aboutsummaryrefslogtreecommitdiffstats
path: root/fs/ceph/messenger.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2010-05-29ceph: close out mds, osd connections before stopping authSage Weil1-0/+1
The auth module (part of the mon_client) is needed to free any ceph_authorizer(s) used by the mds and osd connections. Flush the msgr workqueue before stopping monc to ensure that the destroy_authorizer auth op is available when those connections are closed out. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-17ceph: all allocation functions should get gfp_maskYehuda Sadeh1-1/+1
This is essential, as for the rados block device we'll need to run in different contexts that would need flags that are other than GFP_NOFS. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-17ceph: save peer feature bits in connection structureSage Weil1-0/+1
These are used for adjusting behavior, such as conditionally encoding a newer message format. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-17ceph: resync headers with userlandSage Weil1-3/+1
Notable changes include pool op defines and types, FLOCK feature bit, and new CMPXATTR osd ops. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-17ceph: clean up connection resetSage Weil1-1/+0
Reset out_keepalive_pending and peer_global_seq, and drop unused var. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-17ceph: simplify ceph_msg_newSage Weil1-3/+1
We only need to pass in front_len. Callers can attach any other payload pieces (middle, data) as they see fit. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-11ceph: preserve seq # on requeued messages after transient transport errorsSage Weil1-0/+1
If the tcp connection drops and we reconnect to reestablish a stateful session (with the mds), we need to resend previously sent (and possibly received) messages with the _same_ seq # so that they can be dropped on the other end if needed. Only assign a new seq once after the message is queued. Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-23ceph: avoid reopening osd connections when address hasn't changedSage Weil1-0/+1
We get a fault callback on _every_ tcp connection fault. Normally, we want to reopen the connection when that happens. If the address we have is bad, however, and connection attempts always result in a connection refused or similar error, explicitly closing and reopening the msgr connection just prevents the messenger's backoff logic from kicking in. The result can be a console full of [ 3974.417106] ceph: osd11 10.3.14.138:6800 connection failed [ 3974.423295] ceph: osd11 10.3.14.138:6800 connection failed [ 3974.429709] ceph: osd11 10.3.14.138:6800 connection failed Instead, if we get a fault, and have outstanding requests, but the osd address hasn't changed and the connection never successfully connected in the first place, do nothing to the osd connection. The messenger layer will back off and retry periodically, because we never connected and thus the lossy bit is not set. Instead, touch each request's r_stamp so that handle_timeout can tell the request is still alive and kicking. Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-01ceph: reset bits on connection closeSage Weil1-1/+0
Clear LOSSYTX bit, so that if/when we reconnect, said reconnect will retry on failure. Clear _PENDING bits too, to avoid polluting subsequent connection state. Drop unused REGISTERED bit. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-10ceph: allow renewal of auth credentialsSage Weil1-0/+1
Add infrastructure to allow the mon_client to periodically renew its auth credentials. Also add a messenger callback that will force such a renewal if a peer rejects our authenticator. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-01-25ceph: keep reserved replies on the request structureYehuda Sadeh1-2/+2
This includes treating all the data preallocation and revokation at the same place, not having to have a special case for the reserved pages. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
2010-01-25ceph: alloc message data pages and check if tid existsYehuda Sadeh1-4/+0
Now doing it in the same callback that is also responsible for allocating the 'front' part of the message. If we get a message that we haven't got a corresponding tid for, mark it for skipping. Moving the mutex unlock/lock from the osd alloc_msg callback to the calling function in the messenger. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
2010-01-25ceph: allocate middle of message before stating to readYehuda Sadeh1-7/+2
Both front and middle parts of the message are now being allocated at the ceph_alloc_msg(). Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
2009-12-23ceph: support ceph_pagelist for message payloadSage Weil1-0/+1
The ceph_pagelist is a simple list of whole pages, strung together via their lru list_head. It facilitates encoding to a "buffer" of unknown size. Allow its use in place of the ceph_msg page vector. This will be used to fix the huge buffer preallocation woes of MDS reconnection. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-23ceph: control access to page vector for incoming dataSage Weil1-0/+2
When we issue an OSD read, we specify a vector of pages that the data is to be read into. The request may be sent multiple times, to multiple OSDs, if the osdmap changes, which means we can get more than one reply. Only read data into the page vector if the reply is coming from the OSD we last sent the request to. Keep track of which connection is using the vector by taking a reference. If another connection was already using the vector before and a new reply comes in on the right connection, revoke the pages from the other connection. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-23ceph: use connection mutex to protect read and write stagesSage Weil1-1/+2
Use a single mutex (previously out_mutex) to protect both read and write activity from concurrent ceph_con_* calls. Drop the mutex when doing callbacks to avoid nested locking (the callback may need to call something like ceph_con_close). Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-21ceph: hex dump corrupt server data to KERN_DEBUGSage Weil1-0/+2
Also, print fsid using standard format, NOT hex dump. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-21ceph: carry explicit msg reference for currently sending messageSage Weil1-0/+1
Carry a ceph_msg reference for connection->out_msg. This will allow us to make out_sent optional. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-07ceph: use kref for ceph_msgSage Weil1-5/+8
Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-18ceph: negotiate authentication protocol; implement AUTH_NONE protocolSage Weil1-0/+10
When we open a monitor session, we send an initial AUTH message listing the auth protocols we support, our entity name, and (possibly) a previously assigned global_id. The monitor chooses a protocol and responds with an initial message. Initially implement AUTH_NONE, a dummy protocol that provides no security, but works within the new framework. It generates 'authorizers' that are used when connecting to (mds, osd) services that simply state our entity name and global_id. This is a wire protocol change. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-18ceph: remove bad calls to ceph_con_shutdownSage Weil1-1/+0
We want to ceph_con_close when we're done with the connection, before the ref count reaches 0. Once it does, do not call ceph_con_shutdown, as that takes the con mutex and may sleep, and besides that is unnecessary. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-10ceph: separate banner and connect during handshake into distinct stagesSage Weil1-2/+2
We need to make sure we only swab the address during the banner once. So break process_banner out of process_connect, and clean up the surrounding code so that these are distinct phases of the handshake. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-03ceph: use fixed endian encoding for ceph_entity_addrSage Weil1-0/+1
We exchange struct ceph_entity_addr over the wire and store it on disk. The sockaddr_storage.ss_family field, however, is host endianness. So, fix ss_family endianness to big endian when sending/receiving over the wire. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06ceph: messenger librarySage Weil1-0/+243
A generic message passing library is used to communicate with all other components in the Ceph file system. The messenger library provides ordered, reliable delivery of messages between two nodes in the system. This implementation is based on TCP. Signed-off-by: Sage Weil <sage@newdream.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.