aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2021-04-12dmaengine: idxd: fix wq size store permission stateDave Jiang1-1/+1
WQ size can only be changed when the device is disabled. Current code allows change when device is enabled but wq is disabled. Change the check to detect device state. Fixes: c52ca478233c ("dmaengine: idxd: add configuration component of driver") Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/161782558755.107710.18138252584838406025.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-04-12drm/i915/display/vlv_dsi: Move panel_pwr_cycle_delay to next panel-onHans de Goede2-6/+20
Instead of sleeping panel_pwr_cycle_delay ms when turning the panel off, record the time it is turned off and if necessary wait any (remaining) time when the panel is turned on again. Also sleep the remaining time on shutdown, because on reboot the GOP will immediately turn on the panel again. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210325114823.44922-2-hdegoede@redhat.com
2021-04-12drm/i915/display/vlv_dsi: Do not skip panel_pwr_cycle_delay when disabling the panelHans de Goede1-2/+2
After the recently added commit fe0f1e3bfdfe ("drm/i915: Shut down displays gracefully on reboot"), the DSI panel on a Cherry Trail based Predia Basic tablet would no longer properly light up after reboot. I've managed to reproduce this without rebooting by doing: chvt 3; echo 1 > /sys/class/graphics/fb0/blank;\ echo 0 > /sys/class/graphics/fb0/blank Which rapidly turns the panel off and back on again. The vlv_dsi.c code uses an intel_dsi_msleep() helper for the various delays used for panel on/off, since starting with MIPI-sequences version >= 3 the delays are already included inside the MIPI-sequences. The problems exposed by the "Shut down displays gracefully on reboot" change, show that using this helper for the panel_pwr_cycle_delay is not the right thing to do. This has not been noticed until now because normally the panel never is cycled off and directly on again in quick succession. Change the msleep for the panel_pwr_cycle_delay to a normal msleep() call to avoid the panel staying black after a quick off + on cycle. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Fixes: fe0f1e3bfdfe ("drm/i915: Shut down displays gracefully on reboot") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210325114823.44922-1-hdegoede@redhat.com
2021-04-12usbip: vudc: fix missing unlock on error in usbip_sockfd_store()Ye Bin1-0/+2
Add the missing unlock before return from function usbip_sockfd_store() in the error handling case. Fixes: bd8b82042269 ("usbip: vudc synchronize sysfs code paths") Reported-by: Hulk Robot <hulkci@huawei.com> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Ye Bin <yebin10@huawei.com> Link: https://lore.kernel.org/r/20210408112305.1022247-1-yebin10@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-12dmaengine: idxd: fix opcap sysfs attribute outputDave Jiang1-1/+7
The operation capability register is 256bits. The current output only prints out the first 64bits. Fix to output the entire 256bits. The current code omits operation caps from IAX devices. Fixes: c52ca478233c ("dmaengine: idxd: add configuration component of driver") Reported-by: Lucas Van <lucas.van@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/161645624963.2003736.829798666998490151.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-04-12dmaengine: idxd: Fix clobbering of SWERR overflow bit on writebackDave Jiang1-1/+3
Current code blindly writes over the SWERR and the OVERFLOW bits. Write back the bits actually read instead so the driver avoids clobbering the OVERFLOW bit that comes after the register is read. Fixes: bfe1d56091c1 ("dmaengine: idxd: Init and probe for Intel data accelerators") Reported-by: Sanjay Kumar <sanjay.k.kumar@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/161352082229.3511254.1002151220537623503.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-04-12mmc: sdhci-pci-gli: Improve GL9763E L1 entry delay to increase battery lifeBen Chuang1-3/+3
For GL9763E, although there is the best performance at the maximum delay. Change the value to 20us in order to have better power consumption. This change may reduce the maximum performance by 10%. Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw> Link: https://lore.kernel.org/r/20210407093816.8863-1-benchuanggli@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-04-12mmc: moxart: Remove unused variable 'dma_time' and 'pio_time'Yang Li1-6/+4
Fixes the following W=1 kernel build warning(s): drivers/mmc/host/moxart-mmc.c:257:7: warning: variable ‘dma_time’ set but not used drivers/mmc/host/moxart-mmc.c:395:7: warning: variable ‘pio_time’ set but not used Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/1617357231-93064-1-git-send-email-yang.lee@linux.alibaba.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-04-12mmc: core: Use userland specified timeout value for eMMC sanitizeBean Huo3-4/+7
As the density increases, the 4-minute timeout value for sanitize is no longer feasible. At the same time, devices of different densities have different timeout values, which makes it difficult to use a common timeout value. Therefore, let's pass down the userland-specified sanitize timeout value so it can be used. Signed-off-by: Bean Huo <beanhuo@micron.com> Link: https://lore.kernel.org/r/20210402092432.25069-2-huobean@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-04-12Merge 5.12-rc7 into usb-nextGreg Kroah-Hartman158-636/+1448
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-12crypto: chelsio - Read rxchannel-id from firmwareAyush Sawal1-2/+17
The rxchannel id is updated by the driver using the port no value, but this does not ensure that the value is correct. So now rx channel value is obtained from etoc channel map value. Fixes: 567be3a5d227 ("crypto: chelsio - Use multiple txq/rxq per...") Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-04-11pata_ipx4xx_cf: Fix unsigned comparison with less than zeroJunlin Yang1-1/+1
The return from the call to platform_get_irq() is int, it can be a negative error code, however this is being assigned to an unsigned int variable 'irq', so making 'irq' an int, and change the position to keep the code format. ./drivers/ata/pata_ixp4xx_cf.c:168:5-8: WARNING: Unsigned expression compared with zero: irq > 0 Signed-off-by: Junlin Yang <yangjunlin@yulong.com> Link: https://lore.kernel.org/r/20210409135426.1773-1-angkery@163.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-11ata: ahci_tegra: call tegra_powergate_power_off only when PM domain is not presentSowjanya Komatineni1-2/+4
This patch adds check to call legacy power domain API tegra_powergate_power_off() only when PM domain is not present. Fixes: 868ed7311cd8 ("ata: ahci_tegra: Add AHCI support for Tegra186") Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/1617915315-13639-2-git-send-email-skomatineni@nvidia.com Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-11gdrom: fix compilation errorChaitanya Kulkarni1-1/+1
Use the right name for the struct request variable that removes the following compilation error :- make --silent --keep-going --jobs=8 O=/home/tuxbuild/.cache/tuxmake/builds/1/tmp ARCH=sh CROSS_COMPILE=sh4-linux-gnu- 'CC=sccache sh4-linux-gnu-gcc' 'HOSTCC=sccache gcc' In file included from /builds/linux/include/linux/scatterlist.h:9, from /builds/linux/include/linux/dma-mapping.h:10, from /builds/linux/drivers/cdrom/gdrom.c:16: /builds/linux/drivers/cdrom/gdrom.c: In function 'gdrom_readdisk_dma': /builds/linux/drivers/cdrom/gdrom.c:586:61: error: 'rq' undeclared (first use in this function) 586 | __raw_writel(page_to_phys(bio_page(req->bio)) + bio_offset(rq->bio), | ^~ Fixes: 1d2c82001a5f ("gdrom: support highmem") Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-11net: geneve: check skb is large enough for IPv4/IPv6 headerPhillip Potter1-0/+6
Check within geneve_xmit_skb/geneve6_xmit_skb that sk_buff structure is large enough to include IPv4 or IPv6 header, and reject if not. The geneve_xmit_skb portion and overall idea was contributed by Eric Dumazet. Fixes a KMSAN-found uninit-value bug reported by syzbot at: https://syzkaller.appspot.com/bug?id=abe95dc3e3e9667fc23b8d81f29ecad95c6f106f Suggested-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot+2e406a9ac75bb71d4b7a@syzkaller.appspotmail.com Signed-off-by: Phillip Potter <phil@philpotter.co.uk> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-11net: davicom: Fix regulator not turned off on failed probeChristophe JAILLET1-2/+4
When the probe fails, we must disable the regulator that was previously enabled. This patch is a follow-up to commit ac88c531a5b3 ("net: davicom: Fix regulator not turned off on failed probe") which missed one case. Fixes: 7994fe55a4a2 ("dm9000: Add regulator and reset support to dm9000") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-11net: ipa: add IPA v4.11 configuration dataAlex Elder4-1/+388
Add support for the SC7280 SoC, which includes IPA version 4.11. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-11net: ipa: add IPA v4.5 configuration dataAlex Elder5-4/+447
Add support for the SDX55 SoC, which includes IPA version 4.5. Starting with IPA v4.5, a few of the memory regions have a different number of "canary" values; update comments in the where the region identifers are defined to accurately reflect that. I'll note three differences in SDX55 versus the other two existing platforms (SDM845 and SC7180): - SDX55 uses a 32-bit Linux kernel - SDX55 has four interconnects rather than three - SDX55 uses IPA v4.5, which uses inline checksum offload Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-11net: ipa: disable checksum offload for IPA v4.5+Alex Elder1-0/+16
Checksum offload for IPA v4.5+ is implemented differently, using "inline" offload (which uses a common header format for both upload and download offload). The IPA hardware must be programmed to enable MAP checksum offload, but the RMNet driver is responsible for interpreting checksum metadata supplied with messages. Currently, the RMNet driver does not support inline checksum offload. This support is imminent, but until it is available, do not allow newer versions of IPA to specify checksum offload for endpoints. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-11ehea: add missing MODULE_DEVICE_TABLEQiheng Lin1-0/+1
This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Qiheng Lin <linqiheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-11veth: refine napi usagePaolo Abeni1-1/+22
After the previous patch, when enabling GRO, locally generated TCP traffic experiences some measurable overhead, as it traverses the GRO engine without any chance of aggregation. This change refine the NAPI receive path admission test, to avoid unnecessary GRO overhead in most scenarios, when GRO is enabled on a veth peer. Only skbs that are eligible for aggregation enter the GRO layer, the others will go through the traditional receive path. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-11veth: allow enabling NAPI even without XDPPaolo Abeni1-13/+116
Currently the veth device has the GRO feature bit set, even if no GRO aggregation is possible with the default configuration, as the veth device does not hook into the GRO engine. Flipping the GRO feature bit from user-space is a no-op, unless XDP is enabled. In such scenario GRO could actually take place, but TSO is forced to off on the peer device. This change allow user-space to really control the GRO feature, with no need for an XDP program. The GRO feature bit is now cleared by default - so that there are no user-visible behavior changes with the default configuration. When the GRO bit is set, the per-queue NAPI instances are initialized and registered. On xmit, when napi instances are available, we try to use them. Some additional checks are in place to ensure we initialize/delete NAPIs only when needed in case of overlapping XDP and GRO configuration changes. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-11veth: use skb_orphan_partial instead of skb_orphanPaolo Abeni1-1/+1
As described by commit 9c4c325252c5 ("skbuff: preserve sock reference when scrubbing the skb."), orphaning a skb in the TX path will cause OoO. Let's use skb_orphan_partial() instead of skb_orphan(), so that we keep the sk around for queue's selection sake and we still avoid the problem fixed with commit 4bf9ffa0fb57 ("veth: Orphan skb before GRO") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-11phy: sfp: add netlink SFP support to generic SFP codeAndrew Lunn3-0/+48
The new netlink API for reading SFP data requires a new op to be implemented. The idea of the new netlink SFP code is that userspace is responsible to parsing the EEPROM data and requesting pages, rather than have the kernel decide what pages are interesting and returning them. This allows greater flexibility for newer formats. Currently the generic SFP code only supports simple SFPs. Allow i2c address 0x50 and 0x51 to be accessed with page and bank must always be 0. This interface will later be extended when for example QSFP support is added. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Vladyslav Tarasiuk <vladyslavt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-11net/mlx5: Add support for DSFP module EEPROM dumpsVladyslav Tarasiuk1-0/+2
Allow the driver to recognise DSFP transceiver module ID and therefore allow its EEPROM dumps using ethtool. Signed-off-by: Vladyslav Tarasiuk <vladyslavt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-11net/mlx5: Implement get_module_eeprom_by_page()Vladyslav Tarasiuk2-0/+85
Implement ethtool_ops::get_module_eeprom_by_page() to enable support of new SFP standards. Signed-off-by: Vladyslav Tarasiuk <vladyslavt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-11net/mlx5: Refactor module EEPROM queryVladyslav Tarasiuk1-34/+45
Prepare for ethtool_ops::get_module_eeprom_data() implementation by extracting common part of mlx5_query_module_eeprom() into a separate function. Signed-off-by: Vladyslav Tarasiuk <vladyslavt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-12mt76: mt7921: fix the dwell time controlSean Wang1-1/+2
dwell time for the scan is not configurable according to the current firmware submitted into linux-firmware.git, so leave the dwell time 0 to indicate the dwell time always determined by the firmware. Fixes: 399090ef9605 ("mt76: mt76_connac: move hw_scan and sched_scan routine in mt76_connac_mcu module") Suggested-by: Soul Huang <Soul.Huang@mediatek.com> Co-developed-by: YN Chen <YN.Chen@mediatek.com> Signed-off-by: YN Chen <YN.Chen@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7921: fix inappropriate WoW setup with the missing ARP informaitonSean Wang3-0/+50
Fix the Wake-on-WoWLAN failure should rely on ARP Information is being updated in time to the firmware. Fixes: ffa1bf97425b ("mt76: mt7921: introduce PM support") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7921: introduce MT_WFDMA_DUMMY_CR definitionLorenzo Bianconi3-2/+8
Introduce MT_WFDMA_DUMMY_CR definition and remove magic numbers Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7915: add wifi subsystem resetRyder Lee3-16/+70
Reset wifi subsystem when MCU is already running. Fixes firmware download failure after soft reboot on systems where the PCIe reset could not be performed properly. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Co-developed-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7915: fix mt7915_mcu_add_beaconRyder Lee1-10/+12
ieee80211_beacon_get_template() returns NULL when beacon state is disabled. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7615: fix .add_beacon_offload()Ryder Lee1-2/+10
ieee80211_beacon_get_template() returns NULL when beacon state is disabled, so beacon_offload cannot be disabled for some devices. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7921: rework mt7921_mcu_debug_msg_event routineLorenzo Bianconi1-14/+12
Rework mt7921_mcu_debug_msg_event routing removing unnecessary assignments and relying on wiphy_info Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7921: always wake the device in mt7921_remove_interfaceLorenzo Bianconi1-1/+1
Make sure the mcu is not in sleep mode before sending mcu messages in mt7921_remove_interface routine. Fixes: 1d8efc741df80 ("mt76: mt7921: introduce Runtime PM support") Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Co-developed-by: Leon Yen <leon.yen@mediatek.com> Signed-off-by: Leon Yen <leon.yen@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7921: fix key set/delete issueLorenzo Bianconi1-8/+17
Similar to the mt7915 driver, deleting a key with the previous key index deletes the current key. Rework the code to better keep track of multiple keys and check for the key index before deleting the current key Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7915: fix txpower init for TSSI off chipsShayne Chen1-6/+13
Fix incorrect txpower init value for TSSI off chips which causes too small txpower. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7615: remove redundant dev_err call in mt7622_wmac_probe()Guobin Huang1-3/+1
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Guobin Huang <huangguobin4@huawei.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7915: limit firmware log message printk to buffer lengthFelix Fietkau1-1/+2
Avoid including garbage from previous rx data Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7615: limit firmware log message printk to buffer lengthFelix Fietkau1-1/+2
Avoid including garbage from previous rx data Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7615: fix chip reset on MT7622 and MT7663eFelix Fietkau7-181/+187
After chip reset, the DMA scheduler needs to be initialized as well. Since the code is PCI/SoC specific, move it to pci_mac.c, so that it can depend on a function in dma.c Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7915: cleanup mcu tx queue in mt7915_dma_reset()Ryder Lee1-7/+8
Cleanup mcu queues in mt7915_mac_reset_work(). Fixes: e637763b606b ("mt76: move mcu queues to mt76_dev q_mcu array") Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7915: keep mcu_add_bss_info enabled till interface removalRyder Lee1-4/+5
The same as mt7615. Keep BSS_INFO_BASIC enabled throughout interfaces life cycle. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7615: keep mcu_add_bss_info enabled till interface removalRyder Lee1-6/+7
BSS_INFO_BASIC is never called alone with inactive state, which always follows beacon offload disable, so keep it enabled throughout interfaces life cycle. Inactive state also removes sta record of all connected stations, thurs causes connection lost which defeats the purpose of CSA. Lastly, this is especially an unexpected behavior that keeping mt7622 failing beacon buffer recyled when scanning channels. bss_conf change is updated with active state only, so just overwrite it. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7622: trigger hif interrupt for system resetRyder Lee3-4/+15
hif interrupt needs to be triggered after MT_MCU_INT_EVENT. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7615: cleanup mcu tx queue in mt7615_dma_reset()Ryder Lee1-3/+5
With this patch, mt7615_mac_reset_work() can recover system back. Fixes: e637763b606b ("mt76: move mcu queues to mt76_dev q_mcu array") Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7615: only enable DFS test knobs for mt7615Ryder Lee1-12/+17
DFS knobs should not be visible to non-DFS devices. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7921: properly configure rcpi adding a sta to the fwLorenzo Bianconi3-5/+49
Properly configure rcpi based on association process rssi. rcpi is used by rate controller embedded into the fw to initialize amsdu size. Tested-by: Jayden.Kuo <jayden.kuo@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: connac: introduce mt76_sta_cmd_info data structureLorenzo Bianconi4-30/+56
Introduce mt76_sta_cmd_info data structure to contain parameters passed to mt76_sta_cmd_info routine. This is preliminary patch to properly configure rcpi for mt7921 devices. Tested-by: Jayden.Kuo <jayden.kuo@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7921: get rid of mt7921_mac_wtbl_lmac_addrLorenzo Bianconi1-9/+1
Get rid of mt7921_mac_wtbl_lmac_addr routine since mt7921 wtbl size is 19 entries Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.