aboutsummaryrefslogtreecommitdiffstats
path: root/firmware (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2017-02-17dpaa_eth: small leak on errorDan Carpenter1-1/+1
This should be >= instead of > here. It means that we don't increment the free count enough so it becomes off by one. Fixes: 9ad1a3749333 ("dpaa_eth: add support for DPAA Ethernet") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17packet: Do not call fanout_release from atomic contextsAnoob Soman1-9/+22
Commit 6664498280cf ("packet: call fanout_release, while UNREGISTERING a netdev"), unfortunately, introduced the following issues. 1. calling mutex_lock(&fanout_mutex) (fanout_release()) from inside rcu_read-side critical section. rcu_read_lock disables preemption, most often, which prohibits calling sleeping functions. [ ] include/linux/rcupdate.h:560 Illegal context switch in RCU read-side critical section! [ ] [ ] rcu_scheduler_active = 1, debug_locks = 0 [ ] 4 locks held by ovs-vswitchd/1969: [ ] #0: (cb_lock){++++++}, at: [<ffffffff8158a6c9>] genl_rcv+0x19/0x40 [ ] #1: (ovs_mutex){+.+.+.}, at: [<ffffffffa04878ca>] ovs_vport_cmd_del+0x4a/0x100 [openvswitch] [ ] #2: (rtnl_mutex){+.+.+.}, at: [<ffffffff81564157>] rtnl_lock+0x17/0x20 [ ] #3: (rcu_read_lock){......}, at: [<ffffffff81614165>] packet_notifier+0x5/0x3f0 [ ] [ ] Call Trace: [ ] [<ffffffff813770c1>] dump_stack+0x85/0xc4 [ ] [<ffffffff810c9077>] lockdep_rcu_suspicious+0x107/0x110 [ ] [<ffffffff810a2da7>] ___might_sleep+0x57/0x210 [ ] [<ffffffff810a2fd0>] __might_sleep+0x70/0x90 [ ] [<ffffffff8162e80c>] mutex_lock_nested+0x3c/0x3a0 [ ] [<ffffffff810de93f>] ? vprintk_default+0x1f/0x30 [ ] [<ffffffff81186e88>] ? printk+0x4d/0x4f [ ] [<ffffffff816106dd>] fanout_release+0x1d/0xe0 [ ] [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0 2. calling mutex_lock(&fanout_mutex) inside spin_lock(&po->bind_lock). "sleeping function called from invalid context" [ ] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620 [ ] in_atomic(): 1, irqs_disabled(): 0, pid: 1969, name: ovs-vswitchd [ ] INFO: lockdep is turned off. [ ] Call Trace: [ ] [<ffffffff813770c1>] dump_stack+0x85/0xc4 [ ] [<ffffffff810a2f52>] ___might_sleep+0x202/0x210 [ ] [<ffffffff810a2fd0>] __might_sleep+0x70/0x90 [ ] [<ffffffff8162e80c>] mutex_lock_nested+0x3c/0x3a0 [ ] [<ffffffff816106dd>] fanout_release+0x1d/0xe0 [ ] [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0 3. calling dev_remove_pack(&fanout->prot_hook), from inside spin_lock(&po->bind_lock) or rcu_read-side critical-section. dev_remove_pack() -> synchronize_net(), which might sleep. [ ] BUG: scheduling while atomic: ovs-vswitchd/1969/0x00000002 [ ] INFO: lockdep is turned off. [ ] Call Trace: [ ] [<ffffffff813770c1>] dump_stack+0x85/0xc4 [ ] [<ffffffff81186274>] __schedule_bug+0x64/0x73 [ ] [<ffffffff8162b8cb>] __schedule+0x6b/0xd10 [ ] [<ffffffff8162c5db>] schedule+0x6b/0x80 [ ] [<ffffffff81630b1d>] schedule_timeout+0x38d/0x410 [ ] [<ffffffff810ea3fd>] synchronize_sched_expedited+0x53d/0x810 [ ] [<ffffffff810ea6de>] synchronize_rcu_expedited+0xe/0x10 [ ] [<ffffffff8154eab5>] synchronize_net+0x35/0x50 [ ] [<ffffffff8154eae3>] dev_remove_pack+0x13/0x20 [ ] [<ffffffff8161077e>] fanout_release+0xbe/0xe0 [ ] [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0 4. fanout_release() races with calls from different CPU. To fix the above problems, remove the call to fanout_release() under rcu_read_lock(). Instead, call __dev_remove_pack(&fanout->prot_hook) and netdev_run_todo will be happy that &dev->ptype_specific list is empty. In order to achieve this, I moved dev_{add,remove}_pack() out of fanout_{add,release} to __fanout_{link,unlink}. So, call to {,__}unregister_prot_hook() will make sure fanout->prot_hook is removed as well. Fixes: 6664498280cf ("packet: call fanout_release, while UNREGISTERING a netdev") Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Anoob Soman <anoob.soman@citrix.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-16vfs: fix uninitialized flags in splice_to_pipe()Miklos Szeredi1-0/+1
Flags (PIPE_BUF_FLAG_PACKET, PIPE_BUF_FLAG_GIFT) could remain on the unused part of the pipe ring buffer. Previously splice_to_pipe() left the flags value alone, which could result in incorrect behavior. Uninitialized flags appears to have been there from the introduction of the splice syscall. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Cc: <stable@vger.kernel.org> # 2.6.17+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-16fuse: fix uninitialized flags in pipe_bufferMiklos Szeredi1-0/+1
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Fixes: d82718e348fe ("fuse_dev_splice_read(): switch to add_to_pipe()") Cc: <stable@vger.kernel.org> # 4.9+
2017-02-15rhashtable: Revert nested table changes.David S. Miller5-316/+94
This reverts commits: 6a25478077d987edc5e2f880590a2bc5fcab4441 9dbbfb0ab6680c6a85609041011484e6658e7d3c 40137906c5f55c252194ef5834130383e639536f It's too risky to put in this late in the release cycle. We'll put these changes into the next merge window instead. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15ibmvnic: Fix endian errors in error reporting outputThomas Falcon1-4/+4
Error reports received from firmware were not being converted from big endian values, leading to bogus error codes reported on little endian systems. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15ibmvnic: Fix endian error when requesting device capabilitiesThomas Falcon1-2/+2
When a vNIC client driver requests a faulty device setting, the server returns an acceptable value for the client to request. This 64 bit value was incorrectly being swapped as a 32 bit value, resulting in loss of data. This patch corrects that by using the 64 bit swap function. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15net: neigh: Fix netevent NETEVENT_DELAY_PROBE_TIME_UPDATE notificationMarcus Huewe1-1/+2
When setting a neigh related sysctl parameter, we always send a NETEVENT_DELAY_PROBE_TIME_UPDATE netevent. For instance, when executing sysctl net.ipv6.neigh.wlp3s0.retrans_time_ms=2000 a NETEVENT_DELAY_PROBE_TIME_UPDATE netevent is generated. This is caused by commit 2a4501ae18b5 ("neigh: Send a notification when DELAY_PROBE_TIME changes"). According to the commit's description, it was intended to generate such an event when setting the "delay_first_probe_time" sysctl parameter. In order to fix this, only generate this event when actually setting the "delay_first_probe_time" sysctl parameter. This fix should not have any unintended side-effects, because all but one registered netevent callbacks check for other netevent event types (the registered callbacks were obtained by grepping for "register_netevent_notifier"). The only callback that uses the NETEVENT_DELAY_PROBE_TIME_UPDATE event is mlxsw_sp_router_netevent_event() (in drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c): in case of this event, it only accesses the DELAY_PROBE_TIME of the passed neigh_parms. Fixes: 2a4501ae18b5 ("neigh: Send a notification when DELAY_PROBE_TIME changes") Signed-off-by: Marcus Huewe <suse-tux@gmx.de> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15net: xilinx_emaclite: fix freezes due to unordered I/OAnssi Hannula1-54/+62
The xilinx_emaclite uses __raw_writel and __raw_readl for register accesses. Those functions do not imply any kind of memory barriers and they may be reordered. The driver does not seem to take that into account, though, and the driver does not satisfy the ordering requirements of the hardware. For clear examples, see xemaclite_mdio_write() and xemaclite_mdio_read() which try to set MDIO address before initiating the transaction. I'm seeing system freezes with the driver with GCC 5.4 and current Linux kernels on Zynq-7000 SoC immediately when trying to use the interface. In commit 123c1407af87 ("net: emaclite: Do not use microblaze and ppc IO functions") the driver was switched from non-generic in_be32/out_be32 (memory barriers, big endian) to __raw_readl/__raw_writel (no memory barriers, native endian), so apparently the device follows system endianness and the driver was originally written with the assumption of memory barriers. Rather than try to hunt for each case of missing barrier, just switch the driver to use iowrite32/ioread32/iowrite32be/ioread32be depending on endianness instead. Tested on little-endian Zynq-7000 ARM SoC FPGA. Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Fixes: 123c1407af87 ("net: emaclite: Do not use microblaze and ppc IO functions") Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15net: xilinx_emaclite: fix receive buffer overflowAnssi Hannula1-3/+7
xilinx_emaclite looks at the received data to try to determine the Ethernet packet length but does not properly clamp it if proto_type == ETH_P_IP or 1500 < proto_type <= 1518, causing a buffer overflow and a panic via skb_panic() as the length exceeds the allocated skb size. Fix those cases. Also add an additional unconditional check with WARN_ON() at the end. Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Fixes: bb81b2ddfa19 ("net: add Xilinx emac lite device driver") Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15PCI/PME: Restore pcie_pme_driver.removeYinghai Lu1-0/+12
In addition to making PME non-modular, d7def2040077 ("PCI/PME: Make explicitly non-modular") removed the pcie_pme_driver .remove() method, pcie_pme_remove(). pcie_pme_remove() freed the PME IRQ that was requested in pci_pme_probe(). The fact that we don't free the IRQ after d7def2040077 causes the following crash when removing a PCIe port device via /sys: ------------[ cut here ]------------ kernel BUG at drivers/pci/msi.c:370! invalid opcode: 0000 [#1] SMP Modules linked in: CPU: 1 PID: 14509 Comm: sh Tainted: G W 4.8.0-rc1-yh-00012-gd29438d RIP: 0010:[<ffffffff9758bbf5>] free_msi_irqs+0x65/0x190 ... Call Trace: [<ffffffff9758cda4>] pci_disable_msi+0x34/0x40 [<ffffffff97583817>] cleanup_service_irqs+0x27/0x30 [<ffffffff97583e9a>] pcie_port_device_remove+0x2a/0x40 [<ffffffff97584250>] pcie_portdrv_remove+0x40/0x50 [<ffffffff97576d7b>] pci_device_remove+0x4b/0xc0 [<ffffffff9785ebe6>] __device_release_driver+0xb6/0x150 [<ffffffff9785eca5>] device_release_driver+0x25/0x40 [<ffffffff975702e4>] pci_stop_bus_device+0x74/0xa0 [<ffffffff975704ea>] pci_stop_and_remove_bus_device_locked+0x1a/0x30 [<ffffffff97578810>] remove_store+0x50/0x70 [<ffffffff9785a378>] dev_attr_store+0x18/0x30 [<ffffffff97260b64>] sysfs_kf_write+0x44/0x60 [<ffffffff9725feae>] kernfs_fop_write+0x10e/0x190 [<ffffffff971e13f8>] __vfs_write+0x28/0x110 [<ffffffff970b0fa4>] ? percpu_down_read+0x44/0x80 [<ffffffff971e53a7>] ? __sb_start_write+0xa7/0xe0 [<ffffffff971e53a7>] ? __sb_start_write+0xa7/0xe0 [<ffffffff971e1f04>] vfs_write+0xc4/0x180 [<ffffffff971e3089>] SyS_write+0x49/0xa0 [<ffffffff97001a46>] do_syscall_64+0xa6/0x1b0 [<ffffffff9819201e>] entry_SYSCALL64_slow_path+0x25/0x25 ... RIP [<ffffffff9758bbf5>] free_msi_irqs+0x65/0x190 RSP <ffff89ad3085bc48> ---[ end trace f4505e1dac5b95d3 ]--- Segmentation fault Restore pcie_pme_remove(). [bhelgaas: changelog] Fixes: d7def2040077 ("PCI/PME: Make explicitly non-modular") Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> CC: stable@vger.kernel.org # v4.9+
2017-02-15fuse: fix use after free issue in fuse_dev_do_read()Sahitya Tummala1-0/+4
There is a potential race between fuse_dev_do_write() and request_wait_answer() contexts as shown below: TASK 1: __fuse_request_send(): |--spin_lock(&fiq->waitq.lock); |--queue_request(); |--spin_unlock(&fiq->waitq.lock); |--request_wait_answer(): |--if (test_bit(FR_SENT, &req->flags)) <gets pre-empted after it is validated true> TASK 2: fuse_dev_do_write(): |--clears bit FR_SENT, |--request_end(): |--sets bit FR_FINISHED |--spin_lock(&fiq->waitq.lock); |--list_del_init(&req->intr_entry); |--spin_unlock(&fiq->waitq.lock); |--fuse_put_request(); |--queue_interrupt(); <request gets queued to interrupts list> |--wake_up_locked(&fiq->waitq); |--wait_event_freezable(); <as FR_FINISHED is set, it returns and then the caller frees this request> Now, the next fuse_dev_do_read(), see interrupts list is not empty and then calls fuse_read_interrupt() which tries to access the request which is already free'd and gets the below crash: [11432.401266] Unable to handle kernel paging request at virtual address 6b6b6b6b6b6b6b6b ... [11432.418518] Kernel BUG at ffffff80083720e0 [11432.456168] PC is at __list_del_entry+0x6c/0xc4 [11432.463573] LR is at fuse_dev_do_read+0x1ac/0x474 ... [11432.679999] [<ffffff80083720e0>] __list_del_entry+0x6c/0xc4 [11432.687794] [<ffffff80082c65e0>] fuse_dev_do_read+0x1ac/0x474 [11432.693180] [<ffffff80082c6b14>] fuse_dev_read+0x6c/0x78 [11432.699082] [<ffffff80081d5638>] __vfs_read+0xc0/0xe8 [11432.704459] [<ffffff80081d5efc>] vfs_read+0x90/0x108 [11432.709406] [<ffffff80081d67f0>] SyS_read+0x58/0x94 As FR_FINISHED bit is set before deleting the intr_entry with input queue lock in request completion path, do the testing of this flag and queueing atomically with the same lock in queue_interrupt(). Signed-off-by: Sahitya Tummala <stummala@codeaurora.org> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Fixes: fd22d62ed0c3 ("fuse: no fc->lock for iqueue parts") Cc: <stable@vger.kernel.org> # 4.2+
2017-02-14bpf: kernel header files need to be copied into the tools directoryStephen Rothwell1-0/+7
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14tcp: tcp_probe: use spin_lock_bh()Eric Dumazet1-2/+2
tcp_rcv_established() can now run in process context. We need to disable BH while acquiring tcp probe spinlock, or risk a deadlock. Fixes: 5413d1babe8f ("net: do not block BH while processing socket backlog") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Ricardo Nabinger Sanchez <rnsanchez@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14uapi: fix linux/if_pppol2tp.h userspace compilation errorsDmitry V. Levin1-4/+3
Because of <linux/libc-compat.h> interface limitations, <netinet/in.h> provided by libc cannot be included after <linux/in.h>, therefore any header that includes <netinet/in.h> cannot be included after <linux/in.h>. Change uapi/linux/l2tp.h, the last uapi header that includes <netinet/in.h>, to include <linux/in.h> and <linux/in6.h> instead of <netinet/in.h> and use __SOCK_SIZE__ instead of sizeof(struct sockaddr) the same way as uapi/linux/in.h does, to fix linux/if_pppol2tp.h userspace compilation errors like this: In file included from /usr/include/linux/l2tp.h:12:0, from /usr/include/linux/if_pppol2tp.h:21, /usr/include/netinet/in.h:31:8: error: redefinition of 'struct in_addr' Fixes: 47c3e7783be4 ("net: l2tp: deprecate PPPOL2TP_MSG_* in favour of L2TP_MSG_*") Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14[media] siano: make it work again with CONFIG_VMAP_STACKMauro Carvalho Chehab1-5/+13
Reported as a Kaffeine bug: https://bugs.kde.org/show_bug.cgi?id=375811 The USB control messages require DMA to work. We cannot pass a stack-allocated buffer, as it is not warranted that the stack would be into a DMA enabled area. On Kernel 4.9, the default is to not accept DMA on stack anymore on x86 architecture. On other architectures, this has been a requirement since Kernel 2.2. So, after this patch, this driver should likely work fine on all archs. Tested with USB ID 2040:5510: Hauppauge Windham Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-02-14packet: fix races in fanout_add()Eric Dumazet1-25/+30
Multiple threads can call fanout_add() at the same time. We need to grab fanout_mutex earlier to avoid races that could lead to one thread freeing po->rollover that was set by another thread. Do the same in fanout_release(), for peace of mind, and to help us finding lockdep issues earlier. Fixes: dc99f600698d ("packet: Add fanout support.") Fixes: 0648ab70afe6 ("packet: rollover prepare: per-socket state") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14ibmvnic: Fix initial MTU settingsThomas Falcon1-7/+5
In the current driver, the MTU is set to the maximum value capable for the backing device. This decision turned out to be a mistake as it led to confusion among users. The expected initial MTU value used for other IBM vNIC capable operating systems is 1500, with the maximum value (9000) reserved for when Jumbo frames are enabled. This patch sets the MTU to the default value for a net device. It also corrects a discrepancy between MTU values received from firmware, which includes the ethernet header length, and net device MTU values. Finally, it removes redundant min/max MTU assignments after device initialization. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14net: ethernet: ti: cpsw: fix cpsw assignment in resumeIvan Khoronzhuk1-1/+1
There is a copy-paste error, which hides breaking of resume for CPSW driver: there was replaced netdev_priv() to ndev_to_cpsw(ndev) in suspend, but left it unchanged in resume. Fixes: 606f39939595a4d4540406bfc11f265b2036af6d (ti: cpsw: move platform data and slaves info to cpsw_common) Reported-by: Alexey Starikovskiy <AStarikovskiy@topcon.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14kcm: fix a null pointer dereference in kcm_sendmsg()WANG Cong1-2/+4
In commit 98e3862ca2b1 ("kcm: fix 0-length case for kcm_sendmsg()") I tried to avoid skb allocation for 0-length case, but missed a check for NULL pointer in the non EOR case. Fixes: 98e3862ca2b1 ("kcm: fix 0-length case for kcm_sendmsg()") Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: Tom Herbert <tom@herbertland.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14net: fec: fix multicast filtering hardware setupRui Sousa1-14/+9
Fix hardware setup of multicast address hash: - Never clear the hardware hash (to avoid packet loss) - Construct the hash register values in software and then write once to hardware Signed-off-by: Rui Sousa <rui.sousa@nxp.com> Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14ipv6: Handle IPv4-mapped src to in6addr_any dst.Jonathan T. Leighton3-8/+21
This patch adds a check on the type of the source address for the case where the destination address is in6addr_any. If the source is an IPv4-mapped IPv6 source address, the destination is changed to ::ffff:127.0.0.1, and otherwise the destination is changed to ::1. This is done in three locations to handle UDP calls to either connect() or sendmsg() and TCP calls to connect(). Note that udpv6_sendmsg() delays handling an in6addr_any destination until very late, so the patch only needs to handle the case where the source is an IPv4-mapped IPv6 address. Signed-off-by: Jonathan T. Leighton <jtleight@udel.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14ipv6: Inhibit IPv4-mapped src address on the wire.Jonathan T. Leighton1-0/+3
This patch adds a check for the problematic case of an IPv4-mapped IPv6 source address and a destination address that is neither an IPv4-mapped IPv6 address nor in6addr_any, and returns an appropriate error. The check in done before returning from looking up the route. Signed-off-by: Jonathan T. Leighton <jtleight@udel.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14net/mlx5e: Disable preemption when doing TC statistics upcallOr Gerlitz1-0/+4
When called by HW offloading drivers, the TC action (e.g net/sched/act_mirred.c) code uses this_cpu logic, e.g _bstats_cpu_update(this_cpu_ptr(a->cpu_bstats), bytes, packets) per the kernel documention, preemption should be disabled, add that. Before the fix, when running with CONFIG_PREEMPT set, we get a BUG: using smp_processor_id() in preemptible [00000000] code: tc/3793 asserion from the TC action (mirred) stats_update callback. Fixes: aad7e08d39bd ('net/mlx5e: Hardware offloaded flower filter statistics support') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-13rhashtable: Add nested tablesHerbert Xu2-72/+276
This patch adds code that handles GFP_ATOMIC kmalloc failure on insertion. As we cannot use vmalloc, we solve it by making our hash table nested. That is, we allocate single pages at each level and reach our desired table size by nesting them. When a nested table is created, only a single page is allocated at the top-level. Lower levels are allocated on demand during insertion. Therefore for each insertion to succeed, only two (non-consecutive) pages are needed. After a nested table is created, a rehash will be scheduled in order to switch to a vmalloced table as soon as possible. Also, the rehash code will never rehash into a nested table. If we detect a nested table during a rehash, the rehash will be aborted and a new rehash will be scheduled. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-13tipc: Fix tipc_sk_reinit race conditionsHerbert Xu2-11/+23
There are two problems with the function tipc_sk_reinit. Firstly it's doing a manual walk over an rhashtable. This is broken as an rhashtable can be resized and if you manually walk over it during a resize then you may miss entries. Secondly it's missing memory barriers as previously the code used spinlocks which provide the barriers implicitly. This patch fixes both problems. Fixes: 07f6c4bc048a ("tipc: convert tipc reference table to...") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-13gfs2: Use rhashtable walk interface in glock_hash_walkHerbert Xu1-11/+17
The function glock_hash_walk walks the rhashtable by hand. This is broken because if it catches the hash table in the middle of a rehash, then it will miss entries. This patch replaces the manual walk by using the rhashtable walk interface. Fixes: 88ffbf3e037e ("GFS2: Use resizable hash table for glocks") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-13NET: Fix /proc/net/arp for AX.25Ralf Baechle1-6/+6
When sending ARP requests over AX.25 links the hwaddress in the neighbour cache are not getting initialized. For such an incomplete arp entry ax2asc2 will generate an empty string resulting in /proc/net/arp output like the following: $ cat /proc/net/arp IP address HW type Flags HW address Mask Device 192.168.122.1 0x1 0x2 52:54:00:00:5d:5f * ens3 172.20.1.99 0x3 0x0 * bpq0 The missing field will confuse the procfs parsing of arp(8) resulting in incorrect output for the device such as the following: $ arp Address HWtype HWaddress Flags Mask Iface gateway ether 52:54:00:00:5d:5f C ens3 172.20.1.99 (incomplete) ens3 This changes the content of /proc/net/arp to: $ cat /proc/net/arp IP address HW type Flags HW address Mask Device 172.20.1.99 0x3 0x0 * * bpq0 192.168.122.1 0x1 0x2 52:54:00:00:5d:5f * ens3 To do so it change ax2asc to put the string "*" in buf for a NULL address argument. Finally the HW address field is left aligned in a 17 character field (the length of an ethernet HW address in the usual hex notation) for readability. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-13xen-netback: vif counters from int/long to u64Mart van Santen2-8/+8
This patch fixes an issue where the type of counters in the queue(s) and interface are not in sync (queue counters are int, interface counters are long), causing incorrect reporting of tx/rx values of the vif interface and unclear counter overflows. This patch sets both counters to the u64 type. Signed-off-by: Mart van Santen <mart@greenhost.nl> Reviewed-by: Paul Durrant <paul.durrant@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-13MAINTAINERS: Remove old e-mail addressArnaldo Carvalho de Melo2-12/+8
The ghostprotocols.net domain is not working, remove it from CREDITS and MAINTAINERS, and change the status to "Odd fixes", and since I haven't been maintaining those, remove my address from there. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-13[media] cec: initiator should be the same as the destination for, pollHans Verkuil1-4/+3
Poll messages that are used to allocate a logical address should use the same initiator as the destination. Instead, it expected that the initiator was 0xf which is not according to the standard. This also had consequences for the message checks in cec_transmit_msg_fh that incorrectly rejected poll messages with the same initiator and destination. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-02-13[media] videodev2.h: go back to limited range Y'CbCr for SRGB and, ADOBERGBHans Verkuil2-10/+20
This reverts 'commit 7e0739cd9c40 ("[media] videodev2.h: fix sYCC/AdobeYCC default quantization range"). The problem is that many drivers can convert R'G'B' content (often from sensors) to Y'CbCr, but they all produce limited range Y'CbCr. To stay backwards compatible the default quantization range for sRGB and AdobeRGB Y'CbCr encoding should be limited range, not full range, even though the corresponding standards specify full range. Update the V4L2_MAP_QUANTIZATION_DEFAULT define accordingly and also update the documentation. Fixes: 7e0739cd9c40 ("[media] videodev2.h: fix sYCC/AdobeYCC default quantization range") Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: <stable@vger.kernel.org> # for v4.9 and up Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-02-12net/llc: avoid BUG_ON() in skb_orphan()Eric Dumazet2-0/+6
It seems nobody used LLC since linux-3.12. Fortunately fuzzers like syzkaller still know how to run this code, otherwise it would be no fun. Setting skb->sk without skb->destructor leads to all kinds of bugs, we now prefer to be very strict about it. Ideally here we would use skb_set_owner() but this helper does not exist yet, only CAN seems to have a private helper for that. Fixes: 376c7311bdb6 ("net: add a temporary sanity check in skb_orphan()") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-12bpf: introduce BPF_F_ALLOW_OVERRIDE flagAlexei Starovoitov11-38/+151
If BPF_F_ALLOW_OVERRIDE flag is used in BPF_PROG_ATTACH command to the given cgroup the descendent cgroup will be able to override effective bpf program that was inherited from this cgroup. By default it's not passed, therefore override is disallowed. Examples: 1. prog X attached to /A with default prog Y fails to attach to /A/B and /A/B/C Everything under /A runs prog X 2. prog X attached to /A with allow_override. prog Y fails to attach to /A/B with default (non-override) prog M attached to /A/B with allow_override. Everything under /A/B runs prog M only. 3. prog X attached to /A with allow_override. prog Y fails to attach to /A with default. The user has to detach first to switch the mode. In the future this behavior may be extended with a chain of non-overridable programs. Also fix the bug where detach from cgroup where nothing is attached was not throwing error. Return ENOENT in such case. Add several testcases and adjust libbpf. Fixes: 3007098494be ("cgroup: add support for eBPF programs") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Daniel Mack <daniel@zonque.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-12Linux 4.10-rc8Linus Torvalds1-1/+1
2017-02-11ibmvnic: Call napi_disable instead of napi_enable in failure pathNathan Fontenot1-1/+1
The failure path in ibmvnic_open() mistakenly makes a second call to napi_enable instead of calling napi_disable. This can result in a BUG_ON for any queues that were enabled in the previous call to napi_enable. Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-11ibmvnic: Initialize completion variables before starting workNathan Fontenot1-8/+9
Initialize condition variables prior to invoking any work that can mark them complete. This resolves a race in the ibmvnic driver where the driver faults trying to complete an uninitialized condition variable. Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10Btrfs: fix btrfs_decompress_buf2page()Omar Sandoval1-15/+24
If btrfs_decompress_buf2page() is handed a bio with its page in the middle of the working buffer, then we adjust the offset into the working buffer. After we copy into the bio, we advance the iterator by the number of bytes we copied. Then, we have some logic to handle the case of discontiguous pages and adjust the offset into the working buffer again. However, if we didn't advance the bio to a new page, we may enter this case in error, essentially repeating the adjustment that we already made when we entered the function. The end result is bogus data in the bio. Previously, we only checked for this case when we advanced to a new page, but the conversion to bio iterators changed that. This restores the old, correct behavior. A case I saw when testing with zlib was: buf_start = 42769 total_out = 46865 working_bytes = total_out - buf_start = 4096 start_byte = 45056 The condition (total_out > start_byte && buf_start < start_byte) is true, so we adjust the offset: buf_offset = start_byte - buf_start = 2287 working_bytes -= buf_offset = 1809 current_buf_start = buf_start = 42769 Then, we copy bytes = min(bvec.bv_len, PAGE_SIZE - buf_offset, working_bytes) = 1809 buf_offset += bytes = 4096 working_bytes -= bytes = 0 current_buf_start += bytes = 44578 After bio_advance(), we are still in the same page, so start_byte is the same. Then, we check (total_out > start_byte && current_buf_start < start_byte), which is true! So, we adjust the values again: buf_offset = start_byte - buf_start = 2287 working_bytes = total_out - start_byte = 1809 current_buf_start = buf_start + buf_offset = 45056 But note that working_bytes was already zero before this, so we should have stopped copying. Fixes: 974b1adc3b10 ("btrfs: use bio iterators for the decompression handlers") Reported-by: Pat Erley <pat-lkml@erley.org> Reviewed-by: Chris Mason <clm@fb.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Chris Mason <clm@fb.com> Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Tested-by: Liu Bo <bo.li.liu@oracle.com>
2017-02-10l2tp: do not use udp_ioctl()Eric Dumazet3-2/+28
udp_ioctl(), as its name suggests, is used by UDP protocols, but is also used by L2TP :( L2TP should use its own handler, because it really does not look the same. SIOCINQ for instance should not assume UDP checksum or headers. Thanks to Andrey and syzkaller team for providing the report and a nice reproducer. While crashes only happen on recent kernels (after commit 7c13f97ffde6 ("udp: do fwd memory scheduling on dequeue")), this probably needs to be backported to older kernels. Fixes: 7c13f97ffde6 ("udp: do fwd memory scheduling on dequeue") Fixes: 85584672012e ("udp: Fix udp_poll() and ioctl()") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Andrey Konovalov <andreyknvl@google.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10xen-netfront: Delete rx_refill_timer in xennet_disconnect_backend()Boris Ostrovsky1-1/+2
rx_refill_timer should be deleted as soon as we disconnect from the backend since otherwise it is possible for the timer to go off before we get to xennet_destroy_queues(). If this happens we may dereference queue->rx.sring which is set to NULL in xennet_disconnect_backend(). Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> CC: stable@vger.kernel.org Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10NET: mkiss: Fix panicRalf Baechle1-2/+2
If a USB-to-serial adapter is unplugged, the driver re-initializes, with dev->hard_header_len and dev->addr_len set to zero, instead of the correct values. If then a packet is sent through the half-dead interface, the kernel will panic due to running out of headroom in the skb when pushing for the AX.25 headers resulting in this panic: [<c0595468>] (skb_panic) from [<c0401f70>] (skb_push+0x4c/0x50) [<c0401f70>] (skb_push) from [<bf0bdad4>] (ax25_hard_header+0x34/0xf4 [ax25]) [<bf0bdad4>] (ax25_hard_header [ax25]) from [<bf0d05d4>] (ax_header+0x38/0x40 [mkiss]) [<bf0d05d4>] (ax_header [mkiss]) from [<c041b584>] (neigh_compat_output+0x8c/0xd8) [<c041b584>] (neigh_compat_output) from [<c043e7a8>] (ip_finish_output+0x2a0/0x914) [<c043e7a8>] (ip_finish_output) from [<c043f948>] (ip_output+0xd8/0xf0) [<c043f948>] (ip_output) from [<c043f04c>] (ip_local_out_sk+0x44/0x48) This patch makes mkiss behave like the 6pack driver. 6pack does not panic. In 6pack.c sp_setup() (same function name here) the values for dev->hard_header_len and dev->addr_len are set to the same values as in my mkiss patch. [ralf@linux-mips.org: Massages original submission to conform to the usual standards for patch submissions.] Signed-off-by: Thomas Osterried <thomas@osterried.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10net: hns: Fix the device being used for dma mapping during TXKejian Yan1-1/+1
This patch fixes the device being used to DMA map skb->data. Erroneous device assignment causes the crash when SMMU is enabled. This happens during TX since buffer gets DMA mapped with device correspondign to net_device and gets unmapped using the device related to DSAF. Signed-off-by: Kejian Yan <yankejian@huawei.com> Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10x86/mm/ptdump: Fix soft lockup in page table walkerAndrey Ryabinin1-0/+2
CONFIG_KASAN=y needs a lot of virtual memory mapped for its shadow. In that case ptdump_walk_pgd_level_core() takes a lot of time to walk across all page tables and doing this without a rescheduling causes soft lockups: NMI watchdog: BUG: soft lockup - CPU#3 stuck for 23s! [swapper/0:1] ... Call Trace: ptdump_walk_pgd_level_core+0x40c/0x550 ptdump_walk_pgd_level_checkwx+0x17/0x20 mark_rodata_ro+0x13b/0x150 kernel_init+0x2f/0x120 ret_from_fork+0x2c/0x40 I guess that this issue might arise even without KASAN on huge machines with several terabytes of RAM. Stick cond_resched() in pgd loop to fix this. Reported-by: Tobias Regnery <tobias.regnery@gmail.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: kasan-dev@googlegroups.com Cc: Alexander Potapenko <glider@google.com> Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20170210095405.31802-1-aryabinin@virtuozzo.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-02-10x86/tsc: Make the TSC ADJUST sanitizing work for tsc_reliableThomas Gleixner1-9/+7
When the TSC is marked reliable then the synchronization check is skipped, but that also skips the TSC ADJUST sanitizing code. So on a machine with a wreckaged BIOS the TSC deviation between CPUs might go unnoticed. Let the TSC adjust sanitizing code run unconditionally and just skip the expensive synchronization checks when TSC is marked reliable. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Olof Johansson <olof@lixom.net> Link: http://lkml.kernel.org/r/20170209151231.491189912@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-02-10x86/tsc: Avoid the large time jump when sanitizing TSC ADJUSTThomas Gleixner1-2/+3
Olof reported that on a machine which has a BIOS wreckaged TSC the timestamps in dmesg are making a large jump because the TSC value is jumping forward after resetting the TSC ADJUST register to a sane value. This can be avoided by calling the TSC ADJUST saniziting function before initializing the per cpu sched clock machinery. That takes the offset into account and avoid the time jump. What cannot be avoided is that the 'Firmware Bug' warnings on the secondary CPUs are printed with the large time offsets because it would be too much effort and ugly hackery to print those warnings into a buffer and emit them after the adjustemt on the starting CPUs. It's a firmware bug and should be fixed in firmware. The weird timestamps are collateral damage and just illustrate the sillyness of the BIOS folks: [ 0.397445] smp: Bringing up secondary CPUs ... [ 0.402100] x86: Booting SMP configuration: [ 0.406343] .... node #0, CPUs: #1 [1265776479.930667] [Firmware Bug]: TSC ADJUST differs: Reference CPU0: -2978888639075328 CPU1: -2978888639183101 [1265776479.944664] TSC ADJUST synchronize: Reference CPU0: 0 CPU1: -2978888639183101 [ 0.508119] #2 [1265776480.032346] [Firmware Bug]: TSC ADJUST differs: Reference CPU0: -2978888639075328 CPU2: -2978888639183677 [1265776480.044192] TSC ADJUST synchronize: Reference CPU0: 0 CPU2: -2978888639183677 [ 0.607643] #3 [1265776480.131874] [Firmware Bug]: TSC ADJUST differs: Reference CPU0: -2978888639075328 CPU3: -2978888639184530 [1265776480.143720] TSC ADJUST synchronize: Reference CPU0: 0 CPU3: -2978888639184530 [ 0.707108] smp: Brought up 1 node, 4 CPUs [ 0.711271] smpboot: Total of 4 processors activated (21698.88 BogoMIPS) Reported-by: Olof Johansson <olof@lixom.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170209151231.411460506@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-02-10tick/nohz: Fix possible missing clock reprog after tick soft restartFrederic Weisbecker1-0/+5
ts->next_tick keeps track of the next tick deadline in order to optimize clock programmation on irq exit and avoid redundant clock device writes. Now if ts->next_tick missed an update, we may spuriously miss a clock reprog later as the nohz code is fooled by an obsolete next_tick value. This is what happens here on a specific path: when we observe an expired timer from the nohz update code on irq exit, we perform a soft tick restart which simply fires the closest possible tick without actually exiting the nohz mode and restoring a periodic state. But we forget to update ts->next_tick accordingly. As a result, after the next tick resulting from such soft tick restart, the nohz code sees a stale value on ts->next_tick which doesn't match the clock deadline that just expired. If that obsolete ts->next_tick value happens to collide with the actual next tick deadline to be scheduled, we may spuriously bypass the clock reprogramming. In the worst case, the tick may never fire again. Fix this with a ts->next_tick reset on soft tick restart. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Reviewed: Wanpeng Li <wanpeng.li@hotmail.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1486485894-29173-1-git-send-email-fweisbec@gmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-02-10perf/core: Fix crash in perf_event_read()Peter Zijlstra1-10/+15
Alexei had his box explode because doing read() on a package (rapl/uncore) event that isn't currently scheduled in ends up doing an out-of-bounds load. Rework the code to more explicitly deal with event->oncpu being -1. Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com> Tested-by: Alexei Starovoitov <ast@kernel.org> Tested-by: David Carrillo-Cisneros <davidcc@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: eranian@google.com Fixes: d6a2f9035bfc ("perf/core: Introduce PMU_EV_CAP_READ_ACTIVE_PKG") Link: http://lkml.kernel.org/r/20170131102710.GL6515@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-09nfsd: Revert "nfsd: special case truncates some more"J. Bruce Fields1-37/+60
This patch incorrectly attempted nested mnt_want_write, and incorrectly disabled nfsd's owner override for truncate. We'll fix those problems and make another attempt soon, for the moment I think the safest is to revert. Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2017-02-09scsi: zfcp: fix use-after-free by not tracing WKA port open/close on failed sendSteffen Maier1-4/+4
Dan Carpenter kindly reported: <quote> The patch d27a7cb91960: "zfcp: trace on request for open and close of WKA port" from Aug 10, 2016, leads to the following static checker warning: drivers/s390/scsi/zfcp_fsf.c:1615 zfcp_fsf_open_wka_port() warn: 'req' was already freed. drivers/s390/scsi/zfcp_fsf.c 1609 zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT); 1610 retval = zfcp_fsf_req_send(req); 1611 if (retval) 1612 zfcp_fsf_req_free(req); ^^^ Freed. 1613 out: 1614 spin_unlock_irq(&qdio->req_q_lock); 1615 if (req && !IS_ERR(req)) 1616 zfcp_dbf_rec_run_wka("fsowp_1", wka_port, req->req_id); ^^^^^^^^^^^ Use after free. 1617 return retval; 1618 } Same thing for zfcp_fsf_close_wka_port() as well. </quote> Rather than relying on req being NULL (or ERR_PTR) for all cases where we don't want to trace or should not trace, simply check retval which is unconditionally initialized with -EIO != 0 and it can only become 0 on successful retval = zfcp_fsf_req_send(req). With that we can also remove the then again unnecessary unconditional initialization of req which was introduced with that earlier commit. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Suggested-by: Benjamin Block <bblock@linux.vnet.ibm.com> Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Fixes: d27a7cb91960 ("zfcp: trace on request for open and close of WKA port") Cc: <stable@vger.kernel.org> #2.6.38+ Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com> Reviewed-by: Jens Remus <jremus@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-09scsi: aacraid: Fix INTx/MSI-x issue with older controllersDave Carroll1-2/+6
commit 78cbccd3bd68 ("aacraid: Fix for KDUMP driver hang") caused a problem on older controllers which do not support MSI-x (namely ASR3405,ASR3805). This patch conditionalizes the previous patch to controllers which support MSI-x Cc: <stable@vger.kernel.org> # v4.7+ Fixes: 78cbccd3bd68 ("aacraid: Fix for KDUMP driver hang") Reported-by: Arkadiusz Miskiewicz <a.miskiewicz@gmail.com> Signed-off-by: Dave Carroll <david.carroll@microsemi.com> Reviewed-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.