aboutsummaryrefslogtreecommitdiffstats
path: root/fs/nfs/nfs4trace.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2020-01-15pNFS/flexfiles: Add tracing for layout errorsTrond Myklebust1-0/+109
Trace layout errors for pNFS/flexfiles on read/write/commit operations. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-01-15pNFS/flexfiles: Record resend attempts on I/O failureTrond Myklebust1-1/+7
If the attempt to do pNFS fails, then record what action we take to recover (resend, reset to pnfs or reset to mds). Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-01-15NFS: Fix fix of show_nfs_errorsTrond Myklebust1-16/+17
Casting a negative value to an unsigned long is not the same as converting it to its absolute value. Fixes: 96650e2effa2 ("NFS: Fix show_nfs_errors macros again") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-01-15NFSv4: Improve read/write/commit tracingTrond Myklebust1-18/+34
Ensure we always return the number of bytes read/written. Also display the pnfs filehandle if it is in use. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-01-15NFS4: Report callback authentication errorsChuck Lever1-0/+35
This seems to be a somewhat common issue with Kerberos NFSv4.0 set-ups. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-11-18NFS4: Trace lock reclaimsChuck Lever1-0/+82
One of the most frustrating messages our sustaining team sees is the "Lock reclaim failed!" message. Add some observability in the client's lock reclaim logic so we can capture better data the first time a problem occurs. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-11-18NFS4: Trace state recovery operationChuck Lever1-0/+93
Add a trace point in the main state manager loop to observe state recovery operation. Help track down state recovery bugs. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-07-18pnfs/flexfiles: Add tracepoints for detecting pnfs fallback to MDSTrond Myklebust1-1/+75
Add tracepoints to allow debugging of the event chain leading to a pnfs fallback to doing I/O through the MDS. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-07-09NFS: Record task, client ID, and XID in xdr_status trace pointsChuck Lever1-2/+13
When triggering an nfs_xdr_status trace point, record the task ID and XID of the failing RPC to better pinpoint the problem. This feels like a bit of a layering violation. Suggested-by: Trond Myklebust <trondmy@hammerspace.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-07-09NFS: Fix show_nfs_errors macros againChuck Lever1-82/+82
I noticed that NFS status values stopped working again. trace_print_symbols_seq() takes an unsigned long. Passing a negative errno or negative NFSERR value just confuses it, and since we're using C macros here and not static inline functions, all bets are off due to implicit type conversion. Straight-line the calling conventions so that error codes are stored in the trace record as positive values in an unsigned long field, mapped to symbolic as an unsigned long, and displayed as a negative value, to continue to enable grepping on "error=-". It's often the case that an error value that is positive is a byte count but when it's negative, it's an error (e.g. nfs4_write). Fix those cases so that the value that is eventually stored in the error field is a positive NFS status or errno, or zero. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-07-09NFS4: Add a trace event to record invalid CB sequence IDsChuck Lever1-0/+38
Help debug NFSv4 callback failures. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-13NFS: Add trace events to report non-zero NFS status codesChuck Lever1-0/+25
These can help field troubleshooting without needing the overhead of a full network capture (ie, tcpdump). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02NFS: Fix NFSv4 symbolic trace point outputChuck Lever1-143/+313
These symbolic values were not being displayed in string form. TRACE_DEFINE_ENUM was missing in many cases. It also turns out that __print_symbolic wants an unsigned long in the first field... Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-09-14NFSv4: Fix a tracepoint Oops in initiate_file_draining()Trond Myklebust1-1/+1
Now that the value of 'ino' can be NULL or an ERR_PTR(), we need to change the test in the tracepoint. Fixes: ce5624f7e6675 ("NFSv4: Return NFS4ERR_DELAY when a layout fails...") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: stable@vger.kernel.org # v4.17+ Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-09-14NFSv4: Fix a tracepoint Oops in initiate_file_draining()Trond Myklebust1-1/+1
Now that the value of 'ino' can be NULL or an ERR_PTR(), we need to change the test in the tracepoint. Fixes: ce5624f7e6675 ("NFSv4: Return NFS4ERR_DELAY when a layout fails...") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: stable@vger.kernel.org # v4.17+ Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-11-17Merge tag 'nfs-for-4.15-1' of git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds1-18/+8
Pull NFS client updates from Anna Schumaker: "Stable bugfixes: - Revalidate "." and ".." correctly on open - Avoid RCU usage in tracepoints - Fix ugly referral attributes - Fix a typo in nomigration mount option - Revert "NFS: Move the flock open mode check into nfs_flock()" Features: - Implement a stronger send queue accounting system for NFS over RDMA - Switch some atomics to the new refcount_t type Other bugfixes and cleanups: - Clean up access mode bits - Remove special-case revalidations in nfs_opendir() - Improve invalidating NFS over RDMA memory for async operations that time out - Handle NFS over RDMA replies with a worqueue - Handle NFS over RDMA sends with a workqueue - Fix up replaying interrupted requests - Remove dead NFS over RDMA definitions - Update NFS over RDMA copyright information - Be more consistent with bool initialization and comparisons - Mark expected switch fall throughs - Various sunrpc tracepoint cleanups - Fix various OPEN races - Fix a typo in nfs_rename() - Use common error handling code in nfs_lock_and_join_request() - Check that some structures are properly cleaned up during net_exit() - Remove net pointer from dprintk()s" * tag 'nfs-for-4.15-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (62 commits) NFS: Revert "NFS: Move the flock open mode check into nfs_flock()" NFS: Fix typo in nomigration mount option nfs: Fix ugly referral attributes NFS: super: mark expected switch fall-throughs sunrpc: remove net pointer from messages nfs: remove net pointer from messages sunrpc: exit_net cleanup check added nfs client: exit_net cleanup check added nfs/write: Use common error handling code in nfs_lock_and_join_requests() NFSv4: Replace closed stateids with the "invalid special stateid" NFSv4: nfs_set_open_stateid must not trigger state recovery for closed state NFSv4: Check the open stateid when searching for expired state NFSv4: Clean up nfs4_delegreturn_done NFSv4: cleanup nfs4_close_done NFSv4: Retry NFS4ERR_OLD_STATEID errors in layoutreturn pNFS: Retry NFS4ERR_OLD_STATEID errors in layoutreturn-on-close NFSv4: Don't try to CLOSE if the stateid 'other' field has changed NFSv4: Retry CLOSE and DELEGRETURN on NFS4ERR_OLD_STATEID. NFS: Fix a typo in nfs_rename() NFSv4: Fix open create exclusive when the server reboots ...
2017-11-17NFSv4: Add a tracepoint to document open stateid updatesTrond Myklebust1-0/+2
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-11-17NFS: Avoid RCU usage in tracepointsAnna Schumaker1-18/+6
There isn't an obvious way to acquire and release the RCU lock during a tracepoint, so we can't use the rpc_peeraddr2str() function here. Instead, rely on the client's cl_hostname, which should have similar enough information without needing an rcu_dereference(). Reported-by: Dave Jones <davej@codemonkey.org.uk> Cc: stable@vger.kernel.org # v3.12 Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-13nfs4: add NFSv4 LOOKUPP handlersJeff Layton1-0/+29
This will be needed in order to implement the get_parent export op for nfsd. Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-01-30NFS: Make trace_nfs4_setup_sequence() available to NFS v4.0Anna Schumaker1-32/+32
This tracepoint displays information about the slot that was chosen for the RPC, in addition to session information. This could be useful information for debugging, and we can set the session id hash to 0 to indicate that there is no session. Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-07-15tracing: Use __get_str() when manipulating stringsDaniel Bristot de Oliveira1-2/+2
Use __get_str(str) rather than __get_dynamic_array(str) when deadling with strings. It is just a code cleanup, no changes on tracepoint ABI. Link: http://lkml.kernel.org/r/ea260df91817411cca2a1f3db2abd88860094788.1467407618.git.bristot@redhat.com Cc: Trond Myklebust <trond.myklebust@primarydata.com> Cc: Anna Schumaker <anna.schumaker@netapp.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: linux-nfs@vger.kernel.org Suggested-by: Steven Rostedt <rostedt@goodmis.org> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-05-17pnfs: rework LAYOUTGET retry handlingJeff Layton1-2/+8
There are several problems in the way a stateid is selected for a LAYOUTGET operation: We pick a stateid to use in the RPC prepare op, but that makes it difficult to serialize LAYOUTGETs that use the open stateid. That serialization is done in pnfs_update_layout, which occurs well before the rpc_prepare operation. Between those two events, the i_lock is dropped and reacquired. pnfs_update_layout can find that the list has lsegs in it and not do any serialization, but then later pnfs_choose_layoutget_stateid ends up choosing the open stateid. This patch changes the client to select the stateid to use in the LAYOUTGET earlier, when we're searching for a usable layout segment. This way we can do it all while holding the i_lock the first time, and ensure that we serialize any LAYOUTGET call that uses a non-layout stateid. This also means a rework of how LAYOUTGET replies are handled, as we must now get the latest stateid if we want to retransmit in response to a retryable error. Most of those errors boil down to the fact that the layout state has changed in some fashion. Thus, what we really want to do is to re-search for a layout when it fails with a retryable error, so that we can avoid reissuing the RPC at all if possible. While the LAYOUTGET RPC is async, the initiating thread always waits for it to complete, so it's effectively synchronous anyway. Currently, when we need to retry a LAYOUTGET because of an error, we drive that retry via the rpc state machine. This means that once the call has been submitted, it runs until it completes. So, we must move the error handling for this RPC out of the rpc_call_done operation and into the caller. In order to handle errors like NFS4ERR_DELAY properly, we must also pass a pointer to the sliding timeout, which is now moved to the stack in pnfs_update_layout. The complicating errors are -NFS4ERR_RECALLCONFLICT and -NFS4ERR_LAYOUTTRYLATER, as those involve a timeout after which we give up and return NULL back to the caller. So, there is some special handling for those errors to ensure that the layers driving the retries can handle that appropriately. Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-01-07Merge branch 'bugfixes'Trond Myklebust1-0/+1
* bugfixes: SUNRPC: Fixup socket wait for memory SUNRPC: Fix a missing break in rpc_anyaddr() pNFS/flexfiles: Fix an Oopsable typo in ff_mirror_match_fh() NFS: Fix attribute cache revalidation NFS: Ensure we revalidate attributes before using execute_ok() NFS: Flush reclaim writes using FLUSH_COND_STABLE NFS: Background flush should not be low priority NFSv4.1/pnfs: Fixup an lo->plh_block_lgets imbalance in layoutreturn NFSv4: Don't perform cached access checks before we've OPENed the file NFS: Allow the combination pNFS and labeled NFS NFS42: handle layoutstats stateid error nfs: Fix race in __update_open_stateid() nfs: fix missing assignment in nfs4_sequence_done tracepoint
2015-12-28NFSv4: List stateid information in the callback tracepointsTrond Myklebust1-2/+67
The stateid is extremely valuable when debugging. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-12-28pNFS: Modify pnfs_update_layout tracepoints to use layout stateidTrond Myklebust1-6/+17
Instead of displaying a layout segment pointer in these tracepoints, let's use the layout stateid, now that Olga gave us a set of tools for displaying them. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-12-28nfs: add new tracepoint for pnfs_update_layoutJeff Layton1-0/+56
pnfs_update_layout is really the "nexus" of layout handling. If it returns NULL then we end up going through the MDS. This patch adds some tracepoints to that function that allow us to determine the cause when we end up going through the MDS unexpectedly. Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-12-28Adding tracepoint to cached openOlga Kornievskaia1-0/+39
Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-12-28Adding stateid information to tracepointsOlga Kornievskaia1-25/+230
Operations to which stateid information is added: close, delegreturn, open, read, setattr, layoutget, layoutcommit, test_stateid, write, lock, locku, lockt Format is "stateid=<seqid>:<crc32 hash stateid.other>", also "openstateid=", "layoutstateid=", and "lockstateid=" for open_file, layoutget, set_lock tracepoints. New function is added to internal.h, nfs_stateid_hash(), to compute the hash trace_nfs4_setattr() is moved from nfs4_do_setattr() to _nfs4_do_setattr() to get access to stateid. trace_nfs4_setattr and trace_nfs4_delegreturn are changed from INODE_EVENT to new event type, INODE_STATEID_EVENT which is same as INODE_EVENT but adds stateid information for locking tracepoints, moved trace_nfs4_set_lock() into _nfs4_do_setlk() to get access to stateid information, and removed trace_nfs4_lock_reclaim(), trace_nfs4_lock_expired() as they call into _nfs4_do_setlk() and both were previously same LOCK_EVENT type. Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-12-28nfs: fix missing assignment in nfs4_sequence_done tracepointAndrew Elble1-0/+1
status_flags not set Signed-off-by: Andrew Elble <aweits@rit.edu> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-10-06NFS: Fix a tracepoint NULL-pointer dereferenceAnna Schumaker1-1/+1
Running xfstest generic/013 with the tracepoint nfs:nfs4_open_file enabled produces a NULL-pointer dereference when calculating fileid and filehandle of the opened file. Fix this by checking if state is NULL before trying to use the inode pointer. Reported-by: Olga Kornievskaia <aglo@umich.edu> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-08-25NFSv4: Add a tracepoint for CB_LAYOUTRECALLTrond Myklebust1-0/+1
Only support for single file layoutrecall for now. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-08-25NFSv4: Add a tracepoint for CB_GETATTRTrond Myklebust1-0/+59
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-08-25NFSv4.1/pnfs: Add a tracepoint for return-on-close eventsTrond Myklebust1-0/+1
Allow tracing of return-on-close. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-04-15VFS: normal filesystems (and lustre): d_inode() annotationsDavid Howells1-2/+2
that's the bulk of filesystem drivers dealing with inodes of their own Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-06-24nfs: merge nfs_pgio_data into _headerWeston Andros Adamson1-14/+14
struct nfs_pgio_data only exists as a member of nfs_pgio_header, but is passed around everywhere, because there used to be multiple _data structs per _header. Many of these functions then use the _data to find a pointer to the _header. This patch cleans this up by merging the nfs_pgio_data structure into nfs_pgio_header and passing nfs_pgio_header around instead. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Weston Andros Adamson <dros@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-05-28NFS: Create a common read and write data structAnna Schumaker1-4/+4
At this point, the only difference between nfs_read_data and nfs_write_data is the write verifier. Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2013-08-22NFSv4.1: Add tracepoints for debugging test_stateid eventsTrond Myklebust1-0/+49
Add tracepoints to detect issues with the TEST_STATEID operation. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-08-22NFSv4.1: Add tracepoints for debugging slot table operationsTrond Myklebust1-0/+139
Add tracepoints to nfs41_setup_sequence and nfs41_sequence_done to track session and slot table state changes. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-08-22NFSv4.1: Add tracepoints for debugging layoutget/return/commitTrond Myklebust1-0/+55
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-08-22NFSv4: Add tracepoints for debugging reads and writesTrond Myklebust1-0/+154
Set up tracepoints to track read, write and commit, as well as pNFS reads and writes and commits to the data server. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-08-22NFSv4: Add tracepoints for debugging getattrTrond Myklebust1-0/+69
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-08-22NFSv4: Add tracepoints for debugging the idmapperTrond Myklebust1-0/+46
Add tracepoints to help debug uid/gid mappings to username/group. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-08-22NFSv4: Add tracepoints for debugging delegationsTrond Myklebust1-0/+72
Set up tracepoints to track when delegations are set, reclaimed, returned by the client, or recalled by the server. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-08-22NFSv4: Add tracepoints for debugging renameTrond Myklebust1-0/+43
Add tracepoints to debug renames. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-08-22NFSv4: Add tracepoints for debugging inode manipulationsTrond Myklebust1-0/+51
Set up basic tracepoints for debugging NFSv4 setattr, access, readlink, readdir, get_acl set_acl get_security_label, and set_security_label. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-08-22NFSv4: Add tracepoints for debugging lookup/create operationsTrond Myklebust1-0/+50
Set up basic tracepoints for debugging NFSv4 lookup, unlink/remove, symlink, mkdir, mknod, fs_locations and secinfo. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-08-22NFSv4: Add tracepoints for debugging file lockingTrond Myklebust1-0/+75
Set up basic tracepoints for debugging NFSv4 file lock/unlock Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-08-22NFSv4: Add tracepoints for debugging file openTrond Myklebust1-0/+125
Set up basic tracepoints for debugging NFSv4 file open/close Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-08-22NFSv4: Add tracepoints for debugging state management problemsTrond Myklebust1-0/+220
Set up basic tracepoints for debugging client id creation/destruction and session creation/destruction. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.