aboutsummaryrefslogtreecommitdiffstats
path: root/fs/ext3/super.c (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2011-01-06ext3: Return error code from generic_check_addressableDarrick J. Wong1-2/+4
ext3_fill_super should return the error code that generic_check_accessible returns when an error condition occurs. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Jan Kara <jack@suse.cz>
2011-01-06fs/ext3/super.c: Use printf extension %pVJoe Perches1-19/+37
Using %pV reduces the number of printk calls and eliminates any possible message interleaving from other printk calls. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jan Kara <jack@suse.cz>
2011-01-06ext3: don't update sb journal_devnum when RO devMaciej ┼╗enczykowski1-1/+1
An ext3 filesystem on a read-only device, with an external journal which is at a different device number then recorded in the superblock will fail to honor the read-only setting of the device and trigger a superblock update (write). For example: - ext3 on a software raid which is in read-only mode - external journal on a read-write device which has changed device num - attempt to mount with -o journal_dev=<new_number> - hits BUG_ON(mddev->ro = 1) in md.c Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Maciej ┼╗enczykowski <zenczykowski@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2010-11-17BKL: remove extraneous #include <smp_lock.h>Arnd Bergmann1-1/+0
The big kernel lock has been removed from all these files at some point, leaving only the #include. Remove this too as a cleanup. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-13block: clean up blkdev_get() wrappers and their usersTejun Heo1-1/+1
After recent blkdev_get() modifications, open_by_devnum() and open_bdev_exclusive() are simple wrappers around blkdev_get(). Replace them with blkdev_get_by_dev() and blkdev_get_by_path(). blkdev_get_by_dev() is identical to open_by_devnum(). blkdev_get_by_path() is slightly different in that it doesn't automatically add %FMODE_EXCL to @mode. All users are converted. Most conversions are mechanical and don't introduce any behavior difference. There are several exceptions. * btrfs now sets FMODE_EXCL in btrfs_device->mode, so there's no reason to OR it explicitly on blkdev_put(). * gfs2, nilfs2 and the generic mount_bdev() now set FMODE_EXCL in sb->s_mode. * With the above changes, sb->s_mode now always should contain FMODE_EXCL. WARN_ON_ONCE() added to kill_block_super() to detect errors. The new blkdev_get_*() functions are with proper docbook comments. While at it, add function description to blkdev_get() too. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Neil Brown <neilb@suse.de> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Joern Engel <joern@lazybastard.org> Cc: Chris Mason <chris.mason@oracle.com> Cc: Jan Kara <jack@suse.cz> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp> Cc: reiserfs-devel@vger.kernel.org Cc: xfs-masters@oss.sgi.com Cc: Alexander Viro <viro@zeniv.linux.org.uk>
2010-11-13block: make blkdev_get/put() handle exclusive accessTejun Heo1-10/+2
Over time, block layer has accumulated a set of APIs dealing with bdev open, close, claim and release. * blkdev_get/put() are the primary open and close functions. * bd_claim/release() deal with exclusive open. * open/close_bdev_exclusive() are combination of open and claim and the other way around, respectively. * bd_link/unlink_disk_holder() to create and remove holder/slave symlinks. * open_by_devnum() wraps bdget() + blkdev_get(). The interface is a bit confusing and the decoupling of open and claim makes it impossible to properly guarantee exclusive access as in-kernel open + claim sequence can disturb the existing exclusive open even before the block layer knows the current open if for another exclusive access. Reorganize the interface such that, * blkdev_get() is extended to include exclusive access management. @holder argument is added and, if is @FMODE_EXCL specified, it will gain exclusive access atomically w.r.t. other exclusive accesses. * blkdev_put() is similarly extended. It now takes @mode argument and if @FMODE_EXCL is set, it releases an exclusive access. Also, when the last exclusive claim is released, the holder/slave symlinks are removed automatically. * bd_claim/release() and close_bdev_exclusive() are no longer necessary and either made static or removed. * bd_link_disk_holder() remains the same but bd_unlink_disk_holder() is no longer necessary and removed. * open_bdev_exclusive() becomes a simple wrapper around lookup_bdev() and blkdev_get(). It also has an unexpected extra bdev_read_only() test which probably should be moved into blkdev_get(). * open_by_devnum() is modified to take @holder argument and pass it to blkdev_get(). Most of bdev open/close operations are unified into blkdev_get/put() and most exclusive accesses are tested atomically at the open time (as it should). This cleans up code and removes some, both valid and invalid, but unnecessary all the same, corner cases. open_bdev_exclusive() and open_by_devnum() can use further cleanup - rename to blkdev_get_by_path() and blkdev_get_by_devt() and drop special features. Well, let's leave them for another day. Most conversions are straight-forward. drbd conversion is a bit more involved as there was some reordering, but the logic should stay the same. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Neil Brown <neilb@suse.de> Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Acked-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Philipp Reisner <philipp.reisner@linbit.com> Cc: Peter Osterlund <petero2@telia.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Jan Kara <jack@suse.cz> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <joel.becker@oracle.com> Cc: Alex Elder <aelder@sgi.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: dm-devel@redhat.com Cc: drbd-dev@lists.linbit.com Cc: Leo Chen <leochen@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: Chris Mason <chris.mason@oracle.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Cc: Joern Engel <joern@logfs.org> Cc: reiserfs-devel@vger.kernel.org Cc: Alexander Viro <viro@zeniv.linux.org.uk>
2010-10-29new helper: mount_bdev()Al Viro1-4/+4
... and switch of the obvious get_sb_bdev() users to ->mount() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-28ext3: Use DIV_ROUND_UP() on group desc block countingNamhyung Kim1-2/+1
Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2010-10-28ext3: Return proper error code on ext3_fill_super()Namhyung Kim1-0/+2
Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2010-10-28ext3: Remove unnecessary casts on bh->b_dataNamhyung Kim1-3/+3
bh->b_data is already a pointer to char so casts to 'char *' should be meaningless. Remove them. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2010-10-28ext3: Cleanup ext3_setup_super()Namhyung Kim1-3/+3
Fix mount-count check to emit warning only if s_max_mnt_count is greater than 0 according to man tune2fs(8). Also removes unnecessary casts. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2010-10-28ext3/jbd: Avoid WARN() messages when failing to write the superblockDarrick J. Wong1-1/+23
This fixes a WARN backtrace in mark_buffer_dirty() that occurs during unmount when the underlying block device is removed. This bug has been seen on System Z when removing all paths from a multipath-backed ext3 mount; on System P when injecting enough PCI EEH errors to make the SCSI controller go offline; and similar warnings have been seen (and patched) with ext2/ext4. The super block update from a previous operation has marked the buffer as in error, and the flag has to be cleared before doing the update. Similar changes have been made to ext4 by commit 914258bf2cb22bf4336a1b1d90c551b4b11ca5aa. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Jan Kara <jack@suse.cz>
2010-10-04BKL: Remove BKL from ext3_put_super() and ext3_remount()Jan Blunck1-9/+0
The BKL lock is protecting the remounting against a potential call to ext3_put_super(). This could not happen, since this is protected by the s_umount rw semaphore of struct super_block. Therefore I think the BKL is protecting nothing here. Signed-off-by: Jan Blunck <jblunck@infradead.org> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2010-10-04BKL: Remove BKL from ext3 fill_super()Jan Blunck1-12/+1
The BKL is protecting nothing than two memory allocations here. Signed-off-by: Jan Blunck <jblunck@infradead.org> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2010-10-04BKL: Explicitly add BKL around get_sb/fill_superJan Blunck1-1/+8
This patch is a preparation necessary to remove the BKL from do_new_mount(). It explicitly adds calls to lock_kernel()/unlock_kernel() around get_sb/fill_super operations for filesystems that still uses the BKL. I've read through all the code formerly covered by the BKL inside do_kern_mount() and have satisfied myself that it doesn't need the BKL any more. do_kern_mount() is already called without the BKL when mounting the rootfs and in nfsctl. do_kern_mount() calls vfs_kern_mount(), which is called from various places without BKL: simple_pin_fs(), nfs_do_clone_mount() through nfs_follow_mountpoint(), afs_mntpt_do_automount() through afs_mntpt_follow_link(). Both later functions are actually the filesystems follow_link inode operation. vfs_kern_mount() is calling the specified get_sb function and lets the filesystem do its job by calling the given fill_super function. Therefore I think it is safe to push down the BKL from the VFS to the low-level filesystems get_sb/fill_super operation. [arnd: do not add the BKL to those file systems that already don't use it elsewhere] Signed-off-by: Jan Blunck <jblunck@infradead.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Christoph Hellwig <hch@infradead.org>
2010-09-10ext3/ext4: Factor out disk addressability checkPatrick J. LoPresti1-2/+2
As part of adding support for OCFS2 to mount huge volumes, we need to check that the sector_t and page cache of the system are capable of addressing the entire volume. An identical check already appears in ext3 and ext4. This patch moves the addressability check into its own function in fs/libfs.c and modifies ext3 and ext4 to invoke it. [Edited to -EINVAL instead of BUG_ON() for bad blocksize_bits -- Joel] Signed-off-by: Patrick LoPresti <lopresti@gmail.com> Cc: linux-ext4@vger.kernel.org Acked-by: Andreas Dilger <adilger@dilger.ca> Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-08-09convert ext3 to ->evict_inode()Al Viro1-13/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-07-21ext3: remove vestiges of nobh supportChristoph Hellwig1-13/+4
The nobh option was only supported for writeback mode, but given that all write paths (except mmapped writed) actually create buffer heads, it effectively was a no-op already. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2010-05-24quota: rename default quotactl methods to dquot_Christoph Hellwig1-10/+10
Follow the dquot_* style used elsewhere in dquot.c. [Jan Kara: Fixed up missing conversion of ext2] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2010-05-24quota: drop remount argument to ->quota_on and ->quota_offChristoph Hellwig1-6/+3
Remount handling has fully moved into the filesystem, so all this is superflous now. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2010-05-24quota: move unmount handling into the filesystemChristoph Hellwig1-0/+2
Currently the VFS calls into the quotactl interface for unmounting filesystems. This means filesystems with their own quota handling can't easily distinguish between user-space originating quotaoff and an unount. Instead move the responsibily of the unmount handling into the filesystem to be consistent with all other dquot handling. Note that we do call dquot_disable a lot later now, e.g. after a sync_filesystem. But this is fine as the quota code does all its writes via blockdev's mapping and that is synced even later. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2010-05-24quota: kill the vfs_dq_off and vfs_dq_quota_on_remount wrappersChristoph Hellwig1-5/+3
Instead of having wrappers in the VFS namespace export the dquot_suspend and dquot_resume helpers directly. Also rename vfs_quota_disable to dquot_disable while we're at it. [Jan Kara: Moved dquot_suspend to quotaops.h and made it inline] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2010-05-24quota: move remount handling into the filesystemChristoph Hellwig1-0/+11
Currently do_remount_sb calls into the dquot code to tell it about going from rw to ro and ro to rw. Move this code into the filesystem to not depend on the dquot code in the VFS - note ocfs2 already ignores these calls and handles remount by itself. This gets rid of overloading the quotactl calls and allows to unify the VFS and XFS codepaths in that area later. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2010-05-21ext3: make barrier options consistent with ext4Eric Sandeen1-7/+26
ext4 was updated to accept barrier/nobarrier mount options in addition to the older barrier=0/1. The barrier story is complex enough, we should help people by making the options the same at least, even if the defaults are different. This patch allows the barrier/nobarrier mount options for ext3, while keeping nobarrier the default. It also unconditionally displays barrier status in show_options, and prints a message at mount time if barriers are not enabled, just as ext4 does. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz>
2010-05-21ext3: init statistics after journal recovery v2Dmitry Monakhov1-23/+21
Currently block/inode/dir counters are initialized before journal was recovered. In fact after journal recovery this info will probably change which results in incorrect numbers returned from statfs(2). BUG:#15768 Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Jan Kara <jack@suse.cz>
2010-03-05dquot: cleanup dquot initialize routineChristoph Hellwig1-3/+2
Get rid of the initialize dquot operation - it is now always called from the filesystem and if a filesystem really needs it's own (which none currently does) it can just call into it's own routine directly. Rename the now static low-level dquot_initialize helper to __dquot_initialize and vfs_dq_init to dquot_initialize to have a consistent namespace. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2010-03-05dquot: cleanup dquot drop routineChristoph Hellwig1-2/+1
Get rid of the drop dquot operation - it is now always called from the filesystem and if a filesystem really needs it's own (which none currently does) it can just call into it's own routine directly. Rename the now static low-level dquot_drop helper to __dquot_drop and vfs_dq_drop to dquot_drop to have a consistent namespace. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2010-03-05dquot: move dquot drop responsibility into the filesystemChristoph Hellwig1-0/+2
Currently clear_inode calls vfs_dq_drop directly. This means we tie the quota code into the VFS. Get rid of that and make the filesystem responsible for the drop inside the ->clear_inode superblock operation. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2010-03-05dquot: cleanup dquot transfer routineChristoph Hellwig1-1/+0
Get rid of the transfer dquot operation - it is now always called from the filesystem and if a filesystem really needs it's own (which none currently does) it can just call into it's own routine directly. Rename the now static low-level dquot_transfer helper to __dquot_transfer and vfs_dq_transfer to dquot_transfer to have a consistent namespace, and make the new dquot_transfer return a normal negative errno value which all callers expect. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2010-03-05dquot: cleanup inode allocation / freeing routinesChristoph Hellwig1-2/+0
Get rid of the alloc_inode and free_inode dquot operations - they are always called from the filesystem and if a filesystem really needs their own (which none currently does) it can just call into it's own routine directly. Also get rid of the vfs_dq_alloc/vfs_dq_free wrappers and always call the lowlevel dquot_alloc_inode / dqout_free_inode routines directly, which now lose the number argument which is always 1. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2010-03-05dquot: cleanup space allocation / freeing routinesChristoph Hellwig1-2/+0
Get rid of the alloc_space, free_space, reserve_space, claim_space and release_rsv dquot operations - they are always called from the filesystem and if a filesystem really needs their own (which none currently does) it can just call into it's own routine directly. Move shared logic into the common __dquot_alloc_space, dquot_claim_space_nodirty and __dquot_free_space low-level methods, and rationalize the wrappers around it to move as much as possible code into the common block for CONFIG_QUOTA vs not. Also rename all these helpers to be named dquot_* instead of vfs_dq_*. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2010-03-05ext3: quota_write cross block boundary behaviourDmitry Monakhov1-35/+34
We always assume what dquot update result in changes in one data block But ext3_quota_write() function may handle cross block boundary writes In fact if this ever happen it will result in incorrect journal credits reservation. And later bug_on triggering. As soon this never happen the boundary cross loop is NOOP. In order to make things straight let's remove this loop and assert cross boundary condition. Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Jan Kara <jack@suse.cz>
2010-03-05ext3: trivial quota cleanupDmitry Monakhov1-54/+67
The patch is aimed to reorganize and simplify quota code a bit. Quota code is itself complex enouth, but we can make it more readable in some places: - Move quota option parsing to separate functions. - Simplify old-quota and journaled-quota mix check. Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Jan Kara <jack@suse.cz>
2010-03-05ext3: mount flags manipulation cleanupDmitry Monakhov1-27/+20
Replace intermediate EXT3_MOUNT_XXX flags manipulation to corresponding macro. Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Jan Kara <jack@suse.cz>
2010-02-05fix ext3/ext4 comment typo compain -> complainThadeu Lima de Souza Cascardo1-1/+1
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-12-23ext3: Replace lock/unlock_super() with an explicit lock for resizingEric Sandeen1-0/+1
Use a separate lock to protect s_groups_count and the other block group descriptors which get changed via an on-line resize operation, so we can stop overloading the use of lock_super(). Port of ext4 commit 32ed5058ce90024efcd811254b4b1de0468099df by Theodore Ts'o <tytso@mit.edu>. CC: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz>
2009-12-23ext3: Replace lock/unlock_super() with an explicit lock for the orphan listEric Sandeen1-0/+1
Use a separate lock to protect the orphan list, so we can stop overloading the use of lock_super(). Port of ext4 commit 3b9d4ed26680771295d904a6b83e88e620780893 by Theodore Ts'o <tytso@mit.edu>. CC: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz>
2009-12-23ext3: ext3_mark_recovery_complete() doesn't need to use lock_superEric Sandeen1-8/+0
The function ext3_mark_recovery_complete() is called from two call paths: either (a) while mounting the filesystem, in which case there's no danger of any other CPU calling write_super() until the mount is completed, and (b) while remounting the filesystem read-write, in which case the fs core has already locked the superblock. This also allows us to take out a very vile unlock_super()/lock_super() pair in ext3_remount(). Port of ext4 commit a63c9eb2ce6f5028da90f282798232c4f398ceb8 by Theodore Ts'o <tytso@mit.edu>. CC: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz>
2009-12-23ext3: Remove outdated comment about lock_super()Eric Sandeen1-8/+1
ext3_fill_super() is no longer called by read_super(), and it is no longer called with the superblock locked. The unlock_super()/lock_super() is no longer present, so this comment is entirely superfluous. Port of ext4 commit 32ed5058ce90024efcd811254b4b1de0468099df by Theodore Ts'o <tytso@mit.edu>. CC: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz>
2009-12-10ext3: Support for vfsv1 quota formatJan Kara1-6/+24
We just have to add proper mount options handling. The rest is handled by the generic quota code. CC: linux-ext4@vger.kernel.org Signed-off-by: Jan Kara <jack@suse.cz>
2009-12-10ext3: Unify log messages in ext3Alexey Fisher1-205/+227
Make messages produced by ext3 more unified. It should be easy to parse. dmesg before patch: [ 4893.684892] reservations ON [ 4893.684896] xip option not supported [ 4893.684964] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended dmesg after patch: [ 873.300792] EXT3-fs (loop0): using internal journaln [ 873.300796] EXT3-fs (loop0): mounted filesystem with writeback data mode [ 924.163657] EXT3-fs (loop0): error: can't find ext3 filesystem on dev loop0. [ 723.755642] EXT3-fs (loop0): error: bad blocksize 8192 [ 357.874687] EXT3-fs (loop0): error: no journal found. mounting ext3 over ext2? [ 873.300764] EXT3-fs (loop0): warning: maximal mount count reached, running e2fsck is recommended [ 924.163657] EXT3-fs (loop0): error: can't find ext3 filesystem on dev loop0. Signed-off-by: Alexey Fisher <bug-track@fisher-privat.net> Signed-off-by: Jan Kara <jack@suse.cz>
2009-12-10ext3: make "norecovery" an alias for "noload"Eric Sandeen1-0/+4
Users on the list recently complained about differences across filesystems w.r.t. how to mount without a journal replay. In the discussion it was noted that xfs's "norecovery" option is perhaps more descriptively accurate than "noload," so let's make that an alias for ext3. Also show this status in /proc/mounts Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz>
2009-12-10ext3: Don't update the superblock in ext3_statfs()Eric Sandeen1-2/+0
commit a71ce8c6c9bf269b192f352ea555217815cf027e updated ext3_statfs() to update the on-disk superblock counters, but modified this buffer directly without any journaling of the change. This is one of the accesses that was causing the crc errors in journal replay as seen in kernel.org bugzilla #14354. The modifications were originally to keep the sb "more" in sync, so that a readonly fsck of the device didn't flag this as an error (as often), but apparently e2fsprogs deals with this differently now, anyway. Based on Ted's patch for ext4, which was in turn based on my work on that bug and another preliminary patch... Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz>
2009-11-11ext3: Wait for proper transaction commit on fsyncJan Kara1-0/+2
We cannot rely on buffer dirty bits during fsync because pdflush can come before fsync is called and clear dirty bits without forcing a transaction commit. What we do is that we track which transaction has last changed the inode and which transaction last changed allocation and force it to disk on fsync. Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2009-10-13ext3: Don't update superblock write time when filesystem is read-onlyTheodore Ts'o1-1/+12
This avoids updating the superblock write time when we are mounting the root file system read/only but we need to replay the journal; at that point, for people who are east of GMT and who make their clock tick in localtime for Windows bug-for-bug compatibility, and this will cause e2fsck to complain and force a full file system check. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Jan Kara <jack@suse.cz>
2009-09-22const: make struct super_block::s_qcop constAlexey Dobriyan1-1/+1
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22const: make struct super_block::dq_op constAlexey Dobriyan1-1/+1
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-24ext3: Improve error message that changing journaling mode on remount is not possibleJan Kara1-13/+27
This patch makes the error message about changing journaling mode on remount more descriptive. Some people are going to hit this error now due to commit bbae8bcc49bc4d002221dab52c79a50a82e7cd1f if they configure a kernel to default to data=writeback mode. The problem happens if they have data=ordered set for the root filesystem in /etc/fstab but not in the kernel command line (and they don't use initrd). Their filesystem then gets mounted as data=writeback by kernel but then their boot fails because init scripts won't be able to remount the filesystem rw. Better error message will hopefully make it easier for them to find the error in their setup and bother us less with error reports :). Signed-off-by: Jan Kara <jack@suse.cz>
2009-06-24switch ext3 to inode->i_aclAl Viro1-16/+0
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-19block: rename CONFIG_LBD to CONFIG_LBDAFBartlomiej Zolnierkiewicz1-1/+1
Follow-up to "block: enable by default support for large devices and files on 32-bit archs". Rename CONFIG_LBD to CONFIG_LBDAF to: - allow update of existing [def]configs for "default y" change - reflect that it is used also for large files support nowadays Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>