aboutsummaryrefslogtreecommitdiffstats
path: root/fs/f2fs (follow)
AgeCommit message (Collapse)AuthorFilesLines
2013-01-22f2fs: use _safe() version of list_for_eachDan Carpenter1-4/+3
This is calling list_del() inside a loop which is a problem when we try move to the next item on the list. I've converted it to use the _safe version. And also, as a cleanup, I've converted it to use list_for_each_entry instead of list_for_each. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-01-22f2fs: add comments of start_bidx_of_nodeJaegeuk Kim1-1/+5
The caller of start_bidx_of_node() should give proper node offsets which point only direct node blocks. Otherwise, it is a caller's bug. This patch adds comments to make it clear. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-01-22f2fs: avoid issuing small bios due to several dirty node pagesJaegeuk Kim1-6/+11
If some small bios of dirty node pages are supposed to be issued during the sequential data writes, there-in well-produced consecutive data bios are able to be split by the small node bios, resulting in performance degradation. So, let's collect a number of dirty node pages until reaching a threshold. And, by default, I set the threshold as 2MB, a segment size. This improves sequential write performance on i5, 512GB SSD (830 w/ SATA2) as follows. Before: 231 MB/s -> After: 255 MB/s Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com> Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com>
2013-01-22f2fs: support swapfileJaegeuk Kim1-0/+6
This patch adds f2fs_bmap operation to the data address space. This enables f2fs to support swapfile. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-01-22f2fs: add remap_pages as generic_file_remap_pagesJaegeuk Kim1-2/+3
This was added for all the file systems before. See the following commit. commit id: 0b173bc4daa8f8ec03a85abf5e47b23502ff80af [PATCH] mm: kill vma flag VM_CAN_NONLINEAR This patch moves actual ptes filling for non-linear file mappings into special vma operation: ->remap_pages(). File system must implement this method to get non-linear mappings support, if it uses filemap_fault() then generic_file_remap_pages() can be used. Now device drivers can implement this method and obtain nonlinear vma support." Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-01-22f2fs: add __init to functions in init_f2fs_fsNamjae Jeon5-9/+9
Add __init to functions in init_f2fs_fs for code consistency. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-01-15f2fs: fix the debugfs entry creation pathNamjae Jeon3-21/+19
As the "status" debugfs entry will be maintained for entire F2FS filesystem irrespective of the number of partitions. So, we can move the initialization to the init part of the f2fs and destroy will be done from exit part. After making changes, for individual partition mount - entry creation code will not be executed. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-01-15f2fs: add global mutex_lock to protect f2fs_stat_listmajianpeng1-12/+11
There is an race condition between umounting f2fs and reading f2fs/status, which results in oops. Fox example: Thread A Thread B umount f2fs cat f2fs/status f2fs_destroy_stats() { stat_show() { list_for_each_entry_safe(&f2fs_stat_list) list_del(&si->stat_list); mutex_lock(&si->stat_lock); si->sbi = NULL; mutex_unlock(&si->stat_lock); kfree(sbi->stat_info); } mutex_lock(&si->stat_lock) <- si is gone. ... } Solution with a global lock: f2fs_stat_mutex: Thread A Thread B umount f2fs cat f2fs/status f2fs_destroy_stats() { stat_show() { mutex_lock(&f2fs_stat_mutex); list_del(&si->stat_list); mutex_unlock(&f2fs_stat_mutex); kfree(sbi->stat_info); mutex_lock(&f2fs_stat_mutex); } list_for_each_entry_safe(&f2fs_stat_list) ... mutex_unlock(&f2fs_stat_mutex); } Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> [jaegeuk.kim@samsung.com: fix typos, description, and remove the existing lock] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-01-15f2fs: remove the blk_plug usage in f2fs_write_data_pagesNamjae Jeon1-1/+10
Let's consider the usage of blk_plug in f2fs_write_data_pages(). We can come up with the two issues: lock contention and task awareness. 1. Merging bios prior to grabing "queue lock" The f2fs merges consecutive IOs in the file system level before submitting any bios, which is similar with the back merge by the plugging mechanism in attempt_plug_merge(). Both of them need to acquire no queue lock. 2. Merging policy with respect to tasks The f2fs merges IOs as much as possible regardless of tasks, while blk-plugging is conducted on a basis of tasks. As we can understand there are trade-offs, f2fs tries to maximize the write performance with well-merged bios. As a result, if f2fs produces many consecutive but separated bios in writepages(), it would be good to use blk-plugging since f2fs would be able to avoid queue lock contention in the block layer by merging them. But, f2fs merges IOs and submit one bio, which means that there are not much chances to merge bios by attempt_plug_merge(). However, f2fs has already been used blk_plug by triggering generic_writepages() in f2fs_write_data_pages(). So to make the overall code consistency, I'd like to remove blk_plug there. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-01-14f2fs: avoid redundant time update for parent directory in f2fs_delete_entryNamjae Jeon1-1/+1
In call to f2fs_delete_entry, 'dir' time modification code is put at two places. So, remove the redundant code for timing update. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-01-14f2fs: remove redundant call to set_blocksize in f2fs_fill_superNamjae Jeon1-5/+1
Since, f2fs supports only 4KB blocksize, which is set at the beginning in f2fs_fill_super. So, we do not need to again check this blocksize setting in such case. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-01-11f2fs: move f2fs_balance_fs to punch_holeJaegeuk Kim1-3/+2
The f2fs_fallocate() has two operations: punch_hole and expand_size. Only in the case of punch_hole, dirty node pages can be produced, so let's trigger f2fs_balance_fs() in this case only. Furthermore, let's trigger it at every data truncation routine. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-01-11f2fs: add f2fs_balance_fs in several interfacesJaegeuk Kim4-0/+10
The f2fs_balance_fs() is to check the number of free sections and decide whether it needs to conduct cleaning or not. If there are not enough free sections, the cleaning job should be started. In order to control an amount of free sections even under high utilization, f2fs should call f2fs_balance_fs at all the VFS interfaces that are able to produce dirty pages. This patch adds the function calls in the missing interfaces as follows. 1. f2fs_setxattr() The f2fs_setxattr() produces dirty node pages so that we should call f2fs_balance_fs() either likewise doing in other VFS interfaces such as f2fs_lookup(), f2fs_mkdir(), and so on. 2. f2fs_sync_file() We should guarantee serving free sections for syncing metadata during fsync. Previously, there is no space check before triggering checkpoint and sync_node_pages. Therefore, if a bunch of fsync calls are triggered under 100% of FS utilization, f2fs is able to be faced with no free sections, resulting in BUG_ON(). 3. f2fs_sync_fs() Before calling write_checkpoint(), we should guarantee that there are minimum free sections. 4. f2fs_write_inode() f2fs_write_inode() is also able to produce dirty node pages. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-01-10f2fs: revisit the f2fs_gc flowJaegeuk Kim3-41/+23
I'd like to revisit the f2fs_gc flow and rewrite as follows. 1. In practical, the nGC parameter of f2fs_gc is meaningless. So, let's remove it. 2. Background GC marks victim blocks as dirty one at a time. 3. Foreground GC should do cleaning job until acquiring enough free sections. Afterwards, it needs to do checkpoint. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-01-04f2fs: check return value during recoveryJaegeuk Kim1-1/+1
This patch resolves Coverity #753102: >>> No check of the return value of "f2fs_add_link(&dent, inode)". Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-01-04f2fs: avoid null dereference in f2fs_acl_from_diskJaegeuk Kim1-7/+6
This patch resolves Coverity #751303: >>> CID 753103: Explicit null dereferenced (FORWARD_NULL) Passing null >>> pointer "value" to function "f2fs_acl_from_disk(char const *, size_t)", which dereferences it. [Error path] - value = NULL; - retval = 0 by f2fs_getxattr(); - f2fs_acl_from_disk(value:NULL, ...); Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-01-04f2fs: initialize newly allocated dnode structureJaegeuk Kim1-1/+1
This patch resolves Coverity #753112. In practical, the existing code flow does not fall into the reported errorneous path. But, anyway, let's avoid this for future. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-01-04f2fs: update f2fs partition info about SIT/NAT layoutHuajun Li1-2/+2
Update partition info output under debug FS to reflect segment layout correctly. Signed-off-by: Huajun Li <huajun.li.lee@gmail.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-01-04f2fs: remove unneeded INIT_LIST_HEAD at few placesNamjae Jeon2-2/+0
While creating a new entry for addition to the list(orphan inode list and fsync inode entry list), there is no need to call HEAD initialization for these entries. So, remove that init part. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-01-04f2fs: fix time update in case of f2fs fallocateNamjae Jeon1-0/+5
After doing a punch hole or expanding inode doing fallocation. The change and modification time are not update for the file. So, update time after no issue is observed in fallocate. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-01-04f2fs: introduce f2fs_msg to ease adding information printsNamjae Jeon2-17/+65
Introduced f2fs_msg function to differentiate f2fs specific messages in the log. And, added few informative prints in the mount path, to convey proper error in case of mount failure. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-01-03Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fsLinus Torvalds14-137/+107
Pull f2fs bug fixes from Jaegeuk Kim: "This patch-set includes two major bug fixes: - incorrect IUsed provided by *df -i*, and - lookup failure of parent inodes in corner cases. [Other Bug Fixes] - Fix error handling routines - Trigger recovery process correctly - Resolve build failures due to missing header files [Etc] - Add a MAINTAINERS entry for f2fs - Fix and clean up variables, functions, and equations - Avoid warnings during compilation" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: f2fs: unify string length declarations and usage f2fs: clean up unused variables and return values f2fs: clean up the start_bidx_of_node function f2fs: remove unneeded variable from f2fs_sync_fs f2fs: fix fsync_inode list addition logic and avoid invalid access to memory f2fs: remove unneeded initialization of nr_dirty in dirty_seglist_info f2fs: handle error from f2fs_iget_nowait f2fs: fix equation of has_not_enough_free_secs() f2fs: add MAINTAINERS entry f2fs: return a default value for non-void function f2fs: invalidate the node page if allocation is failed f2fs: add missing #include <linux/prefetch.h> f2fs: do f2fs_balance_fs in front of dir operations f2fs: should recover orphan and fsync data f2fs: fix handling errors got by f2fs_write_inode f2fs: fix up f2fs_get_parent issue to retrieve correct parent inode number f2fs: fix wrong calculation on f_files in statfs f2fs: remove set_page_dirty for atomic f2fs_end_io_write
2012-12-28f2fs: unify string length declarations and usageLeon Romanovsky5-15/+18
This patch is intended to unify string length declarations and usage. There are number of calls to strlen which return size_t object. The size of this object depends on compiler if it will be bigger, equal or even smaller than an unsigned int Signed-off-by: Leon Romanovsky <leon@leon.nu> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-12-28f2fs: clean up unused variables and return valuesJaegeuk Kim3-17/+5
This patch cleans up a couple of unnecessary codes related to unused variables and return values. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-12-28f2fs: clean up the start_bidx_of_node functionJaegeuk Kim1-14/+8
This patch also resolves the following warning reported by kbuild test robot. fs/f2fs/gc.c: In function 'start_bidx_of_node': fs/f2fs/gc.c:453:21: warning: 'bidx' may be used uninitialized in this function Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-12-28f2fs: remove unneeded variable from f2fs_sync_fsNamjae Jeon1-2/+1
We can directly return '0' from the function, instead of introducing a 'ret' variable. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-12-28f2fs: fix fsync_inode list addition logic and avoid invalid access to memoryNamjae Jeon1-3/+4
In function find_fsync_dnodes() - the fsync inodes gets added to the list, but in one path suppose f2fs_iget results in error, in such case - error gets added to the fsync inode list. In next call to recover_data()->get_fsync_inode() entry = list_entry(this, struct fsync_inode_entry, list); if (entry->inode->i_ino == ino) This can result in "invalid access to memory" when it encounters 'error' as entry in the fsync inode list. So, add the fsync inode entry to the list only in case of no errors. And, free the object at that point itself in case of issue. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-12-28f2fs: remove unneeded initialization of nr_dirty in dirty_seglist_infoNamjae Jeon1-1/+0
Since, the memory for the object of dirty_seglist_info is allocated using kzalloc - which returns zeroed out memory. So, there is no need to initialize the nr_dirty values with zeroes. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-12-28f2fs: handle error from f2fs_iget_nowaitNamjae Jeon1-0/+3
In case f2fs_iget_nowait returns error, it results in truncate_hole being called with 'error' value as inode pointer. There is no check in truncate_hole for valid inode, so it could result in crash due "invalid access to memory". Avoid this by handling error condition properly. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-12-28f2fs: fix equation of has_not_enough_free_secs()Jaegeuk Kim2-35/+16
Practically, has_not_enough_free_secs() should calculate with the numbers of current node and directory data blocks together. Actually the equation was implemented in need_to_flush(). So, this patch removes need_flush() and moves the equation into has_not_enough_free_secs(). Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-12-28f2fs: return a default value for non-void functionJaegeuk Kim2-5/+4
This patch resolves a build warning reported by kbuild test robot. " fs/f2fs/segment.c: In function '__get_segment_type': fs/f2fs/segment.c:806:1: warning: control reaches end of non-void function [-Wreturn-type] " Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-12-28f2fs: invalidate the node page if allocation is failedJaegeuk Kim1-17/+12
The new_node_page() is processed as the following procedure. 1. A new node page is allocated. 2. Set PageUptodate with proper footer information. 3. Check if there is a free space for allocation 4.a. If there is no space, f2fs returns with -ENOSPC. 4.b. Otherwise, go next. In the case of step #4.a, f2fs remains a wrong node page in the page cache with the uptodate flag. Also, even though a new node page is allocated successfully, an error can be occurred afterwards due to allocation failure of the other data structures. In such a case, remove_inode_page() would be triggered, so that we have to clear uptodate flag in truncate_node() too. So, we should remove the uptodate flag, if allocation is failed. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-12-28f2fs: add missing #include <linux/prefetch.h>Geert Uytterhoeven2-0/+2
m68k allmodconfig: fs/f2fs/data.c: In function ‘read_end_io’: fs/f2fs/data.c:311: error: implicit declaration of function ‘prefetchw’ fs/f2fs/segment.c: In function ‘f2fs_end_io_write’: fs/f2fs/segment.c:628: error: implicit declaration of function ‘prefetchw’ Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-12-25f2fs: Don't assign e_id in f2fs_acl_from_diskEric W. Biederman1-1/+0
With user namespaces enabled building f2fs fails with: CC fs/f2fs/acl.o fs/f2fs/acl.c: In function ‘f2fs_acl_from_disk’: fs/f2fs/acl.c:85:21: error: ‘struct posix_acl_entry’ has no member named ‘e_id’ make[2]: *** [fs/f2fs/acl.o] Error 1 make[2]: Target `__build' not remade because of errors. e_id is a backwards compatibility field only used for file systems that haven't been converted to use kuids and kgids. When the posix acl tag field is neither ACL_USER nor ACL_GROUP assigning e_id is unnecessary. Remove the assignment so f2fs will build with user namespaces enabled. Cc: Namjae Jeon <namjae.jeon@samsung.com> Cc: Amit Sahrawat <a.sahrawat@samsung.com> Acked-by: Jaegeuk Kim <jaegeuk.kim@samsung.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-12-26f2fs: do f2fs_balance_fs in front of dir operationsJaegeuk Kim1-14/+14
In order to conserve free sections to deal with the worst-case scenarios, f2fs should be able to freeze all the directory operations especially when there are not enough free sections. The f2fs_balance_fs() is for this use. When FS utilization becomes almost 100%, directory operations can be failed due to -ENOSPC frequently, which produces some dirty node pages occasionally. Previously, in such a case, f2fs_balance_fs() is not able to be triggered since it is triggered only if the directory operation ends up with success. So, this patch triggers f2fs_balance_fs() at first before handling directory operations. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-12-26f2fs: should recover orphan and fsync dataJaegeuk Kim1-4/+2
The recovery routine should do all the time regardless of normal umount action. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-12-26f2fs: fix handling errors got by f2fs_write_inodeJaegeuk Kim4-5/+10
Ruslan reported that f2fs hangs with an infinite loop in f2fs_sync_file(): while (sync_node_pages(sbi, inode->i_ino, &wbc) == 0) f2fs_write_inode(inode, NULL); The reason was revealed that the cold flag is not set even thought this inode is a normal file. Therefore, sync_node_pages() skips to write node blocks since it only writes cold node blocks. The cold flag is stored to the node_footer in node block, and whenever a new node page is allocated, it is set according to its file type, file or directory. But, after sudden-power-off, when recovering the inode page, f2fs doesn't recover its cold flag. So, let's assign the cold flag in more right places. One more thing: If f2fs_write_inode() returns an error due to whatever situations, there would be no dirty node pages so that sync_node_pages() returns zero. (i.e., zero means nothing was written.) Reported-by: Ruslan N. Marchenko <me@ruff.mobi> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-12-26f2fs: fix up f2fs_get_parent issue to retrieve correct parent inode numberNamjae Jeon2-2/+6
Test Case: [NFS Client] ls -lR . [NFS Server] while [ 1 ] do echo 3 > /proc/sys/vm/drop_caches done Error on NFS Client: "No such file or directory" When cache is dropped at the server, it results in lookup failure at the NFS client due to non-connection with the parent. The default path is it initiates a lookup by calculating the hash value for the name, even though the hash values stored on the disk for "." and ".." is maintained as zero, which results in failure from find_in_block due to not matching HASH values. Fix up, by using the correct hashing values for these entries. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-12-26f2fs: fix wrong calculation on f_files in statfsJaegeuk Kim1-2/+2
In f2fs_statfs(), f_files should be the total number of available inodes instead of the currently allocated inodes. So, this patch should resolve the reported bug below. Note that, showing 10% usage is not a bug, since f2fs reveals whole volume size as much as possible and shows the space overhead as *used*. This policy is fair enough with respect to other file systems. <Reported Bug> (loop0 is backed by 1GiB file) $ mkfs.f2fs /dev/loop0 F2FS-tools: Ver: 1.1.0 (2012-12-11) Info: sector size = 512 Info: total sectors = 2097152 (in 512bytes) Info: zone aligned segment0 blkaddr: 512 Info: format successful $ mount /dev/loop0 mnt/ $ df mnt/ Filesystem 1K-blocks Used Available Use% Mounted on /dev/loop0 1046528 98312 929784 10% /home/zeta/linux-devel/mtd-bench/mnt $ df mnt/ -i Filesystem Inodes IUsed IFree IUse% Mounted on /dev/loop0 1 -465918 465919 - /home/zeta/linux-devel/mtd-bench/mnt Notice IUsed is negative. Also, 10% usage on a fresh f2fs seems too much to be correct. Reported-and-Tested-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-12-26f2fs: remove set_page_dirty for atomic f2fs_end_io_writeJaegeuk Kim1-1/+0
We should guarantee not to do *scheduling while atomic*. I found, in atomic f2fs_end_io_write(), there is a set_page_dirty() call to deal with IO errors. But, set_page_dirty() calls: -> f2fs_set_data_page_dirty() -> set_dirty_dir_page() -> cond_resched() which results in scheduling. In order to avoid this, I'd like to remove simply set_page_dirty(), since the page is already marked as ERROR and f2fs will be operated as the read-only mode as well. So, there is no recovery issue with this. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-12-11f2fs: fix tracking parent inode numberJaegeuk Kim3-2/+11
Previously, f2fs didn't track the parent inode number correctly which is stored in each f2fs_inode. In the case of the following scenario, a bug can be occured. Let's suppose there are one directory, "/b", and two files, "/a" and "/b/a". - pino of "/a" is ROOT_INO. - pino of "/b/a" is DIR_B_INO. Then, # sync : The inode pages of "/a" and "/b/a" contain the parent inode numbers as ROOT_INO and DIR_B_INO respectively. # mv /a /b/a : The parent inode number of "/a" should be changed to DIR_B_INO, but f2fs didn't do that. Ref. f2fs_set_link(). In order to fix this clearly, I added i_pino in f2fs_inode_info, and whenever it needs to be changed like in f2fs_add_link() and f2fs_set_link(), it is updated temporarily in f2fs_inode_info. And later, f2fs_write_inode() stores the latest information to the inode pages. For power-off-recovery, f2fs_sync_file() triggers simply f2fs_write_inode(). Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-12-11f2fs: cleanup the f2fs_bio_alloc routineJaegeuk Kim4-18/+25
Do cleanup more for better code readability. - Change the parameter set of f2fs_bio_alloc() This function should allocate a bio only since it is not something like f2fs_bio_init(). Instead, the caller should initialize the allocated bio. - Introduce SECTOR_FROM_BLOCK This macro translates a block address to its sector address. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com> Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com>
2012-12-11f2fs: introduce accessor to retrieve number of dentry slotsNamjae Jeon1-8/+5
Simplify code by providing the accessor macro to retrieve the number of dentry slots for a given filename length. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
2012-12-11f2fs: remove redundant call to f2fs_put_page in delete entryNamjae Jeon1-3/+2
Since, we anyway need to put the page after deleting entry. So, there is no need to make same call under different conditions. Move out the f2fs_put_page from the two conditions and call at once. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
2012-12-11f2fs: make use of GFP_F2FS_ZERO for setting gfp_maskNamjae Jeon1-1/+1
Since, GFP_NOFS and __GFP_ZERO is being used to set gfp_mask. We can instead make use of already predefined macro GFP_F2FS_ZERO. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
2012-12-11f2fs: rewrite f2fs_bio_alloc to make it simplerNamjae Jeon1-17/+7
Since, GFP_NOFS(__GFP_WAIT) is used for allocation requests of bio in f2fs. So, there is no chance of returning NULL from the BIO allocation. Making the bio allocation routine for f2fs simpler. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
2012-12-11f2fs: remove unused variableWei Yongjun2-4/+0
The variables node_page and page_offset are initialized but never used otherwise, so remove those unused variables. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
2012-12-11f2fs: move error condition for mkdir at proper placeNamjae Jeon1-2/+1
In function f2fs_mkdir, err is being initialized without even checking if there was any error in new inode creation. So, instead check the inode error and make use of error/return condition. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
2012-12-11f2fs: remove unneeded initializationNamjae Jeon2-3/+3
No need to initialize "struct f2fs_gc_kthread *gc_th = NULL", as gc_th = NULL, will be taken care by the return values of kmalloc(). And fix codes in other places. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
2012-12-11f2fs: check read only condition before beginning write outNamjae Jeon1-2/+3
If the filesystem is mounted as read-only then return from that point itself instead of first doing a writeout/wait and then checking for read-only condition. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.