aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2021-05-27remoteproc: Fix various kernel-doc warningsSuman Anna3-20/+42
Fix all the kernel-doc warnings in various remoteproc core files. Some of them just needed a formatting cleanup change, while others needed the Return statement to be added, or documenting the missed structure elements. Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suman Anna <s-anna@ti.com> Link: https://lore.kernel.org/r/20210519180304.23563-3-s-anna@ti.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-27remoteproc: Add kernel-doc comment for is_iomemSuman Anna1-0/+1
Add a kernel-doc comment for the is_iomem function argument in rproc_da_to_va(). This fixes a warning generated when building the remoteproc_core with W=1, warning: Function parameter or member 'is_iomem' not described in 'rproc_da_to_va' Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suman Anna <s-anna@ti.com> Link: https://lore.kernel.org/r/20210519180304.23563-2-s-anna@ti.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-28pinctrl: bcm2835: Accept fewer than expected IRQsPhil Elwell1-2/+6
The downstream .dts files only request two GPIO IRQs. Truncate the array of parent IRQs when irq_of_parse_and_map returns 0. Signed-off-by: Phil Elwell <phil@raspberrypi.com> Signed-off-by: Ivan T. Ivanov <iivanov@suse.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210521090158.26932-1-iivanov@suse.de Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-28pinctrl: Fix kernel-docYang Li1-1/+1
Fix function name in pinctrl-single.c kernel-doc comment to remove a warning found by clang_w1. drivers/pinctrl/pinctrl-single.c:1523: warning: expecting prototype for pcs_irq_handle(). Prototype was for pcs_irq_chain_handler() instead. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/1621998464-10918-1-git-send-email-yang.lee@linux.alibaba.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-27Merge tag 'mlx5-updates-2021-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxJakub Kicinski17-186/+306
Saeed Mahameed says: ==================== mlx5-updates-2021-05-26 Misc update for mlx5 driver, 1) Clean up patches for lag and SF 2) Reserve bit 31 in steering register C1 for IPSec offload usage 3) Move steering tables pool logic into the steering core and increase the maximum table size to 2G entries when software steering is enabled. * tag 'mlx5-updates-2021-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: Fix lag port remapping logic net/mlx5: Use boolean arithmetic to evaluate roce_lag net/mlx5: Remove unnecessary spin lock protection net/mlx5: Cap the maximum flow group size to 16M entries net/mlx5: DR, Set max table size to 2G entries net/mlx5: Move chains ft pool to be used by all firmware steering net/mlx5: Move table size calculation to steering cmd layer net/mlx5: Add case for FS_FT_NIC_TX FT in MLX5_CAP_FLOWTABLE_TYPE net/mlx5: DR, Remove unused field of send_ring struct net/mlx5e: RX, Remove unnecessary check in RX CQE compression handling net/mlx5e: IPsec/rep_tc: Fix rep_tc_update_skb drops IPsec packet net/mlx5e: TC: Reserved bit 31 of REG_C1 for IPsec offload net/mlx5e: TC: Use bit counts for register mapping net/mlx5: CT: Avoid reusing modify header context for natted entries net/mlx5e: CT, Remove newline from ct_dbg call ==================== Link: https://lore.kernel.org/r/20210527185624.694304-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-27PCI: Print a debug message on PCI device releaseNiklas Schnelle1-0/+1
Commit 62795041418d ("PCI: enhance physical slot debug information") added a debug print on releasing the PCI slot and another message on destroying it. There is however no debug print on releasing the PCI device structure itself and even with closely looking at the kernel log during hotplug testing, I overlooked several missing pci_dev_put() calls for way too long. Add a debug print in pci_release_dev() making it much easier to spot when the PCI device structure is not released when it is supposed to be. Link: https://lore.kernel.org/r/20210311132312.2882425-1-schnelle@linux.ibm.com Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-05-28pinctrl: pinctrl-aspeed-g6: Add sgpio pinctrl settingsSteven Lee2-4/+29
AST2600 supports 2 SGPIO master interfaces and 2 SGPIO slave interfaces. Current pinctrl driver only define the first sgpio master and slave interfaces. The second SGPIO master and slave interfaces should be added in pinctrl driver as well. Signed-off-by: Steven Lee <steven_lee@aspeedtech.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20210525055308.31069-4-steven_lee@aspeedtech.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-28Merge tag 'amd-drm-fixes-5.13-2021-05-26' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixesDave Airlie10-14/+42
amd-drm-fixes-5.13-2021-05-26: amdgpu: - MultiGPU fan fix - VCN powergating fixes amdkfd: - Fix SDMA register offset error Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210527031831.4057-1-alexander.deucher@amd.com
2021-05-27PCI/AER: Use consistent format when printing PCI deviceYicong Yang1-2/+2
We use format domain:bus:slot.function when printing PCI device. Use consistent format in AER messages. [bhelgaas: also drop "AER recover:" prefix since we already have an "AER:" prefix from pr_fmt()] Link: https://lore.kernel.org/r/1617015721-51701-1-git-send-email-yangyicong@hisilicon.com Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
2021-05-27ixgbe: Fix out-bounds warning in ixgbe_host_interface_command()Gustavo A. R. Silva1-9/+7
Replace union with a couple of pointers in order to fix the following out-of-bounds warning: CC [M] drivers/net/ethernet/intel/ixgbe/ixgbe_common.o drivers/net/ethernet/intel/ixgbe/ixgbe_common.c: In function ‘ixgbe_host_interface_command’: drivers/net/ethernet/intel/ixgbe/ixgbe_common.c:3729:13: warning: array subscript 1 is above array bounds of ‘u32[1]’ {aka ‘unsigned int[1]’} [-Warray-bounds] 3729 | bp->u32arr[bi] = IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, bi); | ~~~~~~~~~~^~~~ drivers/net/ethernet/intel/ixgbe/ixgbe_common.c:3682:7: note: while referencing ‘u32arr’ 3682 | u32 u32arr[1]; | ^~~~~~ This helps with the ongoing efforts to globally enable -Warray-bounds. Link: https://github.com/KSPP/linux/issues/109 Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20210527173424.362456-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-27atl1c: add 4 RX/TX queue support for Mikrotik 10/25G NICGatis Peisenieks3-156/+289
More RX/TX queues on a network card help spread the CPU load among cores and achieve higher overall networking performance. The new Mikrotik 10/25G NIC supports 4 RX and 4 TX queues. TX queues are treated with equal priority. RX queue balancing is fixed based on L2/L3/L4 hash. This adds support for 4 RX/TX queues while maintaining backwards compatibility with older hardware. Simultaneous TX + RX performance on AMD Threadripper 3960X with Mikrotik 10/25G NIC improved from 1.6Mpps to 3.2Mpps per port. Backwards compatiblitiy was verified with AR8151 and AR8131 based NICs. Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-27atl1c: prepare for multiple rx queuesGatis Peisenieks2-61/+57
Move napi and other per queue members into per rx queue struct. Allocate max rx queues that any hw supported by the driver might have. Patch that actually enables multiple rx queues will follow. Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-27atl1c: move tx napi into tpd_ringGatis Peisenieks2-9/+13
To get more performance from using multiple tx queues one needs a per tx queue napi. Move tx napi from per adapter struct into per tx queue struct. Patch that actually enables multiple tx queues will follow. Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-27atl1c: detect NIC type earlyGatis Peisenieks1-29/+27
To support NICs that allow for more than one tx queue it is required to detect NIC type early during probe. This is moves NIC type detection before netdev_alloc to prepare for that. Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-27Merge tag 'for-5.13/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dmLinus Torvalds2-2/+3
Pull device mapper fixes from Mike Snitzer: - Fix DM verity target's 'require_signatures' module_param permissions. - Revert DM snapshot fix from v5.13-rc3 and then properly fix crash when an origin has no snapshots. This allows only the proper fix to go to stable@ (since the original fix was successfully dropped). * tag 'for-5.13/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm snapshot: properly fix a crash when an origin has no snapshots dm snapshot: revert "fix a crash when an origin has no snapshots" dm verity: fix require_signatures module_param permissions
2021-05-27mlxsw: core: use PSID string define in devlink infoJiri Pirko1-1/+3
Instead of having the string spelled out in the driver, use the global define with the same value. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-27mlxsw: core: Expose FW version over defined keywordJiri Pirko1-1/+3
To be aligned with the rest of the drivers, expose FW version under "fw" keyword in devlink dev info, in addition to the existing "fw.version", which is currently Mellanox-specific. devlink output before: running: fw.version 30.2008.2018 after: running: fw.version 30.2008.2018 fw 30.2008.2018 Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-27net/mlx5: Expose FW version over defined keywordJiri Pirko1-2/+8
To be aligned with the rest of the drivers, expose FW version under "fw" keyword in devlink dev info, in addition to the existing "fw.version", which is currently Mellanox-specific. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-27Merge tag 'linux-can-next-for-5.14-20210527' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-nextJakub Kicinski12-144/+179
Marc Kleine-Budde says: ==================== can-next 2021-05-27 The first 2 patches are by Geert Uytterhoeven and convert the rcan_can and rcan_canfd device tree bindings to yaml. The next 2 patches are by Oliver Hartkopp and me and update the CAN uapi headers. zuoqilin's patch removes an unnecessary variable from the CAN proc code. Patrick Menschel contributes 3 patches for CAN ISOTP to enhance the error messages. Jiapeng Chong's patch removes two dead stores from the softing driver. The next 4 patches are by me and silence several warnings found by clang compiler. Jimmy Assarsson's patches for the kvaser_usb driver add support for the Kvaser hydra devices. Dario Binacchi provides 2 patches for the c_can driver, first removing an unused variable, then adding basic ethtool support to query driver and ring parameter info. The last 4 patches are by Torin Cooper-Bennun and clean up the m_can driver. * tag 'linux-can-next-for-5.14-20210527' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (21 commits) can: m_can: fix whitespace in a few comments can: m_can: make TXESC, RXESC config more explicit can: m_can: clean up CCCR reg defs, order by revs can: m_can: use bits.h macros for all regmasks can: c_can: add ethtool support can: c_can: remove unused variable struct c_can_priv::rxmasked can: kvaser_usb: Add new Kvaser hydra devices can: kvaser_usb: Rename define USB_HYBRID_{,PRO_}CANLIN_PRODUCT_ID can: at91_can: silence clang warning can: mcp251xfd: silence clang warning can: mcp251x: mcp251x_can_probe(): silence clang warning can: hi311x: hi3110_can_probe(): silence clang warning can: softing: Remove redundant variable ptr can: isotp: Add error message if txqueuelen is too small can: isotp: add symbolic error message to isotp_module_init() can: isotp: change error format from decimal to symbolic error names can: proc: remove unnecessary variables can: uapi: introduce CANFD_FDF flag for mixed content in struct canfd_frame can: uapi: update CAN-FD frame description dt-bindings: can: rcar_canfd: Convert to json-schema ... ==================== Link: https://lore.kernel.org/r/20210527084532.1384031-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-27i2c: mediatek: Rename i2c irq nameQii Wang1-1/+1
Rename i2c irq name with dev_name() which can provide unique naming in /proc/interrupts for each instance of the I2C IP core. Signed-off-by: Qii Wang <qii.wang@mediatek.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-05-27i2c: i801: Use standard PCI constants instead of own onesHeiner Kallweit1-14/+6
Layout of these registers is part of the PCI standard. Therefore use the constants defined by the PCI subsystem. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Tested-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-05-27i2c: i801: Replace waitqueue with completion APIHeiner Kallweit1-29/+19
Using the completion API is more intuitive and it allows to simplify the code. Note that we don't have to set priv->status = 0 any longer with the completion API. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Tested-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-05-27i2c: i801: Remove unneeded warning after wait_event_timeout timeoutHeiner Kallweit1-8/+4
When passing -ETIMEDOUT to i801_check_post() it will emit a timeout error message. I don't see much benefit in an additional warning stating more or less the same. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Tested-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-05-27i2c: i801: Don't generate an interrupt on bus resetJean Delvare1-4/+2
Now that the i2c-i801 driver supports interrupts, setting the KILL bit in a attempt to recover from a timed out transaction triggers an interrupt. Unfortunately, the interrupt handler (i801_isr) is not prepared for this situation and will try to process the interrupt as if it was signaling the end of a successful transaction. In the case of a block transaction, this can result in an out-of-range memory access. This condition was reproduced several times by syzbot: https://syzkaller.appspot.com/bug?extid=ed71512d469895b5b34e https://syzkaller.appspot.com/bug?extid=8c8dedc0ba9e03f6c79e https://syzkaller.appspot.com/bug?extid=c8ff0b6d6c73d81b610e https://syzkaller.appspot.com/bug?extid=33f6c360821c399d69eb https://syzkaller.appspot.com/bug?extid=be15dc0b1933f04b043a https://syzkaller.appspot.com/bug?extid=b4d3fd1dfd53e90afd79 So disable interrupts while trying to reset the bus. Interrupts will be enabled again for the following transaction. Fixes: 636752bcb517 ("i2c-i801: Enable IRQ for SMBus transactions") Reported-by: syzbot+b4d3fd1dfd53e90afd79@syzkaller.appspotmail.com Signed-off-by: Jean Delvare <jdelvare@suse.de> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-05-27i2c: mpc: implement erratum A-004447 workaroundChris Packham1-2/+79
The P2040/P2041 has an erratum where the normal i2c recovery mechanism does not work. Implement the alternative recovery mechanism documented in the P2040 Chip Errata Rev Q. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-05-27i2c: aspeed: disable additional device addresses on ast2[56]xxZev Weiss1-4/+8
The ast25xx and ast26xx have, respectively, two and three configurable slave device addresses to the ast24xx's one. We only support using one at a time, but the others may come up in an indeterminate state depending on hardware/bootloader behavior, so we need to make sure we disable them so as to avoid ending up with phantom devices on the bus. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Tested-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-05-27i2c: busses: i2c-stm32f4: Remove incorrectly placed ' ' from function nameLee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/i2c/busses/i2c-stm32f4.c:321: warning: expecting prototype for stm32f4_i2c_write_ byte()(). Prototype was for stm32f4_i2c_write_byte() instead Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Alain Volmat <alain.volmat@foss.st.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-05-27i2c: busses: i2c-st: Fix copy/paste function misnaming issuesLee Jones1-2/+2
Fixes the following W=1 kernel build warning(s): drivers/i2c/busses/i2c-st.c:531: warning: expecting prototype for st_i2c_handle_write(). Prototype was for st_i2c_handle_read() instead drivers/i2c/busses/i2c-st.c:566: warning: expecting prototype for st_i2c_isr(). Prototype was for st_i2c_isr_thread() instead Fix the "enmpty" typo while here. Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Alain Volmat <alain.volmat@foss.st.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-05-27i2c: busses: i2c-pnx: Provide descriptions for 'alg_data' data structureLee Jones1-4/+4
Fixes the following W=1 kernel build warning(s): drivers/i2c/busses/i2c-pnx.c:147: warning: Function parameter or member 'alg_data' not described in 'i2c_pnx_start' drivers/i2c/busses/i2c-pnx.c:147: warning: Excess function parameter 'adap' description in 'i2c_pnx_start' drivers/i2c/busses/i2c-pnx.c:202: warning: Function parameter or member 'alg_data' not described in 'i2c_pnx_stop' drivers/i2c/busses/i2c-pnx.c:202: warning: Excess function parameter 'adap' description in 'i2c_pnx_stop' drivers/i2c/busses/i2c-pnx.c:231: warning: Function parameter or member 'alg_data' not described in 'i2c_pnx_master_xmit' drivers/i2c/busses/i2c-pnx.c:231: warning: Excess function parameter 'adap' description in 'i2c_pnx_master_xmit' drivers/i2c/busses/i2c-pnx.c:301: warning: Function parameter or member 'alg_data' not described in 'i2c_pnx_master_rcv' drivers/i2c/busses/i2c-pnx.c:301: warning: Excess function parameter 'adap' description in 'i2c_pnx_master_rcv' Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-05-27i2c: busses: i2c-ocores: Place the expected function names into the documentation headersLee Jones1-4/+4
Fixes the following W=1 kernel build warning(s): drivers/i2c/busses/i2c-ocores.c:253: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/i2c/busses/i2c-ocores.c:267: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/i2c/busses/i2c-ocores.c:299: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/i2c/busses/i2c-ocores.c:347: warning: expecting prototype for It handles an IRQ(). Prototype was for ocores_process_polling() instead Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-05-27i2c: busses: i2c-eg20t: Fix 'bad line' issue and provide description for 'msgs' paramLee Jones1-1/+2
Fixes the following W=1 kernel build warning(s): drivers/i2c/busses/i2c-eg20t.c:151: warning: bad line: PCH i2c controller drivers/i2c/busses/i2c-eg20t.c:369: warning: Function parameter or member 'msgs' not described in 'pch_i2c_writebytes' Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-05-27i2c: busses: i2c-designware-master: Fix misnaming of 'i2c_dw_init_master()'Lee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/i2c/busses/i2c-designware-master.c:176: warning: expecting prototype for i2c_dw_init(). Prototype was for i2c_dw_init_master() instead Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-05-27i2c: busses: i2c-cadence: Fix incorrectly documented 'enum cdns_i2c_slave_mode'Lee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/i2c/busses/i2c-cadence.c:157: warning: expecting prototype for enum cdns_i2c_slave_mode. Prototype was for enum cdns_i2c_slave_state instead Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-05-27drm/dp_mst: Use kHz as link rate units when settig source max link caps at initNikola Cornij5-11/+12
[why] Link rate in kHz is what is eventually required to calculate the link bandwidth, which makes kHz a more generic unit. This should also make forward-compatibility with new DP standards easier. [how] - Replace 'link rate DPCD code' with 'link rate in kHz' when used with drm_dp_mst_topology_mgr_init() - Add/remove related DPCD code conversion from/to kHz where applicable Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210512210011.8425-2-nikola.cornij@amd.com
2021-05-27i2c: busses: i2c-ali1563: File headers are not good candidates for kernel-docLee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/i2c/busses/i2c-ali1563.c:24: warning: expecting prototype for i2c(). Prototype was for ALI1563_MAX_TIMEOUT() instead Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-05-27i2c: muxes: i2c-arb-gpio-challenge: Demote non-conformant kernel-doc headersLee Jones1-2/+2
Fixes the following W=1 kernel build warning(s): drivers/i2c/muxes/i2c-arb-gpio-challenge.c:43: warning: Function parameter or member 'muxc' not described in 'i2c_arbitrator_select' drivers/i2c/muxes/i2c-arb-gpio-challenge.c:43: warning: Function parameter or member 'chan' not described in 'i2c_arbitrator_select' drivers/i2c/muxes/i2c-arb-gpio-challenge.c:86: warning: Function parameter or member 'muxc' not described in 'i2c_arbitrator_deselect' drivers/i2c/muxes/i2c-arb-gpio-challenge.c:86: warning: Function parameter or member 'chan' not described in 'i2c_arbitrator_deselect' Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Douglas Anderson <dianders@chromium.org> Acked-by: Peter Rosin <peda@axentia.se> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-05-27i2c: busses: i2c-nomadik: Fix formatting issue pertaining to 'timeout'Lee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/i2c/busses/i2c-nomadik.c:184: warning: Function parameter or member 'timeout' not described in 'nmk_i2c_dev' Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-05-27Merge back ACPI power management material for v5.14.Rafael J. Wysocki4-8/+22
2021-05-27pata_ep93xx: fix deferred probingSergey Shtylyov1-1/+1
The driver overrides the error codes returned by platform_get_irq() to -ENXIO, so if it returns -EPROBE_DEFER, the driver would fail the probe permanently instead of the deferred probing. Propagate the error code upstream, as it should have been done from the start... Fixes: 2fff27512600 ("PATA host controller driver for ep93xx") Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru> Link: https://lore.kernel.org/r/509fda88-2e0d-2cc7-f411-695d7e94b136@omprussia.ru Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-05-27drm/amd/display: Enable support for 16 bpc fixed-point framebuffers.Mario Kleiner1-0/+12
This is intended to enable direct high-precision scanout and pageflip of Vulkan swapchain images in format VK_FORMAT_R16G16B16A16_UNORM. Expose DRM_FORMAT_XRGB16161616, DRM_FORMAT_ARGB16161616, DRM_FORMAT_XBGR16161616 and DRM_FORMAT_ABGR16161616 as 16 bpc unsigned normalized formats. These allow to take full advantage of the maximum precision of the display hardware, ie. currently up to 12 bpc. Searching through old AMD M56, M76 and RV630 hw programming docs suggests that these 16 bpc formats are supported by all DCE and DCN display engines, so we can expose the formats unconditionally. Successfully tested on AMD Polaris11 DCE-11.2 an RavenRidge DCN-1.0 with a HDR-10 monitor over 10 bpc DP output with spatial dithering enabled by the driver. Picture looks good, and my photometer measurement procedure confirms an effective 12 bpc color reproduction. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-27drm/amd/display: Make assert in DCE's program_bit_depth_reduction more lenient.Mario Kleiner1-2/+2
This is needed to avoid warnings with linebuffer depth 36 bpp. Testing on a Polaris11, DCE-11.2 on a 10 bit HDR-10 monitor showed no obvious problems, and this 12 bpc limit is consistent with what other function in the DCE bit depth reduction path use. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-27drm/amd/display: Increase linebuffer pixel depth to 36bpp.Mario Kleiner8-10/+19
Testing with the photometer shows that at least Raven Ridge DCN-1.0 does not achieve more than 10 bpc effective output precision with a 16 bpc unorm surface of type SURFACE_PIXEL_FORMAT_GRPH_ABGR16161616, unless linebuffer depth is increased from LB_PIXEL_DEPTH_30BPP to LB_PIXEL_DEPTH_36BPP. Otherwise precision gets truncated somewhere to 10 bpc effective depth. Strangely this increase was not needed on Polaris11 DCE-11.2 during testing to get 12 bpc effective precision. It also is not needed for fp16 framebuffers. Tested on DCN-1.0 and DCE-11.2. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-27drm/amd/display: Add support for SURFACE_PIXEL_FORMAT_GRPH_ABGR16161616.Mario Kleiner15-6/+29
Add the necessary format definition, bandwidth and pixel size mappings, prescaler setup, and pixelformat selection, following the logic already present for SURFACE_PIXEL_FORMAT_GRPH_ARGB16161616. The new SURFACE_PIXEL_FORMAT_GRPH_ABGR16161616 is implemented as the old SURFACE_PIXEL_FORMAT_GRPH_ARGB16161616 format, but with swapped red <-> green color channel, by use of the hardware xbar. Please note that on the DCN 1/2/3 display engines, the pixelformat in hubp and dpp setup for the old SURFACE_PIXEL_FORMAT_GRPH_ARGB16161616 and the new SURFACE_PIXEL_FORMAT_GRPH_ABGR16161616 was changed from format id 22 to id 26. See amd/include/navi10_enum.h for the meaning of the id's. For format 22, the display engine read the framebuffer in 16 bpc format, but truncated to the 12 bpc actually supported by later pipeline stages. However, the engine took the 12 LSB of each color component for truncation, which is incompatible with rendering at least under Vulkan, where content is 16 bit wide, and a 12 MSB alignment would be appropriate, if any. Format 20 for ARGB16161616_12MSB does work, but even better, we can choose format 26 for ARGB16161616_UNORM, keeping all 16 bits around until later stages of the display pipeline. This allows to directly consume what the rendering hw produces under Vulkan for swapchain format VK_FORMAT_R16G16B16A16_UNORM, as tested with a patched version of the current AMD open-source amdvlk driver which maps swapchain format VK_FORMAT_R16G16B16A16_UNORM onto DRM_FORMAT_XBGR16161616. The old id 22 would cause colorful pixeltrash to be displayed instead. Tested under DCN-1.0 and DCE-11.2. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-27drm/fourcc: Add 16 bpc fixed point framebuffer formats.Mario Kleiner1-0/+4
These are 16 bits per color channel unsigned normalized formats. They are supported by at least AMD display hw, and suitable for direct scanout of Vulkan swapchain images in the format VK_FORMAT_R16G16B16A16_UNORM. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-27net/mlx5: Fix lag port remapping logicEli Cohen1-6/+13
Fix the logic so that if both ports netdevices are enabled or disabled, use the trivial mapping without swapping. If only one of the netdevice's tx is enabled, use it to remap traffic to that port. Signed-off-by: Eli Cohen <elic@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-05-27net/mlx5: Use boolean arithmetic to evaluate roce_lagEli Cohen1-2/+3
Avoid mixing boolean and bit arithmetic when evaluating validity of roce_lag. Signed-off-by: Eli Cohen <elic@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-05-27net/mlx5: Remove unnecessary spin lock protectionEli Cohen1-4/+0
Taking lag_lock to access ldev->tracker is meaningless in the context of do_bond() and mlx5_lag_netdev_event(). Signed-off-by: Eli Cohen <elic@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-05-27net/mlx5: Cap the maximum flow group size to 16M entriesPaul Blakey1-0/+5
The maximum number of large flow groups applies to both small and large tables. For very large tables (such as the 2G SW steering tables) this may create a small number of flow groups each with an unrealistic entries domain (> 16M). Set the maximum number of large flow groups to at least what user requested, but with a maximum per group size of 16M entries. For software steering, if user requested less than 128 large flow groups, it will gives us about 128 16M groups in a 2G entries tables. Signed-off-by: Paul Blakey <paulb@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-05-27net/mlx5: DR, Set max table size to 2G entriesPaul Blakey1-1/+1
SW steering has no table size limitations. However, fs_core API is size aware. Set SW steering tables to the maximum possible table size (INT_MAX). Signed-off-by: Paul Blakey <paulb@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-05-27net/mlx5: Move chains ft pool to be used by all firmware steeringPaul Blakey6-98/+149
Firmware FT pool is per device, but the software tracking of this pool only services fs_chains users, and if another layer takes a flow table, the pool will not be updated, and fs_chains will fail creating a flow table, with no recovery till the flow table is returned. Move FT pool to be global per device, and stored at the cmd level, so all layers can use it. Signed-off-by: Paul Blakey <paulb@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.