aboutsummaryrefslogtreecommitdiffstats
path: root/fs/f2fs/segment.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2013-12-23f2fs: adds a tracepoint for submit_read_pageChao Yu1-1/+1
This patch adds a tracepoint for submit_read_page. Signed-off-by: Chao Yu <chao2.yu@samsung.com> [Jaegeuk Kim: integrate tracepoints of f2fs_submit_read(_write)_page] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-12-23f2fs: introduce a bio array for per-page write biosJaegeuk Kim1-22/+22
The f2fs has three bio types, NODE, DATA, and META, and manages some data structures per each bio types. The codes are a little bit messy, thus, this patch introduces a bio array which groups individual data structures as follows. struct f2fs_bio_info { struct bio *bio; /* bios to merge */ sector_t last_block_in_bio; /* last block number */ struct mutex io_mutex; /* mutex for bio */ }; struct f2fs_sb_info { ... struct f2fs_bio_info write_io[NR_PAGE_TYPE]; /* for write bios */ ... }; The code changes from this new data structure are trivial. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-12-23f2fs: use sbi->write_mutex for write biosJaegeuk Kim1-4/+9
This patch removes an unnecessary semaphore (i.e., sbi->bio_sem). There is no reason to use the semaphore when f2fs submits read and write IOs. Instead, let's use a write mutex and cover the sbi->bio[] by the lock. Change log from v1: o split write_mutex suggested by Chao Yu Chao described, "All DATA/NODE/META bio buffers in superblock is protected by 'sbi->write_mutex', but each bio buffer area is independent, So we should split write_mutex to three for DATA/NODE/META." Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-12-23f2fs: clean up the do_submit_bio flowJaegeuk Kim1-18/+21
This patch introduces PAGE_TYPE_OF_BIO() and cleans up do_submit_bio() with it. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-12-23f2fs: add a tracepoint for f2fs_issue_discardJaegeuk Kim1-0/+1
This patch adds a tracepoint for f2fs_issue_discard. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-12-23f2fs: introduce f2fs_issue_discard() to clean upJaegeuk Kim1-10/+11
Change log from v1: o fix 32bit drops reported by Dan Carpenter This patch adds f2fs_issue_discard() to clean up blkdev_issue_discard() flows. Dan carpenter reported: "block_t is a 32 bit type and sector_t is a 64 bit type. The upper 32 bits of the sector_t are not used because the shift will wrap." Bug-Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-12-23f2fs: add key functions for small discardsJaegeuk Kim1-0/+60
This patch adds key functions to activate the small discard feature. Note that this procedure is conducted during the checkpoint only. In flush_sit_entries(), when a new dirty sit entry is flushed, f2fs calls add_discard_addrs() which searches candidates to be discarded. The candidates should be marked *invalidated* and also previous checkpoint recognizes it as *valid*. At the end of a checkpoint procedure, f2fs throws discards based on the discard entry list. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-12-23f2fs: add a slab cache entry for small discardsJaegeuk Kim1-0/+20
This patch adds a slab cache entry for small discards. Each entry consists of: struct discard_entry { struct list_head list; /* list head */ block_t blkaddr; /* block address to be discarded */ int len; /* # of consecutive blocks of the discard */ }; Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-12-23f2fs: improve searching speed of __next_free_blkoffChangman Lee1-7/+12
To find a zero bit using the result of OR operation between ckpt_valid_map and cur_valid_map is more fast than find a zero bit in each bitmap. Signed-off-by: Changman Lee <cm224.lee@samsung.com> [Jaegeuk Kim: adjust changed function name] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-12-23f2fs: introduce __find_rev_next(_zero)_bitChangman Lee1-0/+148
When f2fs_set_bit is used, in a byte MSB and LSB is reversed, in that case we can use __find_rev_next_bit or __find_rev_next_zero_bit. Signed-off-by: Changman Lee <cm224.lee@samsung.com> [Jaegeuk Kim: change the function names] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-11-11f2fs: issue more large discard commandChangman Lee1-15/+21
o Changes from v1 Use find_next(_zero)_bit suggested by jg.kim When f2fs issues discard command, if segment is contiguous, let's issue more large segment to gather adjacent segments. ** blktrace ** 179,1 0 5859 42.619023770 971 C D 131072 + 2097152 [0] 179,1 0 33665 108.840475468 971 C D 2228224 + 2494464 [0] 179,1 0 33671 109.131616427 971 C D 14909440 + 344064 [0] 179,1 0 33677 109.137100677 971 C D 15261696 + 4096 [0] Signed-off-by: Changman Lee <cm224.lee@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-11-08f2fs: cleanup waiting routine for writeback pages in cpChangman Lee1-2/+3
use genernal method supported by kernel o changes from v1 If any waiter exists at end io, wake up it. Signed-off-by: Changman Lee <cm224.lee@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-11-06f2fs: avoid to use a NULL point in destroy_segment_managerChao Yu1-0/+2
A NULL point should avoid to be used in destroy_segment_manager after allocating memory fail for f2fs_sm_info. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-10-30f2fs: change the method of calculating the number summary blocksFan Li1-8/+6
npages_for_summary_flush uses (SUMMARY_SIZE + 1) as the size of a f2fs_summary while its actual size is SUMMARY_SIZE. So the result sometimes is bigger than actual number by one, which causes checkpoint can't be written into disk contiguously, and sometimes summary blocks can't be compacted like they should. Besides, when writing summary blocks into pages, if remain space in a page isn't big enough for one f2fs_summary, it will be left unused, current code seems not to take it into account. Signed-off-by: Fan Li <fanofcode.li@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-10-29f2fs: add an option to avoid unnecessary BUG_ONsJaegeuk Kim1-8/+8
If you want to remove unnecessary BUG_ONs, you can just turn off F2FS_CHECK_FS in your kernel config. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-10-28f2fs: remove unnecessary segment bitmap updatesChangman Lee1-23/+8
Only one dirty type is set in __locate_dirty_segment and we can know dirty type of segment. So we don't need to check other dirty types. Signed-off-by: Changman Lee <cm224.lee@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-10-25f2fs: remove redundant set_page_dirty from write_compacted_summariesChao Yu1-4/+4
Previously, set_page_dirty is called every time after writting one summary info into compacted summary page, To avoid redundant set_page_dirty, we only call set_page_dirty before release page. Signed-off-by: Yu Chao <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-10-25f2fs: introduce f2fs_balance_fs_bg for some background jobsJaegeuk Kim1-0/+8
This patch merges some background jobs into this new function. Signed-off-by: Changman Lee <cm224.lee@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-10-25f2fs: reclaim prefree segments periodicallyJaegeuk Kim1-0/+1
Previously, f2fs postpones reclaiming prefree segments into free segments as much as possible. However, if user writes and deletes a bunch of data without any sync or fsync calls, some flash storages can suffer from garbage collections. So, this patch adds the reclaiming codes to f2fs_write_node_pages and background GC thread. If there are a lot of prefree segments, let's do checkpoint so that f2fs submits discard commands for the prefree regions to the flash storage. Signed-off-by: Changman Lee <cm224.lee@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-10-25f2fs: clean up several status-related operationsJaegeuk Kim1-6/+4
This patch cleans up improper definitions that update some status information. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-10-22f2fs: no need to check other dirty_segmap when the seg has been foundHaicheng Li1-3/+7
Because one dirty seg can only be mapped to one dirty_type. Otherwise, it's a bug. Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com> [Jaegeuk Kim: modify a comment related to this patch] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-10-22f2fs: use true and false for boolean valueHaicheng Li1-2/+2
Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-10-18f2fs: avoid wait if IO end up when do_checkpoint for better performanceGu Zheng1-0/+4
Previously, do_checkpoint() will call congestion_wait() for waiting the pages (previous submitted node/meta/data pages) to be written back. Because congestion_wait() will set a regular period (e.g. HZ / 50 ) for waiting, and no additional wake up mechanism was introduced if IO ends up before regular period costed. Yuan Zhong found there is a situation that after the pages have been written back, but the checkpoint thread still wait for congestion_wait to exit. So here we store checkpoint task into f2fs_sb when doing checkpoint, it'll wait for IO completes if there's IO going on, and in the end IO path, wake up checkpoint task when IO ends up. Thanks to Yuan Zhong's pre work about this problem. Reported-by: Yuan Zhong <yuan.mark.zhong@samsung.com> Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-09-24f2fs: avoid allocating failure in bio_allocChao Yu1-1/+3
This patch add macro MAX_BIO_BLOCKS to limit value of npages in f2fs_bio_alloc, it can avoid allocating failure in bio_alloc caused by npages is larger than BIO_MAX_PAGES. Signed-off-by: Yu Chao <chao2.yu@samsung.com> Reviewed-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-08-19f2fs: fix a compound statement label errorGu Zheng1-6/+2
An error "label at end of compound statement" will occur if CONFIG_F2FS_STAT_FS disabled. fs/f2fs/segment.c:556:1: error: label at end of compound statement So clean up the 'out' label to fix it. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-08-12f2fs: clean up the needless end 'return' of void functionGu Zheng1-4/+0
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-08-06f2fs: fix a deadlock in fsyncJin Xu1-0/+10
This patch fixes a deadlock bug that occurs quite often when there are concurrent write and fsync on a same file. Following is the simplified call trace when tasks get hung. fsync thread: - f2fs_sync_file ... - f2fs_write_data_pages ... - update_extent_cache ... - update_inode - wait_on_page_writeback bdi writeback thread - __writeback_single_inode - f2fs_write_data_pages - mutex_lock(sbi->writepages) The deadlock happens when the fsync thread waits on a inode page that has been added to the f2fs' cached bio sbi->bio[NODE], and unfortunately, no one else could be able to submit the cached bio to block layer for writeback. This is because the fsync thread already hold a sbi->fs_lock and the sbi->writepages lock, causing the bdi thread being blocked when attempt to write data pages for the same inode. At the same time, f2fs_gc thread does not notice the situation and could not help. Even the sync syscall gets blocked. To fix it, we could submit the cached bio first before waiting on a inode page that is being written back. Signed-off-by: Jin Xu <jinuxstyle@gmail.com> [Jaegeuk Kim: add more cases to use f2fs_wait_on_page_writeback] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-07-30f2fs: move bio_private allocation out of f2fs_bio_alloc()Gu Zheng1-8/+11
bio->bi_private is not always needed. As in the reading data path, end_read_io does not need bio_private for further using, so moving bio_private allocation out of f2fs_bio_alloc(). Alloc it in the submit_write_page(), and ignore it in the f2fs_readpage(). Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-07-02f2fs: remove reusing any prefree segmentsJaegeuk Kim1-55/+1
This patch removes check_prefree_segments initially designed to enhance the performance by narrowing the range of LBA usage across the whole block device. When allocating a new segment, previous f2fs tries to find proper prefree segments, and then, if finds a segment, it reuses the segment for further data or node block allocation. However, I found that this was totally wrong approach since the prefree segments have several data or node blocks that will be used by the roll-forward mechanism operated after sudden-power-off. Let's assume the following scenario. /* write 8MB with fsync */ for (i = 0; i < 2048; i++) { offset = i * 4096; write(fd, offset, 4KB); fsync(fd); } In this case, naive segment allocation sequence will be like: data segment: x, x+1, x+2, x+3 node segment: y, y+1, y+2, y+3. But, if we can reuse prefree segments, the sequence can be like: data segment: x, x+1, y, y+1 node segment: y, y+1, y+2, y+3. Because, y, y+1, and y+2 became prefree segments one by one, and those are reused by data allocation. After conducting this workload, we should consider how to recover the latest inode with its data. If we reuse the prefree segments such as y or y+1, we lost the old node blocks so that f2fs even cannot start roll-forward recovery. Therefore, I suggest that we should remove reusing prefree segments. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-07-02f2fs: optimize the init_dirty_segmap functionNamjae Jeon1-4/+4
Optimize the while loop condition Since this condition will always be true and while loop will be terminated by the following condition in code: if (segno >= TOTAL_SEGS(sbi)) break; Hence we can replace the while loop condition with while(1) instead of always checking for segno to be less than Total segs. Also we do not need to use TOTAL_SEGS() everytime. We can store this value in a local variable since this value is constant. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Pankaj Kumar <pankaj.km@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-06-14f2fs: recover wrong pino after checkpoint during fsyncJaegeuk Kim1-1/+1
If a file is linked, f2fs loose its parent inode number so that fsync calls for the linked file should do checkpoint all the time. But, if we can recover its parent inode number after the checkpoint, we can adjust roll-forward mechanism for the further fsync calls, which is able to improve the fsync performance significatly. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-06-14f2fs: make locate_dirty_segment() as staticHaicheng Li1-1/+1
It's used only locally and could be static. Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-06-14f2fs: remove unnecessary parameter "offset" from __add_sum_entry()Haicheng Li1-5/+5
We can get the value directly from pointer "curseg". Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-05-28f2fs: push some variables to debug partNamjae Jeon1-0/+5
Some, counters are needed only for the statistical information while debugging. So, those can be controlled using CONFIG_F2FS_STAT_FS, pushing the usage for few variables under this flag. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-05-28f2fs: remove unecessary variable and codeHaicheng Li1-10/+8
Code cleanup without behavior changed. Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-04-30f2fs: modify the number of issued pages to merge IOsJaegeuk Kim1-1/+1
When testing f2fs on an SSD, I found some 128 page IOs followed by 1 page IO were issued by f2fs_write_node_pages. This means that there were some mishandling flows which degrades performance. Previous f2fs_write_node_pages determines the number of pages to be written, nr_to_write, as follows. 1. The bio_get_nr_vecs returns 129 pages. 2. The bio_alloc makes a room for 128 pages. 3. The initial 128 pages go into one bio. 4. The existing bio is submitted, and a new bio is prepared for the last 1 page. 5. Finally, sync_node_pages submits the last 1 page bio. The problem is from the use of bio_get_nr_vecs, so this patch replace it with max_hw_blocks using queue_max_sectors. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-04-26f2fs: add REQ_META about metadata requests for submitNamjae Jeon1-0/+3
Adding REQ_META for all the metadata requests can help in improving the FS performance, if the underlying device supports TAGGING. So, when considering the submit_bio path for all the f2fs requests. We can add REQ_META for all the META requests. As a precursor to this change we considered the commit 4265900e0be653f5b78baf2816857ef57cf1332f 'mmc: MMC-4.5 Data Tag Support' Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-04-23f2fs: add tracepoints for write page operationsNamjae Jeon1-0/+5
Add tracepoints to debug the various page write operation like data pages, meta pages. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Pankaj Kumar <pankaj.km@samsung.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> [Jaegeuk: remove unnecessary tracepoints] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-04-03f2fs: fix the bitmap consistency of dirty segmentsJaegeuk Kim1-5/+18
Like below, there are 8 segment bitmaps for SSR victim candidates. enum dirty_type { DIRTY_HOT_DATA, /* dirty segments assigned as hot data logs */ DIRTY_WARM_DATA, /* dirty segments assigned as warm data logs */ DIRTY_COLD_DATA, /* dirty segments assigned as cold data logs */ DIRTY_HOT_NODE, /* dirty segments assigned as hot node logs */ DIRTY_WARM_NODE, /* dirty segments assigned as warm node logs */ DIRTY_COLD_NODE, /* dirty segments assigned as cold node logs */ DIRTY, /* to count # of dirty segments */ PRE, /* to count # of entirely obsolete segments */ NR_DIRTY_TYPE }; The upper 6 bitmaps indicates segments dirtied by active log areas respectively. And, the DIRTY bitmap integrates all the 6 bitmaps. For example, o DIRTY_HOT_DATA : 1010000 o DIRTY_WARM_DATA: 0100000 o DIRTY_COLD_DATA: 0001000 o DIRTY_HOT_NODE : 0000010 o DIRTY_WARM_NODE: 0000001 o DIRTY_COLD_NODE: 0000000 In this case, o DIRTY : 1111011, which means that we should guarantee the consistency between DIRTY and other bitmaps concreately. However, the SSR mode selects victims freely from any log types, which can set multiple bits across the various bitmap types. So, this patch eliminates this inconsistency. Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-04-03f2fs: allocate remained free segments in the LFS modeJaegeuk Kim1-0/+13
This patch adds a new condition that allocates free segments in the current active section even if SSR is needed. Otherwise, f2fs cannot allocate remained free segments in the section since SSR finds dirty segments only. Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-04-03f2fs: change GC bitmaps to apply the section granularityJaegeuk Kim1-35/+31
This patch removes a bitmap for victim segments selected by foreground GC, and modifies the other bitmap for victim segments selected by background GC. 1) foreground GC bitmap : We don't need to manage this, since we just only one previous victim section number instead of the whole victim history. The f2fs uses the victim section number in order not to allocate currently GC'ed section to current active logs. 2) background GC bitmap : This bitmap is used to avoid selecting victims repeatedly by background GCs. In addition, the victims are able to be selected by foreground GCs, since there is no need to read victim blocks during foreground GCs. By the fact that the foreground GC reclaims segments in a section unit, it'd be better to manage this bitmap based on the section granularity. Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-04-03f2fs: allocate new segment aligned with sectionsJaegeuk Kim1-1/+2
When allocating a new segment under the LFS mode, we should keep the section boundary. Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-04-03f2fs: introduce TOTAL_SECS macroJaegeuk Kim1-10/+9
Let's use a macro to get the total number of sections. Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-03-31f2fs: use kmemdupAlexandru Gheorghiu1-2/+1
Use kmemdup instead of kzalloc and memcpy. Signed-off-by: Alexandru Gheorghiu <gheorghiuandru@gmail.com> Acked-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-02-12f2fs: clarify and enhance the f2fs_gc flowJaegeuk Kim1-2/+19
This patch makes clearer the ambiguous f2fs_gc flow as follows. 1. Remove intermediate checkpoint condition during f2fs_gc (i.e., should_do_checkpoint() and GC_BLOCKED) 2. Remove unnecessary return values of f2fs_gc because of #1. (i.e., GC_NODE, GC_OK, etc) 3. Simplify write_checkpoint() because of #2. 4. Clarify the main f2fs_gc flow. o monitor how many freed sections during one iteration of do_garbage_collect(). o do GC more without checkpoints if we can't get enough free sections. o do checkpoint once we've got enough free sections through forground GCs. 5. Adopt thread-logging (Slack-Space-Recycle) scheme more aggressively on data log types. See. get_ssr_segement() Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-02-12f2fs: prevent checkpoint once any IO failure is detectedJaegeuk Kim1-6/+2
This patch enhances the checkpoint routine to cope with IO errors. Basically f2fs detects IO errors from end_io_write, and the errors are able to be occurred during one of data, node, and meta page writes. In the previous code, when an IO error is occurred during writes, f2fs sets a flag, CP_ERROR_FLAG, in the raw ckeckpoint buffer which will be written to disk. Afterwards, write_checkpoint() will check the flag and remount f2fs as a read-only (ro) mode. However, even once f2fs is remounted as a ro mode, dirty checkpoint pages are freely able to be written to disk by flusher or kswapd in background. In such a case, after cold reboot, f2fs would restore the checkpoint data having CP_ERROR_FLAG, resulting in disabling write_checkpoint and remounting f2fs as a ro mode again. Therefore, let's prevent any checkpoint page (meta) writes once an IO error is occurred, and remount f2fs as a ro mode right away at that moment. Reported-by: Oliver Winker <oliver@oli1170.net> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com> Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com>
2013-01-10f2fs: revisit the f2fs_gc flowJaegeuk Kim1-1/+1
I'd like to revisit the f2fs_gc flow and rewrite as follows. 1. In practical, the nGC parameter of f2fs_gc is meaningless. So, let's remove it. 2. Background GC marks victim blocks as dirty one at a time. 3. Foreground GC should do cleaning job until acquiring enough free sections. Afterwards, it needs to do checkpoint. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-12-28f2fs: remove unneeded initialization of nr_dirty in dirty_seglist_infoNamjae Jeon1-1/+0
Since, the memory for the object of dirty_seglist_info is allocated using kzalloc - which returns zeroed out memory. So, there is no need to initialize the nr_dirty values with zeroes. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-12-28f2fs: fix equation of has_not_enough_free_secs()Jaegeuk Kim1-34/+2
Practically, has_not_enough_free_secs() should calculate with the numbers of current node and directory data blocks together. Actually the equation was implemented in need_to_flush(). So, this patch removes need_flush() and moves the equation into has_not_enough_free_secs(). Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-12-28f2fs: return a default value for non-void functionJaegeuk Kim1-4/+3
This patch resolves a build warning reported by kbuild test robot. " fs/f2fs/segment.c: In function '__get_segment_type': fs/f2fs/segment.c:806:1: warning: control reaches end of non-void function [-Wreturn-type] " Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.