Age | Commit message (Collapse) | Author | Files | Lines |
|
For ethtype_key = ETH_P_IPV6, set filter type as 1 in cxgb4_tc_flower
code when processing flow match parameters.
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The new helper would check if the pfn belongs to the page. For huge
pages it checks if the PFN is within range covered by the huge page.
The helper is used in check_pte(). The original code the helper replaces
had two call to page_to_pfn(). page_to_pfn() is relatively costly.
Although current GCC is able to optimize code to have one call, it's
better to do this explicitly.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Adds support for the current lineup of Xbox One controllers from PDP
(Performance Designed Products). These controllers are very picky with
their initialization sequence and require an additional 2 packets before
they send any input reports.
Signed-off-by: Mark Furneaux <mark@furneaux.ca>
Reviewed-by: Cameron Gutman <aicommander@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Replace the original license statement with the SPDX identifier.
Update also the copyright owner adding myself as co-owner of the
copyright.
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Tetsuo reported random crashes under memory pressure on 32-bit x86
system and tracked down to change that introduced
page_vma_mapped_walk().
The root cause of the issue is the faulty pointer math in check_pte().
As ->pte may point to an arbitrary page we have to check that they are
belong to the section before doing math. Otherwise it may lead to weird
results.
It wasn't noticed until now as mem_map[] is virtually contiguous on
flatmem or vmemmap sparsemem. Pointer arithmetic just works against all
'struct page' pointers. But with classic sparsemem, it doesn't because
each section memap is allocated separately and so consecutive pfns
crossing two sections might have struct pages at completely unrelated
addresses.
Let's restructure code a bit and replace pointer arithmetic with
operations on pfns.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-and-tested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Acked-by: Michal Hocko <mhocko@suse.com>
Fixes: ace71a19cec5 ("mm: introduce page_vma_mapped_walk()")
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Helmut reported a bug about division by zero while
running traffic and doing physical cable pull test.
When the cable unplugged the ppms become zero, so when
dividing the current ppms by the previous ppms in the
next dim iteration there is division by zero.
This patch prevent this division for both ppms and epms.
Fixes: c3164d2fc48f ("net/mlx5e: Added BW check for DIM decision mechanism")
Reported-by: Helmut Grauer <helmut.grauer@de.ibm.com>
Signed-off-by: Talat Batheesh <talatb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
Commit bacf6b499e11 ("x86/mm: Use a struct to reduce parameters for SME
PGD mapping") moved some parameters into a structure.
The structure was large enough to trigger the stack protection canary in
sme_encrypt_kernel which doesn't work this early, causing reboots.
Mark sme_encrypt_kernel appropriately to not use the canary.
Fixes: bacf6b499e11 ("x86/mm: Use a struct to reduce parameters for SME PGD mapping")
Signed-off-by: Laura Abbott <labbott@redhat.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The conversion of the alpha architecture PCI host bridge legacy IRQ
mapping/swizzling to the new PCI host bridge map/swizzle hooks carried
out through:
commit 0e4c2eeb758a ("alpha/PCI: Replace pci_fixup_irqs() call with
host bridge IRQ mapping hooks")
implies that IRQ for devices are now allocated through pci_assign_irq()
function in pci_device_probe() that is called when a driver matching a
device is found in order to probe the device through the device driver.
Alpha noname platforms required IRQ level programming to be executed
in sio_fixup_irq_levels(), that is called in noname_init_pci(), a
platform hook called within a subsys_initcall.
In noname_init_pci(), present IRQs are detected through
sio_collect_irq_levels() that check the struct pci_dev->irq number
to detect if an IRQ has been allocated for the device.
By the time sio_collect_irq_levels() is called, some devices may still
have not a matching driver loaded to match them (eg loadable module)
therefore their IRQ allocation is still pending - which means that
sio_collect_irq_levels() does not programme the correct IRQ level for
those devices, causing their IRQ handling to be broken when the device
driver is actually loaded and the device is probed.
Fix the issue by adding code in the noname map_irq() function
(noname_map_irq()) that, whilst mapping/swizzling the IRQ line, it also
ensures that the correct IRQ level programming is executed at platform
level, fixing the issue.
Fixes: 0e4c2eeb758a ("alpha/PCI: Replace pci_fixup_irqs() call with
host bridge IRQ mapping hooks")
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: stable@vger.kernel.org # 4.14
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Meelis Roos <mroos@linux.ee>
Signed-off-by: Matt Turner <mattst88@gmail.com>
|
|
The new firmware interfaces for branch prediction behaviour changes
are transparently available for the guest. Nevertheless, there is
new state attached that should be migrated and properly resetted.
Provide a mechanism for handling reset, migration and VSIE.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
[Changed capability number to 152. - Radim]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
Force __builtin_constant_p to evaluate whether the argument to atomic_add
& atomic_sub is constant in the front-end before optimisations which
can lead GCC to output a call to __bad_increment_for_ia64_fetch_and_add().
See GCC bugzilla 83653.
Signed-off-by: Jakub Jelinek <jakub@redhat.com>
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Without this patch, I drown in a sea of unknown attribute warnings
Link: http://lkml.kernel.org/r/20180117024539.27354-1-willy@infradead.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
do_task_stat() accesses IP and SP of a task without bumping reference
count of a stack (which became an entity with independent lifetime at
some point).
Steps to reproduce:
#include <stdio.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <sys/time.h>
#include <sys/resource.h>
#include <unistd.h>
#include <sys/wait.h>
int main(void)
{
setrlimit(RLIMIT_CORE, &(struct rlimit){});
while (1) {
char buf[64];
char buf2[4096];
pid_t pid;
int fd;
pid = fork();
if (pid == 0) {
*(volatile int *)0 = 0;
}
snprintf(buf, sizeof(buf), "/proc/%u/stat", pid);
fd = open(buf, O_RDONLY);
read(fd, buf2, sizeof(buf2));
close(fd);
waitpid(pid, NULL, 0);
}
return 0;
}
BUG: unable to handle kernel paging request at 0000000000003fd8
IP: do_task_stat+0x8b4/0xaf0
PGD 800000003d73e067 P4D 800000003d73e067 PUD 3d558067 PMD 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 0 PID: 1417 Comm: a.out Not tainted 4.15.0-rc8-dirty #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1.fc27 04/01/2014
RIP: 0010:do_task_stat+0x8b4/0xaf0
Call Trace:
proc_single_show+0x43/0x70
seq_read+0xe6/0x3b0
__vfs_read+0x1e/0x120
vfs_read+0x84/0x110
SyS_read+0x3d/0xa0
entry_SYSCALL_64_fastpath+0x13/0x6c
RIP: 0033:0x7f4d7928cba0
RSP: 002b:00007ffddb245158 EFLAGS: 00000246
Code: 03 b7 a0 01 00 00 4c 8b 4c 24 70 4c 8b 44 24 78 4c 89 74 24 18 e9 91 f9 ff ff f6 45 4d 02 0f 84 fd f7 ff ff 48 8b 45 40 48 89 ef <48> 8b 80 d8 3f 00 00 48 89 44 24 20 e8 9b 97 eb ff 48 89 44 24
RIP: do_task_stat+0x8b4/0xaf0 RSP: ffffc90000607cc8
CR2: 0000000000003fd8
John Ogness said: for my tests I added an else case to verify that the
race is hit and correctly mitigated.
Link: http://lkml.kernel.org/r/20180116175054.GA11513@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reported-by: "Kohli, Gaurav" <gkohli@codeaurora.org>
Tested-by: John Ogness <john.ogness@linutronix.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since kernel 4.9, the thread_info has been moved into task_struct, no
longer locates at the bottom of kernel stack.
See commits c65eacbe290b ("sched/core: Allow putting thread_info into
task_struct") and 15f4eae70d36 ("x86: Move thread_info into
task_struct").
Before fix:
(gdb) set $current = $lx_current()
(gdb) p $lx_thread_info($current)
$1 = {flags = 1470918301}
(gdb) p $current.thread_info
$2 = {flags = 2147483648}
After fix:
(gdb) p $lx_thread_info($current)
$1 = {flags = 2147483648}
(gdb) p $current.thread_info
$2 = {flags = 2147483648}
Link: http://lkml.kernel.org/r/20180118210159.17223-1-imxikangjie@gmail.com
Fixes: 15f4eae70d36 ("x86: Move thread_info into task_struct")
Signed-off-by: Xi Kangjie <imxikangjie@gmail.com>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Kieran Bingham <kbingham@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There are a couple of problems with the decodecode script and arm64:
1. AArch64 objdump refuses to disassemble .4byte directives as instructions,
insisting that they are data values and displaying them as:
a94153f3 .word 0xa94153f3 <-- trapping instruction
This is resolved by using the .inst directive instead.
2. Disassembly of branch instructions attempts to provide the target as
an offset from a symbol, e.g.:
0: 34000082 cbz w2, 10 <.text+0x10>
however this falls foul of the grep -v, which matches lines containing
".text" and ends up removing all branch instructions from the dump.
This patch resolves both issues by using the .inst directive for 4-byte
quantities on arm64 and stripping the resulting binaries (as is done on
arm already) to remove the mapping symbols.
Link: http://lkml.kernel.org/r/1506596147-23630-1-git-send-email-will.deacon@arm.com
Signed-off-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When setting page_owner = on, the following warning can be seen in the
boot log:
WARNING: CPU: 0 PID: 0 at mm/page_alloc.c:2537 drain_all_pages+0x171/0x1a0
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.15.0-rc7-next-20180109-1-default+ #7
Hardware name: Dell Inc. Latitude E7470/0T6HHJ, BIOS 1.11.3 11/09/2016
RIP: 0010:drain_all_pages+0x171/0x1a0
Call Trace:
init_page_owner+0x4e/0x260
start_kernel+0x3e6/0x4a6
? set_init_arg+0x55/0x55
secondary_startup_64+0xa5/0xb0
Code: c5 ed ff 89 df 48 c7 c6 20 3b 71 82 e8 f9 4b 52 00 3b 05 d7 0b f8 00 89 c3 72 d5 5b 5d 41 5
This warning is shown because we are calling drain_all_pages() in
init_early_allocated_pages(), but mm_percpu_wq is not up yet, it is being
set up later on in kernel_init_freeable() -> init_mm_internals().
Link: http://lkml.kernel.org/r/20180109153921.GA13070@techadventures.net
Signed-off-by: Oscar Salvador <osalvador@techadventures.net>
Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Ayush Mittal <ayush.m@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
James reported a bug in swap paging-in from his testing. It is that
do_swap_page doesn't release locked page so system hang-up happens due
to a deadlock on PG_locked.
It was introduced by 0bcac06f27d7 ("mm, swap: skip swapcache for swapin
of synchronous device") because I missed swap cache hit places to update
swapcache variable to work well with other logics against swapcache in
do_swap_page.
This patch fixes it.
Debugged by James Bottomley.
Link: http://lkml.kernel.org/r/<1514407817.4169.4.camel@HansenPartnership.com>
Link: http://lkml.kernel.org/r/20180102235606.GA19438@bbox
Signed-off-by: Minchan Kim <minchan@kernel.org>
Reported-by: James Bottomley <James.Bottomley@hansenpartnership.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Huang Ying <ying.huang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The generated assembler for the C fill RSB inline asm operations has
several issues:
- The C code sets up the loop register, which is then immediately
overwritten in __FILL_RETURN_BUFFER with the same value again.
- The C code also passes in the iteration count in another register, which
is not used at all.
Remove these two unnecessary operations. Just rely on the single constant
passed to the macro for the iterations.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Cc: dave.hansen@intel.com
Cc: gregkh@linuxfoundation.org
Cc: torvalds@linux-foundation.org
Cc: arjan@linux.intel.com
Link: https://lkml.kernel.org/r/20180117225328.15414-1-andi@firstfloor.org
|
|
In section <2. Runtime Cost>, fix wrong index.
Signed-off-by: zhenwei.pi <zhenwei.pi@youruncloud.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: dave.hansen@linux.intel.com
Link: https://lkml.kernel.org/r/1516237492-27739-1-git-send-email-zhenwei.pi@youruncloud.com
|
|
Since indirect jump instructions will be replaced by jump
to __x86_indirect_thunk_*, those jmp instruction must be
treated as an indirect jump. Since optprobe prohibits to
optimize probes in the function which uses an indirect jump,
it also needs to find out the function which jump to
__x86_indirect_thunk_* and disable optimization.
Add a check that the jump target address is between the
__indirect_thunk_start/end when optimizing kprobe.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/151629212062.10241.6991266100233002273.stgit@devbox
|
|
Mark __x86_indirect_thunk_* functions as blacklist for kprobes
because those functions can be called from anywhere in the kernel
including blacklist functions of kprobes.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/151629209111.10241.5444852823378068683.stgit@devbox
|
|
Introduce start/end markers of __x86_indirect_thunk_* functions.
To make it easy, consolidate .text.__x86.indirect_thunk.* sections
to one .text.__x86.indirect_thunk section and put it in the
end of kernel text section and adds __indirect_thunk_start/end
so that other subsystem (e.g. kprobes) can identify it.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/151629206178.10241.6828804696410044771.stgit@devbox
|
|
The machine check idtentry uses an indirect branch directly from the low
level code. This evades the speculation protection.
Replace it by a direct call into C code and issue the indirect call there
so the compiler can apply the proper speculation protection.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by:Borislav Petkov <bp@alien8.de>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Niced-by: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801181626290.1847@nanos
|
|
Stefan Wahren reports a problem with a warning fix that was merged
for v4.15: we had lots of device nodes with a 'phys' property pointing
to a device node that is not compliant with the binding documented in
Documentation/devicetree/bindings/phy/phy-bindings.txt
This generally works because USB HCD drivers that support both the generic
phy subsystem and the older usb-phy subsystem ignore most errors from
phy_get() and related calls and then use the usb-phy driver instead.
However, it turns out that making the usb-nop-xceiv device compatible with
the generic-phy binding changes the phy_get() return code from -EINVAL to
-EPROBE_DEFER, and the dwc2 usb controller driver for bcm2835 now returns
-EPROBE_DEFER from its probe function rather than ignoring the failure,
breaking all USB support on raspberry-pi when CONFIG_GENERIC_PHY is
enabled. The same code is used in the dwc3 driver and the usb_add_hcd()
function, so a reasonable assumption would be that many other platforms
are affected as well.
I have reviewed all the related patches and concluded that "usb-nop-xceiv"
is the only USB phy that is affected by the change, and since it is by far
the most commonly referenced phy, all the other USB phy drivers appear
to be used in ways that are are either safe in DT (they don't use the
'phys' property), or in the driver (they already ignore -EPROBE_DEFER
from generic-phy when usb-phy is available).
To work around the problem, this adds a special case to _of_phy_get()
so we ignore any PHY node that is compatible with "usb-nop-xceiv",
as we know that this can never load no matter how much we defer. In the
future, we might implement a generic-phy driver for "usb-nop-xceiv"
and then remove this workaround.
Since we generally want older kernels to also want to work with the
fixed devicetree files, it would be good to backport the patch into
stable kernels as well (3.13+ are possibly affected), even though they
don't contain any of the patches that may have caused regressions.
Fixes: 014d6da6cb25 ARM: dts: bcm283x: Fix DTC warnings about missing phy-cells
Fixes: c5bbf358b790 arm: dts: nspire: Add missing #phy-cells to usb-nop-xceiv
Fixes: 44e5dced2ef6 arm: dts: marvell: Add missing #phy-cells to usb-nop-xceiv
Fixes: f568f6f554b8 ARM: dts: omap: Add missing #phy-cells to usb-nop-xceiv
Fixes: d745d5f277bf ARM: dts: imx51-zii-rdu1: Add missing #phy-cells to usb-nop-xceiv
Fixes: 915fbe59cbf2 ARM: dts: imx: Add missing #phy-cells to usb-nop-xceiv
Link: https://marc.info/?l=linux-usb&m=151518314314753&w=2
Link: https://patchwork.kernel.org/patch/10158145/
Cc: stable@vger.kernel.org
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Eric Anholt <eric@anholt.net>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Rob Herring <robh@kernel.org>
Tested-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The DRM driver most notably, but also out of tree drivers (for now) like
the VPU or GPU drivers, are quite big consumers of large, contiguous memory
buffers. However, the sunxi_defconfig doesn't enable CMA in order to
mitigate that, which makes them almost unusable.
Enable it to make sure it somewhat works.
Cc: <stable@vger.kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
If add state fails in case of device offload, netdev refcount
will be negative since gc task is attempting to dev_free this state.
This is fixed by putting NULL in state dev field.
Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: Boris Pismeny <borisp@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
This adds a new ioctl, KVM_PPC_GET_CPU_CHAR, that gives userspace
information about the underlying machine's level of vulnerability
to the recently announced vulnerabilities CVE-2017-5715,
CVE-2017-5753 and CVE-2017-5754, and whether the machine provides
instructions to assist software to work around the vulnerabilities.
The ioctl returns two u64 words describing characteristics of the
CPU and required software behaviour respectively, plus two mask
words which indicate which bits have been filled in by the kernel,
for extensibility. The bit definitions are the same as for the
new H_GET_CPU_CHARACTERISTICS hypercall.
There is also a new capability, KVM_CAP_PPC_GET_CPU_CHAR, which
indicates whether the new ioctl is available.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
Packet descriptor generation for IPv6 is broken.
Properly set L3 and L4 protocol flags for IPv6 descriptors.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Set some missing fields in the IP control offload buffer. This buffer is
used to enable checksum and TCP segmentation offload in the VNIC server.
The buffer length field and the checksum offloading bits were not set
properly, so fix that here.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After commit 4512c43eac7e, if we add a route to the subtree of tb6_root
which does not have any route attached to it yet, the current code will
let tb6_root and the node in the subtree share the same route.
This could cause problem cause tb6_root has RTN_INFO flag marked and the
tree repair and clean up code will not work properly.
This commit makes sure tb6_root->leaf points back to null_entry instead
of sharing route with other node.
It fixes the following syzkaller reported issue:
BUG: KASAN: use-after-free in ipv6_prefix_equal include/net/ipv6.h:540 [inline]
BUG: KASAN: use-after-free in fib6_add_1+0x165f/0x1790 net/ipv6/ip6_fib.c:618
Read of size 8 at addr ffff8801bc043498 by task syz-executor5/19819
CPU: 1 PID: 19819 Comm: syz-executor5 Not tainted 4.15.0-rc7+ #186
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x194/0x257 lib/dump_stack.c:53
print_address_description+0x73/0x250 mm/kasan/report.c:252
kasan_report_error mm/kasan/report.c:351 [inline]
kasan_report+0x25b/0x340 mm/kasan/report.c:409
__asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:430
ipv6_prefix_equal include/net/ipv6.h:540 [inline]
fib6_add_1+0x165f/0x1790 net/ipv6/ip6_fib.c:618
fib6_add+0x5fa/0x1540 net/ipv6/ip6_fib.c:1214
__ip6_ins_rt+0x6c/0x90 net/ipv6/route.c:1003
ip6_route_add+0x141/0x190 net/ipv6/route.c:2790
ipv6_route_ioctl+0x4db/0x6b0 net/ipv6/route.c:3299
inet6_ioctl+0xef/0x1e0 net/ipv6/af_inet6.c:520
sock_do_ioctl+0x65/0xb0 net/socket.c:958
sock_ioctl+0x2c2/0x440 net/socket.c:1055
vfs_ioctl fs/ioctl.c:46 [inline]
do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:686
SYSC_ioctl fs/ioctl.c:701 [inline]
SyS_ioctl+0x8f/0xc0 fs/ioctl.c:692
entry_SYSCALL_64_fastpath+0x23/0x9a
RIP: 0033:0x452ac9
RSP: 002b:00007fd42b321c58 EFLAGS: 00000212 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 000000000071bea0 RCX: 0000000000452ac9
RDX: 0000000020fd7000 RSI: 000000000000890b RDI: 0000000000000013
RBP: 000000000000049e R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000212 R12: 00000000006f4f70
R13: 00000000ffffffff R14: 00007fd42b3226d4 R15: 0000000000000000
Fixes: 4512c43eac7e ("ipv6: remove null_entry before adding default route")
Signed-off-by: Wei Wang <weiwan@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit b05229f44228 ("gre6: Cleanup GREv6 transmit path,
call common GRE functions") moved dev->mtu initialization
from ip6gre_tunnel_setup() to ip6gre_tunnel_init(), as a
result, the previously set values, before ndo_init(), are
reset in the following cases:
* rtnl_create_link() can update dev->mtu from IFLA_MTU
parameter.
* ip6gre_tnl_link_config() is invoked before ndo_init() in
netlink and ioctl setup, so ndo_init() can reset MTU
adjustments with the lower device MTU as well, dev->mtu
and dev->hard_header_len.
Not applicable for ip6gretap because it has one more call
to ip6gre_tnl_link_config(tunnel, 1) in ip6gre_tap_init().
Fix the first case by updating dev->mtu with 'tb[IFLA_MTU]'
parameter if a user sets it manually on a device creation,
and fix the second one by moving ip6gre_tnl_link_config()
call after register_netdevice().
Fixes: b05229f44228 ("gre6: Cleanup GREv6 transmit path, call common GRE functions")
Fixes: db2ec95d1ba4 ("ip6_gre: Fix MTU setting")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a new LPM tree is created, we try to replace the trees in the
existing virtual routers with it. If we fail, the tree needs to be
freed.
Currently, this does not happen in the unlikely case where we fail to
bind the tree to the first virtual router, since its reference count
never transitions from 1 to 0.
Fix that by taking a reference before binding the tree.
Fixes: fc922bb0dd94 ("mlxsw: spectrum_router: Use one LPM tree for all virtual routers")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
- Fixes addition of stolen memory base address to PTEs.
- Removes support for compression.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Tested-by: Pierre Moreau <pierre.morrow@free.fr>
|
|
Commit bbb163e18960 ("drm/nouveau/bar: implement bar1 teardown")
introduced add a teardown helper function for BAR1. During
initialisation of the Nouveau, initially all the teardown helpers are
called once, before calling their init counterparts. For gk20a, after
the BAR1 teardown function is called, the device is hanging during the
initialisation of the FB sub-device. At this point it is unclear why
this is happening and this is still under investigation. However, this
change is preventing Tegra124 devices from booting when Nouveau is
enabled. To allow Tegra124 to boot, remove the teardown helper for
gk20a.
This is based upon a previous patch by Guillaume Tucker but limits
the workaround to only gk20a GPUs.
Fixes: bbb163e18960 ("drm/nouveau/bar: implement bar1 teardown")
Reported-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
This is obviously wrong in the current code. Make sure to record the
correct size of the arguments and pass the actual arguments to the
nvif_object_map_handle() function.
Suggested-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
syzbot reported yet another crash [1] that is caused by
insufficient validation of DODGY packets.
Two bugs are happening here to trigger the crash.
1) Flow dissection leaves with incorrect thoff field.
2) skb_probe_transport_header() sets transport header to this invalid
thoff, even if pointing after skb valid data.
3) qdisc_pkt_len_init() reads out-of-bound data because it
trusts tcp_hdrlen(skb)
Possible fixes :
- Full flow dissector validation before injecting bad DODGY packets in
the stack.
This approach was attempted here : https://patchwork.ozlabs.org/patch/
861874/
- Have more robust functions in the core.
This might be needed anyway for stable versions.
This patch fixes the flow dissection issue.
[1]
CPU: 1 PID: 3144 Comm: syzkaller271204 Not tainted 4.15.0-rc4-mm1+ #49
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x194/0x257 lib/dump_stack.c:53
print_address_description+0x73/0x250 mm/kasan/report.c:256
kasan_report_error mm/kasan/report.c:355 [inline]
kasan_report+0x23b/0x360 mm/kasan/report.c:413
__asan_report_load2_noabort+0x14/0x20 mm/kasan/report.c:432
__tcp_hdrlen include/linux/tcp.h:35 [inline]
tcp_hdrlen include/linux/tcp.h:40 [inline]
qdisc_pkt_len_init net/core/dev.c:3160 [inline]
__dev_queue_xmit+0x20d3/0x2200 net/core/dev.c:3465
dev_queue_xmit+0x17/0x20 net/core/dev.c:3554
packet_snd net/packet/af_packet.c:2943 [inline]
packet_sendmsg+0x3ad5/0x60a0 net/packet/af_packet.c:2968
sock_sendmsg_nosec net/socket.c:628 [inline]
sock_sendmsg+0xca/0x110 net/socket.c:638
sock_write_iter+0x31a/0x5d0 net/socket.c:907
call_write_iter include/linux/fs.h:1776 [inline]
new_sync_write fs/read_write.c:469 [inline]
__vfs_write+0x684/0x970 fs/read_write.c:482
vfs_write+0x189/0x510 fs/read_write.c:544
SYSC_write fs/read_write.c:589 [inline]
SyS_write+0xef/0x220 fs/read_write.c:581
entry_SYSCALL_64_fastpath+0x1f/0x96
Fixes: 34fad54c2537 ("net: __skb_flow_dissect() must cap its return value")
Fixes: a6e544b0a88b ("flow_dissector: Jump to exit code in __skb_flow_dissect")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since enums do not get converted by the TRACE_EVENT macro into their values,
the event format displaces the enum name and not the value. This breaks
tools like perf and trace-cmd that need to interpret the raw binary data. To
solve this, an enum map was created to convert these enums into their actual
numbers on boot up. This is done by TRACE_EVENTS() adding a
TRACE_DEFINE_ENUM() macro.
Some enums were not being converted. This was caused by an optization that
had a bug in it.
All calls get checked against this enum map to see if it should be converted
or not, and it compares the call's system to the system that the enum map
was created under. If they match, then they call is processed.
To cut down on the number of iterations needed to find the maps with a
matching system, since calls and maps are grouped by system, when a match is
made, the index into the map array is saved, so that the next call, if it
belongs to the same system as the previous call, could start right at that
array index and not have to scan all the previous arrays.
The problem was, the saved index was used as the variable to know if this is
a call in a new system or not. If the index was zero, it was assumed that
the call is in a new system and would keep incrementing the saved index
until it found a matching system. The issue arises when the first matching
system was at index zero. The next map, if it belonged to the same system,
would then think it was the first match and increment the index to one. If
the next call belong to the same system, it would begin its search of the
maps off by one, and miss the first enum that should be converted. This left
a single enum not converted properly.
Also add a comment to describe exactly what that index was for. It took me a
bit too long to figure out what I was thinking when debugging this issue.
Link: http://lkml.kernel.org/r/717BE572-2070-4C1E-9902-9F2E0FEDA4F8@oracle.com
Cc: stable@vger.kernel.org
Fixes: 0c564a538aa93 ("tracing: Add TRACE_DEFINE_ENUM() macro to map enums to their values")
Reported-by: Chuck Lever <chuck.lever@oracle.com>
Teste-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
A cleanup of the PM code left an incorrect #ifdef in place, leading
to a harmless build warning:
drivers/net/ethernet/intel/fm10k/fm10k_pci.c:2502:12: error: 'fm10k_suspend' defined but not used [-Werror=unused-function]
drivers/net/ethernet/intel/fm10k/fm10k_pci.c:2475:12: error: 'fm10k_resume' defined but not used [-Werror=unused-function]
It's easier to use __maybe_unused attributes here, since you
can't pick the wrong one.
Fixes: 8249c47c6ba4 ("fm10k: use generic PM hooks instead of legacy PCIe power hooks")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In bringing back the context checks, the code checks first if its normal
(non-interrupt) context, and then for NMI then IRQ then softirq. The final
check is redundant. Since the if branch is only hit if the context is one of
NMI, IRQ, or SOFTIRQ, if it's not NMI or IRQ there's no reason to check if
it is SOFTIRQ. The current code returns the same result even if its not a
SOFTIRQ. Which is confusing.
pc & SOFTIRQ_OFFSET ? 2 : RB_CTX_SOFTIRQ
Is redundant as RB_CTX_SOFTIRQ *is* 2!
Fixes: a0e3a18f4baf ("ring-buffer: Bring back context level recursive checks")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
I've been taking on some co-maintainer duties already, so lets make it
official in the MAINTAINERS file.
Link: https://lkml.kernel.org/r/33db77a2-32e4-6b2c-d463-9d116ba55623@imgtec.com
Link: https://lkml.kernel.org/r/20171207110549.GM27409@jhogan-linux.mipstec.com
Signed-off-by: James Hogan <jhogan@kernel.org>
Acked-by: Paul Burton <paul.burton@mips.com>
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: David Daney <david.daney@cavium.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Matt Redfearn <matt.redfearn@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: John Crispin <john@phrozen.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18211/
|
|
Since commit d41e6858ba58 ("MIPS: Kconfig: Set default MIPS system type
as generic") switched the default platform to the "generic" platform,
allmodconfig has been failing with the following linker error (among
other errors):
arch/mips/kernel/vpe-mt.o In function `vpe_run':
(.text+0x59c): undefined reference to `physical_memsize'
The Lantiq platform already worked around the same issue in commit
9050d50e2244 ("MIPS: lantiq: Set physical_memsize") by declaring
physical_memsize with the initial value of 0 (on the assumption that the
actual memory size will be hard-coded in the loaded VPE firmware), and
the Malta platform already provided physical_memsize.
Since all other platforms will fail to link with the VPE loader enabled,
only allow Lantiq and Malta platforms to enable it, by way of a
SYS_SUPPORTS_VPE_LOADER which is selected by those two platforms and
which MIPS_VPE_LOADER depends on. SYS_SUPPORTS_MULTITHREADING is now a
dependency of SYS_SUPPORTS_VPE_LOADER so that Kconfig emits a warning if
SYS_SUPPORTS_VPE_LOADER is selected without SYS_SUPPORTS_MULTITHREADING.
Fixes: d41e6858ba58 ("MIPS: Kconfig: Set default MIPS system type as generic")
Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: John Crispin <john@phrozen.org>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-mips@linux-mips.org
Tested-by: Guenter Roeck <linux@roeck-us.net>
Patchwork: https://patchwork.linux-mips.org/patch/18453/
|
|
Fix two places where the structure isn't initialized to zero,
and thus can't be filled properly by the driver.
Fixes: 4a4b8169501b ("cfg80211: Accept multiple RSSI thresholds for CQM")
Fixes: 9930380f0bd8 ("cfg80211: implement IWRATE")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When saving BOs in the hang state we skip one entry of the
kernel_state->bo[] array, thus leaving it to NULL. This leads to a NULL
pointer dereference when, later in this function, we iterate over all
BOs to check their ->madv state.
Fixes: ca26d28bbaa3 ("drm/vc4: improve throughput by pipelining binning and rendering jobs")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180118145821.22344-1-boris.brezillon@free-electrons.com
|
|
If the frame samples from a render target that was just written, its
cache flush during the binning step may have occurred before the
previous frame's RCL was completed. Flush the texture caches again
before starting each RCL job to make sure that the sampling of the
previous RCL's output is correct.
Fixes flickering in the top left of 3DMMES Taiji.
Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes: ca26d28bbaa3 ("drm/vc4: improve throughput by pipelining binning and rendering jobs")
Link: https://patchwork.freedesktop.org/patch/msgid/20171221221722.23809-1-eric@anholt.net
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
|
|
Move up the extack reset/initialization in netlink_rcv_skb, so that
those 'goto ack' will not skip it. Otherwise, later on netlink_ack
may use the uninitialized extack and cause kernel crash.
Fixes: cbbdf8433a5f ("netlink: extack needs to be reset each time through loop")
Reported-by: syzbot+03bee3680a37466775e7@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
KASAN found a UAF due to dangling pointer. As the report below says,
rmi_f11_attention() accesses drvdata->attn_data.data, which was freed in
rmi_irq_fn.
[ 311.424062] BUG: KASAN: use-after-free in rmi_f11_attention+0x526/0x5e0 [rmi_core]
[ 311.424067] Read of size 27 at addr ffff88041fd610db by task irq/131-i2c_hid/1162
[ 311.424075] CPU: 0 PID: 1162 Comm: irq/131-i2c_hid Not tainted 4.15.0-rc8+ #2
[ 311.424076] Hardware name: Razer Blade Stealth/Razer, BIOS 6.05 01/26/2017
[ 311.424078] Call Trace:
[ 311.424086] dump_stack+0xae/0x12d
[ 311.424090] ? _atomic_dec_and_lock+0x103/0x103
[ 311.424094] ? show_regs_print_info+0xa/0xa
[ 311.424099] ? input_handle_event+0x10b/0x810
[ 311.424104] print_address_description+0x65/0x229
[ 311.424108] kasan_report.cold.5+0xa7/0x281
[ 311.424117] rmi_f11_attention+0x526/0x5e0 [rmi_core]
[ 311.424123] ? memcpy+0x1f/0x50
[ 311.424132] ? rmi_f11_attention+0x526/0x5e0 [rmi_core]
[ 311.424143] ? rmi_f11_probe+0x1e20/0x1e20 [rmi_core]
[ 311.424153] ? rmi_process_interrupt_requests+0x220/0x2a0 [rmi_core]
[ 311.424163] ? rmi_irq_fn+0x22c/0x270 [rmi_core]
[ 311.424173] ? rmi_process_interrupt_requests+0x2a0/0x2a0 [rmi_core]
[ 311.424177] ? free_irq+0xa0/0xa0
[ 311.424180] ? irq_finalize_oneshot.part.39+0xeb/0x180
[ 311.424190] ? rmi_process_interrupt_requests+0x2a0/0x2a0 [rmi_core]
[ 311.424193] ? irq_thread_fn+0x3d/0x80
[ 311.424197] ? irq_finalize_oneshot.part.39+0x180/0x180
[ 311.424200] ? irq_thread+0x21d/0x290
[ 311.424203] ? irq_thread_check_affinity+0x170/0x170
[ 311.424207] ? remove_wait_queue+0x150/0x150
[ 311.424212] ? kasan_unpoison_shadow+0x30/0x40
[ 311.424214] ? __init_waitqueue_head+0xa0/0xd0
[ 311.424218] ? task_non_contending.cold.55+0x18/0x18
[ 311.424221] ? irq_forced_thread_fn+0xa0/0xa0
[ 311.424226] ? irq_thread_check_affinity+0x170/0x170
[ 311.424230] ? kthread+0x19e/0x1c0
[ 311.424233] ? kthread_create_worker_on_cpu+0xc0/0xc0
[ 311.424237] ? ret_from_fork+0x32/0x40
[ 311.424244] Allocated by task 899:
[ 311.424249] kasan_kmalloc+0xbf/0xe0
[ 311.424252] __kmalloc_track_caller+0xd9/0x1f0
[ 311.424255] kmemdup+0x17/0x40
[ 311.424264] rmi_set_attn_data+0xa4/0x1b0 [rmi_core]
[ 311.424269] rmi_raw_event+0x10b/0x1f0 [hid_rmi]
[ 311.424278] hid_input_report+0x1a8/0x2c0 [hid]
[ 311.424283] i2c_hid_irq+0x146/0x1d0 [i2c_hid]
[ 311.424286] irq_thread_fn+0x3d/0x80
[ 311.424288] irq_thread+0x21d/0x290
[ 311.424291] kthread+0x19e/0x1c0
[ 311.424293] ret_from_fork+0x32/0x40
[ 311.424296] Freed by task 1162:
[ 311.424300] kasan_slab_free+0x71/0xc0
[ 311.424303] kfree+0x90/0x190
[ 311.424311] rmi_irq_fn+0x1b2/0x270 [rmi_core]
[ 311.424319] rmi_irq_fn+0x257/0x270 [rmi_core]
[ 311.424322] irq_thread_fn+0x3d/0x80
[ 311.424324] irq_thread+0x21d/0x290
[ 311.424327] kthread+0x19e/0x1c0
[ 311.424330] ret_from_fork+0x32/0x40
[ 311.424334] The buggy address belongs to the object at ffff88041fd610c0 which belongs to the cache kmalloc-64 of size 64
[ 311.424340] The buggy address is located 27 bytes inside of 64-byte region [ffff88041fd610c0, ffff88041fd61100)
[ 311.424344] The buggy address belongs to the page:
[ 311.424348] page:ffffea00107f5840 count:1 mapcount:0 mapping: (null) index:0x0
[ 311.424353] flags: 0x17ffffc0000100(slab)
[ 311.424358] raw: 0017ffffc0000100 0000000000000000 0000000000000000 00000001802a002a
[ 311.424363] raw: dead000000000100 dead000000000200 ffff8804228036c0 0000000000000000
[ 311.424366] page dumped because: kasan: bad access detected
[ 311.424369] Memory state around the buggy address:
[ 311.424373] ffff88041fd60f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 311.424377] ffff88041fd61000: fb fb fb fb fb fb fb fb fc fc fc fc fb fb fb fb
[ 311.424381] >ffff88041fd61080: fb fb fb fb fc fc fc fc fb fb fb fb fb fb fb fb
[ 311.424384] ^
[ 311.424387] ffff88041fd61100: fc fc fc fc fb fb fb fb fb fb fb fb fc fc fc fc
[ 311.424391] ffff88041fd61180: fb fb fb fb fb fb fb fb fc fc fc fc fb fb fb fb
Cc: stable@vger.kernel.org
Signed-off-by: Nick Desaulniers <nick.desaulniers@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Some issues have been reported with the for loop in stop_this_cpu() that
issues the 'wbinvd; hlt' sequence. Reverting this sequence to halt()
has been shown to resolve the issue.
However, the wbinvd is needed when running with SME. The reason for the
wbinvd is to prevent cache flush races between encrypted and non-encrypted
entries that have the same physical address. This can occur when
kexec'ing from memory encryption active to inactive or vice-versa. The
important thing is to not have outside of kernel text memory references
(such as stack usage), so the usage of the native_*() functions is needed
since these expand as inline asm sequences. So instead of reverting the
change, rework the sequence.
Move the wbinvd instruction outside of the for loop as native_wbinvd()
and make its execution conditional on X86_FEATURE_SME. In the for loop,
change the asm 'wbinvd; hlt' sequence back to a halt sequence but use
the native_halt() call.
Fixes: bba4ed011a52 ("x86/mm, kexec: Allow kexec to be used with SME")
Reported-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Dave Young <dyoung@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Yu Chen <yu.c.chen@intel.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: kexec@lists.infradead.org
Cc: ebiederm@redhat.com
Cc: Borislav Petkov <bp@alien8.de>
Cc: Rui Zhang <rui.zhang@intel.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180117234141.21184.44067.stgit@tlendack-t1.amdoffice.net
|
|
Keith reported an issue with vector space exhaustion on a server machine
which is caused by the i40e driver allocating 168 MSI interrupts when the
driver is initialized, even when most of these interrupts are not used at
all.
The x86 vector allocation code tries to avoid the immediate allocation with
the reservation mode, but the card uses MSI and does not support MSI entry
masking, which prevents reservation mode and requires immediate vector
allocation.
The matrix allocator is a bit naive and prefers the first CPU in the
cpumask which describes the possible target CPUs for an allocation. That
results in allocating all 168 vectors on CPU0 which later causes vector
space exhaustion when the NVMe driver tries to allocate managed interrupts
on each CPU for the per CPU queues.
Avoid this by finding the CPU which has the lowest vector allocation count
to spread out the non managed interrupt accross the possible target CPUs.
Fixes: 2f75d9e1c905 ("genirq: Implement bitmap matrix allocator")
Reported-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Keith Busch <keith.busch@intel.com>
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801171557330.1777@nanos
|
|
Current code configures the hardware with a new SA before the state has been
fully initialized. During this time interval, an incoming ESP packet can cause
a crash due to a NULL dereference. More specifically, xfrm_input() considers
the packet as valid, and yet, anti-replay mechanism is not initialized.
Move hardware configuration to the end of xfrm_state_construct(), and mark
the state as valid once the SA is fully initialized.
Fixes: d77e38e612a0 ("xfrm: Add an IPsec hardware offloading API")
Signed-off-by: Aviad Yehezkel <aviadye@mellnaox.com>
Signed-off-by: Aviv Heller <avivh@mellanox.com>
Signed-off-by: Yossi Kuperman <yossiku@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
If an invalid CANFD frame is received, from a driver or from a tun
interface, a Kernel warning is generated.
This patch replaces the WARN_ONCE by a simple pr_warn_once, so that a
kernel, bootet with panic_on_warn, does not panic. A printk seems to be
more appropriate here.
Reported-by: syzbot+e3b775f40babeff6e68b@syzkaller.appspotmail.com
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|