| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add code to implement the core functions to establish a SMB Direct connection.
1. Establish an RDMA connection to SMB server.
2. Negotiate and setup SMB Direct protocol.
3. Implement idle connection timer and credit management.
SMB Direct is enabled by setting CONFIG_CIFS_SMB_DIRECT.
Add to Makefile to enable building SMB Direct.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove the CONFIG_CIFS_SMB2 ifdef and Kconfig option since they
must always be on now.
For various security reasons, SMB3 and later are STRONGLY preferred
over CIFS and older dialects, and SMB3 (and later) will now be
the default dialects so we do not want to allow them to be
ifdeffed out.
In the longer term, we may be able to make older CIFS support
disableable in Kconfig with a new set of #ifdef, but we always
want SMB3 and later support enabled.
Signed-off-by: Steven French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
|
|
Use xattr handlers for resolving attribute names. The amount of setup
code required on cifs is nontrivial, so use the same get and set
functions for all handlers, with switch statements for the different
types of attributes in them.
The set_EA handler can handle NULL values, so we don't need a separate
removexattr function anymore. Remove the cifs_dbg statements related to
xattr name resolution; they don't add much. Don't build xattr.o when
CONFIG_CIFS_XATTR is not defined.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The existing NLS case conversion routines do not appropriately handle
the (now common) case where the local host is using UTF8. This is
because nls_utf8 has no support at all for converting a utf8 string
between cases and the NLS infrastructure in general cannot handle
a multibyte input character.
In any case, what we really need for cifs is to emulate how we expect
the server to convert the character to upper or lowercase. Thus, even
if we had routines that could handle utf8 case conversion, we likely
would end up with the wrong result if the name ends up being in the
upper planes.
This patch adds a new scheme for doing unicode case conversion. The
case conversion tables that Microsoft has published for Windows 8
have been converted to a set of lookup tables, and a routine is
added to convert a wchar_t from lower to uppercase using those
tables.
Reported-and-Tested-by: Jan-Marek Glogowski <glogow@fbihome.de>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
and add negotiate request type to let set_credits know that
we are only on negotiate stage and no need to make a decision
about disabling echos and oplocks.
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
Now we can process SMB2 messages: check message, get message id
and wakeup awaiting routines.
Signed-off-by: Pavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
Add mapping table for 32 bit SMB2 status codes to linux errors.
Note that SMB2 does not use DOS/OS2 errors (ever) so mapping to
DOS/OS2 errors as a common network subset (as we do for cifs)
doesn't help. And note that the set of status codes is much more
complete here.
Signed-off-by: Steve French <sfrench@us.ibm.com>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
As with Linux nfs client, which uses "nfsvers=" or "vers=" to
indicate which protocol to use for mount, specifying
"vers=2.1"
will force an SMB2 mount. When vers is not specified CIFS is used
"vers=1"
We can eventually autonegotiate down from SMB2 to CIFS
when SMB2 is stable enough to make it the default, but this
is for the future. At that time we could also implement a
"maxprotocol" mount option as smbclient and Samba have today,
but that would be premature until SMB2 is stable.
Intially the SMB2 Kconfig option will depend on "BROKEN"
until the merge is complete, and then be "EXPERIMENTAL"
When it is no longer experimental we can consider changing
the default protocol to attempt first.
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
|
|
We need a way to dispatch different operations for different versions.
Behold the smb_version_operations/values structures. For now, those
structures just hold the version enum value and nothing uses them.
Eventually, we'll expand them to cover other operations/values as we
change the callers to dispatch from here.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
|
|
local cifs functions (repost)
Using kernel crypto APIs for DES encryption during LM and NT hash generation
instead of local functions within cifs.
Source file smbdes.c is deleted sans four functions, one of which
uses ecb des functionality provided by kernel crypto APIs.
Remove function SMBOWFencrypt.
Add return codes to various functions such as calc_lanman_hash,
SMBencrypt, and SMBNTencrypt. Includes fix noticed by Dan Carpenter.
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
CC: Dan Carpenter <error27@gmail.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
|
|
Replaced md4 hashing function local to cifs module with kernel crypto APIs.
As a result, md4 hashing function and its supporting functions in
file md4.c are not needed anymore.
Cleaned up function declarations, removed forward function declarations,
and removed a header file that is being deleted from being included.
Verified that sec=ntlm/i, sec=ntlmv2/i, and sec=ntlmssp/i work correctly.
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
|
|
Replace remaining use of md5 hash functions local to cifs module
with kernel crypto APIs.
Remove header and source file containing those local functions.
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
|
|
Some of the code under CONFIG_CIFS_ACL is dependent upon code under
CONFIG_CIFS_EXPERIMENTAL, but the Kconfig options don't reflect that
dependency. Move more of the ACL code out from under
CONFIG_CIFS_EXPERIMENTAL and under CONFIG_CIFS_ACL.
Also move find_readable_file out from other any sort of Kconfig
option and make it a function normally compiled in.
Reported-and-Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
|
|
Define server-level cache index objects (as managed by TCP_ServerInfo structs)
and register then with FS-Cache. Each server object is created in the CIFS
top-level index object and is itself an index into which superblock-level
objects are inserted.
The server objects are now keyed by {IPaddress,family,port} tuple.
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
|
|
Define CIFS for FS-Cache and register for caching. Upon registration the
top-level index object cookie will be stuck to the netfs definition by
FS-Cache.
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
|
|
Remove the hopelessly misguided ->dir_notify(). The only instance (cifs)
has been broken by design from the very beginning; the objects it creates
are never destroyed, keep references to struct file they can outlive, nothing
that could possibly evict them exists on close(2) path *and* no locking
whatsoever is done to prevent races with close(), should the previous, er,
deficiencies someday be dealt with.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Igor Mammedov <niallain@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
|
|
Adds additional option CIFS_DFS_UPCALL to fs/Kconfig for enabling
DFS support. Resolved IP address is saved as a string in the
key payload.
Igor has a series of related patches that will follow which finish up
CIFS DFS support
Acked-by: Igor Mammedov <niallain@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
|
|
Add routines to handle upcalls to userspace via keyctl for the purpose
of getting a SPNEGO blob for a particular uid and server combination.
Clean up the Makefile a bit and set it up to only compile cifs_spnego
if CONFIG_CIFS_UPCALL is set. Also change CONFIG_CIFS_UPCALL to depend
on CONFIG_KEYS rather than CONFIG_CONNECTOR.
cifs_spnego.h defines the communications between kernel and userspace
and is intended to be shared with userspace programs.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
|
|
Signed-off-by: Steve French <sfrench@us.ibm.com>
|
|
For nfsd to work over cifs mounts (which presumably makes sense when trying
to reexport mounts to windows, network appliances or Samba servers to nfs
clients via nfs server).
This is the first stage of that enablement, marked experimental and turned
off by default.
Signed-off-by: Steve French <sfrench@us.ibm.com>
|
|
|
|
The cifs session setup code has three cases, and a fourth for backlevel
LANMAN2 style session setup needed to be added. This new session setup
implmentation will eventually replace the other three and should be
easier to read while fixing a few minor problems (not setting
the LARGE READ/WRITEX flags when NTLMSSP was negotiated for example) and
adding support for NTLMv2 (which will be added with the next patch. In the
meantime, this code is marked in an CONFIG_CIFS_EXPERIMENTAL block and will
not be turned on by default until it is tested against more server types.
Signed-off-by: Steve French <sfrench@us.ibm.com>
|
|
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
|
Long Li
Greg Kroah-Hartman
Steve French
Andreas Gruenbacher
Jeff Layton
Pavel Shilovsky
Pavel Shilovsky
Pavel Shilovsky
Steve French
Shirish Pargaonkar
Suresh Jayaraman
Al Viro
Igor Mammedov
Linus Torvalds