aboutsummaryrefslogtreecommitdiffstats
path: root/fs/ceph/mds_client.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-09-16ceph: eliminate session->s_trim_capsJeff Layton1-1/+1
It's only used to keep count of caps being trimmed, but that requires that we hold the session->s_mutex to prevent multiple trimming operations from running concurrently. We can achieve the same effect using an integer on the stack, which allows us to (eventually) not need the s_mutex. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-09-16ceph: allow closing session in restarting/reconnect stateYan, Zheng1-3/+3
CEPH_MDS_SESSION_{RESTARTING,RECONNECTING} are for for mds failover, they are sub-states of CEPH_MDS_SESSION_OPEN. So __close_session() should send close request for session in these two state. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-07-08ceph: add change_attr field to ceph_inode_infoJeff Layton1-0/+1
Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-07-08ceph: add btime field to ceph_inode_infoJeff Layton1-0/+1
Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-07-08ceph: ensure d_name/d_parent stability in ceph_mdsc_lease_send_msg()Yan, Zheng1-1/+0
Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-07-08ceph: carry snapshot creation time with inodesDavid Disseldorp1-0/+1
MDS InodeStat v3 wire structures include a trailing snapshot creation time member. Unmarshall this and retain it for a future vxattr. Signed-off-by: David Disseldorp <ddiss@suse.de> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-05-07ceph: have ceph_mdsc_do_request call ceph_mdsc_submit_requestJeff Layton1-2/+3
Nothing calls ceph_mdsc_submit_request today, but in later patches we'll need to be able to call this separately. Have the helper return an int so we can check the r_err under the mutex, and have the caller just check the error code from the submit. Also move the acquisition of CEPH_CAP_PIN references into the same function. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-05-07ceph: use __getname/__putname in ceph_mdsc_build_pathJeff Layton1-0/+6
Al suggested we get rid of the kmalloc here and just use __getname and __putname to get a full PATH_MAX pathname buffer. Since we build the path in reverse, we continue to return a pointer to the beginning of the string and the length, and add a new helper to free the thing at the end. Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-05-07ceph: make iterate_session_caps a public symbolJeff Layton1-0/+4
Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-05-07ceph: quota: fix quota subdir mountsLuis Henriques1-0/+18
The CephFS kernel client does not enforce quotas set in a directory that isn't visible from the mount point. For example, given the path '/dir1/dir2', if quotas are set in 'dir1' and the filesystem is mounted with mount -t ceph <server>:<port>:/dir1/ /mnt then the client won't be able to access 'dir1' inode, even if 'dir2' belongs to a quota realm that points to it. This patch fixes this issue by simply doing an MDS LOOKUPINO operation for unknown inodes. Any inode reference obtained this way will be added to a list in ceph_mds_client, and will only be released when the filesystem is umounted. Link: https://tracker.ceph.com/issues/38482 Reported-by: Hendrik Peyerl <hpeyerl@plusline.net> Signed-off-by: Luis Henriques <lhenriques@suse.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-05ceph: add mount option to limit caps countYan, Zheng1-0/+3
If number of caps exceed the limit, ceph_trim_dentires() also trim dentries with valid leases. Trimming dentry releases references to associated inode, which may evict inode and release caps. By default, there is no limit for caps count. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-05ceph: periodically trim stale dentriesYan, Zheng1-3/+6
Previous commit make VFS delete stale dentry when last reference is dropped. Lease also can become invalid when corresponding dentry has no reference. This patch make cephfs periodically scan lease list, delete corresponding dentry if lease is invalid. There are two types of lease, dentry lease and dir lease. dentry lease has life time and applies to singe dentry. Dentry lease is added to tail of a list when it's updated, leases at front of the list will expire first. Dir lease is CEPH_CAP_FILE_SHARED on directory inode, it applies to all dentries in the directory. Dentries have dir leases are added to another list. Dentries in the list are periodically checked in a round robin manner. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-05ceph: send cap releases more aggressivelyYan, Zheng1-4/+6
When pending cap releases fill up one message, start a work to send cap release message. (old way is sending cap releases every 5 seconds) Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-05ceph: support getting ceph.dir.pin vxattrYan, Zheng1-0/+1
Link: http://tracker.ceph.com/issues/37576 Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-05ceph: support versioned replyYan, Zheng1-0/+1
In versioned reply, inodestat, dirstat and lease are encoded with version, compat_version and struct_len. Based on a patch from Jos Collin <jcollin@redhat.com>. Link: http://tracker.ceph.com/issues/26936 Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-05ceph: map snapid to anonymous bdev IDYan, Zheng1-0/+13
ceph_getattr() return zero dev ID for head inodes and set dev ID to snapid directly for snaphost inodes. This is not good because userspace utilities may consider device ID of 0 as invalid, snapid may conflict with other device's ID. This patch introduces "snapids to anonymous bdev IDs" map. we create a new mapping when we see a snapid for the first time. we trim unused mapping after it is ilde for 5 minutes. Link: http://tracker.ceph.com/issues/22353 Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-05ceph: split large reconnect into multiple messagesYan, Zheng1-0/+3
Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-05ceph: decode feature bits in session messageYan, Zheng1-1/+2
Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-12-26ceph: update wanted caps after resuming stale sessionYan, Zheng1-7/+9
mds contains an optimization, it does not re-issue stale caps if client does not want any cap. A special case of the optimization is that client wants some caps, but skipped updating 'wanted'. For this case, client needs to update 'wanted' when stale session get renewed. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-08-13ceph: support cephfs' own feature bitsYan, Zheng1-0/+12
Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-08-02ceph: use timespec64 for r_stampArnd Bergmann1-1/+1
The ceph_mds_request stamp still uses the deprecated timespec structure, this converts it over as well. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-04-02ceph: quota: add counter for snaprealms with quotaLuis Henriques1-0/+2
By keeping a counter with the number of snaprealms that have quota set allows to optimize the functions that need to walk throught the realms hierarchy looking for quotas. Thus, if this counter is zero it's safe to assume that there are no realms with quota. Signed-off-by: Luis Henriques <lhenriques@suse.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-04-02ceph: quota: add initial infrastructure to support cephfs quotasLuis Henriques1-0/+2
This patch adds the infrastructure required to support cephfs quotas as it is currently implemented in the ceph fuse client. Cephfs quotas can be set on any directory, and can restrict the number of bytes or the number of files stored beneath that point in the directory hierarchy. Quotas are set using the extended attributes 'ceph.quota.max_files' and 'ceph.quota.max_bytes', and can be removed by setting these attributes to '0'. Link: http://tracker.ceph.com/issues/22372 Signed-off-by: Luis Henriques <lhenriques@suse.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-01-29ceph: try to allocate enough memory for reserved capsZhi Zhang1-0/+3
ceph_reserve_caps() may not reserve enough caps under high memory pressure, but it saved the needed caps number that expected to be reserved. When getting caps, crash would happen due to number mismatch. Now we will try to trim more caps when failing to allocate memory for caps need to be reserved, then try again. If still failing to allocate memory, return -ENOMEM. Signed-off-by: Zhi Zhang <zhang.david2011@gmail.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-19ceph: avoid panic in create_session_open_msg() if utsname() returns NULLYan, Zheng1-0/+3
utsname() can return NULL while process is exiting. Kernel releases file locks during process exits. We send request to mds when releasing file lock. So it's possible that we open mds session while process is exiting. utsname() is called in create_session_open_msg(). Link: http://tracker.ceph.com/issues/21275 Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> [idryomov@gmail.com: drop utsname.h include from mds_client.c] Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-05-04ceph: handle epoch barriers in cap messagesJeff Layton1-2/+5
Have the client store and update the osdc epoch_barrier when a cap message comes in with one. When sending cap messages, send the epoch barrier as well. This allows clients to inform servers that their released caps may not be used until a particular OSD map epoch. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: "Yan, Zheng” <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-05-04ceph: make seeky readdir more efficientYan, Zheng1-1/+2
Current cephfs client uses string to indicate start position of readdir. The string is last entry of previous readdir reply. This approach does not work for seeky readdir because we can not easily convert the new postion to a string. For seeky readdir, mds needs to return dentries from the beginning. Client keeps retrying if the reply does not contain the dentry it wants. In current version of ceph, mds sorts CDentry in its cache in hash order. Client also uses dentry hash to compose dir postion. For seeky readdir, if client passes the hash part of dir postion to mds. mds can avoid replying useless dentries. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-05-04ceph: convert ceph_mds_session.s_ref from atomic_t to refcount_tElena Reshetova1-2/+3
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-02-20ceph: add a new flag to indicate whether parent is lockedJeff Layton1-1/+2
struct ceph_mds_request has an r_locked_dir pointer, which is set to indicate the parent inode and that its i_rwsem is locked. In some critical places, we need to be able to indicate the parent inode to the request handling code, even when its i_rwsem may not be locked. Most of the code that operates on r_locked_dir doesn't require that the i_rwsem be locked. We only really need it to handle manipulation of the dcache. The rest (filling of the inode, updating dentry leases, etc.) already has its own locking. Add a new r_req_flags bit that indicates whether the parent is locked when doing the request, and rename the pointer to "r_parent". For now, all the places that set r_parent also set this flag, but that will change in a later patch. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-02-20ceph: convert bools in ceph_mds_request to a new r_req_flags fieldJeff Layton1-4/+8
Currently, we have a bunch of bool flags in struct ceph_mds_request. We need more flags though, but each bool takes (at least) a byte. Those add up over time. Merge all of the existing bools in this struct into a single unsigned long, and use the set/test/clear_bit macros to manipulate them. These are atomic operations, but that is required here to prevent load/modify/store races. The existing flags are protected by different locks, so we can't rely on them for that purpose. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-10-03ceph: handle CEPH_SESSION_REJECT messageYan, Zheng1-0/+1
Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-28ceph: unify cap flush and snapcap flushYan, Zheng1-1/+0
This patch includes following changes - Assign flush tid to snapcap flush - Remove session's s_cap_snaps_flushing list. Add inode to session's s_cap_flushing list instead. Inode is removed from the list when there is no pending snapcap flush or cap flush. - make __kick_flushing_caps() re-send both snapcap flushes and cap flushes. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-28ceph: use list instead of rbtree to track cap flushesYan, Zheng1-1/+1
We don't have requirement of searching cap flush by TID. In most cases, we just need to know TID of the oldest cap flush. List is ideal for this usage. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-28ceph: mount non-default filesystem by nameYan, Zheng1-2/+5
To mount non-default filesytem, user currently needs to provide mds namespace ID. This is inconvenience. This patch makes user be able to mount filesystem by name. If user wants to mount non-default filesystem. Client first subscribes to fsmap.user. Subscribe to mdsmap.<ID> after getting ID of filesystem. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-28ceph: remove ceph_mdsc_lease_releaseJeff Layton1-4/+0
Nothing calls it. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com>
2016-07-28ceph: rados pool namespace supportYan, Zheng1-0/+3
This patch adds codes that decode pool namespace information in cap message and request reply. Pool namespace is saved in i_layout, it will be passed to libceph when doing read/write. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-28libceph: define new ceph_file_layout structureYan, Zheng1-1/+1
Define new ceph_file_layout structure and rename old ceph_file_layout to ceph_file_layout_legacy. This is preparation for adding namespace to ceph_file_layout structure. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-05-26ceph: using hash value to compose dentry offsetYan, Zheng1-1/+3
If MDS sorts dentries in dirfrag in hash order, we use hash value to compose dentry offset. dentry offset is: (0xff << 52) | ((24 bits hash) << 28) | (the nth entry hash hash collision) This offset is stable across directory fragmentation. This alos means there is no need to reset readdir offset if directory get fragmented in the middle of readdir. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-05-26ceph: record 'offset' for each entry of readdir resultYan, Zheng1-0/+1
This is preparation for using hash value as dentry 'offset' Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-05-26ceph: define 'end/complete' in readdir reply as bit flagsYan, Zheng1-1/+1
Set a flag in readdir request, which indicates that client interprets 'end/complete' as bit flags. So that mds can reply additional flags in readdir reply. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-05-26ceph: define struct for dir entry in readdir replyYan, Zheng1-4/+8
This avoids defining multiple arrays for entries in readdir reply Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-04-04mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macrosKirill A. Shutemov1-1/+1
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-04ceph: initial CEPH_FEATURE_FS_FILE_LAYOUT_V2 supportYan, Zheng1-0/+1
Add support for the format change of MClientReply/MclientCaps. Also add code that denies access to inodes with pool_ns layouts. Signed-off-by: Yan, Zheng <zyan@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com>
2015-11-02ceph: make fsync() wait unsafe requests that created/modified inodeYan, Zheng1-0/+3
If we get a unsafe reply for request that created/modified inode, add the unsafe request to a list in the newly created/modified inode. So we can make fsync() wait these unsafe requests. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-09-08ceph: EIO all operations after forced umountYan, Zheng1-0/+1
This patch makes try_get_cap_refs() and __do_request() check if the file system was forced umount, and return -EIO if it was. This patch also adds a helper function to drops dirty caps and wakes up blocking operation. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-06-25ceph: rework dcache readdirYan, Zheng1-0/+3
Previously our dcache readdir code relies on that child dentries in directory dentry's d_subdir list are sorted by dentry's offset in descending order. When adding dentries to the dcache, if a dentry already exists, our readdir code moves it to head of directory dentry's d_subdir list. This design relies on dcache internals. Al Viro suggests using ncpfs's approach: keeping array of pointers to dentries in page cache of directory inode. the validity of those pointers are presented by directory inode's complete and ordered flags. When a dentry gets pruned, we clear directory inode's complete flag in the d_prune() callback. Before moving a dentry to other directory, we clear the ordered flag for both old and new directory. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-06-25ceph: track pending caps flushing globallyYan, Zheng1-1/+1
So we know TID of the oldest pending caps flushing. Later patch will send this information to MDS, so that MDS can trim its completed caps flush list. Tracking pending caps flushing globally also simplifies syncfs code. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-06-25ceph: track pending caps flushing accuratelyYan, Zheng1-0/+1
Previously we do not trace accurate TID for flushing caps. when MDS failovers, we have no choice but to re-send all flushing caps with a new TID. This can cause problem because MDS can has already flushed some caps and has issued the same caps to other client. The re-sent cap flush has a new TID, which makes MDS unable to detect if it has already processed the cap flush. This patch adds code to track pending caps flushing accurately. When re-sending cap flush is needed, we use its original flush TID. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-06-25libceph: store timeouts in jiffies, verify user inputIlya Dryomov1-1/+1
There are currently three libceph-level timeouts that the user can specify on mount: mount_timeout, osd_idle_ttl and osdkeepalive. All of these are in seconds and no checking is done on user input: negative values are accepted, we multiply them all by HZ which may or may not overflow, arbitrarily large jiffies then get added together, etc. There is also a bug in the way mount_timeout=0 is handled. It's supposed to mean "infinite timeout", but that's not how wait.h APIs treat it and so __ceph_open_session() for example will busy loop without much chance of being interrupted if none of ceph-mons are there. Fix all this by verifying user input, storing timeouts capped by msecs_to_jiffies() in jiffies and using the new ceph_timeout_jiffies() helper for all user-specified waits to handle infinite timeouts correctly. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Alex Elder <elder@linaro.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.