aboutsummaryrefslogtreecommitdiffstats
path: root/fs/eventfd.c (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2019-10-31dpaa_eth: register a device link for the qman portal usedMadalin Bucur3-15/+3
Before this change, unbinding the QMan portals did not trigger a corresponding unbinding of the dpaa_eth making use of it; the first QMan portal related operation issued afterwards crashed the kernel. The device link ensures the dpaa_eth dependency upon the qman portal used is honoured at the QMan portal removal. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31soc: fsl: qbman: allow registering a device link for the portal userMadalin Bucur2-0/+31
Introduce the API required to make sure that the devices that use the QMan portal are unbound when the portal is unbound. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31dpaa_eth: extend delays in ndo_stopMadalin Bucur1-1/+3
Make sure all the frames that are in flight have time to be processed before the interface is completely brought down. Add a missing delay for the Rx path. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31dpaa_eth: remove netdev_err() for user errorsMadalin Bucur1-12/+4
User reports that an application making an (incorrect) call to restart AN on a fixed link DPAA interface triggers an error in the kernel log while the returned EINVAL should be enough. Reported-by: Joakim Tjernlund <Joakim.Tjernlund@infinera.com> Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31dpaa_eth: add dropped frames to percpu ethtool statsMadalin Bucur1-0/+8
Prior to this change, the frames dropped on receive or transmit were not displayed in the ethtool statistics, leaving the dropped frames unaccounted for. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31dpaa_eth: use a page to store the SGTMadalin Bucur1-22/+21
Use a page to store the scatter gather table on the transmit path. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31dpaa_eth: cleanup skb_to_contig_fd()Madalin Bucur1-7/+7
Remove cast, align variable name, simplify DMA map size computation. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31dpaa_eth: use fd information in dpaa_cleanup_tx_fd()Madalin Bucur1-6/+7
Instead of reading skb fields, use information from the DPAA frame descriptor. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31dpaa_eth: simplify variables used in dpaa_cleanup_tx_fd()Madalin Bucur1-7/+7
Avoid casts and repeated conversions. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31dpaa_eth: avoid timestamp read on error pathsMadalin Bucur1-7/+10
The dpaa_cleanup_tx_fd() function is called by the frame transmit confirmation callback but also on several error paths. This function is reading the transmit timestamp value. Avoid reading an invalid timestamp value on the error paths. Fixes: 4664856e9ca2 ("dpaa_eth: add support for hardware timestamping") Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31dpaa_eth: perform DMA unmapping before readMadalin Bucur1-15/+17
DMA unmapping is required before accessing the HW provided timestamping information. Fixes: 4664856e9ca2 ("dpaa_eth: add support for hardware timestamping") Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31dpaa_eth: use page backed rx buffersMadalin Bucur1-29/+22
Change the buffers used for reception from netdev_frags to pages. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31dpaa_eth: use only one buffer pool per interfaceMadalin Bucur4-92/+57
Currently the DPAA Ethernet driver is using three buffer pools for each interface, with three different sizes for the buffers provided for the FMan reception path. This patch reduces the number of buffer pools to one per interface. This change is in preparation of another, that will be switching from netdev_frags to page backed buffers for the receive path. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31net: hns3: cleanup byte order issues when printedGuojia Liao4-62/+83
Though the hip08 and the IMP(Intelligent Management Processor) have the same byte order right now, it is better to convert __be or __le variable into the CPU's byte order before print. Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31net: hns3: cleanup some print format warningGuojia Liao14-101/+101
Using '%d' for printing type unsigned int or '%u' for type int would cause static tools to give false warnings, so this patch cleanups this warning by using the suitable format specifier of the type of variable. BTW, modifies the type of some variables and macro to synchronize with their usage. Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31net: hns3: add or modify some commentsGuangbin Huang3-2/+5
This patch makes the comment for macro HCLGE_MBX_GET_VF_FLR_STATUS more correct, and adds comments in some place to make the code more readable. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31net: hns3: optimize local variable initializationGuangbin Huang2-3/+2
The variable tx_ring is unnecessary to be initialized as it will be set before used, and the variable rst_cnt is better to be initialized when declaration for simplification. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31net: hns3: cleanup a format-truncation warningGuojia Liao1-1/+2
In hns3_nic_init_irq(), when '*_int_idx' has more than 9 digits and the length of netdev's name is IFNAMSIZ, the total length of final name will be bigger the HNAE3_INT_NAME_LEN - 1, even though '*_int_idx' will never have such large value, but the compiler gives a format-truncation warning for this case. So this patch just enlarges the length to avoid this warning. Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31net: hns3: cleanup some coding style issuesGuangbin Huang7-14/+13
To unify code style and make code simpler, this patch modifies some code, deletes unnecessary blank lines and {}, changes location of code, and so on. No functional change. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31net: hns3: cleanup some magic numbersGuojia Liao6-20/+34
To make the code more readable, this patch replaces some magic numbers with macro or sizeof operation. Also uses macro lower_32_bits and upper_32_bits to get bits 0-31 and 32-63 of a number, instead of using type conversion and '>>' operation. No functional change. Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31net: hns3: add struct netdev_queue debug info for TX timeoutYunsheng Lin1-0/+3
When there is a TX timeout, we can tell if the driver or stack has stopped the queue by looking at state field, and when has the last packet transmited by looking at trans_start field. So this patch prints these two field in the hns3_get_tx_timeo_queue_info(). Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31net: hns3: dump some debug information when reset failHuazhong Tan4-4/+35
When reset fails, there is some information that will help for finding out why does reset fail. and removes an unused core_rst_cnt field in struct hclge_rst_stats. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31bnxt_en: Add support to collect crash dump via ethtoolVasundhara Volam3-2/+40
Driver supports 2 types of core dumps. 1. Live dump - Firmware dump when system is up and running. 2. Crash dump - Dump which is collected during firmware crash that can be retrieved after recovery. Crash dump is currently supported only on specific 58800 chips which can be retrieved using OP-TEE API only, as firmware cannot access this region directly. User needs to set the dump flag using following command before initiating the dump collection: $ ethtool -W|--set-dump eth0 N Where N is "0" for live dump and "1" for crash dump Command to collect the dump after setting the flag: $ ethtool -w eth0 data Filename v3: Modify set_dump to support even when CONFIG_TEE_BNXT_FW=n. Also change log message to netdev_info(). Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Sheetal Tigadoli <sheetal.tigadoli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31bnxt_en: Add support to invoke OP-TEE API to reset firmwareVasundhara Volam2-2/+14
In error recovery process when firmware indicates that it is completely down, initiate a firmware reset by calling OP-TEE API. Cc: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Sheetal Tigadoli <sheetal.tigadoli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31firmware: broadcom: add OP-TEE based BNXT f/w managerVikas Gupta4-0/+302
This driver registers on TEE bus to interact with OP-TEE based BNXT firmware management modules Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Sheetal Tigadoli <sheetal.tigadoli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Generalize split count checkJiri Pirko1-3/+3
Make the check generic for any possible value, not only 2 and 4. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Iterate over all ports in gap during unsplit createJiri Pirko1-13/+8
During recreation of original unsplit ports, just simply iterate over the whole gap and recreate whatever originally existed. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Fix base port get for split count 4 and 8Jiri Pirko1-13/+15
The current code considers only split by 2 or 4. Make the base port getting generic and allow split by 8 to be handled correctly. Generalize the used port checks as well. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Use port_module_max_width to compute base port indexJiri Pirko1-2/+0
Instead of using constant value, use port_module_max_width which is aligned with the cluster size. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Remember split base local port and use it in unsplitJiri Pirko2-9/+8
Don't compute the original base local port during unsplit, rather remember it in mlxsw_sp_port structure during split port creation. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Introduce resource for getting offset of 4 lanes split portJiri Pirko2-0/+4
In Spectrum-3 the modules have 8 lanes, so split by count 2 results in two split ports each of 4 lanes. Add a resource that can be used to obtain local port offset in that case. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Push getting offsets of split ports into a helperJiri Pirko1-23/+35
Get local port offsets of split port in a separate helper function and use it in both split and unsplit function. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Add sanity checks into module info getJiri Pirko1-2/+37
Driver assumes certain values in the PMLP register. Add checks that verify that PMLP register provides fitting values. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Pass mapping values in port mapping structureJiri Pirko1-30/+26
Pass the port mapping structure down to create, module_map and other function instead of individual values. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Use mapping of port being split for creating split portsJiri Pirko1-10/+13
Don't use constant max width value and instead of that, use the actual width of the port. Also don't pass module value and use the value stored in the same structure. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Replace port_to_module array with array of structsJiri Pirko2-39/+84
Store the initial PMLP register configuration into array of structures instead of just simple array of module numbers. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Distinguish between unsplittable and split portJiri Pirko1-4/+11
Currently when user does split, he is not able to distinguish if the port cannot be split because it is already split, or because it cannot be split at all. Add another check for split flag to distinguish this. Also add check forbidding split when maximal width is 1. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Move max_width check up before count checkJiri Pirko1-6/+6
The fact that the port cannot be split further should be checked before checking the count, so move it. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Use PMTM register to get max module widthJiri Pirko4-19/+67
Currently the max module width is hard-coded according to ASIC type. That is not entirely correct, as the max module width might differ per-board. Use PMTM register to query FW for maximal width of a module. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: reg: Add Port Module Type Mapping RegisterJiri Pirko1-0/+50
The PMTM allows query or configuration of module types. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: reg: Extend PMLP tx/rx lane value size to 4 bitsJiri Pirko1-2/+3
The tx/rx lane fields got extended to 4 bits, update the reg field description accordingly. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31cxgb4/l2t: Simplify 't4_l2e_free()' and '_t4_l2e_free()'Christophe JAILLET1-6/+2
Use '__skb_queue_purge()' instead of re-implementing it. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-30tc-testing: implement tests for new fast_init action flagVlad Buslov6-0/+144
Add basic tests to verify action creation with new fast_init flag for all actions that support the flag. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-30net: sched: update action implementations to support flagsVlad Buslov21-27/+53
Extend struct tc_action with new "tcfa_flags" field. Set the field in tcf_idr_create() function and provide new helper tcf_idr_create_from_flags() that derives 'cpustats' boolean from flags value. Update individual hardware-offloaded actions init() to pass their "flags" argument to new helper in order to skip percpu stats allocation when user requested it through flags. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-30net: sched: extend TCA_ACT space with TCA_ACT_FLAGSVlad Buslov22-26/+44
Extend TCA_ACT space with nla_bitfield32 flags. Add TCA_ACT_FLAGS_NO_PERCPU_STATS as the only allowed flag. Parse the flags in tcf_action_init_1() and pass resulting value as additional argument to a_o->init(). Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-30net: sched: modify stats helper functions to support regular statsVlad Buslov2-14/+35
Modify stats update helper functions introduced in previous patches in this series to fallback to regular tc_action->tcfa_{b|q}stats if cpu stats are not allocated for the action argument. If regular non-percpu allocated counters are in use, then obtain action tcfa_lock while modifying them. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-30net: sched: don't expose action qstats to skb_tc_reinsert()Vlad Buslov2-12/+4
Previous commit introduced helper function for updating qstats and refactored set of actions to use the helpers, instead of modifying qstats directly. However, one of the affected action exposes its qstats to skb_tc_reinsert(), which then modifies it. Refactor skb_tc_reinsert() to return integer error code and don't increment overlimit qstats in case of error, and use the returned error code in tcf_mirred_act() to manually increment the overlimit counter with new helper function. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-30net: sched: extract qstats update code into functionsVlad Buslov6-5/+21
Extract common code that increments cpu_qstats counters into standalone act API functions. Change hardware offloaded actions that use percpu counter allocation to use the new functions instead of accessing cpu_qstats directly. This commit doesn't change functionality. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-30net: sched: extract bstats update code into functionVlad Buslov7-6/+13
Extract common code that increments cpu_bstats counter into standalone act API function. Change hardware offloaded actions that use percpu counter allocation to use the new function instead of incrementing cpu_bstats directly. This commit doesn't change functionality. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-30net: sched: extract common action counters update code into functionVlad Buslov7-26/+21
Currently, all implementations of tc_action_ops->stats_update() callback have almost exactly the same implementation of counters update code (besides gact which also updates drop counter). In order to simplify support for using both percpu-allocated and regular action counters depending on run-time flag in following patches, extract action counters update code into standalone function in act API. This commit doesn't change functionality. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.