aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2022-07-19gpio: twl4030: Drop platform teardown callbackUwe Kleine-König1-11/+0
There is no machine providing a teardown callback, so drop the unused code. This is a preparation for making platform remove callbacks return void. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19gpio: davinci: Add support for system suspend/resume PMDevarsh Thakkar1-0/+83
Add support for system suspend/resume PM hooks, save the register context of all the required gpio registers on suspend and restore context on the resume. Signed-off-by: Devarsh Thakkar <devarsht@ti.com> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19gpiolib: devres: Get rid of unused devm_gpio_free()Andy Shevchenko1-32/+0
The last user, which in fact was a dead code, has gone a year ago, previous one 3 years ago. On top of that we want to drop away the legacy GPIO APIs in the kernel, so take a chance to get rid of unused devm_gpio_free() and accompanying stuff. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19net: prestera: acl: add support for 'police' action on egressMaksym Glubokiy1-1/+1
Propagate ingress/egress direction for 'police' action down to hardware. Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Maksym Glubokiy <maksym.glubokiy@plvision.eu> Link: https://lore.kernel.org/r/20220714083541.1973919-1-maksym.glubokiy@plvision.eu Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-19drm/i915/display: Add debug print for scaler filterSwati Sharma2-6/+8
Add debug print statement to print scaler filter property value. Since property can be set as either default or integer scaler; its good if we can get debug print for the same in dmesg log. Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Signed-off-by: Swati Sharma <swati2.sharma@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220706102240.21414-1-swati2.sharma@intel.com
2022-07-19clk: lan966x: Fix the lan966x clock gate register addressHerve Codina1-1/+1
The register address used for the clock gate register is the base register address coming from first reg map (ie. the generic clock registers) instead of the second reg map defining the clock gate register. Use the correct clock gate register address. Fixes: 5ad5915dea00 ("clk: lan966x: Extend lan966x clock driver for clock gating support") Signed-off-by: Herve Codina <herve.codina@bootlin.com> Link: https://lore.kernel.org/r/20220704102845.168438-2-herve.codina@bootlin.com Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Tested-by: Michael Walle <michael@walle.cc> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-07-19drm:remove rebundant word "in" in commentsshaomin Deng1-1/+1
there is a repeated word "in", so remove it. Signed-off-by: shaomin Deng <dengshaomin@cdjrlc.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220718150418.7321-1-dengshaomin@cdjrlc.com
2022-07-19drm:delete the repeated word "the" in commentsshaomin Deng1-1/+1
remove the rebundant word "the" from comments. Signed-off-by: shaomin Deng <dengshaomin@cdjrlc.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220718151154.9628-1-dengshaomin@cdjrlc.com
2022-07-19OPP: Don't drop opp->np reference while it is still in useLiang He3-8/+12
The struct dev_pm_opp contains a reference of the DT node, opp->np, throughout its lifetime. We should increase the refcount for the same from _opp_add_static_v2(), and drop it while removing the OPP finally. Signed-off-by: Liang He <windhl@126.com> [ Viresh: Updated subject / commit log, create _of_clear_opp() and drop reference from it] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-19RDMA/hfi1: fix potential memory leak in setup_base_ctxt()Jianglei Nie1-1/+3
setup_base_ctxt() allocates a memory chunk for uctxt->groups with hfi1_alloc_ctxt_rcv_groups(). When init_user_ctxt() fails, uctxt->groups is not released, which will lead to a memory leak. We should release the uctxt->groups with hfi1_free_ctxt_rcv_groups() when init_user_ctxt() fails. Fixes: e87473bc1b6c ("IB/hfi1: Only set fd pointer when base context is completely initialized") Link: https://lore.kernel.org/r/20220711070718.2318320-1-niejianglei2021@163.com Signed-off-by: Jianglei Nie <niejianglei2021@163.com> Acked-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-07-19OPP: Don't drop opp_table->np reference while it is still in useLiang He1-1/+1
The OPP table contains a reference of the DT node, opp_table->np, throughout its lifetime. We shouldn't drop the refcount for the same from _of_init_opp_table(), but do that while removing the OPP table finally. Signed-off-by: Liang He <windhl@126.com> [ Viresh: Updated subject / commit log and drop reference from _of_clear_opp_table() ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-19scsi: core: cap shost max_sectors according to DMA limits only onceJohn Garry2-4/+5
The shost->max_sectors is repeatedly capped according to the host DMA mapping limit for each sdev in __scsi_init_queue(). This is unnecessary, so set only once when adding the host. Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-07-19dma-iommu: add iommu_dma_opt_mapping_size()John Garry2-0/+11
Add the IOMMU callback for DMA mapping API dma_opt_mapping_size(), which allows the drivers to know the optimal mapping limit and thus limit the requested IOVA lengths. This value is based on the IOVA rcache range limit, as IOVAs allocated above this limit must always be newly allocated, which may be quite slow. Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-07-18Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueJakub Kicinski4-11/+15
Tony Nguyen says: ==================== 100GbE Intel Wired LAN Driver Updates 2022-07-15 This series contains updates to ice driver only. Ani updates feature restriction for devices that don't support external time stamping. Zhuo Chen removes unnecessary call to pci_aer_clear_nonfatal_status(). * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: Remove pci_aer_clear_nonfatal_status() call ice: Add EXTTS feature to the feature bitmap ==================== Link: https://lore.kernel.org/r/20220715214642.2968799-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-18net: macb: fixup sparse warnings on __be16 portsBen Dooks1-3/+4
The port fields in the ethool flow structures are defined to be __be16 types, so sparse is showing issues where these are being passed to htons(). Fix these warnings by passing them to be16_to_cpu() instead. These are being used in netdev_dbg() so should only effect anyone doing debug. Fixes the following sparse warnings: drivers/net/ethernet/cadence/macb_main.c:3366:9: warning: cast from restricted __be16 drivers/net/ethernet/cadence/macb_main.c:3366:9: warning: cast from restricted __be16 drivers/net/ethernet/cadence/macb_main.c:3366:9: warning: cast from restricted __be16 drivers/net/ethernet/cadence/macb_main.c:3419:25: warning: cast from restricted __be16 drivers/net/ethernet/cadence/macb_main.c:3419:25: warning: cast from restricted __be16 drivers/net/ethernet/cadence/macb_main.c:3419:25: warning: cast from restricted __be16 drivers/net/ethernet/cadence/macb_main.c:3419:25: warning: cast from restricted __be16 Signed-off-by: Ben Dooks <ben.dooks@sifive.com> Link: https://lore.kernel.org/r/20220715173009.526126-1-ben.dooks@sifive.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-18net: prestera: acl: fix code formattingMaksym Glubokiy1-4/+4
Make the code look better. Signed-off-by: Maksym Glubokiy <maksym.glubokiy@plvision.eu> Link: https://lore.kernel.org/r/20220715103806.7108-1-maksym.glubokiy@plvision.eu Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-18vmxnet3: Record queue number to incoming packetsAndrey Turkin1-0/+1
Make generic XDP processing attribute packets to their actual queues instead of queue #0. This improves AF_XDP performance considerably since softirq threads no longer fight over single AF_XDP socket spinlock. Signed-off-by: Andrey Turkin <andrey.turkin@gmail.com> Link: https://lore.kernel.org/r/20220717022050.822766-2-andrey.turkin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-18net: stmmac: remove redunctant disable xPCS EEE callWong Vee Khee1-8/+0
Disable is done in stmmac_init_eee() on the event of MAC link down. Since setting enable/disable EEE via ethtool will eventually trigger a MAC down, removing this redunctant call in stmmac_ethtool.c to avoid calling xpcs_config_eee() twice. Fixes: d4aeaed80b0e ("net: stmmac: trigger PCS EEE to turn off on link down") Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com> Link: https://lore.kernel.org/r/20220715122402.1017470-1-vee.khee.wong@linux.intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-18ixgbe: Add locking to prevent panic when setting sriov_numvfs to zeroPiotr Skajewski3-0/+10
It is possible to disable VFs while the PF driver is processing requests from the VF driver. This can result in a panic. BUG: unable to handle kernel paging request at 000000000000106c PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 8 PID: 0 Comm: swapper/8 Kdump: loaded Tainted: G I --------- - Hardware name: Dell Inc. PowerEdge R740/06WXJT, BIOS 2.8.2 08/27/2020 RIP: 0010:ixgbe_msg_task+0x4c8/0x1690 [ixgbe] Code: 00 00 48 8d 04 40 48 c1 e0 05 89 7c 24 24 89 fd 48 89 44 24 10 83 ff 01 0f 84 b8 04 00 00 4c 8b 64 24 10 4d 03 a5 48 22 00 00 <41> 80 7c 24 4c 00 0f 84 8a 03 00 00 0f b7 c7 83 f8 08 0f 84 8f 0a RSP: 0018:ffffb337869f8df8 EFLAGS: 00010002 RAX: 0000000000001020 RBX: 0000000000000000 RCX: 000000000000002b RDX: 0000000000000002 RSI: 0000000000000008 RDI: 0000000000000006 RBP: 0000000000000006 R08: 0000000000000002 R09: 0000000000029780 R10: 00006957d8f42832 R11: 0000000000000000 R12: 0000000000001020 R13: ffff8a00e8978ac0 R14: 000000000000002b R15: ffff8a00e8979c80 FS: 0000000000000000(0000) GS:ffff8a07dfd00000(0000) knlGS:00000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000106c CR3: 0000000063e10004 CR4: 00000000007726e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> ? ttwu_do_wakeup+0x19/0x140 ? try_to_wake_up+0x1cd/0x550 ? ixgbevf_update_xcast_mode+0x71/0xc0 [ixgbevf] ixgbe_msix_other+0x17e/0x310 [ixgbe] __handle_irq_event_percpu+0x40/0x180 handle_irq_event_percpu+0x30/0x80 handle_irq_event+0x36/0x53 handle_edge_irq+0x82/0x190 handle_irq+0x1c/0x30 do_IRQ+0x49/0xd0 common_interrupt+0xf/0xf This can be eventually be reproduced with the following script: while : do echo 63 > /sys/class/net/<devname>/device/sriov_numvfs sleep 1 echo 0 > /sys/class/net/<devname>/device/sriov_numvfs sleep 1 done Add lock when disabling SR-IOV to prevent process VF mailbox communication. Fixes: d773d1310625 ("ixgbe: Fix memory leak when SR-IOV VFs are direct assigned") Signed-off-by: Piotr Skajewski <piotrx.skajewski@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220715214456.2968711-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-18i40e: Fix erroneous adapter reinitialization during recovery processDawid Lukwinski1-8/+5
Fix an issue when driver incorrectly detects state of recovery process and erroneously reinitializes interrupts, which results in a kernel error and call trace message. The issue was caused by a combination of two factors: 1. Assuming the EMP reset issued after completing firmware recovery means the whole recovery process is complete. 2. Erroneous reinitialization of interrupt vector after detecting the above mentioned EMP reset. Fixes (1) by changing how recovery state change is detected and (2) by adjusting the conditional expression to ensure using proper interrupt reinitialization method, depending on the situation. Fixes: 4ff0ee1af016 ("i40e: Introduce recovery mode support") Signed-off-by: Dawid Lukwinski <dawid.lukwinski@intel.com> Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220715214542.2968762-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-18net: ethernet: mtk_eth_soc: fix off by one check of ARRAY_SIZETom Rix1-1/+1
In mtk_wed_tx_ring_setup(.., int idx, ..), idx is used as an index here struct mtk_wed_ring *ring = &dev->tx_ring[idx]; The bounds of idx are checked here BUG_ON(idx > ARRAY_SIZE(dev->tx_ring)); If idx is the size of the array, it will pass this check and overflow. So change the check to >= . Fixes: 804775dfc288 ("net: ethernet: mtk_eth_soc: add support for Wireless Ethernet Dispatch (WED)") Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20220716214654.1540240-1-trix@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-18netdevsim: convert driver to use unlocked devlink API during init/finiJiri Pirko4-123/+95
Prepare for devlink reload being called with devlink->lock held and convert the netdevsim driver to use unlocked devlink API during init and fini flows. Take devl_lock() in reload_down() and reload_up() ops in the meantime before reload cmd is converted to take the lock itself. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-18mlxsw: convert driver to use unlocked devlink API during init/finiJiri Pirko10-241/+248
Prepare for devlink reload being called with devlink->lock held and convert the mlxsw driver to use unlocked devlink API during init and fini flows. Take devl_lock() in reload_down() and reload_up() ops in the meantime before reload cmd is converted to take the lock itself. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-18scsi: target: iscsi: Fix clang -Wformat warningsJustin Stitt2-3/+3
When building with Clang we encounter these warnings: | drivers/target/iscsi/iscsi_target_login.c:719:24: error: format | specifies type 'unsigned short' but the argument has type 'int' | [-Werror,-Wformat] " from node: %s\n", atomic_read(&sess->nconn), - | drivers/target/iscsi/iscsi_target_login.c:767:12: error: format | specifies type 'unsigned short' but the argument has type 'int' | [-Werror,-Wformat] " %s\n", atomic_read(&sess->nconn), - | drivers/target/iscsi/iscsi_target.c:4365:12: error: format specifies | type 'unsigned short' but the argument has type 'int' [-Werror,-Wformat] | " %s\n", atomic_read(&sess->nconn) For all warnings, the format specifier is '%hu' which describes an unsigned short. The resulting type of atomic_read is an int. The proposed fix is to listen to Clang and swap the format specifier. Link: https://github.com/ClangBuiltLinux/linux/issues/378 Link: https://lore.kernel.org/r/20220718180421.49697-1-justinstitt@google.com Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Justin Stitt <justinstitt@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-18scsi: ufs: core: Read device property for ref clockDaniil Lunev1-0/+16
UFS storage devices require bRefClkFreq attribute to be set to operate correctly at high speed mode. The necessary value is determined by what the SoC / board supports. The standard doesn't specify a method to query the value, so the information needs to be fed in separately. DT information feeds into setting up the clock framework, so platforms using DT can get the UFS reference clock frequency from the clock framework. A special node "ref_clk" from the clock array for the UFS controller node is used as the source for the information. On the platforms that do not use DT (e.g. Intel), the alternative mechanism to feed the intended reference clock frequency is necessary. Specifying the necessary information in DSD of the UFS controller ACPI node is an alternative mechanism proposed in this patch. Those can be accessed via firmware property facility in the kernel and in many ways simillar to querying properties defined in DT. This patch introduces a small helper function to query a predetermined ACPI supplied property of the UFS controller, and uses it to attempt retrieving reference clock value, unless that was already done by the clock infrastructure. Link: https://lore.kernel.org/r/20220715210230.1.I365d113d275117dee8fd055ce4fc7e6aebd0bce9@changeid Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Daniil Lunev <dlunev@chromium.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-18scsi: libsas: Resume SAS host for phy reset or enable via sysfsXiang Chen1-0/+4
Currently if a phy reset or enable phy is issued via sysfs when controller is suspended, those operations will be ignored as SAS_HA_REGISTERED is cleared. If RPM is enabled then we may aggressively suspend automatically. In this case it may be difficult to enable or reset a phy via sysfs, so resume the host in these scenarios. Link: https://lore.kernel.org/r/1657823002-139010-6-git-send-email-john.garry@huawei.com Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-18scsi: hisi_sas: Modify v3 HW SATA completion error processingXingui Yang1-1/+8
If the I/O completion response frame returned by the target device has been written to the host memory and the err bit in the status field of the received fis is 1, ts->stat should set to SAS_PROTO_RESPONSE, and this will let EH analyze and further determine cause of failure. Link: https://lore.kernel.org/r/1657823002-139010-5-git-send-email-john.garry@huawei.com Signed-off-by: Xingui Yang <yangxingui@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-18scsi: hisi_sas: Relocate DMA unmap of SMP taskXiang Chen4-7/+5
Currently SMP tasks are DMA unmapped only when cq of SMP I/O is returned normally. If the cq of SMP I/O is returned with exception actually SMP TAS is never unmapped. Relocate DMA unmap of SMP task to fix the issue. Link: https://lore.kernel.org/r/1657823002-139010-4-git-send-email-john.garry@huawei.com Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-18scsi: hisi_sas: Remove unnecessary variable to hold DMA map elementsXiang Chen1-25/+18
Use slot->n_elem to store the return value of dma_map_sg() for SSP and SMP IOs, and remove unnecessary variable n_elem_req. Link: https://lore.kernel.org/r/1657823002-139010-3-git-send-email-john.garry@huawei.com Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-18scsi: hisi_sas: Call hisi_sas_slave_configure() from slave_configure_v3_hw()John Garry1-4/+1
There is duplicated code between slave_configure_v3_hw() and hisi_sas_slave_configure(), so call common function hisi_sas_slave_configure() from slave_configure_v3_hw(). Link: https://lore.kernel.org/r/1657823002-139010-2-git-send-email-john.garry@huawei.com Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-18scsi: mpi3mr: Delete a stray tabDan Carpenter1-1/+1
This code is indented one more tab than it should be. Link: https://lore.kernel.org/r/YtVCFshEJNC7ELid@kili Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-18scsi: mpi3mr: Unlock on error pathDan Carpenter1-1/+2
There is some clean up necessary before returning. Smatch complains: drivers/scsi/mpi3mr/mpi3mr_fw.c:4786 mpi3mr_soft_reset_handler() warn: inconsistent returns '&mrioc->reset_mutex'. Locked on : 4730 Unlocked on: 4786 Link: https://lore.kernel.org/r/YtVCEsxMU8buuMjP@kili Fixes: f10af057325c ("scsi: mpi3mr: Resource Based Metering") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-18scsi: mpi3mr: Reduce VD queue depth on detecting throttlingSreekanth Reddy3-0/+136
Reduce the VD queue depth on detecting the throttling condition. [mkp: incorporate fix for pointer cast issue reported by the test robot and Guenter Roeck] Link: https://lore.kernel.org/r/20220708195020.8323-3-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-18scsi: mpi3mr: Resource Based MeteringSreekanth Reddy3-10/+280
Update driver to track cumulative pending large data size at the controller level and at the throttle group level. When one of the values meet or exceed the controller's firmware-determined high threshold value, then the driver will divert future selective I/O to the firmware. Once both controller level and at the throttle group level cumulative pending large data size reach controller's firmware determined low threshold value, then the driver will stop diverting I/Os to the firmware. Link: https://lore.kernel.org/r/20220708195020.8323-2-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-18net: lan966x: Fix usage of lan966x->mac_lock when used by FDBHoratiu Vultur1-11/+23
When the SW bridge was trying to add/remove entries to/from HW, the access to HW was not protected by any lock. In this way, it was possible to have race conditions. Fix this by using the lan966x->mac_lock to protect parallel access to HW for this cases. Fixes: 25ee9561ec622 ("net: lan966x: More MAC table functionality") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-18net: lan966x: Fix usage of lan966x->mac_lock inside lan966x_mac_irq_handlerHoratiu Vultur1-7/+12
The problem with this spin lock is that it was just protecting the list of the MAC entries in SW and not also the access to the MAC entries in HW. Because the access to HW is indirect, then it could happen to have race conditions. For example when SW introduced an entry in MAC table and the irq mac is trying to read something from the MAC. Update such that also the access to MAC entries in HW is protected by this lock. Fixes: 5ccd66e01cbef ("net: lan966x: add support for interrupts from analyzer") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-18net: lan966x: Fix usage of lan966x->mac_lock when entry is removedHoratiu Vultur1-4/+20
To remove an entry to the MAC table, it is required first to setup the entry and then issue a command for the MAC to forget the entry. So if it happens for two threads to remove simultaneously an entry in MAC table then it would be a race condition. Fix this by using lan966x->mac_lock to protect the HW access. Fixes: e18aba8941b40 ("net: lan966x: add mactable support") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-18net: lan966x: Fix usage of lan966x->mac_lock when entry is addedHoratiu Vultur1-1/+7
To add an entry to the MAC table, it is required first to setup the entry and then issue a command for the MAC to learn the entry. So if it happens for two threads to add simultaneously an entry in MAC table then it would be a race condition. Fix this by using lan966x->mac_lock to protect the HW access. Fixes: fc0c3fe7486f2 ("net: lan966x: Add function lan966x_mac_ip_learn()") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-18net: lan966x: Fix taking rtnl_lock while holding spin_lockHoratiu Vultur1-9/+18
When the HW deletes an entry in MAC table then it generates an interrupt. The SW will go through it's own list of MAC entries and if it is not found then it would notify the listeners about this. The problem is that when the SW will go through it's own list it would take a spin lock(lan966x->mac_lock) and when it notifies that the entry is deleted. But to notify the listeners it taking the rtnl_lock which is illegal. This is fixed by instead of notifying right away that the entry is deleted, move the entry on a temp list and once, it checks all the entries then just notify that the entries from temp list are deleted. Fixes: 5ccd66e01cbe ("net: lan966x: add support for interrupts from analyzer") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-18clk: qcom: gcc-msm8994: use parent_hws for gpll0/4Dmitry Baryshkov1-2/+6
Use parent_hws for two remaining clocks in gcc-msm8994 that used parent_names. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220620080505.1573948-1-dmitry.baryshkov@linaro.org
2022-07-18scsi: sg: Allow waiting for commands to complete on removed deviceTony Battersby1-20/+33
When a SCSI device is removed while in active use, currently sg will immediately return -ENODEV on any attempt to wait for active commands that were sent before the removal. This is problematic for commands that use SG_FLAG_DIRECT_IO since the data buffer may still be in use by the kernel when userspace frees or reuses it after getting ENODEV, leading to corrupted userspace memory (in the case of READ-type commands) or corrupted data being sent to the device (in the case of WRITE-type commands). This has been seen in practice when logging out of a iscsi_tcp session, where the iSCSI driver may still be processing commands after the device has been marked for removal. Change the policy to allow userspace to wait for active sg commands even when the device is being removed. Return -ENODEV only when there are no more responses to read. Link: https://lore.kernel.org/r/5ebea46f-fe83-2d0b-233d-d0dcb362dd0a@cybernetics.com Cc: <stable@vger.kernel.org> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-18scsi: qla2xxx: Update version to 10.02.07.800-kNilesh Javali1-2/+2
Link: https://lore.kernel.org/r/20220713052045.10683-11-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-18scsi: qla2xxx: Update manufacturer detailsBikash Hazarika2-2/+2
Update manufacturer details to indicate Marvell Semiconductors. Link: https://lore.kernel.org/r/20220713052045.10683-10-njavali@marvell.com Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Bikash Hazarika <bhazarika@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-18scsi: qla2xxx: Fix sparse warning for dport_dataNilesh Javali1-2/+2
Use le16_to_cpu to fix sparse warning reported for dport_data. sparse warnings: (new ones prefixed by >>) >> drivers/scsi/qla2xxx/qla_bsg.c:2485:34: sparse: sparse: incorrect >> type in assignment (different base types) @@ expected unsigned >> short [usertype] mbx1 @@ got restricted __le16 @@ drivers/scsi/qla2xxx/qla_bsg.c:2485:34: sparse: expected unsigned short [usertype] mbx1 drivers/scsi/qla2xxx/qla_bsg.c:2485:34: sparse: got restricted __le16 >> drivers/scsi/qla2xxx/qla_bsg.c:2486:34: sparse: sparse: >> incorrect type in assignment (different base types) @@ >> expected unsigned short [usertype] mbx2 @@ got restricted __le16 @@ drivers/scsi/qla2xxx/qla_bsg.c:2486:34: sparse: expected unsigned short [usertype] mbx2 drivers/scsi/qla2xxx/qla_bsg.c:2486:34: sparse: got restricted __le16 Link: https://lore.kernel.org/r/20220713052045.10683-9-njavali@marvell.com Fixes: 476da8faa336 ("scsi: qla2xxx: Add a new v2 dport diagnostic feature") Cc: stable@vger.kernel.org Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-18scsi: qla2xxx: Fix discovery issues in FC-AL topologyArun Easi3-2/+35
A direct attach tape device, when gets swapped with another, was not discovered. Fix this by looking at loop map and reinitialize link if there are devices present. Link: https://lore.kernel.org/linux-scsi/baef87c3-5dad-3b47-44c1-6914bfc90108@cybernetics.com/ Link: https://lore.kernel.org/r/20220713052045.10683-8-njavali@marvell.com Cc: stable@vger.kernel.org Reported-by: Tony Battersby <tonyb@cybernetics.com> Tested-by: Tony Battersby <tonyb@cybernetics.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-18scsi: qla2xxx: Fix imbalance vha->vref_countQuinn Tran1-0/+4
vref_count took an extra decrement in the task management path. Add an extra ref count to compensate the imbalance. Link: https://lore.kernel.org/r/20220713052045.10683-7-njavali@marvell.com Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-18scsi: qla2xxx: edif: Fix dropped IKE messageQuinn Tran1-30/+24
This patch fixes IKE message being dropped due to error in processing Purex IOCB and Continuation IOCBs. Link: https://lore.kernel.org/r/20220713052045.10683-6-njavali@marvell.com Fixes: fac2807946c1 ("scsi: qla2xxx: edif: Add extraction of auth_els from the wire") Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-18scsi: qla2xxx: Fix response queue handler reading stale packetsArun Easi3-1/+35
On some platforms, the current logic of relying on finding new packet solely based on signature pattern can lead to driver reading stale packets. Though this is a bug in those platforms, reduce such exposures by limiting reading packets until the IN pointer. Two module parameters are introduced: ql2xrspq_follow_inptr: When set, on newer adapters that has queue pointer shadowing, look for response packets only until response queue in pointer. When reset, response packets are read based on a signature pattern logic (old way). ql2xrspq_follow_inptr_legacy: Like ql2xrspq_follow_inptr, but for those adapters where there is no queue pointer shadowing. Link: https://lore.kernel.org/r/20220713052045.10683-5-njavali@marvell.com Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-18scsi: qla2xxx: Zero undefined mailbox IN registersBikash Hazarika1-0/+2
While requesting a new mailbox command, driver does not write any data to unused registers. Initialize the unused register value to zero while requesting a new mailbox command to prevent stale entry access by firmware. Link: https://lore.kernel.org/r/20220713052045.10683-4-njavali@marvell.com Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Bikash Hazarika <bhazarika@marvell.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-18scsi: qla2xxx: Fix incorrect display of max frame sizeBikash Hazarika4-9/+7
Replace display field with the correct field. Link: https://lore.kernel.org/r/20220713052045.10683-3-njavali@marvell.com Fixes: 8777e4314d39 ("scsi: qla2xxx: Migrate NVME N2N handling into state machine") Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Bikash Hazarika <bhazarika@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.