aboutsummaryrefslogtreecommitdiffstats
path: root/fs/fuse (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-10-01fuse: allocate page array more efficientlyMiklos Szeredi1-26/+18
When allocating page array for a request the array for the page pointers and the array for page descriptors are allocated by two separate kmalloc() calls. Merge these into one allocation. Also instead of initializing the request and the page arrays with memset(), use the zeroing allocation variants. Reserved requests never carry pages (page array size is zero). Make that explicit by initializing the page array pointers to NULL and make sure the assumption remains true by adding a WARN_ON(). Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-10-01fuse: reduce size of struct fuse_inodeMiklos Szeredi4-41/+58
Do this by grouping fields used for cached writes and putting them into a union with fileds used for cached readdir (with obviously no overlap, since we don't have hybrid objects). Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-10-01fuse: use iversion for readdir cache verificationMiklos Szeredi3-8/+21
Use the internal iversion counter to make sure modifications of the directory through this filesystem are not missed by the mtime check (due to mtime granularity). Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-10-01fuse: use mtime for readdir cache verificationMiklos Szeredi2-4/+37
Store the modification time of the directory in the cache, obtained before starting to fill the cache. When reading the cache, verify that the directory hasn't changed, by checking if current modification time is the same as the one stored in the cache. This only needs to be done when the current file position is at the beginning of the directory, as mandated by POSIX. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-10-01fuse: add readdir cache versionMiklos Szeredi3-1/+52
Allow the cache to be invalidated when page(s) have gone missing. In this case increment the version of the cache and reset to an empty state. Add a version number to the directory stream in struct fuse_file as well, indicating the version of the cache it's supposed to be reading. If the cache version doesn't match the stream's version, then reset the stream to the beginning of the cache. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-10-01fuse: allow using readdir cacheMiklos Szeredi3-4/+161
The cache is only used if it's completed, not while it's still being filled; this constraint could be lifted later, if it turns out to be useful. Introduce state in struct fuse_file that indicates the position within the cache. After a seek, reset the position to the beginning of the cache and search the cache for the current position. If the current position is not found in the cache, then fall back to uncached readdir. It can also happen that page(s) disappear from the cache, in which case we must also fall back to uncached readdir. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-10-01fuse: allow caching readdirMiklos Szeredi3-1/+109
This patch just adds the cache filling functions, which are invoked if FOPEN_CACHE_DIR flag is set in the OPENDIR reply. Cache reading and cache invalidation are added by subsequent patches. The directory cache uses the page cache. Directory entries are packed into a page in the same format as in the READDIR reply. A page only contains whole entries, the space at the end of the page is cleared. The page is locked while being modified. Multiple parallel readdirs on the same directory can fill the cache; the only constraint is that continuity must be maintained (d_off of last entry points to position of current entry). Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-09-28fuse: extract fuse_emit() helperMiklos Szeredi1-4/+9
Prepare for cache filling by introducing a helper for emitting a single directory entry. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-09-28fuse: split out readdir.cMiklos Szeredi4-258/+274
Directory reading code is about to grow larger, so split it out from dir.c into a new source file. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-09-28fuse: Use hash table to link processing requestKirill Tkhai3-14/+41
We noticed the performance bottleneck in FUSE running our Virtuozzo storage over rdma. On some types of workload we observe 20% of times spent in request_find() in profiler. This function is iterating over long requests list, and it scales bad. The patch introduces hash table to reduce the number of iterations, we do in this function. Hash generating algorithm is taken from hash_add() function, while 256 lines table is used to store pending requests. This fixes problem and improves the performance. Reported-by: Alexey Kuznetsov <kuznet@virtuozzo.com> Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-09-28fuse: kill req->intr_uniqueKirill Tkhai2-9/+5
This field is not needed after the previous patch, since we can easily convert request ID to interrupt request ID and vice versa. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-09-28fuse: change interrupt requests allocation algorithmKirill Tkhai1-2/+7
Using of two unconnected IDs req->in.h.unique and req->intr_unique does not allow to link requests to a hash table. We need can't use none of them as a key to calculate hash. This patch changes the algorithm of allocation of IDs for a request. Plain requests obtain even ID, while interrupt requests are encoded in the low bit. So, in next patches we will be able to use the rest of ID bits to calculate hash, and the hash will be the same for plain and interrupt requests. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-09-28fuse: do not take fc->lock in fuse_request_send_background()Kirill Tkhai3-28/+28
Currently, we take fc->lock there only to check for fc->connected. But this flag is changed only on connection abort, which is very rare operation. So allow checking fc->connected under just fc->bg_lock and use this lock (as well as fc->lock) when resetting fc->connected. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-09-28fuse: introduce fc->bg_lockKirill Tkhai5-15/+26
To reduce contention of fc->lock, this patch introduces bg_lock for protection of fields related to background queue. These are: max_background, congestion_threshold, num_background, active_background, bg_queue and blocked. This allows next patch to make async reads not requiring fc->lock, so async reads and writes will have better performance executed in parallel. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-09-28fuse: add locking to max_background and congestion_threshold changesKirill Tkhai1-6/+24
Functions sequences like request_end()->flush_bg_queue() require that max_background and congestion_threshold are constant during their execution. Otherwise, checks like if (fc->num_background == fc->max_background) made in different time may behave not like expected. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-09-28fuse: use READ_ONCE on congestion_threshold and max_backgroundKirill Tkhai1-2/+2
Since they are of unsigned int type, it's allowed to read them unlocked during reporting to userspace. Let's underline this fact with READ_ONCE() macroses. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-09-28fuse: use list_first_entry() in flush_bg_queue()Kirill Tkhai1-2/+3
This cleanup patch makes the function to use the primitive instead of direct dereferencing. Also, move fiq dereferencing out of cycle, since it's always constant. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-09-28fuse: add support for copy_file_range()Niels de Vos2-0/+80
There are several FUSE filesystems that can implement server-side copy or other efficient copy/duplication/clone methods. The copy_file_range() syscall is the standard interface that users have access to while not depending on external libraries that bypass FUSE. Signed-off-by: Niels de Vos <ndevos@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-09-28fuse: fix blocked_waitq wakeupMiklos Szeredi1-4/+11
Using waitqueue_active() is racy. Make sure we issue a wake_up() unconditionally after storing into fc->blocked. After that it's okay to optimize with waitqueue_active() since the first wake up provides the necessary barrier for all waiters, not the just the woken one. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Fixes: 3c18ef8117f0 ("fuse: optimize wake_up") Cc: <stable@vger.kernel.org> # v3.10
2018-09-28fuse: set FR_SENT while lockedMiklos Szeredi1-1/+1
Otherwise fuse_dev_do_write() could come in and finish off the request, and the set_bit(FR_SENT, ...) could trigger the WARN_ON(test_bit(FR_SENT, ...)) in request_end(). Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Reported-by: syzbot+ef054c4d3f64cd7f7cec@syzkaller.appspotmai Fixes: 46c34a348b0a ("fuse: no fc->lock for pqueue parts") Cc: <stable@vger.kernel.org> # v4.2
2018-09-28fuse: Fix use-after-free in fuse_dev_do_write()Kirill Tkhai1-1/+5
After we found req in request_find() and released the lock, everything may happen with the req in parallel: cpu0 cpu1 fuse_dev_do_write() fuse_dev_do_write() req = request_find(fpq, ...) ... spin_unlock(&fpq->lock) ... ... req = request_find(fpq, oh.unique) ... spin_unlock(&fpq->lock) queue_interrupt(&fc->iq, req); ... ... ... ... ... request_end(fc, req); fuse_put_request(fc, req); ... queue_interrupt(&fc->iq, req); Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Fixes: 46c34a348b0a ("fuse: no fc->lock for pqueue parts") Cc: <stable@vger.kernel.org> # v4.2
2018-09-28fuse: Fix use-after-free in fuse_dev_do_read()Kirill Tkhai1-0/+2
We may pick freed req in this way: [cpu0] [cpu1] fuse_dev_do_read() fuse_dev_do_write() list_move_tail(&req->list, ...); ... spin_unlock(&fpq->lock); ... ... request_end(fc, req); ... fuse_put_request(fc, req); if (test_bit(FR_INTERRUPTED, ...)) queue_interrupt(fiq, req); Fix that by keeping req alive until we finish all manipulations. Reported-by: syzbot+4e975615ca01f2277bdd@syzkaller.appspotmail.com Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Fixes: 46c34a348b0a ("fuse: no fc->lock for pqueue parts") Cc: <stable@vger.kernel.org> # v4.2
2018-08-21Merge tag 'fuse-update-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuseLinus Torvalds5-52/+80
Pull fuse update from Miklos Szeredi: "Various bug fixes and cleanups" * tag 'fuse-update-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: reduce allocation size for splice_write fuse: use kvmalloc to allocate array of pipe_buffer structs. fuse: convert last timespec use to timespec64 fs: fuse: Adding new return type vm_fault_t fuse: simplify fuse_abort_conn() fuse: Add missed unlock_page() to fuse_readpages_fill() fuse: Don't access pipe->buffers without pipe_lock() fuse: fix initial parallel dirops fuse: Fix oops at process_init_reply() fuse: umount should wait for all requests fuse: fix unlocked access to processing queue fuse: fix double request_end()
2018-08-21Merge branch 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespaceLinus Torvalds1-0/+1
Pull core signal handling updates from Eric Biederman: "It was observed that a periodic timer in combination with a sufficiently expensive fork could prevent fork from every completing. This contains the changes to remove the need for that restart. This set of changes is split into several parts: - The first part makes PIDTYPE_TGID a proper pid type instead something only for very special cases. The part starts using PIDTYPE_TGID enough so that in __send_signal where signals are actually delivered we know if the signal is being sent to a a group of processes or just a single process. - With that prep work out of the way the logic in fork is modified so that fork logically makes signals received while it is running appear to be received after the fork completes" * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (22 commits) signal: Don't send signals to tasks that don't exist signal: Don't restart fork when signals come in. fork: Have new threads join on-going signal group stops fork: Skip setting TIF_SIGPENDING in ptrace_init_task signal: Add calculate_sigpending() fork: Unconditionally exit if a fatal signal is pending fork: Move and describe why the code examines PIDNS_ADDING signal: Push pid type down into complete_signal. signal: Push pid type down into __send_signal signal: Push pid type down into send_signal signal: Pass pid type into do_send_sig_info signal: Pass pid type into send_sigio_to_task & send_sigurg_to_task signal: Pass pid type into group_send_sig_info signal: Pass pid and pid type into send_sigqueue posix-timers: Noralize good_sigevent signal: Use PIDTYPE_TGID to clearly store where file signals will be sent pid: Implement PIDTYPE_TGID pids: Move the pgrp and session pid pointers from task_struct to signal_struct kvm: Don't open code task_pid in kvm_vcpu_ioctl pids: Compute task_tgid using signal->leader_pid ...
2018-08-13Merge branch 'work.mkdir' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds1-4/+11
Pull vfs icache updates from Al Viro: - NFS mkdir/open_by_handle race fix - analogous solution for FUSE, replacing the one currently in mainline - new primitive to be used when discarding halfway set up inodes on failed object creation; gives sane warranties re icache lookups not returning such doomed by still not freed inodes. A bunch of filesystems switched to that animal. - Miklos' fix for last cycle regression in iget5_locked(); -stable will need a slightly different variant, unfortunately. - misc bits and pieces around things icache-related (in adfs and jfs). * 'work.mkdir' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: jfs: don't bother with make_bad_inode() in ialloc() adfs: don't put inodes into icache new helper: inode_fake_hash() vfs: don't evict uninitialized inode jfs: switch to discard_new_inode() ext2: make sure that partially set up inodes won't be returned by ext2_iget() udf: switch to discard_new_inode() ufs: switch to discard_new_inode() btrfs: switch to discard_new_inode() new primitive: discard_new_inode() kill d_instantiate_no_diralias() nfs_instantiate(): prevent multiple aliases for directory inode
2018-08-01kill d_instantiate_no_diralias()Al Viro1-4/+11
The only user is fuse_create_new_entry(), and there it's used to mitigate the same mkdir/open-by-handle race as in nfs_mkdir(). The same solution applies - unhash the mkdir argument, then call d_splice_alias() and if that returns a reference to preexisting alias, dput() and report success. ->mkdir() argument left unhashed negative with the preexisting alias moved in the right place is just fine from the ->mkdir() callers point of view. Cc: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-07-26fuse: reduce allocation size for splice_writeAndrey Ryabinin1-1/+1
The 'bufs' array contains 'pipe->buffers' elements, but the fuse_dev_splice_write() uses only 'pipe->nrbufs' elements. So reduce the allocation size to 'pipe->nrbufs' elements. Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-07-26fuse: use kvmalloc to allocate array of pipe_buffer structs.Andrey Ryabinin1-6/+6
The amount of pipe->buffers is basically controlled by userspace by fcntl(... F_SETPIPE_SZ ...) so it could be large. High order allocations could be slow (if memory is heavily fragmented) or may fail if the order is larger than PAGE_ALLOC_COSTLY_ORDER. Since the 'bufs' doesn't need to be physically contiguous, use the kvmalloc_array() to allocate memory. If high order page isn't available, the kvamalloc*() will fallback to 0-order. Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-07-26fuse: convert last timespec use to timespec64Arnd Bergmann1-4/+4
All of fuse uses 64-bit timestamps with the exception of the fuse_change_attributes(), so let's convert this one as well. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-07-26fs: fuse: Adding new return type vm_fault_tSouptick Joarder1-1/+1
Use new return type vm_fault_t for fault handler in struct vm_operations_struct. For now, this is just documenting that the function returns a VM_FAULT value rather than an errno. Once all instances are converted, vm_fault_t will become a distinct type. commit 1c8f422059ae ("mm: change return type to vm_fault_t") Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-07-26fuse: simplify fuse_abort_conn()Miklos Szeredi1-12/+6
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-07-26fuse: Add missed unlock_page() to fuse_readpages_fill()Kirill Tkhai1-0/+1
The above error path returns with page unlocked, so this place seems also to behave the same. Fixes: f8dbdf81821b ("fuse: rework fuse_readpages()") Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-07-26fuse: Don't access pipe->buffers without pipe_lock()Andrey Ryabinin1-2/+5
fuse_dev_splice_write() reads pipe->buffers to determine the size of 'bufs' array before taking the pipe_lock(). This is not safe as another thread might change the 'pipe->buffers' between the allocation and taking the pipe_lock(). So we end up with too small 'bufs' array. Move the bufs allocations inside pipe_lock()/pipe_unlock() to fix this. Fixes: dd3bb14f44a6 ("fuse: support splice() writing to fuse device") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: <stable@vger.kernel.org> # v2.6.35 Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-07-26fuse: fix initial parallel diropsMiklos Szeredi3-10/+18
If parallel dirops are enabled in FUSE_INIT reply, then first operation may leave fi->mutex held. Reported-by: syzbot <syzbot+3f7b29af1baa9d0a55be@syzkaller.appspotmail.com> Fixes: 5c672ab3f0ee ("fuse: serialize dirops by default") Cc: <stable@vger.kernel.org> # v4.7 Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-07-26fuse: Fix oops at process_init_reply()Miklos Szeredi1-14/+11
syzbot is hitting NULL pointer dereference at process_init_reply(). This is because deactivate_locked_super() is called before response for initial request is processed. Fix this by aborting and waiting for all requests (including FUSE_INIT) before resetting fc->sb. Original patch by Tetsuo Handa <penguin-kernel@I-love.SKAURA.ne.jp>. Reported-by: syzbot <syzbot+b62f08f4d5857755e3bc@syzkaller.appspotmail.com> Fixes: e27c9d3877a0 ("fuse: fuse: add time_gran to INIT_OUT") Cc: <stable@vger.kernel.org> # v3.19 Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-07-26fuse: umount should wait for all requestsMiklos Szeredi3-4/+22
fuse_abort_conn() does not guarantee that all async requests have actually finished aborting (i.e. their ->end() function is called). This could actually result in still used inodes after umount. Add a helper to wait until all requests are fully done. This is done by looking at the "num_waiting" counter. When this counter drops to zero, we can be sure that no more requests are outstanding. Fixes: 0d8e84b0432b ("fuse: simplify request abort") Cc: <stable@vger.kernel.org> # v4.2 Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-07-26fuse: fix unlocked access to processing queueMiklos Szeredi1-1/+7
fuse_dev_release() assumes that it's the only one referencing the fpq->processing list, but that's not true, since fuse_abort_conn() can be doing the same without any serialization between the two. Fixes: c3696046beb3 ("fuse: separate pqueue for clones") Cc: <stable@vger.kernel.org> # v4.2 Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-07-26fuse: fix double request_end()Miklos Szeredi1-2/+3
Refcounting of request is broken when fuse_abort_conn() is called and request is on the fpq->io list: - ref is taken too late - then it is not dropped Fixes: 0d8e84b0432b ("fuse: simplify request abort") Cc: <stable@vger.kernel.org> # v4.2 Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-07-21pids: Compute task_tgid using signal->leader_pidEric W. Biederman1-0/+1
The cost is the the same and this removes the need to worry about complications that come from de_thread and group_leader changing. __task_pid_nr_ns has been updated to take advantage of this change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-07-12get rid of 'opened' argument of ->atomic_open() - part 3Al Viro1-1/+1
now it can be done... Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-07-12getting rid of 'opened' argument of ->atomic_open() - part 2Al Viro1-2/+2
__gfs2_lookup(), gfs2_create_inode(), nfs_finish_open() and fuse_create_open() don't need 'opened' anymore. Get rid of that argument in those. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-07-12getting rid of 'opened' argument of ->atomic_open() - part 1Al Viro1-1/+1
'opened' argument of finish_open() is unused. Kill it. Signed-off-by Al Viro <viro@zeniv.linux.org.uk>
2018-07-12introduce FMODE_CREATED and switch to itAl Viro1-1/+1
Parallel to FILE_CREATED, goes into ->f_mode instead of *opened. NFS is a bit of a wart here - it doesn't have file at the point where FILE_CREATED used to be set, so we need to propagate it there (for now). IMA is another one (here and everywhere)... Note that this needs do_dentry_open() to leave old bits in ->f_mode alone - we want it to preserve FMODE_CREATED if it had been already set (no other bit can be there). Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-06-15Merge tag 'vfs-timespec64' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playgroundLinus Torvalds1-1/+1
Pull inode timestamps conversion to timespec64 from Arnd Bergmann: "This is a late set of changes from Deepa Dinamani doing an automated treewide conversion of the inode and iattr structures from 'timespec' to 'timespec64', to push the conversion from the VFS layer into the individual file systems. As Deepa writes: 'The series aims to switch vfs timestamps to use struct timespec64. Currently vfs uses struct timespec, which is not y2038 safe. The series involves the following: 1. Add vfs helper functions for supporting struct timepec64 timestamps. 2. Cast prints of vfs timestamps to avoid warnings after the switch. 3. Simplify code using vfs timestamps so that the actual replacement becomes easy. 4. Convert vfs timestamps to use struct timespec64 using a script. This is a flag day patch. Next steps: 1. Convert APIs that can handle timespec64, instead of converting timestamps at the boundaries. 2. Update internal data structures to avoid timestamp conversions' Thomas Gleixner adds: 'I think there is no point to drag that out for the next merge window. The whole thing needs to be done in one go for the core changes which means that you're going to play that catchup game forever. Let's get over with it towards the end of the merge window'" * tag 'vfs-timespec64' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground: pstore: Remove bogus format string definition vfs: change inode times to use struct timespec64 pstore: Convert internal records to timespec64 udf: Simplify calls to udf_disk_stamp_to_time fs: nfs: get rid of memcpys for inode times ceph: make inode time prints to be long long lustre: Use long long type to print inode time fs: add timespec64_truncate()
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook1-5/+10
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-07Merge tag 'fuse-update-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuseLinus Torvalds8-62/+164
Pull fuse updates from Miklos Szeredi: "The most interesting part of this update is user namespace support, mostly done by Eric Biederman. This enables safe unprivileged fuse mounts within a user namespace. There are also a couple of fixes for bugs found by syzbot and miscellaneous fixes and cleanups" * tag 'fuse-update-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: don't keep dead fuse_conn at fuse_fill_super(). fuse: fix control dir setup and teardown fuse: fix congested state leak on aborted connections fuse: Allow fully unprivileged mounts fuse: Ensure posix acls are translated outside of init_user_ns fuse: add writeback documentation fuse: honor AT_STATX_FORCE_SYNC fuse: honor AT_STATX_DONT_SYNC fuse: Restrict allow_other to the superblock's namespace or a descendant fuse: Support fuse filesystems outside of init_user_ns fuse: Fail all requests with invalid uids or gids fuse: Remove the buggy retranslation of pids in fuse_dev_do_read fuse: return -ECONNABORTED on /dev/fuse read after abort fuse: atomic_o_trunc should truncate pagecache
2018-06-05vfs: change inode times to use struct timespec64Deepa Dinamani1-1/+1
struct timespec is not y2038 safe. Transition vfs to use y2038 safe struct timespec64 instead. The change was made with the help of the following cocinelle script. This catches about 80% of the changes. All the header file and logic changes are included in the first 5 rules. The rest are trivial substitutions. I avoid changing any of the function signatures or any other filesystem specific data structures to keep the patch simple for review. The script can be a little shorter by combining different cases. But, this version was sufficient for my usecase. virtual patch @ depends on patch @ identifier now; @@ - struct timespec + struct timespec64 current_time ( ... ) { - struct timespec now = current_kernel_time(); + struct timespec64 now = current_kernel_time64(); ... - return timespec_trunc( + return timespec64_trunc( ... ); } @ depends on patch @ identifier xtime; @@ struct \( iattr \| inode \| kstat \) { ... - struct timespec xtime; + struct timespec64 xtime; ... } @ depends on patch @ identifier t; @@ struct inode_operations { ... int (*update_time) (..., - struct timespec t, + struct timespec64 t, ...); ... } @ depends on patch @ identifier t; identifier fn_update_time =~ "update_time$"; @@ fn_update_time (..., - struct timespec *t, + struct timespec64 *t, ...) { ... } @ depends on patch @ identifier t; @@ lease_get_mtime( ... , - struct timespec *t + struct timespec64 *t ) { ... } @te depends on patch forall@ identifier ts; local idexpression struct inode *inode_node; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; identifier fn_update_time =~ "update_time$"; identifier fn; expression e, E3; local idexpression struct inode *node1; local idexpression struct inode *node2; local idexpression struct iattr *attr1; local idexpression struct iattr *attr2; local idexpression struct iattr attr; identifier i_xtime1 =~ "^i_[acm]time$"; identifier i_xtime2 =~ "^i_[acm]time$"; identifier ia_xtime1 =~ "^ia_[acm]time$"; identifier ia_xtime2 =~ "^ia_[acm]time$"; @@ ( ( - struct timespec ts; + struct timespec64 ts; | - struct timespec ts = current_time(inode_node); + struct timespec64 ts = current_time(inode_node); ) <+... when != ts ( - timespec_equal(&inode_node->i_xtime, &ts) + timespec64_equal(&inode_node->i_xtime, &ts) | - timespec_equal(&ts, &inode_node->i_xtime) + timespec64_equal(&ts, &inode_node->i_xtime) | - timespec_compare(&inode_node->i_xtime, &ts) + timespec64_compare(&inode_node->i_xtime, &ts) | - timespec_compare(&ts, &inode_node->i_xtime) + timespec64_compare(&ts, &inode_node->i_xtime) | ts = current_time(e) | fn_update_time(..., &ts,...) | inode_node->i_xtime = ts | node1->i_xtime = ts | ts = inode_node->i_xtime | <+... attr1->ia_xtime ...+> = ts | ts = attr1->ia_xtime | ts.tv_sec | ts.tv_nsec | btrfs_set_stack_timespec_sec(..., ts.tv_sec) | btrfs_set_stack_timespec_nsec(..., ts.tv_nsec) | - ts = timespec64_to_timespec( + ts = ... -) | - ts = ktime_to_timespec( + ts = ktime_to_timespec64( ...) | - ts = E3 + ts = timespec_to_timespec64(E3) | - ktime_get_real_ts(&ts) + ktime_get_real_ts64(&ts) | fn(..., - ts + timespec64_to_timespec(ts) ,...) ) ...+> ( <... when != ts - return ts; + return timespec64_to_timespec(ts); ...> ) | - timespec_equal(&node1->i_xtime1, &node2->i_xtime2) + timespec64_equal(&node1->i_xtime2, &node2->i_xtime2) | - timespec_equal(&node1->i_xtime1, &attr2->ia_xtime2) + timespec64_equal(&node1->i_xtime2, &attr2->ia_xtime2) | - timespec_compare(&node1->i_xtime1, &node2->i_xtime2) + timespec64_compare(&node1->i_xtime1, &node2->i_xtime2) | node1->i_xtime1 = - timespec_trunc(attr1->ia_xtime1, + timespec64_trunc(attr1->ia_xtime1, ...) | - attr1->ia_xtime1 = timespec_trunc(attr2->ia_xtime2, + attr1->ia_xtime1 = timespec64_trunc(attr2->ia_xtime2, ...) | - ktime_get_real_ts(&attr1->ia_xtime1) + ktime_get_real_ts64(&attr1->ia_xtime1) | - ktime_get_real_ts(&attr.ia_xtime1) + ktime_get_real_ts64(&attr.ia_xtime1) ) @ depends on patch @ struct inode *node; struct iattr *attr; identifier fn; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; expression e; @@ ( - fn(node->i_xtime); + fn(timespec64_to_timespec(node->i_xtime)); | fn(..., - node->i_xtime); + timespec64_to_timespec(node->i_xtime)); | - e = fn(attr->ia_xtime); + e = fn(timespec64_to_timespec(attr->ia_xtime)); ) @ depends on patch forall @ struct inode *node; struct iattr *attr; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; identifier fn; @@ { + struct timespec ts; <+... ( + ts = timespec64_to_timespec(node->i_xtime); fn (..., - &node->i_xtime, + &ts, ...); | + ts = timespec64_to_timespec(attr->ia_xtime); fn (..., - &attr->ia_xtime, + &ts, ...); ) ...+> } @ depends on patch forall @ struct inode *node; struct iattr *attr; struct kstat *stat; identifier ia_xtime =~ "^ia_[acm]time$"; identifier i_xtime =~ "^i_[acm]time$"; identifier xtime =~ "^[acm]time$"; identifier fn, ret; @@ { + struct timespec ts; <+... ( + ts = timespec64_to_timespec(node->i_xtime); ret = fn (..., - &node->i_xtime, + &ts, ...); | + ts = timespec64_to_timespec(node->i_xtime); ret = fn (..., - &node->i_xtime); + &ts); | + ts = timespec64_to_timespec(attr->ia_xtime); ret = fn (..., - &attr->ia_xtime, + &ts, ...); | + ts = timespec64_to_timespec(attr->ia_xtime); ret = fn (..., - &attr->ia_xtime); + &ts); | + ts = timespec64_to_timespec(stat->xtime); ret = fn (..., - &stat->xtime); + &ts); ) ...+> } @ depends on patch @ struct inode *node; struct inode *node2; identifier i_xtime1 =~ "^i_[acm]time$"; identifier i_xtime2 =~ "^i_[acm]time$"; identifier i_xtime3 =~ "^i_[acm]time$"; struct iattr *attrp; struct iattr *attrp2; struct iattr attr ; identifier ia_xtime1 =~ "^ia_[acm]time$"; identifier ia_xtime2 =~ "^ia_[acm]time$"; struct kstat *stat; struct kstat stat1; struct timespec64 ts; identifier xtime =~ "^[acmb]time$"; expression e; @@ ( ( node->i_xtime2 \| attrp->ia_xtime2 \| attr.ia_xtime2 \) = node->i_xtime1 ; | node->i_xtime2 = \( node2->i_xtime1 \| timespec64_trunc(...) \); | node->i_xtime2 = node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \); | node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \); | stat->xtime = node2->i_xtime1; | stat1.xtime = node2->i_xtime1; | ( node->i_xtime2 \| attrp->ia_xtime2 \) = attrp->ia_xtime1 ; | ( attrp->ia_xtime1 \| attr.ia_xtime1 \) = attrp2->ia_xtime2; | - e = node->i_xtime1; + e = timespec64_to_timespec( node->i_xtime1 ); | - e = attrp->ia_xtime1; + e = timespec64_to_timespec( attrp->ia_xtime1 ); | node->i_xtime1 = current_time(...); | node->i_xtime2 = node->i_xtime1 = node->i_xtime3 = - e; + timespec_to_timespec64(e); | node->i_xtime1 = node->i_xtime3 = - e; + timespec_to_timespec64(e); | - node->i_xtime1 = e; + node->i_xtime1 = timespec_to_timespec64(e); ) Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Cc: <anton@tuxera.com> Cc: <balbi@kernel.org> Cc: <bfields@fieldses.org> Cc: <darrick.wong@oracle.com> Cc: <dhowells@redhat.com> Cc: <dsterba@suse.com> Cc: <dwmw2@infradead.org> Cc: <hch@lst.de> Cc: <hirofumi@mail.parknet.co.jp> Cc: <hubcap@omnibond.com> Cc: <jack@suse.com> Cc: <jaegeuk@kernel.org> Cc: <jaharkes@cs.cmu.edu> Cc: <jslaby@suse.com> Cc: <keescook@chromium.org> Cc: <mark@fasheh.com> Cc: <miklos@szeredi.hu> Cc: <nico@linaro.org> Cc: <reiserfs-devel@vger.kernel.org> Cc: <richard@nod.at> Cc: <sage@redhat.com> Cc: <sfrench@samba.org> Cc: <swhiteho@redhat.com> Cc: <tj@kernel.org> Cc: <trond.myklebust@primarydata.com> Cc: <tytso@mit.edu> Cc: <viro@zeniv.linux.org.uk>
2018-05-31fuse: don't keep dead fuse_conn at fuse_fill_super().Tetsuo Handa1-0/+1
syzbot is reporting use-after-free at fuse_kill_sb_blk() [1]. Since sb->s_fs_info field is not cleared after fc was released by fuse_conn_put() when initialization failed, fuse_kill_sb_blk() finds already released fc and tries to hold the lock. Fix this by clearing sb->s_fs_info field after calling fuse_conn_put(). [1] https://syzkaller.appspot.com/bug?id=a07a680ed0a9290585ca424546860464dd9658db Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by: syzbot <syzbot+ec3986119086fe4eec97@syzkaller.appspotmail.com> Fixes: 3b463ae0c626 ("fuse: invalidation reverse calls") Cc: John Muir <john@jmuir.com> Cc: Csaba Henk <csaba@gluster.com> Cc: Anand Avati <avati@redhat.com> Cc: <stable@vger.kernel.org> # v2.6.31 Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-05-31fuse: fix control dir setup and teardownMiklos Szeredi1-3/+10
syzbot is reporting NULL pointer dereference at fuse_ctl_remove_conn() [1]. Since fc->ctl_ndents is incremented by fuse_ctl_add_conn() when new_inode() failed, fuse_ctl_remove_conn() reaches an inode-less dentry and tries to clear d_inode(dentry)->i_private field. Fix by only adding the dentry to the array after being fully set up. When tearing down the control directory, do d_invalidate() on it to get rid of any mounts that might have been added. [1] https://syzkaller.appspot.com/bug?id=f396d863067238959c91c0b7cfc10b163638cac6 Reported-by: syzbot <syzbot+32c236387d66c4516827@syzkaller.appspotmail.com> Fixes: bafa96541b25 ("[PATCH] fuse: add control filesystem") Cc: <stable@vger.kernel.org> # v2.6.18 Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-05-31fuse: fix congested state leak on aborted connectionsTejun Heo1-2/+1
If a connection gets aborted while congested, FUSE can leave nr_wb_congested[] stuck until reboot causing wait_iff_congested() to wait spuriously which can lead to severe performance degradation. The leak is caused by gating congestion state clearing with fc->connected test in request_end(). This was added way back in 2009 by 26c3679101db ("fuse: destroy bdi on umount"). While the commit description doesn't explain why the test was added, it most likely was to avoid dereferencing bdi after it got destroyed. Since then, bdi lifetime rules have changed many times and now we're always guaranteed to have access to the bdi while the superblock is alive (fc->sb). Drop fc->connected conditional to avoid leaking congestion states. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Joshua Miller <joshmiller@fb.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: stable@vger.kernel.org # v2.6.29+ Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.