| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This workaround requires that VIDEO_DIP_ENABLE_VSC_HSW is never set
with PSR.
BSpec: 54369
BSpec: 54077
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210418002126.87882-5-jose.souza@intel.com
|
|
HSW_TVIDEO_DIP_CTL is read but not used.
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210418002126.87882-4-jose.souza@intel.com
|
|
No functional changes in here.
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210418002126.87882-3-jose.souza@intel.com
|
|
All of this places don't need to intel_psr_enabled() that will lock
psr mutex, check state and unlock.
Instead it can directly check PSR state in intel_crtc_state, the only
place that was not possible was intel_read_dp_vsc_sdp() but since
"drm/i915/display: Fill PSR state during hardware configuration read
out" it is possible.
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210418002126.87882-2-jose.souza@intel.com
|
|
So far if we had a mismatch between the state asked and what was
programmed in hardware for PSR, this mismatch would go unnoticed.
So here adding the PSR to the hardware configuration readout,
EDP_PSR_CTL and EDP_PSR2_CTL can't be directly read because its state
flips due to other factors like frontbuffer modifications and CRC.
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210418002126.87882-1-jose.souza@intel.com
|
|
Fragmentation is used only with unicast frames. Drop multicast fragments
to avoid any undesired behavior.
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01734-QCAHKSWPL_SILICONZ-1 v2
Cc: stable@vger.kernel.org
Signed-off-by: Sriram R <srirrama@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Link: https://lore.kernel.org/r/20210511200110.1d53bfd20a8b.Ibb63283051bb5e2c45951932c6e1f351d5a73dc3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently the fragment cache setup during peer assoc is
cleared only during peer delete. In case a key reinstallation
happens with the same peer, the same fragment cache with old
fragments added before key installation could be clubbed
with fragments received after. This might be exploited
to mix fragments of different data resulting in a proper
unintended reassembled packet to be passed up the stack.
Hence flush the fragment cache on every key installation to prevent
potential attacks (CVE-2020-24587).
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01734-QCAHKSWPL_SILICONZ-1 v2
Cc: stable@vger.kernel.org
Signed-off-by: Sriram R <srirrama@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Link: https://lore.kernel.org/r/20210511200110.218dc777836f.I9af6fc76215a35936c4152552018afb5079c5d8c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In certain scenarios a normal MSDU can be received as an A-MSDU when
the A-MSDU present bit of a QoS header gets flipped during reception.
Since this bit is unauthenticated, the hardware crypto engine can pass
the frame to the driver without any error indication.
This could result in processing unintended subframes collected in the
A-MSDU list. Hence, validate A-MSDU list by checking if the first frame
has a valid subframe header.
Comparing the non-aggregated MSDU and an A-MSDU, the fields of the first
subframe DA matches the LLC/SNAP header fields of a normal MSDU.
In order to avoid processing such frames, add a validation to
filter such A-MSDU frames where the first subframe header DA matches
with the LLC/SNAP header pattern.
Tested-on: QCA9984 hw1.0 PCI 10.4-3.10-00047
Cc: stable@vger.kernel.org
Signed-off-by: Sriram R <srirrama@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Link: https://lore.kernel.org/r/20210511200110.e6f5eb7b9847.I38a77ae26096862527a5eab73caebd7346af8b66@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
TKIP Michael MIC was not verified properly for PCIe cases since the
validation steps in ieee80211_rx_h_michael_mic_verify() in mac80211 did
not get fully executed due to unexpected flag values in
ieee80211_rx_status.
Fix this by setting the flags property to meet mac80211 expectations for
performing Michael MIC validation there. This fixes CVE-2020-26141. It
does the same as ath10k_htt_rx_proc_rx_ind_hl() for SDIO which passed
MIC verification case. This applies only to QCA6174/QCA9377 PCIe.
Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00110-QCARMSWP-1
Cc: stable@vger.kernel.org
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Link: https://lore.kernel.org/r/20210511200110.c3f1d42c6746.I795593fcaae941c471425b8c7d5f7bb185d29142@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When the discard flag is set by the firmware for an MPDU, it should be
dropped. This allows a mitigation for CVE-2020-24588 to be implemented
in the firmware.
Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00049
Cc: stable@vger.kernel.org
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Link: https://lore.kernel.org/r/20210511200110.11968c725b5c.Idd166365ebea2771c0c0a38c78b5060750f90e17@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Fragmentation is not used with multicast frames. Discard unexpected
fragments with multicast DA. This fixes CVE-2020-26145.
Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00049
Cc: stable@vger.kernel.org
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Link: https://lore.kernel.org/r/20210511200110.9ca6ca7945a9.I1e18b514590af17c155bda86699bc3a971a8dcf4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Fragmentation is not used with multicast frames. Discard unexpected
fragments with multicast DA. This fixes CVE-2020-26145.
Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00110-QCARMSWP-1
Cc: stable@vger.kernel.org
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Link: https://lore.kernel.org/r/20210511200110.5a0bd289bda8.Idd6ebea20038fb1cfee6de924aa595e5647c9eae@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
PN replay check for not fragmented frames is finished in the firmware,
but this was not done for fragmented frames when ath10k is used with
QCA6174/QCA6377 PCIe. mac80211 has the function
ieee80211_rx_h_defragment() for PN replay check for fragmented frames,
but this does not get checked with QCA6174 due to the
ieee80211_has_protected() condition not matching the cleared Protected
bit case.
Validate the PN of received fragmented frames within ath10k when CCMP is
used and drop the fragment if the PN is not correct (incremented by
exactly one from the previous fragment). This applies only for
QCA6174/QCA6377 PCIe.
Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00110-QCARMSWP-1
Cc: stable@vger.kernel.org
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Link: https://lore.kernel.org/r/20210511200110.9ba2664866a4.I756e47b67e210dba69966d989c4711ffc02dc6bc@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The function ib_modify_wq() is not used, so remove it.
Link: https://lore.kernel.org/r/c5e48d517b9163fe4f9ffd224050b83fdb3571c6.1620552935.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
This change fixes all of the arm64 issues we've had in the driver.
ARM support is provided in svga version 3, for which support we've added
in previous changes. svga version 3 currently lacks many of the
advanced features (in particular 3D support is lacking) but
that will change in time.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210505035740.286923-7-zackr@vmware.com
|
|
SVGA3 is the next version of our PCI device. Some of the changes
include using MMIO for register accesses instead of ioports,
deprecating the FIFO MMIO and removing a lot of the old and
legacy functionality. SVGA3 doesn't support guest backed
objects right now so everything except 3D is working.
v2: Fixes all the static analyzer warnings
Signed-off-by: Zack Rusin <zackr@vmware.com>
Cc: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210505191007.305872-1-zackr@vmware.com
|
|
Now since Christian reworked TTM to always keep objects on the LRU
list unless they are pinned we shouldn't need the reservation
semaphore. It makes the driver code a lot cleaner, especially
because it was a little hard to reason when and where the
reservation semaphore needed to be held.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210505035740.286923-5-zackr@vmware.com
|
|
In cases where the dirty linear memory range spans multiple sample sheets
in a surface, the dirty surface region is incorrectly computed.
To do this correctly and in an optimized fashion we would have to compute
the dirty region of each sample sheet and compute the union of those
regions.
But assuming that cpu writing to a multisample surface is rather a corner
case than a common case, just set the dirty region to the full surface.
This fixes OpenGL piglit errors with SVGA_FORCE_COHERENT=1
and the piglit test:
fbo-depthstencil blit default_fb -samples=2 -auto
Fixes: 9ca7d19ff8ba ("drm/vmwgfx: Add surface dirty-tracking callbacks")
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210505035740.286923-4-zackr@vmware.com
|
|
The SVGA3dCmdDXGenMips command uses a shader-resource view to access
the underlying surface. Normally accesses using that view-type are not
dirtying the underlying surface, but that particular command is an
exception.
Mark the surface gpu-dirty after a SVGA3dCmdDXGenMips command has been
submitted.
This fixes the piglit getteximage-formats test run with
SVGA_FORCE_COHERENT=1
Fixes: a9f58c456e9d ("drm/vmwgfx: Be more restrictive when dirtying resources")
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210505035740.286923-3-zackr@vmware.com
|
|
SVGA_REG_ENABLE is a register name, and SVGA_REG_ENABLE_(ENABLE|
DISABLE|HIDE) are its valid values. We were incorrectly setting
the register value to itself. This happened to work because
the SVGA_REG_ENABLE is happens to to be the same value as
SVGA_REG_ENABLE_ENABLE, but is still semantically incorrect.
Lets use the correct enum when setting SVGA_REG_ENABLE.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210505035740.286923-2-zackr@vmware.com
|
|
Variable 'ret' is set to -ENOMEM but this value is never read as it is
overwritten with a new value later on, hence it is a redundant assignment
and can be removed
In 'commit b79fafac70fc ("target: make queue_tm_rsp() return void")'
srpt_queue_response() has been changed to return void, so after "goto
out", there is no need to return ret.
Clean up the following clang-analyzer warning:
drivers/infiniband/ulp/srpt/ib_srpt.c:2860:3: warning: Value stored to
'ret' is never read [clang-analyzer-deadcode.DeadStores]
Fixes: b99f8e4d7bcd ("IB/srpt: convert to the generic RDMA READ/WRITE API")
Link: https://lore.kernel.org/r/1620296105-121964-1-git-send-email-yang.lee@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Variable 'ret' is set to the rerurn value of function
mlx5_mr_cache_alloc() but this value is never read as it is overwritten
with a new value later on, hence it is a redundant assignment and can be
removed
Clean up the following clang-analyzer warning:
drivers/infiniband/hw/mlx5/odp.c:421:2: warning: Value stored to 'ret' is never read [clang-analyzer-deadcode.DeadStores]
Fixes: e6fb246ccafb ("RDMA/mlx5: Consolidate MR destruction to mlx5_ib_dereg_mr()")
Link: https://lore.kernel.org/r/1620296001-120406-1-git-send-email-yang.lee@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Host can send invalid commands and flood the target with error messages.
Demote the error message from pr_err() to pr_debug() in
nvmet_parse_fabrics_cmd() and nvmet_parse_connect_cmd().
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Use the helper nvmet_report_invalid_opcode() to report invalid opcode
so we can remove the duplicate code.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Host can send invalid commands and flood the target with error messages
for the discovery controller. Demote the error message from pr_err() to
pr_debug( in nvmet_parse_discovery_cmd().
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
When running some traffic and taking down the link on peer, a
retry counter exceeded error is received. This leads to
nvmet_rdma_error_comp which tried accessing the cq_context to
obtain the queue. The cq_context is no longer valid after the
fix to use shared CQ mechanism and should be obtained similar
to how it is obtained in other functions from the wc->qp.
[ 905.786331] nvmet_rdma: SEND for CQE 0x00000000e3337f90 failed with status transport retry counter exceeded (12).
[ 905.832048] BUG: unable to handle kernel NULL pointer dereference at 0000000000000048
[ 905.839919] PGD 0 P4D 0
[ 905.842464] Oops: 0000 1 SMP NOPTI
[ 905.846144] CPU: 13 PID: 1557 Comm: kworker/13:1H Kdump: loaded Tainted: G OE --------- - - 4.18.0-304.el8.x86_64 #1
[ 905.872135] RIP: 0010:nvmet_rdma_error_comp+0x5/0x1b [nvmet_rdma]
[ 905.878259] Code: 19 4f c0 e8 89 b3 a5 f6 e9 5b e0 ff ff 0f b7 75 14 4c 89 ea 48 c7 c7 08 1a 4f c0 e8 71 b3 a5 f6 e9 4b e0 ff ff 0f 1f 44 00 00 <48> 8b 47 48 48 85 c0 74 08 48 89 c7 e9 98 bf 49 00 e9 c3 e3 ff ff
[ 905.897135] RSP: 0018:ffffab601c45fe28 EFLAGS: 00010246
[ 905.902387] RAX: 0000000000000065 RBX: ffff9e729ea2f800 RCX: 0000000000000000
[ 905.909558] RDX: 0000000000000000 RSI: ffff9e72df9567c8 RDI: 0000000000000000
[ 905.916731] RBP: ffff9e729ea2b400 R08: 000000000000074d R09: 0000000000000074
[ 905.923903] R10: 0000000000000000 R11: ffffab601c45fcc0 R12: 0000000000000010
[ 905.931074] R13: 0000000000000000 R14: 0000000000000010 R15: ffff9e729ea2f400
[ 905.938247] FS: 0000000000000000(0000) GS:ffff9e72df940000(0000) knlGS:0000000000000000
[ 905.938249] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 905.950067] nvmet_rdma: SEND for CQE 0x00000000c7356cca failed with status transport retry counter exceeded (12).
[ 905.961855] CR2: 0000000000000048 CR3: 000000678d010004 CR4: 00000000007706e0
[ 905.961855] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 905.961856] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 905.961857] PKRU: 55555554
[ 906.010315] Call Trace:
[ 906.012778] __ib_process_cq+0x89/0x170 [ib_core]
[ 906.017509] ib_cq_poll_work+0x26/0x80 [ib_core]
[ 906.022152] process_one_work+0x1a7/0x360
[ 906.026182] ? create_worker+0x1a0/0x1a0
[ 906.030123] worker_thread+0x30/0x390
[ 906.033802] ? create_worker+0x1a0/0x1a0
[ 906.037744] kthread+0x116/0x130
[ 906.040988] ? kthread_flush_work_fn+0x10/0x10
[ 906.045456] ret_from_fork+0x1f/0x40
Fixes: ca0f1a8055be2 ("nvmet-rdma: use new shared CQ mechanism")
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
When handling passthru commands, for inline bio allocation we only
consider the transfer size. This works well when req->sg_cnt fits into
the req->inline_bvec, but it will result in the early return from
bio_add_hw_page() when req->sg_cnt > NVMET_MAX_INLINE_BVEC.
Consider an I/O of size 32768 and first buffer is not aligned to the
page boundary, then I/O is split in following manner :-
[ 2206.256140] nvmet: sg->length 3440 sg->offset 656
[ 2206.256144] nvmet: sg->length 4096 sg->offset 0
[ 2206.256148] nvmet: sg->length 4096 sg->offset 0
[ 2206.256152] nvmet: sg->length 4096 sg->offset 0
[ 2206.256155] nvmet: sg->length 4096 sg->offset 0
[ 2206.256159] nvmet: sg->length 4096 sg->offset 0
[ 2206.256163] nvmet: sg->length 4096 sg->offset 0
[ 2206.256166] nvmet: sg->length 4096 sg->offset 0
[ 2206.256170] nvmet: sg->length 656 sg->offset 0
Now the req->transfer_size == NVMET_MAX_INLINE_DATA_LEN i.e. 32768, but
the req->sg_cnt is (9) > NVMET_MAX_INLINE_BIOVEC which is (8).
This will result in early return in the following code path :-
nvmet_bdev_execute_rw()
bio_add_pc_page()
bio_add_hw_page()
if (bio_full(bio, len))
return 0;
Use previously introduced helper nvmet_use_inline_bvec() to consider
req->sg_cnt when using inline bio. This only affects nvme-loop
transport.
Fixes: dab3902b19a0 ("nvmet: use inline bio for passthru fast path")
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
When handling rw commands, for inline bio case we only consider
transfer size. This works well when req->sg_cnt fits into the
req->inline_bvec, but it will result in the warning in
__bio_add_page() when req->sg_cnt > NVMET_MAX_INLINE_BVEC.
Consider an I/O size 32768 and first page is not aligned to the page
boundary, then I/O is split in following manner :-
[ 2206.256140] nvmet: sg->length 3440 sg->offset 656
[ 2206.256144] nvmet: sg->length 4096 sg->offset 0
[ 2206.256148] nvmet: sg->length 4096 sg->offset 0
[ 2206.256152] nvmet: sg->length 4096 sg->offset 0
[ 2206.256155] nvmet: sg->length 4096 sg->offset 0
[ 2206.256159] nvmet: sg->length 4096 sg->offset 0
[ 2206.256163] nvmet: sg->length 4096 sg->offset 0
[ 2206.256166] nvmet: sg->length 4096 sg->offset 0
[ 2206.256170] nvmet: sg->length 656 sg->offset 0
Now the req->transfer_size == NVMET_MAX_INLINE_DATA_LEN i.e. 32768, but
the req->sg_cnt is (9) > NVMET_MAX_INLINE_BIOVEC which is (8).
This will result in the following warning message :-
nvmet_bdev_execute_rw()
bio_add_page()
__bio_add_page()
WARN_ON_ONCE(bio_full(bio, len));
This scenario is very hard to reproduce on the nvme-loop transport only
with rw commands issued with the passthru IOCTL interface from the host
application and the data buffer is allocated with the malloc() and not
the posix_memalign().
Fixes: 73383adfad24 ("nvmet: don't split large I/Os unconditionally")
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
nvme_init_identify and thus nvme_mpath_init can be called multiple
times and thus must not overwrite potentially initialized or in-use
fields. Split out a helper for the basic initialization when the
controller is initialized and make sure the init_identify path does
not blindly change in-use data structures.
Fixes: 0d0b660f214d ("nvme: add ANA support")
Reported-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
|
|
The lable "err1" does the same thing as the branch of copy_to_user()
failed in the function ucma_create_id(). Just jump to the label directly
to reduce duplicate code.
Link: https://lore.kernel.org/r/1620291106-3675-1-git-send-email-tanxiaofei@huawei.com
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Even in the case of heavy load, direct WQE can still be posted. The
hardware will decide whether to drop the DWQE or not. Thus, the limit
needs to be removed.
Fixes: 01584a5edcc4 ("RDMA/hns: Add support of direct wqe")
Link: https://lore.kernel.org/r/1619593950-29414-1-git-send-email-liweihang@huawei.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The usage of pm_runtime_resume_and_get() removed the need of a
temporary integer. So, drop it.
Fixes: 59f96244af94 ("media: exynos4-is: fix pm_runtime_get_sync() usage count")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Clocks requiring non-atomic contexts are supported by the generic clock
PM layer since commit 0bfa0820c274 ("PM: clk: make PM clock layer
compatible with clocks that must sleep"). That means we can have
SCMI-based clocks be managed by the SCMI power domain now.
Link: https://lore.kernel.org/r/5q88n947-pon-4940-3or6-s54o4r361o5s@onlyvoer.pbz
Tested-by: Dien Pham <dien.pham.ry@renesas.com>
Reviewed-by: Gaku Inami <gaku.inami.xh@renesas.com>
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Use SPI_MODE_X_MASK instead of open coded variant.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210510131217.49357-7-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use SPI_MODE_X_MASK instead of open coded variant.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210510131217.49357-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use SPI_MODE_X_MASK instead of open coded variant.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210510131217.49357-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use SPI_MODE_X_MASK instead of open coded variant.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210510131217.49357-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use SPI_MODE_X_MASK instead of open coded variant.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210510131217.49357-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use SPI_MODE_X_MASK instead of open coded variant.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210510131217.49357-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use SPI_MODE_X_MASK instead of open coded variant.
While at it, fix format specifier and drop explicit casting.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210510131217.49357-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When devm_ioremap_resource() fails, a clear enough error message will be
printed by its subfunction __devm_ioremap_resource(). The error
information contains the device name, failure cause, and possibly resource
information.
Therefore, remove the error printing here to simplify code and reduce the
binary size.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210511092923.4617-1-thunder.leizhen@huawei.com
|
|
When encoder validation of a display mode fails, retry with less bandwidth
heavy YCbCr420 color mode, if available. This enables some HDMI 1.4 setups
to support 4k60Hz output, which previously failed silently.
AMDGPU had nearly the exact same issue. This problem description is
therefore copied from my commit message of the AMDGPU patch.
On some setups, while the monitor and the gpu support display modes with
pixel clocks of up to 600MHz, the link encoder might not. This prevents
YCbCr444 and RGB encoding for 4k60Hz, but YCbCr420 encoding might still be
possible. However, which color mode is used is decided before the link
encoder capabilities are checked. This patch fixes the problem by retrying
to find a display mode with YCbCr420 enforced and using it, if it is
valid.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210510133349.14491-4-wse@tuxedocomputers.com
|
|
Couples the decission between RGB and YCbCr420 mode and the check if the
port clock can archive the required frequency. Other checks and
configuration steps that where previously done in between can also be done
before or after.
This allows for are cleaner implementation of retrying different color
encodings.
A slight change in behaviour occurs with this patch: If YCbCr420 is not
allowed but display is YCbCr420 only it no longer fails, but just prints
an error and tries to fallback on RGB.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210510133349.14491-3-wse@tuxedocomputers.com
|
|
Moves some checks that later will be performed 2 times to an own function.
This avoids duplicate code later on.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210510133349.14491-2-wse@tuxedocomputers.com
|
|
Backmerging to get v5.12 fixes. Requested for vmwgfx.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
The DCN3 guards were dropped a while ago, this one must have
snuck in in a merge or something.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The result of an expression consisting of a single relational operator is
already of the bool type and does not need to be evaluated explicitly.
No functional change.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The result of an expression consisting of a single relational operator is
already of the bool type and does not need to be evaluated explicitly.
No functional change.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
It is stored in dynamically allocated memory, so sysfs_bin_attr_init() must
be called to initialize it. (Note: "initialization" only sets the .attr.key
member in this struct; it does not change the value of any other members.)
Otherwise, when CONFIG_DEBUG_LOCK_ALLOC=y this message appears during boot:
BUG: key ffff9248900cd148 has not been registered!
Fixes: 9037246bb2da ("drm/amd/display: Add sysfs interface for set/get srm")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1586
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: David Ward <david.ward@gatech.edu>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Jonathan writes:
First set of IIO fixes for the 5.13 cycle
A couple of high priority core fixes and the usual bits scattered
across individual drivers.
core:
* Fix ioctl handler double free.
* Fix an accidental ABI change wrt to error codes when an IOCTL is not
supported.
gp2ap002:
* Runtime pm imbalance on error.
hid-sensors:
* Fix a Kconfig dependency issue in a particularly crazy config.
mpu3050:
* Fix wrong temperature calculation due to a type needing to be signed.
pulsedlight:
* Runtime pm imbalance on error.
tsl2583
* Fix a potential division by zero.
* tag 'iio-fixes-5.13a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: tsl2583: Fix division by a zero lux_val
iio: core: return ENODEV if ioctl is unknown
iio: core: fix ioctl handlers removal
iio: gyro: mpu3050: Fix reported temperature value
iio: hid-sensors: select IIO_TRIGGERED_BUFFER under HID_SENSOR_IIO_TRIGGER
iio: proximity: pulsedlight: Fix rumtime PM imbalance on error
iio: light: gp2ap002: Fix rumtime PM imbalance on error
|
José Roberto de Souza
Sriram R
Wen Gong
Leon Romanovsky
Zack Rusin
Thomas Hellstrom
Yang Li
Chaitanya Kulkarni
Michal Kalderon
Christoph Hellwig
Xiaofei Tan
Yixian Liu
Mauro Carvalho Chehab
Nicolas Pitre
Andy Shevchenko
Zhen Lei
Werner Sembach
Thomas Zimmermann
Alex Deucher
David Ward
Greg Kroah-Hartman