aboutsummaryrefslogtreecommitdiffstats
path: root/fs/cifs/misc.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2013-11-02cifs: Make big endian multiplex ID sequences monotonic on the wireTim Gardner1-4/+6
The multiplex identifier (MID) in the SMB header is only ever used by the client, in conjunction with PID, to match responses from the server. As such, the endianess of the MID is not important. However, When tracing packet sequences on the wire, protocol analyzers such as wireshark display MID as little endian. It is much more informative for the on-the-wire MID sequences to match debug information emitted by the CIFS driver. Therefore, one should write and read MID in the SMB header assuming it is always little endian. Observed from wireshark during the protocol negotiation and session setup: Multiplex ID: 256 Multiplex ID: 256 Multiplex ID: 512 Multiplex ID: 512 Multiplex ID: 768 Multiplex ID: 768 After this patch on-the-wire MID values begin at 1 and increase monotonically. Introduce get_next_mid64() for the internal consumers that use the full 64 bit multiplex identifier. Introduce the helpers get_mid() and compare_mid() to make the endian translation clear. Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Tim Gardner <timg@tpi.com> Signed-off-by: Steve French <smfrench@gmail.com>
2013-10-28cifs: Remove redundant multiplex identifier check from check_smb_hdr()Tim Gardner1-10/+2
The only call site for check_smb_header() assigns 'mid' from the SMB packet, which is then checked again in check_smb_header(). This seems like redundant redundancy. Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Tim Gardner <timg@tpi.com> Signed-off-by: Steve French <smfrench@gmail.com>
2013-09-08CIFS: Replace clientCanCache* bools with an integerPavel Shilovsky1-8/+4
that prepare the code to handle different types of SMB2 leases. Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2013-09-08cifs: Process post session setup code in respective dialect functions.Shirish Pargaonkar1-0/+1
Move the post (successful) session setup code to respective dialect routines. For smb1, session key is per smb connection. For smb2/smb3, session key is per smb session. If client and server do not require signing, free session key for smb1/2/3. If client and server require signing smb1 - Copy (kmemdup) session key for the first session to connection. Free session key of that and subsequent sessions on this connection. smb2 - For every session, keep the session key and free it when the session is being shutdown. smb3 - For every session, generate the smb3 signing key using the session key and then free the session key. There are two unrelated line formatting changes as well. Reviewed-by: Jeff Layton <jlayton@samba.org> Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: Steve French <smfrench@gmail.com>
2013-06-24cifs: track the enablement of signing in the TCP_Server_InfoJeff Layton1-2/+1
Currently, we determine this according to flags in the sec_mode, flags in the global_secflags and via other methods. That makes the semantics very hard to follow and there are corner cases where we don't handle this correctly. Add a new bool to the TCP_Server_Info that acts as a simple flag to tell us whether signing is enabled on this connection or not, and fix up the places that need to determine this to use that flag. This is a bit weird for the SMB2 case, where signing is per-session. SMB2 needs work in this area already though. The existing SMB2 code has similar logic to what we're using here, so there should be no real change in behavior. These changes should make it easier to implement per-session signing in the future though. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <smfrench@gmail.com>
2013-05-04[CIFS] cifs: Rename cERROR and cFYI to cifs_dbgJoe Perches1-41/+37
It's not obvious from reading the macro names that these macros are for debugging. Convert the names to a single more typical kernel style cifs_dbg macro. cERROR(1, ...) -> cifs_dbg(VFS, ...) cFYI(1, ...) -> cifs_dbg(FYI, ...) cFYI(DBG2, ...) -> cifs_dbg(NOISY, ...) Move the terminating format newline from the macro to the call site. Add CONFIG_CIFS_DEBUG function cifs_vfs_err to emit the "CIFS VFS: " prefix for VFS messages. Size is reduced ~ 1% when CONFIG_CIFS_DEBUG is set (default y) $ size fs/cifs/cifs.ko* text data bss dec hex filename 265245 2525 132 267902 4167e fs/cifs/cifs.ko.new 268359 2525 132 271016 422a8 fs/cifs/cifs.ko.old Other miscellaneous changes around these conversions: o Miscellaneous typo fixes o Add terminating \n's to almost all formats and remove them from the macros to be more kernel style like. A few formats previously had defective \n's o Remove unnecessary OOM messages as kmalloc() calls dump_stack o Coalesce formats to make grep easier, added missing spaces when coalescing formats o Use %s, __func__ instead of embedded function name o Removed unnecessary "cifs: " prefixes o Convert kzalloc with multiply to kcalloc o Remove unused cifswarn macro Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2013-02-13cifs: Convert struct cifs_sb_info to use kuids and kgidsEric W. Biederman1-1/+1
Cc: Steve French <smfrench@gmail.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-09-24CIFS: Fix fast lease break after open problemPavel Shilovsky1-0/+30
Now we walk though cifsFileInfo's list for every incoming lease break and look for an equivalent there. That approach misses lease breaks that come just after an open response - we don't have time to populate new cifsFileInfo structure to the list. Fix this by adding new list of pending opens and look for a lease there if we didn't find it in the list of cifsFileInfo structures. Signed-off-by: Pavel Shilovsky <pshilovsky@etersoft.ru> Signed-off-by: Steve French <sfrench@us.ibm.com>
2012-09-24CIFS: Replace netfid with cifs_fid struct in cifsFileInfoPavel Shilovsky1-1/+1
This is help us to extend the code for future protocols that can use another fid mechanism (as SMB2 that has it divided into two parts: persistent and violatile). Also rename variables and refactor the code around the changes. Reviewed-by: Jeff Layton <jlayton@samba.org> Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2012-07-24CIFS: Move clear/print_stats code to ops structPavel Shilovsky1-1/+1
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2012-07-24CIFS: Respect SMB2 header/max header sizePavel Shilovsky1-6/+19
Use SMB2 header size values for allocation and memset because they are bigger and suitable for both CIFS and SMB2. Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <smfrench@gmail.com>
2012-07-24CIFS: Rename Get/FreeXid and make them work with unsigned intPavel Shilovsky1-2/+2
Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2012-06-01CIFS: Move get_next_mid to ops structPavel Shilovsky1-88/+1
Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <sfrench@us.ibm.com>
2012-05-23CIFS: Move add/set_credits and get_credits_field to ops structurePavel Shilovsky1-19/+0
Acked-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <sfrench@us.ibm.com>
2012-05-16cifs: remove legacy MultiuserMount optionJeff Layton1-47/+0
We've now warned about this for two releases. Remove it for 3.5. Signed-off-by: Jeff Layton <jlayton@redhat.com>
2012-03-23cifs: add new cifsiod_wq workqueueJeff Layton1-1/+1
...and convert existing cifs users of system_nrt_wq to use that instead. Also, make it freezable, and set WQ_MEM_RECLAIM since we use it to deal with write reply handling. Signed-off-by: Jeff Layton <jlayton@redhat.com> Acked-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
2012-03-23CIFS: Change mid_q_entry structure fieldsPavel Shilovsky1-1/+1
to be protocol-unspecific and big enough to keep both CIFS and SMB2 values. Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
2012-03-23CIFS: Expand CurrentMid fieldPavel Shilovsky1-38/+46
While in CIFS/SMB we have 16 bit mid, in SMB2 it is 64 bit. Convert the existing field to 64 bit and mask off higher bits for CIFS/SMB. Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
2012-03-23CIFS: Separate protocol-specific code from demultiplex codePavel Shilovsky1-2/+5
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
2012-03-23CIFS: Separate protocol-specific code from transport routinesPavel Shilovsky1-3/+2
that lets us use this functions for SMB2. Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
2012-03-21CIFS: Introduce credit-based flow controlPavel Shilovsky1-0/+19
and send no more than credits value requests at once. For SMB/CIFS it's trivial: increment this value by receiving any message and decrement by sending one. Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-10-12cifs: Add mount options for backup intent (try #6)Shirish Pargaonkar1-0/+15
Add mount options backupuid and backugid. It allows an authenticated user to access files with the intent to back them up including their ACLs, who may not have access permission but has "Backup files and directories user right" on them (by virtue of being part of the built-in group Backup Operators. When mount options backupuid is specified, cifs client restricts the use of backup intents to the user whose effective user id is specified along with the mount option. When mount options backupgid is specified, cifs client restricts the use of backup intents to the users whose effective user id belongs to the group id specified along with the mount option. If an authenticated user is not part of the built-in group Backup Operators at the server, access to such files is denied, even if allowed by the client. Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2011-10-12cifs: clean up checkSMBJeff Layton1-26/+25
The variable names in this function are so ambiguous that it's very difficult to know what it's doing. Rename them to make it a bit more clear. Also, remove a redundant length check. cifsd checks to make sure that the rfclen isn't larger than the maximum frame size when it does the receive. Finally, change checkSMB to return a real error code (-EIO) when it finds an error. That will help simplify some coming changes in the callers. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2011-07-31cifs: simplify refcounting for oplock breaksJeff Layton1-9/+2
Currently, we take a sb->s_active reference and a cifsFileInfo reference when an oplock break workqueue job is queued. This is unnecessary and more complicated than it needs to be. Also as Al points out, deactivate_super has non-trivial locking implications so it's best to avoid that if we can. Instead, just cancel any pending oplock breaks for this filehandle synchronously in cifsFileInfo_put after taking it off the lists. That should ensure that this job doesn't outlive the structures it depends on. Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-05-27[CIFS] Rename three structures to avoid camel caseSteve French1-16/+16
secMode to sec_mode and cifsTconInfo to cifs_tcon and cifsSesInfo to cifs_ses Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-05-19cifs: keep BCC in little-endian formatJeff Layton1-2/+2
This is the same patch as originally posted, just with some merge conflicts fixed up... Currently, the ByteCount is usually converted to host-endian on receive. This is confusing however, as we need to keep two sets of routines for accessing it, and keep track of when to use each routine. Munging received packets like this also limits when the signature can be calulated. Simplify the code by keeping the received ByteCount in little-endian format. This allows us to eliminate a set of routines for accessing it and we can now drop the *_le suffixes from the accessor functions since that's now implied. While we're at it, switch all of the places that read the ByteCount directly to use the get_bcc inline which should also clean up some unaligned accesses. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-05-19consistently use smb_buf_length as be32 for cifs (try 3)Steve French1-5/+3
There is one big endian field in the cifs protocol, the RFC1001 length, which cifs code (unlike in the smb2 code) had been handling as u32 until the last possible moment, when it was converted to be32 (its native form) before sending on the wire. To remove the last sparse endian warning, and to make this consistent with the smb2 implementation (which always treats the fields in their native size and endianness), convert all uses of smb_buf_length to be32. This version incorporates Christoph's comment about using be32_add_cpu, and fixes a typo in the second version of the patch. Signed-off-by: Steve French <sfrench@us.ibm.com> Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-04-12cifs: fix broken BCC check in is_valid_oplock_breakJeff Layton1-1/+1
The BCC is still __le16 at this point, and in any case we need to use the get_bcc_le macro to make sure we don't hit alignment problems. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-04-12Allow user names longer than 32 bytesSteve French1-0/+1
We artificially limited the user name to 32 bytes, but modern servers handle larger. Set the maximum length to a reasonable 256, and make the user name string dynamically allocated rather than a fixed size in session structure. Also clean up old checkpatch warning. Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-31cifs: fix length checks in checkSMBJeff Layton1-16/+17
The cERROR message in checkSMB when the calculated length doesn't match the RFC1001 length is incorrect in many cases. It always says that the RFC1001 length is bigger than the SMB, even when it's actually the reverse. Fix the error message to say the reverse of what it does now when the SMB length goes beyond the end of the received data. Also, clarify the error message when the RFC length is too big. Finally, clarify the comments to show that the 512 byte limit on extra data at the end of the packet is arbitrary. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-31cifs: force a reconnect if there are too many MIDs in flightJeff Layton1-13/+24
Currently, we allow the pending_mid_q to grow without bound with SIGKILL'ed processes. This could eventually be a DoS'able problem. An unprivileged user could a process that does a long-running call and then SIGKILL it. If he can also intercept the NT_CANCEL calls or the replies from the server, then the pending_mid_q could grow very large, possibly even to 2^16 entries which might leave GetNextMid in an infinite loop. Fix this by imposing a hard limit of 32k calls per server. If we cross that limit, set the tcpStatus to CifsNeedReconnect to force cifsd to eventually reconnect the socket and clean out the pending_mid_q. While we're at it, clean up the function a bit and eliminate an unnecessary NULL pointer check. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-31cifs: simplify SMB header check routineJeff Layton1-22/+24
...just cleanup. There should be no behavior change. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Pavel Shilovsky <piastryyy@gmail.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-20cifs: fix unaligned accesses in cifsConvertToUCSJeff Layton1-71/+0
Move cifsConvertToUCS to cifs_unicode.c where all of the other unicode related functions live. Have it store mapped characters in 'temp' and then use put_unaligned_le16 to copy it to the target buffer. Also fix the comments to match kernel coding style. Signed-off-by: Jeff Layton <jlayton@redhat.com> Acked-by: Pavel Shilovsky <piastryyy@gmail.com> Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-19CIFS: Fix oplock break handling (try #2)Pavel Shilovsky1-1/+1
When we get oplock break notification we should set the appropriate value of OplockLevel field in oplock break acknowledge according to the oplock level held by the client in this time. As we only can have level II oplock or no oplock in the case of oplock break, we should be aware only about clientCanCacheRead field in cifsInodeInfo structure. Also fix bug connected with wrong interpretation of OplockLevel field during oplock break notification processing. Signed-off-by: Pavel Shilovsky <piastryyy@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-11-05cifs: make cifs_set_oplock_level() take a cifsInodeInfo pointerPavel Shilovsky1-7/+9
All the callers already have a pointer to struct cifsInodeInfo. Use it. Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de> Signed-off-by: Pavel Shilovsky <piastryyy@gmail.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-11-02CIFS: Add cifs_set_oplock_levelPavel Shilovsky1-3/+20
Simplify many places when we need to set oplock level on an inode. Signed-off-by: Pavel Shilovsky <piastryyy@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-10-25cifs: update comments - [s/GlobalSMBSesLock/cifs_file_list_lock/g]Suresh Jayaraman1-1/+1
GlobalSMBSesLock is now cifs_file_list_lock. Update comments to reflect this. Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de> Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-10-21[CIFS] move close processing from cifs_close to cifsFileInfo_putSteve French1-10/+0
Now that it's feasible for a cifsFileInfo to outlive the filp under which it was created, move the close processing into cifsFileInfo_put. This means that the last user of the filehandle always does the actual on the wire close call. This also allows us to get rid of the closePend flag from cifsFileInfo. If we have an active reference to the file then it's never going to have a close pending. cifs_close is converted to simply put the filehandle. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de> Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-10-21cifs: convert cifs_tcp_ses_lock from a rwlock to a spinlockSuresh Jayaraman1-7/+7
cifs_tcp_ses_lock is a rwlock with protects the cifs_tcp_ses_list, server->smb_ses_list and the ses->tcon_list. It also protects a few ref counters in server, ses and tcon. In most cases the critical section doesn't seem to be large, in a few cases where it is slightly large, there seem to be really no benefit from concurrent access. I briefly considered RCU mechanism but it appears to me that there is no real need. Replace it with a spinlock and get rid of the last rwlock in the cifs code. Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de> Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-10-18cifs: convert GlobalSMBSeslock from a rwlock to regular spinlockJeff Layton1-4/+4
Convert this lock to a regular spinlock A rwlock_t offers little value here. It's more expensive than a regular spinlock unless you have a fairly large section of code that runs under the read lock and can benefit from the concurrency. Additionally, we need to ensure that the refcounting for files isn't racy and to do that we need to lock areas that can increment it for write. That means that the areas that can actually use a read_lock are very few and relatively infrequently used. While we're at it, change the name to something easier to type, and fix a bug in find_writable_file. cifsFileInfo_put can sleep and shouldn't be called while holding the lock. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de> Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-10-12cifs: keep dentry reference in cifsFileInfo instead of inode referenceJeff Layton1-1/+1
cifsFileInfo is a bit problematic. It contains a reference back to the struct file itself. This makes it difficult for a cifsFileInfo to exist without a corresponding struct file. It would be better instead of the cifsFileInfo just held info pertaining to the open file on the server instead without any back refrences to the struct file. This would allow it to exist after the filp to which it was originally attached was closed. Much of the use of the file pointer in this struct is to get at the dentry. Begin divorcing the cifsFileInfo from the struct file by keeping a reference to the dentry. Since the dentry will have a reference to the inode, we can eliminate the "pInode" field too and convert the igrab/iput to dget/dput. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de> Acked-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-09-29cifs: add cifs_sb_master_tcon and convert some callers to use itJeff Layton1-1/+1
At mount time, we'll always need to create a tcon that will serve as a template for others that are associated with the mount. This tcon is known as the "master" tcon. In some cases, we'll need to use that tcon regardless of who's accessing the mount. Add an accessor function for the master tcon and go ahead and switch the appropriate places to use it. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-09-29cifs: add function to get a tcon from cifs_sbJeff Layton1-1/+1
When we convert cifs to do multiple sessions per mount, we'll need more than one tcon per superblock. At that point "cifs_sb->tcon" will make no sense. Add a new accessor function that gets a tcon given a cifs_sb. For now, it just returns cifs_sb->tcon. Later it'll do more. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-07-22cifs: use workqueue instead of slow-workTejun Heo1-8/+12
Workqueue can now handle high concurrency. Use system_nrt_wq instead of slow-work. * Updated is_valid_oplock_break() to not call cifs_oplock_break_put() as advised by Steve French. It might cause deadlock. Instead, reference is increased after queueing succeeded and cifs_oplock_break() briefly grabs GlobalSMBSeslock before putting the cfile to make sure it doesn't put before the matching get is finished. * Anton Blanchard reported that cifs conversion was using now gone system_single_wq. Use system_nrt_wq which provides non-reentrance guarantee which is enough and much better. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Steve French <sfrench@samba.org> Cc: Anton Blanchard <anton@samba.org>
2010-04-21[CIFS] Neaten cERROR and cFYI macros, reduce text spaceJoe Perches1-41/+40
Neaten cERROR and cFYI macros, reduce text space ~2.5K Convert '__FILE__ ": " fmt' to '"%s: " fmt', __FILE__' to save text space Surround macros with do {} while Add parentheses to macros Make statement expression macro from macro with assign Remove now unnecessary parentheses from cFYI and cERROR uses defconfig with CIFS support old $ size fs/cifs/built-in.o text data bss dec hex filename 156012 1760 148 157920 268e0 fs/cifs/built-in.o defconfig with CIFS support old $ size fs/cifs/built-in.o text data bss dec hex filename 153508 1760 148 155416 25f18 fs/cifs/built-in.o allyesconfig old: $ size fs/cifs/built-in.o text data bss dec hex filename 309138 3864 74824 387826 5eaf2 fs/cifs/built-in.o allyesconfig new $ size fs/cifs/built-in.o text data bss dec hex filename 305655 3864 74824 384343 5dd57 fs/cifs/built-in.o Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-02-25[CIFS] pSesInfo->sesSem is used as mutex. Rename it to session_mutex andSteve French1-1/+1
convert it to a real mutex. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-11-16cifs: clear server inode number flag while autodisablingSuresh Jayaraman1-1/+1
Fix the commit ec06aedd44 that intended to turn off querying for server inode numbers when server doesn't consistently support inode numbers. Presumably the commit didn't actually clear the CIFS_MOUNT_SERVER_INUM flag, perhaps a typo. Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de> Acked-by: Jeff Layton <jlayton@redhat.com> Cc: Stable <stable@kernel.org> Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-11-06cifs: clean up handling when server doesn't consistently support inode numbersJeff Layton1-0/+14
It's possible that a server will return a valid FileID when we query the FILE_INTERNAL_INFO for the root inode, but then zeroed out inode numbers when we do a FindFile with an infolevel of SMB_FIND_FILE_ID_FULL_DIR_INFO. In this situation turn off querying for server inode numbers, generate a warning for the user and just generate an inode number using iunique. Once we generate any inode number with iunique we can no longer use any server inode numbers or we risk collisions, so ensure that we don't do that in cifs_get_inode_info either. Cc: Stable <stable@kernel.org> Reported-by: Timothy Normand Miller <theosib@gmail.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-09-24cifs: convert oplock breaks to use slow_work facility (try #4)Jeff Layton1-9/+20
This is the fourth respin of the patch to convert oplock breaks to use the slow_work facility. A customer of ours was testing a backport of one of the earlier patchsets, and hit a "Busy inodes after umount..." problem. An oplock break job had raced with a umount, and the superblock got torn down and its memory reused. When the oplock break job tried to dereference the inode->i_sb, the kernel oopsed. This patchset has the oplock break job hold an inode and vfsmount reference until the oplock break completes. With this, there should be no need to take a tcon reference (the vfsmount implicitly holds one already). Currently, when an oplock break comes in there's a chance that the oplock break job won't occur if the allocation of the oplock_q_entry fails. There are also some rather nasty races in the allocation and handling these structs. Rather than allocating oplock queue entries when an oplock break comes in, add a few extra fields to the cifsFileInfo struct. Get rid of the dedicated cifs_oplock_thread as well and queue the oplock break job to the slow_work thread pool. This approach also has the advantage that the oplock break jobs can potentially run in parallel rather than be serialized like they are today. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-09-15cifs: take read lock on GlobalSMBSes_lock in is_valid_oplock_breakJeff Layton1-3/+3
...rather than a write lock. It doesn't change the list so a read lock should be sufficient. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.