| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pass the server and volume break counts from before the status fetch
operation that queried the attributes of a file into afs_iget5_set() so
that the new vnode's break counters can be initialised appropriately.
This allows detection of a volume or server break that happened whilst we
were fetching the status or setting up the vnode.
Fixes: c435ee34551e ("afs: Overhaul the callback handling")
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Make use of the status update for the target file that the YFS.RemoveFile2
RPC op returns to correctly update the vnode as to whether the file was
actually deleted or just had nlink reduced.
Fixes: 30062bd13e36 ("afs: Implement YFS support in the fs client")
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Use RCU-based freeing for afs_cb_interest struct objects and use RCU on
vnode->cb_interest. Use that change to allow afs_check_validity() to use
read_seqbegin_or_lock() instead of read_seqlock_excl().
This also requires the caller of afs_check_validity() to hold the RCU read
lock across the call.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Split afs_validate() so that the part that decides if the vnode is still
valid can be used under LOOKUP_RCU conditions from afs_d_revalidate().
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Don't save callback version and type fields as the version is about the
format of the callback information and the type is relative to the
particular RPC call.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
When applying the status and callback in the response of an operation,
apply them in the same critical section so that there's no race between
checking the callback state and checking status-dependent state (such as
the data version).
Fix this by:
(1) Allocating a joint {status,callback} record (afs_status_cb) before
calling the RPC function for each vnode for which the RPC reply
contains a status or a status plus a callback. A flag is set in the
record to indicate if a callback was actually received.
(2) These records are passed into the RPC functions to be filled in. The
afs_decode_status() and yfs_decode_status() functions are removed and
the cb_lock is no longer taken.
(3) xdr_decode_AFSFetchStatus() and xdr_decode_YFSFetchStatus() no longer
update the vnode.
(4) xdr_decode_AFSCallBack() and xdr_decode_YFSCallBack() no longer update
the vnode.
(5) vnodes, expected data-version numbers and callback break counters
(cb_break) no longer need to be passed to the reply delivery
functions.
Note that, for the moment, the file locking functions still need
access to both the call and the vnode at the same time.
(6) afs_vnode_commit_status() is now given the cb_break value and the
expected data_version and the task of applying the status and the
callback to the vnode are now done here.
This is done under a single taking of vnode->cb_lock.
(7) afs_pages_written_back() is now called by afs_store_data() rather than
by the reply delivery function.
afs_pages_written_back() has been moved to before the call point and
is now given the first and last page numbers rather than a pointer to
the call.
(8) The indicator from YFS.RemoveFile2 as to whether the target file
actually got removed (status.abort_code == VNOVNODE) rather than
merely dropping a link is now checked in afs_unlink rather than in
xdr_decode_YFSFetchStatus().
Supplementary fixes:
(*) afs_cache_permit() now gets the caller_access mask from the
afs_status_cb object rather than picking it out of the vnode's status
record. afs_fetch_status() returns caller_access through its argument
list for this purpose also.
(*) afs_inode_init_from_status() now uses a write lock on cb_lock rather
than a read lock and now sets the callback inside the same critical
section.
Fixes: c435ee34551e ("afs: Overhaul the callback handling")
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Always ask for the reply time from AF_RXRPC as it's used to calculate the
callback expiry time and lock expiry times, so it's needed by most FS
operations.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
afs_do_lookup() will do an order-1 allocation to allocate status records if
there are more than 39 vnodes to stat.
Fix this by allocating an array of {status,callback} records for each vnode
we want to examine using vmalloc() if larger than a page.
This not only gets rid of the order-1 allocation, but makes it easier to
grow beyond 50 records for YFS servers. It also allows us to move to
{status,callback} tuples for other calls too and makes it easier to lock
across the application of the status and the callback to the vnode.
Fixes: 5cf9dd55a0ec ("afs: Prospectively look up extra files when doing a single lookup")
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Replace the afs_call::reply[] array with a bunch of typed members so that
the compiler can use type-checking on them. It's also easier for the eye
to see what's going on.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Make certain RPC operations non-interruptible, including:
(*) Set attributes
(*) Store data
We don't want to get interrupted during a flush on close, flush on
unlock, writeback or an inode update, leaving us in a state where we
still need to do the writeback or update.
(*) Extend lock
(*) Release lock
We don't want to get lock extension interrupted as the file locks on
the server are time-limited. Interruption during lock release is less
of an issue since the lock is time-limited, but it's better to
complete the release to avoid a several-minute wait to recover it.
*Setting* the lock isn't a problem if it's interrupted since we can
just return to the user and tell them they were interrupted - at
which point they can elect to retry.
(*) Silly unlink
We want to remove silly unlink files if we can, rather than leaving
them for the salvager to clear up.
Note that whilst these calls are no longer interruptible, they do have
timeouts on them, so if the server stops responding the call will fail with
something like ETIME or ECONNRESET.
Without this, the following:
kAFS: Unexpected error from FS.StoreData -512
appears in dmesg when a pending store data gets interrupted and some
processes may just hang.
Additionally, make the code that checks/updates the server record ignore
failure due to interruption if the main call is uninterruptible and if the
server has an address list. The next op will check it again since the
expiration time on the old list has past.
Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation")
Reported-by: Jonathan Billings <jsbillings@jsbillings.org>
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
If an older AFS server doesn't support an operation, it may accept the call
and then sit on it forever, happily responding to pings that make kafs
think that the call is still alive.
Fix this by setting the maximum lifespan of Volume Location service calls
in particular and probe calls in general so that they don't run on
endlessly if they're not supported.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Currently, once configured, AFS cells are looked up in the DNS at regular
intervals - which is a waste of resources if those cells aren't being
used. It also leads to a problem where cells preloaded, but not
configured, before the network is brought up end up effectively statically
configured with no VL servers and are unable to get any.
Fix this by not doing the DNS lookup until the first time a cell is
touched. It is waited for if we don't have any cached records yet,
otherwise the DNS lookup to maintain the record is done in the background.
This has the downside that the first time you touch a cell, you now have to
wait for the upcall to do the required DNS lookups rather than them already
being cached.
Further, the record is not replaced if the old record has at least one
server in it and the new record doesn't have any.
Fixes: 0a5143f2f89c ("afs: Implement VL server rotation")
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
afs_xattr_get_yfs() tries to free yacl, which may hold an error value (say
if yfs_fs_fetch_opaque_acl() failed and returned an error).
Fix this by allocating yacl up front (since it's a fixed-length struct,
unlike afs_acl) and passing it in to the RPC function. This also allows
the flags to be placed in the object rather than passing them through to
the RPC function.
Fixes: ae46578b963f ("afs: Get YFS ACLs and information through xattrs")
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Implement the setting of YFS ACLs in AFS through the interface of setting
the afs.yfs.acl extended attribute on the file.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
The YFS/AuriStor variant of AFS provides more capable ACLs and provides
per-volume ACLs and per-file ACLs as well as per-directory ACLs. It also
provides some extra information that can be retrieved through four ACLs:
(1) afs.yfs.acl
The YFS file ACL (not the same format as afs.acl).
(2) afs.yfs.vol_acl
The YFS volume ACL.
(3) afs.yfs.acl_inherited
"1" if a file's ACL is inherited from its parent directory, "0"
otherwise.
(4) afs.yfs.acl_num_cleaned
The number of of ACEs removed from the ACL by the server because the
PT entries were removed from the PTS database (ie. the subject is no
longer known).
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Implements the setting of ACLs in AFS by means of setting the
afs.acl extended attribute on the file.
Signed-off-by: Joe Gorse <jhgorse@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Implement an xattr on AFS files called "afs.acl" that retrieves a file's
ACL. It returns the raw AFS3 ACL from the result of calling FS.FetchACL,
leaving any interpretation to userspace.
Note that whilst YFS servers will respond to FS.FetchACL, this will render
a more-advanced YFS ACL down. Use "afs.yfs.acl" instead for that.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Log more information when "kAFS: AFS vnode with undefined type\n" is
displayed due to a vnode record being retrieved from the server that
appears to have a duff file type (usually 0). This prints more information
to try and help pin down the problem.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Provide byte-range file locking emulation that can be configured at mount
time to one of four modes:
(1) flock=local. Locking is done locally only and no reference is made to
the server.
(2) flock=openafs. Byte-range locking is done locally only; whole-file
locking is done with reference to the server. Whole-file locks cannot
be upgraded unless the client holds an exclusive lock.
(3) flock=strict. Byte-range and whole-file locking both require a
sufficient whole-file lock on the server.
(4) flock=write. As strict, but the client always gets an exclusive
whole-file lock on the server.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Implement sillyrename for AFS unlink and rename, using the NFS variant
implementation as a basis.
Note that the asynchronous file locking extender/releaser has to be
notified with a state change to stop it complaining if there's a race
between that and the actual file deletion.
A tracepoint, afs_silly_rename, is also added to note the silly rename and
the cleanup. The afs_edit_dir tracepoint is given some extra reason
indicators and the afs_flock_ev tracepoint is given a silly-delete file
lock cancellation indicator.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Holding a file lock on an AFS file does not prevent it from being deleted
on the server, so we need to handle an error resulting from that when we
try setting, extending or releasing a lock.
Fix this by adding a "deleted" lock state and cancelling the lock extension
process for that file and aborting all waiters for the lock.
Fixes: 0fafdc9f888b ("afs: Fix file locking")
Reported-by: Jonathan Billings <jsbillin@umich.edu>
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Record the timestamp on the first reply DATA packet received in response to
a set- or extend-lock operation, then use this to calculate the time
remaining till the lock expires rather than using whatever time the
requesting process wakes up and finishes processing the operation as a
base.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Split the call to afs_wait_for_call_to_complete() from afs_make_call() to
make it easier to handle asynchronous calls and to make it easier to
convert a synchronous call to an asynchronous one in future, for instance
when someone tries to interrupt an operation by pressing Ctrl-C.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
The in-kernel afs filesystem client counts the number of server-level
callback invalidation events (CB.InitCallBackState* RPC operations) that it
receives from the server. This is stored in cb_s_break in various
structures, including afs_server and afs_vnode.
If an inode is examined by afs_validate(), say, the afs_server copy is
compared, along with other break counters, to those in afs_vnode, and if
one or more of the counters do not match, it is considered that the
server's callback promise is broken. At points where this happens,
AFS_VNODE_CB_PROMISED is cleared to indicate that the status must be
refetched from the server.
afs_validate() issues an FS.FetchStatus operation to get updated metadata -
and based on the updated data_version may invalidate the pagecache too.
However, the break counters are also used to determine whether to note a
new callback in the vnode (which would set the AFS_VNODE_CB_PROMISED flag)
and whether to cache the permit data included in the YFSFetchStatus record
by the server.
The problem comes when the server sends us a CB.InitCallBackState op. The
first such instance doesn't cause cb_s_break to be incremented, but rather
causes AFS_SERVER_FL_NEW to be cleared - but thereafter, say some hours
after last use and all the volumes have been automatically unmounted and
the server has forgotten about the client[*], this *will* likely cause an
increment.
[*] There are other circumstances too, such as the server restarting or
needing to make space in its callback table.
Note that the server won't send us a CB.InitCallBackState op until we talk
to it again.
So what happens is:
(1) A mount for a new volume is attempted, a inode is created for the root
vnode and vnode->cb_s_break and AFS_VNODE_CB_PROMISED aren't set
immediately, as we don't have a nominated server to talk to yet - and
we may iterate through a few to find one.
(2) Before the operation happens, afs_fetch_status(), say, notes in the
cursor (fc.cb_break) the break counter sum from the vnode, volume and
server counters, but the server->cb_s_break is currently 0.
(3) We send FS.FetchStatus to the server. The server sends us back
CB.InitCallBackState. We increment server->cb_s_break.
(4) Our FS.FetchStatus completes. The reply includes a callback record.
(5) xdr_decode_AFSCallBack()/xdr_decode_YFSCallBack() check to see whether
the callback promise was broken by checking the break counter sum from
step (2) against the current sum.
This fails because of step (3), so we don't set the callback record
and, importantly, don't set AFS_VNODE_CB_PROMISED on the vnode.
This does not preclude the syscall from progressing, and we don't loop here
rechecking the status, but rather assume it's good enough for one round
only and will need to be rechecked next time.
(6) afs_validate() it triggered on the vnode, probably called from
d_revalidate() checking the parent directory.
(7) afs_validate() notes that AFS_VNODE_CB_PROMISED isn't set, so doesn't
update vnode->cb_s_break and assumes the vnode to be invalid.
(8) afs_validate() needs to calls afs_fetch_status(). Go back to step (2)
and repeat, every time the vnode is validated.
This primarily affects volume root dir vnodes. Everything subsequent to
those inherit an already incremented cb_s_break upon mounting.
The issue is that we assume that the callback record and the cached permit
information in a reply from the server can't be trusted after getting a
server break - but this is wrong since the server makes sure things are
done in the right order, holding up our ops if necessary[*].
[*] There is an extremely unlikely scenario where a reply from before the
CB.InitCallBackState could get its delivery deferred till after - at
which point we think we have a promise when we don't. This, however,
requires unlucky mass packet loss to one call.
AFS_SERVER_FL_NEW tries to paper over the cracks for the initial mount from
a server we've never contacted before, but this should be unnecessary.
It's also further insulated from the problem on an initial mount by
querying the server first with FS.GetCapabilities, which triggers the
CB.InitCallBackState.
Fix this by
(1) Remove AFS_SERVER_FL_NEW.
(2) In afs_calc_vnode_cb_break(), don't include cb_s_break in the
calculation.
(3) In afs_cb_is_broken(), don't include cb_s_break in the check.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Alter the AFS automounting code to create and modify an fs_context struct
when parameterising a new mount triggered by an AFS mountpoint rather than
constructing device name and option strings.
Also remove the cell=, vol= and rwpath options as they are then redundant.
The reason they existed is because the 'device name' may be derived
literally from a mountpoint object in the filesystem, so default cell and
parent-type information needed to be passed in by some other method from
the automount routines. The vol= option didn't end up being used.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Eric W. Biederman <ebiederm@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Add fs_context support to the AFS filesystem, converting the parameter
parsing to store options there.
This will form the basis for namespace propagation over mountpoints within
the AFS model, thereby allowing AFS to be used in containers more easily.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
kAFS can be given certain network errors (EADDRNOTAVAIL, EHOSTDOWN and
ERFKILL) that it doesn't handle in its server/address rotation algorithms.
They cause the probing and rotation to abort immediately rather than
rotating.
Fix this by:
(1) Abstracting out the error prioritisation from the VL and FS rotation
algorithms into a common function and expand usage into the server
probing code.
When multiple errors are available, this code selects the one we'd
prefer to return.
(2) Add handling for EADDRNOTAVAIL, EHOSTDOWN and ERFKILL.
Fixes: 0fafdc9f888b ("afs: Fix file locking")
Fixes: 0338747d8454 ("afs: Probe multiple fileservers simultaneously")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Send probes to all the unprobed fileservers in a fileserver list on all
addresses simultaneously in an attempt to find out the fastest route whilst
not getting stuck for 20s on any server or address that we don't get a
reply from.
This alleviates the problem whereby attempting to access a new server can
take a long time because the rotation algorithm ends up rotating through
all servers and addresses until it finds one that responds.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
In some circumstances, the callback interest pointer is NULL, so in such a
case we can't dereference it when checking to see if the callback is
broken. This causes an oops in some circumstances.
Fix this by replacing the function that worked out the aggregate break
counter with one that actually does the comparison, and then make that
return true (ie. broken) if there is no callback interest as yet (ie. the
pointer is NULL).
Fixes: 68251f0a6818 ("afs: Fix whole-volume callback handling")
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Eliminate the address pointer from the address list cursor as it's
redundant (ac->addrs[ac->index] can be used to find the same address) and
address lists must be replaced rather than being rearranged, so is of
limited value.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Provide an option to allow the file or volume location server cursor to be
dumped if the rotation routine falls off the end without managing to
contact a server.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Implement support for talking to YFS-variant fileservers in the cache
manager and the filesystem client. These implement upgraded services on
the same port as their AFS services.
YFS fileservers provide expanded capabilities over AFS.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Calculate the callback expiration time at the point of operation reply
delivery, using the reply time queried from AF_RXRPC on that call as a
base.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Add a couple of tracepoints to log the production of I/O errors within the AFS
filesystem.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Track VL servers as independent entities rather than lumping all their
addresses together into one set and implement server-level rotation by:
(1) Add the concept of a VL server list, where each server has its own
separate address list. This code is similar to the FS server list.
(2) Use the DNS resolver to retrieve a set of servers and their associated
addresses, ports, preference and weight ratings.
(3) In the case of a legacy DNS resolver or an address list given directly
through /proc/net/afs/cells, create a list containing just a dummy
server record and attach all the addresses to that.
(4) Implement a simple rotation policy, for the moment ignoring the
priorities and weights assigned to the servers.
(5) Show the address list through /proc/net/afs/<cell>/vlservers. This
also displays the source and status of the data as indicated by the
upcall.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Improve the error handling in FS server rotation by:
(1) Cache the latest useful error value for the fs operation as a whole in
struct afs_fs_cursor separately from the error cached in the
afs_addr_cursor struct. The one in the address cursor gets clobbered
occasionally. Copy over the error to the fs operation only when it's
something we'd be interested in passing to userspace.
(2) Make it so that EDESTADDRREQ is the default that is seen only if no
addresses are available to be accessed.
(3) When calling utility functions, such as checking a volume status or
probing a fileserver, don't let a successful result clobber the cached
error in the cursor; instead, stash the result in a temporary variable
until it has been assessed.
(4) Don't return ETIMEDOUT or ETIME if a better error, such as
ENETUNREACH, is already cached.
(5) On leaving the rotation loop, turn any remote abort code into a more
useful error than ECONNABORTED.
Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation")
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
afs_extract_data sets up a temporary iov_iter and passes it to AF_RXRPC
each time it is called to describe the remaining buffer to be filled.
Instead:
(1) Put an iterator in the afs_call struct.
(2) Set the iterator for each marshalling stage to load data into the
appropriate places. A number of convenience functions are provided to
this end (eg. afs_extract_to_buf()).
This iterator is then passed to afs_extract_data().
(3) Use the new ITER_DISCARD iterator to discard any excess data provided
by FetchData.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Include the site of detection of AFS protocol errors in trace lines to
better be able to determine what went wrong.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Conflicts were easy to resolve using immediate context mostly,
except the cls_u32.c one where I simply too the entire HEAD
chunk.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Access to the list of cells by /proc/net/afs/cells has a couple of
problems:
(1) It should be checking against SEQ_START_TOKEN for the keying the
header line.
(2) It's only holding the RCU read lock, so it can't just walk over the
list without following the proper RCU methods.
Fix these by using an hlist instead of an ordinary list and using the
appropriate accessor functions to follow it with RCU.
Since the code that adds a cell to the list must also necessarily change,
sort the list on insertion whilst we're at it.
Fixes: 989782dcdc91 ("afs: Overhaul cell database management")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Note the maximum allocated capacity in an afs_addr_list struct and discard
addresses that would exceed it in afs_merge_fs_addr{4,6}().
Also, since the current maximum capacity is less than 255, reduce the
relevant members to bytes.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Use new return type vm_fault_t for fault handler in struct
vm_operations_struct. For now, this is just documenting that the
function returns a VM_FAULT value rather than an errno. Once all
instances are converted, vm_fault_t will become a distinct type.
See 1c8f422059ae ("mm: change return type to vm_fault_t") for reference.
Link: http://lkml.kernel.org/r/20180702152017.GA3780@jordon-HP-15-Notebook-PC
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
At the moment, afs_break_callbacks calls afs_break_one_callback() for each
separate FID it was given, and the latter looks up the volume individually
for each one.
However, this is inefficient if two or more FIDs have the same vid as we
could reuse the volume. This is complicated by cell aliasing whereby we
may have multiple cells sharing a volume and can therefore have multiple
callback interests for any particular volume ID.
At the moment afs_break_one_callback() scans the entire list of volumes
we're getting from a server and breaks the appropriate callback in every
matching volume, regardless of cell. This scan is done for every FID.
Optimise callback breaking by the following means:
(1) Sort the FID list by vid so that all FIDs belonging to the same volume
are clumped together.
This is done through the use of an indirection table as we cannot do
an insertion sort on the afs_callback_break array as we decode FIDs
into it as we subsequently also have to decode callback info into it
that corresponds by array index only.
We also don't really want to bubblesort afterwards if we can avoid it.
(2) Sort the server->cb_interests array by vid so that all the matching
volumes are grouped together. This permits the scan to stop after
finding a record that has a higher vid.
(3) When breaking FIDs, we try to keep server->cb_break_lock as long as
possible, caching the start point in the array for that volume group
as long as possible.
It might make sense to add another layer in that list and have a
refcounted volume ID anchor that has the matching interests attached
to it rather than being in the list. This would allow the lock to be
dropped without losing the cursor.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Alter the dynroot mount so that cells created by manipulation of
/proc/fs/afs/cells and /proc/fs/afs/rootcell and by specification of a root
cell as a module parameter will cause directories for those cells to be
created in the dynamic root superblock for the network namespace[*].
To this end:
(1) Only one dynamic root superblock is now created per network namespace
and this is shared between all attempts to mount it. This makes it
easier to find the superblock to modify.
(2) When a dynamic root superblock is created, the list of cells is walked
and directories created for each cell already defined.
(3) When a new cell is added, if a dynamic root superblock exists, a
directory is created for it.
(4) When a cell is destroyed, the directory is removed.
(5) These directories are created by calling lookup_one_len() on the root
dir which automatically creates them if they don't exist.
[*] Inasmuch as network namespaces are currently supported here.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
The AFS filesystem depends at the moment on /proc for configuration and
also presents information that way - however, this causes a compilation
failure if procfs is disabled.
Fix it so that the procfs bits aren't compiled in if procfs is disabled.
This means that you can't configure the AFS filesystem directly, but it is
still usable provided that an up-to-date keyutils is installed to look up
cells by SRV or AFSDB DNS records.
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
backmerge AFS fixes that went into mainline and deal with
the conflict in fs/afs/fsclient.c
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Implement network namespacing within AFS, but don't yet let mounts occur
outside the init namespace. An additional patch will be required propagate
the network namespace across automounts.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
The afs_net::ws_cell member is sometimes used under RCU conditions from
within an seq-readlock. It isn't, however, marked __rcu and it isn't set
using the proper RCU barrier-imposing functions.
Fix this by annotating it with __rcu and using appropriate barriers to
make sure accesses are correctly ordered.
Without this, the code can produce the following warning:
>> fs/afs/proc.c:151:24: sparse: incompatible types in comparison expression (different address spaces)
Fixes: f044c8847bb6 ("afs: Lay the groundwork for supporting network namespaces")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
It's possible for an AFS file server to issue a whole-volume notification
that callbacks on all the vnodes in the file have been broken. This is
done for R/O and backup volumes (which don't have per-file callbacks) and
for things like a volume being taken offline.
Fix callback handling to detect whole-volume notifications, to track it
across operations and to check it during inode validation.
Fixes: c435ee34551e ("afs: Overhaul the callback handling")
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
The refcounting on afs_cb_interest struct objects in
afs_register_server_cb_interest() is wrong as it uses the server list
entry's call back interest pointer without regard for the fact that it
might be replaced at any time and the object thrown away.
Fix this by:
(1) Put a lock on the afs_server_list struct that can be used to
mediate access to the callback interest pointers in the servers array.
(2) Keep a ref on the callback interest that we get from the entry.
(3) Dropping the old reference held by vnode->cb_interest if we replace
the pointer.
Fixes: c435ee34551e ("afs: Overhaul the callback handling")
Signed-off-by: David Howells <dhowells@redhat.com>
|
David Howells
Joe Gorse
David S. Miller
Souptick Joarder
Al Viro