also from an IRQ context. Also the WARN() was replaced by pr_emerg() based on discussions here: https://lore.kernel.org/lkml/YJuPwAZroVZ%2Fw633@alley/ and here: https://lore.kernel.org/linux-iommu/20210331093104.383705-4-geert+renesas@glider.be/ Use the exported API instead of implementing own just for the thermal_core. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/5531e89d9e710f5d10e7cdce3ee58957335b9e03.1622628333.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown <broonie@kernel.org>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.