| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Currently, the queue reset process needs to be performed one by
one, which is inefficient. However, the queue reset of the same
function is always performed at the same time. Therefore, according
to the UM, command HCLGE_OPC_CFG_RST_TRIGGER can be used to reset
all queues of the same function at a time, in order to optimize
the queue reset process.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, if user hasn't change channel number, the rss_size
is limited to be no more than the vector number, in order to
keep one vector only being mapped to one queue. But the queue
number of each tc can be different, and one vector also can
be mapped by multiple queues. So remove this limitation.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The array size of bd_num_list is a fixed value, it may have potential
overflow risk when array size of hclge_dfx_bd_offset_list is greater
than that fixed value. So modify bd_num_list as a pointer and allocate
memory for it according to array size of hclge_dfx_bd_offset_list.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When new rule state is TO_ADD or ACTIVE, and there is already a
rule with same location in the fd_rule_list, the new rule will
be freed after modifying the old rule. It may cause user-after-free
issue when access rule again in hclge_add_fd_entry_common().
Fixes: fc4243b8de8b ("net: hns3: refactor flow director configuration")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, when adding flow director rule, it missed to set
rule state. Which may cause the rule state in software is
unconsistent with hardware.
Fixes: fc4243b8de8b ("net: hns3: refactor flow director configuration")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is a error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Guobin Huang <huangguobin4@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is a error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Guobin Huang <huangguobin4@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is a error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Guobin Huang <huangguobin4@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is a error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Guobin Huang <huangguobin4@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add selftests to test the POT stride padding functionality added in the
previous patch.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-25-imre.deak@intel.com
|
|
An upcoming platform has a restriction that the FB stride must be
power-of-two aligned. To support framebuffer layouts that are not in
this layout add a logic that pads the tile rows to the POT aligned size.
The HW won't read the padding PTEs, so these don't have to point to an
allocated address, or even have their valid flag set. So use a NULL PTE
instead for instance the scratch page, which is simple and keeps the SG
table compact.
v2:
- Simplify plane_view_dst_stride(). (Ville)
- Pass pitch_tiles as unsigned int.
v3:
- Drop unintentional s/plane_state->rotation/plane_config->rotation/
change.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-24-imre.deak@intel.com
|
|
An upcoming patch adds a new dst_stride field to the
intel_remapped_plane_info struct, so for clarity rename the current
stride field to src_stride.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-23-imre.deak@intel.com
|
|
Always use the modified copy of the intel_remapped_plane_info variables.
An upcoming patch updates the dst_stride field in these copies after
which we can't use the original versions.
v2: Init view in igt_vma_rotate_remap() when declaring it. (Ville)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-22-imre.deak@intel.com
|
|
Save some place in the GTT VMAs by using a u16 instead of unsigned int
to store the view dimensions. The maximum FB stride is 256kB which is
4096 tiles in the worst case (yf-tiles), the maximum FB height is 16k
pixels, which is 16384 tiles in the worst case (linear 4x1 tiled FB).
v2:
- Fix worst case tile height formula in commit log. (Ville)
- Add an assign_chk_ovf helper to simplify the related assignments.
v3:
- Enclose params of the assign_chk_ovf macro in parentheses.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-21-imre.deak@intel.com
|
|
Factor out to a new function the logic to calculate the FB remapping
parameters both during creating the FB and when flipping to it.
v2:
- Keep stride next to offset calculation. (Ville)
- Enclose check_array_bounds macro arguments in parentheses.
v3:
- Rebase on top of the struct intel_fb_view refactoring.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-20-imre.deak@intel.com
|
|
Instead of copying separately the GTT remapped and color plane view info
from the FB to the plane state, do this by copying the whole
intel_fb_view struct. For this we make sure the FB view state is fully
inited (that is also including the view type) already during FB
creation, so this init is not required during atomic check time. This
also means the we don't need to reset the unused color plane info during
atomic check, as these are already reset during FB creation.
I noticed that initial FBs will only work atm if they are page aligned
(which BIOS most probably always ensures), but add a comment to sanitize
this part once. Also we won't disable the plane if
get_initial_plane_config() failed for some reason (for instance due to
unsupported rotation), add a TODO: comment for this too.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-19-imre.deak@intel.com
|
|
Instead of special casing getting the pitch for the normal view, store
it during FB creation to the FB normal view struct and retrieve it from
there during atomic check, as it's done for the rotated view. A
follow-up patch does the same for a new FB remapped view.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-18-imre.deak@intel.com
|
|
To allow the simplification of FB/plane view computation in the
follow-up patches, unify the corresponding state in the
intel_framebuffer and intel_plane_state structs into a new intel_fb_view
struct.
This adds some overhead to intel_framebuffer as the rotated view will
have now space for 4 color planes instead of the required 2 and it'll
also contain the unused offset for each color_plane info. Imo this is an
acceptable trade-off to get a simplified way of the remap computation.
Use the new intel_fb_view struct for the FB normal view as well, so (in
the follow-up patches) we can remove the special casing for normal view
calculation wrt. the calculation of remapped/rotated views. This also
adds an overhead to the intel_framebuffer struct, as the gtt remap info
and per-color plane offset/pitch is not required for the normal view,
but imo this is an acceptable trade-off as above. The per-color plane
pitch filed will be used by a follow-up patch, so we can retrieve the
pitch for each view in the same way.
No functional changes in this patch.
v2:
- Make the patch have _no functional change_.
(fix skl_check_nv12_aux_surface() and skl_check_main_surface()).
- s/i915_color_plane_view::pitch/stride/ (Ville)
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-17-imre.deak@intel.com
|
|
Factor out to a new function the logic to calculate an FB plane's
normal-view size.
Instead of using intel_remapped_plane_info, which is related only to
remapping, add a helper to get the tile pitch and rows for an FB plane,
so these helpers can be used both by the normal size calculation and the
remapping code.
Also add a new fb_plane_view_dims struct in which we can pass around the
view (either FB plane or plane source) and tile dimensions conveniently
to functions calculating further view parameters.
v2:
- Add back the +1 tile adjustment for x!=0 in calc_plane_normal_size(). (Ville)
- s/pages/tiles/ in calc_plane_normal_size(). (Ville)
- Add a helper for the plane view width calculation. (Ville)
- Return tiles as unsigned int from calc_plane_normal_size().
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-16-imre.deak@intel.com
|
|
Factor out to a new function the logic to convert the FB plane x/y
values to a tile size based offset and new x/y relative to this offset.
This makes intel_fill_fb_info() and intel_plane_remap_gtt() somewhat
more readable.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-15-imre.deak@intel.com
|
|
Factor out to a new function the logic to convert the FB plane offset to
x/y and check the validity of x/y, with the goal to make
intel_fill_fb_info() more readable.
v2: Use &fb->base instead of a drm_fb alias. (Ville)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-14-imre.deak@intel.com
|
|
Rename dev_priv to i915 in the intel_fb.[ch] files.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-13-imre.deak@intel.com
|
|
After the previous patch we can unexport intel_fb_check_stride(), which
isn't needed by intel_display.c.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-12-imre.deak@intel.com
|
|
Move the FB plane specific functions from intel_display.c to intel_fb.c.
There's more functions like this, but I leave moving those as well for a
follow up, and for now moving only the ones needed by the end of this
patchset (adding support for padding tile-rows in an FB GGTT view).
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-11-imre.deak@intel.com
|
|
Move the FB plane specific function from intel_sprite.c to intel_fb.c
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-10-imre.deak@intel.com
|
|
Move is_surface_linear() to intel_fb.c and export it from here, also
removing the duplicate definitions of it.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-9-imre.deak@intel.com
|
|
Move the FB plane related functions from skl_universal_plane.c to
intel_fb.c.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-8-imre.deak@intel.com
|
|
Start collecting all the FB plane related functions into a new intel_fb.c
file.
v2: Drop display/ part of header includes. (Ville)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-7-imre.deak@intel.com
|
|
This probably doesn't cause an issue, since the code checks the view
type dependent size of the views before comparing them, but let's follow
the practice to bzero the whole struct when initializing it.
v2: Use {} instead of { } struct intializer. (Ville)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-6-imre.deak@intel.com
|
|
This probably doesn't cause an issue, since the code checks the view
type dependent size of the views before comparing them, but let's follow
the practice to bzero the whole struct when initializing it.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-5-imre.deak@intel.com
|
|
The expected/found values were swapped in a debug message, fix this up.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-4-imre.deak@intel.com
|
|
An inner scope version of err shadows the variable in the outer scope,
and err doesn't get set after a failure, fix these.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-3-imre.deak@intel.com
|
|
The HW plane state is cleared and inited after we store the rotation to
it, so store it instead to the uapi state to match what we do with all
other plane state until intel_plane_copy_uapi_to_hw_state() is called.
Rotation for initial FBs is not supported atm, but let's still fix the
plane state setup here.
While at it remove the redundant intel_state->uapi.src/dst init, which
will be done in intel_plane_copy_uapi_to_hw_state().
v2: Remove redundant intel_state->uapi.src/dst init. (Ville)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-2-imre.deak@intel.com
|
|
struct drm_i915_private, struct intel_crtc_state and
struct intel_crtc is declared twice.
Remove the duplicate.
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210326012527.875026-1-wanjiabing@vivo.com
|
|
Pointers should be cast with uintptr_t instead of integer. This fixes
warning when compile testing on ARM64:
drivers/clk/socfpga/clk-gate.c: In function ‘socfpga_clk_recalc_rate’:
drivers/clk/socfpga/clk-gate.c:102:7: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
Fixes: b7cec13f082f ("clk: socfpga: Look for the GPIO_DB_CLK by its offset")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20210314110709.32599-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/of/base.c:1781: warning: Function parameter or member 'prop' not described in '__of_add_property'
drivers/of/base.c:1781: warning: Excess function parameter 'prob' description in '__of_add_property'
drivers/of/base.c:1804: warning: Function parameter or member 'prop' not described in 'of_add_property'
drivers/of/base.c:1804: warning: Excess function parameter 'prob' description in 'of_add_property'
drivers/of/base.c:1855: warning: Function parameter or member 'prop' not described in 'of_remove_property'
drivers/of/base.c:1855: warning: Excess function parameter 'prob' description in 'of_remove_property'
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: devicetree@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210329152435.900225-1-lee.jones@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Offset calculation wasn't correct as start addresses are in pfn
not in bytes.
CC: stable@vger.kernel.org
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Correct the check for vblank short.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
The pointers adapter and phydev are being initialized with values that
are never read and are being updated later with a new value. The
initialization is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When ice_remove_vsi_lkup_fltr is called, by calling
ice_add_to_vsi_fltr_list local copy of vsi filter list
is created. If any issues during creation of vsi filter
list occurs it up for the caller to free already
allocated memory. This patch ensures proper memory
deallocation in these cases.
Fixes: 80d144c9ac82 ("ice: Refactor switch rule management structures and functions")
Signed-off-by: Robert Malz <robertx.malz@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
As per the spec, the WoL control word read from the NVM should be
interpreted as port numbers, and not PF numbers. So when checking
if WoL supported, use the port number instead of the PF ID.
Also, ice_is_wol_supported doesn't really need a pointer to the pf
struct, but just needs a pointer to the hw instance.
Fixes: 769c500dcc1e ("ice: Add advanced power mgmt for WoL")
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add handling of allocation fault for ice_vsi_list_map_info.
Also *fi should not be NULL pointer, it is a reference to raw
data field, so remove this variable and use the reference
directly.
Fixes: 9daf8208dd4d ("ice: Add support for switch filter programming")
Signed-off-by: Jacek Bułatek <jacekx.bulatek@intel.com>
Co-developed-by: Haiyue Wang <haiyue.wang@intel.com>
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The original purpose of the ICE_DCBNL_DEVRESET was to protect
the driver during DCBNL device resets. But, the flow for
DCBNL device resets now consists of only calls up the stack
such as dev_close() and dev_open() that will result in NDO calls
to the driver. These will be handled with state changes from the
stack. Also, there is a problem of the dev_close and dev_open
being blocked by checks for reset in progress also using the
ICE_DCBNL_DEVRESET bit.
Since the ICE_DCBNL_DEVRESET bit is not necessary for protecting
the driver from DCBNL device resets and it is actually blocking
changes coming from the DCBNL interface, remove the bit from the
PF state and don't block driver function based on DCBNL reset in
progress.
Fixes: b94b013eb626 ("ice: Implement DCBNL support")
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
pm_runtime_put_suppliers() must not decrement rpm_active unless the
consumer is suspended. That is because, otherwise, it could suspend
suppliers for an active consumer.
That can happen as follows:
static int driver_probe_device(struct device_driver *drv, struct device *dev)
{
int ret = 0;
if (!device_is_registered(dev))
return -ENODEV;
dev->can_match = true;
pr_debug("bus: '%s': %s: matched device %s with driver %s\n",
drv->bus->name, __func__, dev_name(dev), drv->name);
pm_runtime_get_suppliers(dev);
if (dev->parent)
pm_runtime_get_sync(dev->parent);
At this point, dev can runtime suspend so rpm_put_suppliers() can run,
rpm_active becomes 1 (the lowest value).
pm_runtime_barrier(dev);
if (initcall_debug)
ret = really_probe_debug(dev, drv);
else
ret = really_probe(dev, drv);
Probe callback can have runtime resumed dev, and then runtime put
so dev is awaiting autosuspend, but rpm_active is 2.
pm_request_idle(dev);
if (dev->parent)
pm_runtime_put(dev->parent);
pm_runtime_put_suppliers(dev);
Now pm_runtime_put_suppliers() will put the supplier
i.e. rpm_active 2 -> 1, but consumer can still be active.
return ret;
}
Fix by checking the runtime status. For any status other than
RPM_SUSPENDED, rpm_active can be considered to be "owned" by
rpm_[get/put]_suppliers() and pm_runtime_put_suppliers() need do nothing.
Reported-by: Asutosh Das <asutoshd@codeaurora.org>
Fixes: 4c06c4e6cf63 ("driver core: Fix possible supplier PM-usage counter imbalance")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: 5.1+ <stable@vger.kernel.org> # 5.1+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
rpm_active indicates how many times the supplier usage_count has been
incremented. Consequently it must be updated after pm_runtime_get_sync() of
the supplier, not before.
Fixes: 4c06c4e6cf63 ("driver core: Fix possible supplier PM-usage counter imbalance")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: 5.1+ <stable@vger.kernel.org> # 5.1+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The following problem has been reported by George Kennedy:
Since commit 7fef431be9c9 ("mm/page_alloc: place pages to tail
in __free_pages_core()") the following use after free occurs
intermittently when ACPI tables are accessed.
BUG: KASAN: use-after-free in ibft_init+0x134/0xc49
Read of size 4 at addr ffff8880be453004 by task swapper/0/1
CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.12.0-rc1-7a7fd0d #1
Call Trace:
dump_stack+0xf6/0x158
print_address_description.constprop.9+0x41/0x60
kasan_report.cold.14+0x7b/0xd4
__asan_report_load_n_noabort+0xf/0x20
ibft_init+0x134/0xc49
do_one_initcall+0xc4/0x3e0
kernel_init_freeable+0x5af/0x66b
kernel_init+0x16/0x1d0
ret_from_fork+0x22/0x30
ACPI tables mapped via kmap() do not have their mapped pages
reserved and the pages can be "stolen" by the buddy allocator.
Apparently, on the affected system, the ACPI table in question is
not located in "reserved" memory, like ACPI NVS or ACPI Data, that
will not be used by the buddy allocator, so the memory occupied by
that table has to be explicitly reserved to prevent the buddy
allocator from using it.
In order to address this problem, rearrange the initialization of the
ACPI tables on x86 to locate the initial tables earlier and reserve
the memory occupied by them.
The other architectures using ACPI should not be affected by this
change.
Link: https://lore.kernel.org/linux-acpi/1614802160-29362-1-git-send-email-george.kennedy@oracle.com/
Reported-by: George Kennedy <george.kennedy@oracle.com>
Tested-by: George Kennedy <george.kennedy@oracle.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: 5.10+ <stable@vger.kernel.org> # 5.10+
|
|
Fix the order of number of array members and member size parameters in a
*calloc() call.
Fixes: b3c3890489f6 ("ice: avoid unnecessary single-member variable-length structs")
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
There is a possibility of race between ice_open or ice_stop calls
performed by OS and reset handling routine both trying to modify VSI
resources. Observed scenarios:
- reset handler deallocates memory in ice_vsi_free_arrays and ice_open
tries to access it in ice_vsi_cfg_txq leading to driver crash
- reset handler deallocates memory in ice_vsi_free_arrays and ice_close
tries to access it in ice_down leading to driver crash
- reset handler clears port scheduler topology and sets port state to
ICE_SCHED_PORT_STATE_INIT leading to ice_ena_vsi_txq fail in ice_open
To prevent this additional checks in ice_open and ice_stop are
introduced to make sure that OS is not allowed to alter VSI config while
reset is in progress.
Fixes: cdedef59deb0 ("ice: Configure VSIs for Tx/Rx")
Signed-off-by: Krzysztof Goreczny <krzysztof.goreczny@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
iSCSI can use both TCP ports 860 and 3260. However, in our current
implementation, the ice_aqc_opc_get_cee_dcb_cfg (0x0A07) AQ command
doesn't provide a way to communicate the protocol port number to the
AQ's caller. Thus, we assume that 3260 is the iSCSI port number at the
AQ's caller layer.
Rely on the dcbx-willing mode, desired QoS and remote QoS configuration to
determine which port number that iSCSI will use.
Fixes: 0ebd3ff13cca ("ice: Add code for DCB initialization part 2/4")
Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
250 msec timeout is insufficient for some AQ commands. Advice from FW
team was to increase the timeout. Increase to 1 second.
Fixes: 7ec59eeac804 ("ice: Add support for control queues")
Signed-off-by: Fabio Pricoco <fabio.pricoco@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
Yufeng Mo
Jian Shen
Guangbin Huang
Guobin Huang
Imre Deak
Wan Jiabing
Krzysztof Kozlowski
Lee Jones
Nirmoy Das
Evan Quan
Colin Ian King
Robert Malz
Anirudh Venkataramanan
Jacek Bułatek
Dave Ertman
Adrian Hunter
Rafael J. Wysocki
Bruce Allan
Krzysztof Goreczny
Chinh T Cao
Fabio Pricoco