| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add an alternate API by which the cache can be accessed through a kiocb,
doing async DIO, rather than using the current API that tells the cache
where all the pages are.
The new API is intended to be used in conjunction with the netfs helper
library. A filesystem must pick one or the other and not mix them.
Filesystems wanting to use the new API must #define FSCACHE_USE_NEW_IO_API
before #including the header. This prevents them from continuing to use
the old API at the same time as there are incompatibilities in how the
PG_fscache page bit is used.
Changes:
v6:
- Provide a routine to shape a write so that the start and length can be
aligned for DIO[3].
v4:
- Use the vfs_iocb_iter_read/write() helpers[1]
- Move initial definition of fscache_begin_read_operation() here.
- Remove a commented-out line[2]
- Combine ki->term_func calls in cachefiles_read_complete()[2].
- Remove explicit NULL initialiser[2].
- Remove extern on func decl[2].
- Put in param names on func decl[2].
- Remove redundant else[2].
- Fill out the kdoc comment for fscache_begin_read_operation().
- Rename fs/fscache/page2.c to io.c to match later patches.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Dave Wysochanski <dwysocha@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: Christoph Hellwig <hch@lst.de>
cc: linux-cachefs@redhat.com
cc: linux-afs@lists.infradead.org
cc: linux-nfs@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: ceph-devel@vger.kernel.org
cc: v9fs-developer@lists.sourceforge.net
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20210216102614.GA27555@lst.de/ [1]
Link: https://lore.kernel.org/r/20210216084230.GA23669@lst.de/ [2]
Link: https://lore.kernel.org/r/161781047695.463527.7463536103593997492.stgit@warthog.procyon.org.uk/ [3]
Link: https://lore.kernel.org/r/161118142558.1232039.17993829899588971439.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161037850.2537118.8819808229350326503.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340402057.1303470.8038373593844486698.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539545919.286939.14573472672781434757.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653801477.2770958.10543270629064934227.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789084517.6155.12799689829859169640.stgit@warthog.procyon.org.uk/ # v6
|
|
Pull cachefiles and afs fixes from David Howells:
"Fixes from Matthew Wilcox for page waiting-related issues in
cachefiles and afs as extracted from his folio series[1]:
- In cachefiles, remove the use of the wait_bit_key struct to access
something that's actually in wait_page_key format. The proper
struct is now available in the header, so that should be used
instead.
- Add a proper wait function for waiting killably on the page
writeback flag. This includes a recent bugfix[2] that's not in the
afs code.
- In afs, use the function added in (2) rather than using
wait_on_page_bit_killable() which doesn't provide the
aforementioned bugfix"
Link: https://lore.kernel.org/r/20210320054104.1300774-1-willy@infradead.org[1]
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=c2407cf7d22d0c0d94cf20342b3b8f06f1d904e7 [2]
Link: https://lore.kernel.org/r/20210323120829.GC1719932@casper.infradead.org/ # v1
* tag 'afs-cachefiles-fixes-20210323' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Use wait_on_page_writeback_killable
mm/writeback: Add wait_on_page_writeback_killable
fs/cachefiles: Remove wait_bit_key layout dependency
|
|
Based on discussions (e.g. in [1]) my understanding of cachefiles and
the cachefiles userspace daemon is that it creates a cache on a local
filesystem (e.g. ext4, xfs etc.) for a network filesystem. The way this
is done is by writing "bind" to /dev/cachefiles and pointing it to the
directory to use as the cache.
Currently this directory can technically also be an idmapped mount but
cachefiles aren't yet fully aware of such mounts and thus don't take the
idmapping into account when creating cache entries. This could leave
users confused as the ownership of the files wouldn't match to what they
expressed in the idmapping. Block cache files on idmapped mounts until
the fscache rework is done and we have ported it to support idmapped
mounts.
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/lkml/20210303161528.n3jzg66ou2wa43qb@wittgenstein [1]
Link: https://lore.kernel.org/r/20210316112257.2974212-1-christian.brauner@ubuntu.com/ # v1
Link: https://listman.redhat.com/archives/linux-cachefs/2021-March/msg00044.html # v2
Link: https://lore.kernel.org/r/20210319114146.410329-1-christian.brauner@ubuntu.com/ # v3
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Cachefiles was relying on wait_page_key and wait_bit_key being the
same layout, which is fragile. Now that wait_page_key is exposed in
the pagemap.h header, we can remove that fragility
A comment on the need to maintain structure layout equivalence was added by
Linus[1] and that is no longer applicable.
Fixes: 62906027091f ("mm: add PageWaiters indicating tasks are waiting for a page bit")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: kafs-testing@auristor.com
cc: linux-cachefs@redhat.com
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20210320054104.1300774-2-willy@infradead.org/
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=3510ca20ece0150af6b10c77a74ff1b5c198e3e2 [1]
|
|
Pull idmapped mounts from Christian Brauner:
"This introduces idmapped mounts which has been in the making for some
time. Simply put, different mounts can expose the same file or
directory with different ownership. This initial implementation comes
with ports for fat, ext4 and with Christoph's port for xfs with more
filesystems being actively worked on by independent people and
maintainers.
Idmapping mounts handle a wide range of long standing use-cases. Here
are just a few:
- Idmapped mounts make it possible to easily share files between
multiple users or multiple machines especially in complex
scenarios. For example, idmapped mounts will be used in the
implementation of portable home directories in
systemd-homed.service(8) where they allow users to move their home
directory to an external storage device and use it on multiple
computers where they are assigned different uids and gids. This
effectively makes it possible to assign random uids and gids at
login time.
- It is possible to share files from the host with unprivileged
containers without having to change ownership permanently through
chown(2).
- It is possible to idmap a container's rootfs and without having to
mangle every file. For example, Chromebooks use it to share the
user's Download folder with their unprivileged containers in their
Linux subsystem.
- It is possible to share files between containers with
non-overlapping idmappings.
- Filesystem that lack a proper concept of ownership such as fat can
use idmapped mounts to implement discretionary access (DAC)
permission checking.
- They allow users to efficiently changing ownership on a per-mount
basis without having to (recursively) chown(2) all files. In
contrast to chown (2) changing ownership of large sets of files is
instantenous with idmapped mounts. This is especially useful when
ownership of a whole root filesystem of a virtual machine or
container is changed. With idmapped mounts a single syscall
mount_setattr syscall will be sufficient to change the ownership of
all files.
- Idmapped mounts always take the current ownership into account as
idmappings specify what a given uid or gid is supposed to be mapped
to. This contrasts with the chown(2) syscall which cannot by itself
take the current ownership of the files it changes into account. It
simply changes the ownership to the specified uid and gid. This is
especially problematic when recursively chown(2)ing a large set of
files which is commong with the aforementioned portable home
directory and container and vm scenario.
- Idmapped mounts allow to change ownership locally, restricting it
to specific mounts, and temporarily as the ownership changes only
apply as long as the mount exists.
Several userspace projects have either already put up patches and
pull-requests for this feature or will do so should you decide to pull
this:
- systemd: In a wide variety of scenarios but especially right away
in their implementation of portable home directories.
https://systemd.io/HOME_DIRECTORY/
- container runtimes: containerd, runC, LXD:To share data between
host and unprivileged containers, unprivileged and privileged
containers, etc. The pull request for idmapped mounts support in
containerd, the default Kubernetes runtime is already up for quite
a while now: https://github.com/containerd/containerd/pull/4734
- The virtio-fs developers and several users have expressed interest
in using this feature with virtual machines once virtio-fs is
ported.
- ChromeOS: Sharing host-directories with unprivileged containers.
I've tightly synced with all those projects and all of those listed
here have also expressed their need/desire for this feature on the
mailing list. For more info on how people use this there's a bunch of
talks about this too. Here's just two recent ones:
https://www.cncf.io/wp-content/uploads/2020/12/Rootless-Containers-in-Gitpod.pdf
https://fosdem.org/2021/schedule/event/containers_idmap/
This comes with an extensive xfstests suite covering both ext4 and
xfs:
https://git.kernel.org/brauner/xfstests-dev/h/idmapped_mounts
It covers truncation, creation, opening, xattrs, vfscaps, setid
execution, setgid inheritance and more both with idmapped and
non-idmapped mounts. It already helped to discover an unrelated xfs
setgid inheritance bug which has since been fixed in mainline. It will
be sent for inclusion with the xfstests project should you decide to
merge this.
In order to support per-mount idmappings vfsmounts are marked with
user namespaces. The idmapping of the user namespace will be used to
map the ids of vfs objects when they are accessed through that mount.
By default all vfsmounts are marked with the initial user namespace.
The initial user namespace is used to indicate that a mount is not
idmapped. All operations behave as before and this is verified in the
testsuite.
Based on prior discussions we want to attach the whole user namespace
and not just a dedicated idmapping struct. This allows us to reuse all
the helpers that already exist for dealing with idmappings instead of
introducing a whole new range of helpers. In addition, if we decide in
the future that we are confident enough to enable unprivileged users
to setup idmapped mounts the permission checking can take into account
whether the caller is privileged in the user namespace the mount is
currently marked with.
The user namespace the mount will be marked with can be specified by
passing a file descriptor refering to the user namespace as an
argument to the new mount_setattr() syscall together with the new
MOUNT_ATTR_IDMAP flag. The system call follows the openat2() pattern
of extensibility.
The following conditions must be met in order to create an idmapped
mount:
- The caller must currently have the CAP_SYS_ADMIN capability in the
user namespace the underlying filesystem has been mounted in.
- The underlying filesystem must support idmapped mounts.
- The mount must not already be idmapped. This also implies that the
idmapping of a mount cannot be altered once it has been idmapped.
- The mount must be a detached/anonymous mount, i.e. it must have
been created by calling open_tree() with the OPEN_TREE_CLONE flag
and it must not already have been visible in the filesystem.
The last two points guarantee easier semantics for userspace and the
kernel and make the implementation significantly simpler.
By default vfsmounts are marked with the initial user namespace and no
behavioral or performance changes are observed.
The manpage with a detailed description can be found here:
https://git.kernel.org/brauner/man-pages/c/1d7b902e2875a1ff342e036a9f866a995640aea8
In order to support idmapped mounts, filesystems need to be changed
and mark themselves with the FS_ALLOW_IDMAP flag in fs_flags. The
patches to convert individual filesystem are not very large or
complicated overall as can be seen from the included fat, ext4, and
xfs ports. Patches for other filesystems are actively worked on and
will be sent out separately. The xfstestsuite can be used to verify
that port has been done correctly.
The mount_setattr() syscall is motivated independent of the idmapped
mounts patches and it's been around since July 2019. One of the most
valuable features of the new mount api is the ability to perform
mounts based on file descriptors only.
Together with the lookup restrictions available in the openat2()
RESOLVE_* flag namespace which we added in v5.6 this is the first time
we are close to hardened and race-free (e.g. symlinks) mounting and
path resolution.
While userspace has started porting to the new mount api to mount
proper filesystems and create new bind-mounts it is currently not
possible to change mount options of an already existing bind mount in
the new mount api since the mount_setattr() syscall is missing.
With the addition of the mount_setattr() syscall we remove this last
restriction and userspace can now fully port to the new mount api,
covering every use-case the old mount api could. We also add the
crucial ability to recursively change mount options for a whole mount
tree, both removing and adding mount options at the same time. This
syscall has been requested multiple times by various people and
projects.
There is a simple tool available at
https://github.com/brauner/mount-idmapped
that allows to create idmapped mounts so people can play with this
patch series. I'll add support for the regular mount binary should you
decide to pull this in the following weeks:
Here's an example to a simple idmapped mount of another user's home
directory:
u1001@f2-vm:/$ sudo ./mount --idmap both:1000:1001:1 /home/ubuntu/ /mnt
u1001@f2-vm:/$ ls -al /home/ubuntu/
total 28
drwxr-xr-x 2 ubuntu ubuntu 4096 Oct 28 22:07 .
drwxr-xr-x 4 root root 4096 Oct 28 04:00 ..
-rw------- 1 ubuntu ubuntu 3154 Oct 28 22:12 .bash_history
-rw-r--r-- 1 ubuntu ubuntu 220 Feb 25 2020 .bash_logout
-rw-r--r-- 1 ubuntu ubuntu 3771 Feb 25 2020 .bashrc
-rw-r--r-- 1 ubuntu ubuntu 807 Feb 25 2020 .profile
-rw-r--r-- 1 ubuntu ubuntu 0 Oct 16 16:11 .sudo_as_admin_successful
-rw------- 1 ubuntu ubuntu 1144 Oct 28 00:43 .viminfo
u1001@f2-vm:/$ ls -al /mnt/
total 28
drwxr-xr-x 2 u1001 u1001 4096 Oct 28 22:07 .
drwxr-xr-x 29 root root 4096 Oct 28 22:01 ..
-rw------- 1 u1001 u1001 3154 Oct 28 22:12 .bash_history
-rw-r--r-- 1 u1001 u1001 220 Feb 25 2020 .bash_logout
-rw-r--r-- 1 u1001 u1001 3771 Feb 25 2020 .bashrc
-rw-r--r-- 1 u1001 u1001 807 Feb 25 2020 .profile
-rw-r--r-- 1 u1001 u1001 0 Oct 16 16:11 .sudo_as_admin_successful
-rw------- 1 u1001 u1001 1144 Oct 28 00:43 .viminfo
u1001@f2-vm:/$ touch /mnt/my-file
u1001@f2-vm:/$ setfacl -m u:1001:rwx /mnt/my-file
u1001@f2-vm:/$ sudo setcap -n 1001 cap_net_raw+ep /mnt/my-file
u1001@f2-vm:/$ ls -al /mnt/my-file
-rw-rwxr--+ 1 u1001 u1001 0 Oct 28 22:14 /mnt/my-file
u1001@f2-vm:/$ ls -al /home/ubuntu/my-file
-rw-rwxr--+ 1 ubuntu ubuntu 0 Oct 28 22:14 /home/ubuntu/my-file
u1001@f2-vm:/$ getfacl /mnt/my-file
getfacl: Removing leading '/' from absolute path names
# file: mnt/my-file
# owner: u1001
# group: u1001
user::rw-
user:u1001:rwx
group::rw-
mask::rwx
other::r--
u1001@f2-vm:/$ getfacl /home/ubuntu/my-file
getfacl: Removing leading '/' from absolute path names
# file: home/ubuntu/my-file
# owner: ubuntu
# group: ubuntu
user::rw-
user:ubuntu:rwx
group::rw-
mask::rwx
other::r--"
* tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: (41 commits)
xfs: remove the possibly unused mp variable in xfs_file_compat_ioctl
xfs: support idmapped mounts
ext4: support idmapped mounts
fat: handle idmapped mounts
tests: add mount_setattr() selftests
fs: introduce MOUNT_ATTR_IDMAP
fs: add mount_setattr()
fs: add attr_flags_to_mnt_flags helper
fs: split out functions to hold writers
namespace: only take read lock in do_reconfigure_mnt()
mount: make {lock,unlock}_mount_hash() static
namespace: take lock_mount_hash() directly when changing flags
nfs: do not export idmapped mounts
overlayfs: do not mount on top of idmapped mounts
ecryptfs: do not mount on top of idmapped mounts
ima: handle idmapped mounts
apparmor: handle idmapped mounts
fs: make helpers idmap mount aware
exec: handle idmapped mounts
would_dump: handle idmapped mounts
...
|
|
The various vfs_*() helpers are called by filesystems or by the vfs
itself to perform core operations such as create, link, mkdir, mknod, rename,
rmdir, tmpfile and unlink. Enable them to handle idmapped mounts. If the
inode is accessed through an idmapped mount map it into the
mount's user namespace and pass it down. Afterwards the checks and
operations are identical to non-idmapped mounts. If the initial user
namespace is passed nothing changes so non-idmapped mounts will see
identical behavior as before.
Link: https://lore.kernel.org/r/20210121131959.646623-15-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
In order to handle idmapped mounts we will extend the vfs rename helper
to take two new arguments in follow up patches. Since this operations
already takes a bunch of arguments add a simple struct renamedata and
make the current helper use it before we extend it.
Link: https://lore.kernel.org/r/20210121131959.646623-14-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
When interacting with extended attributes the vfs verifies that the
caller is privileged over the inode with which the extended attribute is
associated. For posix access and posix default extended attributes a uid
or gid can be stored on-disk. Let the functions handle posix extended
attributes on idmapped mounts. If the inode is accessed through an
idmapped mount we need to map it according to the mount's user
namespace. Afterwards the checks are identical to non-idmapped mounts.
This has no effect for e.g. security xattrs since they don't store uids
or gids and don't perform permission checks on them like posix acls do.
Link: https://lore.kernel.org/r/20210121131959.646623-10-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Tycho Andersen <tycho@tycho.pizza>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
When file attributes are changed most filesystems rely on the
setattr_prepare(), setattr_copy(), and notify_change() helpers for
initialization and permission checking. Let them handle idmapped mounts.
If the inode is accessed through an idmapped mount map it into the
mount's user namespace. Afterwards the checks are identical to
non-idmapped mounts. If the initial user namespace is passed nothing
changes so non-idmapped mounts will see identical behavior as before.
Helpers that perform checks on the ia_uid and ia_gid fields in struct
iattr assume that ia_uid and ia_gid are intended values and have already
been mapped correctly at the userspace-kernelspace boundary as we
already do today. If the initial user namespace is passed nothing
changes so non-idmapped mounts will see identical behavior as before.
Link: https://lore.kernel.org/r/20210121131959.646623-8-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
After the recent actions to convert readpages aops to readahead, the
NULL checks of readpages aops in cachefiles_read_or_alloc_page() may
hit falsely. More badly, it's an ASSERT() call, and this panics.
Drop the superfluous NULL checks for fixing this regression.
[DH: Note that cachefiles never actually used readpages, so this check was
never actually necessary]
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208883
BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1175245
Fixes: 9ae326a69004 ("CacheFiles: A cache that backs onto a mounted filesystem")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If ->readpage returns an error, it has already unlocked the page.
Fixes: 5e929b33c393 ("CacheFiles: Handle truncate unlocking the page we're reading")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
__kernel_write doesn't take a sb_writers references, which we need here.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Howells <dhowells@redhat.com>
|
|
Pull documentation updates from Jonathan Corbet:
"A fair amount of stuff this time around, dominated by yet another
massive set from Mauro toward the completion of the RST conversion. I
*really* hope we are getting close to the end of this. Meanwhile,
those patches reach pretty far afield to update document references
around the tree; there should be no actual code changes there. There
will be, alas, more of the usual trivial merge conflicts.
Beyond that we have more translations, improvements to the sphinx
scripting, a number of additions to the sysctl documentation, and lots
of fixes"
* tag 'docs-5.8' of git://git.lwn.net/linux: (130 commits)
Documentation: fixes to the maintainer-entry-profile template
zswap: docs/vm: Fix typo accept_threshold_percent in zswap.rst
tracing: Fix events.rst section numbering
docs: acpi: fix old http link and improve document format
docs: filesystems: add info about efivars content
Documentation: LSM: Correct the basic LSM description
mailmap: change email for Ricardo Ribalda
docs: sysctl/kernel: document unaligned controls
Documentation: admin-guide: update bug-hunting.rst
docs: sysctl/kernel: document ngroups_max
nvdimm: fixes to maintainter-entry-profile
Documentation/features: Correct RISC-V kprobes support entry
Documentation/features: Refresh the arch support status files
Revert "docs: sysctl/kernel: document ngroups_max"
docs: move locking-specific documents to locking/
docs: move digsig docs to the security book
docs: move the kref doc into the core-api book
docs: add IRQ documentation at the core-api book
docs: debugging-via-ohci1394.txt: add it to the core-api book
docs: fix references for ipmi.rst file
...
|
|
There is a potential race in fscache operation enqueuing for reading and
copying multiple pages from cachefiles to netfs. The problem can be seen
easily on a heavy loaded system (for example many processes reading files
continually on an NFS share covered by fscache triggered this problem within
a few minutes).
The race is due to cachefiles_read_waiter() adding the op to the monitor
to_do list and then then drop the object->work_lock spinlock before
completing fscache_enqueue_operation(). Once the lock is dropped,
cachefiles_read_copier() grabs the op, completes processing it, and
makes it through fscache_retrieval_complete() which sets the op->state to
the final state of FSCACHE_OP_ST_COMPLETE(4). When cachefiles_read_waiter()
finally gets through the remainder of fscache_enqueue_operation()
it sees the invalid state, and hits the ASSERTCMP and the following
oops is seen:
[ 2259.612361] FS-Cache:
[ 2259.614785] FS-Cache: Assertion failed
[ 2259.618639] FS-Cache: 4 == 5 is false
[ 2259.622456] ------------[ cut here ]------------
[ 2259.627190] kernel BUG at fs/fscache/operation.c:70!
...
[ 2259.791675] RIP: 0010:[<ffffffffc061b4cf>] [<ffffffffc061b4cf>] fscache_enqueue_operation+0xff/0x170 [fscache]
[ 2259.802059] RSP: 0000:ffffa0263d543be0 EFLAGS: 00010046
[ 2259.807521] RAX: 0000000000000019 RBX: ffffa01a4d390480 RCX: 0000000000000006
[ 2259.814847] RDX: 0000000000000000 RSI: 0000000000000046 RDI: ffffa0263d553890
[ 2259.822176] RBP: ffffa0263d543be8 R08: 0000000000000000 R09: ffffa0263c2d8708
[ 2259.829502] R10: 0000000000001e7f R11: 0000000000000000 R12: ffffa01a4d390480
[ 2259.844483] R13: ffff9fa9546c5920 R14: ffffa0263d543c80 R15: ffffa0293ff9bf10
[ 2259.859554] FS: 00007f4b6efbd700(0000) GS:ffffa0263d540000(0000) knlGS:0000000000000000
[ 2259.875571] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2259.889117] CR2: 00007f49e1624ff0 CR3: 0000012b38b38000 CR4: 00000000007607e0
[ 2259.904015] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 2259.918764] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 2259.933449] PKRU: 55555554
[ 2259.943654] Call Trace:
[ 2259.953592] <IRQ>
[ 2259.955577] [<ffffffffc03a7c12>] cachefiles_read_waiter+0x92/0xf0 [cachefiles]
[ 2259.978039] [<ffffffffa34d3942>] __wake_up_common+0x82/0x120
[ 2259.991392] [<ffffffffa34d3a63>] __wake_up_common_lock+0x83/0xc0
[ 2260.004930] [<ffffffffa34d3510>] ? task_rq_unlock+0x20/0x20
[ 2260.017863] [<ffffffffa34d3ab3>] __wake_up+0x13/0x20
[ 2260.030230] [<ffffffffa34c72a0>] __wake_up_bit+0x50/0x70
[ 2260.042535] [<ffffffffa35bdcdb>] unlock_page+0x2b/0x30
[ 2260.054495] [<ffffffffa35bdd09>] page_endio+0x29/0x90
[ 2260.066184] [<ffffffffa368fc81>] mpage_end_io+0x51/0x80
CPU1
cachefiles_read_waiter()
20 static int cachefiles_read_waiter(wait_queue_entry_t *wait, unsigned mode,
21 int sync, void *_key)
22 {
...
61 spin_lock(&object->work_lock);
62 list_add_tail(&monitor->op_link, &op->to_do);
63 spin_unlock(&object->work_lock);
<begin race window>
64
65 fscache_enqueue_retrieval(op);
182 static inline void fscache_enqueue_retrieval(struct fscache_retrieval *op)
183 {
184 fscache_enqueue_operation(&op->op);
185 }
58 void fscache_enqueue_operation(struct fscache_operation *op)
59 {
60 struct fscache_cookie *cookie = op->object->cookie;
61
62 _enter("{OBJ%x OP%x,%u}",
63 op->object->debug_id, op->debug_id, atomic_read(&op->usage));
64
65 ASSERT(list_empty(&op->pend_link));
66 ASSERT(op->processor != NULL);
67 ASSERT(fscache_object_is_available(op->object));
68 ASSERTCMP(atomic_read(&op->usage), >, 0);
<end race window>
CPU2
cachefiles_read_copier()
168 while (!list_empty(&op->to_do)) {
...
202 fscache_end_io(op, monitor->netfs_page, error);
203 put_page(monitor->netfs_page);
204 fscache_retrieval_complete(op, 1);
CPU1
58 void fscache_enqueue_operation(struct fscache_operation *op)
59 {
...
69 ASSERTIFCMP(op->state != FSCACHE_OP_ST_IN_PROGRESS,
70 op->state, ==, FSCACHE_OP_ST_CANCELLED);
Signed-off-by: Lei Xue <carmark.dlut@gmail.com>
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
- Add a SPDX header;
- Adjust document title;
- Mark literal blocks as such;
- Add table markups;
- Comment out text ToC for html/pdf output;
- Add lists markups;
- Add it to filesystems/caching/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/eec0cfc268e8dca348f760224685100c9c2caba6.1588021877.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
The patch which changed cachefiles from calling ->bmap() to using the
bmap() wrapper overwrote the running return value with the result of
calling bmap(). This causes an assertion failure elsewhere in the code.
Fix this by using ret2 rather than ret to hold the return value.
The oops looks like:
kernel BUG at fs/nfs/fscache.c:468!
...
RIP: 0010:__nfs_readpages_from_fscache+0x18b/0x190 [nfs]
...
Call Trace:
nfs_readpages+0xbf/0x1c0 [nfs]
? __alloc_pages_nodemask+0x16c/0x320
read_pages+0x67/0x1a0
__do_page_cache_readahead+0x1cf/0x1f0
ondemand_readahead+0x172/0x2b0
page_cache_async_readahead+0xaa/0xe0
generic_file_buffered_read+0x852/0xd50
? mem_cgroup_commit_charge+0x6e/0x140
? nfs4_have_delegation+0x19/0x30 [nfsv4]
generic_file_read_iter+0x100/0x140
? nfs_revalidate_mapping+0x176/0x2b0 [nfs]
nfs_file_read+0x6d/0xc0 [nfs]
new_sync_read+0x11a/0x1c0
__vfs_read+0x29/0x40
vfs_read+0x8e/0x140
ksys_read+0x61/0xd0
__x64_sys_read+0x1a/0x20
do_syscall_64+0x60/0x1e0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f5d148267e0
Fixes: 10d83e11a582 ("cachefiles: drop direct usage of ->bmap method.")
Reported-by: David Wysochanski <dwysocha@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: David Wysochanski <dwysocha@redhat.com>
cc: Carlos Maiolino <cmaiolino@redhat.com>
|
|
Replace the direct usage of ->bmap method by a bmap() call.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public licence as published by
the free software foundation either version 2 of the licence or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 114 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190520170857.552531963@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
linux/xattr.h is included more than once.
Link: http://lkml.kernel.org/r/5c86803d.1c69fb81.1a7c6.2b78@mx.google.com
Signed-off-by: Sabyasachi Gupta <sabyasachi.linux@gmail.com>
Acked-by: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Variable 'cache' is being assigned but is never used hence it is
redundant and can be removed.
Cleans up clang warning:
warning: variable 'cache' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
get_seconds() returns an unsigned long can overflow on some architectures
and is deprecated because of that. In cachefs, we cast that number to
a a 32-bit integer, which will overflow in year 2106 on all architectures.
As confirmed by David Howells, the overflow probably isn't harmful
in the end, since the timestamps are only used to make the file names
unique, but they don't strictly have to be in monotonically increasing
order since the files only exist in order to be deleted as quickly
as possible.
Moving to ktime_get_real_seconds() avoids the deprecated interface.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Clang warns when one enumerated type is implicitly converted to another.
fs/cachefiles/namei.c:247:50: warning: implicit conversion from
enumeration type 'enum cachefiles_obj_ref_trace' to different
enumeration type 'enum fscache_obj_ref_trace' [-Wenum-conversion]
cache->cache.ops->put_object(&xobject->fscache,
cachefiles_obj_put_wait_retry);
Silence this warning by explicitly casting to fscache_obj_ref_trace,
which is also done in put_object.
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
[Description]
In a heavily loaded system where the system pagecache is nearing memory
limits and fscache is enabled, pages can be leaked by fscache while trying
read pages from cachefiles backend. This can happen because two
applications can be reading same page from a single mount, two threads can
be trying to read the backing page at same time. This results in one of
the threads finding that a page for the backing file or netfs file is
already in the radix tree. During the error handling cachefiles does not
clean up the reference on backing page, leading to page leak.
[Fix]
The fix is straightforward, to decrement the reference when error is
encountered.
[dhowells: Note that I've removed the clearance and put of newpage as
they aren't attested in the commit message and don't appear to actually
achieve anything since a new page is only allocated is newpage!=NULL and
any residual new page is cleared before returning.]
[Testing]
I have tested the fix using following method for 12+ hrs.
1) mkdir -p /mnt/nfs ; mount -o vers=3,fsc <server_ip>:/export /mnt/nfs
2) create 10000 files of 2.8MB in a NFS mount.
3) start a thread to simulate heavy VM presssure
(while true ; do echo 3 > /proc/sys/vm/drop_caches ; sleep 1 ; done)&
4) start multiple parallel reader for data set at same time
find /mnt/nfs -type f | xargs -P 80 cat > /dev/null &
find /mnt/nfs -type f | xargs -P 80 cat > /dev/null &
find /mnt/nfs -type f | xargs -P 80 cat > /dev/null &
..
..
find /mnt/nfs -type f | xargs -P 80 cat > /dev/null &
find /mnt/nfs -type f | xargs -P 80 cat > /dev/null &
5) finally check using cat /proc/fs/fscache/stats | grep -i pages ;
free -h , cat /proc/meminfo and page-types -r -b lru
to ensure all pages are freed.
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Shantanu Goel <sgoel01@yahoo.com>
Signed-off-by: Kiran Kumar Modukuri <kiran.modukuri@gmail.com>
[dja: forward ported to current upstream]
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
If cachefiles gets an error other then ENOENT when trying to look up an
object in the cache (in this case, EACCES), the object state machine will
eventually transition to the DROP_OBJECT state.
This state invokes fscache_drop_object() which tries to sync the auxiliary
data with the cache (this is done lazily since commit 402cb8dda949d) on an
incomplete cache object struct.
The problem comes when cachefiles_update_object_xattr() is called to
rewrite the xattr holding the data. There's an assertion there that the
cache object points to a dentry as we're going to update its xattr. The
assertion trips, however, as dentry didn't get set.
Fix the problem by skipping the update in cachefiles if the object doesn't
refer to a dentry. A better way to do it could be to skip the update from
the DROP_OBJECT state handler in fscache, but that might deny the cache the
opportunity to update intermediate state.
If this error occurs, the kernel log includes lines that look like the
following:
CacheFiles: Lookup failed error -13
CacheFiles:
CacheFiles: Assertion failed
------------[ cut here ]------------
kernel BUG at fs/cachefiles/xattr.c:138!
...
Workqueue: fscache_object fscache_object_work_func [fscache]
RIP: 0010:cachefiles_update_object_xattr.cold.4+0x18/0x1a [cachefiles]
...
Call Trace:
cachefiles_update_object+0xdd/0x1c0 [cachefiles]
fscache_update_aux_data+0x23/0x30 [fscache]
fscache_drop_object+0x18e/0x1c0 [fscache]
fscache_object_work_func+0x74/0x2b0 [fscache]
process_one_work+0x18d/0x340
worker_thread+0x2e/0x390
? pwq_unbound_release_workfn+0xd0/0xd0
kthread+0x112/0x130
? kthread_bind+0x30/0x30
ret_from_fork+0x35/0x40
Note that there are actually two issues here: (1) EACCES happened on a
cache object and (2) an oops occurred. I think that the second is a
consequence of the first (it certainly looks like it ought to be). This
patch only deals with the second.
Fixes: 402cb8dda949 ("fscache: Attach the index key and aux data to the cookie")
Reported-by: Zhibin Li <zhibli@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
the victim might've been rmdir'ed just before the lock_rename();
unlike the normal callers, we do not look the source up after the
parents are locked - we know it beforehand and just recheck that it's
still the child of what used to be its parent. Unfortunately,
the check is too weak - we don't spot a dead directory since its
->d_parent is unchanged, dentry is positive, etc. So we sail all
the way to ->rename(), with hosting filesystems _not_ expecting
to be asked renaming an rmdir'ed subdirectory.
The fix is easy, fortunately - the lock on parent is sufficient for
making IS_DEADDIR() on child safe.
Cc: stable@vger.kernel.org
Fixes: 9ae326a69004 (CacheFiles: A cache that backs onto a mounted filesystem)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If we meet a conflicting object that is marked FSCACHE_OBJECT_IS_LIVE in
the active object tree, we have been emitting a BUG after logging
information about it and the new object.
Instead, we should wait for the CACHEFILES_OBJECT_ACTIVE flag to be cleared
on the old object (or return an error). The ACTIVE flag should be cleared
after it has been removed from the active object tree. A timeout of 60s is
used in the wait, so we shouldn't be able to get stuck there.
Fixes: 9ae326a69004 ("CacheFiles: A cache that backs onto a mounted filesystem")
Signed-off-by: Kiran Kumar Modukuri <kiran.modukuri@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
In cachefiles_mark_object_active(), the new object is marked active and
then we try to add it to the active object tree. If a conflicting object
is already present, we want to wait for that to go away. After the wait,
we go round again and try to re-mark the object as being active - but it's
already marked active from the first time we went through and a BUG is
issued.
Fix this by clearing the CACHEFILES_OBJECT_ACTIVE flag before we try again.
Analysis from Kiran Kumar Modukuri:
[Impact]
Oops during heavy NFS + FSCache + Cachefiles
CacheFiles: Error: Overlong wait for old active object to go away.
BUG: unable to handle kernel NULL pointer dereference at 0000000000000002
CacheFiles: Error: Object already active kernel BUG at
fs/cachefiles/namei.c:163!
[Cause]
In a heavily loaded system with big files being read and truncated, an
fscache object for a cookie is being dropped and a new object being
looked. The new object being looked for has to wait for the old object
to go away before the new object is moved to active state.
[Fix]
Clear the flag 'CACHEFILES_OBJECT_ACTIVE' for the new object when
retrying the object lookup.
[Testcase]
Have run ~100 hours of NFS stress tests and have not seen this bug recur.
[Regression Potential]
- Limited to fscache/cachefiles.
Fixes: 9ae326a69004 ("CacheFiles: A cache that backs onto a mounted filesystem")
Signed-off-by: Kiran Kumar Modukuri <kiran.modukuri@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
When a cookie is allocated that causes fscache_object structs to be
allocated, those objects are initialised with the cookie pointer, but
aren't blessed with a ref on that cookie unless the attachment is
successfully completed in fscache_attach_object().
If attachment fails because the parent object was dying or there was a
collision, fscache_attach_object() returns without incrementing the cookie
counter - but upon failure of this function, the object is released which
then puts the cookie, whether or not a ref was taken on the cookie.
Fix this by taking a ref on the cookie when it is assigned in
fscache_object_init(), even when we're creating a root object.
Analysis from Kiran Kumar:
This bug has been seen in 4.4.0-124-generic #148-Ubuntu kernel
BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1776277
fscache cookie ref count updated incorrectly during fscache object
allocation resulting in following Oops.
kernel BUG at /build/linux-Y09MKI/linux-4.4.0/fs/fscache/internal.h:321!
kernel BUG at /build/linux-Y09MKI/linux-4.4.0/fs/fscache/cookie.c:639!
[Cause]
Two threads are trying to do operate on a cookie and two objects.
(1) One thread tries to unmount the filesystem and in process goes over a
huge list of objects marking them dead and deleting the objects.
cookie->usage is also decremented in following path:
nfs_fscache_release_super_cookie
-> __fscache_relinquish_cookie
->__fscache_cookie_put
->BUG_ON(atomic_read(&cookie->usage) <= 0);
(2) A second thread tries to lookup an object for reading data in following
path:
fscache_alloc_object
1) cachefiles_alloc_object
-> fscache_object_init
-> assign cookie, but usage not bumped.
2) fscache_attach_object -> fails in cant_attach_object because the
cookie's backing object or cookie's->parent object are going away
3) fscache_put_object
-> cachefiles_put_object
->fscache_object_destroy
->fscache_cookie_put
->BUG_ON(atomic_read(&cookie->usage) <= 0);
[NOTE from dhowells] It's unclear as to the circumstances in which (2) can
take place, given that thread (1) is in nfs_kill_super(), however a
conflicting NFS mount with slightly different parameters that creates a
different superblock would do it. A backtrace from Kiran seems to show
that this is a possibility:
kernel BUG at/build/linux-Y09MKI/linux-4.4.0/fs/fscache/cookie.c:639!
...
RIP: __fscache_cookie_put+0x3a/0x40 [fscache]
Call Trace:
__fscache_relinquish_cookie+0x87/0x120 [fscache]
nfs_fscache_release_super_cookie+0x2d/0xb0 [nfs]
nfs_kill_super+0x29/0x40 [nfs]
deactivate_locked_super+0x48/0x80
deactivate_super+0x5c/0x60
cleanup_mnt+0x3f/0x90
__cleanup_mnt+0x12/0x20
task_work_run+0x86/0xb0
exit_to_usermode_loop+0xc2/0xd0
syscall_return_slowpath+0x4e/0x60
int_ret_from_sys_call+0x25/0x9f
[Fix] Bump up the cookie usage in fscache_object_init, when it is first
being assigned a cookie atomically such that the cookie is added and bumped
up if its refcount is not zero. Remove the assignment in
fscache_attach_object().
[Testcase]
I have run ~100 hours of NFS stress tests and not seen this bug recur.
[Regression Potential]
- Limited to fscache/cachefiles.
Fixes: ccc4fc3d11e9 ("FS-Cache: Implement the cookie management part of the netfs API")
Signed-off-by: Kiran Kumar Modukuri <kiran.modukuri@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
cachefiles_read_waiter() has the right to access a 'monitor' object by
virtue of being called under the waitqueue lock for one of the pages in its
purview. However, it has no ref on that monitor object or on the
associated operation.
What it is allowed to do is to move the monitor object to the operation's
to_do list, but once it drops the work_lock, it's actually no longer
permitted to access that object. However, it is trying to enqueue the
retrieval operation for processing - but it can only do this via a pointer
in the monitor object, something it shouldn't be doing.
If it doesn't enqueue the operation, the operation may not get processed.
If the order is flipped so that the enqueue is first, then it's possible
for the work processor to look at the to_do list before the monitor is
enqueued upon it.
Fix this by getting a ref on the operation so that we can trust that it
will still be there once we've added the monitor to the to_do list and
dropped the work_lock. The op can then be enqueued after the lock is
dropped.
The bug can manifest in one of a couple of ways. The first manifestation
looks like:
FS-Cache:
FS-Cache: Assertion failed
FS-Cache: 6 == 5 is false
------------[ cut here ]------------
kernel BUG at fs/fscache/operation.c:494!
RIP: 0010:fscache_put_operation+0x1e3/0x1f0
...
fscache_op_work_func+0x26/0x50
process_one_work+0x131/0x290
worker_thread+0x45/0x360
kthread+0xf8/0x130
? create_worker+0x190/0x190
? kthread_cancel_work_sync+0x10/0x10
ret_from_fork+0x1f/0x30
This is due to the operation being in the DEAD state (6) rather than
INITIALISED, COMPLETE or CANCELLED (5) because it's already passed through
fscache_put_operation().
The bug can also manifest like the following:
kernel BUG at fs/fscache/operation.c:69!
...
[exception RIP: fscache_enqueue_operation+246]
...
#7 [ffff883fff083c10] fscache_enqueue_operation at ffffffffa0b793c6
#8 [ffff883fff083c28] cachefiles_read_waiter at ffffffffa0b15a48
#9 [ffff883fff083c48] __wake_up_common at ffffffff810af028
I'm not entirely certain as to which is line 69 in Lei's kernel, so I'm not
entirely clear which assertion failed.
Fixes: 9ae326a69004 ("CacheFiles: A cache that backs onto a mounted filesystem")
Reported-by: Lei Xue <carmark.dlut@gmail.com>
Reported-by: Vegard Nossum <vegard.nossum@gmail.com>
Reported-by: Anthony DeRobertis <aderobertis@metrics.net>
Reported-by: NeilBrown <neilb@suse.com>
Reported-by: Daniel Axtens <dja@axtens.net>
Reported-by: Kiran Kumar Modukuri <kiran.modukuri@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
|
|
Pull procfs updates from Al Viro:
"Christoph's proc_create_... cleanups series"
* 'hch.procfs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (44 commits)
xfs, proc: hide unused xfs procfs helpers
isdn/gigaset: add back gigaset_procinfo assignment
proc: update SIZEOF_PDE_INLINE_NAME for the new pde fields
tty: replace ->proc_fops with ->proc_show
ide: replace ->proc_fops with ->proc_show
ide: remove ide_driver_proc_write
isdn: replace ->proc_fops with ->proc_show
atm: switch to proc_create_seq_private
atm: simplify procfs code
bluetooth: switch to proc_create_seq_data
netfilter/x_tables: switch to proc_create_seq_private
netfilter/xt_hashlimit: switch to proc_create_{seq,single}_data
neigh: switch to proc_create_seq_data
hostap: switch to proc_create_{seq,single}_data
bonding: switch to proc_create_seq_data
rtc/proc: switch to proc_create_single_data
drbd: switch to proc_create_single
resource: switch to proc_create_seq_data
staging/rtl8192u: simplify procfs code
jfs: simplify procfs code
...
|
|
That can (and does, on some filesystems) happen - ->mkdir() (and thus
vfs_mkdir()) can legitimately leave its argument negative and just
unhash it, counting upon the lookup to pick the object we'd created
next time we try to look at that name.
Some vfs_mkdir() callers forget about that possibility...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Variants of proc_create{,_data} that directly take a struct seq_operations
argument and drastically reduces the boilerplate code in the callers.
All trivial callers converted over.
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Pass the object size in to fscache_acquire_cookie() and
fscache_write_page() rather than the netfs providing a callback by which it
can be received. This makes it easier to update the size of the object
when a new page is written that extends the object.
The current object size is also passed by fscache to the check_aux
function, obviating the need to store it in the aux data.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Anna Schumaker <anna.schumaker@netapp.com>
Tested-by: Steve Dickson <steved@redhat.com>
|
|
Attach copies of the index key and auxiliary data to the fscache cookie so
that:
(1) The callbacks to the netfs for this stuff can be eliminated. This
can simplify things in the cache as the information is still
available, even after the cache has relinquished the cookie.
(2) Simplifies the locking requirements of accessing the information as we
don't have to worry about the netfs object going away on us.
(3) The cache can do lazy updating of the coherency information on disk.
As long as the cache is flushed before reboot/poweroff, there's no
need to update the coherency info on disk every time it changes.
(4) Cookies can be hashed or put in a tree as the index key is easily
available. This allows:
(a) Checks for duplicate cookies can be made at the top fscache layer
rather than down in the bowels of the cache backend.
(b) Caching can be added to a netfs object that has a cookie if the
cache is brought online after the netfs object is allocated.
A certain amount of space is made in the cookie for inline copies of the
data, but if it won't fit there, extra memory will be allocated for it.
The downside of this is that live cache operation requires more memory.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Anna Schumaker <anna.schumaker@netapp.com>
Tested-by: Steve Dickson <steved@redhat.com>
|
|
Add some tracepoints to fscache:
(*) fscache_cookie - Tracks a cookie's usage count.
(*) fscache_netfs - Logs registration of a network filesystem, including
the pointer to the cookie allocated.
(*) fscache_acquire - Logs cookie acquisition.
(*) fscache_relinquish - Logs cookie relinquishment.
(*) fscache_enable - Logs enablement of a cookie.
(*) fscache_disable - Logs disablement of a cookie.
(*) fscache_osm - Tracks execution of states in the object state machine.
and cachefiles:
(*) cachefiles_ref - Tracks a cachefiles object's usage count.
(*) cachefiles_lookup - Logs result of lookup_one_len().
(*) cachefiles_mkdir - Logs result of vfs_mkdir().
(*) cachefiles_create - Logs result of vfs_create().
(*) cachefiles_unlink - Logs calls to vfs_unlink().
(*) cachefiles_rename - Logs calls to vfs_rename().
(*) cachefiles_mark_active - Logs an object becoming active.
(*) cachefiles_wait_active - Logs a wait for an old object to be
destroyed.
(*) cachefiles_mark_inactive - Logs an object becoming inactive.
(*) cachefiles_mark_buried - Logs the burial of an object.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Fix a couple of checker warnings in fscache and cachefiles:
(1) fscache_n_op_requeue is never used, so get rid of it.
(2) cachefiles_uncache_page() is passed in a lock that it releases, so
this needs annotating.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:
for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
done
with de-mangling cleanups yet to come.
NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do. But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.
The next patch from Al will sort out the final differences, and we
should be all done.
Scripted-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
As the page free path makes no distinction between cache hot and cold
pages, there is no real useful ordering of pages in the free list that
allocation requests can take advantage of. Juding from the users of
__GFP_COLD, it is likely that a number of them are the result of copying
other sites instead of actually measuring the impact. Remove the
__GFP_COLD parameter which simplifies a number of paths in the page
allocator.
This is potentially controversial but bear in mind that the size of the
per-cpu pagelists versus modern cache sizes means that the whole per-cpu
list can often fit in the L3 cache. Hence, there is only a potential
benefit for microbenchmarks that alloc/free pages in a tight loop. It's
even worse when THP is taken into account which has little or no chance
of getting a cache-hot page as the per-cpu list is bypassed and the
zeroing of multiple pages will thrash the cache anyway.
The truncate microbenchmarks are not shown as this patch affects the
allocation path and not the free path. A page fault microbenchmark was
tested but it showed no sigificant difference which is not surprising
given that the __GFP_COLD branches are a miniscule percentage of the
fault path.
Link: http://lkml.kernel.org/r/20171018075952.10627-9-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Every pagevec_init user claims the pages being released are hot even in
cases where it is unlikely the pages are hot. As no one cares about the
hotness of pages being released to the allocator, just ditch the
parameter.
No performance impact is expected as the overhead is marginal. The
parameter is removed simply because it is a bit stupid to have a useless
parameter copied everywhere.
Link: http://lkml.kernel.org/r/20171018075952.10627-6-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Firstly by applying the following with coccinelle's spatch:
@@ expression SB; @@
-SB->s_flags & MS_RDONLY
+sb_rdonly(SB)
to effect the conversion to sb_rdonly(sb), then by applying:
@@ expression A, SB; @@
(
-(!sb_rdonly(SB)) && A
+!sb_rdonly(SB) && A
|
-A != (sb_rdonly(SB))
+A != sb_rdonly(SB)
|
-A == (sb_rdonly(SB))
+A == sb_rdonly(SB)
|
-!(sb_rdonly(SB))
+!sb_rdonly(SB)
|
-A && (sb_rdonly(SB))
+A && sb_rdonly(SB)
|
-A || (sb_rdonly(SB))
+A || sb_rdonly(SB)
|
-(sb_rdonly(SB)) != A
+sb_rdonly(SB) != A
|
-(sb_rdonly(SB)) == A
+sb_rdonly(SB) == A
|
-(sb_rdonly(SB)) && A
+sb_rdonly(SB) && A
|
-(sb_rdonly(SB)) || A
+sb_rdonly(SB) || A
)
@@ expression A, B, SB; @@
(
-(sb_rdonly(SB)) ? 1 : 0
+sb_rdonly(SB)
|
-(sb_rdonly(SB)) ? A : B
+sb_rdonly(SB) ? A : B
)
to remove left over excess bracketage and finally by applying:
@@ expression A, SB; @@
(
-(A & MS_RDONLY) != sb_rdonly(SB)
+(bool)(A & MS_RDONLY) != sb_rdonly(SB)
|
-(A & MS_RDONLY) == sb_rdonly(SB)
+(bool)(A & MS_RDONLY) == sb_rdonly(SB)
)
to make comparisons against the result of sb_rdonly() (which is a bool)
work correctly.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
So I've noticed a number of instances where it was not obvious from the
code whether ->task_list was for a wait-queue head or a wait-queue entry.
Furthermore, there's a number of wait-queue users where the lists are
not for 'tasks' but other entities (poll tables, etc.), in which case
the 'task_list' name is actively confusing.
To clear this all up, name the wait-queue head and entry list structure
fields unambiguously:
struct wait_queue_head::task_list => ::head
struct wait_queue_entry::task_list => ::entry
For example, this code:
rqw->wait.task_list.next != &wait->task_list
... is was pretty unclear (to me) what it's doing, while now it's written this way:
rqw->wait.head.next != &wait->entry
... which makes it pretty clear that we are iterating a list until we see the head.
Other examples are:
list_for_each_entry_safe(pos, next, &x->task_list, task_list) {
list_for_each_entry(wq, &fence->wait.task_list, task_list) {
... where it's unclear (to me) what we are iterating, and during review it's
hard to tell whether it's trying to walk a wait-queue entry (which would be
a bug), while now it's written as:
list_for_each_entry_safe(pos, next, &x->head, entry) {
list_for_each_entry(wq, &fence->wait.head, entry) {
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The wait_bit*() types and APIs are mixed into wait.h, but they
are a pretty orthogonal extension of wait-queues.
Furthermore, only about 50 kernel files use these APIs, while
over 1000 use the regular wait-queue functionality.
So clean up the main wait.h by moving the wait-bit functionality
out of it, into a separate .h and .c file:
include/linux/wait_bit.h for types and APIs
kernel/sched/wait_bit.c for the implementation
Update all header dependencies.
This reduces the size of wait.h rather significantly, by about 30%.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Rename:
wait_queue_t => wait_queue_entry_t
'wait_queue_t' was always a slight misnomer: its name implies that it's a "queue",
but in reality it's a queue *entry*. The 'real' queue is the wait queue head,
which had to carry the name.
Start sorting this out by renaming it to 'wait_queue_entry_t'.
This also allows the real structure name 'struct __wait_queue' to
lose its double underscore and become 'struct wait_queue_entry',
which is the more canonical nomenclature for such data types.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Add #include <linux/cred.h> dependencies to all .c files rely on sched.h
doing that for them.
Note that even if the count where we need to add extra headers seems high,
it's still a net win, because <linux/sched.h> is included in over
2,200 files ...
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Pull more vfs updates from Al Viro:
">rename2() work from Miklos + current_time() from Deepa"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: Replace current_fs_time() with current_time()
fs: Replace CURRENT_TIME_SEC with current_time() for inode timestamps
fs: Replace CURRENT_TIME with current_time() for inode timestamps
fs: proc: Delete inode time initializations in proc_alloc_inode()
vfs: Add current_time() api
vfs: add note about i_op->rename changes to porting
fs: rename "rename2" i_op to "rename"
vfs: remove unused i_op->rename
fs: make remaining filesystems use .rename2
libfs: support RENAME_NOREPLACE in simple_rename()
fs: support RENAME_NOREPLACE for local filesystems
ncpfs: fix unused variable warning
|
|
Pull vfs xattr updates from Al Viro:
"xattr stuff from Andreas
This completes the switch to xattr_handler ->get()/->set() from
->getxattr/->setxattr/->removexattr"
* 'work.xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: Remove {get,set,remove}xattr inode operations
xattr: Stop calling {get,set,remove}xattr inode operations
vfs: Check for the IOP_XATTR flag in listxattr
xattr: Add __vfs_{get,set,remove}xattr helpers
libfs: Use IOP_XATTR flag for empty directory handling
vfs: Use IOP_XATTR flag for bad-inode handling
vfs: Add IOP_XATTR inode operations flag
vfs: Move xattr_resolve_name to the front of fs/xattr.c
ecryptfs: Switch to generic xattr handlers
sockfs: Get rid of getxattr iop
sockfs: getxattr: Fail with -EOPNOTSUPP for invalid attribute names
kernfs: Switch to generic xattr handlers
hfs: Switch to generic xattr handlers
jffs2: Remove jffs2_{get,set,remove}xattr macros
xattr: Remove unnecessary NULL attribute name check
|
|
Right now, various places in the kernel check for the existence of
getxattr, setxattr, and removexattr inode operations and directly call
those operations. Switch to helper functions and test for the IOP_XATTR
flag instead.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Acked-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
David Howells
Linus Torvalds
Christian Brauner
Matthew Wilcox (Oracle)
Tycho Andersen
Takashi Iwai
Christoph Hellwig
Lei Xue
Mauro Carvalho Chehab
Carlos Maiolino
Thomas Gleixner
Sabyasachi Gupta
Colin Ian King
Arnd Bergmann
Nathan Chancellor
Kiran Kumar Modukuri
Al Viro
Mel Gorman
Greg Kroah-Hartman
Ingo Molnar
Andreas Gruenbacher