aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2021-03-22drm/amdgpu: clean up non-DC suspend/resume handlingAlex Deucher8-89/+139
Move the non-DC specific code into the DCE IP blocks similar to how we handle DC. This cleans up the common suspend and resume pathes. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-22drm/amdgpu: don't evict vram on APUs for suspend to ram (v4)Alex Deucher1-5/+2
Vram is system memory, so no need to evict. v2: use PM_EVENT messages v3: use correct dev v4: use driver flags Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-22drm/amdgpu: rework S3/S4/S0ix state handlingAlex Deucher4-29/+25
Set flags at the top level pmops callbacks to track state. This cleans up the current set of flags and properly handles S4 on S0ix capable systems. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-22lsm: separate security_task_getsecid() into subjective and objective variantsPaul Moore1-1/+10
Of the three LSMs that implement the security_task_getsecid() LSM hook, all three LSMs provide the task's objective security credentials. This turns out to be unfortunate as most of the hook's callers seem to expect the task's subjective credentials, although a small handful of callers do correctly expect the objective credentials. This patch is the first step towards fixing the problem: it splits the existing security_task_getsecid() hook into two variants, one for the subjective creds, one for the objective creds. void security_task_getsecid_subj(struct task_struct *p, u32 *secid); void security_task_getsecid_obj(struct task_struct *p, u32 *secid); While this patch does fix all of the callers to use the correct variant, in order to keep this patch focused on the callers and to ease review, the LSMs continue to use the same implementation for both hooks. The net effect is that this patch should not change the behavior of the kernel in any way, it will be up to the latter LSM specific patches in this series to change the hook implementations and return the correct credentials. Acked-by: Mimi Zohar <zohar@linux.ibm.com> (IMA) Acked-by: Casey Schaufler <casey@schaufler-ca.com> Reviewed-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-03-22drm/amdgpu: fix the hibernation suspend with s0ixPrike Liang1-2/+6
During system hibernation suspend still need un-gate gfx CG/PG firstly to handle HW status check before HW resource destory. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-03-22dsa: simplify Kconfig symbols and dependenciesAlexander Lobakin2-14/+5
1. Remove CONFIG_HAVE_NET_DSA. CONFIG_HAVE_NET_DSA is a legacy leftover from the times when drivers should have selected CONFIG_NET_DSA manually. Currently, all drivers has explicit 'depends on NET_DSA', so this is no more needed. 2. CONFIG_HAVE_NET_DSA dependencies became CONFIG_NET_DSA's ones. - dropped !S390 dependency which was introduced to be sure NET_DSA can select CONFIG_PHYLIB. DSA migrated to Phylink almost 3 years ago and the PHY library itself doesn't depend on !S390 since commit 870a2b5e4fcd ("phylib: remove !S390 dependeny from Kconfig"); - INET dependency is kept to be sure we can select NET_SWITCHDEV; - NETDEVICES dependency is kept to be sure we can select PHYLINK. 3. DSA drivers menu now depends on NET_DSA. Instead on 'depends on NET_DSA' on every single driver, the entire menu now depends on it. This eliminates a lot of duplicated lines from Kconfig with no loss (when CONFIG_NET_DSA=m, drivers also can be only m or n). This also has a nice side effect that there's no more empty menu on configurations without DSA. 4. Kbuild will now descend into 'drivers/net/dsa' only when CONFIG_NET_DSA is y or m. This is safe since no objects inside this folder can be built without DSA core, as well as when CONFIG_NET_DSA=m, no objects can be built-in. Signed-off-by: Alexander Lobakin <alobakin@pm.me> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-22iavf: Enable flex-bytes supportHaiyue Wang3-2/+327
Flex-bytes allows for packet matching based on an offset and value. This is supported via the ethtool user-def option. The user-def 0xAAAABBBBCCCCDDDD: BBBB is the 2 byte pattern while AAAA corresponds to its offset in the packet. Similarly DDDD is the 2 byte pattern with CCCC being the corresponding offset. The offset ranges from 0x0 to 0x1F7 (up to 504 bytes into the packet). The offset starts from the beginning of the packet. This feature can be used to allow customers to set flow director rules for protocols headers that are beyond standard ones supported by ethtool (e.g. PFCP or GTP-U). Like for matching GTP-U's TEID value 0x10203040: ethtool -N ens787f0v0 flow-type udp4 dst-port 2152 \ user-def 0x002e102000303040 action 13 Signed-off-by: Haiyue Wang <haiyue.wang@intel.com> Tested-by: Chen Bo <BoX.C.Chen@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-22iavf: Support Ethernet Type Flow Director filtersHaiyue Wang3-1/+42
Support the addition and deletion of Ethernet filters. Supported fields are: proto Supported flow-types are: ether Example usage: ethtool -N ens787f0v0 flow-type ether proto 0x8863 action 6 ethtool -N ens787f0v0 flow-type ether proto 0x8864 action 7 Signed-off-by: Haiyue Wang <haiyue.wang@intel.com> Tested-by: Chen Bo <BoX.C.Chen@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-22iavf: Support IPv6 Flow Director filtersHaiyue Wang3-0/+246
Support the addition and deletion of IPv6 filters. Supported fields are: src-ip, dst-ip, src-port, dst-port and l4proto Supported flow-types are: tcp6, udp6, sctp6, ip6, ah6, esp6 Example usage: ethtool -N ens787f0v0 flow-type tcp6 src-ip 2001::2 \ dst-ip CDCD:910A:2222:5498:8475:1111:3900:2020 \ tclass 1 src-port 22 dst-port 23 action 7 L2TPv3 over IP with 'Session ID' 17: ethtool -N ens787f0v0 flow-type ip6 l4proto 115 l4data 17 action 7 Signed-off-by: Haiyue Wang <haiyue.wang@intel.com> Tested-by: Chen Bo <BoX.C.Chen@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-22iavf: Support IPv4 Flow Director filtersHaiyue Wang5-1/+881
Support the addition and deletion of IPv4 filters. Supported fields are: src-ip, dst-ip, src-port, dst-port and l4proto Supported flow-types are: tcp4, udp4, sctp4, ip4, ah4, esp4 Example usage: ethtool -N ens787f0v0 flow-type tcp4 src-ip 192.168.0.20 \ dst-ip 192.168.0.21 tos 4 src-port 22 dst-port 23 action 8 L2TPv3 over IP with 'Session ID' 17: ethtool -N ens787f0v0 flow-type ip4 l4proto 115 l4data 17 action 3 Signed-off-by: Haiyue Wang <haiyue.wang@intel.com> Tested-by: Chen Bo <BoX.C.Chen@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-22iavf: Add framework to enable ethtool ntuple filtersHaiyue Wang4-1/+257
Enable ethtool ntuple filter support on the VF driver using the virtchnl interface to the PF driver and the Flow director functionality in the hardware. Signed-off-by: Haiyue Wang <haiyue.wang@intel.com> Tested-by: Chen Bo <BoX.C.Chen@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-22ice: Check FDIR program status for AVFQi Zhang7-16/+541
Enable returning FDIR completion status by checking the ctrl_vsi Rx queue descriptor value. To enable returning FDIR completion status from ctrl_vsi Rx queue, COMP_Queue and COMP_Report of FDIR filter programming descriptor needs to be properly configured. After program request sent to ctrl_vsi Tx queue, ctrl_vsi Rx queue interrupt will be triggered and completion status will be returned. Driver will first issue request in ice_vc_fdir_add_fltr(), then pass FDIR context to the background task in interrupt service routine ice_vc_fdir_irq_handler() and finally deal with them in ice_flush_fdir_ctx(). ice_flush_fdir_ctx() will check the descriptor's value, fdir context, and then send back virtual channel message to VF by calling ice_vc_add_fdir_fltr_post(). An additional timer will be setup in case of hardware interrupt timeout. Signed-off-by: Yahui Cao <yahui.cao@intel.com> Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Tested-by: Chen Bo <BoX.C.Chen@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-22ice: Add more FDIR filter type for AVFQi Zhang4-18/+545
FDIR for AVF can forward - L2TPV3 packets by matching session id. - IPSEC ESP packets by matching security parameter index. - IPSEC AH packets by matching security parameter index. - NAT_T ESP packets by matching security parameter index. - Any PFCP session packets(s field is 1). Signed-off-by: Yahui Cao <yahui.cao@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Tested-by: Chen Bo <BoX.C.Chen@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-22ice: Add GTPU FDIR filter for AVFQi Zhang4-0/+218
Add new FDIR filter type to forward GTPU packets by matching TEID or QFI. The filter is only enabled when COMMS DDP package is downloaded. Signed-off-by: Yahui Cao <yahui.cao@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Tested-by: Chen Bo <BoX.C.Chen@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-22ice: Add non-IP Layer2 protocol FDIR filter for AVFQi Zhang6-4/+73
Add new filter type that allow forward non-IP Ethernet packets base on its ethertype. The filter is only enabled when COMMS DDP package is loaded. Signed-off-by: Yahui Cao <yahui.cao@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Tested-by: Chen Bo <BoX.C.Chen@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-22ice: Add new actions support for VF FDIRQi Zhang3-1/+25
Add two new actions support for VF FDIR: A passthrough action does not specify the destination queue, but just allow the packet go to next pipeline stage, a typical use cases is combined with a software mark (FDID) action. Allow specify a 2^n continuous queues as the destination of a FDIR rule. Packet distribution is based on current RSS configure. Signed-off-by: Yahui Cao <yahui.cao@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Tested-by: Chen Bo <BoX.C.Chen@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-22ice: Add FDIR pattern action parser for VFQi Zhang1-2/+345
Add basic FDIR flow list and pattern / action parse functions for VF. Signed-off-by: Yahui Cao <yahui.cao@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Tested-by: Chen Bo <BoX.C.Chen@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-22ice: Enable FDIR Configure for AVFQi Zhang9-6/+1094
The virtual channel is going to be extended to support FDIR and RSS configure from AVF. New data structures and OP codes will be added, the patch enable the FDIR part. To support above advanced AVF feature, we need to figure out what kind of data structure should be passed from VF to PF to describe an FDIR rule or RSS config rule. The common part of the requirement is we need a data structure to represent the input set selection of a rule's hash key. An input set selection is a group of fields be selected from one or more network protocol layers that could be identified as a specific flow. For example, select dst IP address from an IPv4 header combined with dst port from the TCP header as the input set for an IPv4/TCP flow. The patch adds a new data structure virtchnl_proto_hdrs to abstract a network protocol headers group which is composed of layers of network protocol header(virtchnl_proto_hdr). A protocol header contains a 32 bits mask (field_selector) to describe which fields are selected as input sets, as well as a header type (enum virtchnl_proto_hdr_type). Each bit is mapped to a field in enum virtchnl_proto_hdr_field guided by its header type. +------------+-----------+------------------------------+ | | Proto Hdr | Header Type A | | | +------------------------------+ | | | BIT 31 | ... | BIT 1 | BIT 0 | | |-----------+------------------------------+ |Proto Hdrs | Proto Hdr | Header Type B | | | +------------------------------+ | | | BIT 31 | ... | BIT 1 | BIT 0 | | |-----------+------------------------------+ | | Proto Hdr | Header Type C | | | +------------------------------+ | | | BIT 31 | ... | BIT 1 | BIT 0 | | |-----------+------------------------------+ | | .... | +-------------------------------------------------------+ All fields in enum virtchnl_proto_hdr_fields are grouped with header type and the value of the first field of a header type is always 32 aligned. enum proto_hdr_type { header_type_A = 0; header_type_B = 1; .... } enum proto_hdr_field { /* header type A */ header_A_field_0 = 0, header_A_field_1 = 1, header_A_field_2 = 2, header_A_field_3 = 3, /* header type B */ header_B_field_0 = 32, // = header_type_B << 5 header_B_field_0 = 33, header_B_field_0 = 34 header_B_field_0 = 35, .... }; So we have: proto_hdr_type = proto_hdr_field / 32 bit offset = proto_hdr_field % 32 To simply the protocol header's operations, couple help macros are added. For example, to select src IP and dst port as input set for an IPv4/UDP flow. we have: struct virtchnl_proto_hdr hdr[2]; VIRTCHNL_SET_PROTO_HDR_TYPE(&hdr[0], IPV4) VIRTCHNL_ADD_PROTO_HDR_FIELD(&hdr[0], IPV4, SRC) VIRTCHNL_SET_PROTO_HDR_TYPE(&hdr[1], UDP) VIRTCHNL_ADD_PROTO_HDR_FIELD(&hdr[1], UDP, DST) The byte array is used to store the protocol header of a training package. The byte array must be network order. The patch added virtual channel support for iAVF FDIR add/validate/delete filter. iAVF FDIR is Flow Director for Intel Adaptive Virtual Function which can direct Ethernet packets to the queues of the Network Interface Card. Add/delete command is adding or deleting one rule for each virtual channel message, while validate command is just verifying if this rule is valid without any other operations. To add or delete one rule, driver needs to config TCAM and Profile, build training packets which contains the input set value, and send the training packets through FDIR Tx queue. In addition, driver needs to manage the software context to avoid adding duplicated rules, deleting non-existent rule, input set conflicts and other invalid cases. NOTE: Supported pattern/actions and their parse functions are not be included in this patch, they will be added in a separate one. Signed-off-by: Jeff Guo <jia.guo@intel.com> Signed-off-by: Yahui Cao <yahui.cao@intel.com> Signed-off-by: Simei Su <simei.su@intel.com> Signed-off-by: Beilei Xing <beilei.xing@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Tested-by: Chen Bo <BoX.C.Chen@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-22ice: Add support for per VF ctrl VSI enablingQi Zhang5-11/+129
We are going to enable FDIR configure for AVF through virtual channel. The first step is to add helper functions to support control VSI setup. A control VSI will be allocated for a VF when AVF creates its first FDIR rule through ice_vf_ctrl_vsi_setup(). The patch will also allocate FDIR rule space for VF's control VSI. If a VF asks for flow director rules, then those should come entirely from the best effort pool and not from the guaranteed pool. The patch allow a VF VSI to have only space in the best effort rules. Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com> Signed-off-by: Yahui Cao <yahui.cao@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Tested-by: Chen Bo <BoX.C.Chen@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-22ice: Enhanced IPv4 and IPv6 flow filterQi Zhang2-5/+53
Separate IPv4 and IPv6 ptype bit mask table into 2 tables: with or without L4 protocols. When a flow filter without any l4 type is specified, the ICE_FLOW_SEG_HDR_IPV_OTHER flag can be used to describe if user want to create a IP rule target for all IP packet or just IP packet without l4 header. Signed-off-by: Dan Nowlin <dan.nowlin@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Tested-by: Chen Bo <BoX.C.Chen@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-22ice: Support to separate GTP-U uplink and downlinkQi Zhang4-15/+241
To apply different input set for GTP-U packet with or without extend header as well as GTP-U uplink and downlink, we need to add TCAM mask matching capability. This allows comprehending different PTYPE attributes by examining flags from the parser. Using this method, different profiles can be used by examining flag values from the parser. Signed-off-by: Dan Nowlin <dan.nowlin@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Tested-by: Chen Bo <BoX.C.Chen@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-22ice: Add more advanced protocol support in flow filterQi Zhang3-6/+397
Add more protocol support in flow filter, these include PPPoE, L2TPv3, GTP, PFCP, ESP and AH. Signed-off-by: Ting Xu <ting.xu@intel.com> Signed-off-by: Yahui Cao <yahui.cao@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Tested-by: Chen Bo <BoX.C.Chen@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-22ice: Support non word aligned input set fieldQi Zhang8-36/+623
To support FDIR input set with protocol field like DSCP, TTL, PROT, etc. which is not word aligned, we need to enable field vector masking. Signed-off-by: Dan Nowlin <dan.nowlin@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Tested-by: Chen Bo <BoX.C.Chen@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-22ice: Add more basic protocol support for flow filterQi Zhang5-6/+220
Add more protocol and field support for flow filter include: ETH, VLAN, ICMP, ARP and TCP flag. Signed-off-by: Kevin Scott <kevin.c.scott@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Tested-by: Chen Bo <BoX.C.Chen@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-22PCI: tegra: Fix typo for PCIe endpoint mode in Tegra194Wesley Sheng1-1/+1
In config PCIE_TEGRA194_EP the mode incorrectly is referred to as host mode. Fix it. Link: https://lore.kernel.org/r/20201231032539.22322-1-wesley.sheng@amd.com Signed-off-by: Wesley Sheng <wesley.sheng@amd.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com> Acked-by: Vidya Sagar <vidyas@nvidia.com>
2021-03-22PCI: brcmstb: Fix error return code in brcm_pcie_probe()Wei Yongjun1-0/+1
Fix to return negative error code -ENODEV from the unsupported revision error handling case instead of 0, as done elsewhere in this function. Link: https://lore.kernel.org/r/20210308135619.19133-1-weiyongjun1@huawei.com Fixes: 0cdfaceb9889 ("PCI: brcmstb: support BCM4908 with external PERST# signal controller") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com>
2021-03-22backlight: qcom-wled: Fix FSC update issue for WLED5Kiran Gunda1-6/+19
Currently, for WLED5, the FSC (Full scale current) setting is not updated properly due to driver toggling the wrong register after an FSC update. On WLED5 we should only toggle the MOD_SYNC bit after a brightness update. For an FSC update we need to toggle the SYNC bits instead. Fix it by adopting the common wled3_sync_toggle() for WLED5 and introducing new code to the brightness update path to compensate. Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-03-22PCI: layerscape: Correct syntax by changing comma to semicolonKrzysztof Wilczyński1-1/+1
Replace command with a semicolon to correct syntax and to prevent potential unspecified behaviour and/or unintended side effects. Related: https://lore.kernel.org/linux-pci/20201216131944.14990-1-zhengyongjun3@huawei.com/ Co-authored-by: Zheng Yongjun <zhengyongjun3@huawei.com> Link: https://lore.kernel.org/r/20210311033745.1547044-1-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Roy Zang <roy.zang@nxp.com>
2021-03-22media: atomisp: Write function decleration in one linePhilipp Gerlesberger1-33/+11
CHECK:OPEN_ENDED_LINE: Lines should not end with a '(' WARNING:LEADING_SPACE: please, no spaces at the start of a line Avoid these errors by writing the function decleration in one line. Link: https://lore.kernel.org/linux-media/20201214110358.7102-12-Philipp.Gerlesberger@fau.de Co-developed-by: Andrey Khlopkov <ij72uhux@stud.informatik.uni-erlangen.de> Signed-off-by: Andrey Khlopkov <ij72uhux@stud.informatik.uni-erlangen.de> Signed-off-by: Philipp Gerlesberger <Philipp.Gerlesberger@fau.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-22media: atomisp: Fix BLOCK_COMMENT_STYLEPhilipp Gerlesberger1-2/+2
Block comments should align the * on each line Link: https://lore.kernel.org/linux-media/20201214110156.6152-11-Philipp.Gerlesberger@fau.de Co-developed-by: Andrey Khlopkov <ij72uhux@stud.informatik.uni-erlangen.de> Signed-off-by: Andrey Khlopkov <ij72uhux@stud.informatik.uni-erlangen.de> Signed-off-by: Philipp Gerlesberger <Philipp.Gerlesberger@fau.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-22media: atomisp: Fix PARENTHESIS_ALIGNMENTPhilipp Gerlesberger1-2/+1
You can sum up the two lines, because the maximum line length of 100 columns is not exceeded. Link: https://lore.kernel.org/linux-media/20201214110156.6152-10-Philipp.Gerlesberger@fau.de Co-developed-by: Andrey Khlopkov <ij72uhux@stud.informatik.uni-erlangen.de> Signed-off-by: Andrey Khlopkov <ij72uhux@stud.informatik.uni-erlangen.de> Signed-off-by: Philipp Gerlesberger <Philipp.Gerlesberger@fau.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-22media: atomisp: Delete bracesPhilipp Gerlesberger1-2/+0
WARNING:BRACES: braces {} are not necessary for single statement blocks Link: https://lore.kernel.org/linux-media/20201214110156.6152-9-Philipp.Gerlesberger@fau.de Co-developed-by: Andrey Khlopkov <ij72uhux@stud.informatik.uni-erlangen.de> Signed-off-by: Andrey Khlopkov <ij72uhux@stud.informatik.uni-erlangen.de> Signed-off-by: Philipp Gerlesberger <Philipp.Gerlesberger@fau.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-22media: atomisp: Fix funciton declerationPhilipp Gerlesberger1-3/+2
Write return_type, function_name and parameters in one line because lines should not end with a '(' [OPEN_ENDED_LINE] Write open brace ’{’ on the next line to fix OPEN_BRACE Error Link: https://lore.kernel.org/linux-media/20201214110156.6152-8-Philipp.Gerlesberger@fau.de Co-developed-by: Andrey Khlopkov <ij72uhux@stud.informatik.uni-erlangen.de> Signed-off-by: Andrey Khlopkov <ij72uhux@stud.informatik.uni-erlangen.de> Signed-off-by: Philipp Gerlesberger <Philipp.Gerlesberger@fau.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-22media: atomisp: Fix overlong linePhilipp Gerlesberger1-1/+2
Line length of 105 exceeds 100 columns. Link: https://lore.kernel.org/linux-media/20201214110156.6152-6-Philipp.Gerlesberger@fau.de Co-developed-by: Andrey Khlopkov <ij72uhux@stud.informatik.uni-erlangen.de> Signed-off-by: Andrey Khlopkov <ij72uhux@stud.informatik.uni-erlangen.de> Signed-off-by: Philipp Gerlesberger <Philipp.Gerlesberger@fau.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-22media: atomisp: Fix OPEN_ENDED_LINEPhilipp Gerlesberger1-2/+1
Lines should not end with a '(' Link: https://lore.kernel.org/linux-media/20201214110156.6152-5-Philipp.Gerlesberger@fau.de Co-developed-by: Andrey Khlopkov <ij72uhux@stud.informatik.uni-erlangen.de> Signed-off-by: Andrey Khlopkov <ij72uhux@stud.informatik.uni-erlangen.de> Signed-off-by: Philipp Gerlesberger <Philipp.Gerlesberger@fau.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-22media: atomisp: Fix EMBEDDED_FUNCTION_NAME warningPhilipp Gerlesberger1-5/+3
Use the automatically defined __func__ macro instead of the function name, so it stays correct when the function is renamed. Link: https://lore.kernel.org/linux-media/20201214110156.6152-4-Philipp.Gerlesberger@fau.de Co-developed-by: Andrey Khlopkov <ij72uhux@stud.informatik.uni-erlangen.de> Signed-off-by: Andrey Khlopkov <ij72uhux@stud.informatik.uni-erlangen.de> Signed-off-by: Philipp Gerlesberger <Philipp.Gerlesberger@fau.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-22media: atomisp: Fix Block CommentsPhilipp Gerlesberger1-2/+3
Block comments should use * on subsequent lines and should use a trailing */ on a separate line. Link: https://lore.kernel.org/linux-media/20201214110156.6152-3-Philipp.Gerlesberger@fau.de Co-developed-by: Andrey Khlopkov <ij72uhux@stud.informatik.uni-erlangen.de> Signed-off-by: Andrey Khlopkov <ij72uhux@stud.informatik.uni-erlangen.de> Signed-off-by: Philipp Gerlesberger <Philipp.Gerlesberger@fau.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-22media: atomisp: Convert comments to C99 initializersPhilipp Gerlesberger1-17/+5
The struct initalizers have been changed as recommended on https://kernelnewbies.org/KernelJanitors/Todo Also remove all the false, 0, and NULL members. Link: https://lore.kernel.org/linux-media/20201214110156.6152-2-Philipp.Gerlesberger@fau.de Co-developed-by: Andrey Khlopkov <ij72uhux@stud.informatik.uni-erlangen.de> Signed-off-by: Andrey Khlopkov <ij72uhux@stud.informatik.uni-erlangen.de> Signed-off-by: Philipp Gerlesberger <Philipp.Gerlesberger@fau.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-22pwm: Add Raspberry Pi Firmware based PWM busNicolas Saenz Julienne3-0/+216
Adds support to control the PWM bus available in official Raspberry Pi PoE HAT. Only RPi's co-processor has access to it, so commands have to be sent through RPi's firmware mailbox interface. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Thierry Reding <thierry.reding@gmail.com>
2021-03-22input: raspberrypi-ts: Release firmware handle when not neededNicolas Saenz Julienne1-1/+1
There is no use for the firmware interface after getting the touch buffer address, so release it. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
2021-03-22staging: vchiq: Release firmware handle on unbindNicolas Saenz Julienne1-1/+1
Use devm_rpi_firmware_get() so as to make sure we release RPi's firmware interface when unbinding the device. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-22soc: bcm: raspberrypi-power: Release firmware handle on unbindNicolas Saenz Julienne1-1/+1
Use devm_rpi_firmware_get() so as to make sure we release RPi's firmware interface when unbinding the device. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
2021-03-22reset: raspberrypi: Release firmware handle on unbindNicolas Saenz Julienne1-1/+1
Use devm_rpi_firmware_get() so as to make sure we release RPi's firmware interface when unbinding the device. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
2021-03-22gpio: raspberrypi-exp: Release firmware handle on unbindNicolas Saenz Julienne1-1/+1
Use devm_rpi_firmware_get() so as to make sure we release RPi's firmware interface when unbinding the device. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-03-22clk: bcm: rpi: Release firmware handle on unbindNicolas Saenz Julienne1-1/+1
Use devm_rpi_firmware_get() so as to make sure we release RPi's firmware interface when unbinding the device. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Stephen Boyd <sboyd@kernel.org> drivers/clk/bcm/clk-raspberrypi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
2021-03-22firmware: raspberrypi: Introduce devm_rpi_firmware_get()Nicolas Saenz Julienne1-0/+29
It'll simplify the firmware handling for most consumers. Suggested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-03-22firmware: raspberrypi: Keep count of all consumersNicolas Saenz Julienne1-3/+37
When unbinding the firmware device we need to make sure it has no consumers left. Otherwise we'd leave them with a firmware handle pointing at freed memory. Keep a reference count of all consumers and introduce rpi_firmware_put() which will permit automatically decrease the reference count upon unbinding consumer drivers. Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-03-22media: atomisp: remove redundant NULL check of "params"Ding Xiang1-3/+1
The check result of (!A || (A && B)) is equivalent to (!A || B), so remove redundant NULL check of "params" Link: https://lore.kernel.org/linux-media/20201117081058.673291-1-dingxiang@cmss.chinamobile.com Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-22media: atomisp: do not select COMMON_CLK to fix buildsKrzysztof Kozlowski1-1/+1
COMMON_CLK is a user-selectable option with its own dependencies. The most important dependency is !HAVE_LEGACY_CLK. User-selectable drivers should not select COMMON_CLK because they will create a dependency cycle and build failures. Link: https://lore.kernel.org/linux-media/20210316075625.10382-1-krzysztof.kozlowski@canonical.com Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-22media: atomisp: make atomisp_css_continuous_set_num_raw_frames() voidKaixu Xia3-12/+8
The return value of atomisp_css_continuous_set_num_raw_frames() function is always 0, so there's no reason for a return value. In addition, the __enable_continuous_mode() checked the return value for possible error which is unnecessary. Convert atomisp_css_continuous_set_num_raw_frames() to a void function. Link: https://lore.kernel.org/linux-media/1605362150-11401-1-git-send-email-kaixuxia@tencent.com Reported-by: Tosk Robot <tencent_os_robot@tencent.com> Signed-off-by: Kaixu Xia <kaixuxia@tencent.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.