| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Out of memory should not be considered as critical errors; so replace
ext4_error() with ext4_warnig().
Signed-off-by: Wang Shilong <wshilong@ddn.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
|
|
With commit 044e6e3d74a3: "ext4: don't update checksum of new
initialized bitmaps" the buffer valid bit will get set without
actually setting up the checksum for the allocation bitmap, since the
checksum will get calculated once we actually allocate an inode or
block.
If we are doing this, then we need to (re-)check the verified bit
after we take the block group lock. Otherwise, we could race with
another process reading and verifying the bitmap, which would then
complain about the checksum being invalid.
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1780137
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
|
|
The bg_flags field in the block group descripts is only valid if the
uninit_bg or metadata_csum feature is enabled. We were not
consistently looking at this field; fix this.
Also block group #0 must never have uninitialized allocation bitmaps,
or need to be zeroed, since that's where the root inode, and other
special inodes are set up. Check for these conditions and mark the
file system as corrupted if they are detected.
This addresses CVE-2018-10876.
https://bugzilla.kernel.org/show_bug.cgi?id=199403
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
|
|
Regardless of whether the flex_bg feature is set, we should always
check to make sure the bits we are setting in the block bitmap are
within the block group bounds.
https://bugzilla.kernel.org/show_bug.cgi?id=199865
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
|
|
There are still some cases that we missed to set
block bitmaps corrupted bit properly:
1) block bitmap number is wrong.
2) failed to read block bitmap due to disk errors.
3) double free block bitmaps..
4) some mismatch check with bitmaps vs buddy information.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: Wang Shilong <wshilong@ddn.com>
Reviewed-by: Liu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
|
|
Since there are many places to set inode/block bitmap
corrupt bit, add a new helper for it, which will make
codes more clear.
Signed-off-by: Wang Shilong <wshilong@ddn.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
|
|
Currently in ext4_valid_block_bitmap() we expect the bitmap to be
positioned anywhere between 0 and s_blocksize clusters, but that's
wrong because the bitmap can be placed anywhere in the block group. This
causes false positives when validating bitmaps on perfectly valid file
system layouts. Fix it by checking whether the bitmap is within the group
boundary.
The problem can be reproduced using the following
mkfs -t ext3 -E stride=256 /dev/vdb1
mount /dev/vdb1 /mnt/test
cd /mnt/test
wget https://cdn.kernel.org/pub/linux/kernel/v4.x/linux-4.16.3.tar.xz
tar xf linux-4.16.3.tar.xz
This will result in the warnings in the logs
EXT4-fs error (device vdb1): ext4_validate_block_bitmap:399: comm tar: bg 84: block 2774529: invalid block bitmap
[ Changed slightly for clarity and to not drop a overflow test -- TYT ]
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reported-by: Ilya Dryomov <idryomov@gmail.com>
Fixes: 7dac4a1726a9 ("ext4: add validity checks for bitmap block numbers")
Cc: stable@vger.kernel.org
|
|
An privileged attacker can cause a crash by mounting a crafted ext4
image which triggers a out-of-bounds read in the function
ext4_valid_block_bitmap() in fs/ext4/balloc.c.
This issue has been assigned CVE-2018-1093.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199181
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1560782
Reported-by: Wen Xu <wen.xu@gatech.edu>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
|
|
When reading the inode or block allocation bitmap, if the bitmap needs
to be initialized, do not update the checksum in the block group
descriptor. That's because we're not set up to journal those changes.
Instead, just set the verified bit on the bitmap block, so that it's
not necessary to validate the checksum.
When a block or inode allocation actually happens, at that point the
checksum will be calculated, and update of the bg descriptor block
will be properly journalled.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
|
|
We could use 'sbi' instead of 'EXT4_SB(sb)' to make code more elegant.
Signed-off-by: Jun Piao <piaojun@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
|
|
Pull ext4 updates from Ted Ts'o:
- Add support for online resizing of file systems with bigalloc
- Fix a two data corruption bugs involving DAX, as well as a corruption
bug after a crash during a racing fallocate and delayed allocation.
- Finally, a number of cleanups and optimizations.
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: improve smp scalability for inode generation
ext4: add support for online resizing with bigalloc
ext4: mention noload when recovering on read-only device
Documentation: fix little inconsistencies
ext4: convert timers to use timer_setup()
jbd2: convert timers to use timer_setup()
ext4: remove duplicate extended attributes defs
ext4: add ext4_should_use_dax()
ext4: add sanity check for encryption + DAX
ext4: prevent data corruption with journaling + DAX
ext4: prevent data corruption with inline data + DAX
ext4: fix interaction between i_size, fallocate, and delalloc after a crash
ext4: retry allocations conservatively
ext4: Switch to iomap for SEEK_HOLE / SEEK_DATA
ext4: Add iomap support for inline data
iomap: Add IOMAP_F_DATA_INLINE flag
iomap: Switch from blkno to disk offset
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Now that we no longer try to reserve metadata blocks for delayed
allocations (which tended to overestimate the required number of
blocks significantly), we really don't need retry allocations when the
disk is very full as aggressively any more.
The only time when it makes sense to retry an allocation is if we have
freshly deleted blocks that will only become available after a
transaction commit. And if we lose that race, it's not worth it to
try more than once.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Pull ext4 updates from Ted Ts'o:
"The major change this cycle is deleting ext4's copy of the file system
encryption code and switching things over to using the copies in
fs/crypto. I've updated the MAINTAINERS file to add an entry for
fs/crypto listing Jaeguk Kim and myself as the maintainers.
There are also a number of bug fixes, most notably for some problems
found by American Fuzzy Lop (AFL) courtesy of Vegard Nossum. Also
fixed is a writeback deadlock detected by generic/130, and some
potential races in the metadata checksum code"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (21 commits)
ext4: verify extent header depth
ext4: short-cut orphan cleanup on error
ext4: fix reference counting bug on block allocation error
MAINTAINRES: fs-crypto maintainers update
ext4 crypto: migrate into vfs's crypto engine
ext2: fix filesystem deadlock while reading corrupted xattr block
ext4: fix project quota accounting without quota limits enabled
ext4: validate s_reserved_gdt_blocks on mount
ext4: remove unused page_idx
ext4: don't call ext4_should_journal_data() on the journal inode
ext4: Fix WARN_ON_ONCE in ext4_commit_super()
ext4: fix deadlock during page writeback
ext4: correct error value of function verifying dx checksum
ext4: avoid modifying checksum fields directly during checksum verification
ext4: check for extents that wrap around
jbd2: make journal y2038 safe
jbd2: track more dependencies on transaction commit
jbd2: move lockdep tracking to journal_s
jbd2: move lockdep instrumentation for jbd2 handles
ext4: respect the nobarrier mount option in nojournal mode
...
|
|
If s_reserved_gdt_blocks is extremely large, it's possible for
ext4_init_block_bitmap(), which is called when ext4 sets up an
uninitialized block bitmap, to corrupt random kernel memory. Add the
same checks which e2fsck has --- it must never be larger than
blocksize / sizeof(__u32) --- and then add a backup check in
ext4_init_block_bitmap() in case the superblock gets modified after
the file system is mounted.
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
|
|
If there are no pending blocks to be released after a commit, forcing
a journal commit has no hope of helping. It's possible that a commit
had just completed, so if there are now free blocks available for
allocation, it's worth retrying the commit.
Reported-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
This has submit_bh users pass in the operation and flags separately,
so submit_bh_wbc can setup the bio op and bi_rw flags on the bio that
is submitted.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
When there are blocks to free in the running transaction, block
allocator can return ENOSPC although the filesystem has some blocks to
free. We use ext4_should_retry_alloc() to force commit of the current
transaction and return whether anything was committed so that it makes
sense to retry the allocation. However the transaction may get committed
after block allocation fails but before we call
ext4_should_retry_alloc(). So ext4_should_retry_alloc() returns false
because there is nothing to commit and we wrongly return ENOSPC.
Fix the race by unconditionally returning 1 from ext4_should_retry_alloc()
when we tried to commit a transaction. This should not add any
unnecessary retries since we had a transaction running a while ago when
trying to allocate blocks and we want to retry the allocation once that
transaction has committed anyway.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
When block group checksum is wrong, we call ext4_error() while holding
group spinlock from ext4_init_block_bitmap() or
ext4_init_inode_bitmap() which results in scheduling while in atomic.
Fix the issue by calling ext4_error() later after dropping the spinlock.
CC: stable@vger.kernel.org
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Make the bitmap reaading routines return real error codes (EIO,
EFSCORRUPTED, EFSBADCRC) which can then be reflected back to
userspace for more precise diagnosis work.
In particular, this means that mballoc no longer claims that we're out
of memory if the block bitmaps become corrupt.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Create separate predicate functions to test/set/clear feature flags,
thereby replacing the wordy old macros. Furthermore, clean out the
places where we open-coded feature tests.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Instead of overloading EIO for CRC errors and corrupt structures,
return the same error codes that XFS returns for the same issues.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
If we want to rely on the buffer_verified() flag of the block bitmap
buffer, we have to set it consistently. However currently if we're
initializing uninitialized block bitmap in
ext4_read_block_bitmap_nowait() we're not going to set buffer verified
at all.
We can do this by simply setting the flag on the buffer, but I think
it's actually better to run ext4_validate_block_bitmap() to make sure
that what we did in the ext4_init_block_bitmap() is right.
So run ext4_validate_block_bitmap() even after the block bitmap
initialization. Also bail out early from ext4_validate_block_bitmap() if
we see corrupt bitmap, since we already know it's corrupt and we do not
need to verify that.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
This is a leftover of commit 71d4f7d032149b935a26eb3ff85c6c837f3714e1
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
|
|
Remove unused header files and header files which are included in
ext4.h.
Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Error report likely result in IO so it is bad idea to do it from
atomic context.
This patch should fix following issue:
BUG: sleeping function called from invalid context at include/linux/buffer_head.h:349
in_atomic(): 1, irqs_disabled(): 0, pid: 137, name: kworker/u128:1
5 locks held by kworker/u128:1/137:
#0: ("writeback"){......}, at: [<ffffffff81085618>] process_one_work+0x228/0x4d0
#1: ((&(&wb->dwork)->work)){......}, at: [<ffffffff81085618>] process_one_work+0x228/0x4d0
#2: (jbd2_handle){......}, at: [<ffffffff81242622>] start_this_handle+0x712/0x7b0
#3: (&ei->i_data_sem){......}, at: [<ffffffff811fa387>] ext4_map_blocks+0x297/0x430
#4: (&(&bgl->locks[i].lock)->rlock){......}, at: [<ffffffff811f3180>] ext4_read_block_bitmap_nowait+0x5d0/0x630
CPU: 3 PID: 137 Comm: kworker/u128:1 Not tainted 3.17.0-rc2-00184-g82752e4 #165
Hardware name: Intel Corporation W2600CR/W2600CR, BIOS SE5C600.86B.99.99.x028.061320111235 06/13/2011
Workqueue: writeback bdi_writeback_workfn (flush-1:0)
0000000000000411 ffff880813777288 ffffffff815c7fdc ffff880813777288
ffff880813a8bba0 ffff8808137772a8 ffffffff8108fb30 ffff880803e01e38
ffff880803e01e38 ffff8808137772c8 ffffffff811a8d53 ffff88080ecc6000
Call Trace:
[<ffffffff815c7fdc>] dump_stack+0x51/0x6d
[<ffffffff8108fb30>] __might_sleep+0xf0/0x100
[<ffffffff811a8d53>] __sync_dirty_buffer+0x43/0xe0
[<ffffffff811a8e03>] sync_dirty_buffer+0x13/0x20
[<ffffffff8120f581>] ext4_commit_super+0x1d1/0x230
[<ffffffff8120fa03>] save_error_info+0x23/0x30
[<ffffffff8120fd06>] __ext4_error+0xb6/0xd0
[<ffffffff8120f260>] ? ext4_group_desc_csum+0x140/0x190
[<ffffffff811f2d8c>] ext4_read_block_bitmap_nowait+0x1dc/0x630
[<ffffffff8122e23a>] ext4_mb_init_cache+0x21a/0x8f0
[<ffffffff8113ae95>] ? lru_cache_add+0x55/0x60
[<ffffffff8112e16c>] ? add_to_page_cache_lru+0x6c/0x80
[<ffffffff8122eaa0>] ext4_mb_init_group+0x190/0x280
[<ffffffff8122ec51>] ext4_mb_good_group+0xc1/0x190
[<ffffffff8123309a>] ext4_mb_regular_allocator+0x17a/0x410
[<ffffffff8122c821>] ? ext4_mb_use_preallocated+0x31/0x380
[<ffffffff81233535>] ? ext4_mb_new_blocks+0x205/0x8e0
[<ffffffff8116ed5c>] ? kmem_cache_alloc+0xfc/0x180
[<ffffffff812335b0>] ext4_mb_new_blocks+0x280/0x8e0
[<ffffffff8116f2c4>] ? __kmalloc+0x144/0x1c0
[<ffffffff81221797>] ? ext4_find_extent+0x97/0x320
[<ffffffff812257f4>] ext4_ext_map_blocks+0xbc4/0x1050
[<ffffffff811fa387>] ? ext4_map_blocks+0x297/0x430
[<ffffffff811fa3ab>] ext4_map_blocks+0x2bb/0x430
[<ffffffff81200e43>] ? ext4_init_io_end+0x23/0x50
[<ffffffff811feb44>] ext4_writepages+0x564/0xaf0
[<ffffffff815cde3b>] ? _raw_spin_unlock+0x2b/0x40
[<ffffffff810ac7bd>] ? lock_release_non_nested+0x2fd/0x3c0
[<ffffffff811a009e>] ? writeback_sb_inodes+0x10e/0x490
[<ffffffff811a009e>] ? writeback_sb_inodes+0x10e/0x490
[<ffffffff811377e3>] do_writepages+0x23/0x40
[<ffffffff8119c8ce>] __writeback_single_inode+0x9e/0x280
[<ffffffff811a026b>] writeback_sb_inodes+0x2db/0x490
[<ffffffff811a0664>] wb_writeback+0x174/0x2d0
[<ffffffff810ac359>] ? lock_release_holdtime+0x29/0x190
[<ffffffff811a0863>] wb_do_writeback+0xa3/0x200
[<ffffffff811a0a40>] bdi_writeback_workfn+0x80/0x230
[<ffffffff81085618>] ? process_one_work+0x228/0x4d0
[<ffffffff810856cd>] process_one_work+0x2dd/0x4d0
[<ffffffff81085618>] ? process_one_work+0x228/0x4d0
[<ffffffff81085c1d>] worker_thread+0x35d/0x460
[<ffffffff810858c0>] ? process_one_work+0x4d0/0x4d0
[<ffffffff810858c0>] ? process_one_work+0x4d0/0x4d0
[<ffffffff8108a885>] kthread+0xf5/0x100
[<ffffffff810990e5>] ? local_clock+0x25/0x30
[<ffffffff8108a790>] ? __init_kthread_worker+0x70/0x70
[<ffffffff815ce2ac>] ret_from_fork+0x7c/0xb0
[<ffffffff8108a790>] ? __init_kthread_work
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
|
|
The EXT4_STATE_DELALLOC_RESERVED flag was originally implemented
because it was too hard to make sure the mballoc and get_block flags
could be reliably passed down through all of the codepaths that end up
calling ext4_mb_new_blocks().
Since then, we have mb_flags passed down through most of the code
paths, so getting rid of EXT4_STATE_DELALLOC_RESERVED isn't as tricky
as it used to.
This commit plumbs in the last of what is required, and then adds a
WARN_ON check to make sure we haven't missed anything. If this passes
a full regression test run, we can then drop
EXT4_STATE_DELALLOC_RESERVED.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
|
|
Commit 27dd43854227b ("ext4: introduce reserved space") reserves 2% of
the file system space to make sure metadata allocations will always
succeed. Given that, tracking the reservation of metadata blocks is
no longer necessary.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
We should decrement free clusters counter when block bitmap is marked
as corrupt and free inodes counter when the allocation bitmap is
marked as corrupt to avoid misunderstanding due to incorrect available
size in statfs result. User can get immediately ENOSPC error from
write begin without reaching for the writepages.
Cc: Darrick J. Wong<darrick.wong@oracle.com>
Reported-by: Amit Sahrawat <amit.sahrawat83@gmail.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
|
|
I have been running make namespacecheck to look for unneeded globals, and
found these in ext4.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
On a bigalloc,^flex_bg filesystem, the ext4_valid_block_bitmap
function fails to convert from blocks to clusters when spot-checking
the validity of the bitmap block that we've just read from disk. This
causes ext4 to think that the bitmap is garbage, which results in the
block group being taken offline when it's not necessary. Add in the
necessary EXT4_B2C() calls to perform the conversions.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
The ext4_bg_has_super() function doesn't know about the new rules for
where backup superblocks go on a sparse_super2 filesystem. Therefore,
block bitmap initialization doesn't know that it shouldn't reserve
space for backups in groups that are never going to contain backups.
The result of this is e2fsck complaining about the block bitmap being
incorrect (fortunately not in a way that results in cross-linked
files), so fix the whole thing.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
With bigalloc enabled we must use EXT4_CLUSTERS_PER_GROUP() instead of
EXT4_BLOCKS_PER_GROUP() otherwise we will go beyond the allocated buffer.
$ mount -t ext4 /dev/vde /vde
[ 70.573993] EXT4-fs DEBUG (fs/ext4/mballoc.c, 2346): ext4_mb_alloc_groupinfo:
[ 70.575174] allocated s_groupinfo array for 1 meta_bg's
[ 70.576172] EXT4-fs DEBUG (fs/ext4/super.c, 2092): ext4_check_descriptors:
[ 70.576972] Checking group descriptorsBUG: unable to handle kernel paging request at ffff88006ab56000
[ 72.463686] IP: [<ffffffff81394eb9>] __bitmap_weight+0x2a/0x7f
[ 72.464168] PGD 295e067 PUD 2961067 PMD 7fa8e067 PTE 800000006ab56060
[ 72.464738] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
[ 72.465139] Modules linked in:
[ 72.465402] CPU: 1 PID: 3560 Comm: mount Tainted: G W 3.14.0-rc2-00069-ge57bce1 #60
[ 72.466079] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 72.466505] task: ffff88007ce6c8a0 ti: ffff88006b7f0000 task.ti: ffff88006b7f0000
[ 72.466505] RIP: 0010:[<ffffffff81394eb9>] [<ffffffff81394eb9>] __bitmap_weight+0x2a/0x7f
[ 72.466505] RSP: 0018:ffff88006b7f1c00 EFLAGS: 00010206
[ 72.466505] RAX: 0000000000000000 RBX: 000000000000050a RCX: 0000000000000040
[ 72.466505] RDX: 0000000000000000 RSI: 0000000000080000 RDI: 0000000000000000
[ 72.466505] RBP: ffff88006b7f1c28 R08: 0000000000000002 R09: 0000000000000000
[ 72.466505] R10: 000000000000babe R11: 0000000000000400 R12: 0000000000080000
[ 72.466505] R13: 0000000000000200 R14: 0000000000002000 R15: ffff88006ab55000
[ 72.466505] FS: 00007f43ba1fa840(0000) GS:ffff88007f800000(0000) knlGS:0000000000000000
[ 72.466505] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 72.466505] CR2: ffff88006ab56000 CR3: 000000006b7e6000 CR4: 00000000000006e0
[ 72.466505] Stack:
[ 72.466505] ffff88006ab65000 0000000000000000 0000000000000000 0000000000010000
[ 72.466505] ffff88006ab6f400 ffff88006b7f1c58 ffffffff81396bb8 0000000000010000
[ 72.466505] 0000000000000000 ffff88007b869a90 ffff88006a48a000 ffff88006b7f1c70
[ 72.466505] Call Trace:
[ 72.466505] [<ffffffff81396bb8>] memweight+0x5f/0x8a
[ 72.466505] [<ffffffff811c3b19>] ext4_count_free+0x13/0x21
[ 72.466505] [<ffffffff811c396c>] ext4_count_free_clusters+0xdb/0x171
[ 72.466505] [<ffffffff811e3bdd>] ext4_fill_super+0x117c/0x28ef
[ 72.466505] [<ffffffff81391569>] ? vsnprintf+0x1c7/0x3f7
[ 72.466505] [<ffffffff8114d8dc>] mount_bdev+0x145/0x19c
[ 72.466505] [<ffffffff811e2a61>] ? ext4_calculate_overhead+0x2a1/0x2a1
[ 72.466505] [<ffffffff811dab1d>] ext4_mount+0x15/0x17
[ 72.466505] [<ffffffff8114e3aa>] mount_fs+0x67/0x150
[ 72.466505] [<ffffffff811637ea>] vfs_kern_mount+0x64/0xde
[ 72.466505] [<ffffffff81165d19>] do_mount+0x6fe/0x7f5
[ 72.466505] [<ffffffff81126cc8>] ? strndup_user+0x3a/0xd9
[ 72.466505] [<ffffffff8116604b>] SyS_mount+0x85/0xbe
[ 72.466505] [<ffffffff81619e90>] tracesys+0xdd/0xe2
[ 72.466505] Code: c3 89 f0 b9 40 00 00 00 55 99 48 89 e5 41 57 f7 f9 41 56 49 89 ff 41 55 45 31 ed 41 54 41 89 f4 53 31 db 41 89 c6 45 39 ee 7e 10 <4b> 8b 3c ef 49 ff c5 e8 bf ff ff ff 01 c3 eb eb 31 c0 45 85 f6
[ 72.466505] RIP [<ffffffff81394eb9>] __bitmap_weight+0x2a/0x7f
[ 72.466505] RSP <ffff88006b7f1c00>
[ 72.466505] CR2: ffff88006ab56000
[ 72.466505] ---[ end trace 7d051a08ae138573 ]---
Killed
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
A bg that's been flagged "corrupt" by definition has no free blocks,
so that the allocator won't be tempted to use the damaged bg.
Therefore, we shouldn't count the clusters in the damaged group when
calculating free counts.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
|
|
If the group descriptor fails validation, mark the whole blockgroup
corrupt so that the inode/block allocators skip this group. The
previous approach takes the risk of writing to a damaged group
descriptor; hopefully it was never the case that the [ib]bitmap fields
pointed to another valid block and got dirtied, since the memset would
fill the page with 1s.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
When we notice a block-bitmap corruption (because of device failure or
something else), we should mark this group as corrupt and prevent
further block allocations/deallocations from it. Currently, we end up
generating one error message for every block in the bitmap. This
potentially could make the system unstable as noticed in some
bugs. With this patch, the error will be printed only the first time
and mark the entire block group as corrupted. This prevents future
access allocations/deallocations from it.
Also tested by corrupting the block
bitmap and forcefully introducing the mb_free_blocks error:
(1) create a largefile (2Gb)
$ dd if=/dev/zero of=largefile oflag=direct bs=10485760 count=200
(2) umount filesystem. use dumpe2fs to see which block-bitmaps
are in use by largefile and note their block numbers
(3) use dd to zero-out the used block bitmaps
$ dd if=/dev/zero of=/dev/hdc4 bs=4096 seek=14 count=8 oflag=direct
(4) mount the FS and delete the largefile.
(5) recreate the largefile. verify that the new largefile does not
get any blocks from the groups marked as bad.
Without the patch, we will see mb_free_blocks error for each bit in
each zero'ed out bitmap at (4). With the patch, we only see the error
once per blockgroup:
[ 309.706803] EXT4-fs error (device sdb4): ext4_mb_generate_buddy:735: group 15: 32768 clusters in bitmap, 0 in gd. blk grp corrupted.
[ 309.720824] EXT4-fs error (device sdb4): ext4_mb_generate_buddy:735: group 14: 32768 clusters in bitmap, 0 in gd. blk grp corrupted.
[ 309.732858] EXT4-fs error (device sdb4) in ext4_free_blocks:4802: IO failure
[ 309.748321] EXT4-fs error (device sdb4): ext4_mb_generate_buddy:735: group 13: 32768 clusters in bitmap, 0 in gd. blk grp corrupted.
[ 309.760331] EXT4-fs error (device sdb4) in ext4_free_blocks:4802: IO failure
[ 309.769695] EXT4-fs error (device sdb4): ext4_mb_generate_buddy:735: group 12: 32768 clusters in bitmap, 0 in gd. blk grp corrupted.
[ 309.781721] EXT4-fs error (device sdb4) in ext4_free_blocks:4802: IO failure
[ 309.798166] EXT4-fs error (device sdb4): ext4_mb_generate_buddy:735: group 11: 32768 clusters in bitmap, 0 in gd. blk grp corrupted.
[ 309.810184] EXT4-fs error (device sdb4) in ext4_free_blocks:4802: IO failure
[ 309.819532] EXT4-fs error (device sdb4): ext4_mb_generate_buddy:735: group 10: 32768 clusters in bitmap, 0 in gd. blk grp corrupted.
Google-Bug-Id: 7258357
[darrick.wong@oracle.com]
Further modifications (by Darrick) to make more obvious that this corruption
bit applies to blocks only. Set the corruption flag if the block group bitmap
verification fails.
Original-author: Aditya Kali <adityakali@google.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
The block_group parameter to ext4_validate_block_bitmap is both used
as a ext4_group_t inside the function and the same type is passed in
by all callers. We might as well use the typedef consistently instead
of open-coding the 'unsigned int'.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
The block bitmap verification code assumes that calling ext4_error()
either panics the system or makes the fs readonly. However, this is
not always true: when 'errors=continue' is specified, an error is
printed but we don't return any indication of error to the caller,
which is (probably) the block allocator, which pretends that the crud
we read in off the disk is a usable bitmap. Yuck.
A block bitmap that fails the check should at least return no bitmap
to the caller. The block allocator should be told to go look in a
different group, but that's a separate issue.
The easiest way to reproduce this is to modify bg_block_bitmap (on a
^flex_bg fs) to point to a block outside the block group; or you can
create a metadata_csum filesystem and zero out the block bitmaps.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
The function ext4_get_group_number() was introduced as an optimization
in commit bd86298e60b8. Unfortunately, this commit incorrectly
calculate the group number for file systems with a 1k block size (when
s_first_data_block is 1 instead of zero). This could cause the
following kernel BUG:
[ 568.877799] ------------[ cut here ]------------
[ 568.877833] kernel BUG at fs/ext4/mballoc.c:3728!
[ 568.877840] Oops: Exception in kernel mode, sig: 5 [#1]
[ 568.877845] SMP NR_CPUS=32 NUMA pSeries
[ 568.877852] Modules linked in: binfmt_misc
[ 568.877861] CPU: 1 PID: 3516 Comm: fs_mark Not tainted 3.10.0-03216-g7c6809f-dirty #1
[ 568.877867] task: c0000001fb0b8000 ti: c0000001fa954000 task.ti: c0000001fa954000
[ 568.877873] NIP: c0000000002f42a4 LR: c0000000002f4274 CTR: c000000000317ef8
[ 568.877879] REGS: c0000001fa956ed0 TRAP: 0700 Not tainted (3.10.0-03216-g7c6809f-dirty)
[ 568.877884] MSR: 8000000000029032 <SF,EE,ME,IR,DR,RI> CR: 24000428 XER: 00000000
[ 568.877902] SOFTE: 1
[ 568.877905] CFAR: c0000000002b5464
[ 568.877908]
GPR00: 0000000000000001 c0000001fa957150 c000000000c6a408 c0000001fb588000
GPR04: 0000000000003fff c0000001fa9571c0 c0000001fa9571c4 000138098c50625f
GPR08: 1301200000000000 0000000000000002 0000000000000001 0000000000000000
GPR12: 0000000024000422 c00000000f33a300 0000000000008000 c0000001fa9577f0
GPR16: c0000001fb7d0100 c000000000c29190 c0000000007f46e8 c000000000a14672
GPR20: 0000000000000001 0000000000000008 ffffffffffffffff 0000000000000000
GPR24: 0000000000000100 c0000001fa957278 c0000001fdb2bc78 c0000001fa957288
GPR28: 0000000000100100 c0000001fa957288 c0000001fb588000 c0000001fdb2bd10
[ 568.877993] NIP [c0000000002f42a4] .ext4_mb_release_group_pa+0xec/0x1c0
[ 568.877999] LR [c0000000002f4274] .ext4_mb_release_group_pa+0xbc/0x1c0
[ 568.878004] Call Trace:
[ 568.878008] [c0000001fa957150] [c0000000002f4274] .ext4_mb_release_group_pa+0xbc/0x1c0 (unreliable)
[ 568.878017] [c0000001fa957200] [c0000000002fb070] .ext4_mb_discard_lg_preallocations+0x394/0x444
[ 568.878025] [c0000001fa957340] [c0000000002fb45c] .ext4_mb_release_context+0x33c/0x734
[ 568.878032] [c0000001fa957440] [c0000000002fbcf8] .ext4_mb_new_blocks+0x4a4/0x5f4
[ 568.878039] [c0000001fa957510] [c0000000002ef56c] .ext4_ext_map_blocks+0xc28/0x1178
[ 568.878047] [c0000001fa957640] [c0000000002c1a94] .ext4_map_blocks+0x2c8/0x490
[ 568.878054] [c0000001fa957730] [c0000000002c536c] .ext4_writepages+0x738/0xc60
[ 568.878062] [c0000001fa957950] [c000000000168a78] .do_writepages+0x5c/0x80
[ 568.878069] [c0000001fa9579d0] [c00000000015d1c4] .__filemap_fdatawrite_range+0x88/0xb0
[ 568.878078] [c0000001fa957aa0] [c00000000015d23c] .filemap_write_and_wait_range+0x50/0xfc
[ 568.878085] [c0000001fa957b30] [c0000000002b8edc] .ext4_sync_file+0x220/0x3c4
[ 568.878092] [c0000001fa957be0] [c0000000001f849c] .vfs_fsync_range+0x64/0x80
[ 568.878098] [c0000001fa957c70] [c0000000001f84f0] .vfs_fsync+0x38/0x4c
[ 568.878105] [c0000001fa957d00] [c0000000001f87f4] .do_fsync+0x54/0x90
[ 568.878111] [c0000001fa957db0] [c0000000001f8894] .SyS_fsync+0x28/0x3c
[ 568.878120] [c0000001fa957e30] [c000000000009c88] syscall_exit+0x0/0x7c
[ 568.878125] Instruction dump:
[ 568.878130] 60000000 813d0034 81610070 38000000 7f8b4800 419e001c 813f007c 7d2bfe70
[ 568.878144] 7d604a78 7c005850 54000ffe 7c0007b4 <0b000000> e8a10076 e87f0090 7fa4eb78
[ 568.878160] ---[ end trace 594d911d9654770b ]---
In addition fix the STD_GROUP optimization so that it works for
bigalloc file systems as well.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reported-by: Li Zhong <lizhongfs@gmail.com>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Cc: stable@vger.kernel.org # 3.10
|
|
The test_root() function could potentially loop forever due to
overflow issues. So rewrite test_root() to avoid this issue; as a
bonus, it is 38% faster when benchmarked via a test loop:
int main(int argc, char **argv)
{
int i;
for (i = 0; i < 1 << 24; i++) {
if (test_root(i, 7))
printf("%d\n", i);
}
}
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
As Dave Chinner pointed out at the 2013 LSF/MM workshop, it's
important that metadata I/O requests are marked as such to avoid
priority inversions caused by I/O bandwidth throttling.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Currently in ENOSPC condition when writing into unwritten space, or
punching a hole, we might need to split the extent and grow extent tree.
However since we can not allocate any new metadata blocks we'll have to
zero out unwritten part of extent or punched out part of extent, or in
the worst case return ENOSPC even though use actually does not allocate
any space.
Also in delalloc path we do reserve metadata and data blocks for the
time we're going to write out, however metadata block reservation is
very tricky especially since we expect that logical connectivity implies
physical connectivity, however that might not be the case and hence we
might end up allocating more metadata blocks than previously reserved.
So in future, metadata reservation checks should be removed since we can
not assure that we do not under reserve.
And this is where reserved space comes into the picture. When mounting
the file system we slice off a little bit of the file system space (2%
or 4096 clusters, whichever is smaller) which can be then used for the
cases mentioned above to prevent costly zeroout, or unexpected ENOSPC.
The number of reserved clusters can be set via sysfs, however it can
never be bigger than number of free clusters in the file system.
Note that this patch fixes the failure of xfstest 274 as expected.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
|
|
Currently on many places in ext4 we're using
ext4_get_group_no_and_offset() even though we're only interested in
knowing the block group of the particular block, not the offset within
the block group so we can use more efficient way to compute block
group.
This patch introduces ext4_get_group_number() which computes block
group for a given block much more efficiently. Use this function
instead of ext4_get_group_no_and_offset() everywhere where we're only
interested in knowing the block group.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Currently in when getting the block group number for a particular
block in ext4_block_in_group() we're using
ext4_get_group_no_and_offset() which uses do_div() to get the block
group and the remainer which is offset within the group.
We don't need all of that in ext4_block_in_group() as we only need to
figure out the group number.
This commit changes ext4_block_in_group() to calculate group number
directly. This shows as a big improvement with regards to cpu
utilization. Measuring fallocate -l 15T on fresh file system with perf
showed that 23% of cpu time was spend in the
ext4_get_group_no_and_offset(). With this change it completely
disappears from the list only bumping the occurrence of
ext4_init_block_bitmap() which is the biggest user of
ext4_block_in_group() by 4%. As the result of this change on my system
the fallocate call was approx. 10% faster.
However since there is '-g' option in mkfs which allow us setting
different groups size (mostly for developers) I've introduced new per
file system flag whether we have a standard block group size or
not. The flag is used to determine whether we can use the bit shift
optimization or not.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
We're using macro EXT4_B2C() to convert number of blocks to number of
clusters for bigalloc file systems. However, we should be using
EXT4_NUM_B2C().
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
|
|
ext4_has_free_clusters() should tell us whether there is enough free
clusters to allocate, however number of free clusters in the file system
is converted to blocks using EXT4_C2B() which is not only wrong use of
the macro (we should have used EXT4_NUM_B2C) but it's also completely
wrong concept since everything else is in cluster units.
Moreover when calculating number of root clusters we should be using
macro EXT4_NUM_B2C() instead of EXT4_B2C() otherwise the result might be
off by one. However r_blocks_count should always be a multiple of the
cluster ratio so doing a plain bit shift should be enough here. We
avoid using EXT4_B2C() because it's confusing.
As a result of the first problem number of free clusters is much bigger
than it should have been and ext4_has_free_clusters() would return 1 even
if there is really not enough free clusters available.
Fix this by removing the EXT4_C2B() conversion of free clusters and
using bit shift when calculating number of root clusters. This bug
affects number of xfstests tests covering file system ENOSPC situation
handling. With this patch most of the ENOSPC problems with bigalloc file
system disappear, especially the errors caused by delayed allocation not
having enough space when the actual allocation is finally requested.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
|
|
Validate the bh pointer before using it, since
ext4_read_block_bitmap_nowait() might return NULL.
I've seen this in fsfuzz testing.
EXT4-fs error (device loop0): ext4_read_block_bitmap_nowait:385: comm touch: Cannot get buffer for block bitmap - block_group = 0, block_bitmap = 3925999616
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffff8121de25>] ext4_wait_block_bitmap+0x25/0xe0
...
Call Trace:
[<ffffffff8121e1e5>] ext4_read_block_bitmap+0x35/0x60
[<ffffffff8125e9c6>] ext4_free_blocks+0x236/0xb80
[<ffffffff811d0d36>] ? __getblk+0x36/0x70
[<ffffffff811d0a5f>] ? __find_get_block+0x8f/0x210
[<ffffffff81191ef3>] ? kmem_cache_free+0x33/0x140
[<ffffffff812678e5>] ext4_xattr_release_block+0x1b5/0x1d0
[<ffffffff812679be>] ext4_xattr_delete_inode+0xbe/0x100
[<ffffffff81222a7c>] ext4_free_inode+0x7c/0x4d0
[<ffffffff812277b8>] ? ext4_mark_inode_dirty+0x88/0x230
[<ffffffff8122993c>] ext4_evict_inode+0x32c/0x490
[<ffffffff811b8cd7>] evict+0xa7/0x1c0
[<ffffffff811b8ed3>] iput_final+0xe3/0x170
[<ffffffff811b8f9e>] iput+0x3e/0x50
[<ffffffff812316fd>] ext4_add_nondir+0x4d/0x90
[<ffffffff81231d0b>] ext4_create+0xeb/0x170
[<ffffffff811aae9c>] vfs_create+0xac/0xd0
[<ffffffff811ac845>] lookup_open+0x185/0x1c0
[<ffffffff8129e3b9>] ? selinux_inode_permission+0xa9/0x170
[<ffffffff811acb54>] do_last+0x2d4/0x7a0
[<ffffffff811af743>] path_openat+0xb3/0x480
[<ffffffff8116a8a1>] ? handle_mm_fault+0x251/0x3b0
[<ffffffff811afc49>] do_filp_open+0x49/0xa0
[<ffffffff811bbaad>] ? __alloc_fd+0xdd/0x150
[<ffffffff8119da28>] do_sys_open+0x108/0x1f0
[<ffffffff8119db51>] sys_open+0x21/0x30
[<ffffffff81618959>] system_call_fastpath+0x16/0x1b
Also fix comment for ext4_read_block_bitmap_nowait()
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
|
|
In mke2fs, we only checksum the whole bitmap block and it is right.
While in the kernel, we use EXT4_BLOCKS_PER_GROUP to indicate the
size of the checksumed bitmap which is wrong when we enable bigalloc.
The right size should be EXT4_CLUSTERS_PER_GROUP and this patch fixes
it.
Also as every caller of ext4_block_bitmap_csum_set and
ext4_block_bitmap_csum_verify pass in EXT4_BLOCKS_PER_GROUP(sb)/8,
we'd better removes this parameter and sets it in the function itself.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Cc: stable@vger.kernel.org
|
|
While in ext4_validate_block_bitmap(), if an block allocation bitmap
is found to be invalid, we call ext4_error() while the block group is
still locked. This causes ext4_commit_super() to call a function
which might sleep while in an atomic context.
There's no need to keep the block group locked at this point, so hoist
the ext4_error() call up to ext4_validate_block_bitmap() and release
the block group spinlock before calling ext4_error().
The reported stack trace can be found at:
http://article.gmane.org/gmane.comp.file-systems.ext4/33731
Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
|
|
Make it possible for ext4_count_free to operate on buffers and not
just data in buffer_heads.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
|
Wang Shilong
Theodore Ts'o
Lukas Czerner
Jun Piao
Linus Torvalds
Greg Kroah-Hartman
Mike Christie
Jan Kara
Darrick J. Wong
Maurizio Lombardi
Sheng Yong
Dmitry Monakhov
Namjae Jeon
Stephen Hemminger
Azat Khuzhin
Eryu Guan
Tao Ma