aboutsummaryrefslogtreecommitdiffstats
path: root/drivers (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-08-29drm/i915: Skip wm/ddb readout for disabled pipesVille Syrjälä1-1/+7
The stuff programmed into the wm/ddb registers of planes on disabled pipes doesn't matter. So during readout just leave our software state tracking for those zeroed. This should avoid us trying too hard to clean up after whatever mess the VBIOS/GOP left in there. The actual hardware state will get cleaned up if/when we enable the pipe anyway. Cc: stable@vger.kernel.org Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5711 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220617195948.24007-1-ville.syrjala@linux.intel.com Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> (cherry picked from commit b183db8f4783ca2efc9b47734f15aad9477a108a) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2022-08-29drm/i915/glk: ECS Liva Q2 needs GLK HDMI port timing quirkDiego Santa Cruz1-0/+3
The quirk added in upstream commit 90c3e2198777 ("drm/i915/glk: Add Quirk for GLK NUC HDMI port issues.") is also required on the ECS Liva Q2. Note: Would be nicer to figure out the extra delay required for the retimer without quirks, however don't know how to check for that. Cc: stable@vger.kernel.org Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1326 Signed-off-by: Diego Santa Cruz <Diego.SantaCruz@spinetix.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220616124137.3184371-1-jani.nikula@intel.com (cherry picked from commit 08e9505fa8f9aa00072a47b6f234d89b6b27a89c) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2022-08-29drm/i915: fix null pointer dereferenceŁukasz Bartosik1-7/+9
Asus chromebook CX550 crashes during boot on v5.17-rc1 kernel. The root cause is null pointer defeference of bi_next in tgl_get_bw_info() in drivers/gpu/drm/i915/display/intel_bw.c. BUG: kernel NULL pointer dereference, address: 000000000000002e PGD 0 P4D 0 Oops: 0002 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 1 Comm: swapper/0 Tainted: G U 5.17.0-rc1 Hardware name: Google Delbin/Delbin, BIOS Google_Delbin.13672.156.3 05/14/2021 RIP: 0010:tgl_get_bw_info+0x2de/0x510 ... [ 2.554467] Call Trace: [ 2.554467] <TASK> [ 2.554467] intel_bw_init_hw+0x14a/0x434 [ 2.554467] ? _printk+0x59/0x73 [ 2.554467] ? _dev_err+0x77/0x91 [ 2.554467] i915_driver_hw_probe+0x329/0x33e [ 2.554467] i915_driver_probe+0x4c8/0x638 [ 2.554467] i915_pci_probe+0xf8/0x14e [ 2.554467] ? _raw_spin_unlock_irqrestore+0x12/0x2c [ 2.554467] pci_device_probe+0xaa/0x142 [ 2.554467] really_probe+0x13f/0x2f4 [ 2.554467] __driver_probe_device+0x9e/0xd3 [ 2.554467] driver_probe_device+0x24/0x7c [ 2.554467] __driver_attach+0xba/0xcf [ 2.554467] ? driver_attach+0x1f/0x1f [ 2.554467] bus_for_each_dev+0x8c/0xc0 [ 2.554467] bus_add_driver+0x11b/0x1f7 [ 2.554467] driver_register+0x60/0xea [ 2.554467] ? mipi_dsi_bus_init+0x16/0x16 [ 2.554467] i915_init+0x2c/0xb9 [ 2.554467] ? mipi_dsi_bus_init+0x16/0x16 [ 2.554467] do_one_initcall+0x12e/0x2b3 [ 2.554467] do_initcall_level+0xd6/0xf3 [ 2.554467] do_initcalls+0x4e/0x79 [ 2.554467] kernel_init_freeable+0xed/0x14d [ 2.554467] ? rest_init+0xc1/0xc1 [ 2.554467] kernel_init+0x1a/0x120 [ 2.554467] ret_from_fork+0x1f/0x30 [ 2.554467] </TASK> ... Kernel panic - not syncing: Fatal exception Fixes: c64a9a7c05be ("drm/i915: Update memory bandwidth formulae") Signed-off-by: Łukasz Bartosik <lb@semihalf.com> Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220201153354.11971-1-lukasz.bartosik@semihalf.com (cherry picked from commit c247cd03898c4c43c3bce6d4014730403bc13032) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2022-08-29drm/i915/backlight: Disable pps power hook for aux based backlightJouni Högander2-5/+8
Pps power hook seems to be problematic for backlight controlled via aux channel. Disable it for such cases. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3657 Cc: stable@vger.kernel.org Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220822140836.534432-1-jouni.hogander@intel.com (cherry picked from commit 869e3bb7acb59d88c1226892136661810e8223a4) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2022-08-29drm/i915/display: avoid warnings when registering dual panel backlightArun R Murthy1-14/+12
Commit 20f85ef89d94 ("drm/i915/backlight: use unique backlight device names") added support for multiple backlight devices on dual panel systems, but did so with error handling on -EEXIST from backlight_device_register(). Unfortunately, that triggered a warning in dmesg all the way down from sysfs_add_file_mode_ns() and sysfs_warn_dup(). Instead of optimistically always attempting to register with the default name ("intel_backlight", which we have to retain for backward compatibility), check if a backlight device with the name exists first, and, if so, use the card and connector based name. v2: reworked on top of the patch commit 20f85ef89d94 ("drm/i915/backlight: use unique backlight device names") v3: fixed the ref count leak(Jani N) Fixes: 20f85ef89d94 ("drm/i915/backlight: use unique backlight device names") Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220808035750.3111046-1-arun.r.murthy@intel.com (cherry picked from commit 4234ea30051200fc6016de10e4d58369e60b38f1) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2022-08-29drm/i915/dsi: fix dual-link DSI backlight and CABC ports for display 11+Jani Nikula1-4/+6
The VBT dual-link DSI backlight and CABC still use ports A and C, both in Bspec and code, while display 11+ DSI only supports ports A and B. Assume port C actually means port B for display 11+ when parsing VBT. Bspec: 20154 Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6476 Cc: stable@vger.kernel.org Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/8c462718bcc7b36a83e09d0a5eef058b6bc8b1a2.1660664162.git.jani.nikula@intel.com (cherry picked from commit ab55165d73a444606af1530cd0d6448b04370f68) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2022-08-29drm/i915/dsi: filter invalid backlight and CABC portsJani Nikula2-0/+14
Avoid using ports that aren't initialized in case the VBT backlight or CABC ports have invalid values. This fixes a NULL pointer dereference of intel_dsi->dsi_hosts[port] in such cases. Cc: stable@vger.kernel.org Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/b0f4f087866257d280eb97d6bcfcefd109cc5fa2.1660664162.git.jani.nikula@intel.com (cherry picked from commit f4a6c7a454a6e71c5ccf25af82694213a9784013) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2022-08-29drm/i915/guc: clear stalled request after a resetDaniele Ceraolo Spurio1-0/+7
If the GuC CTs are full and we need to stall the request submission while waiting for space, we save the stalled request and where the stall occurred; when the CTs have space again we pick up the request submission from where we left off. If a full GT reset occurs, the state of all contexts is cleared and all non-guilty requests are unsubmitted, therefore we need to restart the stalled request submission from scratch. To make sure that we do so, clear the saved request after a reset. Fixes note: the patch that introduced the bug is in 5.15, but no officially supported platform had GuC submission enabled by default in that kernel, so the backport to that particular version (and only that one) can potentially be skipped. Fixes: 925dc1cf58ed ("drm/i915/guc: Implement GuC submission tasklet") Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: John Harrison <john.c.harrison@intel.com> Cc: <stable@vger.kernel.org> # v5.15+ Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220811210812.3239621-1-daniele.ceraolospurio@intel.com (cherry picked from commit f922fbb0f2ad1fd3e3186f39c46673419e6d9281) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2022-08-29drm/i915/ttm: fix CCS handlingMatthew Auld1-23/+21
Crucible + recent Mesa seems to sometimes hit: GEM_BUG_ON(num_ccs_blks > NUM_CCS_BLKS_PER_XFER) And it looks like we can also trigger this with gem_lmem_swapping, if we modify the test to use slightly larger object sizes. Looking closer it looks like we have the following issues in migrate_copy(): - We are using plain integer in various places, which we can easily overflow with a large object. - We pass the entire object size (when the src is lmem) into emit_pte() and then try to copy it, which doesn't work, since we only have a few fixed sized windows in which to map the pages and perform the copy. With an object > 8M we therefore aren't properly copying the pages. And then with an object > 64M we trigger the GEM_BUG_ON(num_ccs_blks > NUM_CCS_BLKS_PER_XFER). So it looks like our copy handling for any object > 8M (which is our CHUNK_SZ) is currently broken on DG2. Fixes: da0595ae91da ("drm/i915/migrate: Evict and restore the flatccs capable lmem obj") Testcase: igt@gem_lmem_swapping Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Ramalingam C<ramalingam.c@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220805132240.442747-2-matthew.auld@intel.com (cherry picked from commit 8676145eb2f53a9940ff70910caf0125bd8a4bc2) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2022-08-29Merge tag 'gvt-fixes-2022-08-22' of https://github.com/intel/gvt-linux into drm-intel-fixesRodrigo Vivi5-7/+8
gvt-fixes-2022-08-22 - CometLake regression fix in mmio table rework (Alex) - misc kernel doc and typo fixes Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> From: Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220822031215.GJ1089@zhen-hp.sh.intel.com
2022-08-29drm/bridge: anx7625: Support HDMI_I2S audio formatXin Ji1-6/+17
1. Support HDMI_I2S audio format. 2. Return 0 if there is no sink connection in .hw_param callback. Signed-off-by: Xin Ji <xji@analogixsemi.com> Acked-by: Hsin-Yi Wang <hsinyi@chromium.org> Acked-by: Jiaxin Yu<jiaxin.yu@mediatek.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220726033058.403715-1-xji@analogixsemi.com
2022-08-29media: media/v4l2-mem2mem.h: rename 'videobuf' to 'vb2'Hans Verkuil1-3/+3
It is confusing to refer to vb2 structures with 'videobuf', since that typically is used to refer to the old videobuf version 1 framework. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: vb2: videobuf -> videobuf2Hans Verkuil3-11/+11
It is confusing to use the term 'videobuf' or 'video-buf' since that usually refers to the old videobuf version 1 framework. Rename to 'videobuf2' or vb2. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: media/pci/ngene/ngene.h: remove #ifdef NGENE_V4LHans Verkuil1-78/+0
Remove the dead code under NGENE_V4L. Among others, this removes references to the old videobuf framework that isn't actually used by this driver. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29USB: serial: option: add support for Cinterion MV32-WA/WB RmNet modeSlark Xiao1-0/+6
We added PIDs for MV32-WA/WB MBIM mode before, now we need to add support for RmNet mode. Test evidence as below: T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=03 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1e2d ProdID=00f3 Rev=05.04 S: Manufacturer=Cinterion S: Product=Cinterion PID 0x00F3 USB Mobile Broadband S: SerialNumber=d7b4be8d C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=03 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1e2d ProdID=00f4 Rev=05.04 S: Manufacturer=Cinterion S: Product=Cinterion PID 0x00F4 USB Mobile Broadband S: SerialNumber=d095087d C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option Signed-off-by: Slark Xiao <slark_xiao@163.com> [ johan: sort entries ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2022-08-29media: zoran: move to mainlineHans Verkuil22-22/+2
The zoran driver can be moved back to mainline after it has been converted by Corentin Labbe to vb2. Note that the zoran driver no longer supports video output, but video capture is working fine now. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: zoran: from VB2_READ/WRITE: read/write isn't supportedHans Verkuil1-1/+1
The read/write file operations are not implemented, so no need to set VB2_READ and VB2_WRITE flags. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: zoran: the video device is video capture only, not M2MHans Verkuil1-6/+1
Set vfl_dir correctly as a capture device instead of as a M2M device. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: zoran: fix checkpatch --strict issuesHans Verkuil13-520/+448
Prepare for moving this driver to mainline by fixing the remaining checkpatch issues. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: ti/omap: fix repeated words in commentswangjianli1-1/+1
Delete the redundant word 'the'. Signed-off-by: wangjianli <wangjianli@cdjrlc.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: pci/cx23885: fix repeated words in commentswangjianli1-1/+1
Delete the redundant word 'of'. Signed-off-by: wangjianli <wangjianli@cdjrlc.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: pci/cx18: fix repeated words in commentswangjianli1-1/+1
Delete the redundant word 'of'. Signed-off-by: wangjianli <wangjianli@cdjrlc.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: pci/cx18: fix repeated words in commentswangjianli1-1/+1
Delete the redundant word 'of'. Signed-off-by: wangjianli <wangjianli@cdjrlc.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: i2c/cx25840: fix repeated words in commentswangjianli1-1/+1
Delete the redundant word 'of'. Signed-off-by: wangjianli <wangjianli@cdjrlc.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: v4l2-flash: Fix comment typoJason Wang1-1/+1
The double `the' is duplicated in the comment, remove one. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: technisat-usb2: Fix comment typoJason Wang1-1/+1
The double `is' is duplicated in the comment, remove one. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: drxk: Fix comment typoJason Wang1-1/+1
The double `for' is duplicated in the comment, remove one. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: v4l2-ioctl: Fix typo 'the the' in commentSlark Xiao1-1/+1
Replace 'the the' with 'the' in the comment. [hverkuil: the the -> that the] Signed-off-by: Slark Xiao <slark_xiao@163.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: tm6000: Fix typo 'the the' in commentSlark Xiao1-1/+1
Replace 'the the' with 'the' in the comment. Signed-off-by: Slark Xiao <slark_xiao@163.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: gspca: Fix typo 'the the' in commentSlark Xiao1-1/+1
Replace 'the the' with 'the' in the comment. Signed-off-by: Slark Xiao <slark_xiao@163.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: platform: ti: Fix typo 'the the' in commentSlark Xiao2-2/+2
Replace 'the the' with 'the' in the comment. Signed-off-by: Slark Xiao <slark_xiao@163.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: saa7164: Fix typo 'the the' in commentSlark Xiao1-1/+1
Replace 'the the' with 'the' in the comment. Signed-off-by: Slark Xiao <slark_xiao@163.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: ivtv: Fix typo 'the the' in commentSlark Xiao1-1/+1
Replace 'the the' with 'the' in the comment. Signed-off-by: Slark Xiao <slark_xiao@163.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: cx88: Fix typo 'the the' in commentSlark Xiao1-1/+1
Replace 'the the' with 'the' in the comment. Signed-off-by: Slark Xiao <slark_xiao@163.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: dvb-frontends: Fix typo 'the the' in commentSlark Xiao2-2/+2
Replace 'the the' with 'the' in the comment. Signed-off-by: Slark Xiao <slark_xiao@163.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: sun6i-csi: Fix comment typoJason Wang1-1/+1
The double `the' is duplicated in the comment, remove one. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: dib8000: Fix comment typoJason Wang1-1/+1
The double `this' is duplicated in line 3215, remove one. [hverkuil: while we're at it, fix the 'succedeed' typo as well] Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: staging/media/av7110/av7110: Fix typo in stringLi zeming1-1/+1
Remove the repeated ',' from string Signed-off-by: Li zeming <zeming@nfschina.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: dw100: Add i.MX8MP dw100 dewarper driverXavier Roumegue6-0/+1844
Add a V4L2 mem-to-mem driver for the Vivante DW100 Dewarp Processor IP core found on i.MX8MP SoC. The processor core applies a programmable geometrical transformation on input images to correct distorsion introduced by lenses. The transformation function is exposed as a grid map with 16x16 pixel macroblocks indexed using X, Y vertex coordinates. The dewarping map can be set from application through a dedicated v4l2 control. If not set or invalid, the driver computes an identity map prior to starting the processing engine. The driver supports scaling, cropping and pixel format conversion. Signed-off-by: Xavier Roumegue <xavier.roumegue@oss.nxp.com> Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: v4l2-ctrls: Export default v4l2_ctrl_type_ops callbacksXavier Roumegue1-13/+17
Export the callback functions of the default v4l2 control type operations such as a driver defining its own operations could reuse some of them. Signed-off-by: Xavier Roumegue <xavier.roumegue@oss.nxp.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: v4l2-ctrls: optimize type_ops for arraysHans Verkuil2-55/+96
Initializing arrays and validating or checking for equality of arrays is suboptimal since it does this per element. Change the ops to operate on the whole payload to speed up array operations. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29USB: serial: ftdi_sio: add Omron CS1W-CIF31 device idNiek Nooijens2-0/+8
works perfectly with: modprobe ftdi_sio echo "0590 00b2" | tee /sys/module/ftdi_sio/drivers/usb-serial\:ftdi_sio/new_id > /dev/null but doing this every reboot is a pain in the ass. Signed-off-by: Niek Nooijens <niek.nooijens@omron.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2022-08-29USB: serial: option: add Quectel EM060K modemYonglin Tan1-0/+4
Add usb product id entry for the Quectel EM060K module. "MBIM mode": DIAG + NMEA + AT + MODEM + MBIM + QDSS T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=030b Rev= 5.04 S: Manufacturer=Quectel S: Product=EM060K-GL S: SerialNumber=89fb57db C:* #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 8 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 8 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 9 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 9 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#=12 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Yonglin Tan <yonglin.tan@outlook.com> [ johan: mention QDSS port and sort entries ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2022-08-29Merge drm/drm-next into drm-intel-nextJani Nikula4622-112942/+360765
Sync drm-intel-next with v6.0-rc as well as recent drm-intel-gt-next. Since drm-next does not have commit f0c70d41e4e8 ("drm/i915/guc: remove runtime info printing from time stamp logging") yet, only drm-intel-gt-next, will need to do that as part of the merge here to build. Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2022-08-29drm/i915/guc: Remove log size module parametersJoonas Lahtinen3-19/+3
Remove the module parameters for configuring GuC log size. We should instead rely on tuning the defaults to be usable for reporting bugs. v2: - Use correct 1M unit Fixes: 8ad0152afb1b ("drm/i915/guc: Make GuC log sizes runtime configurable") Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220826092343.184568-1-joonas.lahtinen@linux.intel.com
2022-08-29net: Use u64_stats_fetch_begin_irq() for stats fetch.Sebastian Andrzej Siewior9-42/+42
On 32bit-UP u64_stats_fetch_begin() disables only preemption. If the reader is in preemptible context and the writer side (u64_stats_update_begin*()) runs in an interrupt context (IRQ or softirq) then the writer can update the stats during the read operation. This update remains undetected. Use u64_stats_fetch_begin_irq() to ensure the stats fetch on 32bit-UP are not interrupted by a writer. 32bit-SMP remains unaffected by this change. Cc: "David S. Miller" <davem@davemloft.net> Cc: Catherine Sullivan <csully@google.com> Cc: David Awogbemila <awogbemila@google.com> Cc: Dimitris Michailidis <dmichail@fungible.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Jeroen de Borst <jeroendb@google.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Simon Horman <simon.horman@corigine.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Cc: oss-drivers@corigine.com Cc: stable@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-29net: dsa: xrs700x: Use irqsave variant for u64 stats updateSebastian Andrzej Siewior1-2/+3
xrs700x_read_port_counters() updates the stats from a worker using the u64_stats_update_begin() version. This is okay on 32-UP since on the reader side preemption is disabled. On 32bit-SMP the writer can be preempted by the reader at which point the reader will spin on the seqcount until writer continues and completes the update. Assigning the mib_mutex mutex to the underlying seqcount would ensure proper synchronisation. The API for that on the u64_stats_init() side isn't available. Since it is the only user, just use disable interrupts during the update. Use u64_stats_update_begin_irqsave() on the writer side to ensure an uninterrupted update. Fixes: ee00b24f32eb8 ("net: dsa: add Arrow SpeedChips XRS700x driver") Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: George McCollister <george.mccollister@gmail.com> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: George McCollister <george.mccollister@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-29USB: serial: option: add support for OPPO R11 diag portYan Xinyu1-0/+5
Add support for OPPO R11 USB diag serial port to option driver. This phone uses Qualcomm Snapdragon 660 SoC. usb-devices output: T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=22d9 ProdID=276c Rev=04.04 S: Manufacturer=OPPO S: Product=SDM660-MTP _SN:09C6BCA7 S: SerialNumber=beb2c403 C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option I: If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs Signed-off-by: Yan Xinyu <sdlyyxy@bupt.edu.cn> Link: https://lore.kernel.org/r/20220714102037.4113889-1-sdlyyxy@bupt.edu.cn Link: https://lore.kernel.org/r/Yt1WfSZk03Plpnan@hovoldconsulting.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2022-08-29net: sparx5: add support for mrouter portsCasper Andersson4-7/+80
All multicast should be forwarded to mrouter ports. Mrouter ports must therefore be part of all active multicast groups, and override flooding from being disabled. Signed-off-by: Casper Andersson <casper.casan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-29net: sparx5: add list for mdb entries in driverCasper Andersson3-82/+132
Keep track of all mdb entries in software for easy access. Signed-off-by: Casper Andersson <casper.casan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.