| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
remove_session_caps() relies on __wait_on_freeing_inode(), to wait for
freeing inode to remove its caps. But VFS wakes freeing inode waiters
before calling destroy_inode().
Cc: stable@vger.kernel.org
Link: https://tracker.ceph.com/issues/40102
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
When creating new file/directory, use security_dentry_init_security() to
prepare selinux context for the new inode, then send openc/mkdir request
to MDS, together with selinux xattr.
security_dentry_init_security() only supports single security module and
only selinux has dentry_init_security hook. So only selinux is supported
for now. We can add support for other security modules once kernel has a
generic version of dentry_init_security()
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Also rename ceph_release_acls_info() to ceph_release_acl_sec_ctx().
And move their definitions to different files. This is preparation
for security label support.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
ceph_d_revalidate(, LOOKUP_RCU) may call __ceph_caps_issued_mask()
on a freeing inode.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
This barrier only applies to the read-modify-write operations; in
particular, it does not apply to the atomic64_set() primitive.
Replace the barrier with an smp_mb().
Fixes: fdd4e15838e59 ("ceph: rework dcache readdir")
Reported-by: "Paul E. McKenney" <paulmck@linux.ibm.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
ceph_listxattr() now calculates the length of vxattrs dynamically, so
these helpers, which incorrectly ignore vxattr.exists_cb(), can be
removed.
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
MDS InodeStat v3 wire structures include a trailing snapshot creation
time member. Unmarshall this and retain it for a future vxattr.
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
This cleanup allows the return value of the functions to be made void,
as no logic should care if these files succeed or not.
Cc: "Yan, Zheng" <zyan@redhat.com>
Cc: Sage Weil <sage@redhat.com>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: ceph-devel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20190612145538.GA18772@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
iput_final() may wait for reahahead pages. The wait can cause deadlock.
For example:
Workqueue: ceph-msgr ceph_con_workfn [libceph]
Call Trace:
schedule+0x36/0x80
io_schedule+0x16/0x40
__lock_page+0x101/0x140
truncate_inode_pages_range+0x556/0x9f0
truncate_inode_pages_final+0x4d/0x60
evict+0x182/0x1a0
iput+0x1d2/0x220
iterate_session_caps+0x82/0x230 [ceph]
dispatch+0x678/0xa80 [ceph]
ceph_con_workfn+0x95b/0x1560 [libceph]
process_one_work+0x14d/0x410
worker_thread+0x4b/0x460
kthread+0x105/0x140
ret_from_fork+0x22/0x40
Workqueue: ceph-msgr ceph_con_workfn [libceph]
Call Trace:
__schedule+0x3d6/0x8b0
schedule+0x36/0x80
schedule_preempt_disabled+0xe/0x10
mutex_lock+0x2f/0x40
ceph_check_caps+0x505/0xa80 [ceph]
ceph_put_wrbuffer_cap_refs+0x1e5/0x2c0 [ceph]
writepages_finish+0x2d3/0x410 [ceph]
__complete_request+0x26/0x60 [libceph]
handle_reply+0x6c8/0xa10 [libceph]
dispatch+0x29a/0xbb0 [libceph]
ceph_con_workfn+0x95b/0x1560 [libceph]
process_one_work+0x14d/0x410
worker_thread+0x4b/0x460
kthread+0x105/0x140
ret_from_fork+0x22/0x40
In above example, truncate_inode_pages_range() waits for readahead pages
while holding s_mutex. ceph_check_caps() waits for s_mutex and blocks
OSD dispatch thread. Later OSD replies (for readahead) can't be handled.
ceph_check_caps() also may lock snap_rwsem for read. So similar deadlock
can happen if iput_final() is called while holding snap_rwsem.
In general, it's not good to call iput_final() inside MDS/OSD dispatch
threads or while holding any mutex.
The fix is introducing ceph_async_iput(), which calls iput_final() in
workqueue.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
We have three workqueue for inode works. Later patch will introduce
one more work for inode. It's not good to introcuce more workqueue
and add more 'struct work_struct' to 'struct ceph_inode_info'.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Pull ceph updates from Ilya Dryomov:
"On the filesystem side we have:
- a fix to enforce quotas set above the mount point (Luis Henriques)
- support for exporting snapshots through NFS (Zheng Yan)
- proper statx implementation (Jeff Layton). statx flags are mapped
to MDS caps, with AT_STATX_{DONT,FORCE}_SYNC taken into account.
- some follow-up dentry name handling fixes, in particular
elimination of our hand-rolled helper and the switch to __getname()
as suggested by Al (Jeff Layton)
- a set of MDS client cleanups in preparation for async MDS requests
in the future (Jeff Layton)
- a fix to sync the filesystem before remounting (Jeff Layton)
On the rbd side, work is on-going on object-map and fast-diff image
features"
* tag 'ceph-for-5.2-rc1' of git://github.com/ceph/ceph-client: (29 commits)
ceph: flush dirty inodes before proceeding with remount
ceph: fix unaligned access in ceph_send_cap_releases
libceph: make ceph_pr_addr take an struct ceph_entity_addr pointer
libceph: fix unaligned accesses in ceph_entity_addr handling
rbd: don't assert on writes to snapshots
rbd: client_mutex is never nested
ceph: print inode number in __caps_issued_mask debugging messages
ceph: just call get_session in __ceph_lookup_mds_session
ceph: simplify arguments and return semantics of try_get_cap_refs
ceph: fix comment over ceph_drop_caps_for_unlink
ceph: move wait for mds request into helper function
ceph: have ceph_mdsc_do_request call ceph_mdsc_submit_request
ceph: after an MDS request, do callback and completions
ceph: use pathlen values returned by set_request_path_attr
ceph: use __getname/__putname in ceph_mdsc_build_path
ceph: use ceph_mdsc_build_path instead of clone_dentry_name
ceph: fix potential use-after-free in ceph_mdsc_build_path
ceph: dump granular cap info in "caps" debugfs file
ceph: make iterate_session_caps a public symbol
ceph: fix NULL pointer deref when debugging is enabled
...
|
|
The CephFS kernel client does not enforce quotas set in a directory that
isn't visible from the mount point. For example, given the path
'/dir1/dir2', if quotas are set in 'dir1' and the filesystem is mounted with
mount -t ceph <server>:<port>:/dir1/ /mnt
then the client won't be able to access 'dir1' inode, even if 'dir2' belongs
to a quota realm that points to it.
This patch fixes this issue by simply doing an MDS LOOKUPINO operation for
unknown inodes. Any inode reference obtained this way will be added to a
list in ceph_mds_client, and will only be released when the filesystem is
umounted.
Link: https://tracker.ceph.com/issues/38482
Reported-by: Hendrik Peyerl <hpeyerl@plusline.net>
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
This function will be used by __fh_to_dentry and by the quotas code, to
find quota realm inodes that are not visible in the mountpoint.
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
a lot of non-delayed work in this case; all of that is left in
->destroy_inode()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
If number of caps exceed the limit, ceph_trim_dentires() also trim
dentries with valid leases. Trimming dentry releases references to
associated inode, which may evict inode and release caps.
By default, there is no limit for caps count.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Previous commit make VFS delete stale dentry when last reference is
dropped. Lease also can become invalid when corresponding dentry has
no reference. This patch make cephfs periodically scan lease list,
delete corresponding dentry if lease is invalid.
There are two types of lease, dentry lease and dir lease. dentry lease
has life time and applies to singe dentry. Dentry lease is added to tail
of a list when it's updated, leases at front of the list will expire
first. Dir lease is CEPH_CAP_FILE_SHARED on directory inode, it applies
to all dentries in the directory. Dentries have dir leases are added to
another list. Dentries in the list are periodically checked in a round
robin manner.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
introduce ceph_d_delete(), which checks if dentry has valid lease.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
When pending cap releases fill up one message, start a work to send
cap release message. (old way is sending cap releases every 5 seconds)
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Link: http://tracker.ceph.com/issues/37576
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
ceph_getattr() return zero dev ID for head inodes and set dev ID to
snapid directly for snaphost inodes. This is not good because userspace
utilities may consider device ID of 0 as invalid, snapid may conflict
with other device's ID.
This patch introduces "snapids to anonymous bdev IDs" map. we create a
new mapping when we see a snapid for the first time. we trim unused
mapping after it is ilde for 5 minutes.
Link: http://tracker.ceph.com/issues/22353
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
totalram_pages and totalhigh_pages are made static inline function.
Main motivation was that managed_page_count_lock handling was complicating
things. It was discussed in length here,
https://lore.kernel.org/patchwork/patch/995739/#1181785 So it seemes
better to remove the lock and convert variables to atomic, with preventing
poteintial store-to-read tearing as a bonus.
[akpm@linux-foundation.org: coding style fixes]
Link: http://lkml.kernel.org/r/1542090790-21750-4-git-send-email-arunks@codeaurora.org
Signed-off-by: Arun KS <arunks@codeaurora.org>
Suggested-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since we found a problem with the 'copy-from' operation after objects have
been truncated, offloading object copies to OSDs should be discouraged
until the issue is fixed.
Thus, this patch adds the 'nocopyfrom' mount option to the default mount
options which effectily means that remote copies won't be done in
copy_file_range unless they are explicitly enabled at mount time.
[ Adjust ceph_show_options() accordingly. ]
Link: https://tracker.ceph.com/issues/37378
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Add a new mount option 'nocopyfrom' that will prevent the usage of the
RADOS 'copy-from' operation in cephfs. This could be useful, for example,
for an administrator to temporarily mitigate any possible bugs in the
'copy-from' implementation.
Currently, only copy_file_range uses this RADOS operation. Setting this
mount option will result in this syscall reverting to the default VFS
implementation, i.e. to perform the copies locally instead of doing remote
object copies.
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
ceph_try_get_caps currently calls try_get_cap_refs with the nonblock
parameter always set to 'true'. This change adds a new parameter that
allows to set it's value. This will be useful for a follow-up patch that
will need to get two sets of capabilities for two different inodes without
risking a deadlock.
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Pull ceph updates from Ilya Dryomov:
"The main things are support for cephx v2 authentication protocol and
basic support for rbd images within namespaces (myself).
Also included are y2038 conversion patches from Arnd, a pile of
miscellaneous fixes from Chengguang and Zheng's feature bit
infrastructure for the filesystem"
* tag 'ceph-for-4.19-rc1' of git://github.com/ceph/ceph-client: (40 commits)
ceph: don't drop message if it contains more data than expected
ceph: support cephfs' own feature bits
crush: fix using plain integer as NULL warning
libceph: remove unnecessary non NULL check for request_key
ceph: refactor error handling code in ceph_reserve_caps()
ceph: refactor ceph_unreserve_caps()
ceph: change to void return type for __do_request()
ceph: compare fsc->max_file_size and inode->i_size for max file size limit
ceph: add additional size check in ceph_setattr()
ceph: add additional offset check in ceph_write_iter()
ceph: add additional range check in ceph_fallocate()
ceph: add new field max_file_size in ceph_fs_client
libceph: weaken sizeof check in ceph_x_verify_authorizer_reply()
libceph: check authorizer reply/challenge length before reading
libceph: implement CEPHX_V2 calculation mode
libceph: add authorizer challenge
libceph: factor out encrypt_authorizer()
libceph: factor out __ceph_x_decrypt()
libceph: factor out __prepare_write_connect()
libceph: store ceph_auth_handshake pointer in ceph_connection
...
|
|
The code of ceph_unreserve_caps() and error handling in
ceph_reserve_caps() are duplicated, so introduce a helper
__ceph_unreserve_caps() to reduce duplicated code.
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
In order to not bother to VFS and other specific filesystems,
we decided to do offset validation inside ceph kernel client,
so just simply set sb->s_maxbytes to MAX_LFS_FILESIZE so that
it can successfully pass VFS check. We add new field max_file_size
in ceph_fs_client to store real file size limit and doing proper
check based on it.
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Since the vfs structures are all using timespec64, we can now
change the internal representation, using ceph_encode_timespec64 and
ceph_decode_timespec64.
In case of ceph_aux_inode however, we need to avoid doing a memcmp()
on uninitialized padding data, so the members of the i_mtime field get
copied individually into 64-bit integers.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
now it can be done...
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
This commit changes statfs default behaviour when reporting usage
statistics. Instead of using the overall filesystem usage, statfs now
reports the quota for the filesystem root, if ceph.quota.max_bytes has
been set for this inode. If quota hasn't been set, it falls back to the
old statfs behaviour.
A new mount option is also added ('noquotadf') to disable this behaviour.
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
By keeping a counter with the number of snaprealms that have quota set
allows to optimize the functions that need to walk throught the realms
hierarchy looking for quotas. Thus, if this counter is zero it's safe to
assume that there are no realms with quota.
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Keep a pointer to the inode in struct ceph_snap_realm. This allows to
optimize functions that walk the realms hierarchy (e.g. in quotas).
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
When we're reaching the ceph.quota.max_bytes limit, i.e., when writing
more than 1/16th of the space left in a quota realm, update the MDS with
the new file size.
This mirrors the fuse-client approach with commit 122c50315ed1 ("client:
Inform mds file size when approaching quota limit"), in the ceph git tree.
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
This patch changes ceph_rename so that -EXDEV is returned if an attempt is
made to mv a file between two different dir trees with different quotas
setup.
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
This patch adds support for the max_files quota. It hooks into all the
ceph functions that add new filesystem objects that need to be checked
against the quota limits. When these limits are hit, -EDQUOT is returned.
Note that we're not checking quotas on ceph_link(). ceph_link doesn't
really create a new inode, and since the MDS doesn't update the directory
statistics when a new (hard) link is created (only with symlinks), they
are not accounted as a new file.
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
This patch adds the infrastructure required to support cephfs quotas as it
is currently implemented in the ceph fuse client. Cephfs quotas can be
set on any directory, and can restrict the number of bytes or the number
of files stored beneath that point in the directory hierarchy.
Quotas are set using the extended attributes 'ceph.quota.max_files' and
'ceph.quota.max_bytes', and can be removed by setting these attributes to
'0'.
Link: http://tracker.ceph.com/issues/22372
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
In current code, regular file and directory use same struct
ceph_file_info to store fs specific data so the struct has to
include some fields which are only used for directory
(e.g., readdir related info), when having plenty of regular files,
it will lead to memory waste.
This patch introduces dedicated ceph_dir_file_info cache for
readdir related thins. So that regular file does not include those
unused fields anymore.
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Client should release unlinked inode from its cache ASAP. But client
can't release inode with dirty caps.
Link: http://tracker.ceph.com/issues/22886
Signed-off-by: Zhi Zhang <zhang.david2011@gmail.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
ceph_reserve_caps() may not reserve enough caps under high memory
pressure, but it saved the needed caps number that expected to
be reserved. When getting caps, crash would happen due to number
mismatch.
Now we will try to trim more caps when failing to allocate memory
for caps need to be reserved, then try again. If still failing to
allocate memory, return -ENOMEM.
Signed-off-by: Zhi Zhang <zhang.david2011@gmail.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Previously ceph_read_iter() uses current->journal to pass context info
to ceph_readpages(), so that ceph_readpages() can distinguish read(2)
from readahead(2)/fadvise(2)/madvise(2). The problem is that page fault
can happen when copying data to userspace memory. Page fault may call
other filesystem's page_mkwrite() if the userspace memory is mapped to a
file. The later filesystem may also want to use current->journal.
The fix is define a on-stack data structure in ceph_read_iter(), add it
to context list in ceph_file_info. ceph_readpages() searches the list,
find if there is a context belongs to current thread.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
It allows accessing i_shared_gen without holding i_ceph_lock. It is
preparation for later patch.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
When session get evicted, all file locks associated with the session
get released remotely by mds. File locks tracked by kernel become
stale. In this situation, set an error flag on inode. The flag makes
further file locks return -EIO.
Another option to handle this situation is cleanup file locks tracked
kernel. I do not choose it because it is inconvenient to notify user
program about the error.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
file locks are tracked by inode's auth mds. dropping auth caps
is equivalent to releasing all file locks.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
Yan, Zheng
Jeff Layton
Andrea Parri
David Disseldorp
Greg Kroah-Hartman
Linus Torvalds
Luis Henriques
Al Viro
Arun KS
Chengguang Xu
Arnd Bergmann
Zhi Zhang