aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2021-03-23drm/i915/dsc: fix DSS CTL register usage for ICL DSI transcodersJani Nikula1-8/+2
Use the correct DSS CTL registers for ICL DSI transcoders. As a side effect, this also brings back the sanity check for trying to use pipe DSC registers on pipe A on ICL. Fixes: 8a029c113b17 ("drm/i915/dp: Modify VDSC helpers to configure DSC for Bigjoiner slave") References: http://lore.kernel.org/r/87eegxq2lq.fsf@intel.com Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Animesh Manna <animesh.manna@intel.com> Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Cc: <stable@vger.kernel.org> # v5.11+ Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210319115333.8330-1-jani.nikula@intel.com (cherry picked from commit 5706d02871240fdba7ddd6ab1cc31672fc95a90f) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2021-03-23drm/i915: Fix enabled_planes bitmaskVille Syrjälä1-2/+3
The enabled_planes bitmask was supposed to track logically enabled planes (ie. fb!=NULL and crtc!=NULL), but instead we end up putting even disabled planes into the bitmask since intel_plane_atomic_check_with_state() only takes the early exit if the plane was disabled and stays disabled. I think I misread the early said codepath to exit whenever the plane is logically disabled, which is not true. So let's fix this up properly and set the bit only when the plane actually is logically enabled. Cc: Manasi Navare <manasi.d.navare@intel.com> Fixes: ee42ec19ca2e ("drm/i915: Track logically enabled planes for hw state") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210305153610.12177-2-ville.syrjala@linux.intel.com Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> (cherry picked from commit 97bc7ffa1b1e9a8672e0a8e9a96680b0c3717427) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2021-03-23drm/i915: Disable LTTPR support when the LTTPR rev < 1.4Imre Deak1-4/+10
By the specification the 0xF0000 - 0xF02FF range is only valid if the LTTPR revision at 0xF0000 is at least 1.4. Disable the LTTPR support otherwise. Fixes: 7b2a4ab8b0ef ("drm/i915: Switch to LTTPR transparent mode link training") Cc: <stable@vger.kernel.org> # v5.11 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210317184901.4029798-4-imre.deak@intel.com (cherry picked from commit 1663ad4936e0679443a315fe342f99636a2420dd) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2021-03-23drm/i915: Disable LTTPR support when the DPCD rev < 1.4Imre Deak3-15/+39
By the specification the 0xF0000-0xF02FF range is only valid when the DPCD revision is 1.4 or higher. Disable LTTPR support if this isn't so. Trying to detect LTTPRs returned corrupted values for the above DPCD range at least on a Skylake host with an LG 43UD79-B monitor with a DPCD revision 1.2 connected. v2: Add the actual version check. v3: Fix s/DRPX/DPRX/ typo. Fixes: 7b2a4ab8b0ef ("drm/i915: Switch to LTTPR transparent mode link training") Cc: <stable@vger.kernel.org> # v5.11 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210317190149.4032966-1-imre.deak@intel.com (cherry picked from commit 264613b406eb0d74cd9ca582c717c5e2c5a975ea) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2021-03-23drm/i915/ilk-glk: Fix link training on links with LTTPRsImre Deak2-3/+19
The spec requires to use at least 3.2ms for the AUX timeout period if there are LT-tunable PHY Repeaters on the link (2.11.2). An upcoming spec update makes this more specific, by requiring a 3.2ms minimum timeout period for the LTTPR detection reading the 0xF0000-0xF0007 range (3.6.5.1). Accordingly disable LTTPR detection until GLK, where the maximum timeout we can set is only 1.6ms. Link training in the non-transparent mode is known to fail at least on some SKL systems with a WD19 dock on the link, which exposes an LTTPR (see the References below). While this could have different reasons besides the too short AUX timeout used, not detecting LTTPRs (and so not using the non-transparent LT mode) fixes link training on these systems. While at it add a code comment about the platform specific maximum timeout values. v2: Add a comment about the g4x maximum timeout as well. (Ville) Reported-by: Takashi Iwai <tiwai@suse.de> Reported-and-tested-by: Santiago Zarate <santiago.zarate@suse.com> Reported-and-tested-by: Bodo Graumann <mail@bodograumann.de> References: https://gitlab.freedesktop.org/drm/intel/-/issues/3166 Fixes: b30edfd8d0b4 ("drm/i915: Switch to LTTPR non-transparent mode link training") Cc: <stable@vger.kernel.org> # v5.11 Cc: Takashi Iwai <tiwai@suse.de> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210317184901.4029798-2-imre.deak@intel.com (cherry picked from commit 984982f3ef7b240cd24c2feb2762d81d9d8da3c2) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2021-03-23USB: cdc-acm: downgrade message to debugOliver Neukum1-1/+2
This failure is so common that logging an error here amounts to spamming log files. Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com> Signed-off-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210311130126.15972-2-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23USB: cdc-acm: untangle a circular dependency between callback and softintOliver Neukum1-16/+32
We have a cycle of callbacks scheduling works which submit URBs with thos callbacks. This needs to be blocked, stopped and unblocked to untangle the circle. The issue leads to faults like: [ 55.068392] Unable to handle kernel paging request at virtual address 6b6b6c03 [ 55.075624] pgd = be866494 [ 55.078335] [6b6b6c03] *pgd=00000000 [ 55.081924] Internal error: Oops: 5 [#1] PREEMPT SMP ARM [ 55.087238] Modules linked in: ppp_async crc_ccitt ppp_generic slhc xt_TCPMSS xt_tcpmss xt_hl nf_log_ipv6 nf_log_ipv4 nf_log_common xt_policy xt_limit xt_conntrack xt_tcpudp xt_pkttype ip6table_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_mangle ip6table_filter ip6_tables iptable_filter ip_tables des_generic md5 sch_fq_codel cdc_mbim cdc_wdm cdc_ncm usbnet mii cdc_acm usb_storage ip_tunnel xfrm_user xfrm6_tunnel tunnel6 xfrm4_tunnel tunnel4 esp6 esp4 ah6 ah4 xfrm_algo xt_LOG xt_LED xt_comment x_tables ipv6 [ 55.134954] CPU: 0 PID: 82 Comm: kworker/0:2 Tainted: G T 5.8.17 #1 [ 55.142526] Hardware name: Freescale i.MX7 Dual (Device Tree) [ 55.148304] Workqueue: events acm_softint [cdc_acm] [ 55.153196] PC is at kobject_get+0x10/0xa4 [ 55.157302] LR is at usb_get_dev+0x14/0x1c [ 55.161402] pc : [<8047c06c>] lr : [<80560448>] psr: 20000193 [ 55.167671] sp : bca39ea8 ip : 00007374 fp : bf6cbd80 [ 55.172899] r10: 00000000 r9 : bdd92284 r8 : bdd92008 [ 55.178128] r7 : 6b6b6b6b r6 : fffffffe r5 : 60000113 r4 : 6b6b6be3 [ 55.184658] r3 : 6b6b6b6b r2 : 00000111 r1 : 00000000 r0 : 6b6b6be3 [ 55.191191] Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none [ 55.198417] Control: 10c5387d Table: bcf0c06a DAC: 00000051 [ 55.204168] Process kworker/0:2 (pid: 82, stack limit = 0x9bdd2a89) [ 55.210439] Stack: (0xbca39ea8 to 0xbca3a000) [ 55.214805] 9ea0: bf6cbd80 80769a50 6b6b6b6b 80560448 bdeb0500 8056bfe8 [ 55.222991] 9ec0: 00000002 b76da000 00000000 bdeb0500 bdd92448 bca38000 bdeb0510 8056d69c [ 55.231177] 9ee0: bca38000 00000000 80c050fc 00000000 bca39f44 09d42015 00000000 00000001 [ 55.239363] 9f00: bdd92448 bdd92438 bdd92000 7f1158c4 bdd92448 bca2ee00 bf6cbd80 bf6cef00 [ 55.247549] 9f20: 00000000 00000000 00000000 801412d8 bf6cbd98 80c03d00 bca2ee00 bf6cbd80 [ 55.255735] 9f40: bca2ee14 bf6cbd98 80c03d00 00000008 bca38000 80141568 00000000 80c446ae [ 55.263921] 9f60: 00000000 bc9ed880 bc9f0700 bca38000 bc117eb4 80141524 bca2ee00 bc9ed8a4 [ 55.272107] 9f80: 00000000 80147cc8 00000000 bc9f0700 80147b84 00000000 00000000 00000000 [ 55.280292] 9fa0: 00000000 00000000 00000000 80100148 00000000 00000000 00000000 00000000 [ 55.288477] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 55.296662] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [ 55.304860] [<8047c06c>] (kobject_get) from [<80560448>] (usb_get_dev+0x14/0x1c) [ 55.312271] [<80560448>] (usb_get_dev) from [<8056bfe8>] (usb_hcd_unlink_urb+0x50/0xd8) [ 55.320286] [<8056bfe8>] (usb_hcd_unlink_urb) from [<8056d69c>] (usb_kill_urb.part.0+0x44/0xd0) [ 55.329004] [<8056d69c>] (usb_kill_urb.part.0) from [<7f1158c4>] (acm_softint+0x4c/0x10c [cdc_acm]) [ 55.338082] [<7f1158c4>] (acm_softint [cdc_acm]) from [<801412d8>] (process_one_work+0x19c/0x3e8) [ 55.346969] [<801412d8>] (process_one_work) from [<80141568>] (worker_thread+0x44/0x4dc) [ 55.355072] [<80141568>] (worker_thread) from [<80147cc8>] (kthread+0x144/0x180) [ 55.362481] [<80147cc8>] (kthread) from [<80100148>] (ret_from_fork+0x14/0x2c) [ 55.369706] Exception stack(0xbca39fb0 to 0xbca39ff8) Tested-by: Bruno Thomsen <bruno.thomsen@gmail.com> Signed-off-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210311130126.15972-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23cdc-acm: fix BREAK rx code path adding necessary callsOliver Neukum1-1/+3
Counting break events is nice but we should actually report them to the tty layer. Fixes: 5a6a62bdb9257 ("cdc-acm: add TIOCMIWAIT") Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20210311133714.31881-1-oneukum@suse.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23usb: gadget: udc: amd5536udc_pci fix null-ptr-dereferenceTong Zhang1-5/+5
init_dma_pools() calls dma_pool_create(...dev->dev) to create dma pool. however, dev->dev is actually set after calling init_dma_pools(), which effectively makes dma_pool_create(..NULL) and cause crash. To fix this issue, init dma only after dev->dev is set. [ 1.317993] RIP: 0010:dma_pool_create+0x83/0x290 [ 1.323257] Call Trace: [ 1.323390] ? pci_write_config_word+0x27/0x30 [ 1.323626] init_dma_pools+0x41/0x1a0 [snps_udc_core] [ 1.323899] udc_pci_probe+0x202/0x2b1 [amd5536udc_pci] Fixes: 7c51247a1f62 (usb: gadget: udc: Provide correct arguments for 'dma_pool_create') Cc: stable <stable@vger.kernel.org> Signed-off-by: Tong Zhang <ztong0001@gmail.com> Link: https://lore.kernel.org/r/20210317230400.357756-1-ztong0001@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23usb: dwc3: pci: Enable dis_uX_susphy_quirk for Intel MerrifieldAndy Shevchenko1-0/+2
It seems that on Intel Merrifield platform the USB PHY shouldn't be suspended. Otherwise it can't be enabled by simply change the cable in the connector. Enable corresponding quirk for the platform in question. Fixes: e5f4ca3fce90 ("usb: dwc3: ulpi: Fix USB2.0 HS/FS/LS PHY suspend regression") Suggested-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210322125244.79407-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23usb: dwc3: gadget: Use max speed if unspecifiedThinh Nguyen1-1/+1
If the gadget driver doesn't specify a max_speed, then use the controller's maximum supported speed as default. For DWC_usb32 IP, the gadget's speed maybe limited to gen2x1 rate only if the driver's max_speed is unknown. This scenario should not occur with the current implementation since the default gadget driver's max_speed should always be specified. However, to make the driver more robust and help with readability, let's cover all the scenarios in __dwc3_gadget_set_speed(). Fixes: 450b9e9fabd8 ("usb: dwc3: gadget: Set speed only up to the max supported") Cc: <stable@vger.kernel.org> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/55ac7001af73bfe9bc750c6446ef4ac8cf6f9313.1615254129.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23usb: dwc3: gadget: Set gadget_max_speed when set ssp_rateThinh Nguyen1-0/+1
Set the dwc->gadget_max_speed to SuperSpeed Plus if the user sets the ssp_rate. The udc_set_ssp_rate() is intended for setting the gadget's speed to SuperSpeed Plus at the specified rate. Fixes: 072cab8a0fe2 ("usb: dwc3: gadget: Implement setting of SSP rate") Cc: <stable@vger.kernel.org> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/0b2732e2f380d9912ee87f39dc82c2139223bad9.1615254129.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23usb: dwc3: qcom: skip interconnect init for ACPI probeShawn Guo1-0/+3
The ACPI probe starts failing since commit bea46b981515 ("usb: dwc3: qcom: Add interconnect support in dwc3 driver"), because there is no interconnect support for ACPI, and of_icc_get() call in dwc3_qcom_interconnect_init() will just return -EINVAL. Fix the problem by skipping interconnect init for ACPI probe, and then the NULL icc_path_ddr will simply just scheild all ICC calls. Fixes: bea46b981515 ("usb: dwc3: qcom: Add interconnect support in dwc3 driver") Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210311060318.25418-1-shawn.guo@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23usb: core: sysfs: Check for SSP rate in speed attrThinh Nguyen1-1/+4
Check for usb_device->ssp_rate to output the signaling rate for genXxY. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/80a3214592b30da6ca95bb87984f2a9779de0b14.1615432770.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23usb: core: hub: Print speed name based on ssp rateThinh Nguyen1-3/+7
Check for usb_device->ssp_rate to print the SuperSpeed Plus signaling rate generation and lane count. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/df0986bbe92251c104dd92e3c796df7c4f2674ce.1615432770.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23usb: core: hub: Remove port_speed_is_ssp()Thinh Nguyen1-30/+1
The get_port_ssp_rate() can replace port_speed_is_ssp(). If the port speed is detected to be in gen2x1, gen1x2, or gen2x2, then the port is operating at SuperSpeed Plus. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/dfd61ae637597bad502d2420b4dbd3774fc76aab.1615432770.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23usb: core: Track SuperSpeed Plus GenXxYThinh Nguyen2-1/+83
Introduce ssp_rate field to usb_device structure to capture the connected SuperSpeed Plus signaling rate generation and lane count with the corresponding usb_ssp_rate enum. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/b7805d121e5ae4ad5ae144bd860b6ac04ee47436.1615432770.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23usb: dwc3: gadget: Ignore EP queue requests during bus resetWesley Cheng1-0/+9
The current dwc3_gadget_reset_interrupt() will stop any active transfers, but only addresses blocking of EP queuing for while we are coming from a disconnected scenario, i.e. after receiving the disconnect event. If the host decides to issue a bus reset on the device, the connected parameter will still be set to true, allowing for EP queuing to continue while we are disabling the functions. To avoid this, set the connected flag to false until the stop active transfers is complete. Signed-off-by: Wesley Cheng <wcheng@codeaurora.org> Link: https://lore.kernel.org/r/1616146285-19149-3-git-send-email-wcheng@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23usb: dwc3: gadget: Avoid continuing preparing TRBs during teardownWesley Cheng1-0/+5
Add checks similar to dwc3_gadget_ep_queue() before kicking off transfers after getting an endpoint completion event. Since cleaning up completed requests will momentarily unlock dwc->lock, there is a chance for a sequence like pullup disable to be executed. This can lead to preparing a TRB, which will be removed by the pullup disable routine. Signed-off-by: Wesley Cheng <wcheng@codeaurora.org> Link: https://lore.kernel.org/r/1616146285-19149-2-git-send-email-wcheng@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23USB: xhci: drop workaround for forced irq threadingJohan Hovold1-3/+2
Force-threaded interrupt handlers used to run with interrupts enabled, something which could lead to deadlocks in case a threaded handler shared a lock with code running in hard interrupt context (e.g. timer callbacks) and did not explicitly disable interrupts. Since commit 81e2073c175b ("genirq: Disable interrupts for force threaded handlers") interrupt handlers always run with interrupts disabled on non-RT so that drivers no longer need to do handle forced threading ("threadirqs"). Drop the now obsolete workaround added by commit 63aea0dbab90 ("USB: xhci: fix lock-inversion problem"). Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210322111140.32056-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23USB: gadget: legacy: remove left-over __ref annotationsRasmus Villemoes1-5/+5
These were added in commit 780cc0f370 ("usb: gadget: add '__ref' for rndis_config_register() and cdc_config_register()") to silence modpost, but they didn't fix the real problem - that was fixed later by removing wrong __init annotations in commit c94e289f195e ("usb: gadget: remove incorrect __init/__exit annotations"). It really never makes sense for a function to be marked __ref unless it (1) has some conditional that chooses whether to call an __init function (or access __initdata) or not and (2) has a comment explaining why the __ref is there and why it is safe. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Link: https://lore.kernel.org/r/20210323081607.405904-1-linux@rasmusvillemoes.dk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23usb: gadget: u_audio: convert to strscpyRuslan Bilovol1-3/+3
Usage of strlcpy in Linux Kernel has been recently deprecated [1], convert driver to strscpy [1] https://lore.kernel.org/lkml/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com> Link: https://lore.kernel.org/r/1614603943-11668-2-git-send-email-ruslan.bilovol@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23usb: gadget: f_uac1: disable IN/OUT ep if unusedRuslan Bilovol1-66/+163
User can configure f_uac1 function via p_chmask/c_chmask whether uac1 shall support playback and/or capture, but it has only effect on the created ALSA device, but not on the USB descriptor. This patch adds playback/capture descriptors dependent on that parameter. It is similar to the same conversion done earlier for f_uac2 Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com> Link: https://lore.kernel.org/r/1614599375-8803-6-git-send-email-ruslan.bilovol@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23usb: gadget: f_uac1: validate input parametersRuslan Bilovol1-0/+43
Currently user can configure UAC1 function with parameters that violate UAC1 spec or are not supported by UAC1 gadget implementation. This can lead to incorrect behavior if such gadget is connected to the host - like enumeration failure or other issues depending on host's UAC1 driver implementation, bringing user to a long hours of debugging the issue. Instead of silently accept these parameters, throw an error if they are not valid. Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com> Link: https://lore.kernel.org/r/1614599375-8803-5-git-send-email-ruslan.bilovol@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23usb: gadget: f_uac2: validate input parametersRuslan Bilovol1-2/+37
Currently user can configure UAC2 function with parameters that violate UAC2 spec or are not supported by UAC2 gadget implementation. This can lead to incorrect behavior if such gadget is connected to the host - like enumeration failure or other issues depending on host's UAC2 driver implementation, bringing user to a long hours of debugging the issue. Instead of silently accept these parameters, throw an error if they are not valid. Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com> Link: https://lore.kernel.org/r/1614599375-8803-4-git-send-email-ruslan.bilovol@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23usb: gadget: legacy: fix error return code of multi_bind()Jia-Ju Bai1-1/+3
When usb_otg_descriptor_alloc() returns NULL to usb_desc, no error return code of multi_bind() is assigned. To fix this bug, status is assigned with -ENOMEM in this case. Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Link: https://lore.kernel.org/r/20210307084545.21775-1-baijiaju1990@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23usb: f_uac2: adds support for SS and SSPPawel Laszczak1-67/+161
Patch adds support of SS and SSP speed. Signed-off-by: Pawel Laszczak <pawell@cadence.com> Link: https://lore.kernel.org/r/20210310105216.38202-1-pawell@gli-login.cadence.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23usb: chipidea: tegra: Silence deferred probe errorDmitry Osipenko1-5/+3
Silence deferred probe error caused by the PHY driver which is probed later than the ChipIdea driver. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20210314203927.2572-1-digetx@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23usb: gadget/function/f_fs string table fix for multiple languagesDean Anderson1-1/+2
Fixes bug with the handling of more than one language in the string table in f_fs.c. str_count was not reset for subsequent language codes. str_count-- "rolls under" and processes u32 max strings on the processing of the second language entry. The existing bug can be reproduced by adding a second language table to the structure "strings" in tools/usb/ffs-test.c. Signed-off-by: Dean Anderson <dean@sensoray.com> Link: https://lore.kernel.org/r/20210317224109.21534-1-dean@sensoray.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23usb: dwc3: Add driver for Xilinx platformsManish Narani4-1/+349
Add a new driver for supporting Xilinx platforms. This driver is used for some sequence of operations required for Xilinx USB controllers. This driver is also used to choose between PIPE clock coming from SerDes and the Suspend Clock. Before the controller is out of reset, the clock selection should be changed to PIPE clock in order to make the USB controller work. There is a register added in Xilinx USB controller register space for the same. Signed-off-by: Manish Narani <manish.narani@xilinx.com> Link: https://lore.kernel.org/r/1615963949-75320-3-git-send-email-manish.narani@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23usb: renesas_usbhs: fix error return code of usbhsf_pkt_handler()Jia-Ju Bai1-1/+3
When __usbhsf_pkt_get() returns NULL to pkt, no error return code of usbhsf_pkt_handler() is assigned. To fix this bug, ret is assigned with -EINVAL in this case. Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Link: https://lore.kernel.org/r/20210307090030.22369-1-baijiaju1990@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23drm/sysfs: Convert sysfs sprintf/snprintf family to sysfs_emitTian Tao1-5/+4
Fix the following coccicheck warning: drivers/gpu/drm/drm_sysfs.c:172:8-16: WARNING: use scnprintf or sprintf drivers/gpu/drm/drm_sysfs.c:185:8-16: WARNING: use scnprintf or sprintf drivers/gpu/drm/drm_sysfs.c:159:8-16: WARNING: use scnprintf or sprintf Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1616375978-12151-1-git-send-email-tiantao6@hisilicon.com
2021-03-23usb: dwc3: gadget: Remove invalid low-speed settingThinh Nguyen3-11/+0
None of the DWC_usb3x IPs (and all their versions) supports low-speed setting in device mode. In the early days, our "Early Adopter Edition" DWC_usb3 databook shows that the controller may be configured to operate in low-speed, but it was revised on release. Let's remove this invalid speed setting to avoid any confusion. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/258b1c7fbb966454f4c4c2c1367508998498fc30.1615509438.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23drivers: usb: host: fotg210-hcd.c: Fix alignment of commentShubhankar Kuranagatti1-1/+1
The * has been aligned on each line for block comment. Signed-off-by: Shubhankar Kuranagatti <shubhankarvk@gmail.com> Link: https://lore.kernel.org/r/20210311190901.gaw7m7ndib3uzakm@kewl-virtual-machine Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23drivers: usb: host: fotg210-hcd.c: Fix indentation errorShubhankar Kuranagatti1-5/+5
A space was given after tab key. The extra space has been removed. This is done to maintain uniformity in the code. Signed-off-by: Shubhankar Kuranagatti <shubhankarvk@gmail.com> Link: https://lore.kernel.org/r/20210311190058.yudmivcbok56itay@kewl-virtual-machine Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23USB: core: rename usb_driver_claim_interface() data parameterJohan Hovold1-3/+3
It's been almost twenty years since the interface "private data" pointer was removed in favour of using the driver-data pointer of struct device. Let's rename the driver-data parameter of usb_driver_claim_interface() so that it better reflects how it's used. Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210318155406.22399-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23USB: core: drop outdated interface-binding commentJohan Hovold1-4/+0
It's been almost twenty years since USB drivers returned a data pointer from their probe routines in order to bind to an interface. Time to update the documentation for usb_driver_claim_interface(). Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210318155406.22399-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23usb: sl811-hcd: improve misleading indentationArnd Bergmann1-5/+4
gcc-11 now warns about a confusingly indented code block: drivers/usb/host/sl811-hcd.c: In function ‘sl811h_hub_control’: drivers/usb/host/sl811-hcd.c:1291:9: error: this ‘if’ clause does not guard... [-Werror=misleading-indentation] 1291 | if (*(u16*)(buf+2)) /* only if wPortChange is interesting */ | ^~ drivers/usb/host/sl811-hcd.c:1295:17: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’ 1295 | break; Rewrite this to use a single if() block with the __is_defined() macro. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210322164244.827589-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23USB: ehci: drop workaround for forced irq threadingJohan Hovold1-10/+3
Force-threaded interrupt handlers used to run with interrupts enabled, something which could lead to deadlocks in case a threaded handler shared a lock with code running in hard interrupt context (e.g. timer callbacks) and did not explicitly disable interrupts. Since commit 81e2073c175b ("genirq: Disable interrupts for force threaded handlers") interrupt handlers always run with interrupts disabled on non-RT so that drivers no longer need to do handle forced threading ("threadirqs"). Drop the now obsolete workaround added by commit a1227f3c1030 ("usb: ehci: fix deadlock when threadirqs option is used"). Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210322111249.32141-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23usb: host: ehci-tegra: Select USB_GADGET Kconfig optionDmitry Osipenko1-0/+1
Select USB_GADGET Kconfig option in order to fix build failure which happens because ChipIdea driver has a build dependency on both USB_GADGET and USB_EHCI_HCD, while USB_EHCI_TEGRA force-selects the ChipIdea driver without taking into account the tristate USB_GADGET dependency. It's not possible to do anything about the cyclic dependency of the Kconfig options, but USB_EHCI_TEGRA is now a deprecated option that isn't used by defconfigs and USB_GADGET is wanted on Tegra by default, hence it's okay to have a bit clunky workaround for it. Fixes: c3590c7656fb ("usb: host: ehci-tegra: Remove the driver") Reported-by: kernel test robot <lkp@intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20210320151915.7566-2-digetx@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23usb: host: ehci-platform: add spurious_oc DT supportÁlvaro Fernández Rojas1-0/+3
Over-current reporting isn't supported on some platforms such as bcm63xx. These devices will incorrectly report over-current if this flag isn't properly activated. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Link: https://lore.kernel.org/r/20210223174455.1378-4-noltari@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23usb: ehci: add spurious flag to disable overcurrent checkingFlorian Fainelli4-3/+6
This patch adds an ignore_oc flag which can be set by EHCI controller not supporting or wanting to disable overcurrent checking. The EHCI platform data in include/linux/usb/ehci_pdriver.h is also augmented to take advantage of this new flag. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Link: https://lore.kernel.org/r/20210223174455.1378-2-noltari@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23staging: rtl8723bs: Trivial typo fixBhaskar Chowdhury1-1/+1
s/netowrk/network/ ..and an extra space has removed from the sentence. Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Link: https://lore.kernel.org/r/20210323092300.1740913-1-unixbhaskar@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23PCI: j721e: Add support to provide refclk to PCIe connectorKishon Vijay Abraham I1-1/+21
Add support to provide refclk to PCIe connector. Link: https://lore.kernel.org/r/20210308063550.6227-5-kishon@ti.com Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2021-03-23PCI: mobiveil: Improve PCIE_LAYERSCAPE_GEN4 dependenciesGeert Uytterhoeven1-2/+1
- Drop the dependency on PCI, as this is implied by the dependency on PCI_MSI_IRQ_DOMAIN, - Drop the dependencies on OF and ARM64, as the driver compiles fine without OF and/or on other architectures, - The Freescale Layerscape PCIe Gen4 controller is present only on Freescale Layerscape SoCs. Hence depend on ARCH_LAYERSCAPE, to prevent asking the user about this driver when configuring a kernel without Freescale Layerscape support, unless compile-testing. Link: https://lore.kernel.org/r/20210208142301.413582-1-geert+renesas@glider.be Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2021-03-23drm/i915/dsc: fix DSS CTL register usage for ICL DSI transcodersJani Nikula1-8/+2
Use the correct DSS CTL registers for ICL DSI transcoders. As a side effect, this also brings back the sanity check for trying to use pipe DSC registers on pipe A on ICL. Fixes: 8a029c113b17 ("drm/i915/dp: Modify VDSC helpers to configure DSC for Bigjoiner slave") References: http://lore.kernel.org/r/87eegxq2lq.fsf@intel.com Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Animesh Manna <animesh.manna@intel.com> Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Cc: <stable@vger.kernel.org> # v5.11+ Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210319115333.8330-1-jani.nikula@intel.com
2021-03-23driver core: dd: remove deferred_devices variableGreg Kroah-Hartman1-4/+3
No need to save the debugfs dentry for the "devices_deferred" debugfs file (gotta love the juxtaposition), if we need to remove it we can look it up from debugfs itself. Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: linux-kernel@vger.kernel.org Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/20210216142400.3759099-2-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23driver core: component: remove dentry pointer in "struct master"Greg Kroah-Hartman1-6/+3
There is no need to keep around a pointer to a dentry when all it is used for is to remove the debugfs file when tearing things down. As the name is simple, have debugfs look up the dentry when removing things, keeping the logic much simpler. Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: linux-kernel@vger.kernel.org Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/20210216142400.3759099-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23driver core: auxiliary bus: Remove unneeded module bitsDave Jiang1-5/+0
Remove module bits in the auxiliary bus code since the auxiliary bus cannot be built as a module and the relevant code is not needed. Cc: Dave Ertman <david.m.ertman@intel.com> Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/161307488980.1896017.15627190714413338196.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23backlight: journada720: Fix Wmisleading-indentation warningArnd Bergmann1-22/+22
With gcc-11, we get a warning about code that looks correct but badly indented: drivers/video/backlight/jornada720_bl.c: In function ‘jornada_bl_update_status’: drivers/video/backlight/jornada720_bl.c:66:11: error: this ‘else’ clause does not guard... [-Werror=misleading-indentation] 66 | } else /* turn on backlight */ | ^~~~ Change the formatting according to our normal conventions. Fixes: 13a7b5dc0d17 ("backlight: Adds HP Jornada 700 series backlight driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.