aboutsummaryrefslogtreecommitdiffstats
path: root/firmware/README.AddingFirmware (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2014-10-01net_sched: avoid calling tcf_unbind_filter() in call_rcu callbackWANG Cong2-9/+7
This fixes the following crash: [ 63.976822] general protection fault: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC [ 63.980094] CPU: 1 PID: 15 Comm: ksoftirqd/1 Not tainted 3.17.0-rc6+ #648 [ 63.980094] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 63.980094] task: ffff880117dea690 ti: ffff880117dfc000 task.ti: ffff880117dfc000 [ 63.980094] RIP: 0010:[<ffffffff817e6d07>] [<ffffffff817e6d07>] u32_destroy_key+0x27/0x6d [ 63.980094] RSP: 0018:ffff880117dffcc0 EFLAGS: 00010202 [ 63.980094] RAX: ffff880117dea690 RBX: ffff8800d02e0820 RCX: 0000000000000000 [ 63.980094] RDX: 0000000000000001 RSI: 0000000000000002 RDI: 6b6b6b6b6b6b6b6b [ 63.980094] RBP: ffff880117dffcd0 R08: 0000000000000000 R09: 0000000000000000 [ 63.980094] R10: 00006c0900006ba8 R11: 00006ba100006b9d R12: 0000000000000001 [ 63.980094] R13: ffff8800d02e0898 R14: ffffffff817e6d4d R15: ffff880117387a30 [ 63.980094] FS: 0000000000000000(0000) GS:ffff88011a800000(0000) knlGS:0000000000000000 [ 63.980094] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 63.980094] CR2: 00007f07e6732fed CR3: 000000011665b000 CR4: 00000000000006e0 [ 63.980094] Stack: [ 63.980094] ffff88011a9cd300 ffffffff82051ac0 ffff880117dffce0 ffffffff817e6d68 [ 63.980094] ffff880117dffd70 ffffffff810cb4c7 ffffffff810cb3cd ffff880117dfffd8 [ 63.980094] ffff880117dea690 ffff880117dea690 ffff880117dfffd8 000000000000000a [ 63.980094] Call Trace: [ 63.980094] [<ffffffff817e6d68>] u32_delete_key_freepf_rcu+0x1b/0x1d [ 63.980094] [<ffffffff810cb4c7>] rcu_process_callbacks+0x3bb/0x691 [ 63.980094] [<ffffffff810cb3cd>] ? rcu_process_callbacks+0x2c1/0x691 [ 63.980094] [<ffffffff817e6d4d>] ? u32_destroy_key+0x6d/0x6d [ 63.980094] [<ffffffff810780a4>] __do_softirq+0x142/0x323 [ 63.980094] [<ffffffff810782a8>] run_ksoftirqd+0x23/0x53 [ 63.980094] [<ffffffff81092126>] smpboot_thread_fn+0x203/0x221 [ 63.980094] [<ffffffff81091f23>] ? smpboot_unpark_thread+0x33/0x33 [ 63.980094] [<ffffffff8108e44d>] kthread+0xc9/0xd1 [ 63.980094] [<ffffffff819e00ea>] ? do_wait_for_common+0xf8/0x125 [ 63.980094] [<ffffffff8108e384>] ? __kthread_parkme+0x61/0x61 [ 63.980094] [<ffffffff819e43ec>] ret_from_fork+0x7c/0xb0 [ 63.980094] [<ffffffff8108e384>] ? __kthread_parkme+0x61/0x61 tp could be freed in call_rcu callback too, the order is not guaranteed. John Fastabend says: ==================== Its worth noting why this is safe. Any running schedulers will either read the valid class field or it will be zeroed. All schedulers today when the class is 0 do a lookup using the same call used by the tcf_exts_bind(). So even if we have a running classifier hit the null class pointer it will do a lookup and get to the same result. This is particularly fragile at the moment because the only way to verify this is to audit the schedulers call sites. ==================== Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01net_sched: fix another crash in cls_tcindexWANG Cong1-3/+9
This patch fixes the following crash: [ 166.670795] BUG: unable to handle kernel NULL pointer dereference at (null) [ 166.674230] IP: [<ffffffff814b739f>] __list_del_entry+0x5c/0x98 [ 166.674230] PGD d0ea5067 PUD ce7fc067 PMD 0 [ 166.674230] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC [ 166.674230] CPU: 1 PID: 775 Comm: tc Not tainted 3.17.0-rc6+ #642 [ 166.674230] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 166.674230] task: ffff8800d03c4d20 ti: ffff8800cae7c000 task.ti: ffff8800cae7c000 [ 166.674230] RIP: 0010:[<ffffffff814b739f>] [<ffffffff814b739f>] __list_del_entry+0x5c/0x98 [ 166.674230] RSP: 0018:ffff8800cae7f7d0 EFLAGS: 00010207 [ 166.674230] RAX: 0000000000000000 RBX: ffff8800cba8d700 RCX: ffff8800cba8d700 [ 166.674230] RDX: 0000000000000000 RSI: dead000000200200 RDI: ffff8800cba8d700 [ 166.674230] RBP: ffff8800cae7f7d0 R08: 0000000000000001 R09: 0000000000000001 [ 166.674230] R10: 0000000000000000 R11: 000000000000859a R12: ffffffffffffffe8 [ 166.674230] R13: ffff8800cba8c5b8 R14: 0000000000000001 R15: ffff8800cba8d700 [ 166.674230] FS: 00007fdb5f04a740(0000) GS:ffff88011a800000(0000) knlGS:0000000000000000 [ 166.674230] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 166.674230] CR2: 0000000000000000 CR3: 00000000cf929000 CR4: 00000000000006e0 [ 166.674230] Stack: [ 166.674230] ffff8800cae7f7e8 ffffffff814b73e8 ffff8800cba8d6e8 ffff8800cae7f828 [ 166.674230] ffffffff817caeec 0000000000000046 ffff8800cba8c5b0 ffff8800cba8c5b8 [ 166.674230] 0000000000000000 0000000000000001 ffff8800cf8e33e8 ffff8800cae7f848 [ 166.674230] Call Trace: [ 166.674230] [<ffffffff814b73e8>] list_del+0xd/0x2b [ 166.674230] [<ffffffff817caeec>] tcf_action_destroy+0x4c/0x71 [ 166.674230] [<ffffffff817ca0ce>] tcf_exts_destroy+0x20/0x2d [ 166.674230] [<ffffffff817ec2b5>] tcindex_delete+0x196/0x1b7 struct list_head can not be simply copied and we should always init it. Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01vxlan: Set inner protocol before transmitTom Herbert1-0/+4
Call skb_set_inner_protocol to set inner Ethernet protocol to ETH_P_TEB before transmit. This is needed for GSO with UDP tunnels. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01gre: Set inner protocol in v4 and v6 GRE transmitTom Herbert2-2/+8
Call skb_set_inner_protocol to set inner Ethernet protocol to protocol being encapsulation by GRE before tunnel_xmit. This is needed for GSO if UDP encapsulation (fou) is being done. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01ipip: Set inner IP protocol in ipipTom Herbert1-0/+2
Call skb_set_inner_ipproto to set inner IP protocol to IPPROTO_IPV4 before tunnel_xmit. This is needed if UDP encapsulation (fou) is being done. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01sit: Set inner IP protocol in sitTom Herbert1-0/+4
Call skb_set_inner_ipproto to set inner IP protocol to IPPROTO_IPV6 before tunnel_xmit. This is needed if UDP encapsulation (fou) is being done. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01udp: Generalize skb_udp_segmentTom Herbert4-9/+73
skb_udp_segment is the function called from udp4_ufo_fragment to segment a UDP tunnel packet. This function currently assumes segmentation is transparent Ethernet bridging (i.e. VXLAN encapsulation). This patch generalizes the function to operate on either Ethertype or IP protocol. The inner_protocol field must be set to the protocol of the inner header. This can now be either an Ethertype or an IP protocol (in a union). A new flag in the skbuff indicates which type is effective. skb_set_inner_protocol and skb_set_inner_ipproto helper functions were added to set the inner_protocol. These functions are called from the point where the tunnel encapsulation is occuring. When skb_udp_tunnel_segment is called, the function to segment the inner packet is selected based on the inner IP or Ethertype. In the case of an IP protocol encapsulation, the function is derived from inet[6]_offloads. In the case of Ethertype, skb->protocol is set to the inner_protocol and skb_mac_gso_segment is called. (GRE currently does this, but it might be possible to lookup the protocol in offload_base and call the appropriate segmenation function directly). Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01bpf: add tests to verifier testsuiteAlexei Starovoitov1-0/+130
add 4 extra tests to cover jump verification better Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01bpf: add search pruning optimization to verifierAlexei Starovoitov1-0/+146
consider C program represented in eBPF: int filter(int arg) { int a, b, c, *ptr; if (arg == 1) ptr = &a; else if (arg == 2) ptr = &b; else ptr = &c; *ptr = 0; return 0; } eBPF verifier has to follow all possible paths through the program to recognize that '*ptr = 0' instruction would be safe to execute in all situations. It's doing it by picking a path towards the end and observes changes to registers and stack at every insn until it reaches bpf_exit. Then it comes back to one of the previous branches and goes towards the end again with potentially different values in registers. When program has a lot of branches, the number of possible combinations of branches is huge, so verifer has a hard limit of walking no more than 32k instructions. This limit can be reached and complex (but valid) programs could be rejected. Therefore it's important to recognize equivalent verifier states to prune this depth first search. Basic idea can be illustrated by the program (where .. are some eBPF insns): 1: .. 2: if (rX == rY) goto 4 3: .. 4: .. 5: .. 6: bpf_exit In the first pass towards bpf_exit the verifier will walk insns: 1, 2, 3, 4, 5, 6 Since insn#2 is a branch the verifier will remember its state in verifier stack to come back to it later. Since insn#4 is marked as 'branch target', the verifier will remember its state in explored_states[4] linked list. Once it reaches insn#6 successfully it will pop the state recorded at insn#2 and will continue. Without search pruning optimization verifier would have to walk 4, 5, 6 again, effectively simulating execution of insns 1, 2, 4, 5, 6 With search pruning it will check whether state at #4 after jumping from #2 is equivalent to one recorded in explored_states[4] during first pass. If there is an equivalent state, verifier can prune the search at #4 and declare this path to be safe as well. In other words two states at #4 are equivalent if execution of 1, 2, 3, 4 insns and 1, 2, 4 insns produces equivalent registers and stack. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01net: fec: implement rx_copybreak to improve rx performanceNimrod Andy2-65/+145
- Copy short frames and keep the buffers mapped, re-allocate skb instead of memory copy for long frames. - Add support for setting/getting rx_copybreak using generic ethtool tunable Changes V3: * As Eric Dumazet's suggestion that removing the copybreak module parameter and only keep the ethtool API support for rx_copybreak. Changes V2: * Implements rx_copybreak * Rx_copybreak provides module parameter to change this value * Add tunable_ops support for rx_copybreak Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01net: avoid one atomic operation in skb_clone()Eric Dumazet1-6/+17
Fast clone cloning can actually avoid an atomic_inc(), if we guarantee prior clone_ref value is 1. This requires a change kfree_skbmem(), to perform the atomic_dec_and_test() on clone_ref before setting fclone to SKB_FCLONE_UNAVAILABLE. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01net/dccp/ccid.c: add __init to ccid_activateFabian Frederick1-1/+1
ccid_activate is only called by __init ccid_initialize_builtins in same module. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01net/dccp/proto.c: add __init to dccp_mib_initFabian Frederick1-1/+1
dccp_mib_init is only called by __init dccp_init in same module. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01r8169: add support for Byte Queue LimitsFlorian Westphal1-4/+14
tested on RTL8168d/8111d model using 'super_netperf 40' with TCP/UDP_STREAM. Output of while true; do for n in inflight limit; do echo -n $n\ ; cat $n; done; sleep 1; done during netperf run, 100mbit peer: inflight 0 limit 3028 inflight 6056 limit 4542 [ trimmed output for brevity, no limit/inflight changes during test steady-state ] limit 4542 inflight 3028 limit 6122 inflight 0 limit 6122 [ changed cable to 1gbit peer, restart netperf ] inflight 37850 limit 36336 inflight 33308 limit 31794 inflight 33308 limit 31794 inflight 27252 limit 25738 [ again, no changes during test ] inflight 27252 limit 25738 inflight 0 limit 28766 [ change cable to 100mbit peer, restart netperf ] limit 28766 inflight 27370 limit 28766 inflight 4542 limit 5990 inflight 6056 limit 4542 [ .. ] inflight 6056 limit 4542 inflight 0 [end of test] Cc: Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes Wang <hayeswang@realtek.com> Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01net: cleanup and document skb fclone layoutEric Dumazet4-28/+47
Lets use a proper structure to clearly document and implement skb fast clones. Then, we might experiment more easily alternative layouts. This patch adds a new skb_fclone_busy() helper, used by tcp and xfrm, to stop leaking of implementation details. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01tcp: abort orphan sockets stalling on zero window probesYuchung Cheng2-21/+22
Currently we have two different policies for orphan sockets that repeatedly stall on zero window ACKs. If a socket gets a zero window ACK when it is transmitting data, the RTO is used to probe the window. The socket is aborted after roughly tcp_orphan_retries() retries (as in tcp_write_timeout()). But if the socket was idle when it received the zero window ACK, and later wants to send more data, we use the probe timer to probe the window. If the receiver always returns zero window ACKs, icsk_probes keeps getting reset in tcp_ack() and the orphan socket can stall forever until the system reaches the orphan limit (as commented in tcp_probe_timer()). This opens up a simple attack to create lots of hanging orphan sockets to burn the memory and the CPU, as demonstrated in the recent netdev post "TCP connection will hang in FIN_WAIT1 after closing if zero window is advertised." http://www.spinics.net/lists/netdev/msg296539.html This patch follows the design in RTO-based probe: we abort an orphan socket stalling on zero window when the probe timer reaches both the maximum backoff and the maximum RTO. For example, an 100ms RTT connection will timeout after roughly 153 seconds (0.3 + 0.6 + .... + 76.8) if the receiver keeps the window shut. If the orphan socket passes this check, but the system already has too many orphans (as in tcp_out_of_resources()), we still abort it but we'll also send an RST packet as the connection may still be active. In addition, we change TCP_USER_TIMEOUT to cover (life or dead) sockets stalled on zero-window probes. This changes the semantics of TCP_USER_TIMEOUT slightly because it previously only applies when the socket has pending transmission. Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Reported-by: Andrey Dmitrov <andrey.dmitrov@oktetlabs.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01cipso: add __init to cipso_v4_cache_initFabian Frederick1-1/+1
cipso_v4_cache_init is only called by __init cipso_v4_init Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01inet: frags: add __init to ip4_frags_ctl_registerFabian Frederick1-2/+2
ip4_frags_ctl_register is only called by __init ipfrag_init Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01tcp: add __init to tcp_init_memFabian Frederick1-1/+1
tcp_init_mem is only called by __init tcp_init. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01r8169:call "rtl8168_driver_start" "rtl8168_driver_stop" only when hardware dash function is enabledChun-Hao Lin1-6/+8
These two functions are used to inform dash firmware that driver is been brought up or brought down. So call these two functions only when hardware dash function is enabled. Signed-off-by: Chun-Hao Lin <hau@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01r8169:modify the behavior of function "rtl8168_oob_notify"Chun-Hao Lin1-53/+46
In function "rtl8168_oob_notify", using function "rtl_eri_write" to access eri register 0xe8, instead of using MAC register "ERIDR" and "ERIAR" to access it. For using function "rtl_eri_write" in function "rtl8168_oob_notify", need to move down "rtl8168_oob_notify" related functions under the function "rtl_eri_write". Signed-off-by: Chun-Hao Lin <hau@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01r8169:change the name of function "r8168dp_check_dash" to "r8168_check_dash"Chun-Hao Lin1-2/+2
DASH function not only RTL8168DP can support, but also RTL8168EP. So change the name of function "r8168dp_check_dash" to "r8168_check_dash". Signed-off-by: Chun-Hao Lin <hau@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01r8169:change the name of function"rtl_w1w0_eri"Chun-Hao Lin1-29/+29
Change the name of function "rtl_w1w0_eri" to "rtl_w0w1_eri". In this function, the local variable "val" is "write zeros then write ones". Please see below code. (val & ~m) | p In this patch, change the function name from "xx_w1w0_xx" to "xx_w0w1_xx". The changed function name is more suitable for it's behavior. Signed-off-by: Chun-Hao Lin <hau@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01r8169:for function "rtl_w1w0_phy" change its name and behaviorChun-Hao Lin1-88/+88
Change function name from "rtl_w1w0_phy" to "rtl_w0w1_phy". And its behavior from "write ones then write zeros" to "write zeros then write ones". In Realtek internal driver, bitwise operations are almost "write zeros then write ones". For easy to port hardware parameters from Realtek internal driver to Linux kernal driver "r8169", we would like to change this function's behavior and its name. Signed-off-by: Chun-Hao Lin <hau@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01r8169:add more chips to support magic packet v2Chun-Hao Lin1-0/+36
For RTL8168F RTL8168FB RTL8168G RTL8168GU RTL8411 RTL8411B RTL8402 RTL8107E, the magic packet enable bit is changed to eri 0xde bit0. In this patch, change magic packet enable bit of these chips to eri 0xde bit0. Signed-off-by: Chun-Hao Lin <hau@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01r8169:add support more chips to get mac address from backup mac address registerChun-Hao Lin1-1/+10
RTL8168FB RTL8168G RTL8168GU RTL8411 RTL8411B RTL8106EUS RTL8402 can support get mac address from backup mac address register. Signed-off-by: Chun-Hao Lin <hau@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01r8169:add disable/enable RTL8411B pll functionChun-Hao Lin1-0/+2
RTL8411B can support disable/enable pll function. Signed-off-by: Chun-Hao Lin <hau@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01r8169:add disable/enable RTL8168G pll functionChun-Hao Lin1-0/+2
RTL8168G also can disable/enable pll function. Signed-off-by: Chun-Hao Lin <hau@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01r8169:change uppercase number to lowercase numberChun-Hao Lin1-9/+9
Signed-off-by: Chun-Hao Lin <hau@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01sunvnet: fix potential NULL pointer dereferenceDavid L Stevens1-1/+1
One of the error cases for vnet_start_xmit()'s "out_dropped" label is port == NULL, so only mess with port->clean_timer when port is not NULL. Signed-off-by: David L Stevens <david.stevens@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01net: dsa: Fix build warning for !PM_SLEEPThierry Reding1-0/+2
The dsa_switch_suspend() and dsa_switch_resume() functions are only used when PM_SLEEP is enabled, so they need #ifdef CONFIG_PM_SLEEP protection to avoid a compiler warning. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01net: ll_temac: Remove unnecessary ether_setup after alloc_etherdevSubbaraya Sundeep Bhatta1-1/+0
Calling ether_setup is redundant since alloc_etherdev calls it. Signed-off-by: Subbaraya Sundeep Bhatta <sbhatta@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01ipv4: mentions skb_gro_postpull_rcsum() in inet_gro_receive()Eric Dumazet1-0/+3
Proper CHECKSUM_COMPLETE support needs to adjust skb->csum when we remove one header. Its done using skb_gro_postpull_rcsum() In the case of IPv4, we know that the adjustment is not really needed, because the checksum over IPv4 header is 0. Lets add a comment to ease code comprehension and avoid copy/paste errors. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01fm10k: using vmalloc requires including linux/vmalloc.hStephen Rothwell1-0/+2
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01ieee802154: fix __init functionsFabian Frederick1-2/+2
Commit 3243acd37fd9 ("ieee802154: add __init to lowpan_frags_sysctl_register") added __init to lowpan_frags_ns_sysctl_register instead of lowpan_frags_sysctl_register Suggested-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30sunvnet: generate ICMP PTMUD messages for smaller port MTUsDavid L Stevens1-1/+36
This patch sends ICMP and ICMPv6 messages for Path MTU Discovery when a remote port MTU is smaller than the device MTU. This allows mixing newer VIO protocol devices that support MTU negotiation with older devices that do not on the same vswitch. It also allows Linux-Linux LDOMs to use 64K-1 data packets even though Solaris vswitch is limited to <16K MTU. Signed-off-by: David L Stevens <david.stevens@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30sunvnet: allow admin to set sunvnet MTUDavid L Stevens3-5/+10
This patch allows an admin to set the MTU on a sunvnet device to arbitrary values between the minimum (68) and maximum (65535) IPv4 packet sizes. Signed-off-by: David L Stevens <david.stevens@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30sunvnet: make transmit path zero-copy in the kernelDavid L Stevens2-45/+182
This patch removes pre-allocated transmit buffers and instead directly maps pending packets on demand. This saves O(n^2) maximum-sized transmit buffers, for n hosts on a vswitch, as well as a copy to those buffers. Single-stream TCP throughput linux-solaris dropped ~5% for 1500-byte MTU, but linux-linux at 1500-bytes increased ~20%. Signed-off-by: David L Stevens <david.stevens@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30sunvnet: upgrade to VIO protocol version 1.6David L Stevens4-22/+143
This patch upgrades the sunvnet driver to support VIO protocol version 1.6. In particular, it adds per-port MTU negotiation, allowing MTUs other than ETH_FRAMELEN with ports using newer VIO protocol versions. Signed-off-by: David L Stevens <david.stevens@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30tcp: Change tcp_slow_start function to return voidLi RongQing2-4/+2
No caller uses the return value, so make this function return void. Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30ieee802154: add __init to lowpan_frags_sysctl_registerFabian Frederick1-2/+2
lowpan_frags_sysctl_register is only called by __init lowpan_net_frag_init (part of the lowpan module). Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30irda: add __init to irlan_openFabian Frederick1-2/+2
irlan_open is only called by __init irlan_init in same module. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30next: mips: bpf: Fix build failureGuenter Roeck1-1/+0
Fix: arch/mips/net/bpf_jit.c: In function 'build_body': arch/mips/net/bpf_jit.c:762:6: error: unused variable 'tmp' cc1: all warnings being treated as errors make[2]: *** [arch/mips/net/bpf_jit.o] Error 1 Seen when building mips:allmodconfig in -next since next-20140924. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30ARM: dts: berlin: enable the Ethernet port on the BG2Q DMPAntoine Ténart1-0/+4
This patch enables the Ethernet port on the Marvell Berlin2Q DMP board. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30ARM: dts: berlin: add the Ethernet nodeAntoine Ténart1-0/+17
This patch adds the Ethernet node, enabling the network unit on Berlin BG2Q SoCs. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30net: pxa168_eth: allow to compile the pxa168_eth driver for testsAntoine Ténart1-1/+1
Add a dependency to COMPILE_TEST so that the driver can be compiled for test purposes. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30net: pxa168_eth: allow Berlin SoCs to use the pxa168_eth driverAntoine Ténart1-1/+1
Berlin SoCs have an Ethernet controller compatible with the pxa168. Allow these SoCs to use the pxa168_eth driver. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30net: pxa168_eth: rework the MAC address setupAntoine Ténart1-2/+30
This patch rework the way the MAC address is retrieved. The MAC address can now, in addition to being random, be set in the device tree or retrieved from the Ethernet controller MAC address registers. The probing function will try to get a MAC address in the following order: - From the device tree. - From the Ethernet controller MAC address registers. - Generate a random one. This patch also adds a function to read the MAC address from the Ethernet Controller registers. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30net: pxa168_eth: set the mac address on the Ethernet controllerAntoine Ténart1-0/+13
When changing the MAC address, in addition to updating the dev_addr in the net_device structure, this patch also update the MAC address registers (high and low) of the Ethernet controller with the new MAC. The address stored in these registers is used for IEEE 802.3x Ethernet flow control, which is already enabled. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30net: pxa168_eth: fix Ethernet flow control statusAntoine Ténart1-2/+2
IEEE 802.3x Ethernet flow control is disabled when bit (1 << 2) is set in the port status register. Fix the flow control detection in the link event handling function which was relying on the opposite assumption. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.