| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add a check to disallow cross file systems copy offload, both
files are expected to be of NFS4.2+ type.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
|
|
For small file sizes, it make sense to issue a synchronous copy (and
save an RPC callback operation). Also, for the inter copy offload,
copy len must be larger than the cost of doing a mount between the
destination and source server (14RPCs are sent during 4.x mount).
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
|
|
When the source server reboots after a server-to-server copy was
issued, we need to retry the copy from COPY_NOTIFY. We need to
detect that the source server rebooted and there is a copy waiting
on a destination server and wake it up.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
|
|
Mark the open created for the source file on the destination
server. Then if this open is going thru a recovery, then fail
the recovery as we don't need to be recoving a "fake" open.
We need to fail the ongoing READs and vfs_copy_file_range().
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
|
|
NFSv4.2 inter server to server copy requires the destination server to
READ the data from the source server using the provided stateid and
file handle.
Given an NFSv4 stateid and filehandle from the COPY operaion, provide the
destination server with an NFS client function to create a struct file
suitable for the destiniation server to READ the data to be copied.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Andy Adamson <andros@netapp.com>
|
|
Support only one source server address: the same address that
the client and source server use.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
|
|
Try using the delegation stateid, then the open stateid.
Only NL4_NETATTR, No support for NL4_NAME and NL4_URL.
Allow only one source server address to be returned for now.
To distinguish between same server copy offload ("intra") and
a copy between different server ("inter"), do a check of server
owner identity and also make sure server is capable of doing
a copy offload.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
|
|
Currently, we are translating RPC level errors such as timeouts,
as well as interrupts etc into EOPENSTALE, which forces a single
replay of the open attempt. What we actually want to do is
force the replay only in the cases where the returned error
indicates that the file may have changed on the server.
So the fix is to spell out the exact set of errors where we want
to return EOPENSTALE.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Stable fixes:
- SUNRPC: Ensure bvecs are re-synced when we re-encode the RPC
request
- Fix an Oops in ff_layout_track_ds_error due to a PTR_ERR()
dereference
- Revert buggy NFS readdirplus optimisation
- NFSv4: Handle the special Linux file open access mode
- pnfs: Fix a problem where we gratuitously start doing I/O through
the MDS
Features:
- Allow NFS client to set up multiple TCP connections to the server
using a new 'nconnect=X' mount option. Queue length is used to
balance load.
- Enhance statistics reporting to report on all transports when using
multiple connections.
- Speed up SUNRPC by removing bh-safe spinlocks
- Add a mechanism to allow NFSv4 to request that containers set a
unique per-host identifier for when the hostname is not set.
- Ensure NFSv4 updates the lease_time after a clientid update
Bugfixes and cleanup:
- Fix use-after-free in rpcrdma_post_recvs
- Fix a memory leak when nfs_match_client() is interrupted
- Fix buggy file access checking in NFSv4 open for execute
- disable unsupported client side deduplication
- Fix spurious client disconnections
- Fix occasional RDMA transport deadlock
- Various RDMA cleanups
- Various tracepoint fixes
- Fix the TCP callback channel to guarantee the server can actually
send the number of callback requests that was negotiated at mount
time"
* tag 'nfs-for-5.3-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (68 commits)
pnfs/flexfiles: Add tracepoints for detecting pnfs fallback to MDS
pnfs: Fix a problem where we gratuitously start doing I/O through the MDS
SUNRPC: Optimise transport balancing code
SUNRPC: Ensure the bvecs are reset when we re-encode the RPC request
pnfs/flexfiles: Fix PTR_ERR() dereferences in ff_layout_track_ds_error
NFSv4: Don't use the zero stateid with layoutget
SUNRPC: Fix up backchannel slot table accounting
SUNRPC: Fix initialisation of struct rpc_xprt_switch
SUNRPC: Skip zero-refcount transports
SUNRPC: Replace division by multiplication in calculation of queue length
NFSv4: Validate the stateid before applying it to state recovery
nfs4.0: Refetch lease_time after clientid update
nfs4: Rename nfs41_setup_state_renewal
nfs4: Make nfs4_proc_get_lease_time available for nfs4.0
nfs: Fix copy-and-paste error in debug message
NFS: Replace 16 seq_printf() calls by seq_puts()
NFS: Use seq_putc() in nfs_show_stats()
Revert "NFS: readdirplus optimization by cache mechanism" (memleak)
SUNRPC: Fix transport accounting when caller specifies an rpc_xprt
NFS: Record task, client ID, and XID in xdr_status trace points
...
|
|
The NFS protocol doesn't support deduplication, so turn it off again.
Fixes: ce96e888fe48e ("Fix nfs4.2 return -EINVAL when do dedupe operation")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
According to the open() manpage, Linux reserves the access mode 3
to mean "check for read and write permission on the file and return
a file descriptor that can't be used for reading or writing."
Currently, the NFSv4 code will ask the server to open the file,
and will use an incorrect share access mode of 0. Since it has
an incorrect share access mode, the client later forgets to send
a corresponding close, meaning it can leak stateids on the server.
Fixes: ce4ef7c0a8a05 ("NFS: Split out NFS v4 file operations")
Cc: stable@vger.kernel.org # 3.6+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
We want to enable cross-filesystem copy_file_range functionality
where possible, so push the "same superblock only" checks down to
the individual filesystem callouts so they can make their own
decisions about cross-superblock copy offload and fallack to
generic_copy_file_range() for cross-superblock copy.
[Amir] We do not call ->remap_file_range() in case the files are not
on the same sb and do not call ->copy_file_range() in case the files
do not belong to the same filesystem driver.
This changes behavior of the copy_file_range(2) syscall, which will
now allow cross filesystem in-kernel copy. CIFS already supports
cross-superblock copy, between two shares to the same server. This
functionality will now be available via the copy_file_range(2) syscall.
Cc: Steve French <stfrench@microsoft.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Now that we have generic_copy_file_range(), remove it as a fallback
case when offloads fail. This puts the responsibility for executing
fallbacks on the filesystems that implement ->copy_file_range and
allows us to add operational validity checks to
generic_copy_file_range().
Rework vfs_copy_file_range() to call a new do_copy_file_range()
helper to execute the copying callout, and move calls to
generic_file_copy_range() into filesystem methods where they
currently return failures.
[Amir] overlayfs is not responsible of executing the fallback.
It is the responsibility of the underlying filesystem.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
dedupe_file_range operations is combiled into remap_file_range.
But in nfs42_remap_file_range, it's skiped for dedupe operations.
Before this patch:
# dd if=/dev/zero of=nfs/file bs=1M count=1
# xfs_io -c "dedupe nfs/file 4k 64k 4k" nfs/file
XFS_IOC_FILE_EXTENT_SAME: Invalid argument
After this patch:
# dd if=/dev/zero of=nfs/file bs=1M count=1
# xfs_io -c "dedupe nfs/file 4k 64k 4k" nfs/file
deduped 4096/4096 bytes at offset 65536
4 KiB, 1 ops; 0.0046 sec (865.988 KiB/sec and 216.4971 ops/sec)
Signed-off-by: Xiaoli Feng <fengxiaoli0714@gmail.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
vfs_fsync() has the side effect of clearing unreported writeback errors,
so we need to make sure that we do not abuse it in situations where
applications might not normally expect us to report those errors.
The solution is to replace calls to vfs_fsync() with calls to nfs_wb_all().
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
According to the NFSv4.2 spec if the input and output file is the
same file, operation should fail with EINVAL. However, linux
copy_file_range() system call has no such restrictions. Therefore,
in such case let's return EOPNOTSUPP and allow VFS to fallback
to doing do_splice_direct(). Also when copy_file_range is called
on an NFSv4.0 or 4.1 mount (ie., a server that doesn't support
COPY functionality), we also need to return EOPNOTSUPP and
fallback to a regular copy.
Fixes xfstest generic/075, generic/091, generic/112, generic/263
for all NFSv4.x versions.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Currently nfs42_proc_copy_file_range() can not return EAGAIN.
Fixes: e4648aa4f98a ("NFS recover from destination server reboot for copies")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Change the remap_file_range functions to take a number of bytes to
operate upon and return the number of bytes they operated on. This is a
requirement for allowing fs implementations to return short clone/dedupe
results to the user, which will enable us to obey resource limits in a
graceful manner.
A subsequent patch will enable copy_file_range to signal to the
->clone_file_range implementation that it can handle a short length,
which will be returned in the function's return value. For now the
short return is not implemented anywhere so the behavior won't change --
either copy_file_range manages to clone the entire range or it tries an
alternative.
Neither clone ioctl can take advantage of this, alas.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
Combine the clone_file_range and dedupe_file_range operations into a
single remap_file_range file operation dispatch since they're
fundamentally the same operation. The differences between the two can
be made in the prep functions.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
Mark the destination state to indicate a server-side copy is
happening. On detecting a reboot and recovering open state check
if any state is engaged in a server-side copy, if so, find the
copy and mark it and then signal the waiting thread. Upon wakeup,
if copy was marked then propage EAGAIN to the nfsd_copy_file_range
and restart the copy from scratch.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Warning level 2 was used: -Wimplicit-fallthrough=2
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
should've been killed by "vfs: pull btrfs clone API to vfs layer"...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
An open file description (struct file) in a given process can be
associated with two different lock owners.
It can have a Posix lock owner which will be different in each process
that has a fd on the file.
It can have a Flock owner which will be the same in all processes.
When searching for a lock stateid to use, we need to consider both of these
owners
So add a new "flock_owner" to the "nfs_open_context" (of which there
is one for each open file description).
This flock_owner does not need to be reference-counted as there is a
1-1 relation between 'struct file' and nfs open contexts,
and it will never be part of a list of contexts. So there is no need
for a 'flock_context' - just the owner is enough.
The io_count included in the (Posix) lock_context provides no
guarantee that all read-aheads that could use the state have
completed, so not supporting it for flock locks in not a serious
problem. Synchronization between flock and read-ahead can be added
later if needed.
When creating an open_context for a non-openning create call, we don't have
a 'struct file' to pass in, so the lock context gets initialized with
a NULL owner, but this will never be used.
The flock_owner is not used at all in this patch, that will come later.
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
... and kill the ->splice_read() instances that can be switched to it
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
We're not holding any locks, so both nfs_wb_all() and inode_dio_wait()
are unenforcible and have livelock potential. Just limit ourselves to
flushing out the data.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
We need to ensure that any writes to the destination file are serialised
with the copy, meaning that the writeback has to occur under the inode lock.
Also relax the writeback requirement on the source, and rely on the
stateid checking to tell us if the source rebooted. Add the helper
nfs_filemap_write_and_wait_range() to call pnfs_sync_inode() as
is appropriate for pNFS servers that may need a layoutcommit.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
This adds the copy_range file_ops function pointer used by the
sys_copy_range() function call. This patch only implements sync copies,
so if an async copy happens we decode the stateid and ignore it.
Signed-off-by: Anna Schumaker <bjschuma@netapp.com>
|
|
Pull ext4 bugfixes from Ted Ts'o:
"These changes contains a fix for overlayfs interacting with some
(badly behaved) dentry code in various file systems. These have been
reviewed by Al and the respective file system mtinainers and are going
through the ext4 tree for convenience.
This also has a few ext4 encryption bug fixes that were discovered in
Android testing (yes, we will need to get these sync'ed up with the
fs/crypto code; I'll take care of that). It also has some bug fixes
and a change to ignore the legacy quota options to allow for xfstests
regression testing of ext4's internal quota feature and to be more
consistent with how xfs handles this case"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: ignore quota mount options if the quota feature is enabled
ext4 crypto: fix some error handling
ext4: avoid calling dquot_get_next_id() if quota is not enabled
ext4: retry block allocation for failed DIO and DAX writes
ext4: add lockdep annotations for i_data_sem
ext4: allow readdir()'s of large empty directories to be interrupted
btrfs: fix crash/invalid memory access on fsync when using overlayfs
ext4 crypto: use dget_parent() in ext4_d_revalidate()
ext4: use file_dentry()
ext4: use dget_parent() in ext4_file_open()
nfs: use file_dentry()
fs: add file_dentry()
ext4 crypto: don't let data integrity writebacks fail with ENOMEM
ext4: check if in-inode xattr is corrupted in ext4_expand_extra_isize_ea()
|
|
NFS may be used as lower layer of overlayfs and accessing f_path.dentry can
lead to a crash.
Fix by replacing direct access of file->f_path.dentry with the
file_dentry() accessor, which will always return a native object.
Fixes: 4bacc9c9234c ("overlayfs: Make f_path always point to the overlay and f_inode to the underlay")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Tested-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: <stable@vger.kernel.org> # v4.2
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
|
|
The only difference to nfs_file_fsync is the call to pnfs_sync_inode. But
pnfs_sync_inode is just an inline that calls a pNFS layout driver method
if CONFIG_PNFS is designed, and thus can be called just fine from the core
NFS module.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested},
inode_foo(inode) being mutex_foo(&inode->i_mutex).
Please, use those for access to ->i_mutex; over the coming cycle
->i_mutex will become rwsem, with ->lookup() done with it held
only shared.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The btrfs clone ioctls are now adopted by other file systems, with NFS
and CIFS already having support for them, and XFS being under active
development. To avoid growth of various slightly incompatible
implementations, add one to the VFS. Note that clones are different from
file copies in several ways:
- they are atomic vs other writers
- they support whole file clones
- they support 64-bit legth clones
- they do not allow partial success (aka short writes)
- clones are expected to be a fast metadata operation
Because of that it would be rather cumbersome to try to piggyback them on
top of the recent clone_file_range infrastructure. The converse isn't
true and the clone_file_range system call could try clone file range as
a first attempt to copy, something that further patches will enable.
Based on earlier work from Peng Tao.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
The NFS CLONE_RANGE defintion was wrong and thus never worked. Fix this
by simply using the btrfs ioctl defintion.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Originally CLONE didn't allow for intra-file clones, but we recently
updated the spec to support this feature which is also supported by
local Linux file systems.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Without this for example 64-bit binaries on typical amd64 distributions
would not be able to use ioctls on NFS. For now this only affects clones.
Additionally ->compat_ioctl is defined even for non-compat builds, so
get rid of the pointless ifdef.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
It follows btrfs BTRFS_IOC_CLONE_RANGE lead on ioctl number and
arguments.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
draft-ietf-nfsv4-minorversion2-38.txt says:
Both cl_src_offset and
cl_dst_offset must be aligned to the clone block size Section 12.2.1.
The number of bytes to be cloned must be a multiple of the clone
block size, except in the case in which cl_src_offset plus the number
of bytes to be cloned is equal to the source file size.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
It can be called by user space to CLONE two files.
Follow btrfs lead and define NFS_IOC_CLONE same as BTRFS_IOC_CLONE.
Thus we don't mess up userspace with too many ioctls.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
The NFSv4 delegation spec allows the server to tell a client to limit how
much data it cache after the file is closed. In return, the server
guarantees enough free space to avoid ENOSPC situations, etc.
Prior to this patch, we assumed we could always cache aggressively after
close. Unfortunately, this causes problems with servers that set the
limit to 0 and therefore do not offer any ENOSPC guarantees.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Check opened, only update it when non-NULL.
It's not needs define an unused value for the opened
when calling _nfs4_do_open.
v3, same as v2.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Commit 9597c13b forbade opens with O_APPEND|O_DIRECT for NFSv4:
nfs: verify open flags before allowing an atomic open
Currently, you can open a NFSv4 file with O_APPEND|O_DIRECT, but cannot
fcntl(F_SETFL,...) with those flags. This flag combination is explicitly
forbidden on NFSv3 opens, and it seems like it should also be on NFSv4.
However, you can still open a file with O_DIRECT|O_APPEND if there exists a
cached dentry for the file because nfs4_file_open() is used instead of
nfs_atomic_open() and the check is bypassed. Add the check in
nfs4_file_open() as well.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Pull NFS client updates from Trond Myklebust:
"Another set of mainly bugfixes and a couple of cleanups. No new
functionality in this round.
Highlights include:
Stable patches:
- Fix a regression in /proc/self/mountstats
- Fix the pNFS flexfiles O_DIRECT support
- Fix high load average due to callback thread sleeping
Bugfixes:
- Various patches to fix the pNFS layoutcommit support
- Do not cache pNFS deviceids unless server notifications are enabled
- Fix a SUNRPC transport reconnection regression
- make debugfs file creation failure non-fatal in SUNRPC
- Another fix for circular directory warnings on NFSv4 "junctioned"
mountpoints
- Fix locking around NFSv4.2 fallocate() support
- Truncating NFSv4 file opens should also sync O_DIRECT writes
- Prevent infinite loop in rpcrdma_ep_create()
Features:
- Various improvements to the RDMA transport code's handling of
memory registration
- Various code cleanups"
* tag 'nfs-for-4.1-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (55 commits)
fs/nfs: fix new compiler warning about boolean in switch
nfs: Remove unneeded casts in nfs
NFS: Don't attempt to decode missing directory entries
Revert "nfs: replace nfs_add_stats with nfs_inc_stats when add one"
NFS: Rename idmap.c to nfs4idmap.c
NFS: Move nfs_idmap.h into fs/nfs/
NFS: Remove CONFIG_NFS_V4 checks from nfs_idmap.h
NFS: Add a stub for GETDEVICELIST
nfs: remove WARN_ON_ONCE from nfs_direct_good_bytes
nfs: fix DIO good bytes calculation
nfs: Fetch MOUNTED_ON_FILEID when updating an inode
sunrpc: make debugfs file creation failure non-fatal
nfs: fix high load average due to callback thread sleeping
NFS: Reduce time spent holding the i_mutex during fallocate()
NFS: Don't zap caches on fallocate()
xprtrdma: Make rpcrdma_{un}map_one() into inline functions
xprtrdma: Handle non-SEND completions via a callout
xprtrdma: Add "open" memreg op
xprtrdma: Add "destroy MRs" memreg op
xprtrdma: Add "reset MRs" memreg op
...
|
|
At the very least, we should not be taking the i_mutex until after
checking if the server even supports ALLOCATE or DEALLOCATE, allowing
v4.0 or v4.1 to exit without potentially waiting on a lock.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
This patch adds a GETATTR to the end of ALLOCATE and DEALLOCATE
operations so we can set the updated inode size and change attribute
directly. DEALLOCATE will still need to release pagecache pages, so
nfs42_proc_deallocate() now calls truncate_pagecache_range() before
contacting the server.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
that's the bulk of filesystem drivers dealing with inodes of their own
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
All places outside of core VFS that checked ->read and ->write for being NULL or
called the methods directly are gone now, so NULL {read,write} with non-NULL
{read,write}_iter will do the right thing in all cases.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The LAYOUTCOMMIT operation means different things to different layout types.
For blocks and objects, it is both a data and metadata consistency operation.
For files and flexfiles, it is only a metadata consistency operation.
This patch separates out the 2 cases, allowing the files/flexfiles layout
drivers to optimise away the data consistency calls to layoutcommit.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
Olga Kornievskaia
Trond Myklebust
Linus Torvalds
Darrick J. Wong
Amir Goldstein
Dave Chinner
Xiaoli Feng
Trond Myklebust
Olga Kornievskaia
Gustavo A. R. Silva
Al Viro
Greg Kroah-Hartman
NeilBrown
Trond Myklebust
Anna Schumaker
Miklos Szeredi
Christoph Hellwig
Peng Tao
Kinglong Mee
Benjamin Coddington
David Howells