aboutsummaryrefslogtreecommitdiffstats
path: root/fs/cifs/smb1ops.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2014-02-10[CIFS] Fix cifsacl mounts over smb2 to not call cifsSteve French1-0/+1
When mounting with smb2/smb3 (e.g. vers=2.1) and cifsacl mount option, it was trying to get the mode by querying the acl over the cifs rather than smb2 protocol. This patch makes that protocol independent and makes cifsacl smb2 mounts return a more intuitive operation not supported error (until we add a worker function for smb2_get_acl). Note that a previous patch fixed getxattr/setxattr for the CIFSACL xattr which would unconditionally call cifs_get_acl and cifs_set_acl (even when mounted smb2). I made those protocol independent last week (new protocol version operations "get_acl" and "set_acl" but did not add an smb2_get_acl and smb2_set_acl yet so those now simply return EOPNOTSUPP which at least is better than sending cifs requests on smb2 mount) The previous patches did not fix the one remaining case though ie mounting with "cifsacl" when getting mode from acl would unconditionally end up calling "cifs_get_acl_from_fid" even for smb2 - so made that protocol independent but to make that protocol independent had to make sure that the callers were passing the protocol independent handle structure (cifs_fid) instead of cifs specific _u16 network file handle (ie cifs_fid instead of cifs_fid->fid) Now mount with smb2 and cifsacl mount options will return EOPNOTSUP (instead of timing out) and a future patch will add smb2 operations (e.g. get_smb2_acl) to enable this. Signed-off-by: Steve French <smfrench@gmail.com>
2014-02-07retrieving CIFS ACLs when mounted with SMB2 fails dropping sessionSteve French1-0/+4
The get/set ACL xattr support for CIFS ACLs attempts to send old cifs dialect protocol requests even when mounted with SMB2 or later dialects. Sending cifs requests on an smb2 session causes problems - the server drops the session due to the illegal request. This patch makes CIFS ACL operations protocol specific to fix that. Attempting to query/set CIFS ACLs for SMB2 will now return EOPNOTSUPP (until we add worker routines for sending query ACL requests via SMB2) instead of sending invalid (cifs) requests. A separate followon patch will be needed to fix cifs_acl_to_fattr (which takes a cifs specific u16 fid so can't be abstracted to work with SMB2 until that is changed) and will be needed to fix mount problems when "cifsacl" is specified on mount with e.g. vers=2.1 Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Shirish Pargaonkar <spargaonkar@suse.com> CC: Stable <stable@kernel.org>
2014-02-07Add protocol specific operation for CIFS xattrsSteve French1-0/+4
Changeset 666753c3ef8fc88b0ddd5be4865d0aa66428ac35 added protocol operations for get/setxattr to avoid calling cifs operations on smb2/smb3 mounts for xattr operations and this changeset adds the calls to cifs specific protocol operations for xattrs (in order to reenable cifs support for xattrs which was temporarily disabled by the previous changeset. We do not have SMB2/SMB3 worker function for setting xattrs yet so this only enables it for cifs. CCing stable since without these two small changsets (its small coreq 666753c3ef8fc88b0ddd5be4865d0aa66428ac35 is also needed) calling getfattr/setfattr on smb2/smb3 mounts causes problems. Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Shirish Pargaonkar <spargaonkar@suse.com> CC: Stable <stable@kernel.org>
2014-01-20CIFS: Cleanup cifs open codepathPavel Shilovsky1-28/+43
Rename CIFSSMBOpen to CIFS_open and make it take cifs_open_parms structure as a parm. Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <smfrench@gmail.com>
2014-01-20cifs: Add support for follow_link on dfs shares under posix extensionsSachin Prabhu1-0/+32
When using posix extensions, dfs shares in the dfs root show up as symlinks resulting in userland tools such as 'ls' calling readlink() on these shares. Since these are dfs shares, we end up returning -EREMOTE. $ ls -l /mnt ls: cannot read symbolic link /mnt/test: Object is remote total 0 lrwxrwxrwx. 1 root root 19 Nov 6 09:47 test With added follow_link() support for dfs shares, when using unix extensions, we call GET_DFS_REFERRAL to obtain the DFS referral and return the first node returned. The dfs share in the dfs root is now displayed in the following manner. $ ls -l /mnt total 0 lrwxrwxrwx. 1 root root 19 Nov 6 09:47 test -> \vm140-31\test Signed-off-by: Sachin Prabhu <sprabhu@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2014-01-20cifs: move unix extension call to cifs_query_symlink()Sachin Prabhu1-6/+14
Unix extensions rigth now are only applicable to smb1 operations. Move the check and subsequent unix extension call to the smb1 specific call to query_symlink() ie. cifs_query_symlink(). Signed-off-by: Sachin Prabhu <sprabhu@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2014-01-20cifs: Add create MFSymlinks to protocol ops structSachin Prabhu1-0/+1
Add a new protocol ops function create_mf_symlink and have create_mf_symlink() use it. This patchset moves the MFSymlink operations completely to the ops structure so that we only use the right protocol versions when querying or creating MFSymlinks. Signed-off-by: Sachin Prabhu <sprabhu@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2014-01-20cifs: Rename and cleanup open_query_close_cifs_symlink()Sachin Prabhu1-1/+1
Rename open_query_close_cifs_symlink to cifs_query_mf_symlink() to make the name more consistent with other protocol version specific functions. We also pass tcon as an argument to the function. This is already available in the calling functions and we can avoid having to make an unnecessary lookup. Signed-off-by: Sachin Prabhu <sprabhu@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2013-11-11CIFS: Fix symbolic links usagePavel Shilovsky1-1/+20
Now we treat any reparse point as a symbolic link and map it to a Unix one that is not true in a common case due to many reparse point types supported by SMB servers. Distinguish reparse point types into two groups: 1) that can be accessed directly through a reparse point (junctions, deduplicated files, NFS symlinks); 2) that need to be processed manually (Windows symbolic links, DFS); and map only Windows symbolic links to Unix ones. Cc: <stable@vger.kernel.org> Acked-by: Jeff Layton <jlayton@redhat.com> Reported-and-tested-by: Joao Correia <joaomiguelcorreia@gmail.com> Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <smfrench@gmail.com>
2013-11-02Allow setting per-file compression via CIFS protocolSteve French1-0/+8
An earlier patch allowed setting the per-file compression flag "chattr +c filename" on an smb2 or smb3 mount, and also allowed lsattr to return whether a file on a cifs, or smb2/smb3 mount was compressed. This patch extends the ability to set the per-file compression flag to the cifs protocol, which uses a somewhat different IOCTL mechanism than SMB2, although the payload (the flags stored in the compression_state) are the same. Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2013-11-02cifs: Make big endian multiplex ID sequences monotonic on the wireTim Gardner1-2/+2
The multiplex identifier (MID) in the SMB header is only ever used by the client, in conjunction with PID, to match responses from the server. As such, the endianess of the MID is not important. However, When tracing packet sequences on the wire, protocol analyzers such as wireshark display MID as little endian. It is much more informative for the on-the-wire MID sequences to match debug information emitted by the CIFS driver. Therefore, one should write and read MID in the SMB header assuming it is always little endian. Observed from wireshark during the protocol negotiation and session setup: Multiplex ID: 256 Multiplex ID: 256 Multiplex ID: 512 Multiplex ID: 512 Multiplex ID: 768 Multiplex ID: 768 After this patch on-the-wire MID values begin at 1 and increase monotonically. Introduce get_next_mid64() for the internal consumers that use the full 64 bit multiplex identifier. Introduce the helpers get_mid() and compare_mid() to make the endian translation clear. Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Tim Gardner <timg@tpi.com> Signed-off-by: Steve French <smfrench@gmail.com>
2013-09-09CIFS: Store lease state itself rather than a mapped oplock valuePavel Shilovsky1-1/+7
and separate smb20_operations struct. Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2013-09-08CIFS: Replace clientCanCache* bools with an integerPavel Shilovsky1-2/+2
that prepare the code to handle different types of SMB2 leases. Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2013-09-08CIFS: Implement follow_link for nounix CIFS mountsPavel Shilovsky1-0/+32
by using a query reparse ioctl request. Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2013-07-30Do not attempt to do cifs operations reading symlinks with SMB2Steve French1-0/+1
When use of symlinks is enabled (mounting with mfsymlinks option) to non-Samba servers, we always tried to use cifs, even when we were mounted with SMB2 or SMB3, which causes the server to drop the network connection. This patch separates out the protocol specific operations for cifs from the code which recognizes symlinks, and fixes the problem where with SMB2 mounts we attempt cifs operations to open and read symlinks. The next patch will add support for SMB2 for opening and reading symlinks. Additional followon patches will address the similar problem creating symlinks. Signed-off-by: Steve French <smfrench@gmail.com>
2013-07-10CIFS: Introduce cifs_open_parms structPavel Shilovsky1-13/+16
and pass it to the open() call. Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steven French <steven@steven-GA-970A-DS3.(none)>
2013-06-27cifs: fix SMB2 signing enablement in cifs_enable_signingJeff Layton1-0/+2
Commit 9ddec56131 (cifs: move handling of signed connections into separate function) broke signing on SMB2/3 connections. While the code to enable signing on the connections was very similar between the two, the bits that get set in the sec_mode are different. Declare a couple of new smb_version_values fields and set them appropriately for SMB1 and SMB2/3. Then change cifs_enable_signing to use those instead. Reported-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Tested-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: Steve French <smfrench@gmail.com>
2013-06-24cifs: track the enablement of signing in the TCP_Server_InfoJeff Layton1-2/+1
Currently, we determine this according to flags in the sec_mode, flags in the global_secflags and via other methods. That makes the semantics very hard to follow and there are corner cases where we don't handle this correctly. Add a new bool to the TCP_Server_Info that acts as a simple flag to tell us whether signing is enabled on this connection or not, and fix up the places that need to determine this to use that flag. This is a bit weird for the SMB2 case, where signing is per-session. SMB2 needs work in this area already though. The existing SMB2 code has similar logic to what we're using here, so there should be no real change in behavior. These changes should make it easier to implement per-session signing in the future though. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <smfrench@gmail.com>
2013-06-24cifs: remove the cifs_ses->flags fieldJeff Layton1-12/+6
This field is completely unused: CIFS_SES_W9X is completely unused. CIFS_SES_LANMAN and CIFS_SES_OS2 are set but never checked. CIFS_SES_NT4 is checked, but never set. Signed-off-by: Jeff Layton <jlayton@redhat.com> Acked-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <sfrench@us.ibm.com>
2013-05-04cifs: on send failure, readjust server sequence number downwardJeff Layton1-0/+3
If sending a call to the server fails for some reason (for instance, the sending thread caught a signal), then we must readjust the sequence number downward again or the next send will have it too high. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com> Signed-off-by: Steve French <smfrench@gmail.com>
2013-05-04[CIFS] cifs: Rename cERROR and cFYI to cifs_dbgJoe Perches1-23/+24
It's not obvious from reading the macro names that these macros are for debugging. Convert the names to a single more typical kernel style cifs_dbg macro. cERROR(1, ...) -> cifs_dbg(VFS, ...) cFYI(1, ...) -> cifs_dbg(FYI, ...) cFYI(DBG2, ...) -> cifs_dbg(NOISY, ...) Move the terminating format newline from the macro to the call site. Add CONFIG_CIFS_DEBUG function cifs_vfs_err to emit the "CIFS VFS: " prefix for VFS messages. Size is reduced ~ 1% when CONFIG_CIFS_DEBUG is set (default y) $ size fs/cifs/cifs.ko* text data bss dec hex filename 265245 2525 132 267902 4167e fs/cifs/cifs.ko.new 268359 2525 132 271016 422a8 fs/cifs/cifs.ko.old Other miscellaneous changes around these conversions: o Miscellaneous typo fixes o Add terminating \n's to almost all formats and remove them from the macros to be more kernel style like. A few formats previously had defective \n's o Remove unnecessary OOM messages as kmalloc() calls dump_stack o Coalesce formats to make grep easier, added missing spaces when coalescing formats o Use %s, __func__ instead of embedded function name o Removed unnecessary "cifs: " prefixes o Convert kzalloc with multiply to kcalloc o Remove unused cifswarn macro Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2013-01-01CIFS: Don't let read only caching for mandatory byte-range locked filesPavel Shilovsky1-0/+1
If we have mandatory byte-range locks on a file we can't cache reads because pagereading may have conflicts with these locks on the server. That's why we should allow level2 oplocks for files without mandatory locks only. Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2012-12-30cifs: adjust sequence number downward after signing NT_CANCEL requestJeff Layton1-0/+7
When a call goes out, the signing code adjusts the sequence number upward by two to account for the request and the response. An NT_CANCEL however doesn't get a response of its own, it just hurries the server along to get it to respond to the original request more quickly. Therefore, we must adjust the sequence number back down by one after signing a NT_CANCEL request. Cc: <stable@vger.kernel.org> Reported-by: Tim Perry <tdparmor-sambabugs@yahoo.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2012-12-05CIFS: Make use of common cifs_build_path_to_root for CIFS and SMB2Steve French1-32/+0
because the is no difference here. This also adds support of prefixpath mount option for SMB2. Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2012-11-28CIFS: Fix wrong buffer pointer usage in smb_set_file_infoPavel Shilovsky1-2/+1
Commit 6bdf6dbd662176c0da5c3ac8ed10ac94e7776c85 caused a regression in setattr codepath that leads to files with wrong attributes. Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-28cifs: obtain file access during backup intent lookup (resend)Shirish Pargaonkar1-4/+2
Rebased and resending the patch. Path based queries can fail for lack of access, especially during lookup during open. open itself would actually succeed becasue of back up intent bit but queries (either path or file handle based) do not have a means to specifiy backup intent bit. So query the file info during lookup using trans2 / findfirst / file_id_full_dir_info to obtain file info as well as file_id/inode value. Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Acked-by: Jeff Layton <jlayton@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-26CIFS: Make ops->close return voidPavel Shilovsky1-2/+2
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24CIFS: Move brlock code to ops structPavel Shilovsky1-0/+12
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
2012-09-24cifs: remove kmap lock and rsize limitJeff Layton1-3/+0
Now that we aren't abusing the kmap address space, there's no need for this lock or to impose a limit on the rsize. Signed-off-by: Jeff Layton <jlayton@redhat.com>
2012-09-24cifs: remove the kmap size limit from wsizeJeff Layton1-3/+0
Now that we're not kmapping so much at once, there's no need to cap the wsize at the amount that can be simultaneously kmapped. Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24CIFS: Move statfs to ops structPavel Shilovsky1-0/+34
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24CIFS: Move oplock break to ops structPavel Shilovsky1-0/+10
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24CIFS: Move readdir code to ops structPavel Shilovsky1-0/+31
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24CIFS: Move set_file_info to ops structPavel Shilovsky1-0/+79
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24CIFS: Move set_file_size to ops structPavel Shilovsky1-0/+2
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24CIFS: Move hardlink to ops structSteve French1-0/+1
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <sfrench@us.ibm.com> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24CIFS: Move rename to ops structPavel Shilovsky1-0/+1
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24CIFS: Move writepage to ops structPavel Shilovsky1-0/+11
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24CIFS: Move readpage code to ops structPavel Shilovsky1-0/+10
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24CIFS: Move async write to ops structPavel Shilovsky1-0/+1
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24CIFS: Move async read to ops structPavel Shilovsky1-0/+1
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24CIFS: Move r/wsize negotiating to ops structPavel Shilovsky1-0/+86
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24CIFS: Make flush code use ops structPavel Shilovsky1-0/+8
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24CIFS: Move create code use ops structPavel Shilovsky1-1/+1
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24CIFS: Move guery file info code to ops structPavel Shilovsky1-0/+8
and make cifs_get_file_info(_unix) calls static. Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24CIFS: Move close code to ops structPavel Shilovsky1-0/+8
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24CIFS: Move open code to ops structPavel Shilovsky1-0/+29
Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24CIFS: Replace netfid with cifs_fid struct in cifsFileInfoPavel Shilovsky1-1/+1
This is help us to extend the code for future protocols that can use another fid mechanism (as SMB2 that has it divided into two parts: persistent and violatile). Also rename variables and refactor the code around the changes. Reviewed-by: Jeff Layton <jlayton@samba.org> Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24CIFS: Move unlink code to ops structPavel Shilovsky1-0/+2
Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2012-07-27CIFS: Move rmdir code to ops structPavel Shilovsky1-0/+1
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.