aboutsummaryrefslogtreecommitdiffstats
path: root/fs/gfs2 (follow)
AgeCommit message (Collapse)AuthorFilesLines
2006-11-30[GFS2] Fix recursive locking in gfs2_permissionSteven Whitehouse1-6/+13
Since gfs2_permission may be called either from the VFS (in which case we need to obtain a shared glock) or from GFS2 (in which case we already have a glock) we need to test to see whether or not a lock is required. The original test was buggy due to a potential race. This one should be safe. This fixes Red Hat bugzilla #217129 Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] Reduce number of arguments to meta_io.c:getbuf()Steven Whitehouse1-14/+12
Since the superblock and the address_space are determined by the glock, we might as well just pass that as the argument since all the callers already have that available. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] Move gfs2_meta_syncfs() into log.cSteven Whitehouse4-20/+21
By moving gfs2_meta_syncfs() into log.c, gfs2_ail1_start() can be made static. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] Fix journal flush problemSteven Whitehouse7-99/+46
This fixes a bug which resulted in poor performance due to flushing the journal too often. The code path in question was via the inode_go_sync() function in glops.c. The solution is not to flush the journal immediately when inodes are ejected from memory, but batch up the work for glockd to deal with later on. This means that glocks may now live on beyond the end of the lifetime of their inodes (but not very much longer in the normal case). Also fixed in this patch is a bug (which was hidden by the bug mentioned above) in calculation of the number of free journal blocks. The gfs2_logd process has been altered to be more responsive to the journal filling up. We now wake it up when the number of uncommitted journal blocks has reached the threshold level rather than trying to flush directly at the end of each transaction. This again means doing fewer, but larger, log flushes in general. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] mark_inode_dirty after write to stuffed fileSteven Whitehouse1-1/+3
Writes to stuffed files were not being marked dirty correctly. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] Fix glock ordering on inode creationSteven Whitehouse1-27/+4
The lock order here should be parent -> child rather than numeric order. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] Simplify glops functionsSteven Whitehouse4-51/+28
The go_sync callback took two flags, but one of them was set on every call, so this patch removes once of the flags and makes the previously conditional operations (on this flag), unconditional. The go_inval callback took three flags, each of which was set on every call to it. This patch removes the flags and makes the operations unconditional, which makes the logic rather more obvious. Two now unused flags are also removed from incore.h. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] Fix Kconfig wrt CRC32Steven Whitehouse1-0/+1
GFS2 requires the CRC32 library function. This was reported by Toralf Förster. Cc: Toralf Förster <toralf.foerster@gmx.de> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] Make sentinel dirents compatible with gfs1Steven Whitehouse1-10/+16
When deleting directory entries, we set the inum.no_addr to zero in a dirent when its the first dirent in a block and thus cannot be merged into the previous dirent as is the usual case. In gfs1, inum.no_formal_ino was used instead. This patch changes gfs2 to set both inum.no_addr and inum.no_formal_ino to zero. It also changes the test from just looking at inum.no_addr to look at both inum.no_addr and inum.no_formal_ino and a sentinel is now considered to be a dirent in which _either_ (or both) of them is set to zero. This resolves Red Hat bugzillas: #215809, #211465 Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] Remove unused function from inode.cSteven Whitehouse4-95/+5
The gfs2_glock_nq_m_atime function is unused in so far as its only ever called with num_gh = 1, and this falls through to the gfs2_glock_nq_atime function, so we might as well call that directly. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] Remove unused sysfs filesSteven Whitehouse1-8/+0
Four of the sysfs files are unused and can therefore be removed. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] Tidy up bmap & fix boundary bugSteven Whitehouse1-63/+54
This moves the locking for bmap into the bmap function itself rather than using a wrapper function. It also fixes a bug where the boundary flag was set on the wrong bh. Also the flags on the mapped bh are reset earlier in the function to ensure that they are 100% correct on the error path. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] Fix memory allocation in glock.cSteven Whitehouse1-1/+1
Change from GFP_KERNEL to GFP_NOFS as this was causing a slow down when trying to push inodes from cache. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] Remove unused zero_readpage from stuffed_readpageRussell Cattelan1-16/+4
Stuffed files only consist of a maximum of (gfs2 block size - sizeof(struct gfs2_dinode)) bytes. Since the gfs2 block size is always less than page size, we will never see a call to stuffed_readpage for anything other than the first page in the file. Signed-off-by: Russell Cattelan <cattelan@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] Fix race in logging codeRussell Cattelan1-15/+21
The log lock is dropped prior to io submittion, but this exposes a hole in which the log data structures may be going away due to a truncate. Store the buffer head in a local pointer prior to dropping the lock and relay on the buffer_head lock for consitency on the buffer head. Signed-Off-By: Russell Cattelan <cattelan@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] Remove gfs2_inode_attr_inSteven Whitehouse6-24/+26
This function wasn't really doing the right thing. There was no need to update the inode size at this point and the updating of the i_blocks field has now been moved to the places where di_blocks is updated. A result of this patch and some those preceeding it is that unlocking a glock is now a much more efficient process, since there is no longer any requirement to copy data from the gfs2 inode into the vfs inode at this point. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] Inode number is constantSteven Whitehouse1-1/+1
Since the inode number is constant, we don't need to keep updating it everytime we refresh the other inode fields. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] Only set inode flags when requiredSteven Whitehouse3-11/+21
We were setting the inode flags from GFS2's flags far too often, even when they couldn't possibly have changed. This patch reduces the amount of flag setting going on so that we do it only when the inode is read in or when the flags have changed. The create case is covered by the "when the inode is read in" case. This also fixes a bug where we didn't set S_SYNC correctly. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] Fix page lock/glock deadlockSteven Whitehouse2-5/+9
This fixes a race between the glock and the page lock encountered during truncate in gfs2_readpage and gfs2_prepare_write. The gfs2_readpages function doesn't need the same fix since it only uses a try lock anyway, so it will fail back to gfs2_readpage in the case of a potential deadlock. This bug was spotted by Russell Cattelan. Cc: Russell Cattelan <cattelan@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] Remove unused GL_DUMP flagSteven Whitehouse2-4/+0
There is no way to set the GL_DUMP flag, and in any case the same thing can be done with systemtap if required for debugging, so this removes it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] Don't copy meta_header for rgrp in and outSteven Whitehouse1-11/+0
The meta_header for an ondisk rgrp never changes, so there is no point copying it in and back out to disk. Also there is no reason to keep a copy for each rgrp in memory. The code already checks to ensure that the header is correct before it calls the routine to copy the data in, so that we don't even need to check whether its correct on disk in the functions in ondisk.c Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] Tidy up 0 initialisations in inode.cSteven Whitehouse1-7/+7
We don't need to use endian conversions for 0 initialisations when creating a new on-disk inode. Cc: Christoph Hellwig <hch@infradead.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] Shrink gfs2_inode (8) - i_vnSteven Whitehouse4-6/+7
This shrinks the size of the gfs2_inode by 8 bytes by replacing the version counter with a one bit valid/invalid flag. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] Shrink gfs2_inode (7) - di_payload_formatSteven Whitehouse4-7/+4
This is almost never used. Its there for backward compatibility with GFS1. It doesn't need its own field since it can always be calculated from the inode mode & flags. This saves a bit more space in the gfs2_inode. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] Shrink gfs2_inode (6) - di_atime/di_mtime/di_ctimeSteven Whitehouse8-62/+29
Remove the di_[amc]time fields and use inode->i_[amc]time fields instead. This saves 24 bytes from the gfs2_inode. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] Shrink gfs2_inode (5) - di_nlinkSteven Whitehouse3-21/+31
Remove the di_nlink field in favour of inode->i_nlink and update the nlink handling to use the proper macros. This saves 4 bytes. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] Shrink gfs2_inode (4) - di_uid/di_gidSteven Whitehouse10-39/+29
Remove duplicate di_uid/di_gid fields in favour of using inode->i_uid/inode->i_gid instead. This saves 8 bytes. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] Shrink gfs2_inode (3) - di_modeSteven Whitehouse14-48/+41
This removes the duplicate di_mode field in favour of using the inode->i_mode field. This saves 4 bytes. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] Shrink gfs2_inode (2) - di_major/di_minorSteven Whitehouse4-58/+22
This removes the device numbers from this structure by using inode->i_rdev instead. It also cleans up the code in gfs2_mknod. It results in shrinking the gfs2_inode by 8 bytes. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] Shrink gfs2_inode (1) - di_header/di_numSteven Whitehouse2-27/+20
The metadata header doesn't need to be stored in the incore struct gfs2_inode since its constant, and this patch removes it. Also, there is already a field for the inode's number in the struct gfs2_inode, so we don't need one in struct gfs2_dinode_host as well. This saves 28 bytes of space in the struct gfs2_inode. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] Change argument to gfs2_dinode_printSteven Whitehouse3-7/+9
Change argument for gfs2_dinode_print in order to prepare for removal of duplicate fields between struct inode and struct gfs2_dinode_host. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] Move gfs2_dinode_in to inode.cSteven Whitehouse2-35/+35
gfs2_dinode_in() is only ever called from one place, so move it to that place (in inode.c) and make it static. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] Change argument to gfs2_dinode_inSteven Whitehouse2-3/+3
This is a preliminary patch to enable the removal of fields in gfs2_dinode_host which are duplicated in struct inode. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] Change argument of gfs2_dinode_outSteven Whitehouse8-34/+37
Everywhere this was called, a struct gfs2_inode was available, but despite that, it was always called with a struct gfs2_dinode as an argument. By making this change it paves the way to start eliminating fields duplicated between the kernel's struct inode and the struct gfs2_dinode. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] gfs2 __user misannotation fixAl Viro1-2/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] gfs2 misc endianness annotationsAl Viro8-71/+66
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] split and annotate gfs2_quota_changeAl Viro2-2/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] split and annotate gfs2_statfs_changeAl Viro5-18/+18
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] split and annotate gfs2_quotaAl Viro2-2/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] split and annotate gfs2_inumAl Viro11-34/+34
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] split and annotate gfs_rindexAl Viro3-4/+4
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] split and annotate gfs2_meta_headerAl Viro1-3/+3
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] Fix crc32 calculation in recovery.cSteven Whitehouse1-4/+5
Commit "[GFS2] split and annotate gfs2_log_head" resulted in an incorrect checksum calculation for log headers. This patch corrects the problem without resorting to copying the whole log header as the previous code used to. Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] split and annotate gfs2_log_headAl Viro8-20/+20
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] split and annotate gfs2_inum_rangeAl Viro2-4/+4
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] split and annotate gfs2_rgrpAl Viro2-3/+3
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] split gfs2_sbAl Viro4-4/+4
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] gfs2_dinode_host fields are host-endianAl Viro1-1/+1
Annotated scalar fields, dropped unused ones. Note that it's not at all obvious that we want to convert all of them to host-endian... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] split gfs2_dinode into on-disk and host variantsAl Viro2-5/+5
The latter is used as part of gfs2-private part of struct inode. It actually stores a lot of fields differently; for now the declaration is just cloned, inode field is swtiched and changes propagated. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-22WorkStruct: make allyesconfigDavid Howells1-4/+4
Fix up for make allyesconfig. Signed-Off-By: David Howells <dhowells@redhat.com>