aboutsummaryrefslogtreecommitdiffstats
path: root/fs/cifs/smb1ops.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-10-20CIFS: avoid using MID 0xFFFFRoberto Bergantinos Corpas1-0/+3
According to MS-CIFS specification MID 0xFFFF should not be used by the CIFS client, but we actually do. Besides, this has proven to cause races leading to oops between SendReceive2/cifs_demultiplex_thread. On SMB1, MID is a 2 byte value easy to reach in CurrentMid which may conflict with an oplock break notification request coming from server Signed-off-by: Roberto Bergantinos Corpas <rbergant@redhat.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com> CC: Stable <stable@vger.kernel.org>
2019-07-07cifs: simplify code by removing CONFIG_CIFS_ACL ifdefSteve French1-2/+0
SMB3 ACL support is needed for many use cases now and should not be ifdeffed out, even for SMB1 (CIFS). Remove the CONFIG_CIFS_ACL ifdef so ACL support is always built into cifs.ko Signed-off-by: Steve French <stfrench@microsoft.com>
2019-07-07Fix match_server check to allow for auto dialect negotiateSteve French1-0/+1
When using multidialect negotiate (default or specifying vers=3.0 which allows any smb3 dialect), fix how we check for an existing server session. Before this fix if you mounted a second time to the same server (e.g. a different share on the same server) we would only reuse the existing smb session if a single dialect were requested (e.g. specifying vers=2.1 or vers=3.0 or vers=3.1.1 on the mount command). If a default mount (e.g. not specifying vers=) is done then would always create a new socket connection and SMB3 (or SMB3.1.1) session each time we connect to a different share on the same server rather than reusing the existing one. Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 231Thomas Gleixner1-13/+1
Based on 1 normalized pattern(s): this library is free software you can redistribute it and or modify it under the terms of the gnu general public license v2 as published by the free software foundation this library is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu lesser general public license for more details you should have received a copy of the gnu lesser general public license along with this library if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 2 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204653.539286961@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-07SMB3: Clean up query symlink when reparse pointRonnie Sahlberg1-2/+7
Two of the common symlink formats use reparse points (unlike mfsymlinks and also unlike the SMB1 posix extensions). This is the first part of the fixes to allow these reparse points (NFS style and Windows symlinks) to be resolved properly as symlinks by the client. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-03-14CIFS: make mknod() an smb_version_opAurelien Aptel1-0/+126
This cleanup removes cifs specific code from SMB2/SMB3 code paths which is cleaner and easier to maintain as the code to handle special files is improved. Below is an example creating special files using 'sfu' mount option over SMB3 to Windows (with this patch) (Note that to Samba server, support for saving dos attributes has to be enabled for the SFU mount option to work). In the future this will also make implementation of creating special files as reparse points easier (as Windows NFS server does for example). root@smf-Thinkpad-P51:~# stat -c "%F" /mnt2/char character special file root@smf-Thinkpad-P51:~# stat -c "%F" /mnt2/block block special file Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2019-03-05cifs: use correct format charactersLouis Taylor1-1/+1
When compiling with -Wformat, clang emits the following warnings: fs/cifs/smb1ops.c:312:20: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] tgt_total_cnt, total_in_tgt); ^~~~~~~~~~~~ fs/cifs/cifs_dfs_ref.c:289:4: warning: format specifies type 'short' but the argument has type 'int' [-Wformat] ref->flags, ref->server_type); ^~~~~~~~~~ fs/cifs/cifs_dfs_ref.c:289:16: warning: format specifies type 'short' but the argument has type 'int' [-Wformat] ref->flags, ref->server_type); ^~~~~~~~~~~~~~~~ fs/cifs/cifs_dfs_ref.c:291:4: warning: format specifies type 'short' but the argument has type 'int' [-Wformat] ref->ref_flag, ref->path_consumed); ^~~~~~~~~~~~~ fs/cifs/cifs_dfs_ref.c:291:19: warning: format specifies type 'short' but the argument has type 'int' [-Wformat] ref->ref_flag, ref->path_consumed); ^~~~~~~~~~~~~~~~~~ The types of these arguments are unconditionally defined, so this patch updates the format character to the correct ones for ints and unsigned ints. Link: https://github.com/ClangBuiltLinux/linux/issues/378 Signed-off-by: Louis Taylor <louis@kragniz.eu> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
2019-03-05CIFS: Respect reconnect in MTU credits calculationsPavel Shilovsky1-3/+3
Every time after a session reconnect we don't need to account for credits obtained in previous sessions. Introduce new struct cifs_credits which contains both credits value and reconnect instance of the time those credits were taken. Modify a routine that add credits back to handle the reconnect instance by assuming zero credits if the reconnect happened after the credits were obtained and before we decided to add them back due to some errors during sending. This patch fixes the MTU credits cases. The subsequent patch will handle non-MTU ones. Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-12-28cifs: Make use of DFS cache to get new DFS referralsPaulo Alcantara1-8/+7
This patch will make use of DFS cache routines where appropriate and do not always request a new referral from server. Signed-off-by: Paulo Alcantara <palcantara@suse.de> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-08-07cifs: simple stats should always be enabledSteve French1-4/+0
CONFIG_CIFS_STATS should always be enabled as Pavel recently noted. Simple statistics are not a significant performance hit, and removing the ifdef simplifies the code slightly. Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2018-07-05cifs: Fix use after free of a mid_q_entryLars Persson1-0/+1
With protocol version 2.0 mounts we have seen crashes with corrupt mid entries. Either the server->pending_mid_q list becomes corrupt with a cyclic reference in one element or a mid object fetched by the demultiplexer thread becomes overwritten during use. Code review identified a race between the demultiplexer thread and the request issuing thread. The demultiplexer thread seems to be written with the assumption that it is the sole user of the mid object until it calls the mid callback which either wakes the issuer task or deletes the mid. This assumption is not true because the issuer task can be woken up earlier by a signal. If the demultiplexer thread has proceeded as far as setting the mid_state to MID_RESPONSE_RECEIVED then the issuer thread will happily end up calling cifs_delete_mid while the demultiplexer thread still is using the mid object. Inserting a delay in the cifs demultiplexer thread widens the race window and makes reproduction of the race very easy: if (server->large_buf) buf = server->bigbuf; + usleep_range(500, 4000); server->lstrp = jiffies; To resolve this I think the proper solution involves putting a reference count on the mid object. This patch makes sure that the demultiplexer thread holds a reference until it has finished processing the transaction. Cc: stable@vger.kernel.org Signed-off-by: Lars Persson <larper@axis.com> Acked-by: Paulo Alcantara <palcantara@suse.de> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-04-02cifs: add server->vals->header_preamble_sizeRonnie Sahlberg1-0/+1
This variable is set to 4 for all protocol versions and replaces the hardcoded constant 4 throughought the code. This will later be updated to reflect whether a response packet has a 4 byte length preamble or not once we start removing this field from the SMB2+ dialects. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2018-01-24CIFS: SMBD: Read correct returned data length for RDMA write (SMB read) I/OLong Li1-1/+3
This patch is for preparing upper layer doing SMB read via RDMA write. When RDMA write is used for SMB read, the returned data length is in DataRemaining in the response packet. Reading it properly by adding a parameter to specifiy where the returned data length is. Add the defition for memory registration to wdata and return the correct length based on if RDMA write is used. Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2017-06-20CIFS: Improve readdir verbosityPavel Shilovsky1-2/+7
Downgrade the loglevel for SMB2 to prevent filling the log with messages if e.g. readdir was interrupted. Also make SMB2 and SMB1 codepaths do the same logging during readdir. Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <smfrench@gmail.com> CC: Stable <stable@vger.kernel.org>
2017-04-17cifs: Do not send echoes before Negotiate is completeSachin Prabhu1-0/+10
commit 4fcd1813e640 ("Fix reconnect to not defer smb3 session reconnect long after socket reconnect") added support for Negotiate requests to be initiated by echo calls. To avoid delays in calling echo after a reconnect, I added the patch introduced by the commit b8c600120fc8 ("Call echo service immediately after socket reconnect"). This has however caused a regression with cifs shares which do not have support for echo calls to trigger Negotiate requests. On connections which need to call Negotiation, the echo calls trigger an error which triggers a reconnect which in turn triggers another echo call. This results in a loop which is only broken when an operation is performed on the cifs share. For an idle share, it can DOS a server. The patch uses the smb_operation can_echo() for cifs so that it is called only if connection has been already been setup. kernel bz: 194531 Signed-off-by: Sachin Prabhu <sprabhu@redhat.com> Tested-by: Jonathan Liu <net147@gmail.com> Acked-by: Pavel Shilovsky <pshilov@microsoft.com> CC: Stable <stable@vger.kernel.org> Signed-off-by: Steve French <smfrench@gmail.com>
2017-03-02smb2: Enforce sec= mount optionSachin Prabhu1-0/+1
If the security type specified using a mount option is not supported, the SMB2 session setup code changes the security type to RawNTLMSSP. We should instead fail the mount and return an error. The patch changes the code for SMB2 to make it similar to the code used for SMB1. Like in SMB1, we now use the global security flags to select the security method to be used when no security method is specified and to return an error when the requested auth method is not available. For SMB2, we also use ntlmv2 as a synonym for nltmssp. Signed-off-by: Sachin Prabhu <sprabhu@redhat.com> Acked-by: Pavel Shilovsky <pshilov@microsoft.com> Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2017-02-01CIFS: Make send_cancel take rqst as argumentPavel Shilovsky1-2/+2
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
2015-05-10Fix that several functions handle incorrect value of mapcharsNakajima Akira1-1/+2
Cifs client has problem with reserved chars filename. [BUG1] : several functions handle incorrect value of mapchars - cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR); + cifs_remap(cifs_sb)); [BUG2] : forget to convert reserved chars when creating SymbolicLink. - CIFSUnixCreateSymLink() calls cifs_strtoUTF16 + CIFSUnixCreateSymLink() calls cifsConvertToUTF16() with remap [BUG3] : forget to convert reserved chars when getting SymbolicLink. - CIFSSMBUnixQuerySymLink() calls cifs_strtoUTF16 + CIFSSMBUnixQuerySymLink() calls cifsConvertToUTF16() with remap [BUG4] : /proc/mounts don't show "mapposix" when using mapposix mount option + cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SFM_CHR) + seq_puts(s, ",mapposix"); Reported-by: t.wede@kw-reneg.de Reported-by: Nakajima Akira <nakajima.akira@nttcom.co.jp> Signed-off-by: Nakajima Akira <nakajima.akira@nttcom.co.jp> Signed-off-by: Carl Schaefer <schaefer@trilug.org> Signed-off-by: Steve French <smfrench@gmail.com>
2015-04-15VFS: normal filesystems (and lustre): d_inode() annotationsDavid Howells1-1/+1
that's the bulk of filesystem drivers dealing with inodes of their own Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-10-16Remap reserved posix characters by default (part 3/3)Steve French1-16/+9
This is a bigger patch, but its size is mostly due to a single change for how we check for remapping illegal characters in file names - a lot of repeated, small changes to the way callers request converting file names. The final patch in the series does the following: 1) changes default behavior for cifs to be more intuitive. Currently we do not map by default to seven reserved characters, ie those valid in POSIX but not in NTFS/CIFS/SMB3/Windows, unless a mount option (mapchars) is specified. Change this to by default always map and map using the SFM maping (like the Mac uses) unless the server negotiates the CIFS Unix Extensions (like Samba does when mounting with the cifs protocol) when the remapping of the characters is unnecessary. This should help SMB3 mounts in particular since Samba will likely be able to implement this mapping with its new "vfs_fruit" module as it will be doing for the Mac. 2) if the user specifies the existing "mapchars" mount option then use the "SFU" (Microsoft Services for Unix, SUA) style mapping of the seven characters instead. 3) if the user specifies "nomapposix" then disable SFM/MAC style mapping (so no character remapping would be used unless the user specifies "mapchars" on mount as well, as above). 4) change all the places in the code that check for the superblock flag on the mount which is set by mapchars and passed in on all path based operation and change it to use a small function call instead to set the mapping type properly (and check for the mapping type in the cifs unicode functions) Signed-off-by: Steve French <smfrench@gmail.com>
2014-10-16Allow mknod and mkfifo on SMB2/SMB3 mountsSteve French1-4/+4
The "sfu" mount option did not work on SMB2/SMB3 mounts. With these changes when the "sfu" mount option is passed in on an smb2/smb2.1/smb3 mount the client can emulate (and recognize) fifo and device (character and device files). In addition the "sfu" mount option should not conflict with "mfsymlinks" (symlink emulation) as we will never create "sfu" style symlinks, but using "sfu" mount option will allow us to recognize existing symlinks, created with Microsoft "Services for Unix" (SFU and SUA). To enable the "sfu" mount option for SMB2/SMB3 the calling syntax of the generic cifs/smb2/smb3 sync_read and sync_write protocol dependent function needed to be changed (we don't have a file struct in all cases), but this actually ended up simplifying the code a little. Signed-off-by: Steve French <smfrench@gmail.com>
2014-10-02Fix problem recognizing symlinksSteve French1-1/+1
Changeset eb85d94bd introduced a problem where if a cifs open fails during query info of a file we will still try to close the file (happens with certain types of reparse points) even though the file handle is not valid. In addition for SMB2/SMB3 we were not mapping the return code returned by Windows when trying to open a file (like a Windows NFS symlink) which is a reparse point. Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org> CC: stable <stable@vger.kernel.org> #v3.13+
2014-08-17CIFS: Fix SMB2 readdir error handlingPavel Shilovsky1-0/+7
SMB2 servers indicates the end of a directory search with STATUS_NO_MORE_FILE error code that is not processed now. This causes generic/257 xfstest to fail. Fix this by triggering the end of search by this error code in SMB2_query_directory. Also when negotiating CIFS protocol we tell the server to close the search automatically at the end and there is no need to do it itself. In the case of SMB2 protocol, we need to close it explicitly - separate close directory checks for different protocols. Cc: <stable@vger.kernel.org> Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2014-08-02CIFS: Use multicredits for SMB 2.1/3 writesPavel Shilovsky1-0/+1
If we negotiate SMB 2.1 and higher version of the protocol and a server supports large write buffer size, we need to consume 1 credit per 65536 bytes. So, we need to know how many credits we have and obtain the required number of them before constructing a writedata structure in writepages and iovec write. Reviewed-by: Shirish Pargaonkar <spargaonkar@suse.com> Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2014-08-02CIFS: Fix cifs_writev_requeue when wsize changesPavel Shilovsky1-0/+7
If wsize changes on reconnect we need to use new writedata structure that for retrying. Reviewed-by: Shirish Pargaonkar <spargaonkar@suse.com> Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2014-04-16cifs: Wait for writebacks to complete before attempting write.Sachin Prabhu1-0/+11
Problem reported in Red Hat bz 1040329 for strict writes where we cache only when we hold oplock and write direct to the server when we don't. When we receive an oplock break, we first change the oplock value for the inode in cifsInodeInfo->oplock to indicate that we no longer hold the oplock before we enqueue a task to flush changes to the backing device. Once we have completed flushing the changes, we return the oplock to the server. There are 2 ways here where we can have data corruption 1) While we flush changes to the backing device as part of the oplock break, we can have processes write to the file. These writes check for the oplock, find none and attempt to write directly to the server. These direct writes made while we are flushing from cache could be overwritten by data being flushed from the cache causing data corruption. 2) While a thread runs in cifs_strict_writev, the machine could receive and process an oplock break after the thread has checked the oplock and found that it allows us to cache and before we have made changes to the cache. In that case, we end up with a dirty page in cache when we shouldn't have any. This will be flushed later and will overwrite all subsequent writes to the part of the file represented by this page. Before making any writes to the server, we need to confirm that we are not in the process of flushing data to the server and if we are, we should wait until the process is complete before we attempt the write. We should also wait for existing writes to complete before we process an oplock break request which changes oplock values. We add a version specific downgrade_oplock() operation to allow for differences in the oplock values set for the different smb versions. Cc: stable@vger.kernel.org Signed-off-by: Sachin Prabhu <sprabhu@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <smfrench@gmail.com>
2014-02-10[CIFS] Fix cifsacl mounts over smb2 to not call cifsSteve French1-0/+1
When mounting with smb2/smb3 (e.g. vers=2.1) and cifsacl mount option, it was trying to get the mode by querying the acl over the cifs rather than smb2 protocol. This patch makes that protocol independent and makes cifsacl smb2 mounts return a more intuitive operation not supported error (until we add a worker function for smb2_get_acl). Note that a previous patch fixed getxattr/setxattr for the CIFSACL xattr which would unconditionally call cifs_get_acl and cifs_set_acl (even when mounted smb2). I made those protocol independent last week (new protocol version operations "get_acl" and "set_acl" but did not add an smb2_get_acl and smb2_set_acl yet so those now simply return EOPNOTSUPP which at least is better than sending cifs requests on smb2 mount) The previous patches did not fix the one remaining case though ie mounting with "cifsacl" when getting mode from acl would unconditionally end up calling "cifs_get_acl_from_fid" even for smb2 - so made that protocol independent but to make that protocol independent had to make sure that the callers were passing the protocol independent handle structure (cifs_fid) instead of cifs specific _u16 network file handle (ie cifs_fid instead of cifs_fid->fid) Now mount with smb2 and cifsacl mount options will return EOPNOTSUP (instead of timing out) and a future patch will add smb2 operations (e.g. get_smb2_acl) to enable this. Signed-off-by: Steve French <smfrench@gmail.com>
2014-02-07retrieving CIFS ACLs when mounted with SMB2 fails dropping sessionSteve French1-0/+4
The get/set ACL xattr support for CIFS ACLs attempts to send old cifs dialect protocol requests even when mounted with SMB2 or later dialects. Sending cifs requests on an smb2 session causes problems - the server drops the session due to the illegal request. This patch makes CIFS ACL operations protocol specific to fix that. Attempting to query/set CIFS ACLs for SMB2 will now return EOPNOTSUPP (until we add worker routines for sending query ACL requests via SMB2) instead of sending invalid (cifs) requests. A separate followon patch will be needed to fix cifs_acl_to_fattr (which takes a cifs specific u16 fid so can't be abstracted to work with SMB2 until that is changed) and will be needed to fix mount problems when "cifsacl" is specified on mount with e.g. vers=2.1 Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Shirish Pargaonkar <spargaonkar@suse.com> CC: Stable <stable@kernel.org>
2014-02-07Add protocol specific operation for CIFS xattrsSteve French1-0/+4
Changeset 666753c3ef8fc88b0ddd5be4865d0aa66428ac35 added protocol operations for get/setxattr to avoid calling cifs operations on smb2/smb3 mounts for xattr operations and this changeset adds the calls to cifs specific protocol operations for xattrs (in order to reenable cifs support for xattrs which was temporarily disabled by the previous changeset. We do not have SMB2/SMB3 worker function for setting xattrs yet so this only enables it for cifs. CCing stable since without these two small changsets (its small coreq 666753c3ef8fc88b0ddd5be4865d0aa66428ac35 is also needed) calling getfattr/setfattr on smb2/smb3 mounts causes problems. Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Shirish Pargaonkar <spargaonkar@suse.com> CC: Stable <stable@kernel.org>
2014-01-20CIFS: Cleanup cifs open codepathPavel Shilovsky1-28/+43
Rename CIFSSMBOpen to CIFS_open and make it take cifs_open_parms structure as a parm. Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <smfrench@gmail.com>
2014-01-20cifs: Add support for follow_link on dfs shares under posix extensionsSachin Prabhu1-0/+32
When using posix extensions, dfs shares in the dfs root show up as symlinks resulting in userland tools such as 'ls' calling readlink() on these shares. Since these are dfs shares, we end up returning -EREMOTE. $ ls -l /mnt ls: cannot read symbolic link /mnt/test: Object is remote total 0 lrwxrwxrwx. 1 root root 19 Nov 6 09:47 test With added follow_link() support for dfs shares, when using unix extensions, we call GET_DFS_REFERRAL to obtain the DFS referral and return the first node returned. The dfs share in the dfs root is now displayed in the following manner. $ ls -l /mnt total 0 lrwxrwxrwx. 1 root root 19 Nov 6 09:47 test -> \vm140-31\test Signed-off-by: Sachin Prabhu <sprabhu@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2014-01-20cifs: move unix extension call to cifs_query_symlink()Sachin Prabhu1-6/+14
Unix extensions rigth now are only applicable to smb1 operations. Move the check and subsequent unix extension call to the smb1 specific call to query_symlink() ie. cifs_query_symlink(). Signed-off-by: Sachin Prabhu <sprabhu@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2014-01-20cifs: Add create MFSymlinks to protocol ops structSachin Prabhu1-0/+1
Add a new protocol ops function create_mf_symlink and have create_mf_symlink() use it. This patchset moves the MFSymlink operations completely to the ops structure so that we only use the right protocol versions when querying or creating MFSymlinks. Signed-off-by: Sachin Prabhu <sprabhu@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2014-01-20cifs: Rename and cleanup open_query_close_cifs_symlink()Sachin Prabhu1-1/+1
Rename open_query_close_cifs_symlink to cifs_query_mf_symlink() to make the name more consistent with other protocol version specific functions. We also pass tcon as an argument to the function. This is already available in the calling functions and we can avoid having to make an unnecessary lookup. Signed-off-by: Sachin Prabhu <sprabhu@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2013-11-11CIFS: Fix symbolic links usagePavel Shilovsky1-1/+20
Now we treat any reparse point as a symbolic link and map it to a Unix one that is not true in a common case due to many reparse point types supported by SMB servers. Distinguish reparse point types into two groups: 1) that can be accessed directly through a reparse point (junctions, deduplicated files, NFS symlinks); 2) that need to be processed manually (Windows symbolic links, DFS); and map only Windows symbolic links to Unix ones. Cc: <stable@vger.kernel.org> Acked-by: Jeff Layton <jlayton@redhat.com> Reported-and-tested-by: Joao Correia <joaomiguelcorreia@gmail.com> Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <smfrench@gmail.com>
2013-11-02Allow setting per-file compression via CIFS protocolSteve French1-0/+8
An earlier patch allowed setting the per-file compression flag "chattr +c filename" on an smb2 or smb3 mount, and also allowed lsattr to return whether a file on a cifs, or smb2/smb3 mount was compressed. This patch extends the ability to set the per-file compression flag to the cifs protocol, which uses a somewhat different IOCTL mechanism than SMB2, although the payload (the flags stored in the compression_state) are the same. Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2013-11-02cifs: Make big endian multiplex ID sequences monotonic on the wireTim Gardner1-2/+2
The multiplex identifier (MID) in the SMB header is only ever used by the client, in conjunction with PID, to match responses from the server. As such, the endianess of the MID is not important. However, When tracing packet sequences on the wire, protocol analyzers such as wireshark display MID as little endian. It is much more informative for the on-the-wire MID sequences to match debug information emitted by the CIFS driver. Therefore, one should write and read MID in the SMB header assuming it is always little endian. Observed from wireshark during the protocol negotiation and session setup: Multiplex ID: 256 Multiplex ID: 256 Multiplex ID: 512 Multiplex ID: 512 Multiplex ID: 768 Multiplex ID: 768 After this patch on-the-wire MID values begin at 1 and increase monotonically. Introduce get_next_mid64() for the internal consumers that use the full 64 bit multiplex identifier. Introduce the helpers get_mid() and compare_mid() to make the endian translation clear. Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Tim Gardner <timg@tpi.com> Signed-off-by: Steve French <smfrench@gmail.com>
2013-09-09CIFS: Store lease state itself rather than a mapped oplock valuePavel Shilovsky1-1/+7
and separate smb20_operations struct. Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2013-09-08CIFS: Replace clientCanCache* bools with an integerPavel Shilovsky1-2/+2
that prepare the code to handle different types of SMB2 leases. Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2013-09-08CIFS: Implement follow_link for nounix CIFS mountsPavel Shilovsky1-0/+32
by using a query reparse ioctl request. Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2013-07-30Do not attempt to do cifs operations reading symlinks with SMB2Steve French1-0/+1
When use of symlinks is enabled (mounting with mfsymlinks option) to non-Samba servers, we always tried to use cifs, even when we were mounted with SMB2 or SMB3, which causes the server to drop the network connection. This patch separates out the protocol specific operations for cifs from the code which recognizes symlinks, and fixes the problem where with SMB2 mounts we attempt cifs operations to open and read symlinks. The next patch will add support for SMB2 for opening and reading symlinks. Additional followon patches will address the similar problem creating symlinks. Signed-off-by: Steve French <smfrench@gmail.com>
2013-07-10CIFS: Introduce cifs_open_parms structPavel Shilovsky1-13/+16
and pass it to the open() call. Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steven French <steven@steven-GA-970A-DS3.(none)>
2013-06-27cifs: fix SMB2 signing enablement in cifs_enable_signingJeff Layton1-0/+2
Commit 9ddec56131 (cifs: move handling of signed connections into separate function) broke signing on SMB2/3 connections. While the code to enable signing on the connections was very similar between the two, the bits that get set in the sec_mode are different. Declare a couple of new smb_version_values fields and set them appropriately for SMB1 and SMB2/3. Then change cifs_enable_signing to use those instead. Reported-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Tested-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: Steve French <smfrench@gmail.com>
2013-06-24cifs: track the enablement of signing in the TCP_Server_InfoJeff Layton1-2/+1
Currently, we determine this according to flags in the sec_mode, flags in the global_secflags and via other methods. That makes the semantics very hard to follow and there are corner cases where we don't handle this correctly. Add a new bool to the TCP_Server_Info that acts as a simple flag to tell us whether signing is enabled on this connection or not, and fix up the places that need to determine this to use that flag. This is a bit weird for the SMB2 case, where signing is per-session. SMB2 needs work in this area already though. The existing SMB2 code has similar logic to what we're using here, so there should be no real change in behavior. These changes should make it easier to implement per-session signing in the future though. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <smfrench@gmail.com>
2013-06-24cifs: remove the cifs_ses->flags fieldJeff Layton1-12/+6
This field is completely unused: CIFS_SES_W9X is completely unused. CIFS_SES_LANMAN and CIFS_SES_OS2 are set but never checked. CIFS_SES_NT4 is checked, but never set. Signed-off-by: Jeff Layton <jlayton@redhat.com> Acked-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <sfrench@us.ibm.com>
2013-05-04cifs: on send failure, readjust server sequence number downwardJeff Layton1-0/+3
If sending a call to the server fails for some reason (for instance, the sending thread caught a signal), then we must readjust the sequence number downward again or the next send will have it too high. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com> Signed-off-by: Steve French <smfrench@gmail.com>
2013-05-04[CIFS] cifs: Rename cERROR and cFYI to cifs_dbgJoe Perches1-23/+24
It's not obvious from reading the macro names that these macros are for debugging. Convert the names to a single more typical kernel style cifs_dbg macro. cERROR(1, ...) -> cifs_dbg(VFS, ...) cFYI(1, ...) -> cifs_dbg(FYI, ...) cFYI(DBG2, ...) -> cifs_dbg(NOISY, ...) Move the terminating format newline from the macro to the call site. Add CONFIG_CIFS_DEBUG function cifs_vfs_err to emit the "CIFS VFS: " prefix for VFS messages. Size is reduced ~ 1% when CONFIG_CIFS_DEBUG is set (default y) $ size fs/cifs/cifs.ko* text data bss dec hex filename 265245 2525 132 267902 4167e fs/cifs/cifs.ko.new 268359 2525 132 271016 422a8 fs/cifs/cifs.ko.old Other miscellaneous changes around these conversions: o Miscellaneous typo fixes o Add terminating \n's to almost all formats and remove them from the macros to be more kernel style like. A few formats previously had defective \n's o Remove unnecessary OOM messages as kmalloc() calls dump_stack o Coalesce formats to make grep easier, added missing spaces when coalescing formats o Use %s, __func__ instead of embedded function name o Removed unnecessary "cifs: " prefixes o Convert kzalloc with multiply to kcalloc o Remove unused cifswarn macro Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2013-01-01CIFS: Don't let read only caching for mandatory byte-range locked filesPavel Shilovsky1-0/+1
If we have mandatory byte-range locks on a file we can't cache reads because pagereading may have conflicts with these locks on the server. That's why we should allow level2 oplocks for files without mandatory locks only. Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2012-12-30cifs: adjust sequence number downward after signing NT_CANCEL requestJeff Layton1-0/+7
When a call goes out, the signing code adjusts the sequence number upward by two to account for the request and the response. An NT_CANCEL however doesn't get a response of its own, it just hurries the server along to get it to respond to the original request more quickly. Therefore, we must adjust the sequence number back down by one after signing a NT_CANCEL request. Cc: <stable@vger.kernel.org> Reported-by: Tim Perry <tdparmor-sambabugs@yahoo.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2012-12-05CIFS: Make use of common cifs_build_path_to_root for CIFS and SMB2Steve French1-32/+0
because the is no difference here. This also adds support of prefixpath mount option for SMB2. Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.