aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2021-06-15octeontx2-af: cn10k: Bandwidth profiles config supportSunil Goutham6-4/+757
CN10K silicons supports hierarchial ingress packet ratelimiting. There are 3 levels of profilers supported leaf, mid and top. Ratelimiting is done after packet forwarding decision is taken and a NIXLF's RQ is identified to DMA the packet. RQ's context points to a leaf bandwidth profile which can be configured to achieve desired ratelimit. This patch adds logic for management of these bandwidth profiles ie profile alloc, free, context update etc. Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-15net: pci200syn: fix the comments style issuePeng Li1-2/+1
Networking block comments don't use an empty /* line, use /* Comment... This patch fixes the comments style issues. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-15net: pci200syn: add necessary () to macro argumentPeng Li1-1/+1
Macro argument 'card' may be better as '(card)' to avoid precedence issues. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-15net: pci200syn: add some required spacesPeng Li1-8/+8
Add spaces required after that close brace '}'. Add spaces required before the open parenthesis '('. Add spaces required after that ','. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-15net: pci200syn: replace comparison to NULL with "!card"Peng Li1-4/+2
According to the chackpatch.pl, comparison to NULL could be written "!card". Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-15net: pci200syn: add blank line after declarationsPeng Li1-1/+3
This patch fixes the checkpatch error about missing a blank line after declarations. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-15net: pci200syn: remove redundant blank linesPeng Li1-20/+0
This patch removes some redundant blank lines. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-15ptp: improve max_adj check against unreasonable valuesJakub Kicinski1-3/+3
Scaled PPM conversion to PPB may (on 64bit systems) result in a value larger than s32 can hold (freq/scaled_ppm is a long). This means the kernel will not correctly reject unreasonably high ->freq values (e.g. > 4294967295ppb, 281474976645 scaled PPM). The conversion is equivalent to a division by ~66 (65.536), so the value of ppb is always smaller than ppm, but not small enough to assume narrowing the type from long -> s32 is okay. Note that reasonable user space (e.g. ptp4l) will not use such high values, anyway, 4289046510ppb ~= 4.3x, so the fix is somewhat pedantic. Fixes: d39a743511cd ("ptp: validate the requested frequency adjustment.") Fixes: d94ba80ebbea ("ptp: Added a brand new class driver for ptp clocks.") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-15net: z85230: remove unnecessary out of memory messagePeng Li1-3/+2
This patch removes unnecessary out of memory message, to fix the following checkpatch.pl warning: "WARNING: Possible unnecessary 'out of memory' message" Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-15net: z85230: fix the code style issue about open brace {Peng Li1-72/+36
This patch fixes the code style issue according to checkpatch.pl error: "ERROR: that open brace { should be on the previous line". Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-15net: z85230: add some required spacesPeng Li1-207/+209
Add space required before the open parenthesis '(' and '{'. Add space required after that close brace '}' and ',' Add spaces required around that '=' , '&', '*', '|', '+', '/' and '-'. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-15net: z85230: remove trailing whitespacesPeng Li1-119/+105
This patch removes trailing whitespaces. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-15net: z85230: fix the code style issue about "if..else.."Peng Li1-16/+8
According to the chackpatch.pl, else should follow close brace '}', braces {} should be used on all arms of this statement. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-15net: z85230: fix the comments style issuePeng Li1-131/+83
Networking block comments don't use an empty /* line, use /* Comment... Block comments use * on subsequent lines. Block comments use a trailing */ on a separate line. This patch fixes the comments style issues. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-15net: z85230: replace comparison to NULL with "!skb"Peng Li1-7/+7
According to the chackpatch.pl, comparison to NULL could be written "!skb". Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-15net: z85230: fix the code style issue about EXPORT_SYMBOL(foo)Peng Li1-18/+0
According to the chackpatch.pl, EXPORT_SYMBOL(foo); should immediately follow its function/variable. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-15net: z85230: add blank line after declarationsPeng Li1-0/+6
This patch fixes the checkpatch error about missing a blank line after declarations. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-15net: z85230: remove redundant blank linesPeng Li1-33/+1
This patch removes some redundant blank lines. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-15mtd: spi-nor: add initial sysfs supportMichael Walle4-1/+97
Add support to show the manufacturer, the partname and JEDEC identifier as well as to dump the SFDP table. Not all flashes list their SFDP table contents in their datasheet. So having that is useful. It might also be helpful in bug reports from users. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
2021-06-15mtd: spi-nor: sfdp: save a copy of the SFDP dataMichael Walle2-0/+68
Due to possible mode switching to 8D-8D-8D, it might not be possible to read the SFDP after the initial probe. To be able to dump the SFDP via sysfs afterwards, make a complete copy of it. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Tested-by: Heiko Thiery <heiko.thiery@gmail.com> Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
2021-06-15stmmac: align RX buffersMatteo Croce1-2/+2
On RX an SKB is allocated and the received buffer is copied into it. But on some architectures, the memcpy() needs the source and destination buffers to have the same alignment to be efficient. This is not our case, because SKB data pointer is misaligned by two bytes to compensate the ethernet header. Align the RX buffer the same way as the SKB one, so the copy is faster. An iperf3 RX test gives a decent improvement on a RISC-V machine: before: [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 733 MBytes 615 Mbits/sec 88 sender [ 5] 0.00-10.01 sec 730 MBytes 612 Mbits/sec receiver after: [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 1.10 GBytes 942 Mbits/sec 0 sender [ 5] 0.00-10.00 sec 1.09 GBytes 940 Mbits/sec receiver And the memcpy() overhead during the RX drops dramatically. before: Overhead Shared O Symbol 43.35% [kernel] [k] memcpy 33.77% [kernel] [k] __asm_copy_to_user 3.64% [kernel] [k] sifive_l2_flush64_range after: Overhead Shared O Symbol 45.40% [kernel] [k] __asm_copy_to_user 28.09% [kernel] [k] memcpy 4.27% [kernel] [k] sifive_l2_flush64_range Signed-off-by: Matteo Croce <mcroce@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-15Merge tag 'arm-ffa-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/driversOlof Johansson8-0/+1040
Arm Firmware Framework for ARMv8-A(FFA) interface driver The Arm FFA specification describes a software architecture to leverages the virtualization extension to isolate software images provided by an ecosystem of vendors from each other and describes interfaces that standardize communication between the various software images including communication between images in the Secure world and Normal world. Any Hypervisor could use the FFA interfaces to enable communication between VMs it manages. The Hypervisor a.k.a Partition managers in FFA terminology can assign system resources(Memory regions, Devices, CPU cycles) to the partitions and manage isolation amongst them. This is the initial and minimal support for the FFA interface to enable communication between secure partitions and the normal world OS. * tag 'arm-ffa-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: firmware: arm_ffa: Add support for MEM_* interfaces firmware: arm_ffa: Setup in-kernel users of FFA partitions firmware: arm_ffa: Add support for SMCCC as transport to FFA driver firmware: arm_ffa: Add initial Arm FFA driver support firmware: arm_ffa: Add initial FFA bus support for device enumeration arm64: smccc: Add support for SMCCCv1.2 extended input/output registers Link: https://lore.kernel.org/r/20210601095838.GA838783@bogus Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-15Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo33-132/+1046
ath.git patches for v5.14. Major changes: ath11k * support for WCN6855 PCI hardware wcn36xx * WoWLAN support with magic packets and GTK rekeying
2021-06-15regulator: mt6315: Fix checking return value of devm_regmap_init_spmi_extAxel Lin1-2/+2
devm_regmap_init_spmi_ext() returns ERR_PTR() on error. Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20210615132934.3453965-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-15regulator: sy7636a: Initial commitAlistair Francis3-0/+134
Initial support for the Silergy SY7636A-regulator Power Management chip. Signed-off-by: Alistair Francis <alistair@alistair23.me> Link: https://lore.kernel.org/r/20210615103400.946-3-alistair@alistair23.me Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-15Merge tag 'tegra-for-5.14-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/driversOlof Johansson4-3/+6
firmware: tegra: Changes for v5.14-rc1 These changes contain two minor fixes for the Tegra BPMP driver. * tag 'tegra-for-5.14-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: firmware: tegra: bpmp: Fix Tegra234-only builds firmware: tegra: Fix error return code in tegra210_bpmp_init() Link: https://lore.kernel.org/r/20210611164437.3568059-3-thierry.reding@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-15Merge tag 'tegra-for-5.14-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/socOlof Johansson8-9/+453
soc/tegra: Changes for v5.14-rc1 These changes implement the core power domain for the PMC, and fix a couple of minor issues as well as add stubs to help some drivers be compile tested more easily. * tag 'tegra-for-5.14-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: soc/tegra: fuse: Fix Tegra234-only builds soc/tegra: fuse: Don't return -ENOMEM when allocate lookups failed soc/tegra: regulators: Support core domain state syncing soc/tegra: pmc: Add driver state syncing soc/tegra: pmc: Add core power domain soc/tegra: fuse: Add stubs needed for compile-testing soc/tegra: Add devm_tegra_core_dev_init_opp_table() soc/tegra: Add stub for soc_is_tegra() soc/tegra: regulators: Bump voltages on system reboot regulator: core: Add regulator_sync_voltage_rdev() Link: https://lore.kernel.org/r/20210611164437.3568059-2-thierry.reding@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-15mmc: sdhci-iproc: Add support for the legacy sdhci controller on the BCM7211Al Cooper3-1/+33
Add support for the legacy Arasan sdhci controller on the BCM7211 and related SoC's. This includes adding a .shutdown callback to increase the power savings during S5. Signed-off-by: Al Cooper <alcooperx@gmail.com> Link: https://lore.kernel.org/r/20210602192758.38735-2-alcooperx@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-15Merge branch 'fixes' into nextUlf Hansson1-5/+45
2021-06-15Merge tag 'qcom-drivers-for-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/driversOlof Johansson6-8/+100
Qualcomm driver updates for v5.14 In addition to fixing a kerneldoc issue in the qcom-ebi2 driver this populates socinfo with a range of platforms and PMICs and extends a few of the Qualcomm drivers bits of support for MSM8226, MDM9607, SM6125 and SC8180X. * tag 'qcom-drivers-for-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: firmware: qcom_scm: Add MDM9607 compatible soc: qcom: rpmpd: Add MDM9607 RPM Power Domains soc: qcom: smd-rpm: Add MSM8226 compatible dt-bindings: soc: qcom: smd-rpm: Add MSM8226 compatible soc: qcom: socinfo: import PMIC IDs from pmic-spmi bus: qcom-ebi2: Fix incorrect documentation for '{slow,fast}_cfg' soc: qcom: socinfo: Add more IDs soc: qcom: rpmhpd: Add SC8180X dt-bindings: power: rpmpd: Add SC8180X to rpmpd binding dt-bindings: soc: qcom: smd-rpm: Document SM6125 compatible soc: qcom: smd-rpm: Add SM6125 compatible soc: qcom: socinfo: Add remaining IPQ6018 family ID-s soc: qcom: socinfo: Add missing SoC ID for SM6125 Link: https://lore.kernel.org/r/20210614223727.393159-1-bjorn.andersson@linaro.org Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-15devres: Enable trace eventsAndy Shevchenko4-27/+89
In some cases the printf() mechanism is too heavy and can't be used. For example, when debugging a race condition involving devres API. When CONFIG_DEBUG_DEVRES is enabled I can't reproduce an issue, and otherwise it's quite visible with a useful information being collected. Enable trace events for devres part of the driver core. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210517122946.53161-4-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-15devres: No need to call remove_nodes() when there none presentAndy Shevchenko1-0/+4
If a list of devres nodes is empty, no need to call remove_nodes(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210517122946.53161-3-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-15devres: Use list_for_each_safe_from() in remove_nodes()Andy Shevchenko1-16/+8
The remove_nodes() open codes the list_for_each_safe_from(). Replace it by a generic macro. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210517122946.53161-2-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-15devres: Make locking straight forward in release_nodes()Andy Shevchenko1-15/+15
It seems for the sake of saving stack memory of couple of pointers, the locking in release_nodes() callers becomes interesting. Replace this logic with a straight forward locking and unlocking scheme. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210517122946.53161-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-15mei: hdcp: SPDX tag should be the first lineTom Rix1-1/+0
checkpatch looks for the tag on the first line. So delete empty first line Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20210610214438.3161140-4-trix@redhat.com Acked-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-15Merge tag 'imx-soc-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/socOlof Johansson1-0/+3
i.MX SoC changes for 5.14: - Add SMP support for i.MX7D, as there are i.MX7D devices running in field with U-Boot that doesn't support PSCI. - Fix imx5_cpu_suspend_info reference in i.MX5 PM code comments. - Add SoC ID initialization for i.MX50. - Drop unnecessary of_platform_default_populate() call from i.MX6Q .init_machine hook. - A series from Oleksij Rempel to remove most of the i.MX6/7 board specific PHY fixups. * tag 'imx-soc-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx: add smp support for imx7d ARM: imx6q: drop of_platform_default_populate() from init_machine ARM: imx7d: remove Atheros AR8031 PHY fixup ARM: imx6sx: remove Atheros AR8031 PHY fixup ARM: imx6q: remove Atheros AR8035 SmartEEE fixup ARM: imx6q: remove clk-out fixup for the Atheros AR8031 and AR8035 PHYs ARM: imx6q: remove BMCR_PDOWN handler in ar8035_phy_fixup() ARM: imx6q: remove part of ar8031_phy_fixup() ARM: imx6q: remove PHY fixup for KSZ9031 ARM: imx: Initialize SoC ID on i.MX50 ARM: imx: pm-imx5: Fix references to imx5_cpu_suspend_info Link: https://lore.kernel.org/r/20210613082544.16067-2-shawnguo@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-15Merge tag 'imx-drivers-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/driversOlof Johansson1-109/+513
i.MX drivers update for 5.14: - A patch series from Lucas Stach and Peng Fan adding i.MX8MM power domains support into i.MX GPCv2 driver. - A couple of patches from Adam Ford adding i.MX8MN power domains on top of i.MX8MM power domain support. * tag 'imx-drivers-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx: gpcv2: add support for i.MX8MN power domains dt-bindings: add defines for i.MX8MN power domains soc: imx: gpcv2: move reset assert after requesting domain power up soc: imx: gpcv2: Add support for missing i.MX8MM VPU/DISPMIX power domains soc: imx: gpcv2: add support for i.MX8MM power domains dt-bindings: power: add defines for i.MX8MM power domains soc: imx: gpcv2: add support for optional resets soc: imx: gpcv2: allow domains without power-sequence control soc: imx: gpcv2: add runtime PM support for power-domains soc: imx: gpcv2: wait for ADB400 handshake soc: imx: gpcv2: split power up and power down sequence control soc: imx: gpcv2: switch to clk_bulk_* API soc: imx: gpcv2: move domain mapping to domain driver probe soc: imx: gpcv2: move to more ideomatic error handling in probe Link: https://lore.kernel.org/r/20210613082544.16067-1-shawnguo@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-15firewire: nosy: switch from 'pci_' to 'dma_' APIChristophe JAILLET1-19/+24
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'add_card()', GFP_KERNEL can be used because this flag is already used a few lines above and no lock is taken in the between. While at it, also remove some useless casting. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/e1d7fa558f31abf294659a9d4edcc1e4fc065fab.1623590706.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-15accessibility: braille: braille_console: fix whitespace style issuesClayton Casciato1-0/+3
Fixed a coding style issue. Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Clayton Casciato <majortomtosourcecontrol@gmail.com> Link: https://lore.kernel.org/r/20210613203031.23721-1-majortomtosourcecontrol@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-15Merge tag 'drivers_soc_for_5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into arm/driversOlof Johansson2-6/+2
SOC: Keystone driver update for v5.13 Couple of cleanup fixes in PM AVS and WKUP M3 drivers * tag 'drivers_soc_for_5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: soc: ti: wkup_m3_ipc: Remove redundant error printing in wkup_m3_ipc_probe() PM: AVS: remove redundant dev_err call in omap_sr_probe() Link: https://lore.kernel.org/r/1623564105-10273-1-git-send-email-santosh.shilimkar@oracle.com Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-15speakup: Separate out translations for bright colors namesSamuel Thibault3-5/+15
The existing code was assuming that bright color names can be forged by just prepending the "bright" word to the color name. But some langages may rather append it, or require completely different names ("grey" is actually already an example). From: Trevor Astrope <astrope@tabbweb.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Link: https://lore.kernel.org/r/20210613195909.n7ssor6iqeo3pcno@begin Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-15wil6210: remove erroneous wiphy lockingJohannes Berg1-2/+0
We already hold the wiphy lock in all cases when we get here, so this would deadlock, remove the erroneous locking. Fixes: a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210426212929.83f1de07c2cd.I630a2a00eff185ba0452324b3d3f645e01128a95@changeid
2021-06-15ath6kl: Fix inconsistent indentingJiapeng Chong1-2/+2
Eliminate the follow smatch warning: drivers/net/wireless/ath/ath6kl/cfg80211.c:3308 ath6kl_cfg80211_sscan_start() warn: inconsistent indenting. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1622026376-68524-1-git-send-email-jiapeng.chong@linux.alibaba.com
2021-06-15ath11k: send beacon template after vdev_start/restart during csaSeevalamuthu Mariappan1-5/+5
Firmware has added assert if beacon template is received after vdev_down. Firmware expects beacon template after vdev_start and before vdev_up. This change is needed to support MBSSID EMA cases in firmware. Hence, Change the sequence in ath11k as expected from firmware. This new change is not causing any issues with older firmware. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1.r3-00011-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1.r4-00008-QCAHKSWPL_SILICONZ-1 Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Signed-off-by: Seevalamuthu Mariappan <seevalam@codeaurora.org> [sven@narfation.org: added tested-on/fixes information] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210525133028.2805615-1-sven@narfation.org
2021-06-15ath10k: Use devm_platform_get_and_ioremap_resource()Yang Yingliang1-8/+1
Use devm_platform_get_and_ioremap_resource() to simplify code. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210605110227.2429420-1-yangyingliang@huawei.com
2021-06-15ath10k: remove the repeated declarationShaokun Zhang2-2/+0
Functions 'ath10k_pci_free_pipes' and 'ath10k_wmi_alloc_skb' are declared twice in their header file, so remove the repeated declaration. Cc: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1622448459-50805-1-git-send-email-zhangshaokun@hisilicon.com
2021-06-15ath10k: Fix an error code in ath10k_add_interface()Yang Li1-0/+1
When the code execute this if statement, the value of ret is 0. However, we can see from the ath10k_warn() log that the value of ret should be -EINVAL. Clean up smatch warning: drivers/net/wireless/ath/ath10k/mac.c:5596 ath10k_add_interface() warn: missing error code 'ret' Reported-by: Abaci Robot <abaci@linux.alibaba.com> Fixes: ccec9038c721 ("ath10k: enable raw encap mode and software crypto engine") Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1621939577-62218-1-git-send-email-yang.lee@linux.alibaba.com
2021-06-15ath11k: Fix an error handling path in ath11k_core_fetch_board_data_api_n()Christophe JAILLET1-1/+2
All error paths but this one 'goto err' in order to release some resources. Fix this. Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/e959eb544f3cb04258507d8e25a6f12eab126bde.1621676864.git.christophe.jaillet@wanadoo.fr
2021-06-15wil6210: Fix wrong function name in commentsYang Shen2-4/+4
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/ath/wil6210/interrupt.c:28: warning: expecting prototype for Theory of operation(). Prototype was for WIL6210_IRQ_DISABLE() instead drivers/net/wireless/ath/wil6210/wmi.c:227: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/net/wireless/ath/wil6210/wmi.c:245: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/net/wireless/ath/wil6210/wmi.c:263: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Cc: Maya Erez <merez@codeaurora.org> Signed-off-by: Yang Shen <shenyang39@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210517050141.61488-4-shenyang39@huawei.com
2021-06-15ath: Fix wrong function name in commentsYang Shen1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/ath/hw.c:119: warning: expecting prototype for ath_hw_set_bssid_mask(). Prototype was for ath_hw_setbssidmask() instead Signed-off-by: Yang Shen <shenyang39@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210517050141.61488-3-shenyang39@huawei.com
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.