| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add his_entry to the reg offsets struct.
This will allow different products to have a different reg offset for this
particular module.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add support for version register and print it at probe time.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The DMA submodule is a part of the atmel-isc pipeline, and stands for
Direct Memory Access. It acts like a master on the AXI bus of the SoC, and
can directly write the RAM area with the pixel data from the ISC internal
sram.
Add dma to the reg offsets struct.
This will allow different products to have a different reg offset for this
particular module.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The HIS submodule is a part of the atmel-isc pipeline, and stands for
Histogram. This module performs a color histogram that can be read and used
by the main processor.
Add his to the reg offsets struct.
This will allow different products to have a different reg offset for this
particular module.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The RLP submodule is a part of the atmel-isc pipeline, and stands for
Rounding,Limiting and Packaging. It used to extract specific data from the
ISC pipeline. For example if we want to output greyscale 8 bit, we would
use limiting to 8 bits, and packaging to Luma component only.
Add rlp to the reg offsets struct.
This will allow different products to have a different reg offset for this
particular module.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The SUB submodules are a part of the atmel-isc pipeline, and stand for
Subsampling. They are used to subsample the original YUV 4:4:4 pixel ratio
aspect to either 4:2:2 or 4:2:0.
Add sub420 and sub422 to the reg offsets struct.
This will allow different products to have a different reg offset for these
particular modules.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The CBC submodule is a part of the atmel-isc pipeline, and stands for
Contrast Brightness Control. It is used to apply gains and offsets to the
luma (Y) and chroma (U, V) components of the YUV elements.
Add cbc to the reg offsets struct. This will allow different products
to have a different reg offset for this particular module.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The CBC submodule is a part of the atmel-isc pipeline, and stands for
Contrast Brightness Control. It is used to apply gains and offsets to the
luma (Y) and chroma (U, V) components of the YUV elements.
The CBC submodule should be initialized in the product specific driver
as it's product specific. Other products can implement it differently
[hverkuil: made isc_sama5d2_config_cbc static]
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Create a struct that holds register offsets that are product specific.
Add initially the CSC register.
This allows each product that contains a variant of the ISC to add their
own register offset.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add the clock id to the debug message regarding clock setup
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The CSC submodule is a part of the atmel-isc pipeline, and stands for
Color Space Conversion. It is used to apply a matrix transformation to
RGB pixels to convert them to the YUV components.
The CSC submodule should be initialized in the product specific driver
as it's product specific. Other products can implement it differently.
[hverkuil: made isc_sama5d2_config_csc static]
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The dma configuration (DCFG) is specific to the product.
Move this configuration in the product specific driver, and add the
field inside the driver struct.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Implement a ->probe_finalize() callback that can be used by vendor
implementations to perform extra programming necessary after devices
have been attached to the SMMU.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210603164632.1000458-4-thierry.reding@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Fix checkpatch.pl --strict -f drivers/gpu/drm/bridge/ti-sn65dsi83.c
CHECKs, no functional change. This is the same modification done
to V7 of the original patch.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Adam Ford <aford173@gmail.com>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Frieder Schrempf <frieder.schrempf@kontron.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Loic Poulain <loic.poulain@linaro.org>
Cc: Marek Vasut <marex@denx.de>
Cc: Philippe Schenker <philippe.schenker@toradex.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Valentin Raevsky <valentin@compulab.co.il>
To: dri-devel@lists.freedesktop.org
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210608095322.23644-1-marex@denx.de
|
|
Move the max width and max height constants to the product specific driver
and have them in the device struct.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
When calling the subdev, certain subdev drivers will overwrite the
frame size and adding sizes which are beyond the ISC's capabilities.
Thus we need to ensure the frame size is cropped to the maximum caps.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The driver name constant must defined based on product driver, thus moving
the constant directly where it's required. This will allow each ISC based
product to define it's own name.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Separate the gamma table from the isc base file into the specific sama5d2
product file.
Add a pointer to the gamma table and entries count inside the platform
driver specific struct.
[hverkuil: made isc_sama5d2_gamma_table static]
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Use the new vb2_queue_change_type() function in .vidioc_reqbufs and
.vidioc_create_bufs instead of changing the queue type manually in
vidioc_s_fmt_vbi_cap() and vidioc_s_fmt_sliced_vbi_cap().
This allows for a more consistent behavior, as .vidioc_reqbufs and
.vidioc_create_bufs are when the queue will become "busy".
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Vivid tracks the VBI capture mode in vivid_dev->stream_sliced_vbi_cap
field. We can just look at the buffer type instead, and drop the field.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
On some platforms a video device can capture either video data or
metadata. The driver can implement vidioc functions for both video and
metadata, and use a single vb2_queue for the buffers. However, vb2_queue
requires choosing a single buffer type, which conflicts with the idea of
capturing either video or metadata.
The buffer type of vb2_queue can be changed, but it's not obvious how
this should be done in the drivers. To help this, add a new helper
function vb2_queue_change_type() which ensures the correct checks and
documents how it can be used.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Fix checkpatch warning in arm-smmu-v3.c:
static const char * array should probably be static const char * const
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The hookup with qcom_smmu_impl is required to do ACPI boot on SC8180X
based devices like Lenovo Flex 5G laptop and Microsoft Surface Pro X.
Define acpi_platform_list for these platforms and match them using
acpi_match_platform_list() call, and create qcom_smmu_impl accordingly.
(np == NULL) is used to check ACPI boot, because fwnode of SMMU device
is a static allocation and thus helpers like has_acpi_companion() don't
work here.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210509022607.17534-1-shawn.guo@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
We discussed if that is really the right approach for quite a while now, but
digging deeper into a bug report on arm turned out that this is actually
horrible broken right now.
The reason for this is that vmf_insert_mixed_prot() always tries to grab
a reference to the underlaying page on architectures without
ARCH_HAS_PTE_SPECIAL and as far as I can see also enabled GUP.
So nuke using VM_MIXEDMAP here and use VM_PFNMAP instead.
Also make sure to reject mappings without VM_SHARED.
v2: reject COW mappings, merge function with only caller
v3: adjust comment as suggested by Thomas
Signed-off-by: Christian König <christian.koenig@amd.com>
Bugs: https://gitlab.freedesktop.org/drm/amd/-/issues/1606#note_936174
Link: https://patchwork.freedesktop.org/patch/msgid/20210607135830.8574-1-christian.koenig@amd.com
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Add driver for TI SN65DSI83 Single-link DSI to Single-link LVDS bridge
and TI SN65DSI84 Single-link DSI to Dual-link or 2x Single-link LVDS
bridge. TI SN65DSI85 is unsupported due to lack of hardware to test on,
but easy to add.
The driver operates the chip via I2C bus. Currently the LVDS clock are
always derived from DSI clock lane, which is the usual mode of operation.
Support for clock from external oscillator is not implemented, but it is
easy to add if ever needed. Only RGB888 pixel format is implemented, the
LVDS666 is not supported, but could be added if needed.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Tested-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Loic Poulain <loic.poulain@linaro.org>
Cc: Philippe Schenker <philippe.schenker@toradex.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Valentin Raevsky <valentin@compulab.co.il>
To: dri-devel@lists.freedesktop.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210607174258.16300-2-marex@denx.de
|
|
We need to make sure to allocate the sys_mem resource before the point
of no return.
v2: add missing return value checking, also handle idle case
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210608081931.11339-1-christian.koenig@amd.com
|
|
Since devman_upiu_cmd() is not COMMAND UPIU, and doesn't have CDB, it is
better to use UPIU query trace, which provides more helpful information for
issue troubleshooting.
Link: https://lore.kernel.org/r/20210531104308.391842-5-huobean@gmail.com
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
For the query request, we already have query_trace, but in
ufshcd_send_command(), there will add two more redundant traces. Since
lrbp->cmd is NULL in the query request, the two trace events below provide
nothing except the tag and DB. Instead of letting them take up the limited
trace ring buffer, it’s better not to print these traces in case of cmd ==
NULL.
ufshcd_command: send_req: ff3b0000.ufs: tag: 28, DB: 0x0, size: -1, IS: 0, LBA: 18446744073709551615, opcode: 0x0 (0x0), group_id: 0x0
ufshcd_command: dev_complete: ff3b0000.ufs: tag: 28, DB: 0x0, size: -1, IS: 0, LBA: 18446744073709551615, opcode: 0x0 (0x0), group_id: 0x0
Link: https://lore.kernel.org/r/20210531104308.391842-4-huobean@gmail.com
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The current UPIU completion event trace still prints the COMMAND UPIU
header, rather than the RSP UPIU header. This makes UPIU command trace
useless in problem shooting in case we receive a trace log from the
customer/field.
There are two important fields in RSP UPIU:
1. The response field, which indicates the UFS defined overall success or
failure of the series of Command, Data and RESPONSE UPIU’s that make up
the execution of a task.
2. The Status field, which contains the command set specific status for a
specific command issued by the initiator device.
Before this commit, the UPIU paired trace events:
ufshcd_upiu: send_req: fe3b0000.ufs: HDR:01 20 00 1c 00 00 00 00 00 00 00 00, CDB:3b e1 00 00 00 00 00 00 30 00 00 00 00 00 00 00
ufshcd_upiu: complete_rsp: fe3b0000.ufs: HDR:01 20 00 1c 00 00 00 00 00 00 00 00, CDB:3b e1 00 00 00 00 00 00 30 00 00 00 00 00 00 00
After this commit:
ufshcd_upiu: send_req: fe3b0000.ufs: HDR:01 20 00 1c 00 00 00 00 00 00 00 00, CDB:3b e1 00 00 00 00 00 00 30 00 00 00 00 00 00 00
ufshcd_upiu: complete_rsp: fe3b0000.ufs: HDR:21 00 00 1c 00 00 00 00 00 00 00 00, CDB:3b e1 00 00 00 00 00 00 30 00 00 00 00 00 00 00
Link: https://lore.kernel.org/r/20210531104308.391842-3-huobean@gmail.com
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
To consistent with trace event print, convert the value of the variable
'lba' from a block layer sector address to a logical block adress.
Link: https://lore.kernel.org/r/20210531104308.391842-2-huobean@gmail.com
Suggested-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Remove repeated word "for" in comment.
Link: https://lore.kernel.org/r/1891546521.01622777101796.JavaMail.epsvc@epcpadp3
Signed-off-by: Keoseong Park <keosung.park@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In preparation to enable -Wimplicit-fallthrough for Clang, fix a
fall-through warning by explicitly adding a break statement instead of just
letting the code fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Link: https://lore.kernel.org/r/20210604023530.GA180997@embeddedor
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In preparation to enable -Wimplicit-fallthrough for Clang, fix a
fall-through warning by replacing a /* fallthrough */ comment with the new
pseudo-keyword macro fallthrough;
Link: https://github.com/KSPP/linux/issues/115
Link: https://lore.kernel.org/r/20210604022752.GA168289@embeddedor
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
By reading the UTP Transfer Request List Completion Notification Register,
which is added in UFSHCI Ver 3.0, SW can easily get the compeleted transfer
requests. Thus, SW can get rid of host lock, which is used to synchronize
the tr_doorbell and outstanding_reqs, on transfer requests dispatch and
completion paths. This can further benefit random read/write performance.
Link: https://lore.kernel.org/r/1621845419-14194-4-git-send-email-cang@codeaurora.org
Cc: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Co-developed-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Current UFS IRQ handler is completely wrapped by host lock, and because
ufshcd_send_command() is also protected by host lock, when IRQ handler
fires, not only the CPU running the IRQ handler cannot send new requests,
the rest CPUs can neither. Move the host lock wrapping the IRQ handler into
specific branches, i.e., ufshcd_uic_cmd_compl(), ufshcd_check_errors(),
ufshcd_tmc_handler() and ufshcd_transfer_req_compl(). Meanwhile, to further
reduce occpuation of host lock in ufshcd_transfer_req_compl(), host lock is
no longer required to call __ufshcd_transfer_req_compl(). As per test, the
optimization can bring considerable gain to random read/write performance.
Link: https://lore.kernel.org/r/1621845419-14194-3-git-send-email-cang@codeaurora.org
Cc: Stanley Chu <stanley.chu@mediatek.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Co-developed-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
ufshcd_host_reset_and_restore() anyways completes all pending requests
before starts re-probing, so there is no need to complete the command on
the highest bit in tr_doorbell in advance.
Link: https://lore.kernel.org/r/1621845419-14194-2-git-send-email-cang@codeaurora.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
get_device(shost->shost_gendev.parent) is called after host state has
switched to SHOST_RUNNING. scsi_host_dev_release() shouldn't release the
parent device if host state is still SHOST_CREATED.
Link: https://lore.kernel.org/r/20210602133029.2864069-5-ming.lei@redhat.com
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Hannes Reinecke <hare@suse.de>
Tested-by: John Garry <john.garry@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
scsi_host_dev_release() only frees dev_name when host state is
SHOST_CREATED. After host state has changed to SHOST_RUNNING,
scsi_host_dev_release() no longer cleans up.
Fix this by doing a put_device(&shost->shost_dev) in the failure path when
host state is SHOST_RUNNING. Move get_device(&shost->shost_gendev) before
device_add(&shost->shost_dev) so that scsi_host_cls_release() can do a put
on this reference.
Link: https://lore.kernel.org/r/20210602133029.2864069-4-ming.lei@redhat.com
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Hannes Reinecke <hare@suse.de>
Reported-by: John Garry <john.garry@huawei.com>
Tested-by: John Garry <john.garry@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When scsi_add_host_with_dma() returns failure, the caller will call
scsi_host_put(shost) to release everything allocated for this host
instance. Consequently we can't also free allocated stuff in
scsi_add_host_with_dma(), otherwise we will end up with a double free.
Strictly speaking, host resource allocations should have been done in
scsi_host_alloc(). However, the allocations may need information which is
not yet provided by the driver when that function is called. So leave the
allocations where they are but rely on host device's release handler to
free resources.
Link: https://lore.kernel.org/r/20210602133029.2864069-3-ming.lei@redhat.com
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Hannes Reinecke <hare@suse.de>
Tested-by: John Garry <john.garry@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
After device is initialized via device_initialize(), or its name is set via
dev_set_name(), the device has to be freed via put_device(). Otherwise
device name will be leaked because it is allocated dynamically in
dev_set_name().
Fix the leak by replacing kfree() with put_device(). Since
scsi_host_dev_release() properly handles IDA and kthread removal, remove
special-casing these from the error handling as well.
Link: https://lore.kernel.org/r/20210602133029.2864069-2-ming.lei@redhat.com
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Hannes Reinecke <hare@suse.de>
Tested-by: John Garry <john.garry@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The "retval" variable needs to be signed for the error handling to work.
Link: https://lore.kernel.org/r/YLjMEAFNxOas1mIp@mwanda
Fixes: 7e26e3ea0287 ("scsi: scsi_dh_alua: Check for negative result value")
Reviewed-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Remove all references to the description of __ufshcd_wl_{suspend,resume} as
no such description exist.
Fixes: b294ff3e3449 (scsi: ufs: core: Enable power management for wlun)
Link: https://lore.kernel.org/r/20210603122209.635799-1-avri.altman@wdc.com
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy() avoid using an inline const buffer
argument and instead just statically initialize the destination array
directly.
Link: https://lore.kernel.org/r/20210602180000.3326448-1-keescook@chromium.org
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
host->max_id defines the maximum target id that the SCSI midlayer will
attempt to manually scan. The default is 8. Update the value to the max
sessions the driver supports.
[mkp: applied by hand]
Link: https://lore.kernel.org/r/20210602104653.17278-1-jhasan@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
There is a typo in the returned error code sign from irdma_modify_qp()
when the attr_mask is not supported - Fix it.
Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs")
Link: https://lore.kernel.org/r/20210607221543.254144-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
There is a spelling mistake in a literal string. Fix it.
Link: https://lore.kernel.org/r/20210607113345.82206-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The variable val is being initialized with a value that is never
read, it is being updated later on. The assignment is redundant and
can be removed.
Link: https://lore.kernel.org/r/20210605131347.26293-1-colin.king@canonical.com
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
A single statement is indented one level too deeply, clean up the
code by removing the extraneous tab.
Link: https://lore.kernel.org/r/20210605130400.25987-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The shifting of the u8 integer info->map[i] the left will be promoted
to a 32 bit signed int and then sign-extended to a u64. In the event
that the top bit of the u8 is set then all then all the upper 32 bits
of the u64 end up as also being set because of the sign-extension.
Fix this by casting the u8 values to a u64 before the left shift. This
Link: https://lore.kernel.org/r/20210605122059.25105-1-colin.king@canonical.com
Addresses-Coverity: ("Unitentional integer overflow / bad shift operation")
Fixes: 3f49d6842569 ("RDMA/irdma: Implement HW Admin Queue OPs")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
On Macbook 2013, resuming from suspend-to-idle or standby resulted in the
external monitor no longer being detected, a stacktrace, and errors like
this in dmesg:
pcieport 0000:06:00.0: can't change power state from D3hot to D0 (config space inaccessible)
The reason is that we know how to turn power to the Thunderbolt controller
*off* via the SXIO/SXFP/SXLF methods, but we don't know how to turn power
back on. We have to rely on firmware to turn the power back on.
When going to the "suspend-to-idle" or "standby" system sleep states,
firmware is not involved either on the suspend side or the resume side, so
we can't use SXIO/SXFP/SXLF to turn the power off.
Skip SXIO/SXFP/SXLF when firmware isn't involved in suspend, e.g., when
we're going to the "suspend-to-idle" or "standby" system sleep states.
Fixes: 1df5172c5c25 ("PCI: Suspend/resume quirks for Apple thunderbolt")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=212767
Link: https://lore.kernel.org/r/20210520235501.917397-1-Hi-Angel@yandex.ru
Signed-off-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org
|
Eugen Hristev
Thierry Reding
Marek Vasut
Tomi Valkeinen
Bixuan Cui
Shawn Guo
Christian König
Bean Huo
Keoseong Park
Gustavo A. R. Silva
Can Guo
Ming Lei
Dan Carpenter
Avri Altman
Kees Cook
Saurav Kashyap
Kamal Heib
Colin Ian King
Konstantin Kharlamov