aboutsummaryrefslogtreecommitdiffstats
path: root/fs/nfs/nfs42xdr.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-10-09NFS: add ca_source_server<> to COPYOlga Kornievskaia1-2/+10
Support only one source server address: the same address that the client and source server use. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
2019-10-09NFS: add COPY_NOTIFY operationOlga Kornievskaia1-0/+178
Try using the delegation stateid, then the open stateid. Only NL4_NETATTR, No support for NL4_NAME and NL4_URL. Allow only one source server address to be returned for now. To distinguish between same server copy offload ("intra") and a copy between different server ("inter"), do a check of server owner identity and also make sure server is capable of doing a copy offload. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
2019-03-01NFSv4.2: Add client support for the generic 'layouterror' RPC callTrond Myklebust1-0/+99
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-01NFS: Add missing encode / decode sequence_maxsz to v4.2 operationsAnna Schumaker1-0/+10
These really should have been there from the beginning, but we never noticed because there was enough slack in the RPC request for the extra bytes. Chuck's recent patch to use au_cslack and au_rslack to compute buffer size shrunk the buffer enough that this was now a problem for SEEK operations on my test client. Fixes: f4ac1674f5da4 ("nfs: Add ALLOCATE support") Fixes: 2e72448b07dc3 ("NFS: Add COPY nfs operation") Fixes: cb95deea0b4aa ("NFS OFFLOAD_CANCEL xdr") Fixes: 624bd5b7b683c ("nfs: Add DEALLOCATE support") Fixes: 1c6dcbe5ceff8 ("NFS: Implement SEEK") Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-02-13NFS: Remove print_overflow_msg()Chuck Lever1-16/+5
This issue is now captured by a trace point in the RPC client. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-08-09NFS add support for asynchronous COPYOlga Kornievskaia1-3/+5
Change xdr to always send COPY asynchronously. Keep the list copies send in a list under a server structure. Once copy is sent, it waits on a completion structure that will be signalled by the callback thread that receives CB_OFFLOAD. If CB_OFFLOAD returned an error and even if it returned partial bytes, ignore them (as we can't commit without a verifier to match) and return an error. Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-08-09NFS COPY xdr handle async replyOlga Kornievskaia1-10/+12
If server returns async reply, it must include a callback stateid, wr_callback_id in the write_response4. Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-08-09NFS OFFLOAD_CANCEL xdrOlga Kornievskaia1-0/+68
Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-15nfs: fix decoder callback prototypesChristoph Hellwig1-6/+12
Declare the p_decode callbacks with the proper prototype instead of casting to kxdrdproc_t and losing all type safety. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jeff Layton <jlayton@redhat.com> Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
2017-05-15nfs: fix encoder callback prototypesChristoph Hellwig1-14/+20
Declare the p_encode callbacks with the proper prototype instead of casting to kxdreproc_t and losing all type safety. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jeff Layton <jlayton@redhat.com> Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
2017-05-08NFS append COMMIT after synchronous COPYOlga Kornievskaia1-2/+20
Instead of messing with the commit path which has been causing issues, add a COMMIT op after the COPY and ask for stable copies in the first space. It saves a round trip, since after the COPY, the client sends a COMMIT anyway. Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-12-03pNFS/flexfiles: Minor refactoring before adding iostats to layoutreturnTrond Myklebust1-2/+3
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-07-24NFSv4.2: Fix warning "variable ‘stateids’ set but not used"Trond Myklebust1-2/+10
Replace it with a test for whether or not the sent a stateid in violation of what we asked for. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-05-17NFS: Add COPY nfs operationAnna Schumaker1-0/+146
This adds the copy_range file_ops function pointer used by the sys_copy_range() function call. This patch only implements sync copies, so if an async copy happens we decode the stateid and ignore it. Signed-off-by: Anna Schumaker <bjschuma@netapp.com>
2015-10-15nfs42: add CLONE xdr functionsPeng Tao1-1/+96
xdr definitions per draft-ietf-nfsv4-minorversion2-38.txt Signed-off-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-08-25nfs42: decode_layoutstats does not need res parameterPeng Tao1-3/+2
Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-06-27NFSv4.2: Fix up a decoding error in layoutstatsTrond Myklebust1-17/+1
According to the spec, the server is only returning the status, which we decode in the op header. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-06-24NFSv.2/pnfs Add a LAYOUTSTATS rpc functionTrond Myklebust1-0/+122
Reviewed-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-04-23NFS: Don't zap caches on fallocate()Anna Schumaker1-4/+16
This patch adds a GETATTR to the end of ALLOCATE and DEALLOCATE operations so we can set the updated inode size and change attribute directly. DEALLOCATE will still need to release pagecache pages, so nfs42_proc_deallocate() now calls truncate_pagecache_range() before contacting the server. Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-11-25nfs: Add DEALLOCATE supportAnna Schumaker1-0/+64
This patch adds support for using the NFS v4.2 operation DEALLOCATE to punch holes in a file. Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-11-25nfs: Add ALLOCATE supportAnna Schumaker1-0/+75
This patch adds support for using the NFS v4.2 operation ALLOCATE to preallocate data in a file. Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-09-30NFS: Implement SEEKAnna Schumaker1-0/+98
The SEEK operation is used when an application makes an lseek call with either the SEEK_HOLE or SEEK_DATA flags set. I fall back on nfs_file_llseek() if the server does not have SEEK support. Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>