aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2021-06-21watchdog: of_xilinx_wdt: Add comment to spinlockSrinivas Goud1-1/+1
Based on checkpatch every spinlock should be documented. The patch is fixing this issue: ./scripts/checkpatch.pl --strict -f drivers/watchdog/of_xilinx_wdt.c CHECK: spinlock_t definition without comment + spinlock_t spinlock; Signed-off-by: Srinivas Goud <srinivas.goud@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210329161939.37680-2-srinivas.neeli@xilinx.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-06-21watchdog: meson_wdt: Use device_get_match_data() helperTian Tao1-7/+1
Use the device_get_match_data() helper instead of open coding. Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/1617243921-56774-1-git-send-email-tiantao6@hisilicon.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-06-21watchdog: Fix a typo in KconfigWong Vee Khee1-1/+1
s/thershold/threshold Cc: Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com> Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210401033209.9929-1-vee.khee.wong@linux.intel.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-06-21watchdog: it87_wdt: remove useless functionJiapeng Chong1-8/+0
Fix the following clang warning: drivers/watchdog/it87_wdt.c:155:20: warning: unused function 'superio_outw' [-Wunused-function]. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/1618306460-57286-1-git-send-email-jiapeng.chong@linux.alibaba.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-06-21watchdog: aspeed: fix hardware timeout calculationTao Ren1-1/+1
Fix hardware timeout calculation in aspeed_wdt_set_timeout function to ensure the reload value does not exceed the hardware limit. Fixes: efa859f7d786 ("watchdog: Add Aspeed watchdog driver") Reported-by: Amithash Prasad <amithash@fb.com> Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210417034249.5978-1-rentao.bupt@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-06-21watchdog: clean up the Kconfig fileRandy Dunlap1-23/+28
Change a non-working ftp: URL to https:. Wrap long lines earlier. Spell "IP" with capital letters. Change "it`s" to "it's". The backtick (grave accent) is not an apostrophe. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: linux-watchdog@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210419000704.17745-1-rdunlap@infradead.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-06-21watchdog: Use sysfs_emit() and sysfs_emit_at() in "show" functionsJuerg Haefliger4-18/+21
Convert sprintf() in sysfs "show" functions to sysfs_emit() and sysfs_emit_at() in order to check for buffer overruns in sysfs outputs. Signed-off-by: Juerg Haefliger <juergh@canonical.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210511061812.480172-1-juergh@canonical.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-06-21watchdog: Fix possible use-after-free by calling del_timer_sync()Zou Wei2-2/+2
This driver's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Link: https://lore.kernel.org/r/1620802676-19701-1-git-send-email-zou_wei@huawei.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-06-21watchdog: sc520_wdt: Fix possible use-after-free in wdt_turnoff()Zou Wei1-1/+1
This module's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/1620716691-108460-1-git-send-email-zou_wei@huawei.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-06-21watchdog: Add {min,max}_timeout sysfs nodesJuerg Haefliger1-0/+20
The valid range for the 'timeout' value is useful information so expose the min and max timeout values via sysfs. Signed-off-by: Juerg Haefliger <juergh@canonical.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210511062953.485252-1-juergh@canonical.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-06-21watchdog: sp805: Fix kernel doc descriptionAndy Shevchenko1-1/+2
Kernel doc validation script is not happy CHECK .../sp805_wdt.c .../sp805_wdt.c:73: warning: Function parameter or member 'rate' not described in 'sp805_wdt' Fix this by describing rate parameter. While at it, mark clk one optional. Fixes: dc0e4a3bb7dc ("watchdog: sp805: Add clock-frequency property") Cc: Srinath Mannam <srinath.mannam@broadcom.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210517174912.26419-1-andriy.shevchenko@linux.intel.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-06-21watchdog: sp805: Use devm_clk_get_optional()Andy Shevchenko1-21/+19
Replace open coded variants of devm_clk_get_optional(). While at it, drop unneeded OF and ACPI dependency as the APIs in use are provider agnostic. Cc: Srinath Mannam <srinath.mannam@broadcom.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Srinath Mannam <srinath.mannam@broadcom.com> Link: https://lore.kernel.org/r/20210517174456.22050-1-andriy.shevchenko@linux.intel.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-06-21watchdog/hpwdt: New PCI IDsJerry Hoemann1-0/+1
New hardware with new PCI ID info. Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/1620878612-24736-2-git-send-email-jerry.hoemann@hpe.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-06-21watchdog: dw_wdt: Fix duplicate included linux/kernel.hJiapeng Chong1-5/+4
Clean up the following includecheck warning: ./drivers/watchdog/dw_wdt.c: linux/kernel.h is included more than once. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/1620904182-74107-1-git-send-email-jiapeng.chong@linux.alibaba.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-06-21watchdog: Fix possible use-after-free in wdt_startup()Zou Wei1-1/+1
This module's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/1620716495-108352-1-git-send-email-zou_wei@huawei.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-06-21watchdog: imx2_wdt: avoid to ping before resume backRobin Gong1-0/+10
Since watchdog_ping_work is not freezable so that it maybe scheduled before imx2_wdt_resume where watchdog clock enabled, hence, kernel will hang in imx2_wdt_ping without clock, and then watchdog reset happen. Add clk_is_on to prevent the above case by ignoring ping until watchdog driver resume back indeed. Signed-off-by: Robin Gong <yibin.gong@nxp.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/1621012875-22667-1-git-send-email-yibin.gong@nxp.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-06-21watchdog: mtx-1: drop au1000.h header fileRandy Dunlap1-2/+0
The mtx-1_wdt driver does not need the au1000.h header file. Instead, the header file causes build errors, so drop it. This change fixes multiple build errors, all in au1000.h. E.g.: In file included from ../drivers/watchdog/mtx-1_wdt.c:44: ../arch/mips/include/asm/mach-au1x00/au1000.h: In function 'alchemy_rdsys': ../arch/mips/include/asm/mach-au1x00/au1000.h:603:36: error: implicit declaration of function 'KSEG1ADDR'; did you mean 'CKSEG1ADDR'? [-Werror=implicit-function-declaration] 603 | void __iomem *b = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR); ../arch/mips/include/asm/mach-au1x00/au1000.h:603:20: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 603 | void __iomem *b = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR); Fixes: da2a68b3eb47 ("watchdog: Enable COMPILE_TEST where possible") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: linux-watchdog@vger.kernel.org Cc: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210516211703.25349-1-rdunlap@infradead.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-06-21watchdog: sbsa: Support architecture version 1Shaokun Zhang1-6/+48
For Armv8.6, The frequency of CNTFRQ_EL0 is standardized to a frequency of 1GHz, so Arm Base System Architecture 1.0[1] has introduced watchdog revision 1 that increases the length the watchdog offset register to 48 bit, while other operation of the watchdog remains the same. The driver can determine which version of the watchdog is implemented through the watchdog interface identification register (W_IID). If the version is 0x1, the watchdog offset register will be 48 bit, otherwise it will be 32 bit. [1] https://developer.arm.com/documentation/den0094/latest Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Cc: Al Stone <al.stone@linaro.org> Cc: Jianchao Hu <hujianchao@hisilicon.com> Cc: Huiqiang Wang <wanghuiqiang@huawei.com> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/1621253408-23401-1-git-send-email-zhangshaokun@hisilicon.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-06-21watchdog: keembay: Typo corrections and other blank operationsShruthi Sanil1-4/+7
Corrected typos, aligned the tabs and added new lines wherever required for better readability Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Kris Pan <kris.pan@intel.com> Signed-off-by: Shruthi Sanil <shruthi.sanil@intel.com> Link: https://lore.kernel.org/r/20210517174953.19404-10-shruthi.sanil@intel.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-06-21watchdog: keembay: WDT SMC handler MACRO name updateShruthi Sanil1-3/+3
Updated the WDT SMC handler MACRO name to make it clear that its a ARM SMC handler that helps in clearing the WDT interrupt bit. Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Kris Pan <kris.pan@intel.com> Signed-off-by: Shruthi Sanil <shruthi.sanil@intel.com> Link: https://lore.kernel.org/r/20210517174953.19404-9-shruthi.sanil@intel.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-06-21watchdog: keembay: Removed timeout update in the TO ISRShruthi Sanil1-1/+0
In the TO ISR removed updating the Timeout value because its not serving any purpose as the timer would have already expired and the system would be rebooting. Fixes: fa0f8d51e90d ("watchdog: Add watchdog driver for Intel Keembay Soc") Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Kris Pan <kris.pan@intel.com> Signed-off-by: Shruthi Sanil <shruthi.sanil@intel.com> Link: https://lore.kernel.org/r/20210517174953.19404-7-shruthi.sanil@intel.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-06-21watchdog: keembay: MACRO for WDT enable and disable valuesShruthi Sanil1-2/+4
Introduced MACRO's for WDT enable and disable values for better readability Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Kris Pan <kris.pan@intel.com> Signed-off-by: Shruthi Sanil <shruthi.sanil@intel.com> Link: https://lore.kernel.org/r/20210517174953.19404-8-shruthi.sanil@intel.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-06-21watchdog: keembay: Remove timeout update in the WDT start functionShruthi Sanil1-1/+0
Removed set timeout from the start WDT function. There is a function defined to set the timeout. Hence no need to set the timeout again in start function as the timeout would have been already updated before calling the start/enable. Fixes: fa0f8d51e90d ("watchdog: Add watchdog driver for Intel Keembay Soc") Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Kris Pan <kris.pan@intel.com> Signed-off-by: Shruthi Sanil <shruthi.sanil@intel.com> Link: https://lore.kernel.org/r/20210517174953.19404-6-shruthi.sanil@intel.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-06-21watchdog: keembay: Clear either the TO or TH interrupt bitShruthi Sanil1-3/+4
During the interrupt service routine of the TimeOut interrupt and the ThresHold interrupt, the respective interrupt clear bit have to be cleared and not both. Fixes: fa0f8d51e90d ("watchdog: Add watchdog driver for Intel Keembay Soc") Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Kris Pan <kris.pan@intel.com> Signed-off-by: Shruthi Sanil <shruthi.sanil@intel.com> Link: https://lore.kernel.org/r/20210517174953.19404-5-shruthi.sanil@intel.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-06-21watchdog: keembay: Update pretimeout to zero in the TH ISRShruthi Sanil1-0/+2
The pretimeout has to be updated to zero during the ISR of the ThresHold interrupt. Else the TH interrupt would be triggerred for every tick until the timeout. Fixes: fa0f8d51e90d ("watchdog: Add watchdog driver for Intel Keembay Soc") Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Kris Pan <kris.pan@intel.com> Signed-off-by: Shruthi Sanil <shruthi.sanil@intel.com> Link: https://lore.kernel.org/r/20210517174953.19404-4-shruthi.sanil@intel.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-06-21watchdog: keembay: Upadate WDT pretimeout for every update in timeoutShruthi Sanil1-0/+1
The pre-timeout value to be programmed to the register has to be calculated and updated for every change in the timeout value. Else the threshold time wouldn't be calculated to its corresponding timeout. Fixes: fa0f8d51e90d ("watchdog: Add watchdog driver for Intel Keembay Soc") Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Kris Pan <kris.pan@intel.com> Signed-off-by: Shruthi Sanil <shruthi.sanil@intel.com> Link: https://lore.kernel.org/r/20210517174953.19404-3-shruthi.sanil@intel.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-06-21watchdog: keembay: Update WDT pre-timeout during the initializationShruthi Sanil1-0/+3
The pretimeout register has a default reset value. Hence when a smaller WDT timeout is set which would be lesser than the default pretimeout, the system behaves abnormally, starts triggering the pretimeout interrupt even when the WDT is not enabled, most of the times leading to system crash. Hence an update in the pre-timeout is also required for the default timeout that is being configured. Fixes: fa0f8d51e90d ("watchdog: Add watchdog driver for Intel Keembay Soc") Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Kris Pan <kris.pan@intel.com> Signed-off-by: Shruthi Sanil <shruthi.sanil@intel.com> Link: https://lore.kernel.org/r/20210517174953.19404-2-shruthi.sanil@intel.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-06-21phy: ti: dm816x: Fix the error handling path in 'dm816x_usb_phy_probe()Christophe JAILLET1-4/+13
Add an error handling path in the probe to release some resources, as already done in the remove function. Fixes: 609adde838f4 ("phy: Add a driver for dm816x USB PHY") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/ac5136881f6bdec50be19b3bf73b3bc1b15ef1f1.1622898974.git.christophe.jaillet@wanadoo.fr Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-21nvmet: use NVMET_MAX_NAMESPACES to set nn valueChaitanya Kulkarni1-1/+1
For Spec regarding MNAN value:- If the controller supports Asymmetric Namespace Access Reporting, then this field shall be set to a non-zero value that is less than or equal to the NN value. Instead of using subsys->max_nsid that gets calculated dynamically, use NVMET_MAX_NAMESPACES value to report NN. This way we will maintain the MNAN value spec compliant with NN. Without this patch, code results in the following error :- [337976.409142] nvme nvme1: Invalid MNAN value 1024 Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-06-21phy: uniphier-pcie: Fix updating phy parametersKunihiko Hayashi1-4/+7
The current driver uses a value from register TEST_O as the original value for register TEST_I, though, the value is overwritten by "param", so there is a bug that the original value isn't no longer used. The value of TEST_O[7:0] should be masked with "mask", replaced with "param", and placed in the bitfield TESTI_DAT_MASK as new TEST_I value. Fixes: c6d9b1324159 ("phy: socionext: add PCIe PHY driver support") Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/1623037842-19363-1-git-send-email-hayashi.kunihiko@socionext.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-21mtd: spi-nor: remove redundant continue statementColin Ian King1-3/+1
The continue statement at the end of a for-loop has no effect, invert the if expression and remove the continue. Addresses-Coverity: ("Continue has no effect") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Michael Walle <michael@walle.cc> Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
2021-06-21phy/rockchip: add Innosilicon-based CSI dphyHeiko Stuebner3-0/+469
The CSI dphy found for example on the rk3326/px30 and rk3368 is based on an IP design from Innosilicon. Add a driver for it. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Link: https://lore.kernel.org/r/20210610212935.3520341-3-heiko@sntech.de Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-21phy: rockchip: remove redundant initialization of pointer cfgColin Ian King1-2/+2
The pointer cfg is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210609113901.185230-1-colin.king@canonical.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-20PCI: hv: Add check for hyperv_initialized in init_hv_pci_drv()Haiyang Zhang1-0/+3
Add check for hv_is_hyperv_initialized() at the top of init_hv_pci_drv(), so if the pci-hyperv driver is force-loaded on non Hyper-V platforms, the init_hv_pci_drv() will exit immediately, without any side effects, like assignments to hvpci_block_ops, etc. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reported-and-tested-by: Mohammad Alqayeem <mohammad.alqyeem@nutanix.com> Reviewed-by: Wei Liu <wei.liu@kernel.org> Link: https://lore.kernel.org/r/1621984653-1210-1-git-send-email-haiyangz@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2021-06-20rtc: pcf8563: Fix the datasheet URLFabio Estevam1-1/+1
The current datasheet URL is no longer valid. Replace with a valid one. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210603143447.2223353-3-festevam@gmail.com
2021-06-20rtc: pcf85063: Fix the datasheet URLFabio Estevam1-2/+2
The current datasheet URL is no longer valid. Replace with a valid one. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210603143447.2223353-2-festevam@gmail.com
2021-06-20rtc: pcf2127: Fix the datasheet URLFabio Estevam1-1/+1
The current datasheet URL is no longer valid. Replace with a valid one. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210603143447.2223353-1-festevam@gmail.com
2021-06-20i2c: cp2615: check for allocation failure in cp2615_i2c_recv()Dan Carpenter1-4/+10
We need to add a check for if the kzalloc() fails. Fixes: 4a7695429ead ("i2c: cp2615: add i2c driver for Silicon Labs' CP2615 Digital Audio Bridge") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Bence Csókás <bence98@sch.bme.hu> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-06-20EDAC/igen6: fix core dependencyRandy Dunlap1-1/+2
igen6_edac needs mce_register()/unregister() functions, so it should depend on X86_MCE (or X86_MCE_INTEL). That change prevents these build errors: ld: drivers/edac/igen6_edac.o: in function `igen6_remove': igen6_edac.c:(.text+0x494): undefined reference to `mce_unregister_decode_chain' ld: drivers/edac/igen6_edac.o: in function `igen6_probe': igen6_edac.c:(.text+0xf5b): undefined reference to `mce_register_decode_chain' Fixes: 10590a9d4f23e ("EDAC/igen6: Add EDAC driver for Intel client SoCs using IBECC") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Tony Luck <tony.luck@intel.com> Link: https://lore.kernel.org/r/20210619160203.2026-1-rdunlap@infradead.org
2021-06-20i2c: i801: Ensure that SMBHSTSTS_INUSE_STS is cleared when leaving i801_accessHeiner Kallweit1-0/+3
As explained in [0] currently we may leave SMBHSTSTS_INUSE_STS set, thus potentially breaking ACPI/BIOS usage of the SMBUS device. Seems patch [0] needs a little bit more of review effort, therefore I'd suggest to apply a part of it as quick win. Just clearing SMBHSTSTS_INUSE_STS when leaving i801_access() should fix the referenced issue and leaves more time for discussing a more sophisticated locking handling. [0] https://www.spinics.net/lists/linux-i2c/msg51558.html Fixes: 01590f361e94 ("i2c: i801: Instantiate SPD EEPROMs automatically") Suggested-by: Hector Martin <marcan@marcan.st> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Hector Martin <marcan@marcan.st> Reviewed-by: Jean Delvare <jdelvare@suse.de> Tested-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-06-20i2c: i801: Improve i801_setup_hstcfgHeiner Kallweit1-6/+4
i801_setup_hstcfg() leaves the bits in priv->original_hstcfg that we're interested in intact. Therefore we can remove the return value from the function and use priv->original_hstcfg directly. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Tested-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-06-20i2c: i801: Use driver name constant instead of function dev_driver_stringHeiner Kallweit1-5/+5
We are the driver, so we can use the driver name directly instead of retrieving it by calling dev_driver_string(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Tested-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-06-20i2c: i801: Simplify initialization of i2c_board_info in i801_probe_optional_slavesHeiner Kallweit1-4/+4
Why shall we bother to open-code something that the compiler can do for us. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-06-20i2c: i801: Improve status pollingHeiner Kallweit1-23/+13
Polling uses the same timeout as irq mode: 400 * 500us = 200ms = HZ / 5. So let's use the adapter->timeout value also for polling. This has the advantage that userspace can control the timeout value for polling as well. In addition change the code to make it better readable. Last but not least remove the timeout debug messages. Calls to both functions are followed by a call to i801_check_post() that will print an error message in case of timeout. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Tested-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-06-20i2c: cht-wc: Replace of_node by NULLAndy Shevchenko1-2/+1
The driver is run on the platforms where OF node is always NULL. The confusion comes from IRQ domain APIs that take either OF or firmware node as input parameter. Since fwnode is not used here either, replace of_node by NULL. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-06-20i2c: riic: Add RZ/G2L supportBiju Das1-1/+22
RZ/G2L i2c controller is compatible with RZ/A i2c controller. By default IP is in reset state, so need to perform release reset before accessing any register. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-06-20rtc: v3020: remove redundant initialization of variable retvalColin Ian King1-1/+1
The variable retval is being initialized with a value that is never read, it is being updated later on. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210609120050.185746-1-colin.king@canonical.com
2021-06-20rtc: stm32: Fix unbalanced clk_disable_unprepare() on probe error pathMartin Fuzzey1-2/+4
The STM32MP1 RTC may have 2 clocks, the pclk and the rtc_ck. If clk_prepare_enable() fails for the second clock (rtc_ck) we must only call clk_disable_unprepare() for the first clock (pclk) but currently we call it on both leading to a WARN: [ 15.629568] WARNING: CPU: 0 PID: 146 at drivers/clk/clk.c:958 clk_core_disable+0xb0/0xc8 [ 15.637620] ck_rtc already disabled [ 15.663322] CPU: 0 PID: 146 Comm: systemd-udevd Not tainted 5.4.77-pknbsp-svn5759-atag-v5.4.77-204-gea4235203137-dirty #2413 [ 15.674510] Hardware name: STM32 (Device Tree Support) [ 15.679658] [<c0111148>] (unwind_backtrace) from [<c010c0b8>] (show_stack+0x10/0x14) [ 15.687371] [<c010c0b8>] (show_stack) from [<c0ab3d28>] (dump_stack+0xc0/0xe0) [ 15.694574] [<c0ab3d28>] (dump_stack) from [<c012360c>] (__warn+0xc8/0xf0) [ 15.701428] [<c012360c>] (__warn) from [<c0123694>] (warn_slowpath_fmt+0x60/0x94) [ 15.708894] [<c0123694>] (warn_slowpath_fmt) from [<c053b518>] (clk_core_disable+0xb0/0xc8) [ 15.717230] [<c053b518>] (clk_core_disable) from [<c053c190>] (clk_core_disable_lock+0x18/0x24) [ 15.725924] [<c053c190>] (clk_core_disable_lock) from [<bf0adc44>] (stm32_rtc_probe+0x124/0x5e4 [rtc_stm32]) [ 15.735739] [<bf0adc44>] (stm32_rtc_probe [rtc_stm32]) from [<c05f7d4c>] (platform_drv_probe+0x48/0x98) [ 15.745095] [<c05f7d4c>] (platform_drv_probe) from [<c05f5cec>] (really_probe+0x1f0/0x458) [ 15.753338] [<c05f5cec>] (really_probe) from [<c05f61c4>] (driver_probe_device+0x70/0x1c4) [ 15.761584] [<c05f61c4>] (driver_probe_device) from [<c05f6580>] (device_driver_attach+0x58/0x60) [ 15.770439] [<c05f6580>] (device_driver_attach) from [<c05f6654>] (__driver_attach+0xcc/0x170) [ 15.779032] [<c05f6654>] (__driver_attach) from [<c05f40d8>] (bus_for_each_dev+0x58/0x7c) [ 15.787191] [<c05f40d8>] (bus_for_each_dev) from [<c05f4ffc>] (bus_add_driver+0xdc/0x1f8) [ 15.795352] [<c05f4ffc>] (bus_add_driver) from [<c05f6ed8>] (driver_register+0x7c/0x110) [ 15.803425] [<c05f6ed8>] (driver_register) from [<c01027bc>] (do_one_initcall+0x70/0x1b8) [ 15.811588] [<c01027bc>] (do_one_initcall) from [<c01a1094>] (do_init_module+0x58/0x1f8) [ 15.819660] [<c01a1094>] (do_init_module) from [<c01a0074>] (load_module+0x1e58/0x23c8) [ 15.827646] [<c01a0074>] (load_module) from [<c01a0860>] (sys_finit_module+0xa0/0xd4) [ 15.835459] [<c01a0860>] (sys_finit_module) from [<c01011e0>] (__sys_trace_return+0x0/0x20) Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group> Fixes: 4e64350f42e2 ("rtc: add STM32 RTC driver") Cc: stable@vger.kernel.org Reviewed-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/1623087421-19722-1-git-send-email-martin.fuzzey@flowbird.group
2021-06-20rtc: bd70528: Drop BD70528 supportMatti Vaittinen2-309/+14
The only known BD70528 use-cases are such that the PMIC is controlled from separate MCU which is not running Linux. I am not aware of any Linux driver users. Furthermore, it seems there is no demand for this IC. Let's ease the maintenance burden and drop the driver. We can always add it back if there is sudden need for it. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210527105819.GA3111334@localhost.localdomain
2021-06-20rtc: max77686: Do not enforce (incorrect) interrupt trigger typeKrzysztof Kozlowski1-2/+2
Interrupt line can be configured on different hardware in different way, even inverted. Therefore driver should not enforce specific trigger type - edge falling - but instead rely on Devicetree to configure it. The Maxim 77686 datasheet describes the interrupt line as active low with a requirement of acknowledge from the CPU therefore the edge falling is not correct. The interrupt line is shared between PMIC and RTC driver, so using level sensitive interrupt is here especially important to avoid races. With an edge configuration in case if first PMIC signals interrupt followed shortly after by the RTC, the interrupt might not be yet cleared/acked thus the second one would not be noticed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210526172036.183223-6-krzysztof.kozlowski@canonical.com
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.